Center for Additive Manufacturing and Logistics - 2014

Hopkins, D. C. (2014). Introduction to 3D Printed Power Electronics & Wide Bandgap Power Semiconductor Packaging. 47th Symposium on Microelectronics (IMAPS 2014). Presented at the 47th Symposium on Microelectronics (IMAPS 2014), San Diego, CA. Retrieved from http://w.gmsystems.com/uploads/3/1/4/3/3143302/imaps2014.pdf

Carrillo, C., Saloni, D., & Rojas, O. (2014). Fiber pretreatment in the production of cellulose nanofibrils. Presented at the 247th National Spring Meeting of the American-Chemical-Society (ACS), Dallas, TX.

Lin, P. C., & Uzsoy, R. (2014, May). Analysis of Release Changes with Fixed Lead Time and Capacity. Presented at the Industrial and Systems Engineering Research Conference, Montreal, PQ, Canada.

Uzsoy, R. (2014). (Almost) present at the creation: 25 years of modelling and simulation in semiconductor manufacturing. Presented at the 2014 Winter Simulation Conference - (WSC 2014). https://doi.org/10.1109/wsc.2014.7020094

Pulat, P. S., Sarin, S. C., & Uzsoy, R. (Eds.). (2014). Essays in Production, Project Planning and Scheduling. https://doi.org/10.1007/978-1-4614-9056-2

Hopkins, D. C., Xu, Y., & Ke, H. (2014). Printed Interfacial Interconnects in High Power Module. Special Session presented at the IEEE Applied Power Electronics Conference, Ft. Worth, TX.

Xu, Y., & Hopkins, D. C. (2014). Thermal-mechanical design and optimization for DBC based power modules [NSF FREEDM System Center Annual Industrial Review].

Ke, H., Morgan, A., Aman, R., & Hopkins, D. C. (2014). 3D Printing in the Micro- & Power-Electronics Packaging World. Presented at the Carolina PCB, Raleigh, NC.

Ke, H., Morgan, A., Aman, R., & Hopkins, D. C. (2014). Investigation of Rapid-Prototyping Methods for 3D Printed Power Electronic Module Development. International Symposium on Microelectronics, 2014(1), 000887–000892. https://doi.org/10.4071/isom-thp52

Wu, S., Kay, M., King, R., Vila-Parrish, A., & Warsing, D. (2014). Multi-objective optimization of 3D packing problem in additive manufacturing. IIE Annual Conference and Expo 2014, 1485–1494. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84910090427&partnerID=MN8TOARS

Albey, E., Bilge, Ü., & Uzsoy, R. (2014). An exploratory study of disaggregated clearing functions for production systems with multiple products. International Journal of Production Research, 52(18), 5301–5322. https://doi.org/10.1080/00207543.2014.899442

Horn, T. J., Harrysson, O. L. A., Marcellin-Little, D. J., West, H. A., Lascelles, B. D. X., & Aman, R. (2014). Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting. Additive Manufacturing, 1-4, 2–11. https://doi.org/10.1016/J.ADDMA.2014.05.001

Velarde, G. J., Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2014). Improving Housing Conditions from the Crawl Space up with a Monitoring and Control System. Housing and Society, 41(1), 53–69. https://doi.org/10.1080/08882746.2014.11430621

Patrick, J. F., Hart, K. R., Krull, B. P., Diesendruck, C. E., Moore, J. S., White, S. R., & Sottos, N. R. (2014). Self-Healing: Continuous Self-Healing Life Cycle in Vascularized Structural Composites (Adv. Mater. 25/2014). Advanced Materials, 26(25), 4189–4189. https://doi.org/10.1002/ADMA.201470166

Lobo, B. J., Wilson, J. R., Thoney, K. A., Hodgson, T. J., & King, R. E. (2014). A practical method for evaluating worker allocations in large-scale dual resource constrained job shops. IIE Transactions, 46(11), 1209–1226. https://doi.org/10.1080/0740817x.2014.892231

Bucci, M. J., Woolard, R., Joines, J., Thoney, K., & King, R. E. (2014). Incorporating economies of scale into facility location problems in carpet recycling. The Journal of The Textile Institute, 105(12), 1300–1311. https://doi.org/10.1080/00405000.2014.890833

Khandaker, M., Vaughan, M., & Starly, B. (2014). The Influence of MgO Nanoparticles on the Osseointegration of Polycaprolactone - Sodium Alginate Hydrogel Interfaces. British Journal of Applied Science & Technology, 4(1), 79–88. https://doi.org/10.9734/bjast/2014/5404

Shirwaiker, R. A., Purser, M. F., & Wysk, R. A. (2014). Scaffolding hydrogels for rapid prototyping based tissue engineering. In Rapid Prototyping of Biomaterials: Principles and Applications (pp. 176–200). https://doi.org/10.1533/9780857097217.176

Cela, C. J., Gosalia, K. C., RamRakhyani, A. K., Lazzi, G., Soora, S., Hayes, G. J., & Dickey, M. D. (2014, August 11). Stimulator Paradigm: Artificial Retina. Handbook of Biomedical Telemetry, pp. 593–622. https://doi.org/10.1002/9781118893715.ch21

