Center for Additive Manufacturing and Logistics - 2007

Hopkins, D. C. (2007). Advanced Power Packaging for High Reliability and Higher Temperatures. 40th International Symposium on Microelectronics. Presented at the 40th International Symposium on Microelectronics, San Jose, CA.

Hopkins, D. C. (2007). Introduction to Power Packaging Techniques. 22nd Annual IEEE Conference on Applied Power Electronics Conference and Exposition (APEC). Presented at the 22nd Annual IEEE Conference on Applied Power Electronics Conference and Exposition (APEC), Anaheim, CA.

Saloni, D., Lemaster, R., & Cardenas, A. (2007). Process monitoring of the abrasive machining process when wood is used. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Nashville, TN.

Barreto, N., Saloni, D., Cardenas, A., Gasparin, H., & Lemaster, R. (2007). Simulation model design as a tool for improving abrasive machining process. Presented at the Institute of Industrial Engineers Solutions Conference. Institute of Industrial Engineers, Nashville, TN.

Saloni, D., & Lemaster, R. (2007). Design and development of a process monitoring and control system for abrasive machining processes. Presented at the International Wood machining Seminar, Vancouver, CA.

Sourirajan, K., Ozsen, L., & Uzsoy, R. (2007, July). Multiproduct Network Design Model with Lead Time and Safety Stock Considerations. Presented at the INFORMS International Meeting, Rio Mar, Puerto Rico.

Orcun, S., Uzsoy, R., & Kempf, K. G. (2007, July). Lead Time Based Heuristics for Integrated Production and Safety Stock Planning. Presented at the INFORMS International Meeting, Rio Mar, Puerto Rico.

Orcun, S., Cetinkaya, S., & Uzsoy, R. (2007). Determining safety stocks in the presence of workload-dependent lead times. Presented at the 2007 Winter Simulation Conference. https://doi.org/10.1109/wsc.2007.4419791

McKay, T., Hopkins, D. C., & Basaran, C. (2007). The effect of layer thickness variation on the thermo-mechanical properties of direct aluminum bonded substrates on AlSiC. Proceedings of the 2007 International Symposium on Microelectronics : November 11-15, 2007, San Jose Convention Center, san Jose, California, USA. Presented at the 40th International Microelectronics and Packaging Society (IMAPS) International Symposium on Microelectronics, San Jose, CA.

Enser, K. E., Hopkins, D. C., & Basaran, C. (2007). Solder Interconnect Electromigration Due to Time Varying Current Stressing. Proceedings of the 2007 International Symposium on Microelectronics : November 11-15, 2007, San Jose Convention Center, San Jose, California, USA, 10. Washington, D.C.: IMAPS.

Enser, K. E., Hopkins, D. C., & Basaran, C. (2007, April 19). A Review of Electromigration Under Time Varying Current Stressing. Presented at the Society of Automotive Engineers (SAE) International Symposium, Toronto, Canada.

Abdulhamid, M. F., Hopkins, D. C., & Basaran, C. (2007). IMC Effects in Solder from High Thermal Gradients Management. Presented at the International Electronics Packaging Symposium, Niskayuna, NY.

McKay, T., Hopkins, D. C., Basaran, C., & Abdulhamid, M. F. (2007). Harsh Environment Thermal Management Using Aluminum-Based Packaging. Presented at the International Electronics Packaging Symposium, Niskayuna, NY.

Hopkins, D. C. (2007). Packaging and Smart Power Systems. In M. H. Rashid (Ed.), Power Electronics Handbook (2nd ed., pp. 1147–1158). https://doi.org/10.1016/b978-012088479-7/50060-2

Pal, L., Agate, S., & Fleming, P. D. (2007). Effects of paper manufacturing factors on inkjet print quality and lightfastness. NIP & Digital Fabrication Conference, 6, 749–754. Springfield, Virginia: Society for Imaging Science and Technology.

Upasani, A., & Uzsoy, R. (2007). Incorporating manufacturing lead times in joint production-marketing models: A review and some future directions. Annals of Operations Research, 161(1), 171–188. https://doi.org/10.1007/s10479-007-0294-x

Altuntas, B., Wysk, R. A., & Rothrock, L. (2007). Formal approach to include a human material handler in a computer-integrated manufacturing (CIM) system. International Journal of Production Research, 45(9), 1953–1971. https://doi.org/10.1080/00207540500031923

Lee, S., Son, Y.-J., & Wysk, R. A. (2007). Simulation-based planning and control: From shop floor to top floor. Journal of Manufacturing Systems, 26(2), 85–98. https://doi.org/10.1016/j.jmsy.2007.07.001

Ling, X., Kay, M. G., & Telford, J. (2007). Public logistics network protocol design and implementation. IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, 1593–1598. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-44949150426&partnerID=MN8TOARS

