Center for Additive Manufacturing and Logistics - 2015

Hopkins, D. C. (2015). 3D Packaging for High Density And High Performance GaN-Based Circuits. 2015 IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 2015 IEEE Applied Power Electronics Conference and Exposition (APEC), Charlotte, NC.

Manogharan, G., Wysk, R., Harrysson, O., & Aman, R. (2015). AIMS- a metal additive-hybrid manufacturing system: System architecture and attributes. 43rd North American Manufacturing Research Conference, NAMRC, 43, 273–286.

Velarde, G., Lacoa, U., & Saloni, D. (2015). Design and development of a U.S. logistics model for residential and commercial biomass. Presented at the Sun Grant Regional Conference, Auburn, AL.

Kang, Y., Albey, E., & Uzsoy, R. (2015, August). A Column Generation Approach for MultipleProduct Dynamic Lot Sizing with Congestion. Presented at the International Workshop on Lot Sizing, Haute Etudes Commercial, Montreal, Canada.

Albey, E., & Uzsoy, R. (2015). Lead time modeling in production planning. Presented at the 2015 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2015.7408315

Ziarnetzky, T., Kacar, N. B., Monch, L., & Uzsoy, R. (2015). Simulation-based performance assessment of production planning formulations for semiconductor wafer fabrication. Presented at the 2015 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2015.7408392

Summerville, N., Uzsoy, R., & Gaytán, J. (2015). A random keys genetic algorithm for a bicriterion project selection and scheduling problem. International Journal of Planning and Scheduling, 2(2), 110. https://doi.org/10.1504/ijps.2015.072105

Hopkins, D. C., & Ke, H. (2015). Additive Manufacturing In Power Electronics Packaging. Special session presented at the IEEE Applied Power Electronics Conference, Charlotte, NC.

Hopkins, D. C. (2015, November). 3D Power Electronics Packaging and Additive Manufacturing. Presented at the 3rd IEEE Workshop on Wide Bandgap Power Devices and Applications, Blacksburg, VA.

Hopkins, D. C. (2015, October 20). Additive Manufacturing (a.k.a. 3D Printing) for Designing Power Electronic Systems. Presented at the Manufacturing Conference 2015 (MFGCON), Raleigh, NC.

Morgan, A. J., Hopkins, D. C., & McKeown, M. (2015, May). Physical Rf Circuit Techniques And The Implications On Future Power Module Design. Presented at the International Microelectronics Assembly & Packaging Society, Northeast Symposium.

Lawrence, R., & Hopkins, D. C. (2015, December 12). The Evolution and Future Development of Power Electronics as an Essential Element of Power Generation/Delivery, Energy Efficiency, and Industrial Automation. Presented at the North Carolina IEEE Power Electronic Society (PELS) Chapter Seminar, Raleigh, NC.

Morgan, A., De, A., Ke, H., Zhao, X., Vechalapu, K., Hopkins, D. C., & Bhattacharya, S. (2015). A Robust, Composite Packaging Approach for a High Voltage 6.5kV IGBT and Series Diode. International Symposium on Microelectronics, 2015(1), 000359–000364. https://doi.org/10.4071/isom-2015-wp17

Gocer, F., Ahiska, S. S., & King, R. E. (2015). Analysis of a Downward Substitution Strategy in a Manufacturing/Remanufacturing System. In E. Pinson, F. Valente, & B. Vitoriano (Eds.), Operations Research and Enterprise Systems (pp. 186–198). https://doi.org/10.1007/978-3-319-17509-6_13

Kefeli, A., & Uzsoy, R. (2015). Identifying potential bottlenecks in production systems using dual prices from a mathematical programming model. International Journal of Production Research, 54(7), 2000–2018. https://doi.org/10.1080/00207543.2015.1076182

Manogharan, G., Wysk, R., Harrysson, O., & Aman, R. (2015). AIMS – A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes. Procedia Manufacturing, 1, 273–286. https://doi.org/10.1016/J.PROMFG.2015.09.021

West, H., Harrysson, O., Horn, T., Cormier, D., Aman, R., & Marcellin-Little, D. (2015). Novel Materials and Structures Fabricated by Electron Beam Melting. Microscopy and Microanalysis, 21(S3), 461–462. https://doi.org/10.1017/S1431927615003104

Gergely, R. C. R., Pety, S. J., Krull, B. P., Patrick, J. F., Doan, T. Q., Coppola, A. M., … White, S. R. (2015). Biopolymers: Multidimensional Vascularized Polymers using Degradable Sacrificial Templates (Adv. Funct. Mater. 7/2015). Advanced Functional Materials, 25(7), 1042–1042. https://doi.org/10.1002/ADFM.201570048

