Center for Additive Manufacturing and Logistics - 2017

Velarde, G., Saloni, D., & Kamke, F. (2017, October 23). Understanding the Machinability of MDF and HDF. Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Saloni, D., Díaz, A., Fajardo, E., Cante, B., & Velarde, G. (2017). Management system based on the measurement of temperature and humidity with prediction calculation of the durability of materials in the crawlspace of houses in the southern region of the USA. Tekhné, 20(2), 081–096.

Saloni, D., Salas, C., & Velarde, G. (2017). Novel Adhesives from Soybean proteins and biopolymer blends. Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Lacoa, U., Velarde, G., Kay, M., Blanco, E., & Saloni, D. E. (2017). Design and Development of Logistics Models for Residential and Commercial Biomass Pellets for Heat and Power Generation in the U.S. BioResources, 12(1). https://doi.org/10.15376/biores.12.1.1506-1531

Gopalswamy, K., & Uzsoy, R. (2017). An iterative refinement approach to fitting clearing functions to data from simulation models of production systems. Presented at the 2017 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2017.8248043

Lease-Oriented Opportunistic Maintenance for Multi-Unit Leased Systems under Product- Service Paradigm. (2017). Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(7). https://doi.org/10.1115/1.4035962

Fang, X., Paynabar, K., & Gebraeel, N. (2017). Multistream sensor fusion-based prognostics model for systems with single failure modes. Reliability Engineering and System Safety, 159, 322–331. https://doi.org/10.1016/j.ress.2016.11.008

Fang, X., Gebraeel, N. Z., & Paynabar, K. (2017). Scalable prognostic models for large-scale condition monitoring applications. IISE Transactions, 49(7), 698–710. https://doi.org/10.1080/24725854.2016.1264646

Fang, X., Paynabar, K., & Gebraeel, N. (2017). Image-based prognostics using penalized tensor regression. ArXiv. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85092884816&partnerID=MN8TOARS

Hopkins, D. C. (2017). Grid Modernization – FREEDM Systems Center. Presented at the Interagency Advanced Power Group-Electronics Systems Working Group, Tallahassee, FL.

Hopkins, D. C. (2017). 3D Printing Power Supply in Package Power Supply on Chip versus Discrete Packaging. Panel Discussion presented at the IEEE Applied Power Electronics Conference, Tampa, FL.

Hopkins, D. C. (2017). Heterogeneous Integration Integrated Power Devices Roadmap. Presented at the Electronics Packaging Symposium and Workshop, Niskayuna, NY.

Hopkins, D. C., & Ke, H. (2017). True 3D Power Packaging - Higher Densities Through Orthogonality. Presented at the ASME International Technical Conference and Exhibition on Packaging Integration of Electronic and Photonic Microsystems (InterPACK), San Francisco, CA.

Hopkins, D. C., Zhao, X., Jagannadham, K., Reainthippayasakul, W., Lanagan, M. T., Jiang, Y., … Fukawa, Y. (2017, August 29). Characterization of Novel Materials for Thin Flexible Power Substrates for High-Density Power Electronics. Keynote presented at the ASME International Technical Conference And Exhibition on Packaging Integration of Electronic and Photonic Microsystems (InterPACK), San Francisco, CA.

Morgan, A., Zhao, X., Rouse, J., & Hopkins, D. (2017). Characterization of Silicone Gel for High Temperature Encapsulation in High Voltage WBG Power Modules. International Symposium on Microelectronics, 2017(1), 000312–000317. https://doi.org/10.4071/isom-2017-wa54_099

Zhao, X., Jagannadham, K., & Hopkins, D. C. (2017). Multiphysics Performance Evaluation of Flexible Substrate Based 1.2kV SiC Half Bridge Intelligent Power Module with Stacked Dies. International Symposium on Microelectronics, 2017(1), 000353–000359. https://doi.org/10.4071/isom-2017-wp22_095

Zhao, X., Jagannadham, K., Reainthippayasakul, W., Lanagan, M. T., & Hopkins, D. C. (2017). Characterization of Ultra-Thin Epoxy-Resin Based Dielectric Substrate for Flexible Power Electronics Applications. International Symposium on Microelectronics, 2017(1), 000151–000156. https://doi.org/10.4071/isom-2017-tp55_094