Bucci, M. J., Kay, M. G., & Warsing, D. P. (2007). A comparison of meta-heuristics for large scale facility location problems with economies of scale. IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, 1410–1415. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-44949149427&partnerID=MN8TOARS

Orcun, S., Asmundsson, J. M., Uzsoy, R., Clement, J. P., Pekny, J. F., & Rardin, R. L. (2007). Supply chain optimisation and protocol environment (SCOPE) for rapid prototyping and analysis of complex supply chains. Production Planning & Control, 18(5), 388–406. https://doi.org/10.1080/09537280701417116

Sourirajan, K., Ozsen, L., & Uzsoy, R. (2007). A single-product network design model with lead time and safety stock considerations. IIE Transactions, 39(5), 411–424. https://doi.org/10.1080/07408170600941631

Malve, S., & Uzsoy, R. (2007). A genetic algorithm for minimizing maximum lateness on parallel identical batch processing machines with dynamic job arrivals and incompatible job families. Computers & Operations Research, 34(10), 3016–3028. https://doi.org/10.1016/j.cor.2005.11.011

Sourirajan, K., & Uzsoy, R. (2007). Hybrid decomposition heuristics for solving large-scale scheduling problems in semiconductor wafer fabrication. Journal of Scheduling, 10(1), 41–65. https://doi.org/10.1007/s10951-006-0325-5

Varma, V. A., Uzsoy, R., Pekny, J., & Blau, G. (2007). Lagrangian heuristics for scheduling new product development projects in the pharmaceutical industry. Journal of Heuristics, 13(5), 403–433. https://doi.org/10.1007/s10732-007-9016-4

Eskigun, E., Uzsoy, R., Preckel, P. V., Beaujon, G., Krishnan, S., & Tew, J. D. (2007). Outbound supply chain network design with mode selection and lead time considerations. Naval Research Logistics, 54(3), 282–300. https://doi.org/10.1002/nav.20205

Starly, B., Yildirim, E., & Sun, W. (2007). A tracer metric numerical model for predicting tortuosity factors in three-dimensional porous tissue scaffolds. Computer Methods and Programs in Biomedicine, 87(1), 21–27. https://doi.org/10.1016/j.cmpb.2007.04.003

Starly, B., & Sun, W. (2007). Internal Scaffold Architecture Designs using Lindenmayer Systems. Computer-Aided Design and Applications, 4(1-4), 395–403. https://doi.org/10.1080/16864360.2007.10738559

Starly, B., & Choubey, A. (2007). Enabling Sensor Technologies for the Quantitative Evaluation of Engineered Tissue. Annals of Biomedical Engineering, 36(1), 30–40. https://doi.org/10.1007/s10439-007-9399-2

Shirwaiker, R. A., & Okudan, G. E. (2007). Using triz and axiomatic design synergistically: A case study. International Journal of Innovation and Technology Management, 4(2), 155–170. https://doi.org/10.1142/S021987700700103X

Dickey, M. D., Raines, A., Collister, E., Bonnecaze, R. T., Sreenivasan, S. V., & Willson, C. G. (2007). High-aspect ratio polymeric pillar arrays formed via electrohydrodynamic patterning. Journal of Materials Science, 43(1), 117–122. https://doi.org/10.1007/s10853-007-2086-8

Lee, S., Carmichael, P., Meiring, J., Dickey, M., Grayson, S., Bonnecaze, R. T., & Wilson, C. G. (2007). Modeling of self-assembly dynamics of photolithographically patterned MUFFINS biosensor arrays. Materials Research Society Symposium Proceedings, 102. https://doi.org/10.1557/proc-1002-n07-08

La Harrysson, O., Hosni, Y. A., & Nayfeh, J. F. (2007). Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data: femoral-component case study. BMC MUSCULOSKELETAL DISORDERS, 8. https://doi.org/10.1186/1471-2474-8-91

Thomas, D. J., & Warsing, D. (2007). A periodic inventory model for stocking modular components. Production and Operations Management, 16(3), 343–359. https://doi.org/10.1111/j.1937-5956.2007.tb00263.x

Liska, W. D., Marcellin-Little, D. J., Eskelinen, E. V., Sidebotham, C. G., Harrysson, O. L. A., & Hielm-Bjorkman, A. K. (2007, June). Custom total knee replacement in a dog with femoral condylar bone loss. VETERINARY SURGERY, Vol. 36, pp. 293–301. https://doi.org/10.1111/j.1532-950X.2007.00270.x

Taner, M. R., Hodgson, T. J., King, R. E., & Schultz, S. R. (2007). Satisfying due-dates in the presence of sequence dependent family setups with a special comedown structure. COMPUTERS & INDUSTRIAL ENGINEERING, 52(1), 57–70. https://doi.org/10.1016/j.cie.2006.10.008