Yuan-Shin Lee

Study on the stability for non-uniform helix angle tools in the milling process

JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING.

A Gouge-Free Tool Axis Reorientation Method for Kinematics Compliant Avoidance of Singularity in 5-Axis Machining

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 141(5).

A Method of Generating Spiral Tool Path for Direct Three-Axis Computer Numerical Control Machining of Measured Cloud of Point

JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 19(4).

Jerk-limited feedrate scheduling and optimization for five-axis machining using new piecewise linear programming approach

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 62(7), 1067–1081.

Parametric study for asymmetric flexure hinge design for tissue cutting

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 233(4), 1302–1309.

Iso-planar feed vector-fields-based streamline tool path generation for five-axis compound surface machining with torus-end cutters

Journal of Manufacturing Science and Engineering, 140(7).

Needle geometry effect on vibration tissue cutting

Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 232(5), 827–837.

PLSP based layered contour generation from point cloud for additive manufacturing

Robotics and Computer-Integrated Manufacturing, 49, 1–12.

Spiral tool path generation method on mesh surfaces guided by radial curves

Journal of Manufacturing Science and Engineering, 140(7).

AC-pulse modulated electrohydrodynamic jet printing and electroless copper deposition for conductive microscale patterning on flexible insulating substrates

Robotics and Computer-Integrated Manufacturing, 43, 179–187.

Asymmetric flexure hinge for compliant vibrational tissue cutting

Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 4.

Direct printing and electrical characterization of conductive micro-silver tracks by alternating current-pulse modulated electrohydrodynamic jet printing

Journal of Manufacturing Science and Engineering, 139(2).

Direct printing of capacitive touch sensors on flexible substrates by additive e-jet printing with silver nanoinks

Journal of Manufacturing Science and Engineering, 139(3).

Fabrication and electrical characterization of multi-layer capacitive touch sensors on flexible substrates by additive e-jet printing

Journal of Manufacturing Processes, 28, 479–485.

Particle learning in online tool wear diagnosis and prognosis

Journal of Manufacturing Processes, 28, 457–463.

Compliant needle vibration cutting of soft tissue

Journal of Manufacturing Science and Engineering, 138(11).

Fracture mechanics model of needle cutting tissue

Journal of Manufacturing Science and Engineering, 138(1).

Intricate geometric design and manufacturing on vibration-assisted needles for medical applications

Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 2.

Analytical modeling of ultrasonic vibration assisted drilling of bones for medical surgical applications

Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 2.

Drop-on-demand E-jet printing of continuous interconnects with AC-pulse modulation on highly insulating substrates

Journal of Manufacturing Systems, 37, 505–510.

Electrohydrodynamic jet printing of silver seeds: Micro scale patterning by electroless copper deposition

Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 1.

Direct fabrication of highly conductive micro silver tracks using electrohydrodynamic jet printing for sub-20 mu m micro-manufacturing

Proceedings of the ASME 9th International Manufacturing Science and Engineering Conference, 2014, vol 2.

Evaluation of an augmented virtual reality and haptic control interface for psychomotor training

Assistive Technology, 26(1), 51–60.

High-resolution AC-pulse modulated electrohydrodynamic jet printing on highly insulating substrates

Journal of Micromechanics and Microengineering, 24(4).

Analytical modeling and excimer laser micromachining of microchannel for medical devices development

Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 3, pts A and B, 1037–1047.

Investigating human performance in a virtual reality haptic simulator as influenced by fidelity and system latency

IEEE Transactions on Systems, Man, and Cybernetics. Part A, Systems and Humans, 42(6), 1562–1566.

Laser micromachining modeling and laser machined surface errors prediction for biomedical applications

Proceedings of the ASME International Manufacturing Science and Engineering Conference, 2012, 59–68.

Improving biocompatibily of laser micromachined silicon wafer by surface coating with poly(ethylene glycol) diacrylate and diamond-like carbon for biomedical devices

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2010, vol 2, 273–280.

Hybrid client-server architecture and control techniques for collaborative product development using haptic interfaces

Computers in Industry, 61(1), 83–96.

Inkjet printing of cyanoacrylate adhesive

Journal of Adhesion, 86(1), 1–9.

Microscale patterning of two-component biomedical hydrogel

Journal of Adhesion, 86(1), 62–71.

Piezoelectric inkjet printing of medical adhesives and sealants

JOM: the Journal of the Minerals, Metals & Materials Society, 62(7), 56–60.

Laser micromachining for biomedical applications

JOM: the Journal of the Minerals, Metals & Materials Society, 61(9), 35–40.

A Visibility Sphere Marching algorithm of constructing polyhedral models for haptic sculpting and product prototyping

Robotics and Computer-Integrated Manufacturing, 21(1), 19–36.

Cutting on triangle mesh: Local model-based haptic display for dental preparation surgery simulation

IEEE Transactions on Visualization and Computer Graphics, 11(6), 671–683.

Material side tracing and curve refinement for pencil-cut machining of complex polyhedral models

Computer-Aided Design, 37(10), 1015–1026.

Optimal tool orientation for five-axis tool-end machining by swept envelope approach

Journal of Manufacturing Science and Engineering, 127(4), 810–818.

Clean-up tool path generation by contraction tool method for machining complex polyhedral models

Computers in Industry, 54(1), 17–33.

Dexel-based force-torque rendering and volume updating for 5-DOF haptic product prototyping and virtual sculpting

Computers in Industry, 55(2), 125–145.

Five-axis pencil-cut planning and virtual prototyping with 5-DOF haptic interface

Computer-Aided Design, 36(13), 1295–1307.

Numerical control machining of triangulated sculptured surfaces in a stereo lithography format with a generalized cutter

International Journal of Production Research, 42(13), 2573–2598.

Greedy tool heuristic approach to rough milling of complex shaped pockets

IIE Transactions, 35(10), 953–963.

Locally optimal cutting positions for 5-axis sculptured surface machining

Computer-Aided Design, 35(1), 69–81.

Optimizing tool orientations for 5-axis machining by configuration-space search method

Computer-Aided Design, 35(6), 549–566.

A machining potential field approach to tool path generation for multi-axis sculptured surface machining

Computer-Aided Design, 34(5), 357–371.

Adaptive ruled layers approximation of STL models and multiaxis machining applications for rapid prototyping

Journal of Manufacturing Systems, 21(3), 153–166.

Material engagement analysis of different endmills for adaptive feedrate control in milling processes

Computers in Industry, 47(1), 55–76.

Non-uniform offsetting and hollowing objects by using biarcs fitting for rapid prototyping processes

Computers in Industry, 47(1), 1–23.

Swept surface determination for five-axis numerical control machining

International Journal of Machine Tools & Manufacture, 42(14), 1497–1507.

Optimal planning of parallel machining operation

In Handbook of computational intelligence in design and manufacturing. CRC Press.

Rolling-ball method and contour marching approach to identifying critical regions for complex surface machining

Computers in Industry, 41(2), 163–180.

Smoothing STL files by max-fit biarc curves for rapid prototyping

Rapid Prototyping Journal, 6(3), 186–203.

A shape-generating approach for multi-axis machining G-buffer models

Computer-Aided Design, 31(12), 761–776.

Adaptive tool path planning for 5-axis sculptured surface machining by machining strip evaluation

Machining impossible shapes: IFIP TC5 WG5.3 International Conference on Sculptured Surfaces (SSM98), November 5-11, 1998, Chrysler Technology Center, Michigan, 351–360. Boston: Kluwer Academic.

Application of virtual convex polytope in transforming protrusions for automated process planning

Computers & Industrial Engineering, 36(1), 67–96.

Motor incipient fault detection using artificial neural

In Computer-aided maintenance: methodologies and practices (Manufacturing systems engineering series ; 5). (pp. 263–280).

Sequencing parallel machining operations by genetic algorithms

Computers & Industrial Engineering, 36(2), 259–280.

Unfolded projection approach to machining non-coaxial parts on mill-turn machines

Computers in Industry, 39(2), 147–173.

Detection of loops and singularities of surface intersections

Computer-Aided Design, 30(14), 1059–1067.

Ellipse offset approach to multi-axis roughing and finishing of ruled surface pockets

Computer-Aided Design, 30(12), 957–971.

Mathematical modelling using different endmills and tool placement problems for 4- and 5-axis NC complex surface machining

International Journal of Production Research, 36(3), 785–814.

Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining

Computer-Aided Design, 30(7), 559–570.

Operation scheduling of mill/turn machining centers with genetic algorithms

Proceedings of the Fourth Joint Conference of Information Sciences. 1998, 2(1998), 437–440.

Optimal cutter selection and machining plane determination for process planning and NC machining of complex surfaces

Journal of Manufacturing Systems, 17(5), 371–388.

Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining

Computer-Aided Design, 29(7), 507–521.

Surface interrogation and machining strip evaluation for 5-axis CNC die and mold machining

International Journal of Production Research, 35(1), 225–252.