Ke, H., Jiang, Y., Morgan, A. J., & Hopkins, D. C. (2017). Investigation of Package Effects on the Edge Termination E-Field for HV WBG Power Semiconductors. International Symposium on Microelectronics, 2017(1), 000224–000230. https://doi.org/10.4071/isom-2017-wa32_092

Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017). Rheology of nanocellulose-rich aqueous suspensions: A review. BioResources, 12(4), 9556–9661. Retrieved from https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_12_4_9556_Hubbe_Rheology_Nanocellulose_Aqueous_Suspension/5699

Mönch, L., Uzsoy, R., & Fowler, J. W. (2017). A survey of semiconductor supply chain models part III: master planning, production planning, and demand fulfilment. International Journal of Production Research, 56(13), 4565–4584. https://doi.org/10.1080/00207543.2017.1401234

Mönch, L., Uzsoy, R., & Fowler, J. W. (2017). A survey of semiconductor supply chain models part I: semiconductor supply chains, strategic network design, and supply chain simulation. International Journal of Production Research, 56(13), 4524–4545. https://doi.org/10.1080/00207543.2017.1401233

de Assis, C. A., Houtman, C., Phillips, R., Bilek, E. M. (T., Rojas, O. J., Pal, L., … Gonzalez, R. (2017). Cover Image, Volume 11, Issue 4. Biofuels, Bioproducts and Biorefining, 11(4), i-i. https://doi.org/10.1002/BBB.1798

Eldesouky, I., Harrysson, O., Marcellin-Little, D. J., West, H., & El-Hofy, H. (2017). Pre-clinical evaluation of the mechanical properties of a low-stiffness cement-injectable hip stem. Journal of Medical Engineering & Technology, 41(8), 681–691. https://doi.org/10.1080/03091902.2017.1394391

Eldesouky, I., Harrysson, O., West, H., & Elhofy, H. (2017). Electron beam melted scaffolds for orthopedic applications. Additive Manufacturing, 17, 169–175. https://doi.org/10.1016/J.ADDMA.2017.08.005

Hart, K. R., Lankford, S. M., Freund, I. A., Patrick, J. F., Krull, B. P., Wetzel, E. D., … White, S. R. (2017). Repeated healing of delamination damage in vascular composites by pressurized delivery of reactive agents. Composites Science and Technology, 151, 1–9. https://doi.org/10.1016/J.COMPSCITECH.2017.07.027

Carey, B. J., Ou, J. Z., Clark, R. M., Berean, K. J., Zavabeti, A., Chesman, A. S. R., … Kalantar-Zadeh, K. (2017). Erratum: Corrigendum: Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals. Nature Communications, 8(1). https://doi.org/10.1038/NCOMMS15116

Cooper, C. B., Arutselvan, K., Liu, Y., Armstrong, D., Lin, Y., Khan, M. R., … Dickey, M. D. (2017). Sensors: Stretchable Capacitive Sensors of Torsion, Strain, and Touch Using Double Helix Liquid Metal Fibers (Adv. Funct. Mater. 20/2017). Advanced Functional Materials, 27(20). https://doi.org/10.1002/ADFM.201770124

Cai, Y., Starly, B., Cohen, P., & Lee, Y.-S. (2017). Sensor Data and Information Fusion to Construct Digital-twins Virtual Machine Tools for Cyber-physical Manufacturing. Procedia Manufacturing, 10, 1031–1042. https://doi.org/10.1016/J.PROMFG.2017.07.094

Singh, S., Angrish, A., Barkley, J., Starly, B., Lee, Y.-S., & Cohen, P. (2017). Streaming Machine Generated Data to Enable a Third-Party Ecosystem of Digital Manufacturing Apps. Procedia Manufacturing, 10, 1020–1030. https://doi.org/10.1016/J.PROMFG.2017.07.093

Angrish, A., Starly, B., Lee, Y.-S., & Cohen, P. H. (2017). A flexible data schema and system architecture for the virtualization of manufacturing machines (VMM). Journal of Manufacturing Systems, 45, 236–247. https://doi.org/10.1016/J.JMSY.2017.10.003

Narayanan, L. K., Thompson, T. L., Bhat, A., Starly, B., & Shirwaiker, R. A. (2017). Investigating dielectric impedance spectroscopy as a non-destructive quality assessment tool for 3D cellular constructs. ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 4. https://doi.org/10.1115/MSEC20172725

