Mechanical and Aerospace Engineering - 2010 Lochman, B. J., Murphree, Z. R., Narayanaswamy, V., & Clemens, N. T. (2010). PLIF imaging of naphthalene-ablation products in a Mach 5 turbulent boundary layer. 27th AIAA Aerodynamic Measurement Technology and Ground Testing Conference 2010, 1. https://doi.org/10.2514/6.2010-4346 Narayanaswamy, V., Clemens, N. T., & Raja, L. L. (2010). Investigation of a pulsed-plasma jet for shock / boundary layer control. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649810322&partnerID=MN8TOARS Narayanaswamy, V., Raja, L. L., & Clemens, N. T. (2010). Characterization of a high-frequency pulsed-plasma jet actuator for supersonic flow control. AIAA Journal, 48(2), 297–305. https://doi.org/10.2514/1.41352 Parida, P. R., Ekkad, S. V., & Ngo, K. (2010). Novel PCM and jet impingement based cooling scheme for high density transient heat loads. 2010 14th International Heat Transfer Conference, IHTC 14, 7, 443–450. https://doi.org/10.1115/IHTC14-22841 Sedalor, T., Patil, S., Ekkad, S., Tafti, D., Kim, Y., Moon, H.-K., & Srinivasan, R. (2010). Study of flow and convective heat transfer in a simulated scaled up low emission annular combustor. Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), 787–794. https://doi.org/10.1115/GT2010-22986 Parida, P. R., Ekkad, S. V., & Ngo, K. (2010). Innovative liquid cooling configurations for high heat flux applications. 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. https://doi.org/10.1109/ITHERM.2010.5501356 Abraham, S., Panchal, K., Xue, S., Ekkad, S. V., Ng, W., Brown, B. J., & Malandra, A. (2010). Experimental and numerical investigations of a transonic, high turning turbine cascade with a divergent endwall. American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 1(PARTS A, B AND C), 569–576. https://doi.org/10.1115/FEDSM-ICNMM2010-30393 Reagle, C., Newman, A., Xue, S., Ng, W., Ekkad, S., Moon, H. K., & Zhang, L. (2010). A transient infrared technique for measuring surface and endwall heat transfer in a transonic turbine cascade. Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), 405–411. https://doi.org/10.1115/GT2010-22975 Fong, R.-Y., & Cheng, J.-H. (2010). Human Injury Evaluation on Production 125cc. Scooter under Side Slip Impact. Abaqus Taiwan Users’ Conference. Lin, Y.-C., & Fong, R.-Y. (2010). 95' Planning Yacht Deck Structure Arrangement and Parameter Optimization. Abaqus Taiwan Users’ Conference. Rezvanian, O., & Zikry, M. A. (2010). Thermo-mechanical modeling of RF MEMS devices. 2010 3rd International Conference on Thermal Issues in Emerging Technologies, Theory and Applications - Proceedings, ThETA3 2010, 63–67. https://doi.org/10.1109/THETA.2010.5766380 Elkhodary, K., Lee, W., Cheeseman, B., Sun, L., Brenner, D., & Zikry, M. (2010). The effects of precipitates and Mn-bearing particles on the high strain-rate compression of high strength aluminum. Materials Research Society Symposium Proceedings, 1225, 19–23. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-79952052398&partnerID=MN8TOARS Chadderdon, S., Vella, T., Selfridge, R., Schultz, S., Webb, S., Park, C., … Zikry, M. (2010). High-speed full-spectrum interrogation of fiber Bragg gratings for composite impact sensing. Proceedings of SPIE - The International Society for Optical Engineering, 7648. https://doi.org/10.1117/12.847662 Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling Particle Loading in Fibrous Filter Media. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas. Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling Particle Filtration in 3-D Electrospun Nanofibrous Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas. Tahir, M. A., Tafreshi, H. V., & Pourdeyhimi, B. (2010, November 10). Modeling Radiative Heat Transfer in Fibrous Insulation Media. Presented at the NETInc, Innovative Nonwovens Conference, Raleigh, North Carolina. Hosseini, S. A., & Tafreshi, H. V. (2010, August 30). Modeling Filtration Efficiency of Electrospun Nanofibrous Filters. Presented at the Nanofibers for the 3rd Millennium, Raleigh, North Carolina. Tahir, M. A., Tafreshi, H. V., Hosseini, S. A., & Pourdeyhimi, B. (2010). Modeling the role of microstructural parameters in radiative heat transfer through disordered fibrous media. International Journal of Heat and Mass Transfer, 53(21-22), 4629–4637. https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.030 Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling particle filtration in disordered 2-D domains: A comparison with cell models. Separation and Purification Technology, 74(2), 160–169. https://doi.org/10.1016/j.seppur.2010.06.001 Hosseini, S. A., & Tafreshi, H. V. (2010). 3-D simulation of particle filtration in electrospun nanofibrous filters. Powder Technology, 201(2), 153–160. https://doi.org/10.1016/j.powtec.2010.03.020 Ashari, A., Bucher, T. M., Tafreshi, H. V., Tahir, M. A., & Rahman, M. S. A. (2010). Modeling fluid spread in thin fibrous sheets: Effects of fiber orientation. International Journal of Heat and Mass Transfer, 53(9-10), 1750–1758. https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.015 Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling permeability of 3-D nanofiber media in slip flow regime. Chemical Engineering Science, 65(6), 2249–2254. https://doi.org/10.1016/j.ces.2009.12.002 Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Influence of fiber orientation distribution on performance of aerosol filtration media. Chemical Engineering Science, 65(18), 5285–5293. https://doi.org/10.1016/j.ces.2010.06.032 Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Effect of fiber orientation distribution on filter performance. American Filtration and Separations Society Annual National Conference and Exposition 2010, 2. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883817446&partnerID=MN8TOARS Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Capture efficiency and pressure drop of bimodal filter media. American Filtration and Separations Society Annual National Conference and Exposition 2010, 2, 710–718. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883771850&partnerID=MN8TOARS Ashari, A., Bucher, T. M., & Vahedi Tafreshi, H. (2010). A semi-analytical model for simulating fluid transport in multi-layered fibrous sheets made up of solid and porous fibers. Computational Materials Science, 50(2), 378–390. https://doi.org/10.1016/j.commatsci.2010.08.030 Fotovati, S., Vahedi Tafreshi, H., Ashari, A., Hosseini, S. A., & Pourdeyhimi, B. (2010). Analytical expressions for predicting capture efficiency of bimodal fibrous filters. Journal of Aerosol Science, 41(3), 295–305. https://doi.org/10.1016/j.jaerosci.2010.01.002 Zhang, S., Jiang, X., Lapsley, M., Moses, P., & Shrout, T. R. (2010). Piezoelectric accelerometers for ultrahigh temperature application. Applied Physics Letters, 96(1), 013506. https://doi.org/10.1063/1.3290251 Zhu, J., Wei, S., Ryu, J., Budhathoki, M., Liang, G., & Guo, Z. (2010). In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites. Journal of Materials Chemistry, 20(23), 4937–4948. https://doi.org/10.1039/c0jm00063a Kang, J. S., Kim, H. S., Ryu, J., Hahn, H. T., Jang, S., & Joung, J. W. (2010). Inkjet printed electronics using copper nanoparticle ink. Journal of Materials Science: Materials in Electronics, 21(11), 1213–1220. https://doi.org/10.1007/s10854-009-0049-3 Telly, S., Perkins, E., Shrestha, D., & Balachandran, B. (2010). Noise Enhanced Performance of Coupled Oscillators: Entropy Studies. Presented at the 13th Conference on Nonlinear Vibrations, Dynamics, and Multi-body Systems, Blacksburg, VA. Liu, J., Li, J., Grummel, B., Xu, C., & Shen, J. (2010). A Contactless Polymer Derived Ceramic Temperature Sensing System for Turbine Applications. Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion. Ali, A., Luo, H., Syed, K. S., & Ishaq, M. (2010). A Parallel Discontinuous Galerkin Code for Compressible Fluid Flows on Unstructured Grids. Journal of Engineering and Applied Sciences, 29(1), 57–75. Vermillion, C. (2010). Automated Sensitivity-Based Optimization for Control and Identification. 2010 Workshop on Identification for Automotive Systems. Linz, Austria. Lynch, K., Bloch, A., Drakunov, S., Reyhanoglu, M., & Zenkov, D. (2010). Control of Nonholonomic and Underactuated Systems. In The Control Systems Handbook, Second Edition (pp. 42–41-42–36). https://doi.org/10.1201/b10384-49 Kim, H.-S., Huh, J., & Ryu, J. (2010). Investigation of moisture-induced delamination failure in a semiconductor package via multi-scale mechanics. Journal of Physics D: Applied Physics, 44(3), 034007. https://doi.org/10.1088/0022-3727/44/3/034007 Fang, T., & Zhang, J. (2010). Thermal boundary layers over a shrinking sheet: An analytical solution. Acta Mechanica, 209(3-4), 325–343. https://doi.org/10.1007/s00707-009-0183-2 Zhong, Y., Wert, K. L., & Fang, T. (2010). Waste heat powered adsorption system to provide air conditioning for heavy-duty vehicles. ASHRAE Transactions, 116(PART 2), 300–309. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-79952635208&partnerID=MN8TOARS Pantokratoras, A., & Fang, T. (2010). Flow of a weakly conducting fluid in a channel filled with a porous medium. Transport in Porous Media, 83(3), 667–676. https://doi.org/10.1007/s11242-009-9470-6 Fang, T., Lee, C.-F., Coverdill, R., & White, R. (2010). Effects of injection pressure on low-sooting combustion in an optical hsdi diesel engine using a narrow angle injector. SAE Technical Papers. https://doi.org/10.4271/2010-01-0339 Hu, J., Xu, F., Huang, A. Q., & Yuan, F. G. (2010). Optimal design of a vibration-based energy harvester using magnetostrictive material (MsM). Smart Materials and Structures, 20(1), 015021. https://doi.org/10.1088/0964-1726/20/1/015021 Kuznetsov, A. V., & Nield, D. A. (2010). Corrigendum to ‘Forced Convection with Slip-Flow in a Channel Occupied by a Hyperporous Medium Saturated by a Rarefied Gas’, Transport in Porous Media, 64, 161–170, 2006, and ‘Thermally Developing Forced Convection in a Porous Medium Occupied by a Rarefied Gas: Parallel Plate Channel or Circular Tube with Walls at Constant Heat Flux’, Transport in Porous Media, 76, 345–362, 2009. Transport in Porous Media, 85(2), 657–658. https://doi.org/10.1007/s11242-010-9654-0 Yin, J., Gerling, G. J., & Chen, X. (2010). Mechanical modeling of a wrinkled fingertip immersed in water. Acta Biomaterialia, 6(4), 1487–1496. https://doi.org/10.1016/j.actbio.2009.10.025 Chen, X., & Yin, J. (2010). Buckling patterns of thin films on curved compliant substrates with applications to morphogenesis and three-dimensional micro-fabrication. Soft Matter, 6(22), 5667. https://doi.org/10.1039/c0sm00401d Zhu, J., Wei, S., Zhang, L., Mao, Y., Ryu, J., Mavinakuli, P., … Guo, Z. (2010). Conductive Polypyrrole/Tungsten Oxide Metacomposites with Negative Permittivity. The Journal of Physical Chemistry C, 114(39), 16335–16342. https://doi.org/10.1021/jp1062463 Zhu, J., Wei, S., Ryu, J., Sun, L., Luo, Z., & Guo, Z. (2010). Magnetic Epoxy Resin Nanocomposites Reinforced with Core−Shell Structured Fe@FeO Nanoparticles: Fabrication and Property Analysis. ACS Applied Materials & Interfaces, 2(7), 2100–2107. https://doi.org/10.1021/am100361h Ryu, J., Kim, H., Lee, S., Hahn, H. T., & Lashmore, D. (2010). Carbon Nanotube Mat as Mediator-Less Glucose Sensor Electrode. Journal of Nanoscience and Nanotechnology, 10(2), 941–947. https://doi.org/10.1166/jnn.2010.1892 Ryu, J., Kim, K., Kim, H.