Khan, M. R., Trlica, C., & Dickey, M. D. (2015). Microfluidics: Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels (Adv. Funct. Mater. 5/2015). Advanced Functional Materials, 25(5), 654–654. https://doi.org/10.1002/ADFM.201570031

Dreher, R., & Starly, B. (2015). Biofabrication of Multimaterial Three-Dimensional Constructs Embedded With Patterned Alginate Strands Encapsulating PC12 Neural Cell Lines. Journal of Nanotechnology in Engineering and Medicine, 6(2). https://doi.org/10.1115/1.4031173

Sheshadri, P., & Shirwaiker, R. A. (2015). Characterization of material-process-structure interactions in the 3D Bioplotting of Polycaprolactone. 3D Printing and Additive Manufacturing, 2(1), 20–31. https://doi.org/10.1089/3dp.2014.0025

Tan, Z., Ganapathy, A., Orndorff, P. E., & Shirwaiker, R. A. (2015). Effects of cathode design parameters on in vitro antimicrobial efficacy of electrically-activated silver-based iontophoretic system. Journal of Materials Science: Materials in Medicine, 26(1), 1–10. https://doi.org/10.1007/s10856-015-5382-x

Starly, B., & Shirwaiker, R. (2015). 3D Bioprinting Techniques. In 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine (pp. 57–77). https://doi.org/10.1016/B978-0-12-800547-7.00003-5

Narayanan, L. K., Kumar, A., Tan, Z. (G., Bernacki, S., Starly, B., & Shirwaiker, R. A. (2015). Alginate Microspheroid Encapsulation and Delivery of MG-63 Cells Into Polycaprolactone Scaffolds: A New Biofabrication Approach for Tissue Engineering Constructs. Journal of Nanotechnology in Engineering and Medicine, 6(2). https://doi.org/10.1115/1.4031174

Lu, Y., Hu, Q., Lin, Y., Pacardo, D. B., Wang, C., Sun, W., … Gu, Z. (2015). Transformable liquid-metal nanomedicine. Nature Communications, 6(1). https://doi.org/10.1038/ncomms10066

Davis, D., Mailen, R., Genzer, J., & Dickey, M. D. (2015). Self-folding of polymer sheets using microwaves and graphene ink. RSC Advances, 5(108), 89254–89261. https://doi.org/10.1039/c5ra16431a

Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015). Methods to pattern liquid metals. Journal of Materials Chemistry C, 3(16), 3834–3841. https://doi.org/10.1039/c5tc00330j

Liu, Y., Casper, M. D., Gozen, A. O., Desai, S., Klem, E., Lewis, J., … Genzer, J. (2015). Buckled Topography to Enhance Light Absorption in Thin Film Organic Photovoltaics Comprising CuPc/C60 Bilayer Laminates. Zeitschrift Für Physikalische Chemie, 229(7-8). https://doi.org/10.1515/zpch-2014-0592

Parekh, D., Cormier, D., & Dickey, M. (2015, August). Multifunctional Printing: Incorporating Electronics into 3D Parts Made by Additive Manufacturing. Additive Manufacturing, pp. 215–258. https://doi.org/10.1201/b18893-9

Tang, S.-Y., Joshipura, I. D., Lin, Y., Kalantar-Zadeh, K., Mitchell, A., Khoshmanesh, K., & Dickey, M. D. (2015). Liquid-Metal Microdroplets Formed Dynamically with Electrical Control of Size and Rate. Advanced Materials, 28(4), 604–609. https://doi.org/10.1002/adma.201503875

Sas, I., Thoney, K. A., Joines, J. A., King, R. E., & Woolard, R. (2015). Reverse Logistics of US Carpet Recycling (T. C. E. C. T.-M. Choi, Ed.). SUSTAINABLE FASHION SUPPLY CHAIN MANAGEMENT: FROM SOURCING TO RETAILING, Vol. 1, pp. 3–30. https://doi.org/10.1007/978-3-319-12703-3_1

Fang, X., Zhou, R., & Gebraeel, N. (2015). An adaptive functional regression-based prognostic model for applications with missing data. RELIABILITY ENGINEERING & SYSTEM SAFETY, 133, 266–274. https://doi.org/10.1016/j.ress.2014.08.013