Narayanan, L. K., Starly, B., & Shirwaiker, R. A. (2017). Non-destructive quality assessment of 3D-biofabricated constructs using dielectric impedance spectroscopy. 67th Annual Conference and Expo of the Institute of Industrial Engineers 2017, 1846–1851. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85030973322&partnerID=MN8TOARS

Traverson, M., Lussier, B., Huneault, L., & Gatineau, M. (2017). Comparative outcomes between ameroid ring constrictor and cellophane banding for treatment of single congenital extrahepatic portosystemic shunts in 49 dogs (1998-2012). Veterinary Surgery, 47(2), 179–187. https://doi.org/10.1111/vsu.12747

Seminelli, M. D., Wilson, J. W., & McConnell, B. M. (2017). Implementing discrete event simulation to improve optometry clinic operations. Proceedings - Winter Simulation Conference, 2157–2168. https://doi.org/10.1109/WSC.2016.7822258

Joshipura, I. D., Finn, M., Tan, S. T. M., Dickey, M. D., & Lipomi, D. J. (2017). Stretchable bioelectronics—Current and future. MRS Bulletin, 42(12), 960–967. https://doi.org/10.1557/mrs.2017.270

Hubbard, A. M., Mailen, R. W., Zikry, M. A., Dickey, M. D., & Genzer, J. (2017). Controllable curvature from planar polymer sheets in response to light. Soft Matter, 13(12), 2299–2308. https://doi.org/10.1039/c7sm00088j

Carey, B. J., Ou, J. Z., Clark, R. M., Berean, K. J., Zavabeti, A., Chesman, A. S. R., … Kalantar-Zadeh, K. (2017). Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals. Nature Communications, 8, 14482. https://doi.org/10.1038/ncomms14482

Dickey, M. D. (2017). Stretchable and Soft Electronics using Liquid Metals. Advanced Materials, 29(27), 1606425. https://doi.org/10.1002/adma.201606425

Suarez, F., Parekh, D. P., Ladd, C., Vashaee, D., Dickey, M. D., & Öztürk, M. C. (2017). Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics. Applied Energy, 202, 736–745. https://doi.org/10.1016/j.apenergy.2017.05.181

Wissman, J., Dickey, M. D., & Majidi, C. (2017). Field-Controlled Electrical Switch with Liquid Metal. Advanced Science, 4(12), 1700169. https://doi.org/10.1002/advs.201700169

Albey, E., Yanikoglu, I., & Uzsoy, R. (2017). Load dependent lead time modelling: A robust optimization approach. 2017 winter simulation conference (wsc), 3531–3542.

Bharambe, V., Parekh, D. P., Ladd, C., Moussa, K., Dickey, M. D., & Adams, J. J. (2017). Vacuum-filling of liquid metals for 3D printed RF antennas. ADDITIVE MANUFACTURING, 18, 221–227. https://doi.org/10.1016/j.addma.2017.10.012

Kim, G., Hodgson, T., King, R., Liu, Y., & Kay, M. (2017). Allocation heuristics for high-altitude long-endurance UAV image intelligence platforms. Military Operations Research, 22(3), 5–19. https://doi.org/10.5711/1082598322305

Shen, J. Y., Aiken, M. W., Abbasi, M., Parekh, D. P., Zhao, X., Dickey, M., & Ricketts, D. S. (2017). Rapid prototyping of low loss 3D printed waveguides for millimeter-wave applications. 2017 ieee mtt-s international microwave symposium (ims), 41–44. https://doi.org/10.1109/mwsym.2017.8058593

Gamzina, D., Luhmann, N. C., Ledford, C., Horn, T., Karakaut, I., Lin, L., & Frigola, P. (2017). Additive vacuum electronics electron beam melting of copper. 2017 eighteenth international vacuum electronics conference (ivec). https://doi.org/10.1109/ivec.2017.8289495

Zhao, X., Jiang, Y., Gao, B., Nishiguchi, K., Fukawa, Y., & Hopkins, D. C. (2017). Novel Polymer Substrate-Based 1.2 kV/40 A Double-Sided Intelligent Power Module. 2017 IEEE 67TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2017), pp. 1461–1467. https://doi.org/10.1109/ectc.2017.285

