Yuntian Zhu

Zhang, L., Kowalik, M., Mao, Q., Damirchi, B., Zhang, Y., Bradford, P. D., … Zhu, Y. T. T. (2023). Joint Theoretical and Experimental Study of Stress Graphitization in Aligned Carbon Nanotube/Carbon Matrix Composites. ACS APPLIED MATERIALS & INTERFACES, 15(27), 32656–32666. https://doi.org/10.1021/acsami.3c03209

Fan, L., Zhou, J., Fang, X., Wang, Y., Ma, X., Tsai, M.-H., & Zhu, Y. (2023). Probing the Respective Strengthening Mechanism of High-entropy (CoCrFeNi/CoCrFeNiMn) and Single-principle-element (Cu-4Al) Alloys. JOURNAL OF ALLOYS AND COMPOUNDS, 969. https://doi.org/10.1016/j.jallcom.2023.172185

Fang, X. T., Li, Z. K., Wang, Y. F., Ruiz, M., Ma, X. L., Wang, H. Y., … Zhu, Y. T. (2022). Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures. Journal of Materials Science & Technology, 98, 244–247. https://doi.org/10.1016/j.jmst.2021.03.088

Xiao, L., Chen, X., Wei, K., Liu, Y., Yin, D., Hu, Z., … Zhu, Y. (2021). Effect of dislocation configuration on Ag segregation in subgrain boundary of a Mg-Ag alloy. SCRIPTA MATERIALIA, 191, 219–224. https://doi.org/10.1016/j.scriptamat.2020.08.040

Zhu, Y., Ameyama, K., Anderson, P. M., Beyerlein, I. J., Gao, H., Kim, H. S., … Wu, X. (2021). Heterostructured materials: superior properties from hetero-zone interaction. MATERIALS RESEARCH LETTERS, 9(1), 1–31. https://doi.org/10.1080/21663831.2020.1796836

Zhang, L., Ma, X., Zhang, Y., Bradford, P. D., & Zhu, Y. T. (2021). Length-dependent carbon nanotube film structures and mechanical properties. NANOTECHNOLOGY, 32(26). https://doi.org/10.1088/1361-6528/abef92

Ding, Z., Zhao, G., Sun, H., Li, S., Ma, F., Lavernia, E. J., … Liu, W. (2020). Alloying effects on the plasticity of magnesium: comprehensive analysis of influences of all five slip systems. JOURNAL OF PHYSICS-CONDENSED MATTER, 32(1). https://doi.org/10.1088/1361-648X/ab445d

Chen, X. F., Xiao, L. R., Ding, Z. G., Liu, W., Zhu, Y. T., & Wu, X. L. (2020). Atomic segregation at twin boundaries in a Mg-Ag alloy. SCRIPTA MATERIALIA, 178, 193–197. https://doi.org/10.1016/j.scriptamat.2019.11.025

Liu, Y., Cao, Y., Mao, Q., Zhou, H., Zhao, Y., Jiang, W., … Zhu, Y. (2020). Critical microstructures and defects in heterostructured materials and their effects on mechanical properties. ACTA MATERIALIA, 189, 129–144. https://doi.org/10.1016/j.actamat.2020.03.001

Wang, Y., Huang, C., Li, Y., Guo, F., He, Q., Wang, M., … Zhu, Y. (2020). Dense dispersed shear bands in gradient-structured Ni. INTERNATIONAL JOURNAL OF PLASTICITY, 124, 186–198. https://doi.org/10.1016/j.ijplas.2019.08.012

Wu, X., Zhu, Y., & Lu, K. (2020). Ductility and strain hardening in gradient and lamellar structured materials. SCRIPTA MATERIALIA, 186, 321–325. https://doi.org/10.1016/j.scriptamat.2020.05.025

Fang, X. T., He, G. Z., Zheng, C., Ma, X. L., Kaoumi, D., Li, Y. S., & Zhu, Y. T. (2020). Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass. ACTA MATERIALIA, 186, 644–655. https://doi.org/10.1016/j.actamat.2020.01.037

Liu, J., Hu, R., Zheng, J., Zhang, Y., Ding, Z., Liu, W., … Sha, G. (2020). Formation of solute nanostructures in an Al-Zn-Mg alloy during long-term natural aging. JOURNAL OF ALLOYS AND COMPOUNDS, 821. https://doi.org/10.1016/j.jallcom.2019.153572

Guo, F. J., Wang, Y. F., Wang, M. S., He, Q., Ran, H., Huang, C. X., & Zhu, Y. T. (2020). Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 782. https://doi.org/10.1016/j.msea.2020.139256

Liu, S., Zhang, J., Chen, X., Huang, G., Xia, D., Tang, A., … Pan, F. (2020). Improving mechanical properties of heterogeneous Mg-Gd alloy laminate via accumulated extrusion bonding. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 785. https://doi.org/10.1016/j.msea.2020.139324

Nie, J., Lu, F., Huang, Z., Ma, X., Zhou, H., Chen, C., … Zhu, Y. (2020). Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network. MATERIALIA, 9. https://doi.org/10.1016/j.mtla.2019.100523

Zhang, J., Cao, Y., Gao, H., Yang, X., Shu, B., Zhu, Y. T., … Zhu, X. (2020). Influence of Strain Rate on Mechanical Behaviours of Gradient-Structured Copper. MATERIALS TRANSACTIONS, 61(4), 708–717. https://doi.org/10.2320/matertrans.MT-M2019373

Chen, X., Li, Y., Zhu, Y., Chen, Y., & Yang, B. (2020). Layer-by-layer corrosion behavior of 316LN stainless steel with a gradient-nanostructured surface. ELECTROCHEMISTRY COMMUNICATIONS, 110. https://doi.org/10.1016/j.elecom.2019.106642

Liu, Y., Cao, Y., Zhou, H., Chen, X., Liu, Y., Xiao, L., … Zhu, Y. (2020). Mechanical Properties and Microstructures of Commercial-Purity Aluminum Processed by Rotational Accelerated Shot Peening Plus Cold Rolling. ADVANCED ENGINEERING MATERIALS, 22(1). https://doi.org/10.1002/adem.201900478

Zhao, Y. H., Bingert, J. F., Topping, T. D., Sun, P. L., Liao, X. Z., Zhu, Y. T., & Lavernia, E. J. (2020). Mechanical behavior, deformation mechanism and microstructure evolutions of ultrafine-grained Al during recovery via annealing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 772. https://doi.org/10.1016/j.msea.2019.138706

Liu, S., Guo, Y. Z., Pan, Z. L., Liao, X. Z., Lavernia, E. J., Zhu, Y. T., … Zhao, Y. (2020). Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 54, 31–39. https://doi.org/10.1016/j.jmst.2020.03.042

Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., … Zhu, Y. (2020). Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys. MATERIALS TODAY, 41, 62–71. https://doi.org/10.1016/j.mattod.2020.09.029

Jiang, W., Zhou, H., Cao, Y., Nie, J., Li, Y., Zhao, Y., … Zhu, Y. (2020). On the Heterogeneity of Local Shear Strain Induced by High-Pressure Torsion. ADVANCED ENGINEERING MATERIALS, 22(1). https://doi.org/10.1002/adem.201900477

Wang, Y., Huang, C., Li, Z., Fang, X., Wang, M., He, Q., … Zhu, Y. (2020). Shear band stability and uniform elongation of gradient structured material: Role of lateral constraint. EXTREME MECHANICS LETTERS, 37. https://doi.org/10.1016/j.eml.2020.100686

Xiao, L. R., Chen, X. F., Cao, Y., Zhou, H., Ma, X. L., Yin, D. D., … Zhu, Y. T. (2020). Solute segregation assisted nanocrystallization of a cold-rolled Mg-Ag alloy during annealing. SCRIPTA MATERIALIA, 177, 69–73. https://doi.org/10.1016/j.scriptamat.2019.10.012

Li, Z. K., Fang, X. T., Wang, Y. F., Jiang, P., Wang, J. J., Liu, C. M., … Koch, C. C. (2020). Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 777. https://doi.org/10.1016/j.msea.2020.139074

Gao, B., Lai, Q., Cao, Y., Hu, R., Xiao, L., Pan, Z., … Zhu, Y. (2020). Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling. SCIENCE ADVANCES, 6(39). https://doi.org/10.1126/sciadv.aba8169

Ma, X., Li, F., Sun, Z., Hou, J., Fang, X., Zhu, Y., & Koch, C. C. (2019). Achieving Gradient Martensite Structure and Enhanced Mechanical Properties in a Metastable beta Titanium Alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(5), 2126–2138. https://doi.org/10.1007/s11661-019-05157-5

Yuan, F., Yan, D., Sun, J., Zhou, L., Zhu, Y., & Wu, X. (2019). Ductility by shear band delocalization in the nano-layer of gradient structure. MATERIALS RESEARCH LETTERS, 7(1), 12–17. https://doi.org/10.1080/21663831.2018.1546238

Chen, X., Li, Y., Zhu, Y., & Yang, B. (2019). Enhanced irradiation and corrosion resistance of 316LN stainless steel with high densities of dislocations and twins. JOURNAL OF NUCLEAR MATERIALS, 517, 234–240. https://doi.org/10.1016/j.jnucmat.2019.02.016

Huang, Z. W., Jin, S. B., Zhou, H., Li, Y. S., Cao, Y., & Zhu, Y. T. (2019). Evolution of twinning systems and variants during sequential twinning in cryo-rolled titanium. International Journal of Plasticity, 112, 52–67. https://doi.org/10.1016/J.IJPLAS.2018.08.008

Wang, Y. F., Wang, M. S., Fang, X. T., Guo, F. J., Liu, H. Q., Scattergood, R. O., … Zhu, Y. T. (2019). Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces. INTERNATIONAL JOURNAL OF PLASTICITY, 123, 196–207. https://doi.org/10.1016/j.ijplas.2019.07.019

Chen, X., Huang, G.-sheng, Liu, S.-shuai, Han, T.-zhuang, Jiang, B., Tang, A.-tao, … Pan, F.-sheng. (2019). Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 29(3), 437–447. https://doi.org/10.1016/S1003-6326(19)64953-8

Li, Y., Dai, L., Cao, Y., Zhao, Y., & Zhu, Y. (2019). Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy. JOURNAL OF MATERIALS RESEARCH, 34(13), 2398–2405. https://doi.org/10.1557/jmr.2019.194

Wang, Y. F., Huang, C. X., He, Q., Guo, F. J., Wang, M. S., Song, L. Y., & Zhu, Y. T. (2019). Heterostructure induced dispersive shear bands in heterostructured Cu. SCRIPTA MATERIALIA, 170, 76–80. https://doi.org/10.1016/j.scriptamat.2019.05.036

Chen, X., Li, Y., Zhu, Y., Bai, Y., & Yang, B. (2019). Improved corrosion resistance of 316LN stainless steel performed by rotationally accelerated shot peening. APPLIED SURFACE SCIENCE, 481, 1305–1312. https://doi.org/10.1016/j.apsusc.2019.03.256

Zhou, H., Huang, C., Sha, X., Xiao, L., Ma, X., Hoeppel, H. W., … Zhu, Y. (2019). In-situ observation of dislocation dynamics near heterostructured interfaces. MATERIALS RESEARCH LETTERS, 7(9), 376–382. https://doi.org/10.1080/21663831.2019.1616330

Fang, X. T., He, G. Z., Ruiz, M., Zheng, C., Wang, Y. F., Li, Z. K., & Zhu, Y. T. (2019). Influence of annealing parameters on the mechanical properties of heterogeneous lamella structured 5083 aluminum alloy. LETTERS ON MATERIALS, 9(4), 556–560. https://doi.org/10.22226/2410-3535-2019-4-556-560

Huang, A. H., Wang, Y. F., Wang, M. S., Song, L. Y., Li, Y. S., Gao, L., … Zhu, Y. T. (2019). Optimizing the strength, ductility and electrical conductivity of a Cu-Cr-Zr alloy by rotary swaging and aging treatment. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 746, 211–216. https://doi.org/10.1016/j.msea.2019.01.002

Zhu, Y., & Wu, X. (2019). Perspective on hetero-deformation induced (HDI) hardening and back stress. MATERIALS RESEARCH LETTERS, 7(10), 393–398. https://doi.org/10.1080/21663831.2019.1616331

Sun, H., Ding, Z., Zhang, D., Zhou, H., Li, S., Lavernia, E. J., … Liu, W. (2019). Predicting the formation of < c. MATERIALIA, 7. https://doi.org/10.1016/j.mtla.2019.100352

Yang, B., Chen, X., Zhu, Y., & Li, Y. (2019). Radiation and Corrosion Resistances of 316LN Austenitic Stainless Steel by Rotationally Accelerated Shot Peening. TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1251–1260. https://doi.org/10.1007/978-3-030-05861-6_119

Yang, M.-X., Li, R.-G., Jiang, P., Yuan, F.-P., Wang, Y.-D., Zhu, Y.-T., & Wu, X.-L. (2019). Residual stress provides significant strengthening and ductility in gradient structured materials. MATERIALS RESEARCH LETTERS, 7(11), 433–438. https://doi.org/10.1080/21663831.2019.1635537

Hasan, M. N., Liu, Y. F., An, X. H., Gu, J., Song, M., Cao, Y., … Liao, X. Z. (2019). Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures. INTERNATIONAL JOURNAL OF PLASTICITY, 123, 178–195. https://doi.org/10.1016/j.ijplas.2019.07.017

Xiao, L. R., Cao, Y., Li, S., Zhou, H., Ma, X. L., Mao, L., … al. (2019). The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy. ACTA MATERIALIA, 162, 214–225. https://doi.org/10.1016/j.actamat.2018.10.005

Liu, Y., Wang, F., Cao, Y., Nie, J., Zhou, H., Yang, H., … Zhu, Y. (2019). Unique defect evolution during the plastic deformation of a metal matrix composite. SCRIPTA MATERIALIA, 162, 316–320. https://doi.org/10.1016/j.scriptamat.2018.11.038

Zhao, J., Zhang, X., Huang, Y., Zou, J., Liu, T., Liang, N., … Li, Q. (2018). A comparison of the twisted and untwisted structures for one-dimensional carbon nanotube assemblies. Materials & Design, 146, 20–27. https://doi.org/10.1016/J.MATDES.2018.02.068

Liang, N., Liu, J., Lin, S., Wang, Y., Wang, J. T., Zhao, Y., & Zhu, Y. (2018). A multiscale architectured CuCrZr alloy with high strength, electrical conductivity and thermal stability. Journal of Alloys and Compounds, 735, 1389–1394. https://doi.org/10.1016/J.JALLCOM.2017.11.309

Yu, Y., Zhao, C., Li, Q., Li, J., & Zhu, Y. (2018). A novel approach to align carbon nanotubes via water-assisted shear stretching. COMPOSITES SCIENCE AND TECHNOLOGY, 164, 1–7. https://doi.org/10.1016/j.compscitech.2018.05.028

Ho, D. N., Yildiz, O., Bradford, P., Zhu, Y., & Fedkiw, P. S. (2018). A silicon-impregnated carbon nanotube mat as a lithium-ion cell anode. JOURNAL OF APPLIED ELECTROCHEMISTRY, 48(1), 127–133. https://doi.org/10.1007/s10800-017-1140-8

College, D. A., & Zhu, Y. (2018). Alleviating surface tensile stress in e-beam treated tool steels by cryogenic treatment. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 722, 167–172. https://doi.org/10.1016/j.msea.2018.03.036

Zhu, Y. (2018). Catch twin nucleation in action at atomic scale. Science China Materials, 61(7), 1019–1020. https://doi.org/10.1007/S40843-018-9212-7

Zhu, Y. T., & Wu, X. L. (2018). Ductility and plasticity of nanostructured metals: differences and issues. Materials Today Nano, 2, 15–20. https://doi.org/10.1016/J.MTNANO.2018.09.004

Fu, Z., Zhang, Z., Meng, L., Shu, B., Zhu, Y., & Zhu, X. (2018). Effect of strain rate on mechanical properties of Cu/Ni multilayered composites processed by electrodeposition. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 726, 154–159. https://doi.org/10.1016/j.msea.2018.04.076

Liu, X., Yuan, F., Zhu, Y., & Wu, X. (2018). Extraordinary Bauschinger effect in gradient structured copper. SCRIPTA MATERIALIA, 150, 57–60. https://doi.org/10.1016/j.scriptamat.2018.03.007

