Center for Additive Manufacturing and Logistics - 2023

Traverson, M., Zheng, J., Tremolada, G., Chen, C. L., Cray, M., Culp, W. T. N., … Selmic, L. E. (2023). Adrenal tumors treated by adrenalectomy following spontaneous rupture carry an overall favorable prognosis : retrospective evaluation of outcomes in 59 dogs and 3 cats (2000-2021). JAVMA-JOURNAL OF THE AMERICAN VETERINARY MEDICAL ASSOCIATION, 261(12). https://doi.org/10.2460/javma.23.06.0324

Basak, M., Gandy, E., Lucia, L. A., & Pal, L. (2023). Polymer upcycling of municipal solid cellulosic waste by tandem mechanical pretreatment and maleic acid hydrolysis. CELL REPORTS PHYSICAL SCIENCE, 4(12). https://doi.org/10.1016/j.xcrp.2023.101689

Koprov, P., Gadhwala, S., Walimbe, A., Fang, X., & Starly, B. (2023, August). Systems and Methods for Authenticating Manufacturing Machines Through an Unobservable Fingerprinting System. MANUFACTURING LETTERS, Vol. 35, pp. 1009–1018. https://doi.org/10.1016/j.mfglet.2023.08.051

Wang, X., He, Y., You, J., & Dickey, M. (2023, August 16). Non-contact Transfer of Liquid Metal from an Anode to Cathode without Short Circuiting. https://doi.org/10.21203/rs.3.rs-3205237/v1

Kanetkar, S., Shah, N. U. H., Gandhi, R. M., Uppal, A., Dickey, M. D., Wang, R. Y., & Rykaczewski, K. (2023). Fabrication of Multiphase Liquid Metal Composites Containing Gas and Solid Fillers: From Pastes to Foams. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.3c00092

Cezario, L. F. C., Júnior, A. F. D., Silva, Á. M., Santos, O. N. A., Ucella-Filho, J. G. M., Paula Protásio, T., … Rousset, P. (2023). Irrigation in Jatropha curcas L. cultivation and its effect on biomass for bioenergy generation. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2023.139527

Ghezehei, S. B., & Saloni, D. (2023, December 22). Assessment of Feedstock Quality of Poplars (<i>Populus</i> L.) Using Selected Pellet-Quality Parameters. BIOENERGY RESEARCH, Vol. 12. https://doi.org/10.1007/s12155-023-10711-6

Hillaire, K. D., Nithyanandam, P., Song, M., Nadimi, S. R., Kiani, A., Dickey, M. D., & Daniels, K. E. (2023, December 14). Interfacial Tension Hysteresis of Eutectic Gallium-Indium. ADVANCED FUNCTIONAL MATERIALS, Vol. 12. https://doi.org/10.1002/adfm.202311501

Wang, M., Hu, J., & Dickey, M. D. (2023). Emerging applications of tough ionogels. NPG ASIA MATERIALS, 15(1). https://doi.org/10.1038/s41427-023-00514-8

Wang, M., & Dickey, M. D. (2023, December 21). Tear-resistant stretchy gels. NATURE MATERIALS, Vol. 12. https://doi.org/10.1038/s41563-023-01764-1

Kan, R., Jiang, M., Song, K., Chen, R., Shen, Q., Wang, R., … Shang, W. (2023, December 1). Liquid Metal-Elastomer Seals for Stretchable Organic Electrolyte-Based Lithium-Ion Batteries. ADVANCED FUNCTIONAL MATERIALS, Vol. 12. https://doi.org/10.1002/adfm.202309861

Vera, R. E., Vivas, K. A., Urdaneta, F., Franco, J., Sun, R., Forfora, N., … Gonzalez, R. (2023). Transforming non-wood feedstocks into dissolving pulp via organosolv pulping: An alternative strategy to boost the share of natural fibers in the textile industry. JOURNAL OF CLEANER PRODUCTION, 429. https://doi.org/10.1016/j.jclepro.2023.139394

Nelson, R. J., Werner, J., Kay, M. G., King, R. E., McConnell, B. M., & Thoney-Barletta, K. (2023, November 18). Two-stage stochastic programming model of US Army aviation allocation of utility helicopters to task forces. JOURNAL OF DEFENSE MODELING AND SIMULATION-APPLICATIONS METHODOLOGY TECHNOLOGY-JDMS, Vol. 11. https://doi.org/10.1177/15485129231209039