Zhao, X., Gao, B., Jiang, Y., Zhang, L., Wang, S., Xu, Y., … Hopkins, D. C. (2017). Flexible epoxy-resin substrate based 1.2 kV SiC half bridge module with ultra-low parasitics and high functionality. https://doi.org/10.1109/ecce.2017.8096700

Reichel, K. S., Lozada-Smith, N., Mendis, R., Joshipura, I., Dickey, M., & Mittleman, D. M. (2017). Active THz waveguides enabled by liquid metal actuation. 2017 conference on lasers and electro-optics (cleo). https://doi.org/10.1364/cleo_si.2017.sm3j.3

Narayanan, L. K., Thompson, T. L., Bhat, A., Starly, B., & Shirwaiker, R. (2017). Investigating dielectric impedance spectroscopy as a non-destructive quality assessment tool for 3D cellular constructs. Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 4. https://doi.org/10.1115/msec2017-2725

Schoenfeld-Tacher, R. M., Horn, T. J., Scheviak, T. A., Royal, K. D., & Hudson, L. C. (2017). Evaluation of 3D Additively Manufactured Canine Brain Models for Teaching Veterinary Neuroanatomy. JOURNAL OF VETERINARY MEDICAL EDUCATION, 44(4), 612–619. https://doi.org/10.3138/jvme.0416-080r

Morgan, A., Choobineh, L., Fresne, D., & Hopkins, D. C. (2017). Numerical and Experimental Determination of Temperature Distribution in 3D Stacked Power Devices. ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Presented at the ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2017 Conference on Information Storage and Processing Systems. https://doi.org/10.1115/ipack2017-74222

Zhang, J., Starly, B., Cai, Y., Cohen, P. H., & Lee, Y.-S. (2017). Particle learning in online tool wear diagnosis and prognosis. JOURNAL OF MANUFACTURING PROCESSES, 28, 457–463. https://doi.org/10.1016/j.jmapro.2017.04.012

Smith, E. J., Marcellin-Little, D. J., Harrysson, O., & Griffith, E. H. (2017). Three-dimensional assessment of curvature, torsion, and canal flare index of the humerus of skeletally mature nonchondrodystrophic dogs. American Journal of Veterinary Research, 78(10), 1140–1149. https://doi.org/10.2460/ajvr.78.10.1140

Kravetz, C., Brito, J. O., Saloni, D., & Tilotta, D. C. (2017). Qualitative analysis of the extractives of orange wood. Wood and Fiber Science, 49(4), 407–412. Retrieved from https://wfs.swst.org/index.php/wfs/article/view/2599

Eaker, C. B., Hight, D. C., John D. O'Regan, Dickey, M. D., & Daniels, K. E. (2017). Oxidation-Mediated Fingering in Liquid Metals. PHYSICAL REVIEW LETTERS, 119(17). https://doi.org/10.1103/physrevlett.119.174502

Kumar, A., Lau, W., & Starly, B. (2017). Human Mesenchymal Stem Cells Expansion on Three-Dimensional (3D) Printed Poly-Styrene (PS) Scaffolds in a Perfusion Bioreactor. 3RD CIRP CONFERENCE ON BIOMANUFACTURING, Vol. 65, pp. 115–120. https://doi.org/10.1016/j.procir.2017.04.012

Ahiska, S. S., Gocer, F., & King, R. E. (2017). Heuristic inventory policies for a hybrid manufacturing/remanufacturing system with product substitution. COMPUTERS & INDUSTRIAL ENGINEERING, 114, 206–222. https://doi.org/10.1016/j.cie.2017.10.014

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. (2017). Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets. JOURNAL OF APPLIED PHYSICS, 122(19). https://doi.org/10.1063/1.5000040

Lin, Y., Gordon, O., Khan, M. R., Vasquez, N., Genzer, J., & Dickey, M. D. (2017). Vacuum filling of complex microchannels with liquid metal. LAB ON A CHIP, 17(18), 3043–3050. https://doi.org/10.1039/c7lc00426e

Tayeb, A. H., Hubbe, M. A., Tayeb, P., Pal, L., & Rojas, O. J. (2017). Soy Proteins As a Sustainable Solution to Strengthen Recycled Paper and Reduce Deposition of Hydrophobic Contaminants in Papermaking: A Bench and Pilot-Plant Study. ACS Sustainable Chemistry & Engineering, 5(8), 7211–7219. https://doi.org/10.1021/acssuschemeng.7b01425

