Nonwovens Institute - 2010

Arambakam, R., Hosseini, S. A., .Tafreshi, H. V., & Pourdeyhimi, B. (2010, November). A 2-D Monte Carlo Simulation of Radiative Heat in Fibrous media. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Pourdeyhimi, B. (2010). High Volume Micro & NanoFiber Production by Fiber Fibrillation. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Shim, E., Suragani Venu, L. B., Anantharamaiah, N., & Pourdeyhimi, B. (2010, November). Visualization of 3D Structures of Hydroentangled Nonwovens. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Anantharamaiah, N., & Pourdeyhimi, B. (2010, November). Elastomeric Durable Nonwovens Through the use of Novel Bicomponent Fibers. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

So, J., Thelen, J., Zhu, S., Barnes, W., Pourdeyhimi, B., & Dickey, M. (2010, November). Highly Stretchable Conductive Fibers. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Lui, X., Rojas, O., Genzer, J., & Pourdeyhimi, B. (2010, November). The Generation and Stability of Organic Films on Textile Surfaces. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Sahbaee, A., Oxenham, W., & Pourdeyhimi, B. (2010). Novel Mechanism For Fabricating Aligned Electrospun Fibers and Converting Them to Nano-Structured Yarn. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Kilic, A., Shim, E., Yeom, B., & Pourdeyhimi, B. (2010). Polypropylene Nanofiber Production Via Melt Electrospinning Method. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Aykut, Y., Khan, S., & Pourdeyhimi, B. (2010). Sol-Gel Electrospinning of Ceramic Nanofibers. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Tahir, M. A., Tafreshi, H. V., & Pourdeyhimi, B. (2010, November). Modeling Radiative Heat Transfer in Fibrous Insulation Media. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Young, P., Stahl, J., Anantharamaiah, N., & Pourdeyhimi, B. (2010, November). Modifying the Structure and Properties of Flash Spun Webs by Hydroentangling. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Hassan, M., Khan, S., & Pourdeyhimi, B. (2010). Nano-Meltblown Fibers for High Efficiency Filters. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Yarin, A., Pourdeyhimi, B., & Sinha-Ray, S. (2010). Solution Blowing of Monolithic, Blended And Core-Shell Nanofibers. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Shim, E., & Pourdeyhimi, B. (2010). Nano-composite fibers: Incorporation of Inorganic Nano-Particular Additives. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Honarbakhsh, S., & Pourdeyhimi, B. (2010). Nano-Fibrous Drug delivery Systems. Presented at the Nanofibers for the 3rd Millennium, Raleigh, NC.

Davis, S., & Pourdeyhimi, B. (2010, November). High Performance Coated Nonwovens for Outdoor Structures. Presented at the NET Inc., Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Ghosh, T., Cottrell, S., Anantharamaiah, N., & Pourdeyhimi, B. (2010, November). Durable and Luanderable Antimicrobial Nonwovens. Presented at the NET Inc.,Technical Association of the Pulp & Paper Industry (TAPPI), Raleigh, NC.

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2010, November). Modeling the Role of Fiber Orientation and Fiber Diameter Distribution on Collection Efficiency and Pressure Drop of Fibrous Filters. Presented at the NET Inc., TAPPI, Raleigh, NC.

Nagle, H. T., Kang, T.-H., Merritt, C., Karaguzel, B., Pourdeyhimi, B., & Grant, E. (2010). Sensor device for real-time monitoring or relative movement using capacitive fabric sensors (Patent No. US7712373B2).

Haslauer, C. M., Pourdeyhimi, B., & Loboa, E. G. (2010). Validation of Nanoporous Hollow Fiber Scaffolds for Bone Tissue Engineering Using hASCs. Proceedings of the 14th Annual Hilton Head Workshop: Regenerative Medicine: Advancing to Next Generation Therapies. Presented at the 14th Annual Hilton Head Workshop: Regenerative Medicine: Advancing to Next Generation Therapies, Hilton Head, SC.

Haslauer, C. M., Pourdeyhimi, B., & Lobos, E. G. (2010). Islands-in-the-sea Fibers With Interconnected Micropores For Bone Tissue Engineering. Proceedings of the 56th Annual Meeting of the Orthopaedic Research Society. Presented at the 56th Annual Meeting of the Orthopaedic Research Society, New Orleans, LA.

Pourdeyhimi, B., & Little, T. J. (2010). Three-Dimensional Deep Molded Structures with Enhanced Properties (Australia Patent No. 2004236166).

Das, D., & Pourdeyhimi, B. (2010). Compressional and recovery behaviour of highloft nonwovens. Indian Journal of Fibre & Textile Research, 35(4), 303–309.

Liu, X., Wu, D., Turgman-Cohen, S., Genzer, J., Theyson, T. W., & Rojas, O. J. (2010). Adsorption of a Nonionic Symmetric Triblock Copolymer on Surfaces with Different Hydrophobicity. LANGMUIR, 26(12), 9565–9574. https://doi.org/10.1021/la100156a

Ramasubramanian, M. K., Shiffler, D. A., & Jayachandran, A. (2010). A computational fluid dynamics modeling and experimental study of the mixing process for dispersion of synthetic fibers in wet-lay forming. TAPPI Journal, 9(3), 6–13.