Khan, M. R., Trlica, C., & Dickey, M. D. (2014). Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels. Advanced Functional Materials, 25(5), 671–678. https://doi.org/10.1002/adfm.201403042

Patrick, J. F., Hart, K. R., Krull, B. P., Diesendruck, C. E., Moore, J. S., White, S. R., & Sottos, N. R. (2014). Continuous Self-Healing Life Cycle in Vascularized Structural Composites. ADVANCED MATERIALS, 26(25), 4302–4308. https://doi.org/10.1002/adma.201400248

Cumby, B., Heikenfeld, J., Tabor, C., Mast, D., & Dickey, M. (2014). Robust pressure-actuated liquid metal devices showing reconfigurable electromagnetic effects at GHz frequencies. 2014 ieee antennas and propagation society international symposium (apsursi), 553–554.

Tan, Z., Shirwaiker, R. A., & Orndoff, P. E. (2014). Determining optimal current intensity and duration for electrically activated silver-based prophylactic hip implant prototype design. Proceedings of the ASME Summer Bioengineering Conference - 2013, pt B. https://doi.org/10.1115/sbc2013-14141

Huang, H. Y. S., Huang, S. Y., Gettys, T., Prim, P. M., & Harrysson, O. L. (2014). A biomechanical study of directional mechanical properties of porcine skin tissues. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2013, vol 9.

Medina, L. A., Davila, S., Kremer, G. E. O., & Wysk, R. A. (2014). Design for FDA: A predictive model for the FDA's decision time for medical devices. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2013, vol 4. https://doi.org/10.1115/detc2013-13606

Mohammed, M. G., Xenakis, A., & Dickey, M. D. (2014). Production of Liquid Metal Spheres by Molding. METALS, 4(4), 465–476. https://doi.org/10.3390/met4040465

Lacoa, U., Velarde, G. J., & Saloni, D. (2014). US biomass opportunities for value-added biomass exports based on the European Union renewable energy share targets. BioResources, 9(4), 7606–7621. https://doi.org/10.15376/biores.9.4.7606-7621

Khan, M. R., Trlica, C., So, J.-H., Valeri, M., & Dickey, M. D. (2014). Influence of Water on the Interfacial Behavior of Gallium Liquid Metal Alloys. ACS APPLIED MATERIALS & INTERFACES, 6(24), 22467–22473. https://doi.org/10.1021/am506496u

Giddings, A. P., Rardin, R. L., & Uzsoy, R. (2014). Statistical optimum estimation techniques for combinatorial optimization problems: a review and critique. JOURNAL OF HEURISTICS, 20(3), 329–358. https://doi.org/10.1007/s10732-014-9243-4

Xu, Y., & Hopkins, D. C. (2014). Misconception of thermal spreading angle and misapplication to IGBT power modules. 2014 twenty-ninth annual ieee applied power electronics conference and exposition (apec), 545–551. https://doi.org/10.1109/apec.2014.6803362

Khan, M. R., Eaker, C. B., Bowden, E. F., & Dickey, M. D. (2014). Giant and switchable surface activity of liquid metal via surface oxidation. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 111(39), 14047–14051. https://doi.org/10.1073/pnas.1412227111

Huang, H. Y. S., Huang, S. Y., Frazier, C. P., Prim, P. M., & Harrysson, O. (2014). Directional biomechanical properties of porcine skin tissue. Journal of Mechanics in Medicine and Biology, 14(5).

Nypeloe, T., Rodriguez-Abreu, C., Rivas, J., Dickey, M. D., & Rojas, O. J. (2014). Magneto-responsive hybrid materials based on cellulose nanocrystals. CELLULOSE, 21(4), 2557–2566. https://doi.org/10.1007/s10570-014-0307-2

Hayes, G. J., Liu, Y., Genzer, J., Lazzi, G., & Dickey, M. D. (2014). Self-Folding Origami Microstrip Antennas. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 62(10), 5416–5419. https://doi.org/10.1109/tap.2014.2346188

Allensworth, J. R., Liu, Y., Braun, H., Genzer, J., & Dickey, M. D. (2014). In-plane deformation of shape memory polymer sheets programmed using only scissors. POLYMER, 55(23), 5948–5952. https://doi.org/10.1016/j.polymer.2014.07.042

Springer, J. C., Harrysson, O. L. A., Marcellin-Little, D. J., & Bernacki, S. H. (2014). In vitro dermal and epidermal cellular response to titanium alloy implants fabricated with electron beam melting. MEDICAL ENGINEERING & PHYSICS, 36(10), 1367–1372. https://doi.org/10.1016/j.medengphy.2014.07.004

Dickey, M. D. (2014). Emerging Applications of Liquid Metals Featuring Surface Oxides. ACS APPLIED MATERIALS & INTERFACES, 6(21), 18369–18379. https://doi.org/10.1021/am5043017