Gergely, R. C. R., Pety, S. J., Krull, B. P., Patrick, J. F., Doan, T. Q., Coppola, A. M., … White, S. R. (2015). Multidimensional Vascularized Polymers using Degradable Sacrificial Templates. ADVANCED FUNCTIONAL MATERIALS, 25(7), 1043–1052. https://doi.org/10.1002/adfm.201403670

Deng, J., Zhang, L., Dong, J., & Cohen, P. H. (2015). AFM-based 3D Nanofabrication using Ultrasonic Vibration Assisted Nanomachining. 43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 584–592. https://doi.org/10.1016/j.promfg.2015.09.036

Gocer, F., Ahiska, S. S., & King, R. E. (2015). Analysis of a downward substitution strategy in a manufacturing/remanufacturing system. Operations research and enterprise systems, icores 2014, 509, 186–198.

Lin, Y., Cooper, C., Wang, M., Adams, J. J., Genzer, J., & Dickey, M. D. (2015). Handwritten, Soft Circuit Boards and Antennas Using Liquid Metal Nanoparticles. SMALL, 11(48), 6397–6403. https://doi.org/10.1002/smll.201502692

Sung, W., Huang, A. Q., Baliga, B. J., Ji, I., Ke, H., & Hopkins, D. C. (2015). The first demonstration of symmetric blocking SiC gate turn-off (GTO) thyristor. 2015 IEEE 27th International Symposium on Power Semiconductor Devices & IC's (ISPSD), 257–260. https://doi.org/10.1109/ispsd.2015.7123438

Kumar, A., & Starly, B. (2015). Large scale industrialized cell expansion: producing the critical raw material for biofabrication processes. BIOFABRICATION, 7(4). https://doi.org/10.1088/1758-5090/7/4/044103

Wang, M., Khan, M. R., Trlica, C., Dickey, M., & Adams, J. (2015). Pump-free feedback control of a frequency reconfigurable liquid metal monopole. 2015 ieee international symposium on antennas and propagation & usnc/ursi national radio science meeting, 2223–2224. https://doi.org/10.1109/aps.2015.7305500

Mailen, R. W., Liu, Y., Dickey, M. D., Zikry, M., & Genzer, J. (2015). Modelling of shape memory polymer sheets that self-fold in response to localized heating. SOFT MATTER, 11(39), 7827–7834. https://doi.org/10.1039/c5sm01681a

Kong, X. C., Zhang, L., Dong, J. Y., & Cohen, P. H. (2015). Machining force modeling of vibration-assisted nano-machining process. Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 2. https://doi.org/10.1115/MSEC2015-9423

De, A., Morgan, A., Bhattacharya, S., & Hopkins, D. C. (2015). Design considerations of packaging a high voltage current switch. International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, 2015, vol 3.

Srinivasan, H., Harrysson, O. L. A., & Wysk, R. A. (2015). Automatic part localization in a CNC machine coordinate system by means of 3D scans. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 81(5-8), 1127–1138. https://doi.org/10.1007/s00170-015-7178-z

Tang, S.-Y., Lin, Y., Joshipura, I. D., Khoshmanesh, K., & Dickey, M. D. (2015). Steering liquid metal flow in microchannels using low voltages. LAB ON A CHIP, 15(19), 3905–3911. https://doi.org/10.1039/c5lc00742a

Mohammed, M., Sundaresan, R., & Dickey, M. D. (2015). Self-Running Liquid Metal Drops that Delaminate Metal Films at Record Velocities. ACS APPLIED MATERIALS & INTERFACES, 7(41), 23163–23171. https://doi.org/10.1021/acsami.5b06978

Cumby, B. L., Mast, D. B., Tabor, C. E., Dickey, M. D., & Heikenfeld, J. (2015, October). Robust Pressure-Actuated Liquid Metal Devices Showing Reconfigurable Electromagnetic Effects at GHz Frequencies. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, Vol. 63, pp. 3122–3130. https://doi.org/10.1109/tmtt.2015.2470244

Zhao, J., Nunn, W. T., Lemaire, P. C., Lin, Y., Dickey, M., Oldham, C. J., … al. (2015). Facile Conversion of Hydroxy Double Salts to Metal-Organic Frameworks Using Metal Oxide Particles and Atomic Layer Deposition Thin-Film Templates. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 137(43), 13756–13759. https://doi.org/10.1021/jacs.5b08752

Rose, A. S., Kimbell, J. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., & Buchman, C. A. (2015). Multi-material 3D Models for Temporal Bone Surgical Simulation. ANNALS OF OTOLOGY RHINOLOGY AND LARYNGOLOGY, 124(7), 528–536. https://doi.org/10.1177/0003489415570937

