Center for Additive Manufacturing and Logistics - 2013 Saloni, D. (2013, May 6). Solid fuels current and future trends. Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV. Lacoa, U., & Saloni, D. (2013, May 6). US opportunities for exporting biomass to Europe. Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV. Velarde, G., & Saloni, D. (2013, May 6). Biomass pretreatment and logistics. Presented at the Wood Education and Resource Center, Princeton, WV. Velarde, G., & Saloni, D. (2013, April). Wood Pellets Market Trends in the U.S. Presented at the South Atlantic Region, International Biomass Conference and Expo, Track 1: Pellets & Densified Biomass, BBI International, Minneapolis, MN. Velarde, G., Saloni, D., & Lemaster, R. (2013, March). Improvement of Housing Conditions by Assessing and Remediating Moisture Problems in Wood Housing Structures. Poster presented at the 8th Annual NC State University Graduate Student Research Symposium, Raleigh, NC. Velarde, G., & Saloni, D. (2013, April). Analyses of Moisture and Volume Reduction as Means to Optimize Biomass Sourcing under the Scenarios of Disperse and Centralized Operations. Poster presented at the International Biomass Conference and Expo, BBI International, Minneapolis, MN. Carrillo, C., Saloni, D., & Rojas, O. (2013). Effect of composition and formulation variables in biomass flooding capacity by o/w microemulsions. Presented at the 245th National Spring Meeting of the American-Chemical-Society (ACS), New Orleans, LA. Saloni, D. (2013, July). Techno-financial analysis of pellet production in the US. Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC. Velarde, G., & Saloni, D. (2013, July). Pellet logistics challenges and opportunities. Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC. Kacar, N. B., Moench, L., & Uzsoy, R. (2013, February). Production Planning using Nonlinear Clearing Functions: A Review of Recent Results. Presented at the SIAM Conference on Computational Science and Engineering, Boston, MA. Albey, E., & Uzsoy, R. (2013, May). Improving Shop Floor Level Performance in a Dynamic Lot Sizing Environment with Congestion. Presented at the Industrial and Systems Engineering Research Conference, San Juan, PR. Kacar, N. B., Monch, L., & Uzsoy, R. (2013, May). Using Clearing Functions for Production Planning in Large-Scale Wafer Fabs. Presented at the Industrial and Systems Engineering Research Conference, San Juan, PR. Lin, P. C., & Uzsoy, R. (2013, May). Minimizing End Effects in Rolling Horizon Algorithms for Production Planning: An Experimental Study. Presented at the Industrial and Systems Engineering Research Conference, San Juan, PR. Norouzi, A., & Uzsoy, R. (2013, May). Production Planning with Load-Dependent Lead Times and Uncertain Demands. Presented at the Industrial and Systems Engineering Research Conference, San Juan, PR. Sengul, I., Ivy, J. S., & Uzsoy, R. (2013, May). Modeling for Equitable Food Distribution in North Carolina. Presented at the Industrial and Systems Engineering Research Conference, San Juan, PR. Kacar, N. B., Monch, L., & Uzsoy, R. (2013). A comparison of production planning formulations with exogenous cycle time estimates using a large-scale wafer fab model. Presented at the 2013 Winter Simulation Conference - (WSC 2013). https://doi.org/10.1109/wsc.2013.6721733 Upasani, A., & Uzsoy, R. (2013). Integrated Production Planning and Pricing Decisions in Congestion-Prone Capacitated Production Systems. https://doi.org/10.1007/978-1-4614-9056-2_3 