Center for Additive Manufacturing and Logistics - 2018

Saloni, D., Mervine, N., & Verdi, C. (2018). Design and Development of Biopolymers for Additive Manufacturing. Peer-Reviewed Proceedings of the 2018 Industrial and Systems Engineering, 330–335.

Ziarnetzky, T., Monch, L., & Uzsoy, R. (2018, May). Production Planning Models with Chance Constraints and Advance Demand Information. Presented at the IISE Annual Conference, Orlando, FL.

Bansal, A., Uzsoy, R., & Kempf, K. G. (2018, November). Coordinating Capacity Negotiations In Semiconductor Industry. Presented at the INFORMS National Meeting, Phoenix, AZ.

Sengul Orgut, I., Ivy, J. S., & Uzsoy, R. (2018, November). Modeling for the Equitable and Effective Distribution of Food Donations Under Stochastic Capacities. Presented at the INFORMS National Meeting, Phoenix, AZ.

Sengul Orgut, I., Ivy, J. S., Uzsoy, R., & Hale, C. (2018, November). Robust Optimization Approaches for the Equitable and Effective Distribution of Donated Food. Presented at the INFORMS National Meeting, Phoenix, AZ.

Kacar, N. B., Munch, L., & Uzsoy, R. (2018). Problem Reduction Approaches for Production Planning Using Clearing Functions. Presented at the 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). https://doi.org/10.1109/coase.2018.8560429

Gopalswamy, K., & Uzsoy, R. (2018). AN EXPLORATORY COMPARISON OF CLEARING FUNCTION AND DATA-DRIVEN PRODUCTION PLANNING MODELS. Presented at the 2018 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2018.8632371

Manda, A. B., & Uzsoy, R. (2018). SIMULATION OPTIMIZATION FOR PLANNING PRODUCT TRANSITIONS IN SEMICONDUCTOR MANUFACTURING FACILITIES. Presented at the 2018 Winter Simulation Conference (WSC). https://doi.org/10.1109/wsc.2018.8632253

Manda, A. B., & Uzsoy, R. (2018, November). A Review of Product Ramping Models in Semiconductor Manufacturing. Presented at the INFORMS National Meeting, Phoenix, AZ.

Manda, A. B., & Uzsoy, R. (2018, November). Planning Releases During Product Transitions in Semiconductor Manufacturing. Presented at the INFORMS National Meeting, Phoenix, AZ.

Gopalswamy, K., & Uzsoy, R. (2018, November). Conic Reformulations of Production Planning Problems with Clearing Functions. Presented at the INFORMS National Meeting, Phoenix, AZ.

Medhin, N., & Uzsoy, R. (2018). Production Planning and Engineering Process Improvement. Communications in Applied Analysis, 22(4), 583–596.

Uzsoy, R. (2018). Editorial 2017 Best Paper Award. IEEE Transactions on Semiconductor Manufacturing, 31(3), 325–325. https://doi.org/10.1109/TSM.2018.2852818

Fang, X., Paynabar, K., & Gebraeel, N. (2018). Real-Time Predictive Analytics Using Degradation Image Data. Proceedings - Annual Reliability and Maintainability Symposium, 2018-January. https://doi.org/10.1109/RAM.2018.8463083

Hopkins, D. C. (2018, June 25). Heterogeneous Integration Roadmap Update-integrated power electronics (IPE). Presented at the International Symposium on 3D Power Electronics Integration and Manufacturing, College Park, MD.

Chen, T., & Hopkins, D. C. (2018, February 6). Comparing Power Packaging Through A Thermal Resistance Circle Based on Finite Element Analysis. Presented at the PowerAmerica Annual Meeting, Raleigh, NC.

Gao, B., Morgan, A., Xu, Y., Zhao, X., & Hopkins, D. C. (2018, February 6). 6.5kV, 100A, 175kHz Super Cascode Power Module (SCPM). Presented at the PowerAmerica Annual Meeting, Raleigh, NC.

Gao, B., Morgan, A., & Hopkins, D. C. (2018, June 7). Scalable MV/HV Super Cascode Power Module. Presented at the FREEDM Systems Center Annual Meeting, Raleigh, NC.

Golding, C., & Hopkins, D. C. (2018, June 7). Development of De-encapsulation Process for WBG Semiconductor Packaging Rework and Failure Analysis. Presented at the FREEDM Systems Center Annual Meeting, Raleigh, NC.

Guven, M., & Hopkins, D. C. (2018, June 7). Parasitic Integration for 500kHz ZVS DC-DC Converter Using New Polymer Material in IMS Module. Presented at the FREEDM Systems Center Annual Meeting, Raleigh, NC.