Upadhyay, A., Lucia, L., & Pal, L. (2023). Harnessing total chemical-free paper and packaging materials barrier properties by mechanical modification of cellulosic fibers for food security and environmental sustainability. APPLIED MATERIALS TODAY, 35. https://doi.org/10.1016/j.apmt.2023.101973

Bernardes, F. F., Romanelli, T. L., Pereira, A. K. S., Cupertino, G. F. M., Fernandes, M. A., Brito, J. O., … Ryu, C. (2023). Energy Performance of Different Charcoal Production Systems. ENERGIES, 16(21). https://doi.org/10.3390/en16217318

Luo, S., Fang, S.-C., Zhang, J., & King, R. E. (2023). Price competition and cost efficiency facing buyer's bounded rationality. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 266. https://doi.org/10.1016/j.ijpe.2023.109062

Stochastic Constraints: How Feasible is Feasible? (2023). 2023 Winter Simulation Conference.

Jeon, Y., Pasupathy, R., & Shashaani, S. (2023). Statistical Inference on Simulation Output: Batching as an Inferential Device. https://doi.org/10.48550/ARXIV.2311.04159

Shashaani, S., & Vahdat, K. (2023). Monte Carlo Based Machine Learning. In Lecture Notes in Operations Research. https://doi.org/10.1007/978-3-031-24907-5_75

He, Y., You, J., Dickey, M. D., & Wang, X. (2023, October 20). Controllable Flow and Manipulation of Liquid Metals. ADVANCED FUNCTIONAL MATERIALS, Vol. 10. https://doi.org/10.1002/adfm.202309614

Devi, U., Kumar, S. R., Nakshatrala, K. B., & Patrick, J. F. (2023). A methodology for measuring heat transfer coefficient and self-similarity of thermal regulation in microvascular material systems. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 217. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124614

Zhang, H., Carriere, P. R., Amoako, E. D., Rock, C. D., Thielk, S. U., Fletcher, C. G., & Horn, T. J. (2023, August 30). Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing. JOM, Vol. 8. https://doi.org/10.1007/s11837-023-06045-5

Frey, E. J., Im, S., Bachmann, A. L., Genzer, J., & Dickey, M. D. (2023, September 22). Patterning of a High Surface Area Liquid Metal-Carbon Composite Film Using Laser Processing. ADVANCED FUNCTIONAL MATERIALS, Vol. 9. https://doi.org/10.1002/adfm.202308574

Narwal, R., Bhattacharya, S., Baliga, B. J., & Hopkins, D. C. (2023). Bidirectional Three-phase Current Source Converter based Buck-boost AC/DC System using Bidirectional Switches. 2023 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE & EXPO, ITEC. https://doi.org/10.1109/ITEC55900.2023.10186945

Piegols, H. J., Abrams, B. E., Lapsley, J. M., Cray, M. T., Dornbusch, J. A., Murphy, C., … Selmic, L. E. (2023, August 31). Risk factors influencing death prior to discharge in 302 dogs undergoing unilateral adrenalectomy for treatment of primary adrenal gland tumours. VETERINARY AND COMPARATIVE ONCOLOGY, Vol. 8. https://doi.org/10.1111/vco.12931

Im, S., Frey, E., Lacks, D. J., Genzer, J., & Dickey, M. D. (2023, September 7). Enhanced Triboelectric Charge Stability by Air-Stable Radicals. ADVANCED SCIENCE, Vol. 9. https://doi.org/10.1002/advs.202304459

Delatorre, F. M., Cupertino, G. F. M., Pereira, A. K. S., Souza, E. C., Silva, Á. M., Filho, J. G. M. U., … Júnior, A. F. D. (2023). Photoluminous Response of Biocomposites Produced with Charcoal. Polymers. https://doi.org/10.3390/polym15183788

Mehrotra, U., & Hopkins, D. C. (2023). Methodologies of Cascading to Realize High Voltage Cascaded Super Cascode Power Switch. IEEE Journal of Emerging and Selected Topics in Power Electronics, 11(6), 5853–5862. https://doi.org/10.1109/JESTPE.2023.3314025

Jiang, Y., Xia, T., Fang, X., Wang, D., Pan, E., & Xi, L. (2023). Sparse Hierarchical Parallel Residual Networks Ensemble for Infrared Image Stream-Based Remaining Useful Life Prediction. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 19(10), 10613–10623. https://doi.org/10.1109/TII.2022.3229493