Han, T., Huang, G., Deng, Q., Wang, G., Jiang, B., Tang, A., … Pan, F. (2018). Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding. JOURNAL OF ALLOYS AND COMPOUNDS, 745, 599–608. https://doi.org/10.1016/j.jallcom.2018.02.248

Liang, N., Zhao, Y., Li, Y., Topping, T., Zhu, Y., Valiev, R. Z., & Lavernia, E. J. (2018). Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 53(18), 13173–13185. https://doi.org/10.1007/s10853-018-2548-1

Huang, C. X., Wang, Y. F., Ma, X. L., Yin, S., Höppel, H. W., Göken, M., … Zhu, Y. T. (2018). Interface affected zone for optimal strength and ductility in heterogeneous laminate. Materials Today, 21(7), 713–719. https://doi.org/10.1016/J.MATTOD.2018.03.006

Zou, J., Liu, D., Zhao, J., Hou, L., Liu, T., Zhang, X., … Li, Q. (2018). Ni Nanobuffer Layer Provides Light-Weight CNT/Cu Fibers with Superior Robustness, Conductivity, and Ampacity. ACS APPLIED MATERIALS & INTERFACES, 10(9), 8197–8204. https://doi.org/10.1021/acsami.7b19012

Ding, Z., Liu, W., Sun, H., Li, S., Zhang, D., Zhao, Y., … Zhu, Y. (2018). Origins and dissociation of pyramidal <c + a> dislocations in magnesium and its alloys. ACTA MATERIALIA, 146, 265–272. https://doi.org/10.1016/j.actamat.2017.12.049

Wang, Y. F., Huang, C. X., Wang, M. S., Li, Y. S., & Zhu, Y. T. (2018). Quantifying the synergetic strengthening in gradient material. SCRIPTA MATERIALIA, 150, 22–25. https://doi.org/10.1016/j.scriptamat.2018.02.039

Ovid'ko, I. A., Valiev, R. Z., & Zhu, Y. T. (2018). [Review of Review on superior strength and enhanced ductility of metallic nanomaterials]. PROGRESS IN MATERIALS SCIENCE, 94, 462–540. https://doi.org/10.1016/j.pmatsci.2018.02.002

Cao, Y., Ni, S., Liao, X., Song, M., & Zhu, Y. (2018). [Review of Structural evolutions of metallic materials processed by severe plastic deformation]. MATERIALS SCIENCE & ENGINEERING R-REPORTS, 133, 1–59. https://doi.org/10.1016/j.mser.2018.06.001

Li, J., Cao, Y., Gao, B., Li, Y., & Zhu, Y. (2018). Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure. JOURNAL OF MATERIALS SCIENCE, 53(14), 10442–10456. https://doi.org/10.1007/s10853-018-2322-4

Hu, X. Z., Jin, S. B., Zhou, H., Yin, Z., Yang, J., Gong, Y. L., … Zhu, X. K. (2017). Bauschinger effect and back stress in gradient Cu-Ge alloy. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 48A(9), 3943–3950. https://doi.org/10.1007/s11661-017-4176-9

Liang, N., Zhao, Y., Wang, J., & Zhu, Y. (2017). Effect of grain structure on Charpy impact behavior of copper. SCIENTIFIC REPORTS, 7. https://doi.org/10.1038/srep44783

Liu, S., Pan, Z. L., Zhao, Y. H., Topping, T., Valiev, R. Z., Liao, X. Z., … Wei, Q. (2017). Effect of strain rate on the mechanical properties of a gum metal with various microstructures. ACTA MATERIALIA, 132, 193–208. https://doi.org/10.1016/j.actamat.2017.04.052

Wang, X., Li, Y. S., Zhang, Q., Zhao, Y. H., & Zhu, Y. T. (2017). Gradient Structured Copper by Rotationally Accelerated Shot Peening. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 33(7), 758–761. https://doi.org/10.1016/j.jmst.2016.11.006

Bian, X., Yuan, F., Zhu, Y., & Wu, X. (2017). Gradient structure produces superior dynamic shear properties. MATERIALS RESEARCH LETTERS, 5(7), 501–507. https://doi.org/10.1080/21663831.2017.1334715

Wu, X., & Zhu, Y. (2017). Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Materials Research Letters, 5(8), 527–532. https://doi.org/10.1080/21663831.2017.1343208

Huang, S.-Y., Li, Q., Zhu, Y., & Fedkiw, P. S. (2017). Investigation and modification of carbon buckypaper as an electrocatalyst support for oxygen reduction. JOURNAL OF APPLIED ELECTROCHEMISTRY, 47(1), 105–115. https://doi.org/10.1007/s10800-016-1023-4

Yu, Y., Zhang, L., Yildiz, O., Deng, H., Zhao, C., Bradford, P. D., … Zhu, Y. (2017). Investigation of microcombing parameters in enhancing the properties of carbon nanotube yarns. MATERIALS & DESIGN, 134, 181–187. https://doi.org/10.1016/j.matdes.2017.08.035

Zhao, Y. H., & Zhu, Y. T. (2017). Lattice expansion and grain boundary excess volume of nanocrystalline se prepared by mechanical milling. Reviews on Advanced Materials Science, 48(1), 52–61.

Goken, M., Eggeler, G., Zhu, Y. T., & Lu, L. (2017). Mechanical properties and microstructure of advanced metallic alloys in honor of Prof. Hael Mughrabi - Part A fracture and fatigue introduction. Journal of Materials Research, 32(23), 4273–4275.

Goken, M., Eggeler, G., Zhu, Y. T., & Lu, L. (2017). Mechanical properties and microstructure of advanced metallic alloys in honor of Prof. Hael Mughrabi - Part B - high temperature and nanomaterials introduction. Journal of Materials Research, 32(24), 4463–4465.

Li, Y. S., Li, L. Z., Nie, J. F., Cao, Y., Zhao, Y. H., & Zhu, Y. T. (2017). [Review of Microstructural evolution and mechanical properties of a 5052 Al alloy with gradient structures]. Journal of Materials Research, 32(23), 4443–4451.

Tang, L., Zhao, Y., Islamgaliev, R. K., Valiev, R. Z., & Zhu, Y. T. (2017). Microstructure Microstructure and thermal stability of nanocrystalline Mg-Gd-Y-Zr alloy processed by high pressure torsion. JOURNAL OF ALLOYS AND COMPOUNDS, 721, 577–585. https://doi.org/10.1016/j.jallcom.2017.05.164

Nie, J. F., Wang, F., Li, Y. S., Cao, Y., Liu, X. F., Zhao, Y. H., & Zhu, Y. T. (2017). Microstructure evolution and mechanical properties of Al-TiB2/TiC in situ aluminum-based composites during Accumulative Roll Bonding (ARB) process. Materials, 10(2).

Xu, W., Zhang, Y., Cheng, G., Mathaudhu, S. N., Scattergood, R. O., Koch, C. C., … Zhu, Y. (2017). On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium. ACTA MATERIALIA, 131, 457–466. https://doi.org/10.1016/j.actamat.2017.04.015

Faraji, S., Yildiz, O., Rost, C., Stano, K., Farahbakhsh, N., Zhu, Y., & Bradford, P. D. (2017). Radial growth of multi-walled carbon nanotubes in aligned sheets through cyclic carbon deposition and graphitization. CARBON, 111, 411–418. https://doi.org/10.1016/j.carbon.2016.10.012

Zou, J., Zhang, X., Xu, C., Zhao, J., Zhu, Y. T., & Li, Q. (2017). Soldering carbon nanotube fibers by targeted electrothermal-induced carbon deposition. CARBON, 121, 242–247. https://doi.org/10.1016/j.carbon.2017.05.091

Bian, X., Yuan, F., Wu, X., & Zhu, Y. (2017, September). The Evolution of Strain Gradient and Anisotropy in Gradient-Structured Metal. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 48A, pp. 3951–3960. https://doi.org/10.1007/s11661-017-4199-2

Tang, L., Liu, W., Ding, Z., Zhang, D., Zhao, Y., Lavernia, E. J., & Zhu, Y. (2016). Alloying Mg with Gd and Y: Increasing both plasticity and strength. COMPUTATIONAL MATERIALS SCIENCE, 115, 85–91. https://doi.org/10.1016/j.commatsci.2016.01.003

Yuan, H., Tsai, M.-H., Sha, G., Liu, F., Horita, Z., Zhu, Y., & Wang, J. T. (2016). Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation. JOURNAL OF ALLOYS AND COMPOUNDS, 686, 15–23. https://doi.org/10.1016/j.jallcom.2016.05.337

Yang, M., Pan, Y., Yuan, F., Zhu, Y., & Wu, X. (2016). Back stress strengthening and strain hardening in gradient structure. MATERIALS RESEARCH LETTERS, 4(3), 145–151. https://doi.org/10.1080/21663831.2016.1153004

Wu, X. L., Yang, M. X., Yuan, F. P., Chen, L., & Zhu, Y. T. (2016). Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility. ACTA MATERIALIA, 112, 337–346. https://doi.org/10.1016/j.actamat.2016.04.045

Ding, Z., Liu, W., Li, S., Zhang, D., Zhao, Y., Lavernia, E. J., & Zhu, Y. (2016). Contribution of van der Waals forces to the plasticity of magnesium. ACTA MATERIALIA, 107, 127–132. https://doi.org/10.1016/j.actamat.2016.01.026

Wu, Y. F., Li, S., Ding, Z. G., Liu, W., Zhao, Y. H., & Zhu, Y. T. (2016). Effect of charge redistribution factor on stacking-fault energies of Mg-based binary alloys. SCRIPTA MATERIALIA, 112, 101–105. https://doi.org/10.1016/j.scriptamat.2015.09.023

Xu, W., Li, L., Valdez, J. A., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2016). Effect of nano-oxide particle size on radiation resistance of iron-chromium alloys. JOURNAL OF NUCLEAR MATERIALS, 469, 72–81. https://doi.org/10.1016/j.jnucmat.2015.11.044

Liu, S. L., Ma, X. L., Li, L. Z., Zhang, L. W., Trimby, P. W., Liao, X. Z., … Zhu, Y. T. (2016). Effect of triple junctions on deformation twinning in a nanostructured Cu-Zn alloy: A statistical study using transmission Kikuchi diffraction. Beilstein Journal of Nanotechnology, 7, 1501–1506.

Tang, L., Zhao, Y., Islamgaliev, R. K., Tsao, C. Y. A., Valiev, R. Z., Lavernia, E. J., & Zhu, Y. T. (2016). Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 670, 280–291. https://doi.org/10.1016/j.msea.2016.06.031

Nie, J. F., Liu, M. X., Wang, F., Zhao, Y. H., Li, Y. S., Cao, Y., & Zhu, Y. T. (2016). Fabrication of Al/Mg/Al composites via accumulative roll bonding and their mechanical properties. Materials, 9(11).

Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zehetbauer, M. J., & Zhu, Y. T. (2016). Fundamentals of Superior Properties in Bulk NanoSPD Materials. MATERIALS RESEARCH LETTERS, 4(1), 1–21. https://doi.org/10.1080/21663831.2015.1060543

Cheng, G. M., Xu, W. Z., Wang, Y. Q., Misra, A., & Zhu, Y. T. (2016). Grain size effect on radiation tolerance of nanocrystalline Mo. SCRIPTA MATERIALIA, 123, 90–94. https://doi.org/10.1016/j.scriptamat.2016.06.007

Tang, L., Zhao, Y., Liang, N., Islamgaliev, R. K., Valiev, R. Z., & Zhu, Y. T. (2016). Localized deformation via multiple twinning in a Mg-Gd-Y-Zr alloy processed by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 677, 68–75. https://doi.org/10.1016/j.msea.2016.09.005

Ma, X., Huang, C., Moering, J., Ruppert, M., Hoeppel, H. W., Goeken, M., … Zhu, Y. (2016). Mechanical properties of copper/bronze laminates: Role of interfaces. ACTA MATERIALIA, 116, 43–52. https://doi.org/10.1016/j.actamat.2016.06.023

Zhang, L., Wang, X., Li, R., Li, Q., Bradford, P. D., & Zhu, Y. (2016). Microcombing enables high-performance carbon nanotube composites. COMPOSITES SCIENCE AND TECHNOLOGY, 123, 92–98. https://doi.org/10.1016/j.compscitech.2015.12.012

An, X. H., Lin, Q. Y., Sha, G., Huang, M. X., Ringer, S. P., Zhu, Y. T., & Liao, X. Z. (2016). Microstructural evolution and phase transformation in twinning induced plasticity steel induced by high-pressure torsion. ACTA MATERIALIA, 109, 300–313. https://doi.org/10.1016/j.actamat.2016.02.045

Dai, S., Zhu, Y., & Huang, Z. (2016). Microstructure and tensile behaviour of pure titanium produced after high-energy shot peening. MATERIALS SCIENCE AND TECHNOLOGY, 32(13), 1323–1329. https://doi.org/10.1080/02670836.2015.1121598

Dai, S., Zhu, Y., & Huang, Z. (2016). Microstructure evolution and strengthening mechanisms of pure titanium with nano-structured surface obtained by high energy shot peening. VACUUM, 125, 215–221. https://doi.org/10.1016/j.vacuum.2016.01.001

Fang, X., Ma, X., Zhang, L., & Zhu, Y. (2016). Nucleation of deformation twins in nanocrystalline fcc alloys. PHILOSOPHICAL MAGAZINE, 96(36), 3790–3802. https://doi.org/10.1080/14786435.2016.1240379

Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zehetbauer, M. J., & Zhu, Y. (2016). Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later. JOM, 68(4), 1216–1226. https://doi.org/10.1007/s11837-016-1820-6

Qiu, L., Wang, X. T., Su, G. P., Tang, D. W., Zheng, X. H., Zhu, J., … al. (2016). Remarkably enhanced thermal transport based on a flexible horizontally-aligned carbon nanotube array film. SCIENTIFIC REPORTS, 6. https://doi.org/10.1038/srep21014

Yin, Z., Yang, X., Ma, X., Moering, J., Yang, J., Gong, Y., … Zhu, X. (2016). Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment. MATERIALS & DESIGN, 105, 89–95. https://doi.org/10.1016/j.matdes.2016.05.015

Zou, J., Zhang, X., Zhao, J., Lei, C., Zhao, Y., Zhu, Y., & Li, Q. (2016). Strengthening and toughening effects by strapping carbon nanotube cross-links with polymer molecules. COMPOSITES SCIENCE AND TECHNOLOGY, 135, 123–127. https://doi.org/10.1016/j.compscitech.2016.09.019

Moering, J., Ma, X., Malkin, J., Yang, M., Zhu, Y., & Mathaudhu, S. (2016). Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod. SCRIPTA MATERIALIA, 122, 106–109. https://doi.org/10.1016/j.scriptamat.2016.05.006

Wu, J., Li, X., Cao, H., Pan, Y., & Zhu, Y. (2016). Ultraviolet light irradiation on pitting corrosion of Cu-based bulk metallic glasses. JOURNAL OF ALLOYS AND COMPOUNDS, 661, 345–348. https://doi.org/10.1016/j.jallcom.2015.11.189

Gu, P., Zhu, Y., & Mathaudhu, S. N. (2015). A model for < c plus a & rang; dislocation transmission across nano-spaced parallel basal stacking faults in a HCP alloy. PHILOSOPHICAL MAGAZINE LETTERS, 95(1), 58–66. https://doi.org/10.1080/09500839.2015.1008066

Ma, X. L., Xu, W. Z., Zhou, H., Moering, J. A., Narayan, J., & Zhu, Y. T. (2015). Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu-Zn alloys. PHILOSOPHICAL MAGAZINE, 95(3), 301–310. https://doi.org/10.1080/14786435.2014.1000418

Huang, C. X., Hu, W. P., Wang, Q. Y., Wang, C., Yang, G., & Zhu, Y. T. (2015). An Ideal Ultrafine-Grained Structure for High Strength and High Ductility. MATERIALS RESEARCH LETTERS, 3(2), 88–94. https://doi.org/10.1080/21663831.2014.968680

Tao, J., Chen, G., Jian, W., Wang, J., Zhu, Y., Zhu, X., & Langdon, T. G. (2015). Anneal hardening of a nanostructured Cu-Al alloy processed by high-pressure torsion and rolling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 628, 207–215. https://doi.org/10.1016/j.msea.2015.01.055

An, X. H., Zhu, S. M., Cao, Y., Kawasaki, M., Liao, X. Z., Ringer, S. P., … Zhu, Y. T. (2015). Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites. Applied Physics Letters, 107(1), 011901. https://doi.org/10.1063/1.4926370

An, X. H., Zhu, S. M., Cao, Y., Kawasaki, M., Liao, X. Z., Ringer, S. P., … Zhu, Y. T. (2015). Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites. Applied Physics Letters, 107(1).