Morgan, A., & Hopkins, D. C. (2018, June 7). Self-Oscillating WBG-based VHF Power Conversion for FREEDM Applications. Presented at the FREEDM Systems Center Annual Meeting, Raleigh, NC.

Gao, B., Zhao, X., & Hopkins, D. C. (2018). Increasing Electrical and Thermal Performances of VRMs by Using Folded Flexible Substrate. 2018 Second International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). Presented at the 2018 Second International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). https://doi.org/10.1109/3dpeim.2018.8525238

Gao, B., Morgan, A., Xu, Y., Zhao, X., Ballard, B., & Hopkins, D. C. (2018). 6.5kV SiC JFET-based Super Cascode Power Module with High Avalanche Energy Handling Capability. 2018 IEEE 6th Workshop on Wide Bandgap Power Devices and Applications (WiPDA). Presented at the 2018 IEEE 6th Workshop on Wide Bandgap Power Devices and Applications (WiPDA). https://doi.org/10.1109/wipda.2018.8569146

Han, K., Kanale, A., Baliga, B. J., Ballard, B., Morgan, A., & Hopkins, D. C. (2018). New Short Circuit Failure Mechanism for 1.2kV 4H-SiC MOSFETs and JBSFETs. 2018 IEEE 6th Workshop on Wide Bandgap Power Devices and Applications (WiPDA). Presented at the 2018 IEEE 6th Workshop on Wide Bandgap Power Devices and Applications (WiPDA). https://doi.org/10.1109/wipda.2018.8569178

De Assis, T., Reisinger, L. W., Dasmohapatra, S., Pawlak, P., Jameel, H., Pal, L., … Gonzalez, R. W. (2018). Performance and Sustainability vs. the shelf price of tissue paper kitchen towels. BioResources, 13(3), 6868–6892. Retrieved from https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_13_3_6868_De_Assis_Sustainability_Tissue_Paper_Kitchen/6279

Rice, M., Pal, L., Gonzalez, R., & Hubbe, M. (2018). Wet-end addition of nanofibrillated cellulose pretreated with cationic starch to achieve paper strength with less refining and higher bulk. July 2018, 17(07), 395–403. https://doi.org/10.32964/tj17.07.395

Joyce, M., Pal, L., & Tran, T. (2018). Production of polyhydroxyalkanoates (PHA)-based renewable packaging materials using photonic energy: A bench and pilot-scale study. Octobr 2018, 17(10), 557–565. https://doi.org/10.32964/tj17.10.557

Tyagi, P., Mathew, R., Opperman, C., Jameel, H., Gonzalez, R., Lucia, L., … Pal, L. (2018). High-Strength Antibacterial Chitosan–Cellulose Nanocrystal Composite Tissue Paper. Langmuir, 35(1), 104–112. https://doi.org/10.1021/acs.langmuir.8b02655

Deng, J., Dong, J., & Cohen, P. (2018). Rapid Fabrication and Characterization of SERS Substrates. Procedia Manufacturing, 26, 580–586. https://doi.org/10.1016/J.PROMFG.2018.07.068

Kong, X., Wei, C., Zhu, Y., Cohen, P., & Dong, J. (2018). Modeling of Catalyst-free Growth Process of ZnO Nanowires. Procedia Manufacturing, 26, 349–358. https://doi.org/10.1016/J.PROMFG.2018.07.043

Uzsoy, R., Fowler, J. W., & Mönch, L. (2018). A survey of semiconductor supply chain models Part II: demand planning, inventory management, and capacity planning. International Journal of Production Research, 56(13), 4546–4564. https://doi.org/10.1080/00207543.2018.1424363

Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J. (2018). Correction to: Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V. JOM, 70(3), 436–436. https://doi.org/10.1007/S11837-018-2736-0

Angrish, A., Craver, B., Hasan, M., & Starly, B. (2018). A Case Study for Blockchain in Manufacturing: “FabRec”: A Prototype for Peer-to-Peer Network of Manufacturing Nodes. Procedia Manufacturing, 26, 1180–1192. https://doi.org/10.1016/J.PROMFG.2018.07.154

ASTRO-DF: A Class of Adaptive Sampling Trust-Region Algorithms for Derivative-Free Stochastic Optimization. (2018). SIAM Journal on Optimization. https://doi.org/10.1137/15m1042425