Starly, B., Koprov, P., Bharadwaj, A., Batchelder, T., & Breitenbach, B. (2023). “Unreal” factories: Next generation of digital twins of machines and factories in the Industrial Metaverse. Manufacturing Letters, 37, 50–52. https://doi.org/10.1016/j.mfglet.2023.07.021

Nakshatrala, K. B., Adhikari, K., Kumar, S. R., & Patrick, J. F. (2023). Configuration-independent thermal invariants under flow reversal in thin vascular systems. PNAS NEXUS, 2(8). https://doi.org/10.1093/pnasnexus/pgad266

Salem, K. S., Kasera, N. K., Rahman, M. A., Jameel, H., Habibi, Y., Eichhorn, S. J., … Lucia, L. A. (2023, August 17). Comparison and assessment of methods for cellulose crystallinity determination. CHEMICAL SOCIETY REVIEWS, Vol. 8. https://doi.org/10.1039/d2cs00569g

Truong, V. K., Hayles, A., Bright, R., Luu, T. Q., Dickey, M. D., Kalantar-Zadeh, K., & Vasilev, K. (2023, July 28). Gallium Liquid Metal: Nanotoolbox for Antimicrobial Applications. ACS NANO, Vol. 7. https://doi.org/10.1021/acsnano.3c06486

Salem, K. S., Barrios, N., Jameel, H., Pal, L., & Lucia, L. (2023). Computational and experimental insights into the molecular architecture of water-cellulose networks. MATTER, 6(5), 1366–1381. https://doi.org/10.1016/j.matt.2023.03.021

Xing, R., Yang, J., Zhang, D., Gong, W., V. Neumann, T., Wang, M., … Dickey, M. D. (2023). Metallic gels for conductive 3D and 4D printing. MATTER, 6(7), 2248–2262. https://doi.org/10.1016/j.matt.2023.06.015

On Common-Random-Numbers and the Complexity of Adaptive Sampling Trust-Region Methods. (2023, August 4). Retrieved from https://optimization-online.org website: https://optimization-online.org/wp-content/uploads/2023/08/astrodf-complexity-online-version.pdf

Alizadeh, N., Vahdat, K., Shashaani, S., Swann, J. L., & Ozaltin, O. (2023, August 9). Risk Score Models for Unplanned Urinary Tract Infection Hospitalization. https://doi.org/10.1101/2023.08.06.23293723

Barrios, N., Marquez, R., McDonald, J. D., Hubbe, M. A., Venditti, R. A., Venditti, A., & Pal, L. (2023). [Review of Innovation in lignocellulosics dewatering and drying for energy sustainability and enhanced utilization of forestry, agriculture, and marine resources- A review]. ADVANCES IN COLLOID AND INTERFACE SCIENCE, 318. https://doi.org/10.1016/j.cis.2023.102936

Finite Element Analysis and Fatigue Life Prediction of A Laterally Conducting Gan-Based Power Package Under Thermal CyclingASME 2023 Int’l Mechanical Eng. Congress and Exposition. (2023). ASME 2023 Int’l Mechanical Eng. Congress and Exposition. Retrieved from https://event.asme.org/IMECE

Turicek, J. S., Snyder, A. D., Nakshatrala, K. B., & Patrick, J. F. (2023). Topological effects of 3D-printed copolymer interlayers on toughening and in situ self-healing in laminated fiber-composites. COMPOSITES SCIENCE AND TECHNOLOGY, 240. https://doi.org/10.1016/j.compscitech.2023.110073

Ives, L., Bui, T., Habermann, T., Collins, G., Marsden, D., Neilson, J., … Rock, C. (2023). 1.5 MW CW RF Loads for Gyrotrons. 21ST JOINT WORKSHOP ON ELECTRON CYCLOTRON EMISSION AND ELECTRON CYCLOTRON RESONANCE HEATING, EC21, Vol. 277. https://doi.org/10.1051/epjconf/202327704008

Towards Greener Stochastic Derivative-Free Optimization with Trust Regions and Adaptive Sampling. (2023). 2023 Winter Simulation Conference.

Stratification with Concomitant Variables in Stochastic Trust-region Optimization. (2023). 2023 Winter Simulation Conference.

Simulation Optimization with Stochastic Constraints. (2023). 2023 Winter Simulation Conference.

Robust Output Analysis with Monte-Carlo Methodology. (2023).

