Center for Additive Manufacturing and Logistics - 2016

Manda, A. B., Uzsoy, R., Kempf, K. G., & Kim, S. (2016, November). Modelling the Impact of New Product Introductions on Factory Throughput. Presented at the INFORMS National Meeting, Nashville, TN.

Gopalswamy, K., & Uzsoy, R. (2016, November). Estimating Clearing Functions using Generalized Regression. Presented at the INFORMS National Meeting, Nashville, TN.

Sengul Orgut, I., Ivy, J. S., & Uzsoy, R. (2016, November). Modeling the Equitable and Effective Distribution of Food Donations under Stochastic Capacities. Presented at the INFORMS National Meeting, Nashville, TN.

Fowler, J. W., Monch, L., & Uzsoy, R. (2016, February). Modeling and Analysis of Semiconductor Supply Chains. Presented at the Workshop on Modeling the Semiconductor Supply Chain, Schloss Dagstuhl, Germany.

Uzsoy, R. (2016, February). Demand Modeling with Forecast Evolution: An Application to Production Planning. Presented at the Fernuniversitat Hagen, Hagen, Germany & University of Wisconsin-Madison.

Arts, J., Albey, E., Uzsoy, R., de Kok, A. G., & Orcun, S. (2016, November). Solving Stochastic Inventory Problems by Integer Programming. Presented at the INFORMS National Meeting, Nashville, TN.

Wollmann, R. G., de Sampaio, R., & Uzsoy, R. (2016, November). A Systematic Literature Review of Rolling Methods for Production Planning. Presented at the INFORMS National Meeting, Nashville, TN.

Kacar, N. B., & Uzsoy, R. (2016, November). Estimating Clearing Functions for Production Resources using Simulation Optimization. Presented at the INFORMS National Meeting, Nashville, TN.

Albey, E., Uzsoy, R., & Kempf, K. G. (2016, November). A Lagrangian Relaxation Approach for a Multiproduct Stochastic Production Planning Problem. Presented at the INFORMS National Meeting, Nashville, TN.

Bansal, A., Uzsoy, R., & Kempf K., G. (2016, November). A Lagrangian Approach for Coordinating Capacity Negotiations in a Semiconductor Firm. Presented at the INFORMS National Meeting, Nashville, TN.

Hopkins, D. C. (2016). Additive Manufacturing – 3D Printing of Electronic Energy Systems and Beyond. Presented at the RTP CFO Forum.

Hopkins, D. C. (2016). Misconception of Thermal Spreading Angle and Misapplication to PCB & Power Modules. Seminar presented at the Carolina PCB, McKimmon Center, Raleigh, NC.

Xu, Y., & Hopkins, D. C. (2016). Application of 3D Printing for Rapid Prototyping of Advanced Power Electronic Modules. Presented at the International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM 2016), Raleigh, NC.

Hopkins, D. C., Xu, Y., Ke, H., & Morgan, A. (2016). A New Power Module Design Resource – Laboratory for Packaging Research in Electronic Energy Systems (PREES). Poster presented at the Electronics Packaging Symp & Heterogeneous Integration Workshop, Binghamton, NY.

Zhao, X., Gao, B., & Hopkins, D. C. (2016). Characterization of Ultra-Thin Flexible Ceramics for High-Density, 3D-Stackable Substrates for Wearable Power Electronics. Presented at the Electronics Packaging Symposium & Heterogeneous Integration Workshop, Binghamton, NY.

Zhao, X., Ke, H., Jiang, Y., Morgan, A., Xu, Y., & Hopkins, D. C. (2016, October 10). Ultra Low Leakage Module for 12kV-225 ̊C SiC Semiconductor Testing. Presented at the 49th International Symposium on Microelectronics, Pasadena, CA.

Zhao, X., Ke, H., Jiang, Y., Morgan, A., Xu, Y., & Hopkins, D. C. (2016). A High Performance Power Module with >10kV capability to Characterize and Test In Situ SiC Devices at >200°C Ambient. Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT), 2016(HiTEC), 000149–000158. https://doi.org/10.4071/2016-hitec-149

Zhao, X., Xu, Y., & Hopkins, D. C. (2016). Advanced multi-physics simulation for high performance power electronic packaging design. 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). Presented at the 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). https://doi.org/10.1109/3dpeim.2016.8048203

Gao, B., & Hopkins, D. C. (2016). A folded GaN VRM with high electrical and thermal performance. 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). Presented at the 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). https://doi.org/10.1109/3dpeim.2016.7570564

Zhao, X., Jagannadham, K., Reainthippayasakul, W., Lanagan, M. T., & Hopkins, D. C. (2016). Thermal and Electrical Characterizations of Ultra-Thin Flexible 3YSZ Ceramic for Electronic Packaging Applications. International Symposium on Microelectronics, 2016(1), 000391–000396. https://doi.org/10.4071/isom-2016-tha13

Hussein, J., Hodgson, T. J., King, R. E., Jackson, S. D., & Thoney Barletta, K. A. (2016). Forecasting communications technology products with leading economic indicators. Journal of Business Forecasting, 35(3), 21–23, 26–27.