Kim, S., & Uzsoy, R. (2013). Modeling and Analysis of Integrated Planning of Production and Engineering Process Improvement. IEEE Transactions on Semiconductor Manufacturing, 26(3), 414–422. https://doi.org/10.1109/tsm.2013.2261099 Hopkins, D. C. (2013, March 18). Understanding Impact of New Additive Manufacturing Techniques on Power Electronics Design. Special session presented at the IEEE Applied Power Electronics Conference, Long Beach, California. Ke, H., Xu, Y., & Hopkins, D. C. (2013). Conceptual Development Using 3D Printing Technologies for 8kV SiC Power Module Package. International Symposium on Microelectronics, 2013(1), 000758–000763. https://doi.org/10.4071/isom-2013-wp62 Comparing traditional and fuzzy-set solutions to (Q, r) inventory systems with discrete lead-time distributions. (2013). Journal of Intelligent and Fuzzy Systems, 24(1), 93–104. https://doi.org/10.3233/IFS-2012-0533 Buch, N., King, R. E., Vila-Parrish, A., & Warsing, D. P. (2013). A newsvendor problem with replenishment. IIE Annual Conference and Expo 2013, 3934–3943. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900327424&partnerID=MN8TOARS Ladd, C., So, J.-H., Muth, J., & Dickey, M. D. (2013). Microstructures: 3D Printing of Free Standing Liquid Metal Microstructures (Adv. Mater. 36/2013). Advanced Materials, 25(36), 4953–4953. https://doi.org/10.1002/ADMA.201370225 Tejada, J. J., Diehl, K., Ivy, J. S., Wilson, J. R., King, R. E., Ballan, M. J., … Yankaskas, B. C. (2013). Combined DES/SD simulaton model of breast cancer screening for older women: An overview. Proceedings of the 2013 Winter Simulation Conference - Simulation: Making Decisions in a Complex World, WSC 2013, 41–53. https://doi.org/10.1109/WSC.2013.6721406 Hosking, M., Roberts, S., Uzsoy, R., & Joseph, T. M. (2013). Investigating interventions for increasing colorectal cancer screening: Insights from a simulation model. Socio-Economic Planning Sciences, 47(2), 142–155. https://doi.org/10.1016/j.seps.2012.10.001 Lobo, B. J., Hodgson, T. J., King, R. E., Thoney, K. A., & Wilson, J. R. (2013). Allocating job-shop manpower to minimize Lmax: Optimality criteria, search heuristics, and probabilistic quality metrics. Computers & Operations Research, 40(10), 2569–2584. https://doi.org/10.1016/j.cor.2013.02.008 A Simulation Optimization Approach to Epidemic Forecasting. (2013). PLoS ONE. https://doi.org/10.1371/journal.pone.0067164 Lan, S.-F., Kehinde, T., Zhang, X., Khajotia, S., Schmidtke, D. W., & Starly, B. (2013). Controlled release of metronidazole from composite poly-ε-caprolactone/alginate (PCL/alginate) rings for dental implants. Dental Materials, 29(6), 656–665. https://doi.org/10.1016/j.dental.2013.03.014 Shirwaiker, R. A., Tan, Z., & Cohen, P. H. (2013). Regenerative medicine manufacturing. Industrial Engineer, Vol. 45, pp. 32–37. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84882976891&partnerID=MN8TOARS Tan, Z., Shirwaiker, R., & Orndoff, P. E. (2013). Determining optimal current intensity and duration for electrically activated silver-based prophylactic hip implant prototype design. ASME 2013 Summer Bioengineering Conference, SBC 2013, 1 B. https://doi.org/10.1115/SBC2013-14141 Mineart, K. P., Lin, Y., Desai, S. C., Krishnan, A. S., Spontak, R. J., & Dickey, M. D. (2013). Ultrastretchable, cyclable and recyclable 1- and 2-dimensional conductors based on physically cross-linked thermoplastic elastomer gels. Soft Matter, 9(32), 7695. https://doi.org/10.1039/c3sm51136g Casper, M. D., Gözen, A. Ö., Dickey, M. D., Genzer, J., & Maria, J.