Iteration Complexity and Finite-Time Efficiency of Adaptive Sampling Trust-Region Methods for Stochastic Derivative-Free Optimization. (2023). Retrieved from https://arxiv.org/abs/2305.10650

Adaptive Robust Genetic Algorithms with Ranking and Selection. (2023). 2023 Winter Simulation Conference.

Agate, S., Williams, A., Dougherty, J., Velev, O. D., & Pal, L. (2023). [Review of Polymer Color Intelligence: Effect of Materials, Instruments, and Measurement Techniques - A Review]. ACS OMEGA, 8(26), 23257–23270. https://doi.org/10.1021/acsomega.2c08252

Hopkins, D. C., & Sinha, S. S. (2023). Design & Integration of Solid-State Circuit Protection. IEEE Applied Power Electronics Conference. Presented at the IEEE Applied Power Electronics Conference, Orange County Convention Center, Orlando, FL.

Narwal, R., Rawat, S., Kanale, A., Cheng, T.-H., Agarwal, A., Bhattacharya, S., … Hopkins, D. C. (2023). Analysis and Characterization of Four-quadrant Switches based Commutation Cell. 2023 IEEE Applied Power Electronics Conference and Exposition (APEC), 209–216. https://doi.org/10.1109/apec43580.2023.10131312

Sinha, S. S., Cheng, T.-H., Parmar, K., & Hopkins, D. C. (2023). Advanced GaN IPM for High-Frequency Converter Applications Enabled with Thin-Substrates. 2023 IEEE Applied Power Electronics Conference and Exposition (APEC), 2596–2603. https://doi.org/10.1109/apec43580.2023.10131488

Zaghari, P., Sinha, S. S., Ryu, J. E., Franzon, P. D., & Hopkins, D. C. (2023). Thermal Cycling and Fatigue Life Analysis of a Laterally Conducting GaN-based Power Package. 2023 IEEE International 3D Systems Integration Conference (3DIC). Presented at the 2023 IEEE International 3D Systems Integration Conference (3DIC). https://doi.org/10.1109/3dic57175.2023.10154901

Chambers, A., Traverson, M., Neal, S., Konala, S., & Harrysson, O. (2023). Performances of novel custom 3D-printed cutting guide in canine caudal maxillectomy: a cadaveric study. Frontiers in Veterinary Science, 10. https://doi.org/10.3389/fvets.2023.1127025

Jain, P., Shashaani, S., & Byon, E. (2023). Wake effect parameter calibration with large-scale field operational data using stochastic optimization. APPLIED ENERGY, 347. https://doi.org/10.1016/j.apenergy.2023.121426

Uzsoy, R. (2023, May). The Editorial. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol. 36, pp. 157–157. https://doi.org/10.1109/TSM.2023.3267283

Houser, E., Shashaani, S., Harrysson, O., & Jeon, Y. (2023, May 13). Predicting additive manufacturing defects with robust feature selection for imbalanced data. IISE TRANSACTIONS, Vol. 5. https://doi.org/10.1080/24725854.2023.2207633

Vera, R. E., Zambrano, F., Marquez, R., Vivas, K. A., Forfora, N., Bedard, J., … Gonzalez, R. (2023). Environmentally friendly oxidation pretreatments to produce sugar-based building blocks from dyed textile wastes via enzymatic hydrolysis. CHEMICAL ENGINEERING JOURNAL, 467. https://doi.org/10.1016/j.cej.2023.143321

Cox Laws, A., Wood, M., Harrysson, O., & Traverson, M. (2023). Novel 3D Custom-Made Silicone Tumor Model as a Support for Teaching Surgical Oncology Principles. Journal of Veterinary Medical Education, 6. https://doi.org/10.3138/jvme-2022-0148

Brito, A., Suarez, A., Pifano, A., Reisinger, L., Wright, J., Saloni, D., … Jameel, H. (2023). Environmental Life Cycle Assessment of Premium and Ultra Hygiene Tissue Products in the United States. BIORESOURCES, 18(2), 4006–4031. https://doi.org/10.15376/biores.18.2.4006-4031

Nelson, R., King, R., McConnell, B. M., & Thoney-Barletta, K. (2023). US Army Aviation air movement operations assignment, utilization and routing. Journal of Defense Analytics and Logistics, 7(1), 2–28. https://doi.org/10.1108/JDAL-11-2022-0013

Rossetti, C. L., Warsing, D. P., Flynn, B. B., & Bozarth, C. C. (2023, April 5). Complex and lean or lean and complex? The role of supply chain complexity in lean production. OPERATIONS MANAGEMENT RESEARCH, Vol. 4. https://doi.org/10.1007/s12063-023-00355-2