Shashaani, S., Guikema, S. D., Zhai, C., Pino, J. V., & Quiring, S. M. (2018). Multi-Stage Prediction for Zero-Inflated Hurricane Induced Power Outages. IEEE Access, 6, 62432–62449. https://doi.org/10.1109/ACCESS.2018.2877078

Heiden, M., Stanciu, L., Nauman, E., Jones-Hall, Y., Breur, G., & Traverson, M. (2018). In Vivo Evaluation of Biodegradability and Biocompatibility of Fe30Mn Alloy. Veterinary and Comparative Orthopaedics and Traumatology, 31(01), 010–016. https://doi.org/10.3415/VCOT-17-06-0080

Balaguer, T., Fellah, B. H., Boukhechba, F., Traverson, M., Mouska, X., Ambrosetti, D., … Rochet, N. (2018). Combination of blood and biphasic calcium phosphate microparticles for the reconstruction of large bone defects in dog: A pilot study. Journal of Biomedical Materials Research Part A, 106(7), 1842–1850. https://doi.org/10.1002/jbm.a.36384

Moore, T. A., McConnell, B. M., & Wilson, J. R. (2018). Simulation-based Evaluation On Integrating Additive Manufacturing Capability In A Deployed Military Environment. Proceedings of the 2018 Winter Simulation Conference, 3721–3729. https://doi.org/10.1109/wsc.2018.8632474

Karagul, H. F., Warsing, D. P., Hodgson, T. J., Kapadia, M. S., & Uzsoy, R. (2018). A comparison of mixed integer programming formulations of the capacitated lot-sizing problem. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 56(23), 7064–7084. https://doi.org/10.1080/00207543.2017.1401232

Rogers, M. B., McConnell, B. M., Hodgson, T. J., Kay, M. G., King, R. E., Parlier, G., & Thoney Barletta, K. (2018). A Military Logistics Network Planning System. Military Operations Research, 23(4), 5–24. https://doi.org/10.5711/1082598323405

Ruppert, D. S., Harrysson, O. L. A., Marcellin-Little, D. J., Dahners, L. E., & Weinhold, P. S. (2018). Improved osseointegration with as-built electron beam melted textured implants and improved peri-implant bone volume with whole body vibration. MEDICAL ENGINEERING & PHYSICS, 58, 64–71. https://doi.org/10.1016/j.medengphy.2018.05.003

Joshipura, I. D., Ayers, H. R., Castillo, G. A., Ladd, C., Tabor, C. E., Adams, J. J., & Dickey, M. D. (2018). Patterning and Reversible Actuation of Liquid Gallium Alloys by Preventing Adhesion on Rough Surfaces. ACS Applied Materials & Interfaces, 10(51), 44686–44695. https://doi.org/10.1021/acsami.8b13099

Efird, W. M., Fletcher, A. G., Draeger, R. W., Spang, J. T., Dahners, L. E., & Weinhold, P. S. (2018). Deferoxamine-Soaked Suture Improves Angiogenesis and Repair Potential After Acute Injury of the Chicken Achilles Tendon. ORTHOPAEDIC JOURNAL OF SPORTS MEDICINE, 6(10). https://doi.org/10.1177/2325967118802792

Lin, Y., Genzer, J., Li, W., Qiao, R., Dickey, M. D., & Tang, S.-Y. (2018). Sonication-enabled rapid production of stable liquid metal nanoparticles grafted with poly(1-octadecene-alt-maleic anhydride) in aqueous solutions. NANOSCALE, 10(42), 19871–19878. https://doi.org/10.1039/c8nr05600e

Hubbard, A. M., Davis, D. S., Dickey, M. D., & Genzer, J. (2018). Shape memory polymers for self-folding via compression of thermoplastic sheets. JOURNAL OF APPLIED POLYMER SCIENCE, 135(47). https://doi.org/10.1002/app.46889

Kang, Y., Albey, E., & Uzsoy, R. (2018). Rounding heuristics for multiple product dynamic lot-sizing in the presence of queueing behavior. COMPUTERS & OPERATIONS RESEARCH, 100, 54–65. https://doi.org/10.1016/j.cor.2018.07.019

Pahwa, D., Starly, B., & Cohen, P. (2018). Reverse auction mechanism design for the acquisition of prototyping services in a manufacturing-as-a-service marketplace. JOURNAL OF MANUFACTURING SYSTEMS, 48, 134–143. https://doi.org/10.1016/j.jmsy.2018.05.005

Rezaei, F., Talley, J. N., Dickey, M. D., & Hauser, P. J. (2018). Superhydrophobic/oleophobic coatings based on a catalyst driven thiol-epoxy-acrylate ternary system. JOURNAL OF APPLIED POLYMER SCIENCE, 135(45). https://doi.org/10.1002/app.46710