Spagnola, J. C., Gong, B., Arvidson, S. A., Jur, J. S., Khan, S. A., & Parsons, G. N. (2010). Surface and sub-surface reactions during low temperature aluminium oxide atomic layer deposition on fiber-forming polymers. JOURNAL OF MATERIALS CHEMISTRY, 20(20), 4213–4222. https://doi.org/10.1039/c0jm00355g

Liu, X., Song, J., Wu, D., Genzer, J., Theyson, T., & Rojas, O. J. (2010). Surface and Friction Behavior of a Silicone Surfactant Adsorbed on Model Textiles Substrates. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 49(18), 8550–8557. https://doi.org/10.1021/ie1012213

Tahir, M. A., Tafreshi, H. V., Hosseini, S. A., & Pourdeyhimi, B. (2010). Modeling the role of microstructural parameters in radiative heat transfer through disordered fibrous media. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(21-22), 4629–4637. https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.030

Shim, E., Pourdeyhimi, B., & Latifi, M. (2010). Three-dimensional analysis of segmented pie bicomponent nonwovens. JOURNAL OF THE TEXTILE INSTITUTE, 101(9), 773–787. https://doi.org/10.1080/00405000903357938

Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2010). The production of 100/400 nm inner/outer diameter carbon tubes by solution blowing and carbonization of core-shell nanofibers. CARBON, 48(12), 3575–3578. https://doi.org/10.1016/j.carbon.2010.05.056

Jung, K.-H., Ji, L., Pourdeyhimi, B., & Zhang, X. (2010). Structure-property relationships of polymer-filled nonwoven membranes for chemical protection applications. JOURNAL OF MEMBRANE SCIENCE, 361(1-2), 63–70. https://doi.org/10.1016/j.memsci.2010.06.010

Datla, V. M., Beck, K., Shim, E., & Pourdeyhimi, B. (2010). Reverse Phase HPLC Analysis of Commercial Surfactants used as Melt Additives. TENSIDE SURFACTANTS DETERGENTS, 47(3), 142–150. https://doi.org/10.3139/113.110063

Yarin, A. L., Sinha-Ray, S., & Pourdeyhimi, B. (2010). Meltblowing: II-linear and nonlinear waves on viscoelastic polymer jets. JOURNAL OF APPLIED PHYSICS, 108(3). https://doi.org/10.1063/1.3457893

Sinha-Ray, S., Yarin, A. L., & Pourdeyhimi, B. (2010). Meltblowing: I-basic physical mechanisms and threadline model. JOURNAL OF APPLIED PHYSICS, 108(3). https://doi.org/10.1063/1.3457891

Sumanasinghe, R. D., Haslauer, C. M., Pourdeyhimi, B., & Loboa, E. G. (2010). Melt Spun Microporous Fibers Using Poly(lactic acid) and Sulfonated Copolyester Blends for Tissue Engineering Applications. JOURNAL OF APPLIED POLYMER SCIENCE, 117(6), 3350–3361. https://doi.org/10.1002/app.32025

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2010). Influence of fiber orientation distribution on performance of aerosol filtration media. CHEMICAL ENGINEERING SCIENCE, 65(18), 5285–5293. https://doi.org/10.1016/j.ces.2010.06.032

McCullen, S. D., Miller, P. R., Gittard, S. D., Gorga, R., POURDEYHIMI, B. E. H. N. A. M., Narayan, R. J., & Loboa, E. G. (2010). In situ collagen polymerization of layered cell-seeded electrospun scaffolds for bone tissue engineering applications. Tissue Engineering. Part C, Methods, 16(5), 1095–1105. https://doi.org/10.1089/ten.tea.2009.0753

Talwar, S., Krishnan, A. S., Hinestroza, J. P., Pourdeyhimi, B., & Khan, S. A. (2010). Electrospun Nanofibers with Associative Polymer-Surfactant Systems. MACROMOLECULES, 43(18), 7650–7656. https://doi.org/10.1021/ma1013447

Jung, K.-H., Pourdeyhimi, B., & Zhang, X. (2010). Chemical protection performance of polystyrene sulfonic acid-filled polypropylene nonwoven membranes. JOURNAL OF MEMBRANE SCIENCE, 362(1-2), 137–142. https://doi.org/10.1016/j.memsci.2010.06.031

Yeom, B. Y., Shim, E., & Pourdeyhimi, B. (2010). Boehmite nanoparticles incorporated electrospun nylon-6 nanofiber web for new electret filter media. MACROMOLECULAR RESEARCH, 18(9), 884–890. https://doi.org/10.1007/s13233-010-0910-5

Wong, K. C., Haslauer, C. M., Anantharamaiah, N., Pourdeyhimi, B., Batchelor, A. D., & Griffis, D. P. (2010). Focused Ion Beam Characterization of Bicomponent Polymer Fibers. MICROSCOPY AND MICROANALYSIS, 16(3), 282–290. https://doi.org/10.1017/s1431927610000115

Fotovati, S., Tafreshi, H. V., Ashari, A., Hosseini, S. A., & Pourdeyhimi, B. (2010). Analytical expressions for predicting capture efficiency of bimodal fibrous filters. JOURNAL OF AEROSOL SCIENCE, 41(3), 295–305. https://doi.org/10.1016/j.jaerosci.2010.01.002

Arvidson, S. A., Khan, S. A., & Gorga, R. E. (2010). Mesomorphic-alpha-Monoclinic Phase Transition in Isotactic Polypropylene: A Study of Processing Effects on Structure and Mechanical Properties. MACROMOLECULES, 43(6), 2916–2924. https://doi.org/10.1021/ma1001645