Yang, J., Nithyanandam, P., Kanetkar, S., Kwon, K. Y., Ma, J., Im, S., … Dickey, M. D. (2023, April 2). Liquid Metal Coated Textiles with Autonomous Electrical Healing and Antibacterial Properties. ADVANCED MATERIALS TECHNOLOGIES, Vol. 4. https://doi.org/10.1002/admt.202202183

Baliga, B. J., Hopkins, D., Bhattacharya, S., Agarwal, A., Cheng, T.-H., Narwal, R., … Han, K. (2023). The BiDFET Device and Its Impact on Converters. IEEE POWER ELECTRONICS MAGAZINE, 10(1), 20–27. https://doi.org/10.1109/MPEL.2023.3237059

Bhattacharya, S., Narwal, R., Shah, S. S., Baliga, B. J., Agarwal, A., Kanale, A., … Cheng, T.-H. (2023). Power Conversion Systems Enabled by SiC BiDFET Device. IEEE POWER ELECTRONICS MAGAZINE, 10(1), 39–43. https://doi.org/10.1109/MPEL.2023.3237060

Huynh, T. B. N., Song, J., Bae, H. E., Kim, Y., Dickey, M. D. D., Sung, Y.-E., … Kwon, O. J. (2023, March 28). Ir-Ru Electrocatalysts Embedded in N-Doped Carbon Matrix for Proton Exchange Membrane Water Electrolysis. ADVANCED FUNCTIONAL MATERIALS, Vol. 3. https://doi.org/10.1002/adfm.202301999

Salem, K. S., Jameel, H., Lucia, L., & Pal, L. (2023). Sustainable high-yield lignocellulosic fibers and modification technologies educing softness and strength for tissues and hygiene products for global health. MATERIALS TODAY SUSTAINABILITY, 22. https://doi.org/10.1016/j.mtsust.2023.100342

Piskarev, Y., Devincenti, A., Ramachandran, V., Bourban, P.-E., Dickey, M. D., Shintake, J., & Floreano, D. (2023, March 16). A Soft Gripper with Granular Jamming and Electroadhesive Properties. ADVANCED INTELLIGENT SYSTEMS, Vol. 3. https://doi.org/10.1002/aisy.202200409

Wu, Y., Li, S., Zhao, Z., Zhang, D., Xiong, X., Yu, T., … Yang, J. (2023). Convex Microarrays-Based Liquid Metal Soft Piezoresistive Stress Sensor With High Sensitivity and Large Measurement Range. IEEE SENSORS JOURNAL, 23(9), 9176–9182. https://doi.org/10.1109/JSEN.2023.3260029

Joshipura, I. D., Nguyen, C. K., Quinn, C., Yang, J., Morales, D. H., Santiso, E., … Dickey, M. D. (2023). An atomically smooth container: Can the native oxide promote supercooling of liquid gallium? ISCIENCE, 26(4). https://doi.org/10.1016/j.isci.2023.106493

Shen, Q., Jiang, M., Wang, R., Song, K., Vong, M. H., Jung, W., … Deng, T. (2023). Liquid metal-based soft, hermetic, and wireless-communicable seals for stretchable systems. SCIENCE, 379(6631), 488–493. https://doi.org/10.1126/science.ade7341

Teran, J. E., Pal, L., Spontak, R. J., & Lucia, L. (2023, January 30). Surface Mechanical Properties and Topological Characteristics of Thermoplastic Copolyesters after Precisely Controlled Abrasion. ACS APPLIED MATERIALS & INTERFACES, Vol. 1. https://doi.org/10.1021/acsami.2c19377

Eckman, D. J., Henderson, S. G., & Shashaani, S. (2023, March 9). SimOpt: A Testbed for Simulation-Optimization Experiments. INFORMS JOURNAL ON COMPUTING, Vol. 3. https://doi.org/10.1287/ijoc.2023.1273

Ovalle, D. G., Rock, C., Winkler, C., Hartshorn, D., Barr, C., Cullom, T., … Horn, T. (2023). Microstructure development and properties of micro-alloyed copper, Cu-0.3Zr-0.15Ag, produced by electron beam additive manufacturing. Materials Characterization, 197, 112675. https://doi.org/10.1016/j.matchar.2023.112675