Zhou, H., Cheng, G. M., Ma, X. L., Xu, W. Z., Mathaudhu, S. N., Wang, Q. D., & Zhu, Y. T. (2015). Effect of Ag on interfacial segregation in Mg-Gd-Y-(Ag)-Zr alloy. ACTA MATERIALIA, 95, 20–29. https://doi.org/10.1016/j.actamat.2015.05.020

Li, X., Jiang, J.-hua, Zhao, Y.-hao, Ma, A.-bin, Wen, D.-jing, & Zhu, Y.-tian. (2015). Effect of equal-channel angular pressing and aging on corrosion behavior of ZK60 Mg alloy. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 25(12), 3909–3920. https://doi.org/10.1016/s1003-6326(15)64038-9

Wu, F., Zheng, J. K., Cai, W., Yao, N., Zhu, Y. T., & Narayan, J. (2015). Fabrication of epitaxial Cu3Ge on sapphire with controlled crystallinity and planar defects. JOURNAL OF ALLOYS AND COMPOUNDS, 641, 238–243. https://doi.org/10.1016/j.jallcom.2015.03.143

Cao, Y., Wang, Y. B., An, X. H., Liao, X. Z., Kawasaki, M., Ringer, S. P., … Zhu, Y. T. (2015). Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins. SCRIPTA MATERIALIA, 100, 98–101. https://doi.org/10.1016/j.scriptamat.2015.01.001

Wu, X., Yang, M., Yuan, F., Wu, G., Wei, Y., Huang, X., & Zhu, Y. (2015). Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 112(47), 14501–14505. https://doi.org/10.1073/pnas.1517193112

Yang, X., Ma, X., Moering, J., Zhou, H., Wang, W., Gong, Y., … Zhu, X. (2015). Influence of gradient structure volume fraction on the mechanical properties of pure copper. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 645, 280–285. https://doi.org/10.1016/j.msea.2015.08.037

Li, L., Xu, W., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2015). Influence of scandium addition on the high-temperature grain size stabilization of oxide-dispersion-strengthened (ODS) ferritic alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 636, 565–571. https://doi.org/10.1016/j.msea.2015.03.117

Li, L., Xu, W., Saber, M., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2015). Long-term stability of 14YT-4Sc alloy at high temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 647, 222–228. https://doi.org/10.1016/j.msea.2015.09.012

Xu, W., Li, L., Saber, M., Koch, C. C., Zhu, Y., & Scattergood, R. O. (2015). Microstructures and Stabilization Mechanisms of Nanocrystalline Iron-Chromium Alloys with Hafnium Addition. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(9), 4394–4404. https://doi.org/10.1007/s11661-015-2985-2

Ma, X. L., Zhou, H., Narayan, J., & Zhu, Y. T. (2015). Stacking-fault energy effect on zero-strain deformation twinning in nanocrystalline Cu-Zn alloys. SCRIPTA MATERIALIA, 109, 89–93. https://doi.org/10.1016/j.scriptamat.2015.07.027

Ma, X. L., Huang, C. X., Xu, W. Z., Zhou, H., Wu, X. L., & Zhu, Y. T. (2015). Strain hardening and ductility in a coarse-grain/nanostructure laminate material. SCRIPTA MATERIALIA, 103, 57–60. https://doi.org/10.1016/j.scriptamat.2015.03.006

Zhang, L., Wang, X., Xu, W., Zhang, Y., Li, Q., Bradford, P. D., & Zhu, Y. (2015). Strong and Conductive Dry Carbon Nanotube Films by Microcombing. SMALL, 11(31), 3830–3836. https://doi.org/10.1002/smll.201500111

Yuan, Y., Ma, A., Gou, X., Jiang, J., Lu, F., Song, D., & Zhu, Y. (2015). Superior mechanical properties of ZK60 mg alloy processed by equal channel angular pressing and rolling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 630, 45–50. https://doi.org/10.1016/j.msea.2015.02.004

Moering, J., Ma, X., Chen, G., Miao, P., Li, G., Qian, G., … Zhu, Y. (2015). The role of shear strain on texture and microstructural gradients in low carbon steel processed by Surface Mechanical Attrition Treatment. SCRIPTA MATERIALIA, 108, 100–103. https://doi.org/10.1016/j.scriptamat.2015.06.027

Faraji, S., Stano, K. L., Yildiz, O., Li, A., Zhu, Y., & Bradford, P. D. (2015). Ultralight anisotropic foams from layered aligned carbon nanotube sheets. NANOSCALE, 7(40), 17038–17047. https://doi.org/10.1039/c5nr03899e

Zhou, H., Xu, W. Z., Jian, W. W., Cheng, G. M., Ma, X. L., Guo, W., … Zhu, Y. T. (2014). A new metastable precipitate phase in Mg-Gd-Y-Zr alloy. PHILOSOPHICAL MAGAZINE, 94(21), 2403–2409. https://doi.org/10.1080/14786435.2014.913115

Cao, Y., Wang, Y. B., An, X. H., Liao, X. Z., Kawasaki, M., Ringer, S. P., … Zhu, Y. T. (2014). Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion. ACTA MATERIALIA, 63, 16–29. https://doi.org/10.1016/j.actamat.2013.09.030

Di, J., Wang, X., Xing, Y., Zhang, Y., Zhang, X., Lu, W., … Zhu, Y. T. (2014). Dry-Processable Carbon Nanotubes for Functional Devices and Composites. Small, 10(22), 4606–4625. https://doi.org/10.1002/SMLL.201401465

Di, J. T., Wang, X., Xing, Y. J., Zhang, Y. Y., Zhang, X. H., Lu, W. B., … Zhu, Y. T. T. (2014). [Review of Dry-processable carbon nanotubes for functional devices and composites]. Small (Weinheim An Der Bergstrasse, Germany), 10(22), 4606–4625.

Xu, W. Z., Zhang, Y. F., Cheng, G. M., Jian, W. W., Millett, P. C., Koch, C. C., … Zhu, Y. T. (2014). Dynamic Void Growth and Shrinkage in Mg under Electron Irradiation. Materials Research Letters, 2(3), 176–183. https://doi.org/10.1080/21663831.2014.904826

Ni, S., Liao, X. Z., & Zhu, Y. T. (2014). Effect of severe plastic deformation on the structure and mechanical properties of bulk nanocrystalline metals. Acta Metallurgica Sinica, 50(2), 156–168.

Wu, X. L., Jiang, P., Chen, L., Yuan, F., & Zhu, Y. T. (2014). Extraordinary strain hardening by gradient structure. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 111(20), 7197–7201. https://doi.org/10.1073/pnas.1324069111

Li, L., Saber, M., Xu, W., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2014). High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 613, 289–295. https://doi.org/10.1016/j.msea.2014.06.099

Wu, F., Zhu, Y. T., & Narayan, J. (2013). Macroscopic Twinning Strain in Nanocrystalline Cu. Materials Research Letters, 2(2), 63–69. https://doi.org/10.1080/21663831.2013.862874

Zhou, Z., Wang, X., Faraji, S., Bradford, P. D., Li, Q., & Zhu, Y. (2014). Mechanical and electrical properties of aligned carbon nanotube/carbon matrix composites. CARBON, 75, 307–313. https://doi.org/10.1016/j.carbon.2014.04.008

Jiang, Q., Wang, X., Zhu, Y., Hui, D., & Qiu, Y. (2014). Mechanical, electrical and thermal properties of aligned carbon nanotube/polyimide composites. COMPOSITES PART B-ENGINEERING, 56, 408–412. https://doi.org/10.1016/j.compositesb.2013.08.064

Xu, W. Z., Li, L. L., Saber, M., Koch, C. C., Zhu, Y. T., & Scattergood, R. O. (2014). Nano ZrO2 particles in nanocrystalline Fe-14Cr-1.5Zr alloy powders. JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 434–439. https://doi.org/10.1016/j.jnucmat.2014.05.067

Piyawit, W., Xu, W. Z., Mathaudhu, S. N., Freudenberger, J., Rigsbee, J. M., & Zhu, Y. T. (2014). Nucleation and growth mechanism of Ag precipitates in a CuAgZr alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 610, 85–90. https://doi.org/10.1016/j.msea.2014.05.023

Mathaudhu, S. N., Estrin, Y., Horita, Z., Lavernia, E., Liao, X. Z., Lu, L., … Zhu, Y. T. (2014, October). Preface to the special issue on ultrafine-grained materials. JOURNAL OF MATERIALS SCIENCE, Vol. 49, pp. 6485–6486. https://doi.org/10.1007/s10853-014-8393-y

Saber, M., Xu, W., Li, L., Zhu, Y., Koch, C. C., & Scattergood, R. O. (2014). Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: Comparing as-milled and as-milled/annealed alloys using S/TEM. JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 223–229. https://doi.org/10.1016/j.jnucmat.2014.05.014

Thiagarajan, V., Wang, X., Bradford, P. D., Zhu, Y. T., & Yuan, F. G. (2014). Stabilizing carbon nanotube yarns using chemical vapor infiltration. COMPOSITES SCIENCE AND TECHNOLOGY, 90, 82–87. https://doi.org/10.1016/j.compscitech.2013.10.008

Gu, P., Dao, M., & Zhu, Y. (2014). Strengthening at nanoscaled coherent twin boundary in f.c.c. metals. PHILOSOPHICAL MAGAZINE, 94(11), 1249–1262. https://doi.org/10.1080/14786435.2014.885138

Faraji, S., Stano, K., Rost, C., Maria, J.-P., Zhu, Y., & Bradford, P. D. (2014). Structural annealing of carbon coated aligned multi-walled carbon nanotube sheets. Carbon, 79, 113–122. https://doi.org/10.1016/j.carbon.2014.07.049

Wu, X. L., Jiang, P., Chen, L., Zhang, J. F., Yuan, F. P., & Zhu, Y. T. (2014). Synergetic Strengthening by Gradient Structure. Materials Research Letters, 2(4), 185–191. https://doi.org/10.1080/21663831.2014.935821

Wu, F., Rao, S. S., Prater, J. T., Zhu, Y. T., & Narayan, J. (2014). [Review of Tuning exchange bias in epitaxial Ni/MgO/TiN heterostructures integrated on Si(100)]. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 18(5), 263–268. https://doi.org/10.1016/j.cossms.2014.09.002

An, X. H., Song, M., Huang, Y., Liao, X. Z., Ringer, S. P., Langdon, T. G., & Zhu, Y. T. (2014). Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy. SCRIPTA MATERIALIA, 72-73, 35–38. https://doi.org/10.1016/j.scriptamat.2013.10.014

Schmidt, A. C., Wang, X., Zhu, Y., & Sombers, L. A. (2013). Carbon Nanotube Yarn Electrodes for Enhanced Detection of Neurotransmitter Dynamics in Live Brain Tissue. ACS NANO, 7(9), 7864–7873. https://doi.org/10.1021/nn402857u

Cao, Y., Wang, Y. B., Chen, Z. B., Liao, X. Z., Kawasaki, M., Ringer, S. P., … Zhu, Y. T. (2013). De-twinning via secondary twinning in face-centered cubic alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 578, 110–114. https://doi.org/10.1016/j.msea.2013.04.075

Cheng, G. M., Yuan, H., Jian, W. W., Xu, W. Z., Millett, P. C., & Zhu, Y. T. (2013). Deformation-induced omega phase in nanocrystalline Mo. SCRIPTA MATERIALIA, 68(2), 130–133. https://doi.org/10.1016/j.scriptamat.2012.09.033

Cheng, G. M., Xu, W. Z., Jian, W. W., Yuan, H., Tsai, M. H., Zhu, Y. T., … Millett, P. C. (2013). Dislocations with edge components in nanocrystalline bcc Mo. Journal of Materials Research, 28(13), 1820–1826. https://doi.org/10.1557/jmr.2012.403

Zhu, Y. T., Jia, Q., Barsoum, M. W., Mathaudhu, S., Misra, A., Nan, C., & Raabe, D. (2013). Editorial. Materials Research Letters, 1(1), 1–2. https://doi.org/10.1080/21663831.2013.779091

Wang, X., Jiang, Q., Xu, W., Cai, W., Inoue, Y., & Zhu, Y. (2013). Effect of carbon nanotube length on thermal, electrical and mechanical properties of CNT/bismaleimide composites. CARBON, 53, 145–152. https://doi.org/10.1016/j.carbon.2012.10.041

Wang, Y. B., Liao, X. Z., Zhao, Y. H., Cooley, J. C., Horita, Z., & Zhu, Y. T. (2013). Elemental separation in nanocrystalline Cu-Al alloys. Applied Physics Letters, 102(23). https://doi.org/10.1063/1.4811157

Li, L., Qian, C.-xiang, Zhao, Y.-hao, & Zhu, Y.-tian. (2013). Enzyme kinetic characterization of microbe-produced urease for microbe-driven calcite mineralization. REACTION KINETICS MECHANISMS AND CATALYSIS, 108(1), 51–57. https://doi.org/10.1007/s11144-012-0487-4

Bufford, D., Liu, Y., Zhu, Y., Bi, Z., Jia, Q. X., Wang, H., & Zhang, X. (2013). Formation Mechanisms of High-density Growth Twins in Aluminum with High Stacking-Fault Energy. Materials Research Letters, 1(1), 51–60. https://doi.org/10.1080/21663831.2012.761654

Cheng, G. M., Jian, W. W., Xu, W. Z., Yuan, H., Millett, P. C., & Zhu, Y. T. (2013). Grain Size Effect on Deformation Mechanisms of Nanocrystalline bcc Metals. Materials Research Letters, 1(1), 26–31. https://doi.org/10.1080/21663831.2012.739580

Zhu, Y. T., Liao, X. Z., Wu, X. L., & Narayan, J. (2013). Grain size effect on deformation twinning and detwinning. JOURNAL OF MATERIALS SCIENCE, 48(13), 4467–4475. https://doi.org/10.1007/s10853-013-7140-0

Wu, F., Zhu, Y. T., & Narayan, J. (2013). Grain size effect on twin density in as-deposited nanocrystalline Cu film. Philosophical Magazine, 93(35), 4355–4363. https://doi.org/10.1080/14786435.2013.829251

Xu, W., Zhang, Y., Cheng, G., Jian, W., Millett, P. C., Koch, C. C., … Zhu, Y. (2013). In-situ atomic-scale observation of irradiation-induced void formation. NATURE COMMUNICATIONS, 4. https://doi.org/10.1038/ncomms3288

Tsai, M.-H., Yuan, H., Cheng, G., Xu, W., Tsai, K.-Y., Tsai, C.-W., … Zhu, Y. T. (2013). Morphology, structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high-entropy alloy. INTERMETALLICS, 32, 329–336. https://doi.org/10.1016/j.intermet.2012.07.036

Yuan, Y., Ma, A., Jiang, J., Lu, F., Jian, W., Song, D., & Zhu, Y. T. (2013). Optimizing the strength and ductility of AZ91 Mg alloy by ECAP and subsequent aging. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 588, 329–334. https://doi.org/10.1016/j.msea.2013.09.052

Jian, W. W., Cheng, G. M., Xu, W. Z., Koch, C. C., Wang, Q. D., Zhu, Y. T., & Mathaudhu, S. N. (2013). Physics and model of strengthening by parallel stacking faults. Applied Physics Letters, 103(13), 133108. https://doi.org/10.1063/1.4822323

Zhu, Y. (2013). Preface. Journal of Materials Science, 48(13), 4459–4460. https://doi.org/10.1007/S10853-013-7324-7

Tsai, M.-H., Yuan, H., Cheng, G., Xu, W., Jian, W. W., Chuang, M.-H., … al. (2013). Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy. INTERMETALLICS, 33, 81–86. https://doi.org/10.1016/j.intermet.2012.09.022

Zhu, Y. T. (2013). Special issue: Nanostructured materials preface. Journal of Materials Science, 48(13), 4459–4460.

