Center for Additive Manufacturing and Logistics - 2006

Abdulhamid, M. F., Basaran, C., & Hopkins, D. C. (2006). Experimental Study of Thermomigration in Lead-Free Nanoelectronics Solder Joints. Electronic and Photonic Packaging, Electrical Systems Design and Photonics, and Nanotechnology. Presented at the ASME 2006 International Mechanical Engineering Congress and Exposition. https://doi.org/10.1115/imece2006-13119

Bucci, M. J., & Kay, M. G. (2006). A modified ALA procedure for logistic network designs with scale economies. 2006 IIE Annual Conference and Exhibition.

Dickey, M. D., Collister, E., Raines, A., Tsiartas, P., Holcombe, T., Sreenivasan, S. V., … Willson, C. G. (2006). Photocurable Pillar Arrays Formed via Electrohydrodynamic Instabilities. Chemistry of Materials, 18(8), 2043–2049. https://doi.org/10.1021/cm052592w

Dickey, M. D., Stewart, M. D., & Willson, C. G. (2006). Advanced Lithography. In S. Campbell (Ed.), National Nanotechnology Infrastructure Network (NNIN) Open Textbook.

Evans, P. J., Starly, B., & Sun, W. (2006). Computer Aided Tissue Engineering for the Design and Evaluation of Lumbar-Spine Arthroplasty. Computer-Aided Design and Applications, 3(6), 771–778. https://doi.org/10.1080/16864360.2006.10738430

Geiger, C. D., Uzsoy, R., & Aytuğ, H. (2006). Rapid Modeling and Discovery of Priority Dispatching Rules: An Autonomous Learning Approach. Journal of Scheduling, 9(1), 7–34. https://doi.org/10.1007/s10951-006-5591-8

Hopkins, D. C., Kellerman, D. W., Basaran, C., & Gomez, J. (2006). Aluminum-Based High-Temperature (>200°C) Packaging for SiC Power Converters. Proceedings 2006 International Symposium on Microelectronics : October 8-12, 2006 : San Diego Convention Center, San Diego, Calif., 734–741. Washington, D.C.: IMAPS.

Hopkins, D. C., Kellerman, D. W., Wunderlich, R. A., Basaran, C., & Gomez, J. (2006). High-temperature, high-density packaging of a 60kW converter for >200/spl deg/C embedded operation. Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06. Presented at the Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06., Dallas, TX. https://doi.org/10.1109/apec.2006.1620641

Joines, J. A., Thoney, K. A., King, R. E., & Kay, M. G. (2006). Supply chain multi-objective simulation optimization. 4th International Industrial Simulation Conference 2006, ISC 2006, 377–383.

Okudan, G. E., & Shirwaiker, R. A. (2006). A multi-stage problem formulation for concept selection for improved product design. Portland International Conference on Management of Engineering and Technology, 6, 2528–2538. https://doi.org/10.1109/PICMET.2006.296850

Okudan, G. E., Ogot, M., & Shirwaiker, R. (2006). An investigation on the effectiveness of design ideation using TRIZ. Proceedings of the ASME Design Engineering Technical Conference, 2006.

Pal, L., Joyce, M. K., & Fleming, P. D. (2006). A simple method for calculation of the permeability coefficient of porous media. Tappi Journal, 5(9), 10–16.

Pal., L., & Fleming, P. D., III. (2006). The study of ink pigment dispersion parameters. The Hilltop Review, 2(1), 9, Retrieved from http://scholarworks.wmich.edu/hilltopreview/vol2/iss1/9

Piatt, J. H., Jr., Starly, B., Sun, W., & Faerber, E. (2006). Application of computer-assisted design in craniofacial reconstructive surgery using a commercial image guidance system. Journal of Neurosurgery: Pediatrics, 104(1), 64–67. https://doi.org/10.3171/ped.2006.104.1.64

Shin, D., Wysk, R. A., & Rothrock, L. (2006). A formal control-theoretic model of a human–automation interactive manufacturing system control. International Journal of Production Research, 44(20), 4273–4295. https://doi.org/10.1080/00207540500497074

Shirwaiker, R. A., & Okudan, G. E. (2006). TRIZ and axiomatic design: A review of manufacturing case-studies & their compatibility. Portland International Conference on Management of Engineering and Technology, 6, 2510–2520. https://doi.org/10.1109/PICMET.2006.296848

Starly, B., Lau, W., Bradbury, T., & Sun, W. (2006). Internal architecture design and freeform fabrication of tissue replacement structures. Computer-Aided Design, 38(2), 115–124. https://doi.org/10.1016/j.cad.2005.08.001

Tsiartas, P. C., Dickey, M., Allrich, K. E., & Willson, C. G. (2006). Photocurable pillar arrays formed via AC- and ultrasound-induced electrohydrodynamic instabilities. Proceedings of SPIE-the International Society for Optical Engineering, 6151(2), 61513G/1–61513G/7. https://doi.org/10.1117/12.657442

Warsing, D. P., Helmer, E. A., & Blackhurst, J. V. (2006). Strategic safety stock placement in production networks with supply risk. 2006 IIE Annual Conference and Exhibition.

Ye, H., Basaran, C., & Hopkins, D. C. (2006). Experimental Damage Mechanics of Micro/Power Electronics Solder Joints under                 Electric Current Stresses. International Journal of Damage Mechanics, 15(1), 41–67. https://doi.org/10.1177/1056789506054311