Uzsoy, R. (2018, November). Appreciation to Our Reviewers. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol. 31, pp. 405–405. https://doi.org/10.1109/TSM.2018.2871481

Latif, T., McKnight, M., Dickey, M. D., & Bozkurt, A. (2018). In vitro electrochemical assessment of electrodes for neurostimulation in roach biobots. PLOS ONE, 13(10). https://doi.org/10.1371/journal.pone.0203880

Reichel, K. S., Lozada-Smith, N., Joshipura, I. D., Ma, J., Shrestha, R., Mendis, R., … Mittleman, D. M. (2018). Electrically reconfigurable terahertz signal processing devices using liquid metal components. NATURE COMMUNICATIONS, 9(1). https://doi.org/10.1038/s41467-018-06463-z

Agate, S., Joyce, M., Lucia, L., & Pal, L. (2018). Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites – A review. Carbohydrate Polymers, 198, 249–260. https://doi.org/10.1016/j.carbpol.2018.06.045

Barbee, M. H., Mondal, K., Deng, J. Z., Bharambe, V., Neumann, T. V., Adams, J. J., … Craig, S. L. (2018). Mechanochromic Stretchable Electronics. ACS APPLIED MATERIALS & INTERFACES, 10(35), 29918–29924. https://doi.org/10.1021/acsami.8b09130

Ziarnetzky, T., Moench, L., & Uzsoy, R. (2018). Rolling horizon, multi-product production planning with chance constraints and forecast evolution for wafer fabs. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 56(18), 6112–6134. https://doi.org/10.1080/00207543.2018.1478461

Zhao, X., Gao, B., Zhang, L. Q., Hopkins, D. C., & Huang, A. Q. (2018). Performance optimization of A 1.2kV SiC high density half bridge power module in 3D package. Thirty-third annual ieee applied power electronics conference and exposition (apec 2018), 1266–1271. https://doi.org/10.1109/apec.2018.8341179

Gao, B., Morgan, A. J., Xu, Y., Zhao, X., & Hopkins, D. C. (2018). 6.0kV, 100A, 175kHz super cascode power module for medium voltage, high power applications. Thirty-third annual ieee applied power electronics conference and exposition (apec 2018), 1288–1293. https://doi.org/10.1109/apec.2018.8341182

Orgut, I. S., Ivy, J. S., Uzsoy, R., & Hale, C. (2018). Robust optimization approaches for the equitable and effective distribution of donated food. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH, 269(2), 516–531. https://doi.org/10.1016/j.ejor.2018.02.017

Park, S., Nallainathan, U., Mondal, K., Sen, P., & Dickey, M. D. (2018). Light-Induced Buckles Localized by Polymeric Inks Printed on Bilayer Films. SMALL, 14(20). https://doi.org/10.1002/smll.201704460

Strong, D., Kay, M., Conner, B., Wakefield, T., & Manogharan, G. (2018). Hybrid manufacturing - integrating traditional manufacturers with additive manufacturing (AM) supply chain. ADDITIVE MANUFACTURING, 21, 159–173. https://doi.org/10.1016/j.addma.2018.03.010

Deng, J., Dong, J., & Cohen, P. H. (2018). Development and Characterization of Ultrasonic Vibration Assisted Nanomachining Process for Three-Dimensional Nanofabrication. IEEE TRANSACTIONS ON NANOTECHNOLOGY, 17(3), 559–566. https://doi.org/10.1109/tnano.2018.2826841

Kong, X., Wei, C., Zhu, Y., Cohen, P., & Dong, J. (2018). Characterization and Modeling of Catalyst-free Carbon-Assisted Synthesis of ZnO Nanowires. JOURNAL OF MANUFACTURING PROCESSES, 32, 438–444. https://doi.org/10.1016/j.jmapro.2018.03.018

Park, S., Mondal, K., Treadway, R. M., III, Kumar, V., Ma, S., Holbery, J. D., & Dickey, M. D. (2018). Silicones for Stretchable and Durable Soft Devices: Beyond Sylgard-184. ACS APPLIED MATERIALS & INTERFACES, 10(13), 11261–11268. https://doi.org/10.1021/acsami.7b18394

Andrews, J. B., Mondal, K., Neumann, T. V., Cardenas, J. A., Wang, J., Parekh, D. P., … al. (2018). Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors. ACS NANO, 12(6), 5482–5488. https://doi.org/10.1021/acsnano.8b00909