Zu, M., Li, Q., Zhu, Y., Zhu, Y., Wang, G., Byun, J.-H., & Chou, T.-W. (2013). Stress relaxation in carbon nanotube-based fibers for load-bearing applications. Carbon, 52, 347–355. https://doi.org/10.1016/j.carbon.2012.09.036

Xiao, Z., Li, Z., Zhu, A., Zhao, Y., Chen, J., & Zhu, Y. (2013). Surface characterization and corrosion behavior of a novel gold-imitation copper alloy with high tarnish resistance in salt spray environment. Corrosion Science, 76, 42–51. https://doi.org/10.1016/J.CORSCI.2013.05.026

Wu, F., Wen, H. M., Lavernia, E. J., Narayan, J., & Zhu, Y. T. (2013). Twin intersection mechanisms in nanocrystalline fcc metals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 585, 292–296. https://doi.org/10.1016/j.msea.2013.07.063

Zheng, B., Li, Y., Xu, W., Zhou, Y., Mathaudhu, S. N., Zhu, Y., & Lavernia, E. J. (2013). Twinning in cryomilled nanocrystalline Mg powder. PHILOSOPHICAL MAGAZINE LETTERS, 93(8), 457–464. https://doi.org/10.1080/09500839.2013.801567

Jian, W. W., Cheng, G. M., Xu, W. Z., Yuan, H., Tsai, M. H., Wang, Q. D., … Mathaudhu, S. N. (2013). Ultrastrong Mg Alloy via Nano-spaced Stacking Faults. Materials Research Letters, 1(2), 61–66. https://doi.org/10.1080/21663831.2013.765927

Wang, X., Yong, Z. Z., Li, Q. W., Bradford, P. D., Liu, W., Tucker, D. S., … Zhu, Y. T. (2012). Ultrastrong, Stiff and Multifunctional Carbon Nanotube Composites. Materials Research Letters, 1(1), 19–25. https://doi.org/10.1080/21663831.2012.686586

Zhang, Y., Ronning, F., Gofryk, K., Mara, N. A., Haberkorn, N., Zou, G., … Jia, Q. (2012). Aligned carbon nanotubes sandwiched in epitaxial NbC film for enhanced superconductivity. Nanoscale, 4(7), 2268–2271. https://doi.org/10.1039/c2nr11906d

Cao, Y., Wang, Y. B., Liao, X. Z., Kawasaki, M., Ringer, S. P., Langdon, T. G., & Zhu, Y. T. (2012). Applied stress controls the production of nano-twins in coarse-grained metals. Applied Physics Letters, 101(23). https://doi.org/10.1063/1.4769216

Zu, M., Lu, W., Li, Q.-W., Zhu, Y., Wang, G., & Chou, T.-W. (2012). Characterization of Carbon Nanotube Fiber Compressive Properties Using Tensile Recoil Measurement. ACS NANO, 6(5), 4288–4297. https://doi.org/10.1021/nn300857d

Li, L., Fu, M.-lai, Zhao, Y.-hao, & Zhu, Y.-tian. (2012). Characterization of carbonic anhydrase II from Chlorella vulgaris in bio-CO2 capture. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 19(9), 4227–4232. https://doi.org/10.1007/s11356-012-1077-8

Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2012). [Review of Deformation twinning in nanocrystalline materials]. PROGRESS IN MATERIALS SCIENCE, 57(1), 1–62. https://doi.org/10.1016/j.pmatsci.2011.05.001

Liu, W., Zhao, H., Inoue, Y., Wang, X., Bradford, P. D., Kim, H., … Zhu, Y. (2012). Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 43(4), 587–592. https://doi.org/10.1016/j.compositesa.2011.12.029

Mathaudhu, S. N., Huang, X., Kim, H. S., Langdon, T. G., Lowe, T. C., Valiev, R. Z., … Zhu, Y. T. (2012, November). Preface to the special issue on ultrafine-grained materials. JOURNAL OF MATERIALS SCIENCE, Vol. 47, pp. 7717–7718. https://doi.org/10.1007/s10853-012-6735-1

Ni, S., Wang, Y. B., Liao, X. Z., Figueiredo, R. B., Li, H. Q., Ringer, S. P., … Zhu, Y. T. (2012). The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials. ACTA MATERIALIA, 60(6-7), 3181–3189. https://doi.org/10.1016/j.actamat.2012.02.026

Zu, M., Li, Q., Zhu, Y., Dey, M., Wang, G., Lu, W., … Chou, T.-W. (2012). The effective interfacial shear strength of carbon nanotube fibers in an epoxy matrix characterized by a microdroplet test. Carbon, 50(3), 1271–1279. https://doi.org/10.1016/j.carbon.2011.10.047

Hodge, A. M., Furnish, T. A., Shute, C. J., Liao, Y., Huang, X., Hong, C. S., … Weertman, J. R. (2012). Twin stability in highly nanotwinned Cu under compression, torsion and tension. SCRIPTA MATERIALIA, 66(11), 872–877. https://doi.org/10.1016/j.scriptamat.2012.01.027

Di, J., Hu, D., Chen, H., Yong, Z., Chen, M., Feng, Z., … Li, Q. (2012). Ultrastrong, Foldable, and Highly Conductive Carbon Nanotube Film. ACS NANO, 6(6), 5457–5464. https://doi.org/10.1021/nn301321j

Xu, F., Wang, X., Zhu, Y., & Zhu, Y. (2012). Wavy Ribbons of Carbon Nanotubes for Stretchable Conductors. ADVANCED FUNCTIONAL MATERIALS, 22(6), 1279–1283. https://doi.org/10.1002/adfm.201102032

Han, J., Su, X. M., Jin, Z.-H., & Zhu, Y. T. (2011). Basal-plane stacking-fault energies of Mg: A first-principles study of Li- and Al-alloying effects. SCRIPTA MATERIALIA, 64(8), 693–696. https://doi.org/10.1016/j.scriptamat.2010.11.034

Meng, F., Zhang, X., Xu, G., Yong, Z., Chen, H., Chen, M., … Zhu, Y. (2011). Carbon Nanotube Composite Films with Switchable Transparency. ACS APPLIED MATERIALS & INTERFACES, 3(3), 658–661. https://doi.org/10.1021/am200114r

Wang, X., Krommenhoek, P. J., Bradford, P. D., Gong, B., Tracy, J. B., Parsons, G. N., … Zhu, Y. T. (2011). Coating Alumina on Catalytic Iron Oxide Nanoparticles for Synthesizing Vertically Aligned Carbon Nanotube Arrays. ACS Applied Materials & Interfaces, 3(11), 4180–4184. https://doi.org/10.1021/am201082m

Wu, X. L., Youssef, K. M., Koch, C. C., Mathaudhu, S. N., Kecskes, L. J., & Zhu, Y. T. (2011). Deformation twinning in a nanocrystalline hcp Mg alloy. SCRIPTA MATERIALIA, 64(3), 213–216. https://doi.org/10.1016/j.scriptamat.2010.10.024

Zhu, Y. T., Wu, X. L., Liao, X. Z., Narayan, J., Kecskes, L. J., & Mathaudhu, S. N. (2011). Dislocation-twin interactions in nanocrystalline fcc metals. ACTA MATERIALIA, 59(2), 812–821. https://doi.org/10.1016/j.actamat.2010.10.028

Ni, S., Wang, Y. B., Liao, X. Z., Li, H. Q., Figueiredo, R. B., Ringer, S. P., … Zhu, Y. T. (2011). Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals. Physical Review B, 84(23). https://doi.org/10.1103/PhysRevB.84.235401

Ni, S., Sha, G., Wang, Y. B., Liao, X. Z., Alhajeri, S. N., Li, H. Q., … Ringer, S. P. (2011). Elemental redistribution in a nanocrystalline Ni-Fe alloy induced by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(25-26), 7500–7505. https://doi.org/10.1016/j.msea.2011.06.057

Ni, S., Wang, Y. B., Liao, X. Z., Alhajeri, S. N., Li, H. Q., Ringer, S. P., … Langdon, T. G. (2011). Grain Size Effect on Deformation Twinning and De-Twinning in a Nanocrystalline Ni-Fe Alloy. Nanomaterials By Severe Plastic Deformation: Nanospd5, Pts 1 and 2, 667-669, 181–186. https://doi.org/10.4028/www.scientific.net/MSF.667-669.181

Ni, S., Wang, Y. B., Liao, X. Z., Alhajeri, S. N., Li, H. Q., Zhao, Y. H., … al. (2011). Grain growth and dislocation density evolution in a nanocrystalline Ni-Fe alloy induced by high-pressure torsion. SCRIPTA MATERIALIA, 64(4), 327–330. https://doi.org/10.1016/j.scriptamat.2010.10.027

Youssef, K. M., Wang, Y. B., Liao, X. Z., Mathaudhu, S. N., Kecskes, L. J., Zhu, Y. T., & Koch, C. C. (2011). High hardness in a nanocrystalline Mg97Y2Zn1 alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(25-26), 7494–7499. https://doi.org/10.1016/j.msea.2011.06.017

Shute, C. J., Myers, B. D., Liao, Y., Li, S.-Y., Hodge, A. M., Barbee, T. W., Jr., … Weertman, J. R. (2011). High-pressure torsion of copper samples containing columns of highly aligned nanotwins. SCRIPTA MATERIALIA, 65(10), 899–902. https://doi.org/10.1016/j.scriptamat.2011.08.004

Zou, G. F., Luo, H. M., Baily, S., Zhang, Y. Y., Haberkorn, N. F., Xiong, J., … Jia, Q. X. (2011). Highly aligned carbon nanotube forests coated by superconducting NbC. NATURE COMMUNICATIONS, 2. https://doi.org/10.1038/ncomms1438

Wang, X., Bradford, P. D., Liu, W., Zhao, H., Inoue, Y., Maria, J.-P., … Zhu, Y. (2011). Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching. COMPOSITES SCIENCE AND TECHNOLOGY, 71(14), 1677–1683. https://doi.org/10.1016/j.compscitech.2011.07.023

Liu, W., Zhang, X., Xu, G., Bradford, P. D., Wang, X., Zhao, H., … Zhu, Y. (2011). Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray. CARBON, 49(14), 4786–4791. https://doi.org/10.1016/j.carbon.2011.06.089

Ni, S., Wang, Y. B., Liao, X. Z., Alhajeri, S. N., Li, H. Q., Zhao, Y. H., … al. (2011). Strain hardening and softening in a nanocrystalline Ni-Fe alloy induced by severe plastic deformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(9), 3398–3403. https://doi.org/10.1016/j.msea.2011.01.017

Ni, S., Wang, Y. B., Liao, X. Z., Figueiredo, R. B., Li, H. Q., Zhao, Y. H., … al. (2011). Strain softening in nanocrystalline Ni-Fe alloy induced by large HPT revolutions. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(13-14), 4807–4811. https://doi.org/10.1016/j.msea.2011.03.007

Deng, F., Lu, W., Zhao, H., Zhu, Y., Kim, B.-S., & Chou, T.-W. (2011). The properties of dry-spun carbon nanotube fibers and their interfacial shear strength in an epoxy composite. CARBON, 49(5), 1752–1757. https://doi.org/10.1016/j.carbon.2010.12.061

Cao, Y., Wang, Y. B., Figueiredo, R. B., Chang, L., Liao, X. Z., Kawasaki, M., … al. (2011). Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution. Acta Materialia, 59(10), 3903–3914. https://doi.org/10.1016/j.actamat.2011.03.015

Bradford, P. D., Wang, X., Zhao, H., & Zhu, Y. T. (2011). Tuning the compressive mechanical properties of carbon nanotube foam. CARBON, 49(8), 2834–2841. https://doi.org/10.1016/j.carbon.2011.03.012

Zhang, X., Li, X., Mara, N., Zhu, Y., Minor, A., & Huang, R. (2010, April). "Mechanical Behavior of Nanostructured Materials". METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 41A, pp. 777–777. https://doi.org/10.1007/s11661-010-0205-7

Bradford, P. D., Wang, X., Zhao, H., Maria, J.-P., Jia, Q., & Zhu, Y. T. (2010). A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes. COMPOSITES SCIENCE AND TECHNOLOGY, 70(13), 1980–1985. https://doi.org/10.1016/j.compscitech.2010.07.020

Cao, Y., Wang, Y. B., Alhajeri, S. N., Liao, X. Z., Zheng, W. L., Ringer, S. P., … Zhu, Y. T. (2010). A visualization of shear strain in processing by high-pressure torsion. JOURNAL OF MATERIALS SCIENCE, 45(3), 765–770. https://doi.org/10.1007/s10853-009-3998-2

Zhao, H., Bradford, P. D., Wang, X., Liu, W., Luo, T. J. M., Jia, Q., … Yuan, F.-G. (2010). An intermetallic Fe-Zr catalyst used for growing long carbon nanotube arrays. MATERIALS LETTERS, 64(18), 1947–1950. https://doi.org/10.1016/j.matlet.2010.05.045

Zhao, H., Zhang, Y., Bradford, P. D., Zhou, Q., Jia, Q., Yuan, F.-G., & Zhu, Y. (2010). Carbon nanotube yarn strain sensors. NANOTECHNOLOGY, 21(30). https://doi.org/10.1088/0957-4484/21/30/305502

Sarma, V. S., Jian, W. W., Wang, J., Conrad, H., & Zhu, Y. T. (2010, September). Effect of rolling temperature on the evolution of defects and properties of an Al-Cu alloy. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4846–4850. https://doi.org/10.1007/s10853-010-4484-6

Wang, Y. B., Zhao, Y. H., Lian, Q., Liao, X. Z., Valiev, R. Z., Ringer, S. P., … Lavernia, E. J. (2010). Grain size and reversible beta-to-omega phase transformation in a Ti alloy. SCRIPTA MATERIALIA, 63(6), 613–616. https://doi.org/10.1016/j.scriptamat.2010.05.045

Wang, Y. B., Louie, M., Cao, Y., Liao, X. Z., Li, H. J., Ringer, S. P., & Zhu, Y. T. (2010). High-pressure torsion induced microstructural evolution in a hexagonal close-packed Zr alloy. SCRIPTA MATERIALIA, 62(4), 214–217. https://doi.org/10.1016/j.scriptamat.2009.10.034

Li, Y., Zhao, Y. H., Liu, W., Xu, C., Horita, Z., Liao, X. Z., … Lavernia, E. J. (2010). Influence of grain size on the density of deformation twins in Cu-30%Zn alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(16-17), 3942–3948. https://doi.org/10.1016/j.msea.2010.02.076

Kaddurah-Daouk, R., Baillie, R. A., Zhu, H., Zeng, Z.-B., Wiest, M. M., Nguyen, U. T., … Krauss, R. M. (2010). Lipidomic analysis of variation in response to simvastatin in the Cholesterol and Pharmacogenetics Study. Metabolomics, 6(2), 191–201. https://doi.org/10.1007/s11306-010-0207-x

Liddicoat, P. V., Liao, X. Z., Zhao, Y. H., Zhu, Y. T., Murashkin, M. Y., Lavernia, E. J., … Ringer, S. P. (2010). Nanostructural hierarchy increases the strength of aluminium alloys. Nature Communications, 1. https://doi.org/10.1038/ncomms1062

Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E., & Zhu, Y. T. (2010, September). Nanostructured materials by mechanical alloying: new results on property enhancement. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4725–4732. https://doi.org/10.1007/s10853-010-4252-7

Zhang, Y. Y., Sheehan, C. J., Zhai, J. Y., Zou, G. F., Luo, H. M., Xiong, J., … Jia, Q. X. (2010). Polymer-Embedded Carbon Nanotube Ribbons for Stretchable Conductors. Advanced Materials, 22(28), 3027–3031. https://doi.org/10.1002/adma.200904426

Zhu, Y. T., Mathaudhu, S. N., Goken, M., Langdon, T. G., Lowe, T. C., Semiatin, S. L., … Zhao, Y. H. (2010, September). Preface to the Special Issue on Ultrafine Grained Materials. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4543–4544. https://doi.org/10.1007/s10853-010-4709-8

Zhu, Y. T., Valiev, R. Z., Langdon, T. G., Tsuji, N., & Lu, K. (2010). Processing of nanostructured metals and alloys via plastic deformation. Mrs Bulletin, 35(12), 977–981.

