Center for Additive Manufacturing and Logistics - 2011

Velarde, G., Pirraglia, A., van Dyk, H., & Saloni, D. (2011). Lean manufacturing in the U.S. South Atlantic region: An overview of the current state of implementation in the secondary wood industry. International Wood Products Journal, 2(1), 30–37. https://doi.org/10.1179/2042645311Y.0000000006

Pirraglia, A., Velarde, G., & Saloni, D. (2011). Design, Verification and Validation of a Model that Measures Environmental Image in Companies Implementing Green Building, by Means of Fuzzy Logic for Decision-making Purposes. Poster presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Velarde, G. J., Pirraglia, A., & Saloni, D. E. (2011). Logistics and Transportation Analysis and Quantification of Forest Biomass from the U.S. to Europe. A Supply and Demand Interaction. Presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Saloni, D., Pirraglia, A., & Gonzalez, R. (2011). Converting Eucalyptus Biomass into Ethanol. Presented at the IUFRO Working Group 2.08.03: Improvement and Culture of Eucalyptus, Porto Seguro, Brazil.

Saloni, D., & Pirraglia, A. (2011). Global Wood Chip Demand. Presented at the Southern Resources Assessment Consortium Annual Meeting, Durham, NC.

Saloni, D., Pirraglia, A., Gonzalez, R., Wright, J., & Johnson, J. (2011). Cold-Resistant Eucalyptus: characteristics and suitability for solid fuels production. Presented at the Forest Productivity Cooperative Annual Meeting, Raleigh, NC.

Uzsoy, R. (2011, March). Production Planning with Resources Subject to Congestion. Presented at the Department of Computer Science and Industrial Engineering, Arizona State University.

Uzsoy, R. (2011, September). Production Planning with Resources Subject to Congestion. Presented at the Texas A&M University.

Kang, Y., Albey, E., Hwang, S., & Uzsoy, R. (2011, July). Heuristics for Multiproduct Dynamic Lot Sizing with Congestion. Presented at the Department of Industrial Engineering, Bogazici University, Istanbul, Turkey.

Uzsoy, R. (2011, December). Production Planning with Workload-Dependent Lead Times and Uncertain Demand. Presented at the Graduate School of Management, University of California, Davis, California.

Carr, S., Gultekin, M., Roberts, S., & Uzsoy, R. (2011, May). Geography in Healthcare Planning. Presented at the Industrial Engineering Research Conference, Reno, NV.

Yaylali, E., Uzsoy, R., Worth, T., Maillard, J. M., Meyer, A. M., Samoff, E., & Wendelboe, A. (2011, June). Modelling the Effect of Public Health Resources on the Dynamic of Pertussis Outbreaks. Presented at the INFORMS Conference on Healthcare, Montreal, Quebec, Canada.

Kempf, K. G., Keskinocak, P., & Uzsoy, R. (Eds.). (2011). Planning in the Extended Enterprise: A State of the Art Handbook (Vol. 2). New York: Springer.

Albey, E., Bilge, U., & Uzsoy, R. (2011, November). Estimating Clearing Functions for Multistage Production Systems with Alternative Machines. Presented at the INFORMS National Meeting, Charlotte, NC.

Viktorovna, N., Gaytan Iniestra, J., & Uzsoy, R. (2011, November). A New Genetic Algorithm for Multicriteria Project Selection and Scheduling. Presented at the INFORMS National Meeting, Charlotte, NC.

Norouzi, A., & Uzsoy, R. (2011, November). Modeling the Conditional Covariance of Demands with Application to Production Planning. Presented at the INFORMS National Meeting, Charlotte, NC.

Yaylali, E., Ivy, J. S., & Uzsoy, R. (2011, November). Modeling the Effect of Public Health Resources and Alerting on the Dynamics of Pertussis Spread. Presented at the INFORMS National Meeting, Charlotte, NC.

Jarugumilli, K., & Uzsoy, R. (2011, November). A Nonlinear Knapsack Problem Arising in Location Problems with Safety Stocks. Presented at the INFORMS National Meeting, Charlotte, NC.

Kacar, N. B., & Uzsoy, R. (2011, November). Estimating Clearing Functions from Simulation Data. Presented at the INFORMS National Meeting, Charlotte, NC.

Liu, J., Li, C., Yang, F., Wan, H., & Uzsoy, R. (2011). Production planning for semiconductor manufacturing via simulation optimization. Presented at the 2011 Winter Simulation Conference - (WSC 2011). https://doi.org/10.1109/wsc.2011.6148055

Orcun, S., & Uzsoy, R. (2011). The Effects of Production Planning on the Dynamic Behavior of a Simple Supply Chain: An Experimental Study. https://doi.org/10.1007/978-1-4419-8191-2_3

Ravindran, A., Kempf, K. G., & Uzsoy, R. (2011). Production planning with load-dependent lead times and safety stocks for a single product. International Journal of Planning and Scheduling, 1(1/2), 58. https://doi.org/10.1504/ijps.2011.044547