-S., Hahn, H. T., & Lashmore, D. (2010). Intense pulsed light induced platinum–gold alloy formation on carbon nanotubes for non-enzymatic glucose detection. Biosensors and Bioelectronics, 26(2), 602–607. https://doi.org/10.1016/j.bios.2010.07.021 Ryu, J., Kim, H.-S., Hahn, H. T., & Lashmore, D. (2010). Carbon nanotubes with platinum nano-islands as glucose biofuel cell electrodes. Biosensors and Bioelectronics, 25(7), 1603–1608. https://doi.org/10.1016/j.bios.2009.11.019 Luo, H., Luo, L., & Xu, K. (2010). A BGK-Based Discontinuous Galerkin Method for the Navier-Stokes Equations on Arbitrary Grids. In Computational Fluid Dynamics Review 2010 (pp. 103–122). https://doi.org/10.1142/9789814313377_0006 Boris, R., Vermillion, C., & Butts, K. (2010). A comparative analysis of electronic pedal algorithms using a driver-in-the-loop simulator and system identification of driver behavior. Proceedings of the 2010 American Control Conference. Presented at the 2010 American Control Conference (ACC 2010). https://doi.org/10.1109/acc.2010.5531117 Vermillion, C., Butts, K., & Reidy, K. (2010). Model predictive engine torque control with real-time driver-in-the-loop simulation results. Proceedings of the 2010 American Control Conference. Presented at the 2010 American Control Conference (ACC 2010). https://doi.org/10.1109/acc.2010.5531241 Parida, P. R., Mei, F., Jiang, J., Meng, W. J., & Ekkad, S. V. (2010). Experimental Investigation of Cooling Performance of Metal-Based Microchannels. Heat Transfer Engineering, 31(6), 485–494. https://doi.org/10.1080/01457630903409654 Revankar, S. T., & Ekkad, S. V. (2010). Selected Papers From the 19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference. Heat Transfer Engineering, 31(6), 431–432. https://doi.org/10.1080/01457630903408268 Maresca, D., Emmer, M., van Neer, P. L. M. J., Vos, H. J., Versluis, M., Muller, M., … van der Steen, A. F. W. (2010). Acoustic Sizing of an Ultrasound Contrast Agent. Ultrasound in Medicine & Biology, 36(10), 1713–1721. https://doi.org/10.1016/j.ultrasmedbio.2010.06.014 O’Connor, B., Nothern, D., Pipe, K. P., & Shtein, M. (2010). High-efficiency broadband solar cell architectures based on arrays of volumetrically distributed narrowband photovoltaic fibers. Optics Express, 18(S3), A432. https://doi.org/10.1364/oe.18.00a432 O’Connor, B., Chan, E. P., Chan, C., Conrad, B. R., Richter, L. J., Kline, R. J., … DeLongchamp, D. M. (2010). Correlations between Mechanical and Electrical Properties of Polythiophenes. ACS Nano, 4(12), 7538–7544. https://doi.org/10.1021/nn1018768 Choi, J.-H., Kota, A., & Winey, K. I. (2010). Micellar Morphology in Sulfonated Pentablock Copolymer Solutions. Industrial & Engineering Chemistry Research, 49(23), 12093–12097. https://doi.org/10.1021/ie1002476 Gershon, A. L., Cole, D. P., Kota, A. K., & Bruck, H. A. (2010). Nanomechanical characterization of dispersion and its effects in nano-enhanced polymers and polymer composites. Journal of Materials Science, 45(23), 6353–6364. https://doi.org/10.1007/s10853-010-4597-y Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Atomic scale studies of spall behavior in nanocrystalline Cu. Journal of Applied Physics, 108(11), 113518. https://doi.org/10.1063/1.3517827 Voronov, D. L., Cambie, R., Ahn, M., Anderson, E. H., Chang, C. H., Gullikson, E. M., … Wilkins, S. (2010). Ultra-high Resolution Optics for EUV and Soft X-ray Inelastic Scattering. Presented at the SRI 2009, 10TH INTERNATIONAL CONFERENCE ON RADIATION INSTRUMENTATION. https://doi.org/10.1063/1.3463360 Voronov, D. L., Ahn, M., Anderson, E. H., Cambie, R., Chang, C.-H., Gullikson, E. M., … Padmore, H. A. (2010). High-efficiency 5000 lines/mm multilayer-coated blazed grating for extreme ultraviolet wavelengths. Optics Letters, 35(15), 2615. https://doi.org/10.1364/ol.35.002615 Chang, C.-H., Waller, L., & Barbastathis, G. (2010). Design and optimization of broadband wide-angle antireflection structures for binary diffractive optics. Optics Letters, 35(7), 907. https://doi.org/10.1364/ol.35.000907 Chang, C.-H., In, H. J., Takahashi, S., Deterre, M., Choi, H. J., Gotrik, K. W., & Barbastathis, G. (2010). Assembling nanoparticle catalysts with nanospheres for periodic carbon nanotube structure growth. Nanotechnology, 22(3), 035301. https://doi.org/10.1088/0957-4484/22/3/035301 Ultrafast thermoreflectance techniques for measuring thermal conductivity and interface thermal conductance of thin films. (2010). Journal of Applied Physics. https://doi.org/10.1063/1.3504213 Tuning the thermal conductivity of polymers with mechanical strains. (2010). Physical Review B. https://doi.org/10.1103/physrevb.81.174122 Heat transfer enhancement by filling metal porous medium in central area of tubes. (2010). Journal of the Energy Institute. https://doi.org/10.1179/014426010x12592427711911 Echekki, T., & Park, J. (2010). The LES-ODT model for turbulent premixed flames. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649864613&partnerID=MN8TOARS Sarkar, S., Zou, J., Xu, C., An, L., & Zhai, L. (2010). SiCN ceramic fibers with aligned carbon nanotubes. International SAMPE Symposium and Exhibition (Proceedings). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649483096&partnerID=MN8TOARS Allen, R., Lin, K.-C., & Xu, C. (2010). Robust estimation of a maneuvering target from multiple unmanned air vehicles' measurements. 2010 International Symposium on Collaborative Technologies and Systems, CTS 2010, 537–545. https://doi.org/10.1109/CTS.2010.5478465 Sarkar, S., Zou, J., Liu, J., Xu, C., An, L., & Zhai, L. (2010). Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes. ACS Applied Materials and Interfaces, 2(4), 1150–1156. https://doi.org/10.1021/am1000085 Idahosa, U., Saha, A., Xu, C., & Basu, S. (2010). Non-premixed acoustically perturbed swirling flame dynamics. Combustion and Flame, 157(9), 1800–1814. https://doi.org/10.1016/j.combustflame.2010.05.008 Liu, J., Xu, C., & An, L. (2010). Micro-machinable polymer-derived ceramic sensors for high-temperature applications. In M. Tomizuka (Ed.), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010 (Vol. 7647). https://doi.org/10.1117/12.848529 Jiang, T., Hill, A., Fei, W., Wei, Y., Tellam, M., Xu, C., & An, L. (2010). Making bulk ceramics from polymeric precursors. Journal of the American Ceramic Society, 93(10), 3017–3019. https://doi.org/10.1111/j.1551-2916.2010.04069.x Li, J., Liu, J., & Xu, C. (2010). Machinability study of SiC nano-particles reinforced Magnesium nanocomposites during micro-milling processes. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 2, 391–398. https://doi.org/10.1115/MSEC2010-34294 Yang, W., Gao, F., Xu, C., Wei, G., & An, L. (2010). Fabrication of Si3N4/SiC nanocomposites toughened by in-situ formed low-dimensional nanostructures. Solid State Sciences, 12(9), 1692–1695. https://doi.org/10.1016/j.solidstatesciences.2010.07.013 Yang, M., Xu, C., Wu, C., Lin, K.-C., Chao, Y. J., & An, L. (2010). Fabrication of AA6061/Al2O3nano ceramic particle reinforced composite coating by using friction stir processing. Journal of Materials Science, 45(16), 4431–4438. https://doi.org/10.1007/s10853-010-4525-1 Joslin, A., Hernandez, M., Deane, E., Collins, S., Xu, C., & Wilson, D. F. (2010). Experimental setup for multi-sensor fusion and data correlation analysis during CNC steel turning process. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 1, 461–467. https://doi.org/10.1115/MSEC2010-34308 Idahosa, U., Saha, A., Khatami, N., Xu, C., & Basu, S. (2010). Acoustic perturbation effects on the fluid dynamics and swirling flame response in a non-premixed co-flow burner. Proceedings of the ASME Turbo Expo, 2(PARTS A AND B), 1309–1321. https://doi.org/10.1115/GT2010-23735 Tang, Y., & Xu, C. (2010). Online Tool Deflection Compensation in End Milling of Curved Workpiece. International Journal of Electronics, Computing and Engineering Education, 1(1), 23–28. Joslin, A., Hernandez, M., Collins, S., Giesecke, D., Ji, Y., & Xu, C. (2010). Experimental Setup for Multi-sensor Fusion and Data Correlation Analysis during CNC Steel Turning Process. Presented at the ASME International Manufacturing Science and Engineering Conference, Erie, PA. Shao, G., Xu, C., & An, L. (2010). Carbon Nanofiber Reinforced Polymer Derived Ceramic Nanocomposites. Presented at the Materials Science & Technology (MS&T'10), Houston, TX. Howard, A. K. T. (2010). Enhancing student engagement in engineering statics with online tools. ASME 2010 International Mechanical Engineering Congress & Exposition. https://doi.org/10.1115/imece2010-38363 Ferguson, S., Tilstra, A. H., Seepersad, C. C., & Wood, K. L. (2010). Development of a changeable airfoil optimization model for use in the multidisciplinary design of unmanned aerial vehicles. Proceedings of the ASME international design engineering technical conferences and computers and information in engineering conference, vol 5, pts a and b - 35th design automation conference, 57–68. https://doi.org/10.1115/detc2009-87482 Elkhodary, K., Lee, W., Cheeseman, B., Sun, L. P., Brenner, D. W., & Zikry, M. A. (2010). Deformation of precipitate platelets in high strength aluminum alloys under high strain-rate compression. TMS Annual Meeting, 2, 47–52. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-77952596072&partnerID=MN8TOARS York, A., & Seelecke, S. (2010). Towards self-sensing of deap actuators: Capacitive sensing experimental analysis. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 307–314. https://doi.org/10.1115/smasis2010-3847 Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Practical implementation of resistance feedback measurement for position control of a flexible smart inhaler nozzle. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 205–213. https://doi.org/10.1115/smasis2010-3840 Hodgins, M., York, A., & Seelecke, S. (2010). Electro-mechanical analysis of a deap actuator coupled to a negative-rate bias spring mechanism. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 315–322. https://doi.org/10.1115/smasis2010-3849 Hangekar, R., Furst, S., & Seelecke, S. (2010). Development of a 6-channel power controller for simultaneous actuation and resistance measurement of SMA wires. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 461–470. https://doi.org/10.1115/smasis2010-3846 Hackney, D., Webb, S., & Peters, K. (2010). Analysis of fiber Bragg grating spectral features for in-situ assessment of sandwich composites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 813–820. https://doi.org/10.1115/smasis2010-3886 Echekki, T. (Ed.). (2010). Turbulent combustion modeling: Advances, new trends and perspectives. Berlin: Springer Verlag. Kuznetsov, A. V. (2010). The onset of nanofluid bioconvection in a suspension containing both nanoparticles and gyrotactic microorganisms. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(10), 1421–1425. https://doi.org/10.1016/j.icheatmasstransfer.2010.08.015 Kuznetsov, A. V., & Nield, D. A. (2010). The Onset of Double-Diffusive Nanofluid Convection in a Layer of a Saturated Porous Medium. TRANSPORT IN POROUS MEDIA, 85(3), 941–951. https://doi.org/10.1007/s11242-010-9600-1 Nield, D. A., & Kuznetsov, A. V. (2010). The Onset of Convection in a Heterogeneous Porous Medium with Transient Temperature Profile. TRANSPORT IN POROUS MEDIA, 85(3), 691–702. https://doi.org/10.1007/s11242-010-9586-8 Hatem, T. M., & Zikry, M. A. (2010). Deformation and failure of single-packets in martensitic steels. Computers, Materials and Continua, 17(2), 127–147. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78349278902&partnerID=MN8TOARS Brown, J. A., Vendra, L. J., & Rabiei, A. (2010). Bending Properties of Al-Steel and Steel-Steel Composite Metal Foams. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(11), 2784–2793. https://doi.org/10.1007/s11661-010-0343-y Edwards, D. J., & Silverberg, L. M. (2010). Autonomous Soaring: The Montague Cross-Country Challenge. JOURNAL OF AIRCRAFT, 47(5), 1763–1769. https://doi.org/10.2514/1.c000287 Zhao, H., Bradford, P. D., Wang, X., Liu, W., Luo, T. J. M., Jia, Q., … Yuan, F.-G. (2010). An intermetallic Fe-Zr catalyst used for growing long carbon nanotube arrays. MATERIALS LETTERS, 64(18), 1947–1950. https://doi.org/10.1016/j.matlet.2010.05.045 Rabiei, A. (2010, November). Recent developments and the future of bone mimicking: materials for use in biomedical implants. EXPERT REVIEW OF MEDICAL DEVICES, Vol. 7, pp. 727–729. https://doi.org/10.1586/erd.10.51 Lien, J. P., York, A., Fang, T., & Buckner, G. D. (2010). Modeling piezoelectric actuators with Hysteretic Recurrent Neural Networks. SENSORS AND ACTUATORS A-PHYSICAL, 163(2), 516–525. https://doi.org/10.1016/j.sna.2010.08.013 Merchan-Merchan, W., Saveliev, A. V., Jimenez, W. C., & Salkar, G. (2010). Flame synthesis of hybrid nanowires with carbon shells and tungsten-oxide cores. CARBON, 48(15), 4510–4518. https://doi.org/10.1016/j.carbon.2010.08.028 Pawar, S., & Peters, K. (2010). Transient infrared thermography for damage evaluation in aerospace composites. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2010, Vol. 7649. https://doi.org/10.1117/12.847789 Park, C., Peters, K., & Zikry, M. (2010). The Role of Embedded Sensors in Damage Assessment of Composite Laminates. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847634 Song, Y. J., & Peters, K. J. (2010). Self-repairing polymer optical fiber sensor. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847631 Hodgins, M., & Seelecke, S. (2010). Mechanical behavior of a bi-stable negative-rate bias spring system. Behavior and mechanics of multifunctional materials and composites 2010, 7644. Webb, S., Peters, K., Zikry, M. A., Vella, T., Chadderdon, S., Selfridge, R., & Schultz, S. (2010). Impact induced damage assessment in composite laminates through embedded fiber Bragg gratings. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847543 Jiang, X., Snook, K., Liu, R., Geng, X., & Hackenberger, W. S. (2010). Fabrication and Characterization of High Frequency Phased Arrays for NDE Imaging. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2010, Vol. 7649. https://doi.org/10.1117/12.847624 Hackney, D. A., & Peters, K. J. (2010). Embedded fiber Bragg sensors for damage identification in sandwich composites after impact. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.848351 Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Development, Assembly, and Validation of an SMA-Actuated 2-Joint Nozzle and 6-Channel Power Supply for Use in a Smart Inhaler System. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2010, PTS 1 AND 2, Vol. 7643. https://doi.org/10.1117/12.853399 Fang, T., Zhang, J., & Yao, S. (2010). A new family of unsteady boundary layers over a stretching surface. APPLIED MATHEMATICS AND COMPUTATION, 217(8), 3747–3755. https://doi.org/10.1016/j.amc.2010.09.031 Fang, T., & Aziz, A. (2010). Viscous Flow with Second-Order Slip Velocity over a Stretching Sheet. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES, 65(12), 1087–1092. https://doi.org/10.1515/zna-2010-1212 Park, C., Peters, K., & Zikry, M. (2010). The Effects of Embedded Optical Fiber Density on the Impact Response and Lifetime of Laminated Composites. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 21(18), 1819–1829. https://doi.org/10.1177/1045389x10390250 Tie-Gang, F., Ji, Z., & Shan-Shan, Y. (2010). Slip Magnetohydrodynamic Viscous Flow over a Permeable Shrinking Sheet. CHINESE PHYSICS LETTERS, 27(12). https://doi.org/10.1088/0256-307x/27/12/124702 Pantokratoras, A., & Fang, T. (2010). FLOW ADJACENT TO A FLAT PLATE IN A DARCY-BRINKMAN POROUS MEDIUM OSCILLATING WITH ARBITRARY PERIODIC OSCILLATION. JOURNAL OF POROUS MEDIA, 13(8), 759–763. https://doi.org/10.1615/jpormedia.v13.i8.70 June, M. S., Kribs, J., & Lyons, K. M. (2010). Efficiency of electrostatic air moving devices. JOURNAL OF ELECTROSTATICS, 68(5), 419–423. https://doi.org/10.1016/j.elstat.2010.06.001 Ward, T. (2010). Capillary-pressure driven adhesion of rigid-planar surfaces. Journal of Colloid and Interface Science, 354(2), 816–824. Bradford, P. D., Wang, X., Zhao, H., Maria, J.-P., Jia, Q., & Zhu, Y. T. (2010). A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes. COMPOSITES SCIENCE AND TECHNOLOGY, 70(13), 1980–1985. https://doi.org/10.1016/j.compscitech.2010.07.020 Coppe, A., Haftka, R. T., Kim, N. H., & Yuan, F.-G. (2010). Uncertainty Reduction of Damage Growth Properties Using Structural Health Monitoring. JOURNAL OF AIRCRAFT, Vol. 47, pp. 2030–2038. https://doi.org/10.2514/1.c000279 Nield, D. A., & Kuznetsov, A. V. (2010). The onset of convection in a horizontal nanofluid layer of finite depth. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 29(3), 217–223. https://doi.org/10.1016/j.euromechflu.2010.02.003 Nield, D. A., & Kuznetsov, A. V. (2010). The Onset of Convection in a Layer of Cellular Porous Material: Effect of Temperature-Dependent Conductivity Arising From Radiative Transfer. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 132(7). https://doi.org/10.1115/1.4001125 Yang, C., & Ngaile, G. (2010). Preform design for forging and extrusion processes based on geometrical resemblance. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 224(B9), 1409–1423. https://doi.org/10.1243/09544054jem1799 Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). MODELING TRAFFIC JAMS IN SLOW AXONAL TRANSPORT. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 10(3), 445–465. https://doi.org/10.1142/s0219519410003502 Luo, H., Spiegel, S., & Loehner, R. (2010, November). Hybrid Grid Generation Method for Complex Geometries. AIAA JOURNAL, Vol. 48, pp. 2639–2647. https://doi.org/10.2514/1.j050491 Kuznetsov, A. V. (2010). Effect of the degree of polar mismatching on traffic jam formation in fast axonal transport. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 13(6), 711–722. https://doi.org/10.1080/10255840903505154 Simmons, C. T., Kuznetsov, A. V., & Nield, D. A. (2010). Effect of strong heterogeneity on the onset of convection in a porous medium: Importance of spatial dimensionality and geologic controls. WATER RESOURCES RESEARCH, 46. https://doi.org/10.1029/2009wr008606 Kuznetsov, A. V., & Nield, D. A. (2010). Effect of Local Thermal Non-equilibrium on the Onset of Convection in a Porous Medium Layer Saturated by a Nanofluid. TRANSPORT IN POROUS MEDIA, 83(2), 425–436. https://doi.org/10.1007/s11242-009-9452-8 Ward, T., Faivre, M., & Stone, H. A. (2010). Drop production and tip-streaming phenomenon in a microfluidic flow-focusing device via an interfacial chemical reaction. Langmuir, 26(12), 9233–9239. Lane, B. M., Shi, M., Dow, T. A., & Scattergood, R. (2010). Diamond tool wear when machining Al6061 and 1215 steel. WEAR, 268(11-12), 1434–1441. https://doi.org/10.1016/j.wear.2010.02.019 Kuznetsov, A. V. (2010). Comparison of active transport in neuronal axons and dendrites. MATHEMATICAL BIOSCIENCES, 228(2), 195–202. https://doi.org/10.1016/j.mbs.2010.10.003 Ramasubramanian, M. K., Shiffler, D. A., & Jayachandran, A. (2010). A computational fluid dynamics modeling and experimental study of the mixing process for dispersion of synthetic fibers in wet-lay forming. TAPPI Journal, 9(3), 6–13. Cai, X., & Wu, F. (2010). Robust parameter-dependent fault-tolerant control for actuator and sensor faults. INTERNATIONAL JOURNAL OF CONTROL, 83(7), 1475–1484. https://doi.org/10.1080/00207179.2010.481024 Feng, Y., & Kleinstreuer, C. (2010). Nanofluid convective heat transfer in a parallel-disk system. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(21-22), 4619–4628. https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.031 Geng, T., Zheng, F., Kuznetsov, A. V., Roberts, W. L., & Paxson, D. E. (2010). Comparison Between Numerically Simulated and Experimentally Measured Flowfield Quantities Behind a Pulsejet. FLOW TURBULENCE AND COMBUSTION, 84(4), 653–667. https://doi.org/10.1007/s10494-010-9247-6 Avramenko, A. A., & Kuznetsov, A. V. (2010). Bio-thermal convection caused by combined effects of swimming of oxytactic bacteria and inclined temperature gradient in a shallow fluid layer. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 20(2), 157–173. https://doi.org/10.1108/09615531011016939 Fang, T., & Zhong, Y. (2010). Viscous flow over a shrinking sheet with an arbitrary surface velocity. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 15(12), 3768–3776. https://doi.org/10.1016/j.cnsns.2010.01.034 Vasudeo, N., Echekki, T., Day, M. S., & Bell, J. B. (2010). The regime diagram for premixed flame kernel-vortex interactions-Revisited. PHYSICS OF FLUIDS, 22(4). https://doi.org/10.1063/1.3372167 Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Tension-compression asymmetry in nanocrystalline Cu: High strain rate vs. quasi-static deformation. COMPUTATIONAL MATERIALS SCIENCE, 49(2), 260–265. https://doi.org/10.1016/j.commatsci.2010.05.004 Cai, X., & Wu, F. (2010). Robust fault detection and isolation for parameter-dependent LFT systems. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 20(7), 764–776. https://doi.org/10.1002/rnc.1468 Merchan-Merchan, W., Saveliev, A. V., & Cuello-Jimenez, W. (2010). Novel flame-gradient method for synthesis of metal-oxide channels, nanowires and nanorods. JOURNAL OF EXPERIMENTAL NANOSCIENCE, 5(3), 199–212. https://doi.org/10.1080/17458080903464108 Kuznetsov, A. V. (2010). Modeling organelle transport in branching dendrites with a variable cross-sectional area. Journal of Biological Physics, 36(4), 385–403. https://doi.org/10.1007/s10867-010-9191-7 Wu, M., Kuznetsov, A. V., & Jasper, W. J. (2010). Modeling of particle trajectories in an electrostatically charged channel. PHYSICS OF FLUIDS, 22(4). https://doi.org/10.1063/1.3369004 Shenoy, A. R., & Kleinstreuer, C. (2010). Influence of aspect ratio on the dynamics of a freely moving circular disk. JOURNAL OF FLUID MECHANICS, 653, 463–487. https://doi.org/10.1017/s0022112010000418 Kuznetsov, A. V. (2010). Effect of vesicle traps on traffic jam formation in fast axonal transport. MATHEMATICAL BIOSCIENCES, 226(2), 147–155. https://doi.org/10.1016/j.mbs.2010.05.003 Shi, M., Lane, B., Mooney, C. B., Dow, T. A., & Scattergood, R. O. (2010). Diamond tool wear measurement by electron-beam-induced deposition. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721. https://doi.org/10.1016/j.precisioneng.2010.03.009 Yang, Y., Xiang, P., Kong, J., & Zhou, H. (2010, June). A GPGPU Compiler for Memory Optimization and Parallelism Management. ACM SIGPLAN NOTICES, Vol. 45, pp. 86–97. https://doi.org/10.1145/1809028.1806606 Barlaz, M. A., Bareither, C. A., Hossain, A., Saquing, J., Mezzari, I., Benson, C. H., … Yazdani, R. (2010, August). Performance of North American Bioreactor Landfills. II: Chemical and Biological Characteristics. JOURNAL OF ENVIRONMENTAL ENGINEERING, Vol. 136, pp. 839–853. https://doi.org/10.1061/(asce)ee.1943-7870.0000220 Ma, T. F., Zhang, C., Feng, G. P., & Jiang, X. N. (2010). Lateral field excitation properties of langasite single crystal. Chinese Physics. B, (Beijing, China), 19(8). https://doi.org/10.1088/1674-1056/19/8/087701 Boles, J. A., Edwards, J. R., & Baurle, R. A. (2010). Large-Eddy/Reynolds-Averaged Navier-Stokes Simulations of Sonic Injection into Mach 2 Crossflow. AIAA JOURNAL, 48(7), 1444–1456. https://doi.org/10.2514/1.j050066 Chen, C., & Yuan, F.