Sarma, V. S., Wang, J., Jian, W. W., Kauffmann, A., Conrad, H., Freudenberger, J., & Zhu, Y. T. (2010). Role of stacking fault energy in strengthening due to cryo-deformation of FCC metals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(29-30), 7624–7630. https://doi.org/10.1016/j.msea.2010.08.015

Zhao, Y., Zhu, Y., & Lavernia, E. J. (2010). Strategies for Improving Tensile Ductility of Bulk Nanostructured Materials. ADVANCED ENGINEERING MATERIALS, 12(8), 769–778. https://doi.org/10.1002/adem.200900335

Hwang, J. Y., Singh, A. R. P., Chaudhari, M., Tiley, J., Zhu, Y., Du, J., & Banerjee, R. (2010). Templated Growth of Hexagonal Nickel Carbide Nanocrystals on Vertically Aligned Carbon Nanotubes. JOURNAL OF PHYSICAL CHEMISTRY C, 114(23), 10424–10429. https://doi.org/10.1021/jp102571g

Wang, Y. B., Liao, X. Z., Zhao, Y. H., Lavernia, E. J., Ringer, S. P., Horita, Z., … Zhu, Y. T. (2010). The role of stacking faults and twin boundaries in grain refinement of a Cu-Zn alloy processed by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(18-19), 4959–4966. https://doi.org/10.1016/j.msea.2010.04.036

Cao, Y., Kawasaki, M., Wang, Y. B., Alhajeri, S. N., Liao, X. Z., Zheng, W. L., … Langdon, T. G. (2010, September). Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion. JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4545–4553. https://doi.org/10.1007/s10853-010-4485-5

Zhang, Y., Stan, L., Xu, P., Wang, H.-L., Doorn, S. K., Htoon, H., … Jia, Q. (2009). A double-layered carbon nanotube array with super-hydrophobicity. CARBON, 47(14), 3332–3336. https://doi.org/10.1016/j.carbon.2009.07.056

Zehetbauer, M. J., & Zhu, T. Y. (Eds.). (2009). Bulk nanostructured materials. Weinheim: Wiley-VCH.

WANG, Y. B., HO, J. C., CAO, Y., & al. (2009). Dislocation density evolution during high pressure torsion of a nanocrystalline Ni-Fe alloy. APPLIED PHYSICS LETTERS, 94(9). https://doi.org/10.1063/1.3095852

Wang, Y. B., Ho, J. C., Cao, Y., Liao, X. Z., Li, H. Q., Zhao, Y. H., … Zhu, Y. T. (2009). Dislocation density evolution during high pressure torsion of a nanocrystalline Ni-Fe alloy. Applied Physics Letters, 94(9).

ZHAO, Y. H., LIA, Y., TOPPING, T. D., LIAO, X. Z., ZHU, Y. D., VALIEV, R. Z., & LAVERNIA, E. J. (2009). Ductility of ultrafine-grained copper processed by equal-channel angular pressing. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100(12), 1647–1652. https://doi.org/10.3139/146.110232

Sun, P.-L., Zhao, Y. H., Cooley, J. C., Kassner, M. E., Horita, Z., Langdon, T. G., … Zhu, Y. T. (2009). Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 525(1-2), 83–86. https://doi.org/10.1016/j.msea.2009.06.030

Peng, H., Sun, X., Cai, F., Chen, X., Zhu, Y., Liao, G., … Jia, Q. (2009). Electrochromatic carbon nanotube/polydiacetylene nanocomposite fibres. NATURE NANOTECHNOLOGY, 4(11), 738–741. https://doi.org/10.1038/NNANO.2009.264

Zhu, Y. T., Narayan, J., Hirth, J. P., Mahajan, S., Wu, X. L., & Liao, X. Z. (2009). Formation of single and multiple deformation twins in nanocrystalline fcc metals. ACTA MATERIALIA, 57(13), 3763–3770. https://doi.org/10.1016/j.actamat.2009.04.020

WANG, Y. B., LIAO, X. Z., & ZHU, Y. T. (2009). Grain refinement and growth induced by severe plastic deformation. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100(12), 1632–1637. https://doi.org/10.3139/146.110230

Wang, Y. B., Liao, X. Z., & Zhu, Y. T. (2009). Grain refinement and growth induced by severe plastic deformation. International Journal of Materials Research, 100(12), 1632–1637.

Zhao, Y. H., Guo, Y. Z., Wei, Q., Topping, T. D., Dangelewicz, A. M., Zhu, Y. T., … Lavernia, E. J. (2009). Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 525(1-2), 68–77. https://doi.org/10.1016/j.msea.2009.06.031

Wang, Z. W., Wang, Y. B., Liao, X. Z., Zhao, Y. H., Lavernia, E. J., Zhu, Y. T., … Langdon, T. G. (2009). Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials. SCRIPTA MATERIALIA, 60(1), 52–55. https://doi.org/10.1016/j.scriptamat.2008.08.032

WANG, Y. B., HO, J. C., LIAO, X. Z., & al. (2009). Mechanism of grain growth during severe plastic deformation of a nanocrystalline Ni-Fe alloy. APPLIED PHYSICS LETTERS, 94(1). https://doi.org/10.1063/1.3065025

Wang, Y. B., Ho, J. C., Liao, X. Z., Li, H. Q., Ringer, S. P., & Zhu, Y. T. (2009). Mechanism of grain growth during severe plastic deformation of a nanocrystalline Ni-Fe alloy. Applied Physics Letters, 94(1).

Valiev, R. Z., Langdon, T. G., Alexandrov, I. V., Zhu, Y. T., Estrin, Y., & Kostorz, G. (2009). Preface. Materials Science and Engineering: A, 503(1-2), 1. https://doi.org/10.1016/j.msea.2008.11.027

Li, H., Misra, A., Zhu, Y., Horita, Z., Koch, C. C., & Holesinger, T. G. (2009). Processing and characterization of nanostructured Cu-carbon nanotube composites. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 523(1-2), 60–64. https://doi.org/10.1016/j.msea.2009.05.031

BEYERLEIN, I. J., PORWAL, P. K., Zhu, Y. T., HU, K., & XU, X. F. (2009). Scale and twist effects on the strength of nanostructured yarns and reinforced composites. NANOTECHNOLOGY, 20(48). https://doi.org/10.1088/0957-4484/20/48/485702

Valiev, R. Z., Langdon, T. G., Alexandrov, I. V., Zhu, Y. T., Estrin, Y., & Kostorz, G. (2009). Special Issue International Symposium on Bulk Nanostructured Materials: From Fundamentals to Innovation, BNM 2007 held at Ufa, Russia August 14-18, 2007 Preface. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 503(1-2), 1–1.

Wu, X. L., Zhu, Y. T., Wei, Y. G., & Wei, Q. (2009). Strong Strain Hardening in Nanocrystalline Nickel. PHYSICAL REVIEW LETTERS, 103(20). https://doi.org/10.1103/physrevlett.103.205504

Li, H., Misra, A., Horita, Z., Koch, C. C., Mara, N. A., Dickerson, P. O., & Zhu, Y. (2009). Strong and ductile nanostructured Cu-carbon nanotube composite. APPLIED PHYSICS LETTERS, 95(7). https://doi.org/10.1063/1.3211921

Zhang, Y., Zou, G., Doorn, S. K., Htoon, H., Stan, L., Hawley, M. E., … Jia, Q. (2009). Tailoring the Morphology of Carbon Nanotube Arrays: From Spinnable Forests to Undulating Foams. ACS NANO, 3(8), 2157–2162. https://doi.org/10.1021/nn9003988

Zhu, Y. T., Wu, X. L., Liao, X. Z., Narayan, J., Mathaudhu, S. N., & Kecskés, L. J. (2009). Twinning partial multiplication at grain boundary in nanocrystalline fcc metals. Applied Physics Letters, 95(3), 031909. https://doi.org/10.1063/1.3187539

Peng, H., Jain, M., Peterson, D. E., Zhu, Y., & Jia, Q. (2008). Composite Carbon Nanotube/Silica Fibers with Improved Mechanical Strengths and Electrical Conductivities. SMALL, 4(11), 1964–1967. https://doi.org/10.1002/smll.200800231

Wu, X. L., Narayan, J., & Zhu, Y. T. (2008). Deformation twin formed by self-thickening, cross-slip mechanism in nanocrystalline Ni. Applied Physics Letters, 93(3), 031910. https://doi.org/10.1063/1.2949685

Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2008). Deformation twinning in bulk nanocrystalline metals: Experimental observations. JOM, 60(9), 60–64. https://doi.org/10.1007/s11837-008-0120-1

ZHAO, Y. H., LIAO, X. Z., HORITA, Z., & al. (2008). Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu-Zn alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 493(1-2), 123–129. https://doi.org/10.1016/j.msea.2007.11.074

Zhao, Y. H., Liao, X. Z., Horita, Z., Langdon, T. G., & Zhu, Y. T. (2008). Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu-Zn alloys. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 493(1-2), 123–129.

ZHAO, Y. H., HORITA, Z., LANGDON, T. G., & al. (2008). Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu-Zn alloys: Influence of stacking fault energy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 474(1-2), 342–347. https://doi.org/10.1016/j.msea.2007.06.014

CHENG, S., CHOO, H., ZHAO, Y. H., & al. (2008). High ductility of ultrafine-grained steel via phase transformation. JOURNAL OF MATERIALS RESEARCH, 23(6), 1578–1586. https://doi.org/10.1557/JMR.2008.0213

Zhao, Y. H., Topping, T., Bingert, J. F., Thornton, J. J., Dangelewicz, A. M., Li, Y., … al. (2008). High tensile ductility and strength in bulk nanostructured nickel. ADVANCED MATERIALS, 20(16), 3028–3033. https://doi.org/10.1002/adma.200800214

ZHAO, Y. H., TOPPING, T., BINGERT, J. F., & al. (2008). High tensile ductility and strength in bulk nanostructured nickel. ADVANCED MATERIALS, 20(16), 3028–3033.

Zhao, Y. H., Guo, Y. Z., Wei, Q., Dangelewiez, A. M., Zhu, Y. T., Langdon, T. G., … Xu, C. (2008). Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu. SCRIPTA MATERIALIA, 59(6), 627–630. https://doi.org/10.1016/j.scriptamat.2008.05.031

BALOGH, L., UNGAR, T., ZHAO, Y., & al. (2008). Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys. ACTA MATERIALIA, 56(4), 809–820. https://doi.org/10.1016/j.actamat.2007.10.053

Wu, X. L., & Zhu, Y. T. (2008). Inverse grain-size effect on twinning in nanocrystalline Ni. PHYSICAL REVIEW LETTERS, 101(2). https://doi.org/10.1103/physrevlett.101.025503

Raaba, G. I., Valiev, R. Z., Gunderov, D. V., Lowe, T. C., Misra, A., & Zhu, Y. T. (2008). Long-length ultrafine-grained titanium rods produced by ECAP-Conform. In Nanomaterials By Severe Plastic Deformation Iv, Pts 1 and 2 (Vol. 584-586, pp. 80–85).

Zhang, X., Kostorz, G., Liu, C. T., Rigsbee, M., Suryanarayana, C., Wang, H., … Zhang, D. (2008, October 15). Mechanical Behavior of Nanostructured Materials, in Honor of Carl Koch held at TMS 2007, Orlando, Florida Preface. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 1–2. https://doi.org/10.1016/j.msea.2008.01.019

PENG, H. S., ZHU, Y. T., PETERSON, D. E., & al. (2008). Nanolayeired carbon/silica superstructures via organosilane assembly. ADVANCED MATERIALS, 20(6), 1199-+. https://doi.org/10.1002/adma.200701303

Valiev, R., Gunderov, D., Prokofiev, E., Pushin, V., & Zhu, Y. (2008). Nanostructuring of TiNi alloy by SPD processing for advanced properties. MATERIALS TRANSACTIONS, 49(1), 97–101. https://doi.org/10.2320/matertrans.ME200722

WU, X. L., LIAO, X. Z., SRINIVASAN, S. G., & al. (2008). New deformation twinning mechanism generates zero macroscopic strain in nanocrystalline metals. PHYSICAL REVIEW LETTERS, 1(9). https://doi.org/10.1103/PhysRevLett.100.095701

Wu, X. L., Liao, X. Z., Srinivasan, S. G., Zhou, F., Lavernia, E. J., Valiev, R. Z., & Zhu, Y. T. (2008). New deformation twinning mechanism generates zero macroscopic strain in nanocrystalline metals. Physical Review Letters, 1(9).

Zhu, Y., Estrin, Y., Langdon, T. G., Liao, X., Lowe, T. C., Shan, Z., & Valiev, R. Z. (2008). Preface. Journal of Materials Science, 43(23-24), 7255–7256. https://doi.org/10.1007/s10853-008-2991-5

Narayan, J., & Zhu, Y. T. (2008). Self-thickening, cross-slip deformation twinning model. Applied Physics Letters, 92(15), 151908. https://doi.org/10.1063/1.2911735

Narayan, J., & Zhu, Y. T. (2008). Self-thickening, cross-slip deformation twinning model. Applied Physics Letters, 92(15).

Zhu, Y. T., Estrin, Y., Langdon, T. G., Liao, X. Z., Lowe, T. C., Shan, Z. W., & Valiev, R. Z. (2008). Special issue: Ultrafine-grained materials preface. Journal of Materials Science, 43(23-24), 7255–7256.

Peng, H., Chen, D., Huang, J.-Y., Chikkannanavar, S. B., Haenisch, J., Jain, M., … Jia, Q. X. (2008). Strong and ductile colossal carbon tubes with walls of rectangular macropores. PHYSICAL REVIEW LETTERS, 101(14). https://doi.org/10.1103/physrevlett.101.145501

ZHAO, Y. H., BINGERT, J. F., ZHU, Y. T., & al. (2008). Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density. APPLIED PHYSICS LETTERS, 92(8). https://doi.org/10.1063/1.2870014

Peng, H., Jain, M., Li, Q., Peterson, D. E., Zhu, Y., & Jia, Q. (2008). Vertically aligned pearl-like carbon nanotube arrays for fiber spinning. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 130(4), 1130-+. https://doi.org/10.1021/ja077767c

WANG, Y. M., HUANG, J. Y., JIAO, T., & al. (2007). Abnormal strain hardening in nanostructured titanium at high strain rates and large strains. JOURNAL OF MATERIALS SCIENCE, 42(5), 1751–1756.

ZHENG, L. X., ZHANG, X. F., LI, Q. W., & al. (2007). Carbon-nanotube cotton for large-scale fibers. ADVANCED MATERIALS, 19(18), 2567-+. https://doi.org/10.1002/adma.200602648

Wu, X., Ma, E., & Zhu, Y. T. (2007). Deformation defects in nanocrystalline nickel. Journal of Materials Science, 42(5), 1427–1432. https://doi.org/10.1007/S10853-006-1229-7

USOV, I. O., WANG, Y. Q., LI, Q., & al. (2007). Impurity elements study of carbon nanotubes fabricated by chemical vapor deposition. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 261(1-2), 574–577. https://doi.org/10.1016/j.nimb.2007.04.173

ZHAO, Y. H., ZHU, Y. T., LIAO, X. Z., & al. (2007). Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 463(1-2), 22–26. https://doi.org/10.1016/j.msea.2006.08.119

Wang, Z. L., Tang, D. W., Li, X. B., Zheng, X. H., Zhang, W. G., Zheng, L. X., … Gu, C. Z. (2007). Length-dependent thermal conductivity of an individual single-wall carbon nanotube. Applied Physics Letters, 91(12), 123119. https://doi.org/10.1063/1.2779850

WANG, Z. L., TANG, D. W., LI, X. B., & al. (2007). Length-dependent thermal conductivity of an individual single-wall carbon nanotube. APPLIED PHYSICS LETTERS, 91.

WANG, Z. L., TANG, D. W., ZHENG, X. H., & al. (2007). Length-dependent thermal conductivity of single-wall carbon nanotubes: prediction and measurements. NANOTECHNOLOGY, 18(47). https://doi.org/10.1088/0957-4484/18/47/475714

Zhang, X., Zhu, Y., Rigsbee, M., Suryanarayana, C., Wang, H., & Liu, C. T. (2007, September). Mechanical Behavior of nanostructured materials symposium honoring Carl Koch. JOM, Vol. 59, pp. 49–49. https://doi.org/10.1007/s11837-007-0116-2

CHENG, S., ZHAO, Y. H., ZHU, Y. T., & al. (2007). Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation. ACTA MATERIALIA, 55(17), 5822–5832. https://doi.org/10.1016/j.actamat.2007.06.043

WU, X. L., QI, Y., & ZHU, Y. T. (2007). Partial-mediated slips in nanocrystalline Ni at high strain rate. APPLIED PHYSICS LETTERS, 90(22). https://doi.org/10.1063/1.2745250

Zhu, Y. T., Wang, Z. L., & Langdon, T. G. (2007). Preface. Journal of Materials Science, 42(5), 1401–1402. https://doi.org/10.1007/S10853-006-1292-0

Zhang, X., Li, Q., Tu, Y., Li, Y., Coulter, J. Y., Zheng, L., … Zhu, Y. (2007). Strong Carbon-Nanotube Fibers Spun from Long Carbon-Nanotube Arrays. Small, 3(2), 244–248. https://doi.org/10.1002/smll.200600368

ZHANG, X. F., LI, Q. W., TU, Y., & al. (2007). Strong carbon-nanotube fibers spun from long carbon-nanotube arrays. SMALL, 3(2), 244–248.