Kong, X. C., Dong, J., & Cohen, P. (2017). Modeling of the dynamic machining force of vibration-assisted nanomachining process. Journal of Manufacturing Processes, 28, 101–108. https://doi.org/10.1016/j.jmapro.2017.05.028

Assis, C. A., Houtman, C., Phillips, R., Bilek, E. M., Rojas, O. J., Pal, L., … Gonzalez, R. (2017). Conversion Economics of Forest Biomaterials: Risk and Financial Analysis of CNC Manufacturing. BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 11(4), 682–700. https://doi.org/10.1002/bbb.1782

Khoshmanesh, K., Tang, S.-Y., Zhu, J. Y., Schaefer, S., Mitchell, A., Kalantar-Zadeh, K., & Dickey, M. D. (2017). [Review of Liquid metal enabled microfluidics]. LAB ON A CHIP, 17(6), 974–993. https://doi.org/10.1039/c7lc00046d

Eaker, C. B., Joshipura, I. D., Maxwell, L. R., Heikenfeld, J., & Dickey, M. D. (2017). Electrowetting without external voltage using paint-on electrodes. LAB ON A CHIP, 17(6), 1069–1075. https://doi.org/10.1039/c6lc01500j

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. A. (2017). A fully coupled thermo-viscoelastic finite element model for self-folding shape memory polymer sheets. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 55(16), 1207–1219. https://doi.org/10.1002/polb.24372

Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9

Wu, C., Wang, B., Zhang, C., Wysk, R. A., & Chen, Y.-W. (2017). [Review of Bioprinting: an assessment based on manufacturing readiness levels]. CRITICAL REVIEWS IN BIOTECHNOLOGY, 37(3), 333–354. https://doi.org/10.3109/07388551.2016.1163321

Cooper, C. B., Arutselvan, K., Liu, Y., Armstrong, D., Lin, Y., Khan, M. R., … Dickey, M. D. (2017). Stretchable Capacitive Sensors of Torsion, Strain, and Touch Using Double Helix Liquid Metal Fibers. ADVANCED FUNCTIONAL MATERIALS, 27(20). https://doi.org/10.1002/adfm.201605630

Pal, L., & Joyce, M. (2017). Paper need not be flat: paper and biomaterials industries need to converge to bring about true innovation. BioResources, 12(2), 2249–2251.

Orgut, I. S., Ivy, J., & Uzsoy, R. (2017). Modeling for the equitable and effective distribution of food donations under stochastic receiving capacities. IISE TRANSACTIONS, 49(6), 567–578. https://doi.org/10.1080/24725854.2017.1300358

Mellor, L. F., Huebner, P., Cai, S., Mohiti-Asli, M., Taylor, M. A., Spang, J., … Loboa, E. G. (2017). Fabrication and Evaluation of Electrospun, 3D-Bioplotted, and Combination of Electrospun/3D-Bioplotted Scaffolds for Tissue Engineering Applications. BIOMED RESEARCH INTERNATIONAL, 2017. https://doi.org/10.1155/2017/6956794

Lu, Y., Lin, Y., Chen, Z., Hu, Q., Liu, Y., Yu, S., … Gu, Z. (2017). Enhanced Endosomal Escape by Light-Fueled Liquid-Metal Transformer. NANO LETTERS, 17(4), 2138–2145. https://doi.org/10.1021/acs.nanolett.6b04346

Warren, P. B., Huebner, P., Spang, J. T., Shirwaiker, R. A., & Fisher, M. B. (2017). Engineering 3D-Bioplotted scaffolds to induce aligned extracellular matrix deposition for musculoskeletal soft tissue replacement. CONNECTIVE TISSUE RESEARCH, 58(3-4), 342–354. https://doi.org/10.1080/03008207.2016.1276177

Eaker, C. B., Joshipura, I. D., Maxwell, L. R., Heikenfeld, J., & Dickey, M. D. (2017, April 7). Electrowetting without external voltage using paint-on electrodes (vol 17, pg 1069, 2017). LAB ON A CHIP, Vol. 17, pp. 1359–1359. https://doi.org/10.1039/c7lc90029e

