Center for Additive Manufacturing and Logistics - 2012

Albey, E., Bilge, U., & Uzsoy, R. (2012, February). Performance of an Iterative Production Planning Approach for Production Systems with Manufacturing Flexibility. Presented at the Workshop on Production Economics, Innsbruck, Austria.

Aouam, T., & Uzsoy, R. (2012). Chance-Constraint-Based Heuristics for Production Planning in the Face of Stochastic Demand and Workload-Dependent Lead Times. https://doi.org/10.1007/978-0-85729-644-3_8

Armbruster, D., & Uzsoy, R. (2012). Multiple Time Scales in Production Planning: Clearing Functions, Discrete-Event Simulation and Partial Differential Equations. Tutorials in Operations Research.

Basaran, C., Li, S., Hopkins, D. C., & Yao, W. (2012). Mean time to failure of SnAgCuNi solder joints under DC. 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems. Presented at the 2012 13th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). https://doi.org/10.1109/itherm.2012.6231474

Bhat, K. P., Guo, Y.-B., Xu, Y., Baltis, T., Hazelmyer, D. R., & Hopkins, D. C. (2012). Results for an Al/AlN composite 350°C SiC solid-state circuit breaker module. 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Presented at the 2012 IEEE Applied Power Electronics Conference and Exposition - APEC 2012, Orlando, FL. https://doi.org/10.1109/apec.2012.6166172

Buch, N., King, R. E., Vila-Parrish, A. R., & Warsing, D. P. (2012). An inventory model with restricted replenishment opportunities and re-estimated demand. 62nd IIE Annual Conference and Expo 2012, 531–539.

Carrion, H., Joshi, S., Shirwaiker, R., & Fonash, S. J. (2012). A novel fabrication method for embedding metal structures into polymers for flexible electronics. 62nd IIE Annual Conference and Expo 2012, 3212–3221.

Hartman, L., Joines, J. A., Thoney, K. A., & King, R. E. (2012). The effect speed and replenishment flexibility has on overall costs of sourcing apparel products. Journal of the Textile Institute, 103(6), 604–621. https://doi.org/10.1080/00405000.2011.595106

Hopkins, D. C. (2012). Point Source Thermal Management in Dense Power Modules and Systems. Special session presented at the IEEE Applied Power Electronics Conference, Orlando, FL.

Hopkins, D. C. (2012). Printable Packaging for High Power, High Temperature Power Module. Presented at the IEEE Applied Power Electronics Conference, Orlando, FL.

Hopkins, D. C., Baltis, T., Pitaress, J. M., & Hazelmyer, D. R. (2012). Extreme Thermal Transient Stress Analysis with Pre-Stress in a Metal Matrix Composite Power Package. Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT), 2012(HITEC), 000361–000372. https://doi.org/10.4071/hitec-2012-tha25

Ivy, J. S., Sengul, I., & Uzsoy, R. (2012, May). Modeling for Equitable Food Distribution Under Capacity Constraints. Presented at the Industrial and Systems Engineering Research Conference, Orlando, FL.

Kazemi-Tutunchi, G., Wei, C., Shirwaiker, R. A., & Dong, J. (2012). A process engineering perspective of scaffold fabrication methods in regenerative medicine: A review. 62nd IIE Annual Conference and Expo 2012, 3096–3105.

Ke, H., & Hopkins, D. C. (2012). Development of Printed Power Packaging for a High Voltage SiC Module. International Symposium on Microelectronics, 2012(1), 000955–000960. https://doi.org/10.4071/isom-2012-wp55

Kim, S., & Uzsoy, R. (2012, May). Engineering Process Improvement for Wafer Fabrication. Poster, presented at the 23rd Advanced Semiconductor Manufacturing Conference, Saratoga Springs, NY.

Kumar, V., Cormier, D., & Harrysson, O. (2012). Electrical conductivity of hexagonal periodic lattice structures. Virtual and Physical Prototyping, 7(1), 81–90. https://doi.org/10.1080/17452759.2012.668784

Lavin, J. A., King, R. E., Vila-Parrish, A. R., Warsing, D. P., & Ahiska, S. S. (2012). Infinite horizon periodic review perturbed demand model with lead time. 62nd IIE Annual Conference and Expo 2012, 540–547.

Tan, Z., & Shirwaiker, R. A. (2012). A review of emerging industrial and systems engineering trends and future directions in biomanufacturing. 62nd IIE Annual Conference and Expo 2012, 2354–2361.

Vila-Parrish, A. R., Ivy, J. S., King, R. E., & Abel, S. R. (2012). Patient-based pharmaceutical inventory management: a two-stage inventory and production model for perishable products with Markovian demand. Health Systems, 1(1), 69–83. https://doi.org/10.1057/hs.2012.2

Wang, Y., Warsing, D. P., King, R. E., Vila-Parrish, A., & Sebnem Ahiska, S. (2012). Unreliable supplier selection with fixed costs and order constraints. 62nd IIE Annual Conference and Expo 2012, 280–289.