Ravi Ravindran, A., & Warsing, D. P. (2016). Supply chain engineering: Models and applications. In Supply Chain Engineering: Models and Applications (pp. 1–548). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85020077399&partnerID=MN8TOARS

Algardh, J. K., Horn, T., West, H., Aman, R., Snis, A., Engqvist, H., … Harrysson, O. (2016). Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM) ®. Additive Manufacturing, 12, 45–50. https://doi.org/10.1016/J.ADDMA.2016.06.009

Mohammed, M., Sundaresan, R., & Dickey, M. D. (2016). Correction to “Self-Running Liquid Metal Drops that Delaminate Metal Films at Record Velocities.” ACS Applied Materials & Interfaces, 8(24), 15855–15855. https://doi.org/10.1021/ACSAMI.6B05828

ASTRO-DF: Adaptive sampling trust-region optimization algorithms, heuristics, and numerical experience. (2016). 2016 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2016.7822121

Dickey, M. D. (2016). Liquid Metals for Soft and Stretchable Electronics. Stretchable Bioelectronics for Medical Devices and Systems, pp. 3–30. https://doi.org/10.1007/978-3-319-28694-5_1

Dickey, M. D. (2016). 4D Biomimetic Printing. News & Views, Nature Materials.

Parekh, D. P., Ladd, C., Panich, L., Moussa, K., & Dickey, M. D. (2016). 3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels. Lab on a Chip, 16(10), 1812–1820. https://doi.org/10.1039/c6lc00198j

Lin, Y., Ladd, C., Wang, S., Martin, A., Genzer, J., Khan, S. A., & Dickey, M. D. (2016). Drawing liquid metal wires at room temperature. Extreme Mechanics Letters, 7, 55–63. https://doi.org/10.1016/j.eml.2016.03.010

Khan, M. R., Bell, J., & Dickey, M. D. (2016). Localized Instabilities of Liquid Metal Films via In-Plane Recapillarity. Advanced Materials Interfaces, 3(23), 1600546. https://doi.org/10.1002/admi.201600546

Yasar, O., & Starly, B. (2016). Fabrication of Lindenmayer System-Based Designed Engineered Scaffolds Using UV-Maskless Photolithography. MRS ADVANCES, 1(11), 749–754. https://doi.org/10.1557/adv.2016.223

Shen, J. Y., Aiken, M., Ladd, C., Dickey, M., & Ricketts, D. S. (2016). A simple electroless plating solution for 3D printed microwave components. 2016 asia-pacific microwave conference (apmc2016). https://doi.org/10.1109/apmc.2016.7931434

Eaker, C. B., Khan, M. R., & Dickey, M. D. (2016). A Method to Manipulate Surface Tension of a Liquid Metal via Surface Oxidation and Reduction. JOVE-JOURNAL OF VISUALIZED EXPERIMENTS, 1(107). https://doi.org/10.3791/53567

Latif, T., Gong, F. Y., Dickey, M., Sichitiu, M. L., & Bozkurt, A. (2016). Using liquid metal alloy (EGaIn) to electrochemically enhance SS stimulation electrodes for biobotic applications. 2016 38th annual international conference of the ieee engineering in medicine and biology society (embc), 2141–2144. https://doi.org/10.1109/embc.2016.7591152

Xu, Y., Husain, I., West, H., Yu, W. S., & Hopkins, D. C. (2016). Development of an ultra-high density power chip on bus (PCoB) module. 2016 ieee energy conversion congress and exposition (ecce). https://doi.org/10.1109/ecce.2016.7855040

Rahman, D., Morgans, A. J., Xu, Y., Gao, R., Yu, W. S., Hopkins, D. C., & Husain, I. (2016). Design methodology for a planarized high power density EV/HEV traction drive using SiC power modules. 2016 ieee energy conversion congress and exposition (ecce). https://doi.org/10.1109/ecce.2016.7855018

Shouche, S., Wysk, R. A., King, R., & Harrysson, O. L. A. (2016). Supply chain operations reference model for us based powder bed metal additive manufacturing processes. 2016 winter simulation conference (wsc), 1158–1169. https://doi.org/10.1109/wsc.2016.7822173

Manda, A. B., Uzsoy, R., Kempf, K. G., & Kim, S. (2016). Modeling the impact of new product introduction on the output of semiconductor wafer fabrication facilities. 2016 winter simulation conference (wsc), 2547–2558.