Hopkins, D. C. (2011). Packaging and Smart Power Systems. In M. H. Rashid (Ed.), Power Electronics Handbook (3rd ed., pp. 1275–1286). https://doi.org/10.1016/b978-0-12-382036-5.00044-6

Guo, Y.-B., Bhat, K. P., Aravamudhan, A., Hopkins, D. C., & Hazelmyer, D. R. (2011). High current and thermal transient design of a SiC SSPC for aircraft application. 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 2011 IEEE Applied Power Electronics Conference and Exposition - APEC 2011. https://doi.org/10.1109/apec.2011.5744759

Baltis, T., Hopkins, D. C., Pitaressi, J. M., & Hazelmyer, D. R. (2011). High Thermal-Transient Packaging for a SiC-Based Solid State Circuit Breaker. International Symposium on Microelectronics, 2011(1), 000608–000618. https://doi.org/10.4071/isom-2011-wa5-paper2

Charles, R., Raman, S., & Starly, B. (2011). Sustainment: A Growth Industry for Custom Manufacturing in the United States. Journal of Aviation and Aerospace Perspectives, 1(1), 5–16.

Davies, K., & Starly, B. (2011). Virtual and Real: Using 3D Scanning, Modeling and Printing in Reconstructing a Juvenile Apatosaurus Skeleton. Journal of Vertebrate Paleontology, 31(Supplement 2).

Wang, Y., King, R. E., Ahiska, S. S., & Warsing, D. P. (2011). Optimal ordering policy with multiple unreliable suppliers. 61st Annual IIE Conference and Expo Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900342045&partnerID=MN8TOARS

Kim, N., Joo, J., Rothrock, L., Wysk, R., & Son, Y.-J. (2011). Human Behavioral Simulation Using Affordance-Based Agent Model. In Human-Computer Interaction. Design and Development Approaches (pp. 368–377). https://doi.org/10.1007/978-3-642-21602-2_40

Esser-Kahn, A. P., Thakre, P. R., Dong, H., Patrick, J. F., Vlasko-Vlasov, V. K., Sottos, N. R., … White, S. R. (2011). Hybrid Materials: Three-Dimensional Microvascular Fiber-Reinforced Composites (Adv. Mater. 32/2011). Advanced Materials, 23(32), 3653–3653. https://doi.org/10.1002/adma.201190127

Shashaani, S. (2011). Single-machine batch scheduling minimizing weighted flow times and delivery costs. Applied Mathematical Modelling. https://doi.org/10.1016/j.apm.2010.07.023

Padmanabhan, T., Kamaraj, V., Magwood, L., Jr., & Starly, B. (2011). Experimental investigation on the operating variables of a near-field electrospinning process via response surface methodology. Journal of Manufacturing Processes, 13(2), 104–112. https://doi.org/10.1016/j.jmapro.2011.01.003

Parthasarathy, J., Starly, B., & Raman, S. (2011). A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications. Journal of Manufacturing Processes, 13(2), 160–170. https://doi.org/10.1016/j.jmapro.2011.01.004

Lan, S.-F., & Starly, B. (2011). Alginate based 3D hydrogels as an in vitro co-culture model platform for the toxicity screening of new chemical entities. Toxicology and Applied Pharmacology, 256(1), 62–72. https://doi.org/10.1016/j.taap.2011.07.013

Shirwaiker, R. A., & Okudan, G. E. (2011). Contributions of TRIZ and axiomatic design to leanness in design: An investigation. Procedia Engineering, 9, 730–735. https://doi.org/10.1016/j.proeng.2011.03.162

Yang, Z., Shirwaiker, R. A., & Wysk, R. A. (2011). Optimization of manufacturing operations using a new interactive computer-aided process planning program. 61st Annual IIE Conference and Expo Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900313847&partnerID=MN8TOARS

Shirwaiker, R. A., Voigt, R. C., & Wysk, R. A. (2011). Effects of critical design parameters on antibacterial efficacy of a silver ions-based antibacterial surface system. 61st Annual IIE Conference and Expo Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900320661&partnerID=MN8TOARS

So, J.-H., Koo, H.-J., Dickey, M. D., & Velev, O. D. (2011). Ionic Current Rectification in Soft-Matter Diodes with Liquid-Metal Electrodes. Advanced Functional Materials, 22(3), 625–631. https://doi.org/10.1002/adfm.201101967

Esser-Kahn, A. P., Thakre, P. R., Dong, H. F., Patrick, J. F., Vlasko-Vlasov, V. K., Sottos, N. R., … White, S. R. (2011). Three-dimensional microvascular fiber-reinforced composites. Advanced Materials, 23(32), 3654–3658. https://doi.org/10.1002/adma.201100933

Saloni, D., Buehlmann, U., & Lemaster, R. L. (2011). Tool wear when cutting wood fiber-plastic composite materials. Forest Products Journal, 61(2), 149–154. https://doi.org/10.13073/0015-7473-61.2.149

Arrieche, R., Saloni, D., Dyk, H., & Lemaster, R. L. (2011). Evaluation of the energy balance for the production of briquettes from biomass. Forest Products Journal, 61(4), 302–309. https://doi.org/10.13073/0015-7473-61.4.302

Davis, L. B., King, R., Hodgson, T., & Wei, W. B. (2011). Information sharing in capacity constrained supply chains under lost sales. International Journal of Production Research, 49(24), 7469–7491. https://doi.org/10.1080/00207543.2010.535037

Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., & Saloni, D. (2011). Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios. BioResources, 6(3), 2551–2567.