LI, Q. W., LI, Y., ZHANG, X. F., & al. (2007). Structure-dependent electrical properties of carbon nanotube fibers. ADVANCED MATERIALS, 19(20), 3358-+. https://doi.org/10.1002/adma.200602966

YAO, Y. G., LI, Q. W., ZHANG, J., & al. (2007). Temperature-mediated growth of single-walled carbon-nanotube intramolecular junctions. NATURE MATERIALS, 6(4), 283–286. https://doi.org/10.1038/nmat1865

Zhang, X., Li, Q., Holesinger, T. G., Arendt, P. N., Huang, J., Kirven, P. D., … Zhu, Y. (2007). Ultrastrong, stiff, and lightweight carbon-nanotube fibers. ADVANCED MATERIALS, 19(23), 4198-+. https://doi.org/10.1002/adma.200700776

Ungár, T., Balogh, L., Zhu, Y. T., Horita, Z., Xu, C., & Langdon, T. G. (2007). Using X-ray microdiffraction to determine grain sizes at selected positions in disks processed by high-pressure torsion. Materials Science and Engineering: A, 444(1-2), 153–156. https://doi.org/10.1016/j.msea.2006.08.059

UNGAR, T., BALOGH, L., ZHU, Y. T. T., & al. (2007). Using X-ray microdiffraction to determine grain sizes at selected positions in disks processed by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 444(1-2), 153–156.

Wang, Y. M., Huang, J. Y., Jiao, T., Zhu, Y. T., & Hamza, A. V. (2006). Abnormal strain hardening in nanostructured titanium at high strain rates and large strains. Journal of Materials Science, 42(5), 1751–1756. https://doi.org/10.1007/S10853-006-0822-0

Zhu, Y. T. (2006). Deformation Twinning in Nanocrystalline fcc Copper and Aluminum. In Y. T. Zhu & V. Varyukhin (Eds.), Nanostructured Materials by High-Pressure Severe Plastic Deformation (pp. 3–11). https://doi.org/10.1007/1-4020-3923-9_1

ZHU, Y. T. (2006). Deformation twins formed in nanocrystalline materials. NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 503-504, 125–132.

LI, Q. W., DEPAULA, R., ZHANG, X. F., & al. (2006). Drying induced upright sliding and reorganization of carbon nanotube arrays. NANOTECHNOLOGY, 17(18), 4533–4536. https://doi.org/10.1088/0957-4484/17/18/001

PUSHIN, V. G., VALIEV, R. Z., ZHU, Y. T., & al. (2006). Effect of equal channel angular pressing and repeated rolling on structure, phase transformations and properties of TiNi shape memory alloys. NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 503-504, 539–544.

PUSHIN, V. G., VALIEV, R. Z., ZHU, Y. T., & al. (2006). Effect of severe plastic deformation on the behavior of Ti-Ni shape memory alloys. MATERIALS TRANSACTIONS, 47(3), 694–697.

HAN, B. Q., HUANG, J. Y., ZHU, Y. T., & al. (2006). Effect of strain rate on the ductility of a nanostructured aluminum alloy. SCRIPTA MATERIALIA, 54(6), 1175–1180. https://doi.org/10.1016/j.scriptamat.2005.11.035

Stolyarov, V. V., Valiev, R. Z., & Zhu, Y. T. (2006). Enhanced low-temperature impact toughness of nanostructured Ti. Applied Physics Letters, 88(4), 041905. https://doi.org/10.1063/1.2167800

Liao, X. Z., Kilmametov, A. R., Valiev, R. Z., Gao, H., Li, X., Mukherjee, A. K., … Zhu, Y. T. (2006). High-pressure torsion-induced grain growth in electrodeposited nanocrystalline Ni. Applied Physics Letters, 88(2), 021909. https://doi.org/10.1063/1.2159088

LIAO, X. Z., KILMAMETOV, A. R., VALIEV, R. Z., & al. (2006). High-pressure torsion-induced grain growth in electrodeposited nanocrystalline Ni. APPLIED PHYSICS LETTERS, 88(2).

Saitova, L. R., Semenova, I. P., Raab, G. I., Valiev, R. Z., Lowe, T. C., & Zhu, Y. T. (2006). Improving the Mechanical Properties of Ti-6Al-4V Alloy by Equal Channel Angular Pressing. In Y. T. Zhu & V. Varyukhin (Eds.), Nanostructured Materials by High-Pressure Severe Plastic Deformation (pp. 241–246). https://doi.org/10.1007/1-4020-3923-9_33

SEMENOVA, I. P., SAITOVA, L. R., RAAB, G. I., & al. (2006). Microstructural features and mechanical properties of the Ti-6Al-4V ELI alloy processed by severe plastic deformation. NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 503-504, 757–762.

Semenova, I. P., Latysh, V. V., Zhu, Y. T., Lowe, T. C., Valiev, R. Z., & Sadikova, G. H. (2006). Microstructure and Mechanical Properties of Long, Ultrafine-Grained Ti Rods. In Y. T. Zhu & V. Varyukhin (Eds.), Nanostructured Materials by High-Pressure Severe Plastic Deformation (pp. 235–240). https://doi.org/10.1007/1-4020-3923-9_32

LATYSH, VV, SEMENOVA, I. P., SALIMGAREEVA, G. H., & al. (2006). Microstructure and properties of Ti rods produced by multi-step SPD. NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 503-504, 763–768.

Zhu, Y. T. (2006). Nanostructured materials: From laboratory to commercialization. JOM, 58(4), 27–27. https://doi.org/10.1007/S11837-006-0211-9

HAN, B. Q., HUANG, J. Y., ZHU, Y. T., & al. (2006). Negative strain-rate sensitivity in a nanostructured aluminum alloy. ADVANCED ENGINEERING MATERIALS, 8(10), 945–947. https://doi.org/10.1002/adem.200600164

ZHENG, L. X., LIAO, X. Z., & ZHU, Y. T. (2006). Parametnic study of carbon nanotube growth via cobalt-catalyzed ethanol decomposition. MATERIALS LETTERS, 60(16), 1968–1972. https://doi.org/10.1016/j.matlet.2005.12.060

WU, X. L., & ZHU, Y. T. (2006). Partial-dislocation-mediated processes in nanocrystalline Ni with nonequilibrium grain boundaries. APPLIED PHYSICS LETTERS, 89(3). https://doi.org/10.1063/1.2227639

WU, X. L., ZHU, Y. T., & MA, E. (2006). Predictions for partial-dislocation-mediated processes in nanocrystalline Ni by generalized planar fault energy curves: An experimental evaluation. APPLIED PHYSICS LETTERS, 88(12). https://doi.org/10.1063/1.2186968

Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zechetbauer, M. J., & Zhu, Y. T. (2006). Producing bulk ultrafine-grained materials by severe plastic deformation. JOM, 58(4), 33–39. https://doi.org/10.1007/S11837-006-0213-7

VALIEV, R. Z., ESTRIN, Y., HORITA, Z., & al. (2006). Producing bulk ultrafine-grained materials by severe plastic deformation. JOM, 58(4), 33–39.

LI, Q. W., ZHU, Y. T., KINLOCH, I. A., & al. (2006). Self-organization of carbon nanotubes in evaporating droplets. JOURNAL OF PHYSICAL CHEMISTRY B, 110(28), 13926–13930. https://doi.org/10.1021/jp061554c

PUSHIN, V. G., VALIEV, R. Z., ZHU, Y. T., & al. (2006). Severe plastic deformation of melt-spun shape memory Ti2NiCu and Ni2MnGa alloys. MATERIALS TRANSACTIONS, 47(3), 546–549.

ZHAO, Y. H., LIAO, X. Z., CHENG, S., & al. (2006). Simultaneously increasing the ductility and strength of nanostructured alloys. ADVANCED MATERIALS, 18(17), 2280-+. https://doi.org/10.1002/adma.200600310

ZHAO, Y. H., BINGERT, J. E., LIAO, X. Z., & al. (2006). Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper. ADVANCED MATERIALS, 18(22), 2949-+. https://doi.org/10.1002/adma.200601472

HAN, B. Q., HUANG, J. Y., ZHU, Y. T., & al. (2006). Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys. ACTA MATERIALIA, 54(11), 3015–3024. https://doi.org/10.1016/j.actamat.2006.02.045

Stolyarov, V. V., Prokofiev, E. A., Valiev, R. Z., Lowe, T. C., & Zhu, Y. T. (2006). Structure and Properties of Ti Alloys Processed by ECAP. In Y. T. Zhu & V. Varyukhin (Eds.), Nanostructured Materials by High-Pressure Severe Plastic Deformation (pp. 169–174). https://doi.org/10.1007/1-4020-3923-9_23

LI, Q. W., ZHANG, X. F., DEPAULA, R. F., & al. (2006). Sustained growth of ultralong carbon nanotube arrays for fiber spinning. ADVANCED MATERIALS, 18(23), 3160-+. https://doi.org/10.1002/adma.200601344

ZHAO, Y. H., ZHU, Y. T., LIAO, X. Z., & al. (2006). Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy. APPLIED PHYSICS LETTERS, 89(12). https://doi.org/10.1063/1.2356310

Wu, X., Zhu, Y. T., Chen, M. W., & Ma, E. (2006). Twinning and stacking fault formation during tensile deformation of nanocrystalline Ni. Scripta Materialia, 54(9), 1685–1690. https://doi.org/10.1016/j.scriptamat.2005.12.045

WU, X., ZHU, Y. T., CHEN, M. W., & al. (2006). Twinning and stacking fault formation during tensile deformation of nanocrystalline Ni. SCRIPTA MATERIALIA, 54(9), 1685–1690.

Zhu, Y. T. (2005). Book Review: Plastic Deformation in Nanocrystalline Materials. By M. Yu. Gutkin and I. A. Ovid'ko. [Review of Plastic Deformation in Nanocrystalline Materials, by M. Y. Gutkin & I. A. Ovid'ko]. Advanced Materials, 17(20), 2513–2514. https://doi.org/10.1002/adma.200590101

SRINIVASAN, S. G., LIAO, X. Z., BASKES, M. I., & al. (2005). Compact and dissociated dislocations in aluminum: Implications for deformation. PHYSICAL REVIEW LETTERS, 94(12).

Valiev, R. Z., & Zhu, Y. T. (2005). Contribution of early works by Terence G. Langdon to modern materials science. Materials Science and Engineering: A, 410-411, 5–7. https://doi.org/10.1016/j.msea.2005.08.105

ZHU, Y. T. (2005). Deformation twinning in nanocrystalline metals. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 14(4), 467–472.

Liao, X. Z., MacManus-Driscoll, J. L., Zhu, Y. T., Peterson, D. E., & Xu, H. F. (2005). Disordered Phases in Magnetoresistance Sr2FeMoO6 Induced by Cation Deficiency. Microscopy and Microanalysis, 11(S02). https://doi.org/10.1017/S1431927605503593

La, P. Q., Ma, J. Q., Zhu, Y. T., Yang, J., Liu, W. M., Xue, Q. J., & Valiev, R. Z. (2005). Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation. Acta Materialia, 53(19), 5167–5173. https://doi.org/10.1016/j.actamat.2005.07.031

LA, P. Q., MA, J. Q., ZHU, Y. T., & al. (2005). Dry-sliding tribological properties of ultrafine-grained Ti prepared by severe plastic deformation. ACTA MATERIALIA, 53(19), 5167–5173.

WANG, H., LIAO, X. Z., XU, H. F., & al. (2005). Effects of Eu interfacial mobility on the growth of epitaxial EuBa2Cu3O7-delta films. APPLIED PHYSICS LETTERS, 86(10). https://doi.org/10.1063/1.1881779

ZHAO, Y. H., LIAO, X. Z., ZHU, Y. T., & al. (2005). Enhanced mechanical properties in ultrafine grained 7075 Al alloy. JOURNAL OF MATERIALS RESEARCH, 20(2), 288–291.

Zhu, Y. T., Liao, X. Z., & Valiev, R. Z. (2005). Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals. Applied Physics Letters, 86(10), 103112. https://doi.org/10.1063/1.1879111

ZHU, Y. T., & LIAO, X. Z. (2005). Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals. APPLIED PHYSICS LETTERS, 86(10).

Xue, Q., Liao, X. Z., Zhu, Y. T., & Gray, G. T., III. (2005). Formation mechanisms of nanostructures in stainless steel during high-strain-rate severe plastic deformation. Materials Science and Engineering: A, 410-411, 252–256. https://doi.org/10.1016/j.msea.2005.08.022

XUE, Q., LIAO, X. Z., ZHU, Y. T., & al. (2005). Formation mechanisms of nanostructures in stainless steel during high-strain-rate severe plastic deformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 410, 252–256.

Zhu, Y. T., & Langdon, T. G. (2005). Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials. Materials Science and Engineering: A, 409(1-2), 234–242. https://doi.org/10.1016/j.msea.2005.05.111

ZHAO, Y. H., LIAO, X. Z., ZHU, Y. T., & al. (2005). Influence of stacking fault energy on nanostructure formation under high pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 410, 188–193. https://doi.org/10.1016/j.msea.2005.08.074

Pushin, V. G., Stolyarov, V. V., Valiev, R. Z., Lowe, T. C., & Zhu, Y. T. (2005). Nanostructured TiNi-based shape memory alloys processed by severe plastic deformation. Materials Science and Engineering: A, 410-411, 386–389. https://doi.org/10.1016/j.msea.2005.08.071

PUSHIN, V. G., STOLYAROV, VV, VALIEV, R. Z., & al. (2005). Nanostructured TiNi-based shape memory alloys processed by severe plastic deformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 410, 386–389.

Zhu, Y. T., Liao, X. Z., Srinivasan, S. G., & Lavernia, E. J. (2005). Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation. Journal of Applied Physics, 98(3), 034319. https://doi.org/10.1063/1.2006974

ZHU, Y. T., LIAO, X. Z., SRINIVASAN, S. G., & al. (2005). Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation. JOURNAL OF APPLIED PHYSICS, 98(3).

DOORN, S. K., O’CONNELL, M. J., ZHENG, L. X., & al. (2005). Raman spectral imaging of a carbon nanotube intramolecular junction. PHYSICAL REVIEW LETTERS, 94(1).

DOORN, S. K., ZHENG, L. X., O’CONNELL, M. J., & al. (2005). Raman spectroscopy and imaging of ultralong carbon nanotubes. JOURNAL OF PHYSICAL CHEMISTRY B, 109(9), 3751–3758. https://doi.org/10.1021/jp0463159

Zhu, Y. T., Horita, Z., Xia, K., Berbon, P. B., Raj, S. V., Chokshi, A. H., & Kostorz, G. (2005). The Langdon Symposium: Flow and Forming of Crystalline Materials. Materials Science and Engineering: A, 410-411, 1–2. https://doi.org/10.1016/j.msea.2005.08.106

WANG, Z. W., ZHAO, Y. S., TAIT, K., & al. (2004). A quenchable superhard carbon phase synthesized by cold compression of carbon nanotubes. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 101(38), 13699–13702.

Huang, J. Y., Zhu, Y. T., Liao, X. Z., & Valiev, R. Z. (2004). Amorphization of TiNi induced by high-pressure torsion. Philosophical Magazine Letters, 84(3), 183–190. https://doi.org/10.1080/09500830310001657353

HUANG, J. Y., ZHU, Y. T., LIAO, X. Z., & al. (2004). Amorphization of TiNi induced by high-pressure torsion. PHILOSOPHICAL MAGAZINE LETTERS, 84(3), 183–190.

RAAB, G. J., VALIEV, R. Z., LOWE, T. C., & al. (2004). Continuous processing of ultrafine grained Al by ECAP-Conform. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 382(1-2), 30–34.