Seminelli, M. D., Wilson, J. W., & McConnell, B. M. (2016). IMPLEMENTING DISCRETE EVENT SIMULATION TO IMPROVE OPTOMETRY CLINIC OPERATIONS. Winter Simulation Conference, 2157–2168. https://doi.org/10.1109/wsc.2016.7822258

Albey, E., Uzsoy, R., & Kempf, K. G. (2016). A chance constraint based multi-item production planning model using simulation optimization. 2016 winter simulation conference (wsc), 2719–2730.

Krull, B., Patrick, J., Hart, K., White, S., & Sottos, N. (2016). Automatic Optical Crack Tracking for Double Cantilever Beam Specimens. EXPERIMENTAL TECHNIQUES, 40(3), 937–945. https://doi.org/10.1007/s40799-016-0094-9

Deng, J., Zhang, L., Dong, J., & Cohen, P. H. (2016). AFM-based 3D nanofabrication using ultrasonic vibration assisted nanomachining. JOURNAL OF MANUFACTURING PROCESSES, 24, 195–202. https://doi.org/10.1016/j.jmapro.2016.09.003

Krull, B. P., Gergely, R. C. R., Cruz, W. A. S., Fedonina, Y. I., Patrick, J. F., White, S. R., & Sottos, N. R. (2016). Strategies for Volumetric Recovery of Large Scale Damage in Polymers. ADVANCED FUNCTIONAL MATERIALS, 26(25), 4561–4569. https://doi.org/10.1002/adfm.201600486

Kong, X., Cohen, P. H., & Dong, J. (2016, October). Predictive modeling of feature dimension for tip-based nano machining process. JOURNAL OF MANUFACTURING PROCESSES, Vol. 24, pp. 338–345. https://doi.org/10.1016/j.jmapro.2016.06.013

Yaylali, E., Ivy, J. S., Uzsoy, R., Samoff, E., Meyer, A. M., & Maillard, J. M. (2016). Modeling the effect of public health resources and alerting on the dynamics of pertussis spread. HEALTH SYSTEMS, 5(2), 81–97. https://doi.org/10.1057/hs.2015.6

Kesercioglu, M. G., Roberts, S. D., & Uzsoy, R. (2016). Computing the number of acute-care beds within NC Certificate of Need. HEALTH SYSTEMS, 5(2), 98–108. https://doi.org/10.1057/hs.2015.8

Castillo, G. A., Wilson, L., Efimenko, K., Dickey, M. D., Gorman, C. B., & Genzer, J. (2016). Amidation of Polyesters Is Slow in Nonaqueous Solvents: Efficient Amidation of Poly(ethylene terephthalate) with 3-Aminopropyltriethoxysilane in Water for Generating Multifunctional Surfaces. ACS APPLIED MATERIALS & INTERFACES, 8(51), 35641–35649. https://doi.org/10.1021/acsami.6b12155

Patrick, J. F., Robb, M. J., Sottos, N. R., Moore, J. S., & White, S. R. (2016). [Review of Polymers with autonomous life-cycle control]. NATURE, 540(7633), 363–370. https://doi.org/10.1038/nature21002

De, A., Morgan, A., Iyer, V. M., Ke, H., Zhao, X., Vechalapu, K., … Hopkins, D. C. (2016). Design, package, and hardware verification of a high voltage current switch. Apec 2016 31st annual ieee applied power electronics conference and exposition, 295–302. https://doi.org/10.1109/apec.2016.7467887

Morgan, A. J., Xu, Y., Hopkins, D. C., Husain, I., & Yu, W. S. (2016). Decomposition and electro-physical model creation of the CREE 1200V, 50A 3-Ph SiC module. Apec 2016 31st annual ieee applied power electronics conference and exposition, 2141–2146. https://doi.org/10.1109/apec.2016.7468163

Uzsoy, R. (2016). (Almost) present at the creation: 25 years of modelling and simulation in semiconductor manufacturing. 2016 10th european conference on antennas and propagation (eucap), 2509–2509.

