Center for Additive Manufacturing and Logistics - 2012 Hopkins, D. C. (2012). Advanced Bus Bar System Design. IEEE Energy Conversion Congress and Exposition, ECCE. Presented at the IEEE Energy Conversion Congress and Exposition, ECCE, Raleigh, N.C. Hopkins, D. C. (2012). Bus Bars – Slap Them Together and They Ought to Work. 27th Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 27th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Orlando, FL. Traverson, M., & Gogny, A. (2012). A case of hematuria associated with prostatic cysts in a young dog = Un cas d’hématurie associée à des kystes prostatiques chez un jeune chien. Point Vétérinaire, 43(330), 54–58. Pirraglia, A., Gonzalez, R., Denig, J., Saloni, D., & Wright, J. (2012). Assessment of the most adequate pre-treatments and woody biomasses intended for direct co-firing in the U.S. BioResources, 7(4), 4817–4842. https://doi.org/10.15376/biores.7.4.4817-4842 Saloni, D., Pirraglia, A., Denig, J., & Gonzalez, R. (2012, November). Supply chain analysis and evaluation of manufacturing solid biofuels for the U.S. market. Presented at the SHPE National Conference, Fort Worth, TX. Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Fuel Properties and Suitability of E. benthamii and E. macarthurii for Torrefied Wood and Pellets. Presented at the International Biomass Conference and Expo, Denver, CO. Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Technical and Economic Modeling for the Production of Torrefied Ligno-Cellulosic Biomass for the U.S. Presented at the International Biomass Conference and Expo, Denver, CO. Saloni, D. (2012). Involvement, Empowerment and Team Building. Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA. Saloni, D. (2012). Lean Manufacturing Implementation Analysis in the Secondary Wood Industry. Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA. Saloni, D., Pirraglia, A., Gonzalez, R., Denig, J., & Wright, J. (2012). Assessment of the most adequate pre-treatments and woody biomasses intended for co-firing in the U.S. Poster presented at the Sungrant National Conference, New Orleans, LA. Albey, E., Bilge, U., & Uzsoy, R. (2012, February). Performance of an Iterative Production Planning Approach for Production Systems with Manufacturing Flexibility. Presented at the Workshop on Production Economics, Innsbruck, Austria. Ivy, J. S., Sengul, I., & Uzsoy, R. (2012, May). Modeling for Equitable Food Distribution Under Capacity Constraints. Presented at the Industrial and Systems Engineering Research Conference, Orlando, FL. Kim, S., & Uzsoy, R. (2012, May). Engineering Process Improvement for Wafer Fabrication. Poster, presented at the 23rd Advanced Semiconductor Manufacturing Conference, Saratoga Springs, NY. Armbruster, D., & Uzsoy, R. (2012). Multiple Time Scales in Production Planning: Clearing Functions, Discrete-Event Simulation and Partial Differential Equations. Tutorials in Operations Research. Aouam, T., & Uzsoy, R. (2012). Chance-Constraint-Based Heuristics for Production Planning in the Face of Stochastic Demand and Workload-Dependent Lead Times. https://doi.org/10.1007/978-0-85729-644-3_8 Hopkins, D. C. (2012). Printable Packaging for High Power, High Temperature Power Module. Presented at the IEEE Applied Power Electronics Conference, Orlando, FL. Hopkins, D. C. (2012). Point Source Thermal Management in Dense Power Modules and Systems. Special session presented at the IEEE Applied Power Electronics Conference, Orlando, FL. Bhat, K. P., Guo, Y.-B., Xu, Y., Baltis, T., Hazelmyer, D. R., & Hopkins, D. C. (2012). Results for an Al/AlN composite 350°C SiC solid-state circuit breaker module. 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 2012 IEEE Applied Power Electronics Conference and Exposition - APEC 2012, Orlando, FL. https://doi.org/10.1109/apec.2012.6166172 Hopkins, D. C., Baltis, T., Pitaress, J. M., & Hazelmyer, D. R. (2012). Extreme Thermal Transient Stress Analysis with Pre-Stress in a Metal Matrix Composite Power Package. Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT), 2012(HITEC), 000361–000372. https://doi.org/10.4071/hitec-2012-tha25 Ke, H., & Hopkins, D. C. (2012). Development of Printed Power Packaging for a High Voltage SiC Module. International Symposium on Microelectronics, 2012(1), 000955–000960. https://doi.org/10.4071/isom-2012-wp55 Basaran, C., Li, S., Hopkins, D. C., & Yao, W. (2012). Mean time to failure of SnAgCuNi solder joints under DC. 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems. Presented at the 2012 13th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). https://doi.org/10.1109/itherm.2012.6231474 Lavin, J. A., King, R. E., Vila-Parrish, A. R., Warsing, D. P., & Ahiska, S. S. (2012). Infinite horizon periodic review perturbed demand model with lead time. 62nd IIE Annual Conference and Expo 2012, 540–547. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900339479&partnerID=MN8TOARS Buch, N., King, R. E., Vila-Parrish, A. R., & Warsing, D. P. (2012). An inventory model with restricted replenishment opportunities and re-estimated demand. 62nd IIE Annual Conference and Expo 2012, 531–539. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900300196&partnerID=MN8TOARS Wang, Y., Warsing, D. P., King, R. E., Vila-Parrish, A., & Sebnem Ahiska, S. (2012). Unreliable supplier selection with fixed costs and order constraints. 62nd IIE Annual Conference and Expo 2012, 280–289. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900342003&partnerID=MN8TOARS Kumar, V., Cormier, D., & Harrysson, O. (2012). Electrical conductivity of hexagonal periodic lattice structures. Virtual and Physical Prototyping, 7(1), 81–90. https://doi.org/10.1080/17452759.2012.668784 Hartman, L., Joines, J. A., Thoney, K. A., & King, R. E. (2012). The effect speed and replenishment flexibility has on overall costs of sourcing apparel products. Journal of the Textile Institute, 103(6), 604–621. https://doi.org/10.1080/00405000.2011.595106 Vila-Parrish, A. R., Ivy, J. S., King, R. E., & Abel, S. R. (2012). Patient-based pharmaceutical inventory management: a two-stage inventory and production model for perishable products with Markovian demand. Health Systems, 1(1), 69–83. https://doi.org/10.1057/hs.2012.2 Carrion, H., Joshi, S., Shirwaiker, R., & Fonash, S. J. (2012). A novel fabrication method for embedding metal structures into polymers for flexible electronics. 62nd IIE Annual Conference and Expo 2012, 3212–3221. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900336522&partnerID=MN8TOARS Tan, Z., & Shirwaiker, R. A. (2012). A review of emerging industrial and systems engineering trends and future directions in biomanufacturing. 62nd IIE Annual Conference and Expo 2012, 2354–2361. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900322032&partnerID=MN8TOARS Kazemi-Tutunchi, G., Wei, C., Shirwaiker, R. A., & Dong, J. (2012). A process engineering perspective of scaffold fabrication methods in regenerative medicine: A review. 62nd IIE Annual Conference and Expo 2012, 3096–3105. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900330276&partnerID=MN8TOARS Zhu, S., So, J.-H., Mays, R., Desai, S., Barnes, W. R., Pourdeyhimi, B., & Dickey, M. D. (2012). Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core. Advanced Functional Materials, 23(18), 2308–2314. https://doi.org/10.1002/adfm.201202405 Liu, Y., Genzer, J., & Dickey, M. D. (2012). Light converts 2D shapes into 3D shapes. SPIE. Jain, D., Morales, D., Dickey, M. D., & Velev, O. (2012). Development of Glucose Sensors Composed of Soft Materials. NC State Undergraduate Research Journal. Khan, M. R., Hayes, G. J., Zhang, S., Dickey, M. D., & Lazzi, G. (2012). A Pressure Responsive Fluidic Microstrip Open Stub Resonator Using a Liquid Metal Alloy. IEEE Microwave and Wireless Components Letters, 22(11), 577–579. https://doi.org/10.1109/lmwc.2012.2223754 Patrick, J. F., Sottos, N. R., & White, S. R. (2012). Microvascular based self-healing polymeric foam. POLYMER, 53(19), 4231–4240. https://doi.org/10.1016/j.polymer.2012.07.021 Dong, H., Esser-Kahn, A. P., Thakre, P. R., Patrick, J. F., Sottos, N. R., White, S. R., & Moore, J. S. (2012). Chemical Treatment of Poly(lactic acid) Fibers to Enhance the Rate of Thermal Depolymerization. ACS APPLIED MATERIALS & INTERFACES, 4(2), 503–509. https://doi.org/10.1021/am2010042 Pirraglia, A., & Saloni, D. E. (2012). Measuring environmental improvements image in companies implementing green manufacturing, by means of a fuzzy logic model for decision-making purposes. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 61(5-8), 703–711. https://doi.org/10.1007/s00170-011-3748-x Richards, A. L., Dickey, M. D., Kennedy, A. S., & Buckner, G. D. (2012). Design and demonstration of a novel micro-Coulter counter utilizing liquid metal electrodes. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 22(11). https://doi.org/10.1088/0960-1317/22/11/115012 Thelen, J., Dickey, M. D., & Ward, T. (2012). A study of the production and reversible stability of EGaIn liquid metal microspheres using flow focusing. LAB ON A CHIP, 12(20), 3961–3967. https://doi.org/10.1039/c2lc40492c Yang, L., Cormier, D., West, H., Harrysson, O., & Knowlson, K. (2012). Non-stochastic Ti-6Al-4V foam structures with negative Poisson's ratio. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558, 579–585. https://doi.org/10.1016/j.msea.2012.08.053 Cumby, B. L., Hayes, G. J., Dickey, M. D., Justice, R. S., Tabor, C. E., & Heikenfeld, J. C. (2012). Reconfigurable liquid metal circuits by Laplace pressure shaping. APPLIED PHYSICS LETTERS, 101(17). https://doi.org/10.1063/1.4764020 Wang, Q., Niu, X., Pei, Q., Dickey, M. D., & Zhao, X. (2012). Electromechanical instabilities of thermoplastics: Theory and in situ observation. APPLIED PHYSICS LETTERS, 101(14). https://doi.org/10.1063/1.4757867 Hayes, G. J., So, J.-H., Qusba, A., Dickey, M. D., & Lazzi, G. (2012). Flexible Liquid Metal Alloy (EGaIn) Microstrip Patch Antenna. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 60(5), 2151–2156. https://doi.org/10.1109/tap.2012.2189698 Yang, L., Harrysson, O., West, H., & Cormier, D. (2012). Compressive properties of Ti-6Al-4V auxetic mesh structures made by electron beam melting. ACTA MATERIALIA, 60(8), 3370–3379. https://doi.org/10.1016/j.actamat.2012.03.015 Carrillo, C. A., Saloni, D., Lucia, L. A., Hubbe, M. A., & Rojas, O. J. (2012). Capillary flooding of wood with microemulsions from Winsor I systems. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 381, 171–179. https://doi.org/10.1016/j.jcis.2012.05.032 Yang, Z., Wysk, R. A., & Joshi, S. (2012). Setup Planning Automation for Six-Axis Wire Electrical Discharge Machining. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 134(2). https://doi.org/10.1115/1.4005801 Pirraglia, A., Gonzalez, R., Saloni, D., Wright, J., & Denig, J. (2012). Fuel properties and suitability of eucalyptus benthamii and eucalyptus macarthurii for torrefied wood and pellets. BioResources, 7(1), 217–235. Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012). Self-folding of polymer sheets using local light absorption. SOFT MATTER, 8(6), 1764–1769. https://doi.org/10.1039/c1sm06564e Kacar, N. B., Irdem, D. F., & Uzsoy, R. (2012). An Experimental Comparison of Production Planning Using Clearing Functions and Iterative Linear Programming-Simulation Algorithms. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 25(1), 104–117. https://doi.org/10.1109/tsm.2011.2176560 So, J.-H., Koo, H.-J., Dickey, M. D., & Velev, O. D. (2012). Ionic Current Rectification in Soft-Matter Diodes with Liquid-Metal Electrodes. ADVANCED FUNCTIONAL MATERIALS, 22(3), 625–631. https://doi.org/10.1002/adfm.201101967 Little, J. P., Horn, T. J., Marcellin-Little, D. J., Harrysson, O. L. A., & West, H. A., II. (2012). Development and validation of a canine radius replica for mechanical testing of orthopedic implants. AMERICAN JOURNAL OF VETERINARY RESEARCH, 73(1), 27–33. https://doi.org/10.2460/ajvr.73.1.27