-P. (2013). Surface wrinkling by chemical modification of poly(dimethylsiloxane)-based networks during sputtering. Soft Matter, 9(32), 7797. https://doi.org/10.1039/c3sm50966d Hallfors, N., Khan, A., Dickey, M. D., & Taylor, A. M. (2013). Integration of pre-aligned liquid metal electrodes for neural stimulation within a user-friendly microfluidic platform. Lab Chip, 13(4), 522–526. https://doi.org/10.1039/c2lc40954b Ladd, C., & Dickey, M. D. (2013). 3D Printing of Liquid Metals. Circuit Cellar. King, A. J., Patrick, J. F., Sottos, N. R., White, S. R., Huff, G. H., & Bernhard, J. T. (2013). Microfluidically switched frequency-reconfigurable slot antennas. IEEE Antennas and Wireless Propagation Letters, 12, 828–831. https://doi.org/10.1109/lawp.2013.2270940 Velarde, G. J., Pirraglia, A., & Saloni, D. (2013). Capacity, production, and consumption assessment of the U.S. south Atlantic wood pellet industry. BioResources, 8(4), 5908–5924. https://doi.org/10.15376/biores.8.4.5908-5924 Ladd, C., So, J.-H., Muth, J., & Dickey, M. D. (2013). 3D Printing of Free Standing Liquid Metal Microstructures. ADVANCED MATERIALS, 25(36), 5081–5085. https://doi.org/10.1002/adma.201301400 Kacar, N. B., Moench, L., & Uzsoy, R. (2013, November). Planning Wafer Starts using Nonlinear Clearing Functions: A Large-Scale Experiment. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol. 26, pp. 602–612. https://doi.org/10.1109/tsm.2013.2283038 Carrillo, C. A., Saloni, D., & Rojas, O. J. (2013). Evaluation of O/W microemulsions to penetrate the capillary structure of woody biomass: interplay between composition and formulation in green processing. Green Chemistry, 15(12), 3377. https://doi.org/10.1039/c3gc41325j Huang, H.-Y. S., Huang, S., Gettys, T. A., & Harrysson, O. (2013). A biomechanical study of directional mechanical properties of porcine skin tissues. ASME 2013 International Mechanical Engineering Congress & Exposition. Warsing, D. P., Jr., Wangwatcharakul, W., & King, R. E. (2013). Computing optimal base-stock levels for an inventory system with imperfect supply. Computers & Operations Research, 40(11), 2786–2800. https://doi.org/10.1016/j.cor.2013.04.001 Mays, R. L., Dickey, M. D., & Genzer, J. (2013). Microfluidic channels fabricated from poly(vinylmethylsiloxane) networks that resist swelling by organic solvents. LAB ON A CHIP, 13(22), 4317–4320. https://doi.org/10.1039/c3lc50848j Zhang, L., Dong, J., & Cohen, P. H. (2013). Material-Insensitive Feature Depth Control and Machining Force Reduction by Ultrasonic Vibration in AFM-Based Nanomachining. IEEE TRANSACTIONS ON NANOTECHNOLOGY, 12(5), 743–750. https://doi.org/10.1109/tnano.2013.2273272 Palleau, E., Morales, D., Dickey, M. D., & Velev, O. D. (2013). Reversible patterning and actuation of hydrogels by electrically assisted ionoprinting. NATURE COMMUNICATIONS, 4(1). https://doi.org/10.1038/ncomms3257 Ahiska, S. S., Appaji, S. R., King, R. E., & Warsing, D. P., Jr. (2013). A Markov decision process-based policy characterization approach for a stochastic inventory control problem with unreliable sourcing. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 144(2), 485–496. https://doi.org/10.1016/j.ijpe.2013.03.021 Pirraglia, A., Gonzalez, R., Saloni, D., & Denig, J. (2013). Technical and economic assessment for the production of torrefied ligno-cellulosic biomass pellets in the US. ENERGY CONVERSION AND MANAGEMENT, 66, 153–164. https://doi.org/10.1016/j.enconman.2012.09.024 Pirraglia, A., Gonzalez, R., Denig, J., & Saloni, D. (2013). Technical and Economic Modeling for the Production of Torrefied Lignocellulosic Biomass for the U.S. Densified Fuel Industry. BIOENERGY RESEARCH, 6(1), 263–275. https://doi.org/10.1007/s12155-012-9255-6 Mohammed, M. G., & Dickey, M. D. (2013). Strain-controlled diffraction of light from stretchable liquid metal micro-components. SENSORS AND ACTUATORS A-PHYSICAL, 193, 246–250. https://doi.org/10.1016/j.sna.2013.01.031 Palleau, E., Reece, S., Desai, S. C., Smith, M. E., & Dickey, M. D. (2013). Self-Healing Stretchable Wires for Reconfigurable Circuit Wiring and 3D Microfluidics. ADVANCED MATERIALS, 25(11), 1589–1592. https://doi.org/10.1002/adma.201203921 Samberg, M. E., Tan, Z., Monteiro-Riviere, N. A., Orndorff, P. E., & Shirwaiker, R. A. (2013). Biocompatibility analysis of an electrically-activated silver-based antibacterial surface system for medical device applications. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 24(3), 755–760. https://doi.org/10.1007/s10856-012-4838-5 Medina, L. A., Kremer, G. E. O., & Wysk, R. A. (2013). Supporting medical device development: a standard product design process model. JOURNAL OF ENGINEERING DESIGN, 24(2), 83–119. https://doi.org/10.1080/09544828.2012.676635 Shirwaiker, R. A., Samberg, M. E., Cohen, P. H., Wysk, R. A., & Monteiro-Riviere, N. A. (2013). [Review of Nanomaterials and synergistic low-intensity direct current (LIDC) stimulation technology for orthopedic implantable medical devices]. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY, 5(3), 191–204. https://doi.org/10.1002/wnan.1201 Joo, J., Kim, N., Wysk, R. A., Rothrock, L., Son, Y.-J., Oh, Y.-gwang, & Lee, S. (2013). Agent-based simulation of affordance-based human behaviors in emergency evacuation. SIMULATION MODELLING PRACTICE AND THEORY, 32, 99–115. https://doi.org/10.1016/j.simpat.2012.12.007 Zhu, S., So, J.-H., Mays, R., Desai, S., Barnes, W. R., Pourdeyhimi, B., & Dickey, M. D. (2013). Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core. ADVANCED FUNCTIONAL MATERIALS, 23(18), 2308–2314. https://doi.org/10.1002/adfm.201202405 Mays, R. L., Pourhossein, P., Savithri, D., Genzer, J., Chiechi, R. C., & Dickey, M. D. (2013). Thiol-containing polymeric embedding materials for nanoskiving. JOURNAL OF MATERIALS CHEMISTRY C, 1(1), 121–130. https://doi.org/10.1039/c2tc00030j Bhat, K. P., Oh, K. W., & Hopkins, D. C. (2013). Feasibility of a MEMS Sensor for Gas Detection in HV Oil-Insulated Transformer. IEEE Transactions on Industry Applications, 49(1), 316–321. https://doi.org/10.1109/tia.2012.2229681 Yang, L., Harrysson, O., West, H., & Cormier, D. (2013). Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure. JOURNAL OF MATERIALS SCIENCE, 48(4), 1413–1422. https://doi.org/10.1007/s10853-012-6892-2 Godinho Filho, M., & Uzsoy, R. (2013). The impact of simultaneous continuous improvement in setup time and repair time on manufacturing cycle times under uncertain conditions. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 51(2), 447–464. https://doi.org/10.1080/00207543.2011.652261 Wu, X. M., & Warsing, D. P. (2013). Comparing traditional and fuzzy-set solutions to (Q, r) inventory systems with discrete lead-time distributions. Journal of Intelligent & Fuzzy Systems, 24(1), 93–104. Lobo, B. J., Hodgson, T. J., King, R. E., Thoney, K. A., & Wilson, J. R. (2013). An effective lower bound on L-max in a worker-constrained job shop. COMPUTERS & OPERATIONS RESEARCH, 40(1), 328–343. https://doi.org/10.1016/j.cor.2012.07.003