Mehendale, S. V., Mellor, L. F., Taylor, M. A., Loboa, E. G., & Shirwaiker, R. A. (2017). Effects of 3D-bioplotted polycaprolactone scaffold geometry on human adipose-derived stem cell viability and proliferation. RAPID PROTOTYPING JOURNAL, 23(3), 534–542. https://doi.org/10.1108/rpj-03-2016-0035

Lin, Y., Liu, Y., Genzer, J., & Dickey, M. D. (2017). Shape-transformable liquid metal nanoparticles in aqueous solution. CHEMICAL SCIENCE, 8(5), 3832–3837. https://doi.org/10.1039/c7sc00057j

Liu, Y., Shaw, B., Dickey, M. D., & Genzer, J. (2017). Sequential self-folding of polymer sheets. SCIENCE ADVANCES, 3(3). https://doi.org/10.1126/sciadv.1602417

Patrick, J. F., Krull, B. P., Garg, M., Mangun, C. L., Moore, J. S., Sottos, N. R., & White, S. R. (2017). Robust sacrificial polymer templates for 3D interconnected microvasculature in fiber-reinforced composites. Composites Part A: Applied Science and Manufacturing, 100, 361–370. https://doi.org/10.1016/j.compositesa.2017.05.022

Albey, E., Bilge, U., & Uzsoy, R. (2017). Multi-dimensional clearing functions for aggregate capacity modelling in multi-stage production systems. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 55(14), 4164–4179. https://doi.org/10.1080/00207543.2016.1257169

Diebold, A. V., Watson, A. M., Holcomb, S., Tabor, C., Mast, D., Dickey, M. D., & Heikenfeld, J. (2017). Electrowetting-actuated liquid metal for RF applications. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 27(2). https://doi.org/10.1088/1361-6439/aa556a

Nordberg, R. C., Zhang, J., Griffith, E. H., Frank, M. W., Starly, B., & Loboa, E. G. (2017). Electrical Cell-Substrate Impedance Spectroscopy Can Monitor Age-Grouped Human Adipose Stem Cell Variability During Osteogenic Differentiation. STEM CELLS TRANSLATIONAL MEDICINE, 6(2), 502–511. https://doi.org/10.5966/sctm.2015-0404

Wang, M., Khan, M. R., Dickey, M. D., & Adams, J. J. (2017). A Compound Frequency- and Polarization-Reconfigurable Crossed Dipole Using Multidirectional Spreading of Liquid Metal. IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 16, 79–82. https://doi.org/10.1109/lawp.2016.2556983

Rezaei, F., Dickey, M. D., Bourham, M., & Hauser, P. J. (2017). Surface modification of PET film via a large area atmospheric pressure plasma: An optical analysis of the plasma and surface characterization of the polymer film. SURFACE & COATINGS TECHNOLOGY, 309, 371–381. https://doi.org/10.1016/j.surfcoat.2016.11.072

Chung, W.-H., Kremer, G. E. O., & Wysk, R. A. (2017). A dynamic programming method for product upgrade planning incorporating technology development and end-of-life decisions. JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING, 34(1), 30–41. https://doi.org/10.1080/21681015.2016.1192067

Ferrer, A., Pal, L., & Hubbe, M. (2017). Nanocellulose in packaging: Advances in barrier layer technologies. INDUSTRIAL CROPS AND PRODUCTS, 95, 574–582. https://doi.org/10.1016/j.indcrop.2016.11.012

Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y. Y., Salas, C., Pal, L., & Rojas, O. J. (2017). [Review of Nanocellulose in thin films, coatings, and plies for packaging applications: a review]. BioResources, 12(1), 2143–2233.

Shay, T., Dickey, M. D., & Velev, O. D. (2017). Hydrogel-enabled osmotic pumping for microfluidics: towards wearable human-device interfaces. LAB ON A CHIP, 17(4), 710–716. https://doi.org/10.1039/c6lc01486k

Tan, Z., Havell, E. A., Orndorff, P. E., & Shirwaiker, R. A. (2017). Antibacterial efficacy and cytotoxicity of low intensity direct current activated silver-titanium implant system prototype. BIOMETALS, 30(1), 113–125. https://doi.org/10.1007/s10534-017-9993-1