Trlica, C., Parekh, D. P., Panich, L., Ladd, C., & Dickey, M. D. (2014). 3-D printing of liquid metals for stretchable and flexible conductors. MICRO- AND NANOTECHNOLOGY SENSORS, SYSTEMS, AND APPLICATIONS VI, Vol. 9083. https://doi.org/10.1117/12.2050212

Liu, Y., Mailen, R., Zhu, Y., Dickey, M. D., & Genzer, J. (2014). Simple geometric model to describe self-folding of polymer sheets. PHYSICAL REVIEW E, 89(4). https://doi.org/10.1103/physreve.89.042601

Frigola, P., Harrysson, O. A., Horn, T. J., West, H. A., Aman, R. L., Rigsbee, J. M., … Rodriguez, E. (2014). Fabricating copper components with electron beam melting. Advanced Materials & Processes, 172(7), 20–24.

Gulledge, B. M., Marcellin-Little, D. J., Levine, D., Tillman, L., Harrysson, O. L. A., Osborne, J. A., & Baxter, B. (2014). Comparison of two stretching methods and optimization of stretching protocol for the piriformis muscle. MEDICAL ENGINEERING & PHYSICS, 36(2), 212–218. https://doi.org/10.1016/j.medengphy.2013.10.016

Tejada, J. J., Ivy, J. S., King, R. E., Wilson, J. R., Ballan, M. J., Kay, M. G., … Yankaskas, B. C. (2014). Combined DES/SD model of breast cancer screening for older women, II: screening-and-treatment simulation. IIE Transactions, 46(7), 707–727. https://doi.org/10.1080/0740817x.2013.851436

Godinho Filho, M., & Uzsoy, R. (2014). Assessing the impact of alternative continuous improvement programmes in a flow shop using system dynamics. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 52(10), 3014–3031. https://doi.org/10.1080/00207543.2013.860249

Kacar, N. B., & Uzsoy, R. (2014). A comparison of multiple linear regression approaches for fitting clearing functions to empirical data. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 52(11), 3164–3184. https://doi.org/10.1080/00207543.2013.864052

Kang, Y., Albey, E., Hwang, S., & Uzsoy, R. (2014). The impact of lot-sizing in multiple product environments with congestion. JOURNAL OF MANUFACTURING SYSTEMS, 33(3), 436–444. https://doi.org/10.1016/j.jmsy.2014.04.003

Hayes, G. J., Desai, S. C., Liu, Y., Annamaa, P., Lazzi, G., & Dickey, M. D. (2014). Microfluidic coaxial transmission line and phase shifter. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 56(6), 1459–1462. https://doi.org/10.1002/mop.28327

Liu, Y., Miskiewicz, M., Escuti, M. J., Genzer, J., & Dickey, M. D. (2014). Three-dimensional folding of pre-strained polymer sheets via absorption of laser light. JOURNAL OF APPLIED PHYSICS, 115(20). https://doi.org/10.1063/1.4880160

Norouzi, A., & Uzsoy, R. (2014). Modeling the evolution of dependency between demands, with application to inventory planning. IIE TRANSACTIONS, 46(1), 55–66. https://doi.org/10.1080/0740817x.2013.803637

Qusba, A., RamRakhyani, A. K., So, J.-H., Hayes, G. J., Dickey, M. D., & Lazzi, G. (2014). On the Design of Microfluidic Implant Coil for Flexible Telemetry System. IEEE SENSORS JOURNAL, 14(4), 1074–1080. https://doi.org/10.1109/jsen.2013.2293096

Chung, W.-H., Kremer, G. E. O., & Wysk, R. A. (2014). Life cycle implications of product modular architectures in closed-loop supply chains. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 70(9-12), 2013–2028. https://doi.org/10.1007/s00170-013-5409-8

Shirwaiker, R. A., Wysk, R. A., Kariyawasam, S., Voigt, R. C., Carrion, H., & Nembhard, H. B. (2014). Interdigitated silver-polymer-based antibacterial surface system activated by oligodynamic iontophoresis - An empirical characterization study. BIOMEDICAL MICRODEVICES, 16(1), 1–10. https://doi.org/10.1007/s10544-013-9800-x

Morales, D., Palleau, E., Dickey, M. D., & Velev, O. D. (2014). Electro-actuated hydrogel walkers with dual responsive legs. SOFT MATTER, 10(9), 1337–1348. https://doi.org/10.1039/c3sm51921j

Chung, W.-H., Kremer, G. E. O., & Wysk, R. A. (2014). A Modular Design Approach to Improve Product Life Cycle Performance Based on the Optimization of a Closed-Loop Supply Chain. JOURNAL OF MECHANICAL DESIGN, 136(2). https://doi.org/10.1115/1.4025022

Horn, T. J., Harrysson, O. L. A., West, H. A., II, Little, J. P., & Marcellin-Little, D. J. (2014). Development of a patient-specific bone analog for the biomechanical evaluation of custom implants. RAPID PROTOTYPING JOURNAL, 20(1), 41–49. https://doi.org/10.1108/rpj-08-2012-0069