Energy Collaborative

Techno-economic analysis of combined cycle systems

In Combined Cycle Systems for Near-Zero Emission Power Generation (pp. 306–328).

Estimation of light-duty gasoline vehicle emissions avoided by passenger rail service in North Carolina

Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 2, 1001–1007. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876198041&partnerID=MN8TOARS

Energy use and emissions from diesel and biodiesel blends for earthmoving equipment

Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition, AWMA, 1, 609–616. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907338054&partnerID=MN8TOARS

Advanced Bus Bar System Design

IEEE Energy Conversion Congress and Exposition, ECCE. Presented at the IEEE Energy Conversion Congress and Exposition, ECCE, Raleigh, N.C.

Bus Bars – Slap Them Together and They Ought to Work

27th Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 27th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Orlando, FL.

Biogenic carbon accounting: Key considerations to a revised framework

(No. NI WP 12-06). Durham, NC: Duke University.

Forest biomass supply for bioenergy in the southeast: evaluating assessment scale

In W. McWilliams & F. A. Roesch (Eds.), Monitoring across borders: Proceedings of the 2010 joint meeting of the Forest Inventory and Analysis (FIA) symposium and the southern mensurationists (pp. 255–263). Asheville, NC: U.S. Forest Service, Southern Research Station.

Coal-Direct Chemical Looping Gasification for Hydrogen Production: Reactor Modeling and Process Simulation

Energy & Fuels, 26(6), 3680–3690.

Syngas Chemical Looping Process: Design and Construction of a 25 kWth Subpilot Unit

Energy & Fuels, 26(4), 2292–2302.

Printable Packaging for High Power, High Temperature Power Module

Presented at the IEEE Applied Power Electronics Conference, Orlando, FL.

Point Source Thermal Management in Dense Power Modules and Systems

Special session presented at the IEEE Applied Power Electronics Conference, Orlando, FL.

New Porous Crystals of Extended Metal-Catecholates

Chemistry of Materials, 24(18), 3511–3513.

Results for an Al/AlN composite 350°C SiC solid-state circuit breaker module

2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 2012 IEEE Applied Power Electronics Conference and Exposition - APEC 2012, Orlando, FL.

Extreme Thermal Transient Stress Analysis with Pre-Stress in a Metal Matrix Composite Power Package

Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT), 2012(HITEC), 000361–000372.

Development of Printed Power Packaging for a High Voltage SiC Module

International Symposium on Microelectronics, 2012(1), 000955–000960.

Mean time to failure of SnAgCuNi solder joints under DC

13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems. Presented at the 2012 13th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).

Probabilistic Water Quality Trading conditional on seasonal nutrient forecasts

Arumugam, S. (2012, June). Presented at the University of New South Wales, Sydney, Australia.

Uncertainty Reduction in Climate Forecasts using Multimodel Combination and their Relevance to Water Management

Arumugam, S. (2012, August). Presented at the CSIRO (Land and Water), Melbourne, Australia.

Decomposition of Sources of Errors in Seasonal Streamflow Forecasts in a Rainfall-Runoff Dominated Basin

Sinha, T., & Arumugam, S. (2012, December 3). Presented at the American Geophysical Union Fall Meeting, San Francisco, CA.

Estimating Required Reservoir Storage from Synthetically Generated Streamflow through a Hierarchical Bayesian Framework Combining Observed and Paleo Streamflow

Patskoski, J., & Arumugam, S. (2012, December 3). Presented at the American Geophysical Union Fall Meeting, San Francisco, CA.