Chien, C. F., Dauzere-Peres, S., Ehm, H., Fowler, J. W., Jiang, Z. B., Krishnaswamy, S., … Uzsoy, R. (2011). Modelling and analysis of semiconductor manufacturing in a shrinking world: Challenges and successes. European Journal of Industrial Engineering, 5(3), 254–271.

Saloni, D. E., Lemaster, R., & Jackson, S. (2011). Control system evaluation and implementation for the abrasive machining process on wood. BioResources, 6(3), 2763–2775.

Gonzalez, R., Phillips, R., Saloni, D., Jameel, H., Abt, R., Pirraglia, A., & Wright, J. (2011). Biomass to energy in the southern united states: supply chain and delivered cost. BioResources, 6(3), 2954–2976.

Koo, H.-J., So, J.-H., Dickey, M. D., & Velev, O. D. (2011). Towards All-Soft Matter Circuits: Prototypes of Quasi-Liquid Devices with Memristor Characteristics. Advanced Materials, 23(31), 3559–3564. https://doi.org/10.1002/adma.201101257

Fitzwater, K. L., Marcellin-Little, D. J., Harrysson, O., Osborne, J. A., & Poindexter, E. C. (2011). Evaluation of the effect of computed tomography scan protocols and freeform fabrication methods on bone biomodel accuracy. American Journal of Veterinary Research, 72(9), 1178–1185. https://doi.org/10.2460/ajvr.72.9.1178

Dickey, M. (2011). Liquid metals make microelectrodes. Trac-Trends in Analytical Chemistry, 30(4), VII-.

Crist, K., & Uzsoy, R. (2011). Prioritising production and engineering lots in wafer fabrication facilities: A simulation study. International Journal of Production Research, 49(11), 3105–3125. https://doi.org/10.1080/00207541003801259

Yang, Z., Wysk, R. A., & Joshi, S. (2011). Global tangent visibility analysis for polyhedral computer aided design models. Journal of Manufacturing Science and Engineering, 133(3). https://doi.org/10.1115/1.4004141

Kefeli, A., Uzsoy, R., Fathi, Y., & Kay, M. (2011). Using a mathematical programming model to examine the marginal price of capacitated resources. International Journal of Production Economics, 131(1), 383–391. https://doi.org/10.1016/j.ijpe.2010.03.018

Gonzalez, R., Jameel, H., Chang, H. M., Treasure, T., Pirraglia, A., & Saloni, D. (2011). Thermo-mechanical pulping as a pretreatment for agricultural biomass for biochemical conversion. BioResources, 6(2), 1599–1614.

Khan, M. R., Hayes, G. J., So, J.-H., Lazzi, G., & Dickey, M. D. (2011). A frequency shifting liquid metal antenna with pressure responsiveness. Applied Physics Letters, 99(1), 013501. https://doi.org/10.1063/1.3603961

Rothrock, L., Wysk, R., Kim, N., Shin, D., Son, Y. J., & Joo, J. (2011). A modelling formalism for human-machine cooperative systems. International Journal of Production Research, 49(14), 4263–4273. https://doi.org/10.1080/00207543.2010.511637

Godinho, M., & Uzsoy, R. (2011). The effect of shop floor continuous improvement programs on the lot size-cycle time relationship in a multi-product single-machine environment. International Journal of Advanced Manufacturing Technology, 52(5-8), 669–681. https://doi.org/10.1007/s00170-010-2770-8

So, J.-H., & Dickey, M. D. (2011). Inherently aligned microfluidic electrodes composed of liquid metal. Lab on a Chip, 11(5), 905. https://doi.org/10.1039/c0lc00501k

Gonzalez, R., Treasure, T., Wright, J., Saloni, D., Phillips, R., Abt, R., & Jameel, H. (2011). Exploring the potential of Eucalyptus for energy production in the Southern United States: Financial analysis of delivered biomass. Part I. Biomass and Bioenergy, 35(2), 755–766. https://doi.org/10.1016/j.biombioe.2010.10.011

Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., Saloni, D., Abt, R., & Wright, J. (2011). Converting Eucalyptus biomass into ethanol: Financial and sensitivity analysis in a co-current dilute acid process. Part II. Biomass and Bioenergy, 35(2), 767–772. https://doi.org/10.1016/j.biombioe.2010.10.025

Shirwaiker, R. A., Wysk, R. A., Kariyawasam, S., Carrion, H., & Voigt, R. C. (2011). Micro-scale fabrication and characterization of a silver-polymer-based electrically activated antibacterial surface. Biofabrication, 3(1). https://doi.org/10.1088/1758-5082/3/1/015003