Daeneke, T., Khoshmanesh, K., Mahmood, N., Castro, I. A., Esrafilzadeh, D., Barrow, S. J., … Kalantar-zadeh, K. (2018). [Review of Liquid metals: fundamentals and applications in chemistry]. CHEMICAL SOCIETY REVIEWS, 47(11), 4073–4111. https://doi.org/10.1039/c7cs00043j

Narayanan, L. K., Thompson, T. L., Shirwaiker, R. A., & Starly, B. (2018). Label free process monitoring of 3D bioprinted engineered constructs via dielectric impedance spectroscopy. BIOFABRICATION, 10(3). https://doi.org/10.1088/1758-5090/aaccbf

Basinger, K. L., Keough, C. B., Webster, C. E., Wysk, R. A., Martin, T. M., & Harrysson, O. L. (2018). Development of a modular computer-aided process planning (CAPP) system for additive-subtractive hybrid manufacturing of pockets, holes, and flat surfaces. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 96(5-8), 2407–2420. https://doi.org/10.1007/s00170-018-1674-x

Karagul, K., Kay, M. G., & Tokat, S. (2018). A new method for generating initial solutions of capacitated vehicle routing problems. Gazi University Journal of Science, 31(2), 489–513.

Shay, T., Velev, O. D., & Dickey, M. D. (2018). Soft electrodes combining hydrogel and liquid metal. SOFT MATTER, 14(17), 3296–3303. https://doi.org/10.1039/c8sm00337h

Bharambe, V., Parekh, D. P., Ladd, C., Moussa, K., Dickey, M. D., & Adams, J. J. (2018). Liquid-Metal-Filled 3-D Antenna Array Structure With an Integrated Feeding Network. IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 17(5), 739–742. https://doi.org/10.1109/lawp.2018.2813309

Tyagi, P., Hubbe, M. A., Lucia, L., & Pal, L. (2018). High performance nanocellulose-based composite coatings for oil and grease resistance. Cellulose, 25(6), 3377–3391. https://doi.org/10.1007/s10570-018-1810-7

Uzsoy, R. (2018, May). Editorial from the Incoming Editor-in-Chief. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol. 31, pp. 195–195. https://doi.org/10.1109/tsm.2018.2820239

Joyce, M., Pal, L., Hicks, R., Agate, S., Williams, T. S., Ray, G., & Fleming, P. D. (2018). Custom tailoring of conductive ink/substrate properties for increased thin film deposition of poly(dimethylsiloxane) films. Journal of Materials Science: Materials in Electronics, 29(12), 10461–10470. https://doi.org/10.1007/s10854-018-9108-y

Horn, T., Karakurt, I., Ledford, C., Gonzalez, M., Gamzina, D., Luhmann, N. C., & Lin, L. W. (2018). Additively manufactured WR-10 copper waveguide. 2018 ieee international vacuum electronics conference (ivec), 409–410. https://doi.org/10.1109/ivec.2018.8391526

Mahbooba, Z., Thorsson, L., Unosson, M., Skoglund, P., West, H., Horn, T., … Harrysson, O. (2018). Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. APPLIED MATERIALS TODAY, 11, 264–269. https://doi.org/10.1016/j.apmt.2018.02.011

De Assis, T., Reisinger, L. W., Pal, L., Pawlak, J., Jameel, H., & Gonzalez, R. W. (2018). [Review of Understanding the effect of machine technology and cellulosic fibers on tissue properties - a review]. BioResources, 13(2).

Sweeney, P. W., Starly, B., Morris, P. J., Xu, Y., Jones, A., Radhakrishnan, S., … Davis, C. C. (2018). Large-scale digitization of herbarium specimens: Development and usage of an automated, high-throughput conveyor system. TAXON, 67(1), 165–178. https://doi.org/10.12705/671.9

De, A., Morgan, A. J., Mahadeva Iyer, V., Ke, H., Zhao, X., Vechalapu, K., … Hopkins, D. C. (2018). Design, Package, and Hardware Verification of a High-Voltage Current Switch. IEEE Journal of Emerging and Selected Topics in Power Electronics, 6(1), 441–450. https://doi.org/10.1109/jestpe.2017.2727051

Ransikarbum, K., Kim, N., Ha, S., Wysk, R. A., & Rothrock, L. (2018). A Highway-Driving System Design Viewpoint Using an Agent-Based Modeling of an Affordance-Based Finite State Automata. IEEE ACCESS, 6. https://doi.org/10.1109/access.2017.2782257