Works Published in 2021
Displaying works 21 - 40 of 126 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
2021 speech
Fast Approximate Solutions for Capacitated Production Planning Under Uncertain Demand
Uzsoy, R. (2021, January). Presented at the Technical University of Munich, (Virtual).
Event: Technical University of Munich at (Virtual)
Source: NC State University Libraries
Added: February 26, 2022
2021 conference paper
A Resource Coordination Model for Managing Product Transitions
Leca, C. A., Kempf, K. G., & Uzsoy, R. (2021, August). Presented at the IEEE Conference on Automation Science and Engineering (CASE), Lyons, France.
Event: IEEE Conference on Automation Science and Engineering (CASE) at Lyons, France on August 23-27, 2021
Source: NC State University Libraries
Added: February 26, 2022
2021 article proceedings
An Optimization Framework for Managing Product Transitions in Semiconductor Manufacturing
Presented at the 2021 Winter Simulation Conference (WSC).
Event: 2021 Winter Simulation Conference (WSC)
TL;DR:
Computational experiments indicate that the model captures the interactions between agents in a logically consistent manner, providing a basis for decentralized approaches and stochastic formulations.
(via Semantic Scholar)
Sources: Crossref, ORCID
Added: February 25, 2022
2021 conference paper
Multistream sensor fusion-based prognostics model for systems under multiple operational conditions
Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021, 2.
TL;DR:
A prognostic framework for systems that operate under dynamic multiple operational conditions that will first extract the degradation signal from each sensor by removing the jump information resulted from the change of operational conditions, and is validated using a degradation data set of aircraft turbofan engines from NASA repository.
(via Semantic Scholar)
Source: ORCID
Added: February 24, 2022
2021 journal article
Two-dimensional variable selection and its applications in the diagnostics of product quality defects
IISE Transactions.
Contributors: C. Jeong n & X. Fang n
author keywords: Penalized matrix regression; two-dimensional variable selection; adaptive group LASSO; block coordinate proximal descent
arxiv.org (repository)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: ORCID
Added: February 24, 2022
2021 journal article
Evaluation of outcomes following subtotal colectomy for the treatment of idiopathic megacolon in cats
Journal of the American Veterinary Medical Association, 259(11), 1–8.
MeSH headings : Animals; Cat Diseases / surgery; Cats; Colectomy / adverse effects; Colectomy / methods; Colectomy / veterinary; Constipation / etiology; Constipation / surgery; Constipation / veterinary; Humans; Megacolon / complications; Megacolon / surgery; Megacolon / veterinary; Retrospective Studies; Treatment Outcome
TL;DR:
It is indicated that subtotal colectomy was associated with long survival times and a high rate of owner satisfaction, and removal of the ICJ wasassociated with less favorable outcomes in cats of the present study.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, Crossref
Added: February 7, 2022
2021 article
Applications of liquid metals in nanotechnology
Allioux, F.-M., Ghasemian, M. B., Xie, W., Anthony P. O'Mullane, Daeneke, T., Dickey, M. D., & Kalantar-Zadeh, K. (2021, December 23). NANOSCALE HORIZONS, Vol. 12.
MeSH headings : Alloys / chemistry; Electronics; Metals / chemistry; Nanostructures / chemistry; Nanotechnology
TL;DR:
The review presents the unique properties of post-transition liquid metals nanodroplets for developing functional materials for electronics, sensors, catalysts, energy systems, and nanomedicine and biomedical applications, as well as other functional systems engineered at the nanoscale.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID
Added: January 10, 2022
2021 article
Counterpropagating Gradients of Antibacterial and Antifouling Polymer Brushes
Ko, Y., Truong, V. K., Woo, S. Y., Dickey, M. D., Hsiao, L., & Genzer, J. (2021, December 14). BIOMACROMOLECULES, Vol. 12.
MeSH headings : Anti-Bacterial Agents / pharmacology; Biofouling / prevention & control; Polymerization; Polymers
TL;DR:
The formation of counterpropagating density gradients in poly([2-dimethylaminoethyl] methacrylate) (PDMAEMA) brushes featuring spatially varying quaternized and betainized units are reported on.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
6. Clean Water and Sanitation
(OpenAlex)
Sources: Web Of Science, ORCID
Added: January 3, 2022
2021 article
Liquid Metal Interdigitated Capacitive Strain Sensor with Normal Stress Insensitivity
Zhang, D., Zhang, J., Wu, Y., Xiong, X., Yang, J., & Dickey, M. D. (2021, December 21). ADVANCED INTELLIGENT SYSTEMS, Vol. 12.
author keywords: capacitive sensors; crosstalk-free; microfluidics; pressure-insensitivity; strain sensing
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, ORCID
Added: January 3, 2022
2021 journal article
Characterization of copper & stainless steel interface produced by electron beam powder bed fusion
Characterization of copper & stainless steel interface produced by electron beam powder bed fusion. MATERIALS & DESIGN, 212.