Xu, J., Wang, Z., Wang, X., Wu, Y., Xing, R., Yu, T., … Yang, J. (2023, January 25). Breathable Encapsulated Liquid Metal Foam-Based Soft Stress Sensor. ADVANCED MATERIALS TECHNOLOGIES, Vol. 1. https://doi.org/10.1002/admt.202201193

Suarez, A., Ford, E., Venditti, R., Kelley, S., Saloni, D., & Gonzalez, R. (2023). Is sugarcane-based polyethylene a good alternative to fight climate change? Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2023.136432

Vivas, K., Gonzalez, R., & Saloni, D. (2023). From a Sustainability Perspective, Why Should Bioplastics Be Used for Additive Manufacturing? Polymer Science, 4(4), 000594. https://doi.org/10.31031/PSPRJ.2023.04.000594

Zhao, X., Liu, Y., Zhao, L., Yazdkhasti, A., Mao, Y., Siciliano, A., … Hu, L. (2023). A scalable high-porosity wood for sound absorption and thermal insulation. Nature Sustainability, 1. https://doi.org/10.1038/s41893-022-01035-y

Jia, Y., Yang, N., Xu, S., Snyder, A. D. D., Patrick, J. F. F., Kumar, R., … Xu, C. (2023). Polymer-derived SiOC reinforced with core-shell nanophase structure of ZrB2/ZrO2 for excellent and stable high-temperature microwave absorption (up to 900 degrees C). SCIENTIFIC REPORTS, 13(1). https://doi.org/10.1038/s41598-023-27541-3

Hia, I. L., Snyder, A. D., Turicek, J. S., Blanc, F., Patrick, J. F., & Therriault, D. (2023). Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing. COMPOSITES SCIENCE AND TECHNOLOGY, 232. https://doi.org/10.1016/j.compscitech.2022.109850

Farrell, Z. J., Jacob, A. R., Truong, V. K., Elbourne, A., Kong, W., Hsiao, L., … Tabor, C. (2023, January 11). Compositional Design of Surface Oxides in Gallium-Indium Alloys. CHEMISTRY OF MATERIALS, Vol. 1. https://doi.org/10.1021/acs.chemmater.2c02696

Eckman, D. J., Henderson, S. G., & Shashaani, S. (2023, January 5). Diagnostic Tools for Evaluating and Comparing Simulation- Optimization Algorithms. INFORMS JOURNAL ON COMPUTING, Vol. 1. https://doi.org/10.1287/ijoc.2022.1261

Erlenbach, S., Mondal, K., Ma, J., Neumann, T. V., Ma, S., Holbery, J. D., & Dickey, M. D. (2023, January 4). Flexible-to-Stretchable Mechanical and Electrical Interconnects. ACS APPLIED MATERIALS & INTERFACES, Vol. 1. https://doi.org/10.1021/acsami.2c14260

Vallem, V., Aggarwal, V., & Dickey, M. D. (2023). Stretchable Liquid Metal Films with High Surface Area and Strain Invariant Resistance. Advanced Materials Technologies. https://doi.org/10.1002/admt.202201233

Zhou, C., & Fang, X. (2023). A convex two-dimensional variable selection method for the root-cause diagnostics of product defects. RELIABILITY ENGINEERING & SYSTEM SAFETY, 229. https://doi.org/10.1016/j.ress.2022.108827

Bachmann, A. L., Ferris, A. L., Im, S., Dickey, M. D., & Lazarus, N. (2023). Laser-Induced Graphene from SU-8 Photoresist: Toward Functional Micromolding. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.2c00045

Davis, D., Mailen, R., Luong, E., Russell, A., Dickey, M. D., & Genzer, J. (2023). Reprogrammable Self-Folding Thermoplastic Sheets Using Elastic Filaments. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.2c00041

Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023, March 9). Shaping a Soft Future: Patterning Liquid Metals. ADVANCED MATERIALS, Vol. 3. https://doi.org/10.1002/adma.202205196

Liu, T., Li, Y., Yang, J.-Y., Wang, T.-T., Wang, X., Yang, L.-A., … Hao, Y. (2023). High-Efficiency and High-Current GaN-Based Microwave Rectifier for Wireless Strain Sensing and Monitoring. IEEE Transactions on Microwave Theory and Techniques. https://doi.org/10.1109/TMTT.2022.3197407

Ghadimi, F., Aouam, T., & Uzsoy, R. (2023). Safety stock placement with market selection under load-dependent lead times. IISE Transactions. https://doi.org/10.1080/24725854.2022.2074578