Balaguer, M. A. de L., Ramos-Pezzotti, M., Rahhal, M. B., Melvin, C. E., Johannes, E., Horn, T. J., & Sozzani, R. (2016). Multi-sample Arabidopsis Growth and Imaging Chamber (MAGIC) for long term imaging in the ZEISS Lightsheet Z.1. DEVELOPMENTAL BIOLOGY, 419(1), 19–25. https://doi.org/10.1016/j.ydbio.2016.05.029

Morales, D., Stoute, N. A., Yu, Z., Aspnes, D. E., & Dickey, M. D. (2016). Liquid gallium and the eutectic gallium indium (EGaIn) alloy: Dielectric functions from 1.24 to 3.1 eV by electrochemical reduction of surface oxides. APPLIED PHYSICS LETTERS, 109(9). https://doi.org/10.1063/1.4961910

Fanti, M. P., Ukovich, W., & Uzsoy, R. (2016). Special section on emerging advances in logistics systems: Integrating remote sensing, IT, and autonomy. IEEE Transactions on Automation Science and Engineering, 13(4), 1420–1421.

Kumar, A., & Starly, B. (2016). Modeling human mesenchymal stem cell expansion in vertical wheel bioreactors using lactate production rate in regenerative medicine biomanufacturing. Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 2. https://doi.org/10.1115/msec2016-8787

Pamukoff, D. N., Pietrosimone, B., Lewek, M. D., Ryan, E. D., Weinhold, P. S., Lee, D. R., & Blackburn, J. T. (2016). Immediate effect of vibratory stimuli on quadriceps function in healthy adults. MUSCLE & NERVE, 54(3), 469–478. https://doi.org/10.1002/mus.25081

Deng, J., Dong, J., & Cohen, P. (2016). High Rate 3D Nanofabrication by AFM-Based Ultrasonic Vibration Assisted Nanomachining. 44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1283–1294. https://doi.org/10.1016/j.promfg.2016.08.100

Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016). 3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells. ACS BIOMATERIALS SCIENCE & ENGINEERING, 2(10), 1732–1742. https://doi.org/10.1021/acsbiomaterials.6b00196

Neumann, T. V., & Dickey, M. D. (2016). Recent Applications of Liquid Metals Featuring Nanoscale Surface Oxides. SENSING AND ANALYSIS TECHNOLOGIES FOR BIOMEDICAL AND COGNITIVE APPLICATIONS 2016, Vol. 9871. https://doi.org/10.1117/12.2229255

Pamukoff, D. N., Pietrosimone, B., Lewek, M. D., Ryan, E. D., Weinhold, P. S., Lee, D. R., & Blackburn, J. T. (2016). Whole-Body and Local Muscle Vibration Immediately Improve Quadriceps Function in Individuals With Anterior Cruciate Ligament Reconstruction. ARCHIVES OF PHYSICAL MEDICINE AND REHABILITATION, 97(7), 1121–1129. https://doi.org/10.1016/j.apmr.2016.01.021

Eaker, C. B., & Dickey, M. D. (2016). [Review of Liquid metal actuation by electrical control of interfacial tension]. APPLIED PHYSICS REVIEWS, 3(3). https://doi.org/10.1063/1.4959898

Morales, D., Podolsky, I., Mailen, R. W., Shay, T., Dickey, M. D., & Velev, O. D. (2016). Ionoprinted Multi-Responsive Hydrogel Actuators. MICROMACHINES, 7(6). https://doi.org/10.3390/mi7060098

Xu, Y., & Hopkins, D. (2016). FEA-based thermal-mechanical optimization for DBC based power modules. 2016 International Symposium on 3d Power Electronics Integration and Manufacturing (3d-PEIM).

Kacar, N. B., Monch, L., & Uzsoy, R. (2016). Modeling cycle times in production planning models for wafer fabrication. IEEE Transactions on Semiconductor Manufacturing, 29(2), 153–167. https://doi.org/10.1109/tsm.2016.2546314

Cavanaugh, D. L., Tan, Z., Norris, J. P., Hardee, A., Weinhold, P. S., Dahners, L. E., … Shirwaiker, R. A. (2016). Evaluation of silver-titanium implants activated by low intensity direct current for orthopedic infection control: An in vitro and in vivo study. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 104(5), 1023–1031. https://doi.org/10.1002/jbm.b.33451

Lin, P.-C., & Uzsoy, R. (2016). Chance-constrained formulations in rolling horizon production planning: an experimental study. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 54(13), 3927–3942. https://doi.org/10.1080/00207543.2016.1165356

Tan, Z., Xu, G., Orndorff, P. E., & Shirwaiker, R. A. (2016). Effects of Electrically Activated Silver-Titanium Implant System Design Parameters on Time-Kill Curves Against Staphylococcus aureus. JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 36(3), 325–333. https://doi.org/10.1007/s40846-016-0136-x

Morales, D., Bharti, B., Dickey, M. D., & Velev, O. D. (2016). Bending of Responsive Hydrogel Sheets Guided by Field-Assembled Microparticle Endoskeleton Structures. SMALL, 12(17), 2283–2290. https://doi.org/10.1002/smll.201600037

Dickey, M. D. (2016, April). Shaped after print. NATURE MATERIALS, Vol. 15, pp. 379–380. https://doi.org/10.1038/nmat4608

Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016, May). Overview of Materials Qualification Needs for Metal Additive Manufacturing (vol 68, pg 747, 2016). JOM, Vol. 68, pp. 1492–1492. https://doi.org/10.1007/s11837-016-1901-6

Orgut, I. S., Ivy, J., Uzsoy, R., & Wilson, J. R. (2016). Modeling for the equitable and effective distribution of donated food under capacity constraints. IIE TRANSACTIONS, 48(3), 252–266. https://doi.org/10.1080/0740817x.2015.1063792

Smith, E. J., Marcellin-Little, D. J., Harrysson, O. L. A., & Griffith, E. H. (2016). Influence of chondrodystrophy and brachycephaly on geometry of the humerus in dogs. VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY, 29(3), 220–226. https://doi.org/10.3415/vcot-15-11-0181

Johnson, C., Sheshadri, P., Ketchum, J. M., Narayanan, L. K., Weinberger, P. M., & Shirwaiker, R. A. (2016). In vitro characterization of design and compressive properties of 3D-biofabricated/decellularized hybrid grafts for tracheal tissue engineering. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 59, 572–585. https://doi.org/10.1016/j.jmbbm.2016.03.024

Mishra, S. R., Dickey, M. D., Velev, O. D., & Tracy, J. B. (2016). Selective and directional actuation of elastomer films using chained magnetic nanoparticles. NANOSCALE, 8(3), 1309–1313. https://doi.org/10.1039/c5nr07410j

Liu, Y., Genzer, J., & Dickey, M. D. (2016). [Review of "2D or not 2D": Shape-programming polymer sheets]. PROGRESS IN POLYMER SCIENCE, 52, 79–106. https://doi.org/10.1016/j.progpolymsci.2015.09.001

Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM, 68(3), 747–764. https://doi.org/10.1007/s11837-015-1810-0

Manogharan, G., Wysk, R. A., & Harrysson, O. L. A. (2016). Additive manufacturing-integrated hybrid manufacturing and subtractive processes: economic model and analysis. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 29(5), 473–488. https://doi.org/10.1080/0951192x.2015.1067920

Davis, D., Chen, B., Dickey, M. D., & Genzer, J. (2016). Self-Folding of Thick Polymer Sheets Using Gradients of Heat. JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 8(3). https://doi.org/10.1115/1.4032209

Kang, S. H., & Dickey, M. D. (2016). Patterning via self-organization and self-folding: Beyond conventional lithography. MRS BULLETIN, 41(2), 93–98. https://doi.org/10.1557/mrs.2016.3

Tang, S.-Y., Joshipura, I. D., Lin, Y., Kalantar-Zadeh, K., Mitchell, A., Khoshmanesh, K., & Dickey, M. D. (2016). Liquid-Metal Microdroplets Formed Dynamically with Electrical Control of Size and Rate. ADVANCED MATERIALS, 28(4), 604–609. https://doi.org/10.1002/adma.201503875

Orgut, I. S., Brock, L. G., Davis, L. B., Ivy, J. S., Jiang, S., Morgan, S. D., … Middleton, E. (2016). Achieving equity, effectiveness, and efficiency in food bank operations: Strategies for feeding America with implications for global hunger relief. Advances in Managing Humanitarian Operations, 235, 229–256.

Li, M., Yang, F., Uzsoy, R., & Xu, J. (2016). A metamodel-based Monte Carlo simulation approach for responsive production planning of manufacturing systems. JOURNAL OF MANUFACTURING SYSTEMS, 38, 114–133. https://doi.org/10.1016/j.jmsy.2015.11.004

Lin, P. C., & Uzsoy, R. (2016). Estimating the costs of planned changes implied by freezing production plans. Heuristics, Metaheuristics and Approximate Methods in Planning and Scheduling, 236, 17–44.