Raab, G. J., Valiev, R. Z., Lowe, T. C., & Zhu, Y. T. (2004). Continuous processing of ultrafine grained Al by ECAP–Conform. Materials Science and Engineering: A, 382(1-2), 30–34. https://doi.org/10.1016/j.msea.2004.04.021

BALYANOV, A., KUTNYAKOVA, J., AMIRKHANOVA, N. A., & al. (2004). Corrosion resistance of ultra fine-grained Ti. SCRIPTA MATERIALIA, 51(3), 225–229.

Liao, X. Z., Zhao, Y. H., Srinivasan, S. G., Zhu, Y. T., Valiev, R. Z., & Gunderov, D. V. (2004). Deformation twinning in nanocrystalline copper at room temperature and low strain rate. Applied Physics Letters, 84(4), 592–594. https://doi.org/10.1063/1.1644051

LIAO, X. Z., ZHAO, Y. H., SRINIVASAN, S. G., & al. (2004). Deformation twinning in nanocrystalline copper at room temperature and low strain rate. APPLIED PHYSICS LETTERS, 84(4), 592–594.

Huang, J., Zhu, Y. T., Alexander, D. J., Liao, X., Lowe, T. C., & Asaro, R. J. (2004). Development of repetitive corrugation and straightening. Materials Science and Engineering: A, 371(1-2), 35–39. https://doi.org/10.1016/S0921-5093(03)00114-X

HUANG, J. Y., ZHU, Y. T., ALEXANDER, D. J., & al. (2004). Development of repetitive corrugation and straightening. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 371(1-2), 35–39.

Stolyarov, V., Zhu, Y., Raab, G., Zharikov, A., & Valiev, R. (2004). Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling. Materials Science and Engineering A, 385(1-2), 309–313. https://doi.org/10.1016/j.msea.2004.06.054

Stolyarov, V., Zhu, Y., Raab, G., Zharikov, A., & Valiev, R. (2004). Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling. Materials Science and Engineering A, 385(1-2), 309–313. https://doi.org/10.1016/S0921-5093(04)00881-0

STOLYAROV, VV, ZHU, Y. T., RAAB, G. I., & al. (2004). Effect of initial microstructure on the microstructural evolution and mechanical properties of Ti during cold rolling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 385(1-2), 309–313.

Berenov, A., Serquis, A., Liao, X. Z., Zhu, Y. T., Peterson, D. E., Bugoslavsky, Y., … MacManus-Driscoll, J. L. (2004). Enhancement of critical current density in low level Al-doped MgB2. Superconductor Science and Technology, 17(10), 1093–1096. https://doi.org/10.1088/0953-2048/17/10/001

BERENOV, A., SERQUIS, A., LIAO, X. Z., & al. (2004). Enhancement of critical current density in low level Al-doped MgB2. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 17(10), 1093–1096.

LIAO, X. Z., SRINIVASAN, S. G., ZHAO, Y. H., & al. (2004). Formation mechanism of wide stacking faults in nanocrystalline Al. APPLIED PHYSICS LETTERS, 84(18), 3564–3566. https://doi.org/10.1063/1.1734689

ZHU, Y. T., EGELAND, G. W., LI, Y., & al. (2004). Formation of pile networks by long carbon nanotubes from decomposition of CO on Co-Mo film. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 4(1-2), 189–191.

Liao, X. Z., Zhao, Y. H., Zhu, Y. T., Valiev, R. Z., & Gunderov, D. V. (2004). Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion. Journal of Applied Physics, 96(1), 636–640. https://doi.org/10.1063/1.1757035

LIAO, X. Z., ZHAO, Y. H., ZHU, Y. T., & al. (2004). Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion. JOURNAL OF APPLIED PHYSICS, 96(1), 636–640.

Liao, X. Z., Sharma, A., Wei, M., MacManus-Driscoll, J. L., Branford, W., Cohen, L. F., … Xu, H. F. (2004). Highly disordered intergrowths in Sr2 Fe Mo O6. Journal of Applied Physics, 96(12), 7747–7749. https://doi.org/10.1063/1.1812585

LIAO, X. Z., SHARMA, A., WEI, M., & al. (2004). Highly disordered intergrowths in Sr2FeMoO6. JOURNAL OF APPLIED PHYSICS, 96(12), 7747–7749.

Stan, M., Zhu, Y. T., Jiang, H., & Butt, D. P. (2004). Kinetics of oxygen removal from ceria. Journal of Applied Physics, 95(7), 3358–3361. https://doi.org/10.1063/1.1650890

STAN, M., ZHU, Y. T., JIANG, H., & al. (2004). Kinetics of oxygen removal from ceria. JOURNAL OF APPLIED PHYSICS, 95(7), 3358–3361.

SERQUIS, A., CIVALE, L., COULTER, J. Y., & al. (2004). Large field generation with a hot isostatically pressed powder-in-tube MgB2 coil at 25 K. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 17(10), L35–L37. https://doi.org/PII S0953-2048(04)78622-4

Serquis, A., Civale, L., Coulter, J. Y., Hammon, D. L., Liao, X. Z., Zhu, Y. T., … Indrakanti, S. S. (2004). Large field generation with a hot isostatically pressed powder-in-tube MgB2 coil at 25 K. Superconductor Science and Technology, 17(10), L35–L37. https://doi.org/10.1088/0953-2048/17/10/L01

Zhao, Y. H., Zhu, Y. T., & Liu, T. (2004). Mechanism of solid-state amorphization of Se induced by mechanical milling. Journal of Applied Physics, 95(12), 7674–7680. https://doi.org/10.1063/1.1737478

Zhao, Y. H., Liao, X. Z., Jin, Z., Valiev, R. Z., & Zhu, Y. T. (2004). Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing. Acta Materialia, 52(15), 4589–4599. https://doi.org/10.1016/j.actamat.2004.06.017

ZHAO, Y. H., LIAO, X. Z., JIN, Z., & al. (2004). Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing. ACTA MATERIALIA, 52(15), 4589–4599.

ZHU, Y. T., & LIAO, X. Z. (2004). Nanostructured metals - Retaining ductility. NATURE MATERIALS, 3(6), 351–352.

Zhu, Y. T., Liao, X. Z., Srinivasan, S. G., Zhao, Y. H., Baskes, M. I., Zhou, F., & Lavernia, E. J. (2004). Nucleation and growth of deformation twins in nanocrystalline aluminum. Applied Physics Letters, 85(21), 5049–5051. https://doi.org/10.1063/1.1823042

ZHU, Y. T., LIAO, X. Z., SRINIVASAN, S. G., & al. (2004). Nucleation and growth of deformation twins in nanocrystalline aluminum. APPLIED PHYSICS LETTERS, 85(21), 5049–5051.

Zhu, Y. T., Lowe, T. C., & Langdon, T. G. (2004). Performance and applications of nanostructured materials produced by severe plastic deformation. Scripta Materialia, 51(8), 825–830. https://doi.org/10.1016/j.scriptamat.2004.05.006

Liao, X. Z., Zhu, Y. T., Qiu, Y. M., Uhl, D., & Xu, H. F. (2004). Quantum dot/substrate interaction in InAs/In0.53 Ga0.47 As/InP(001). Applied Physics Letters, 84(4), 511–513. https://doi.org/10.1063/1.1642754

LIAO, X. Z., ZHU, Y. T., QIU, Y. M., & al. (2004). Quantum dot/substrate interaction in InAs/In0.53Ga0.47As/InP(001). APPLIED PHYSICS LETTERS, 84(4), 511–513.

Stolyarov, V. V., Shuster, L. S., Migranov, M. S., Valiev, R. Z., & Zhu, Y. T. (2004). Reduction of friction coefficient of ultrafine-grained CP titanium. Materials Science and Engineering: A, 371(1-2), 313–317. https://doi.org/10.1016/j.msea.2003.12.026

STOLYAROV, VV, SHUSTER, L. S., MIGRANOV, M. S., & al. (2004). Reduction of friction coefficient of ultrafine-grained CP titanium. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 371(1-2), 313–317.

Zhu, Y. T., & Liao, X. (2004). Retaining ductility. Nature Materials, 3(6), 351–352. https://doi.org/10.1038/nmat1141

Liao, X. Z., Serquis, A., Zhu, Y. T., Peterson, D. E., Mueller, F. M., & Xu, H. F. (2004). Strain effect on the critical superconducting temperature of MgB2. Superconductor Science and Technology, 17(8), 1026–1030. https://doi.org/10.1088/0953-2048/17/8/014

LIAO, X. Z., SERQUIS, A., ZHU, Y. T., & al. (2004). Strain effect on the critical superconducting temperature of MgB2. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 17(8), 1026–1030.

Zhu, Y. T., & Langdon, T. G. (2004). The fundamentals of nanostructured materials processed by severe plastic deformation. JOM, 56(10), 58–63. https://doi.org/10.1007/S11837-004-0294-0

Wang, Y. M., Ma, E., Valiev, R. Z., & Zhu, Y. T. (2004). Tough Nanostructured Metals at Cryogenic Temperatures. Advanced Materials, 16(4), 328–331. https://doi.org/10.1002/adma.200305679

WANG, Y. M., MA, E., VALIEV, R. Z., & al. (2004). Tough nanostructured metals at cryogenic temperatures. ADVANCED MATERIALS, 16(4), 328-+.

Zheng, L. X., O'Connell, M. J., Doorn, S. K., Liao, X. Z., Zhao, Y. H., Akhadov, E. A., … Zhu, Y. T. (2004). Ultralong single-wall carbon nanotubes. Nature Materials, 3(10), 673–676. https://doi.org/10.1038/nmat1216

ZHENG, L. X., O’CONNELL, M. J., DOORN, S. K., & al. (2004). Ultralong single-wall carbon nanotubes. NATURE MATERIALS, 3(10), 673–676.

GUBICZA, J., DRAGOMIR, L. C., RIBARIK, G., & al. (2003). Characterization of the microstructure of severely deformed titanium by X-ray diffraction profile analysis. MATERIALS SCIENCE, TESTING AND INFORMATICS, 414-4, 229–234.

SERQUIS, A., LIAO, X. Z., HUANG, J. Y., & al. (2003). Co-Mo catalyzed growth of multi-wall carbon nanotubes from CO decomposition. CARBON, 41(13), 2635–2641.

LOWE, T. C., & ZHU, Y. T. (2003). Commercialization of nanostructured metals produced by severe plastic deformation processing. ADVANCED ENGINEERING MATERIALS, 5(5), 373–378.

LIAO, X. Z., SERQUIS, A., ZHU, Y. T., & al. (2003). Defect structures in MgB2 wires introduced by hot isostatic pressing. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 16(7), 799–803.

LIAO, X. Z., ZHOU, F., LAVERNIA, E. J., & al. (2003). Deformation mechanism in nanocrystalline Al: Partial dislocation slip. APPLIED PHYSICS LETTERS, 83(4), 632–634.

LIAO, X. Z., ZHOU, F., LAVERNIA, E. J., & al. (2003). Deformation twins in nanocrystalline Al. APPLIED PHYSICS LETTERS, 83(24), 5062–5064.

KIM, I., KIM, J., SHIN, D. H., & al. (2003). Deformation twins in pure titanium processed by equal channel angular pressing. SCRIPTA MATERIALIA, 48(6), 813–817.

GUBICZA, J., DRAGOMIR, I. C., RIBARIK, G., & al. (2003). Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis. ZEITSCHRIFT FUR METALLKUNDE, 94(11), 1185–1188.

LIAO, X. Z., SERQUIS, A., JIA, Q. X., & al. (2003). Effect of catalyst composition on carbon nanotube growth. APPLIED PHYSICS LETTERS, 82(16), 2694–2696.

Huang, J. Y., Liao, X. Z., Zhu, Y. T., Zhou, F., & Lavernia, E. J. (2003). Grain boundary structure of nanocrystalline Cu processed by cryomilling. Philosophical Magazine, 83(12), 1407–1419. https://doi.org/10.1080/1478643031000083633

HUANG, J. Y., LIAO, X. Z., ZHU, Y. T., & al. (2003). Grain boundary structure of nanocrystalline Cu processed by cryomilling. PHILOSOPHICAL MAGAZINE, 83(12), 1407–1419.

STOLYAROV, VV, ZHU, Y. T., ALEXANDROV, IV, & al. (2003). Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 343(1-2), 43–50.

CIVALE, L., SERQUIS, A., HAMMON, D. L., & al. (2003). High critical currents in powder in tube MgB2 wires: Influence of microstructure and heat treatments. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 13(2), 3347–3350.

SERQUIS, A., CIVALE, L., HAMMON, D. L., & al. (2003). Hot isostatic pressing of powder in tube MgB2 wires. APPLIED PHYSICS LETTERS, 82(17), 2847–2849.

ZHU, Y. T., & BEYERLEIN, I. J. (2003). Issues on the design of bone-shaped short fiber composites. JOURNAL OF ADVANCED MATERIALS, 35(2), 51–60.

HE, J. H., CHUNG, K. H., LIAO, X. Z., & al. (2003). Mechanical milling-induced deformation twinning in Fcc materials with high stacking fault energy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 34(3), 707–712.

LIAO, X. Z., SERQUIS, A., ZHU, Y. T., & al. (2003). Mg(B,O)(2) precipitation in MgB2. JOURNAL OF APPLIED PHYSICS, 93(10), 6208–6215.

ZHOU, F., LIAO, X. Z., ZHU, Y. T., & al. (2003). Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling. ACTA MATERIALIA, 51(10), 2777–2791.

SERQUIS, A., CIVALE, L., HAMMON, D. L., & al. (2003). Microstructure and high critical current of powder-in-tube MgB2. APPLIED PHYSICS LETTERS, 82(11), 1754–1756.

HUANG, J. Y., ZHU, Y. T., LIAO, X. Z., & al. (2003). Microstructure of cryogenic treated M2 tool steel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 339(1-2), 241–244.

ZHU, Y. T., KOLOBOV, Y. R., GRABOVETSKAYA, G. P., & al. (2003). Microstructures and mechanical properties of ultrafine-grained Ti foil processed by equal-channel angular pressing and cold rolling. JOURNAL OF MATERIALS RESEARCH, 18(4), 1011–1016.

FINDIKOGLU, A. T., SERQUIS, A., CIVALE, L., & al. (2003). Microwave performance of high-density bulk MgB2. APPLIED PHYSICS LETTERS, 83(1), 108–110.

Liao, X. Z., Huang, J. Y., Zhu, Y. T., Zhou, F., & Lavernia, E. J. (2003). Nanostructures and deformation mechanisms in a cryogenically ball-milled Al-Mg alloy. Philosophical Magazine, 83(26), 3065–3075. https://doi.org/10.1080/1478643031000152799

LIAO, X. Z., HUANG, J. Y., ZHU, Y. T., & al. (2003). Nanostructures and deformation mechanisms in a cryogenically ball-milled Al-Mg alloy. PHILOSOPHICAL MAGAZINE, 83(26), 3065–3075.

ZHU, Y. T., HUANG, J. Y., GUBICZA, J., & al. (2003). Nanostructures in Ti processed by severe plastic deformation. JOURNAL OF MATERIALS RESEARCH, 18(8), 1908–1917.

SERQUIS, A., CIVALE, L., HAMMON, D. L., & al. (2003). Role of excess Mg and heat treatments on microstructure and critical current of MgB2 wires. JOURNAL OF APPLIED PHYSICS, 94(6), 4024–4031.

SERQUIS, A., LIAO, X. Z., CIVALE, L., & al. (2003). The influence of structural defects on intra-granular critical currents of bulk MgB2. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 13(2), 3068–3071.

HUANG, J. Y., & ZHU, Y. T. (2002). Atomic-scale structural investigations on the nucleation of cubic boron nitride from amorphous boron nitride under high pressures and temperatures. CHEMISTRY OF MATERIALS, 14(4), 1873–1878.

ZHU, Y. T., & BEYERLEIN, I. J. (2002). Bone-shaped short fiber composites - an overview. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 326(2), 208–227.

LIAO, X. Z., SERQUIS, A. C., ZHU, Y. T., & al. (2002). Controlling flux pinning precipitates during MgB2 synthesis. APPLIED PHYSICS LETTERS, 80(23), 4398–4400.

SERQUIS, A., ZHU, Y. T., PETERSON, D. E., & al. (2002). Degradation of MgB2 under ambient environment. APPLIED PHYSICS LETTERS, 80(23), 4401–4403.