Ahiska, S. S., & King, R. E. (2015). Inventory policy characterisation methodologies for a single-product recoverable manufacturing system. European J. of Industrial Engineering, 9(2), 222. https://doi.org/10.1504/ejie.2015.068652

Rose, A. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., Rawal, R. B., & Iseli, C. E. (2015). Pre-operative simulation of pediatric mastoid surgery with 3D-printed temporal bone models. INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY, 79(5), 740–744. https://doi.org/10.1016/j.ijporl.2015.03.004

Hanson, B. B., Hodgson, T. J., Kay, M. G., King, R. E., & Thoney-Barletta, K. A. (2015). On the economic lot scheduling problem: stock-out prevention and system feasibility. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 53(16), 4903–4916. https://doi.org/10.1080/00207543.2015.1005246

Eaker, C. B., & Dickey, M. D. (2015). Liquid metals as ultra-stretchable, soft, and shape reconfigurable conductors (T. George, A. K. Dutta, & M. S. Islam, Eds.). MICRO- AND NANOTECHNOLOGY SENSORS, SYSTEMS, AND APPLICATIONS VII, Vol. 9467. https://doi.org/10.1117/12.2175988

Kacar, N. B., & Uzsoy, R. (2015). Estimating Clearing Functions for Production Resources Using Simulation Optimization. IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING, 12(2), 539–552. https://doi.org/10.1109/tase.2014.2303316

Shirwaiker, R. A., Springer, B. D., Spangehl, M. J., Garrigues, G. E., Lowenberg, D. W., Garras, D. N., … Pottinger, P. S. (2015). A Clinical Perspective on Musculoskeletal Infection Treatment Strategies and Challenges. JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS, 23, S44–S54. https://doi.org/10.5435/jaaos-d-14-00379

Yang, L., Harrysson, O. A., West, H. A., II, Cormier, D. R., Park, C., & Peters, K. (2015). Low-energy drop weight performance of cellular sandwich panels. RAPID PROTOTYPING JOURNAL, 21(4), 433–442. https://doi.org/10.1108/rpj-08-2013-0083

Wang, M., Trlica, C., Khan, M. R., Dickey, M. D., & Adams, J. J. (2015). A reconfigurable liquid metal antenna driven by electrochemically controlled capillarity. JOURNAL OF APPLIED PHYSICS, 117(19). https://doi.org/10.1063/1.4919605

Khan, M. R., Trlica, C., & Dickey, M. D. (2015). Recapillarity: Electrochemically Controlled Capillary Withdrawal of a Liquid Metal Alloy from Microchannels. ADVANCED FUNCTIONAL MATERIALS, 25(5), 671–678. https://doi.org/10.1002/adfm.201403042

Yang, L., Harrysson, O., West, H., & Cormier, D. (2015). Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 69-70, 475–490. https://doi.org/10.1016/j.ijsolstr.2015.05.005

Albey, E., Norouzi, A., Kempf, K. G., & Uzsoy, R. (2015). Demand Modeling With Forecast Evolution: An Application to Production Planning. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 28(3), 374–384. https://doi.org/10.1109/tsm.2015.2453792

Aouam, T., & Uzsoy, R. (2015). Zero-order production planning models with stochastic demand and workload-dependent lead times. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 53(6), 1661–1679. https://doi.org/10.1080/00207543.2014.935514

Hasib, H., Harrysson, O. L. A., & West, H. A., II. (2015). Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting. JOM, 67(3), 639–646. https://doi.org/10.1007/s11837-015-1307-x

Hunsberger, J., Harrysson, O., Shirwaiker, R., Starly, B., Wysk, R., Cohen, P., … Atala, A. (2015). Manufacturing Road Map for Tissue Engineering and Regenerative Medicine Technologies. STEM CELLS TRANSLATIONAL MEDICINE, 4(2), 130–135. https://doi.org/10.5966/sctm.2014-0254

Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J. (2015). Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V. JOM, 67(3), 597–607. https://doi.org/10.1007/s11837-015-1298-7

Harrysson, O. L. A., Marcellin-Little, D. J., & Horn, T. J. (2015). Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. JOM, 67(3), 647–654. https://doi.org/10.1007/s11837-015-1295-x

Yang, L., Harrysson, O., Cormier, D., West, H., Gong, H., & Stucker, B. (2015). Additive Manufacturing of Metal Cellular Structures: Design and Fabrication. JOM, 67(3), 608–615. https://doi.org/10.1007/s11837-015-1322-y