-G. (2010). Impact source identification in finite isotropic plates using a time-reversal method: theoretical study. SMART MATERIALS AND STRUCTURES, 19(10). https://doi.org/10.1088/0964-1726/19/10/105028 Vella, T., Chadderdon, S., Selfridge, R., Schultz, S., Webb, S., Park, C., … Zikry, M. (2010, September). Full-spectrum interrogation of fiber Bragg gratings at 100 kHz for detection of impact loading. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 21. https://doi.org/10.1088/0957-0233/21/9/094009 Kuznetsov, A. V., & Nield, D. A. (2010). Forced convection in a channel partly occupied by a bidisperse porous medium: Asymmetric case. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(23-24), 5167–5175. https://doi.org/10.1016/j.ijheatmasstransfer.2010.07.046 Zhao, B. Q., Pantokratoras, A., Fang, T. G., & Liao, S. J. (2010). Flow of a Weakly Conducting Fluid in a Channel Filled with a Darcy-Brinkman-Forchheimer Porous Medium. TRANSPORT IN POROUS MEDIA, 85(1), 131–142. https://doi.org/10.1007/s11242-010-9550-7 Cox, C., Gopalarathnam, A., & Hall, C. E., Jr. (2010). Flight Test of Stable Automated Cruise Flap for an Adaptive Wing Aircraft. Journal of Aircraft, 47(4), 1178–1188. https://doi.org/10.2514/1.46789 Nield, D. A., & Kuznetsov, A. V. (2010). FORCED CONVECTION WITH PHASE-LAGGED OSCILLATORY COUNTERFLOW IN A SATURATED POROUS CHANNEL. JOURNAL OF POROUS MEDIA, 13(7), 601–611. https://doi.org/10.1615/jpormedia.v13.i7.20 Merchan-Merchan, W., Saveliev, A. V., Kennedy, L., & Jimenez, W. C. (2010). [Review of Combustion synthesis of carbon nanotubes and related nanostructures]. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 36(6), 696–727. https://doi.org/10.1016/j.pecs.2010.02.005 Guan, C., & Zhu, Y. (2010). An electrothermal microactuator with Z-shaped beams. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 20(8). https://doi.org/10.1088/0960-1317/20/8/085014 Luo, H., Luo, L., Nourgaliev, R., Mousseau, V. A., & Dinh, N. (2010). A reconstructed discontinuous Galerkin method for the compressible Navier-Stokes equations on arbitrary grids. JOURNAL OF COMPUTATIONAL PHYSICS, 229(19), 6961–6978. https://doi.org/10.1016/j.jcp.2010.05.033 Pantokratoras, A., & Fang, T. G. (2010). cox regression in nested case-control studies with auxiliary covariates. Transport in Porous Media, 83(3), 667–676. Wang, Y. M., Lin, J. Z., & Feng, Y. (2010). The central oblique collision efficiency of spherical nanoparticles in the brownian coagulation. Modern Physics Letters. B, Condensed Matter Physics, Statistical Physics, Applied Physics, 24(14), 1523–1531. Nield, D. A., Kuznetsov, A. V., & Simmons, C. T. (2010). The Effect of Strong Heterogeneity on the Onset of Convection in a Porous Medium: 2D/3D Localization and Spatially Correlated Random Permeability Fields. TRANSPORT IN POROUS MEDIA, 83(3), 465–477. https://doi.org/10.1007/s11242-009-9455-5 Wei, W., Nori, S., Jin, C., Narayan, J., Narayan, R. J., Ponarin, D., & Smirnov, A. (2010). Mott transition in Ga-doped MgxZn1-xO: A direct observation. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 171(1-3), 90–92. https://doi.org/10.1016/j.mseb.2010.03.078 Moore, N. J., & Lyons, K. M. (2010). Leading-edge flame fluctuations in lifted turbulent flames. Combustion Science and Technology, 182(7), 777–793. https://doi.org/10.1080/00102200903355017 Paleocrassas, A. G., & Tu, J. F. (2010). Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 210(10), 1411–1418. https://doi.org/10.1016/j.jmatprotec.2010.04.002 Jiang, G., Dawood, M., Peters, K., & Rizkalla, S. (2010). Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 9(4), 309–322. https://doi.org/10.1177/1475921709352989 York, A., Dunn, J., & Seelecke, S. (2010, September). Experimental characterization of the hysteretic and rate-dependent electromechanical behavior of dielectric electro-active polymer actuators. SMART MATERIALS & STRUCTURES, Vol. 19. https://doi.org/10.1088/0964-1726/19/9/094014 Kuznetsov, A. V. (2010). Equations describing molecular-motor-assisted transport in dendrites with a non-uniform cross-sectional area. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(7), 725–730. https://doi.org/10.1016/j.icheatmasstransfer.2010.05.020 Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). Effect of diffusion on slowing the velocity of a bell-shaped wave in slow axonal transport. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(7), 770–774. https://doi.org/10.1016/j.icheatmasstransfer.2010.05.010 Hatem, T. M., & Zikry, M. A. (2010). Dynamic shear-strain localization and inclusion effects in lath martensitic steels subjected to high pressure loads. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 58(8), 1057–1072. https://doi.org/10.1016/j.jmps.2010.04.009 Hartl, A. E., & Mazzoleni, A. P. (2010). Dynamic Modeling of a Wind-Driven Tumbleweed Rover Including Atmospheric Effects. JOURNAL OF SPACECRAFT AND ROCKETS, 47(3), 493–502. https://doi.org/10.2514/1.45174 Mal, S., Narayan, J., Nori, S., Prater, J. T., & Kumar, D. (2010). Defect-mediated room temperature ferromagnetism in zinc oxide. SOLID STATE COMMUNICATIONS, 150(35-36), 1660–1664. https://doi.org/10.1016/j.ssc.2010.06.030 Zhao, H., Zhang, Y., Bradford, P. D., Zhou, Q., Jia, Q., Yuan, F.-G., & Zhu, Y. (2010). Carbon nanotube yarn strain sensors. NANOTECHNOLOGY, 21(30). https://doi.org/10.1088/0957-4484/21/30/305502 Lynch, C., Brei, D., Chaplya, P., Ounaies, Z., Kamlah, M., Seelecke, S., … Weiland, L. (2010). Adaptive and active materials: Selected papers from the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 09) (Oxnard, CA, USA, 21-23 September 2009). Smart Materials & Structures, 19(9). Fang, T., Yao, S., Zhang, J., & Aziz, A. (2010). Viscous flow over a shrinking sheet with a second order slip flow model. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 15(7), 1831–1842. https://doi.org/10.1016/j.cnsns.2009.07.017 Kuznetsov, A. V., & Nield, D. A. (2010). The Cheng-Minkowycz problem for cellular porous materials: Effect of temperature-dependent conductivity arising from radiative transfer. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(13-14), 2676–2679. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.042 Kuznetsov, A. V., & Nield, D. A. (2010). Natural convective boundary-layer flow of a nanofluid past a vertical plate. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 49(2), 243–247. https://doi.org/10.1016/j.ijthermalsci.2009.07.015 Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). Modeling the effect of a microtubule swirl on fast axonal transport. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(3), 234–238. https://doi.org/10.1016/j.icheatmasstransfer.2009.11.005 Bai, X., More, K., Rouleau, C. M., & Rabiei, A. (2010). Functionally graded hydroxyapatite coatings doped with antibacterial components. ACTA BIOMATERIALIA, 6(6), 2264–2273. https://doi.org/10.1016/j.actbio.2009.12.002 Nield, D. A., & Kuznetsov, A. V. (2010). Forced convection in cellular porous materials: Effect of temperature-dependent conductivity arising from radiative transfer. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(13-14), 2680–2684. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.041 Crasta, M., Clode, A. B., McMullen, R. J., Jr., Pate, D. O., & Gilger, B. C. (2010). Effect of three treatment protocols on acute ocular hypertension after phacoemulsification and aspiration of cataracts in dogs. VETERINARY OPHTHALMOLOGY, 13(1), 14–19. https://doi.org/10.1111/j.1463-5224.2009.00748.x Kuznetsov, A. V. (2010). Effect of the width of regions with severed microtubules on transport of organelles down the axon. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(5), 443–448. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.008 Propst, A., Peters, K., Zikry, M. A., Schultz, S., Kunzler, W., Zhu, Z., … Selfridge, R. (2010). Assessment of damage in composite laminates through dynamic, full-spectral interrogation of fiber Bragg grating sensors. SMART MATERIALS AND STRUCTURES, 19(1). https://doi.org/10.1088/0964-1726/19/1/015016 Aziz, A., & Fang, T. (2010). Alternative solutions for longitudinal fins of rectangular, trapezoidal, and concave parabolic profiles. Energy Conversion and Management, 51(11), 2188–2194. https://doi.org/10.1016/j.enconman.2010.03.012 Liu, L., & Yuan, F. G. (2010). A Linear Mapping Technique for Dispersion Removal of Lamb Waves. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 9(1), 75–86. https://doi.org/10.1177/1475921709341012 Ghosh, S., Choi, J.-I., & Edwards, J. R. (2010). Simulation of Shock/Boundary-Layer Interactions with Bleed Using Immersed-Boundary Methods. JOURNAL OF PROPULSION AND POWER, Vol. 26, pp. 203–214. https://doi.org/10.2514/1.45297 Joshi, S., & Peters, K. (2010, February). SMASIS Symposium on Structural Health Monitoring Preface. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 21, pp. 223–223. https://doi.org/10.1177/1045389x09359109 Kennedy, A. S., & Salem, R. (2010). [Review of Radioembolization (yttrium-90 microspheres) for primary and metastatic hepatic malignancies]. Cancer Journal, 16(2), 163–175. Park, C., Peters, K., Zikry, M., Haber, T., Schultz, S., & Selfridge, R. (2010). Peak wavelength interrogation of fiber Bragg grating sensors during impact events. SMART MATERIALS AND STRUCTURES, 19(4). https://doi.org/10.1088/0964-1726/19/4/045015 Oberoi, R. C., Choi, J.-I., Edwards, J. R., Rosati, J. A., Thornburg, J., & Rodes, C. E. (2010). Human-Induced Particle Re-Suspension in a Room. AEROSOL SCIENCE AND TECHNOLOGY, 44(3), 216–229. https://doi.org/10.1080/02786820903530852 Ingle, N. P., King, M. W., & Zikry, M. A. (2010). Finite element analysis of barbed sutures in skin and tendon tissues. JOURNAL OF BIOMECHANICS, 43(5), 879–886. https://doi.org/10.1016/j.jbiomech.2009.11.012 Jernigan, S. R., Chanoit, G., Veeramani, A., Owen, S. B., Hilliard, M., Cormier, D., … Buckner, G. (2010). A laparoscopic knot-tying device for minimally invasive cardiac surgery☆. European Journal of Cardio-Thoracic Surgery, 37(3), 626–630. https://doi.org/10.1016/j.ejcts.2009.09.024 Avramenko, A. A., & Kuznetsov, A. V. (2010). The onset of bio-thermal convection in a suspension of gyrotactic microorganisms in a fluid layer with an inclined temperature gradient. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 20(1), 111–129. https://doi.org/10.1108/09615531011008154 Nield, D. A., & Kuznetsov, A. V. (2010). The effect of local thermal nonequilibrium on the onset of convection in a nanofluid. Journal of Heat Transfer, 132(5). https://doi.org/10.1115/1.4000474 Keistler, P. G., & Hassan, H. A. (2010, January). Simulation of Supersonic Combustion Involving H-2/Air and C2H4/Air. AIAA JOURNAL, Vol. 48, pp. 166–173. https://doi.org/10.2514/1.43213 Grunewald, N., Levy, R., Mata, M., Ward, T., & Bertozzi, A. L. (2010). Self-similarity in particle-laden flows at constant volume. Journal of Engineering Mathematics, 66(1-3), 53–63. Ghosh, S., Choi, J.-I., & Edwards, J. R. (2010, January). Numerical Simulations of Effects of Micro Vortex Generators Using Immersed-Boundary Methods. AIAA JOURNAL, Vol. 48, pp. 92–103. https://doi.org/10.2514/1.40049 Xu, F., Qin, Q., Mishra, A., Gu, Y., & Zhu, Y. (2010). Mechanical Properties of ZnO Nanowires Under Different Loading Modes. NANO RESEARCH, 3(4), 271–280. https://doi.org/10.1007/s12274-010-1030-4 Baurle, R. A., & