Center for Additive Manufacturing and Logistics - 1995 Rock, C., & Okazaki, K. (1995). Detailed phase analysis of a 77 at.%Nb-Al system prepared by low-energy ball milling. Nanostructured Materials, 5(6), 643–656. https://doi.org/10.1016/0965-9773(95)00282-J Rock, C., & Okazaki, K. (1995). Grain growth kinetics and thermal stability in a nanocrystalline multiphase mixture prepared by low-energy ball milling. Nanostructured Materials, 5(6), 657–671. https://doi.org/10.1016/0965-9773(95)00278-M Mehta, S. V., & Uzsoy, R. (1995). Predictable Scheduling: An Approach to Reducing the Effects of Uncertainties on Production Schedules. Proceedings of the Fourth Industrial Engineering Research Conference. Presented at the Fourth Industrial Engineering Research Conference, Nashville, TN. Moodie, C. L., Uzsoy, R., & Yih, Y. (Eds.). (1995). Cellular Manufacturing: A Systems Engineering Approach. Taylor and Francis. Ovacik, I. M., & Uzsoy, R. (1995, July). Decomposition Algorithms for Scheduling Complex Job Shops. Presented at the Department of Industrial Engineering, Tsing-Hwa University, Hsinchu, Republic of China. Uzsoy, R. (1995, October). OR/MS Career Opportunities in Engineering Schools. Presented at the INFORMS Doctoral Colloquium, New Orleans, LA. Mehta, S. V., & Uzsoy, R. (1995, June). Robust Predictive Schedules for a Single Machine. Presented at the INFORMS International Meeting, Singapore. Chen, S., Hase, R., Takoudis, C. G., & Uzsoy, R. (1995). Alternative Layouts for Semiconductor Wafer Fabrication Facilities. Proceedings of the NSF Grantees Conference. Presented at the NSF Grantees Conference, La Jolla, CA. Ovacik, I. M., & Uzsoy, R. (1995). Decomposition Methods for Scheduling Large Complex Shops. Proceedings of the Fourth Industrial Engineering Research Conference. Presented at the Fourth Industrial Engineering Research Conference, Nashville, TN. Gary, K., Kempf, K., Smith, S., & Uzsoy, R. (1995). Assessing the Quality of Production Schedules. In W. Scherer & D. Brown (Eds.), Intelligent Scheduling Systems (pp. 148–164). Kluwer Academic Publishing. Uzsoy, R., & Ovacik, I. M. (1995, October). Decomposition Methods for Scheduling Problems. Presented at the INFORMS National Meeting, New Orleans, LA. Demirkol, E., Mehta, S. V., & Uzsoy, R. (1995, October). A Computational Comparison of Shifting Bottleneck Procedures. Presented at the INFORMS National Meeting, New Orleans, LA. Mehta, S. V., & Uzsoy, R. (1995, October). Predictable Scheduling to Reduce the Effects of Disruptions on Production Schedules. Presented at the INFORMS National Meeting, New Orleans, LA. Geiger, C. D., Kempf, K., & Uzsoy, R. (1995, October). A Tabu Search Approach to Scheduling Automated Wet Etch Stations. Presented at the INFORMS National Meeting, New Orleans, LA. Traub, R., Chand, S., & Uzsoy, R. (1995, October). Identification of Forecast Horizons in Single Machine Dynamic Scheduling Problems. Presented at the INFORMS National Meeting, New Orleans, LA. Chand, S., Traub, R., & Uzsoy, R. (1995, October). An Iterative Heuristic for Single Machine Dynamic Total Completion Time Problems. Presented at the INFORMS National Meeting, New Orleans, LA. Demirkol, E., Mehta, S. V., & Uzsoy, R. (1995, December). A Computational Comparison of Shifting Bottleneck Procedures. Presented at the Midwest Manufacturing and Logistics Roundtable, University of Iowa, Iowa City, IA. Ovacik, I. M., & Uzsoy, R. (1995). Decomposition Algorithms for Scheduling Complex Job Shops. Proceedings of the NSF Grantees Conference. Presented at the NSF Grantees Conference, La Jolla, CA. Hase, R., Uzsoy, R., & Takoudis, C. G. (1995). Alternative facility layouts for semiconductor wafer fabrication facilities. Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'. Presented at the Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'. https://doi.org/10.1109/iemt.1995.526191 Demirkol, E., Uzsoy, R., & Ovacik, I. M. (1995). Decomposition algorithms for scheduling semiconductor testing facilities. Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'. Presented at the Seventeenth IEEE/CPMT International Electronics Manufacturing Technology Symposium. 'Manufacturing Technologies - Present and Future'. https://doi.org/10.1109/iemt.1995.526115 Clegg, A. J., Williams, D. J., & Uzsoy, R. (1995). Production planning for companies with remanufacturing capability. Proceedings of the 1995 IEEE International Symposium on Electronics and the Environment ISEE (Cat. No.95CH35718). Presented at the 1995 IEEE International Symposium on Electronics and the Environment ISEE (Cat. No.95CH35718). https://doi.org/10.1109/isee.1995.514973 Chen, S., Hase, R. C., Mordaunt, K., Uzsoy, R. M., & Takoudis, C. G. (1995). Relationships between process fundamentals, facility design, and production control of semiconductor manufacturing systems (A. G. Sabnis & I. J. Raaijmakers, Eds.). https://doi.org/10.1117/12.221317 Gary, K., Uzsoy, R., Smith, S. P., & Kempf, K. (1995). Measuring the Quality of Manufacturing Schedules. https://doi.org/10.1007/978-1-4615-2263-8_6 Ovacik, I. M., & Uzsoy, R. (1995). Rolling horizon procedures for dynamic parallel machine scheduling with sequence-dependent setup times. International Journal of Production Research, 33(11), 3173–3192. https://doi.org/10.1080/00207549508904867 Uzsoy, R. (1995). Scheduling batch processing machines with incompatible job families. International Journal of Production Research, 33(10), 2685–2708. https://doi.org/10.1080/00207549508904839 Ashby, J. R., & Uzsoy, R. (1995). Scheduling and order release in a single-stage production system. Journal of Manufacturing Systems, 14(4), 290–306. https://doi.org/10.1016/0278-6125(95)98881-6 Joines, J. A., King, R. E., & Culbreth, C. T. (1995). A comprehensive review of manufacturing cell design. International Journal of Flexible Automation and Integrated Manufacturing, 3(3-4), 225–264. Wu, P., Fang, S. C., King, R. E., & Nuttle, H. L. W. (1995). Decision surface modeling of apparel retail operations using neural network technology. International Journal of Operations and Quantitative Management, 1, 33–47. Kim, K. S., & King, R. E. (1995). Design of conventional and tandem AGV systems in an object-oriented simulation modeling environment. IE Interfaces, 8(1). Hopkins, D. C. (1995). Assessment of the Power Conversion Thrust Area [Final report]. Lawrence Livermore National Laboratory. Hopkins, D. C. (1995). Cost Estimate for the ARM Electronic Circuit Cards [Final report]. Lawrence Livermore National Laboratory. Sargent, T. A., & Kay, M. G. (1995). Implementation and utilization of a decentralized storage system: Costing model. International Journal of Operations and Production Management, 15(9), 210–219. https://doi.org/10.1108/EUM0000000003958 Janet, J. A., Luo, R. C., & Kay, M. G. (1995). Essential visibility graph: an approach to global motion planning for autonomous mobile robots. Proceedings - IEEE International Conference on Robotics and Automation, 2, 1958–1963. https://doi.org/10.1109/ROBOT.1995.526023 Seifert, R. W., & Kay, M. G. (1995). Evaluation of AGV routing strategies using hierarchical simulation. Winter Simulation Conference Proceedings, 850–856. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029504766&partnerID=MN8TOARS Janet, J. A., Gutierrez-Osuna, R., Kay, M. G., & Luo, R. C. (1995). Autonomous mobile robot self-referencing with sensor windows and neural networks. IECON Proceedings (Industrial Electronics Conference), 2, 1124–1129. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0029541847&partnerID=MN8TOARS King, R. E., & Kim, K. S. (1995). AgvTalk: An object-oriented simulator for AGV systems. Computers & Industrial Engineering, 28(3), 575–592. https://doi.org/10.1016/0360-8352(94)00210-e Wu, P., Fang, S.-C., Nuttle, H. L. W., Wilson, J. R., & King, R. E. (1995). Guided Neural Network Learning Using a Fuzzy Controller, with Applications to Textile Spinning. International Transactions in Operational Research, 2(3), 259–272. https://doi.org/10.1111/j.1475-3995.1995.tb00020.x