HUANG, J. Y., PARK, B. H., JAN, D., & al. (2002). High-resolution transmission electron microscopy study of defects and interfaces in epitaxial TiO2 films on sapphire and LaAlO3. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 82(4), 735–749.

SERQUIS, A., LIAO, X. Z., ZHU, Y. T., & al. (2002). Influence of microstructures and crystalline defects on the superconductivity of MgB2. JOURNAL OF APPLIED PHYSICS, 92(1), 351–356.

ZHU, Y. T., SHU, L., & BUTT, D. P. (2002). Kinetics and products of molybdenum disilicide powder oxidation. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 85(2), 507–509.

KLIE, R. F., IDROBO, J. C., BROWNING, N. D., & al. (2002). Observation of coherent oxide precipitates in polycrystalline MgB2. APPLIED PHYSICS LETTERS, 80(21), 3970–3972.

VALIEV, R. Z., ALEXANDROV, IV, ZHU, Y. T., & al. (2002). Paradox of strength and ductility in metals processed by severe plastic deformation. JOURNAL OF MATERIALS RESEARCH, 17(1), 5–8.

ZHU, Y. T., SHU, L., PETERSON, E. J., & al. (2002). Rietveld refinement of crystal chemistry of RBa4Cu3O8.5+delta (R = rare earth). JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 63(1), 23–29.

SHIN, D. H., KIM, I., KIM, J., & al. (2002). Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 334(1-2), 239–245.

ZHAO, Y., HE, D. W., DAEMEN, L. L., & al. (2002). Superhard B-C-N materials synthesized in nanostructured bulks. JOURNAL OF MATERIALS RESEARCH, 17(12), 3139–3145.

ZHU, Y. T., JIANG, H. G., HUANG, J. Y., & al. (2001). A new route to bulk nanostructured metals. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 32(6), 1559–1562.

JIA, D., WANG, Y. M., RAMESH, K. T., & al. (2001). Deformation behavior and plastic instabilities of ultrafine-grained titanium. APPLIED PHYSICS LETTERS, 79(5), 611–613.

SERQUIS, A., ZHU, Y. T., PETERSON, E. J., & al. (2001). Effect of lattice strain and defects on the superconductivity of MgB2. APPLIED PHYSICS LETTERS, 79(26), 4399–4401.

ZHU, Y. T., BEYERLEIN, I. J., VALDEZ, J. A., & al. (2001). Fracture toughness of a composite reinforced with bone-shaped short fibers. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 317(1-2), 93–100.

STOLYAROV, VV, ZHU, Y. T., ALEXANDROV, IV, & al. (2001). Influence of ECAP routes on the microstructure and properties of pure Ti. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 299(1-2), 59–67.

STOLYAROV, VV, ZHU, Y. T., LOWE, T. C., & al. (2001). Microstructure and properties of pure Ti processed by ECAP and cold extrusion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 303(1-2), 82–89.

HUANG, J. Y., ZHU, Y. T., JIANG, H., & al. (2001). Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening. ACTA MATERIALIA, 49(9), 1497–1505.

STOLYAROV, VV, ZHU, Y. T., LOWE, T. C., & al. (2001). Microstructures and properties of ultrafine-grained pure titanium processed by equal-channel angular pressing and cold deformation. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 1(2), 237–242.

BEYERLEIN, I. J., ZHU, Y. T., & MAHESH, S. (2001). On the influence of fiber shape in bone-shaped short-fiber composites. COMPOSITES SCIENCE AND TECHNOLOGY, 61(10), 1341–1357.

HUANG, J. Y., ZHU, Y. T., & MORI, H. (2001). Structure and phase characteristics of amorphous boron-carbon-nitrogen under high pressure and high temperature. JOURNAL OF MATERIALS RESEARCH, 16(4), 1178–1184.

HUANG, J. Y., & ZHU, Y. T. (2000). Advances in the synthesis and characterization of boron nitride. DEFECTS AND DIFFUSION IN CERAMICS, 186-1, 1–32.

ZHU, Y. T., & LOWE, T. C. (2000). Application of, and precautions for the use of, the rule of additivity in phase transformation. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 31(4), 675–682.

WANG, H. L., ROMERO, R. J., MATTES, B. R., & al. (2000). Effect of processing conditions on the properties of high molecular weight conductive polyaniline fiber. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 38(1), 194–204.

JIANG, H. G., ZHU, Y. T., BUTT, D. P., & al. (2000). Microstructural evolution, microhardness and thermal stability of HPT-processed Cu. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 290(1-2), 128–138.

ZHU, Y. T., & LOWE, T. C. (2000). Observations and issues on mechanisms of grain refinement during ECAP process. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 291(1-2), 46–53.

Overview and outlook for materials processed by severe plastic deformation. (2000). In Investigations and Applications of Severe Plastic Deformation (Vol. 80, pp. 347–356).

STOLYAROV, VV, ZHU, Y. T., LOWE, T. C., & al. (2000). Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 282(1-2), 78–85.

JIANG, H. G., VALDEZ, J. A., ZHU, Y. T., & al. (2000). The strength and toughness of cement reinforced with bone-shaped steel wires. COMPOSITES SCIENCE AND TECHNOLOGY, 60(9), 1753–1761.

STOLYAROV, VV, ZHU, Y. T., LOWE, T. C., & al. (1999). A two step SPD processing of ultrafine-grained titanium. NANOSTRUCTURED MATERIALS, 11(7), 947–954.

ZHU, Y. T., BALDONADO, P. S., BINGERT, J. F., & al. (1999). Compressive anneal processing (CAP) of Bi2223 superconducting tapes. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 12(9), 640–644.

STOLYAROV, VV, SHESTAKOVA, L. O., ZHU, Y. T., & al. (1999). Formation of metastable states in nanostructured Al- and Ti -based alloys by the SPTS technique. NANOSTRUCTURED MATERIALS, 12(5-8), 923–926.

ZHU, Y. T., VALDEZ, J. A., BEYERLEIN, I. J., & al. (1999). Mechanical properties of bone-shaped-short-fiber reinforced composites. ACTA MATERIALIA, 47(6), 1767–1781.

JIANG, H. G., ZHU, Y. T., & BUTT, D. P. (1999). Oxidation kinetics of hexagonal-shaped single-crystal silicon whiskers. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 82(10), 2791–2795.

ZHU, Y. T., PETERSON, E. J., BALDONADO, P. S., & al. (1999). Synthesis and crystal chemistry of the new compounds GdBa4Cu3O8.5+delta and DyBa4Cu3O8.5+delta. JOURNAL OF MATERIALS RESEARCH, 14(2), 334–339.

ZHU, Y. T., STAN, M., CONZONE, S. D., & al. (1999). Thermal oxidation kinetics of MoSi2-based powders. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 82(10), 2785–2790.

ZHU, Y. T., VALDEZ, J. A., SHI, N., & al. (1998). A composite reinforced with bone-shaped short fibers. SCRIPTA MATERIALIA, 38(9), 1321–1325.

TAYLOR, S. T., ZHU, Y. T., BLUMENTHAL, W. R., & al. (1998). Characterization of Nicalon fibres with varying diameters - Part I - Strength and fracture studies. JOURNAL OF MATERIALS SCIENCE, 33(6), 1465–1473.

ZHU, Y. T., TAYLOR, S. T., STOUT, M. G., & al. (1998). Characterization of Nicalon fibres with varying diameters - Part II - Modified Weibull distribution. JOURNAL OF MATERIALS SCIENCE, 33(6), 1475–1480.

ALEXANDROV, IV, ZHU, Y. T., LOWE, T. C., & al. (1998). Consolidation of nanometer sized powders using severe plastic torsional straining. NANOSTRUCTURED MATERIALS, 10(1), 45–54.

ZHU, Y. T., PETERSON, E. J., BALDONADO, P. S., & al. (1998). Crystal structure and chemistry of four new RBa4Cu3O8.5+delta (R = Ho, Er, Tm and Yb) compounds. JOURNAL OF ALLOYS AND COMPOUNDS, 281(2), 137–145.

ZHU, Y. T., BUTT, D. P., TAYLOR, S. T., & al. (1998). Evaluation of a modified Weibull distribution for describing the strength of ceramic fibers and whiskers with varying diameters. JOURNAL OF TESTING AND EVALUATION, 26(2), 144–150.

Zhu, Y. T., Valdez, J. A., Shi, N., Lovato, M. L., Stout, M. G., Zhou, S. J., … Lowe, T. C. (1998). Influence of reinforcement morphology on the mechanical properties of short-fiber composites. In Processing of Metals and Advanced Materials: Modeling, Design and Properties (pp. 251–259).

ZHU, Y. T., TAYLOR, S. T., STOUT, M. G., & al. (1998). Kinetics of thermal, passive oxidation of Nicalon fibers. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 81(3), 655–660.

ALEXANDROV, IV, ZHU, Y. T., LOWE, T. C., & al. (1998). Microstructures and properties of nanocomposites obtained through SPTS consolidation of powders. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 29(9), 2253–2260.

ALEXANDROV, IV, ZHU, Y. T., LOWE, T. C., & al. (1998). Severe plastic deformation: new technique for powder consolidation and grain size refinement. POWDER METALLURGY, 41(1), 11–13.

ZHU, Y. T., PETERSON, E. J., BALDONADO, P. S., & al. (1998). Synthesis and characterization of the new compound EuBa4Cu3O8.5+delta. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 59(8), 1331–1336.

ZHU, Y. T., BALDONADO, P. S., PETERSON, E. J., & al. (1998). Variation of oxygen content and crystal chemistry of YBa4Cu3O8.5+delta. PHYSICA C, 298(1-2), 29–36.

ZHU, Y. T., BLUMENTHAL, W. R., TAYLOR, S. T., & al. (1997). Analysis of size dependence of ceramic fiber and whisker strength. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 80(6), 1447–1452.

ZHU, Y. T., LOWE, T. C., & ASARO, R. J. (1997). Assessment of the theoretical basis of the Rule of Additivity for the nucleation incubation time during continuous cooling. JOURNAL OF APPLIED PHYSICS, 82(3), 1129–1137.

ZHU, Y. T., BLUMENTHAL, W. R., & LOWE, T. C. (1997). Determination of non-symmetric 3-D fiber-orientation distribution and average fiber length in short-fiber composites. JOURNAL OF COMPOSITE MATERIALS, 31(13), 1287–1301.

MATTES, B. R., WANG, H. L., YANG, D., & al. (1997). Formation of conductive polyaniline fibers derived from highly concentrated emeraldine base solutions. SYNTHETIC METALS, 84(1-3), 45–49.

ZHU, Y. T., BALDONADO, P. S., PETERSON, E. J., & al. (1997). Powder diffraction data of SmBa4Cu3O8.5+delta. POWDER DIFFRACTION, 12(4), 242–244.

ZHU, Y. T., BLUMENTHAL, W. R., & LOWE, T. C. (1997). The tensile strength of short fibre-reinforced composites. JOURNAL OF MATERIALS SCIENCE, 32(8), 2037–2043.

BLUMENTHAL, W. R., ZHU, Y. T., LOWE, T. C., & al. (1996). Deformation state effects on the J(c) of BSCCO tapes. PHYSICA C, 260(1-2), 33–40.

ZHU, Y. T., & MANTHIRAM, A. (1996). Influence of processing parameters on the formation of WC-Co nanocomposite powder using a polymer as carbon source. COMPOSITES PART B-ENGINEERING, 27(5), 407–413.

ZHU, Y. T., & MANTHIRAM, A. (1995). A THERMOGRAVIMETRIC STUDY OF THE INFLUENCE OF INTERNAL-STRESSES ON OXYGEN VARIATIONS IN LN(2-X)CE(X)CUO(4). JOURNAL OF SOLID STATE CHEMISTRY, 114(2), 491–498.

ZHU, Y. T., GAO, Y. P., DEVLETIAN, J. H., & al. (1995). DIFFERENTIAL THERMAL-ANALYSIS OF SOLID ZIRCONIUM. JOURNAL OF TESTING AND EVALUATION, 23(6), 431–435.

ZHOU, J. P., SAVOY, S. M., LO, R. K., & al. (1995). IMPROVED CORROSION-RESISTANCE OF CATION SUBSTITUTED YBA2CU3O7-DELTA. APPLIED PHYSICS LETTERS, 66(21), 2900–2902.

ZHU, Y. T., DEVLETIAN, J. H., CHEN, S. J., & al. (1995). ON THE NONUNIFORM DISTRIBUTIONS OF TEMPERATURE AND THERMAL-STRESS IN DTA TESTING. JOURNAL OF TESTING AND EVALUATION, 23(1), 63–66.

ZHU, Y. T., & MANTHIRAM, A. (1994). A NEW ROUTE FOR THE SYNTHESIS OF TUNGSTEN CARBIDE COBALT NANOCOMPOSITES. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 77(10), 2777–2778.

ZHU, Y. T., & MANTHIRAM, A. (1994). A NEW ROUTE FOR THE SYNTHESIS OF TUNGSTEN-OXIDE BRONZES. JOURNAL OF SOLID STATE CHEMISTRY, 110(1), 187–189.

ZHOU, J. P., SAVOY, S. M., ZHAO, J. N., & al. (1994). CHEMICALLY TAILORED, CORROSION-RESISTANT, HIGH-T-C PHASES. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 116(20), 9389–9390.

MANTHIRAM, A., DANANJAY, A., & ZHU, Y. T. (1994). NEW ROUTE TO REDUCED TRANSITION-METAL OXIDES. CHEMISTRY OF MATERIALS, 6(10), 1601–1602.

MANTHIRAM, A., & ZHU, Y. T. (1994). ON THE ABSENCE OF SUPERCONDUCTIVITY IN GD2-XCEXCUO4. PHYSICA C, 226(1-2), 165–169.

ZHU, Y. T., & MANTHIRAM, A. (1994). ROLE OF BOND-LENGTH MISMATCH IN L2-XCEXCUO4 (L=LANTHANIDE). PHYSICAL REVIEW B, 49(9), 6293–6298.

ZHU, Y. T., & MANTHIRAM, A. (1994). ROLE OF OXYGEN IN LN(2-X)CE(X)CUO4 SUPERCONDUCTORS. PHYSICA C, 224(3-4), 256–262.

ZHU, Y. T., ZONG, G., MANTHIRAM, A., & al. (1994). STRENGTH ANALYSIS OF RANDOM SHORT-FIBER-REINFORCED METAL-MATRIX COMPOSITE-MATERIALS. JOURNAL OF MATERIALS SCIENCE, 29(23), 6281–6286.

MANTHIRAM, A., & ZHU, Y. T. (1993). CHEMISTRY OF ELECTRON-DOPED LN2-XCEXCUO4 SUPERCONDUCTORS. JOURNAL OF ELECTRONIC MATERIALS, 22(10), 1195–1198.

ZHU, Y. T., & ZONG, G. S. (1993). ON THE APPLICATION OF THE STATISTICAL STRENGTH MODEL OF FIBER-REINFORCED COMPOSITES. JOURNAL OF COMPOSITE MATERIALS, 27(9), 944–959.

ZHU, Y. T., & DEVLETIAN, J. H. (1992). THERMAL-STRESS AND STRAIN EFFECTS ON PHASE-TRANSITION TEMPERATURES IN DIFFERENTIAL THERMAL-ANALYSIS TESTING. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 23(2), 451–455.

ZHU, Y. T., & DEVLETIAN, J. H. (1991). DETERMINATION OF EQUILIBRIUM SOLID-PHASE TRANSITION-TEMPERATURE USING DTA. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 22(9), 1993–1998.

ZHU, Y. T., & DEVLETIAN, J. H. (1991). PRECISE DETERMINATION OF ISOMORPHOUS AND EUTECTOID TRANSFORMATION TEMPERATURES IN BINARY AND TERNARY ZR ALLOYS. JOURNAL OF MATERIALS SCIENCE, 26(22), 6218–6222.

ZHU, Y. T., & DEVLETIAN, J. H. (1991). PRECISE DTA TESTING OF HIGHLY REACTIVE ALLOYS. ADVANCED MATERIALS & PROCESSES, 140(4), 51–53.

ZHU, Y. T., ZHOU, B. L., HE, G. H., & al. (1989). A STATISTICAL-THEORY OF COMPOSITE-MATERIALS STRENGTH. JOURNAL OF COMPOSITE MATERIALS, 23(3), 280–287.