author keywords: Additive manufacturing; Cu; Bimetallic; Miscibility gap; Liquid phase separation; Interface
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, ORCID
Added: December 20, 2021
2021 journal article
Osmotically Enabled Wearable Patch for Sweat Harvesting and Lactate Quantification
MICROMACHINES, 12(12).
author keywords: paper microfluidics; sweat; sensing; hydrogels; lactate; osmotic pumping; evaporation; capillary; wicking; biochemical assay
TL;DR:
The measurements show the that the total number of moles of lactate in sweat is correlated to sweat rate, and sweat appears to be a suitable biofluid for lactate quantification.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: ORCID, Web Of Science
Added: December 6, 2021
2021 article
Skin-Inspired Capacitive Stress Sensor with Large Dynamic Range via Bilayer Liquid Metal Elastomers
Yang, J., Kwon, K. Y., Kanetkar, S., Xing, R., Nithyanandam, P., Li, Y., … Dickey, M. D. (2021, November 17). ADVANCED MATERIALS TECHNOLOGIES, Vol. 11.
author keywords: bilayer; high sensitivity; large measurement range; liquid metal; pressure sensor
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, ORCID
Added: November 29, 2021
2021 journal article
Characterizing the Effects of Synergistic Thermal and Photo-Cross-Linking during Biofabrication on the Structural and Functional Properties of Gelatin Methacryloyl (GeIMA) Hydrogels
ACS BIOMATERIALS SCIENCE & ENGINEERING, 7(11), 5175–5188.
author keywords: GelMA; thermo-reversible cross-linking; photo-cross-linking; biofabrication; tissue engineering; CryoSEM; qPCR
MeSH headings : Biocompatible Materials; Gelatin; Humans; Hydrogels; Methacrylates; Tissue Engineering
TL;DR:
The finding that hydrogels processed at higher temperature possessed lower structural fidelity but resulted in more cell elongation and greater anisotropy over time demonstrate the significant impact of GelMA material formulation and processing conditions on the structural and functional properties of the hydrogel.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 29, 2021
2021 journal article
Multichannel profile-based monitoring method and its application in the basic oxygen furnace steelmaking process
JOURNAL OF MANUFACTURING SYSTEMS, 61, 375–390.
author keywords: Condition monitoring; Functional data analysis; Mahalanobis distance; Support vector data description
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 23, 2021
2021 article
Order release in production planning and control systems: challenges and opportunities
Missbauer, H., & Uzsoy, R. (2021, November 3). INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 11.
author keywords: Production planning; order release; cycle times; hierarchical production planning; optimization
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 15, 2021
2021 article
Editorial
Uzsoy, R. (2021, November). IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol. 34, pp. 443–443.
Sources: Web Of Science, ORCID
Added: November 15, 2021
2021 article
Liquid-Metal-Enabled Mechanical-Energy-Induced CO2 Conversion
Tang, J., Tang, J., Mayyas, M., Ghasemian, M. B., Sun, J., Rahim, M. A., … Kalantar-Zadeh, K. (2021, October 21). ADVANCED MATERIALS, Vol. 10.
author keywords: CO; (2) conversion; liquid metals; mechanical energy; triboelectrochemical reactions
TL;DR:
A green carbon capture and conversion technology offering scalability and economic viability for mitigating CO2 emissions and the nonpolar nature of the liquid gallium interface allows the solid products to instantaneously exfoliate, hence keeping active sites accessible.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
13. Climate Action
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 8, 2021
2021 article
Deposition of silicate coatings on poly(ethylene terephthalate) for improved scratch and solvent resistance
Castillo, G. A., Dickey, M. D., Gorman, C. B., Genzer, J., & Efimenko, K. (2021, October 21). JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 10.
author keywords: coatings; crystallization; packaging
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 8, 2021
2021 article
A genetic algorithm for order acceptance and scheduling in additive manufacturing
Kapadia, M. S., Uzsoy, R., Starly, B., & Warsing, D. P., Jr. (2021, October 23). INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 10.
author keywords: Order acceptance scheduling; genetic algorithms; additive manufacturing; statistical optimum estimation; batch machine scheduling
UN Sustainable Development Goal Categories
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 8, 2021
2021 journal article
Electron Beam Melting of Niobium Alloys from Blended Powders
MATERIALS, 14(19).
author keywords: niobium; tungsten; zirconium; high-strength metal alloys; plasma spheroidization; additive manufacturing
TL;DR:
A custom electron beam powder bed fusion machine was used to demonstrate the processability of blended niobium-based tungsten alloys, with resulting solid optical densities of 99+%.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, ORCID
Added: November 8, 2021
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
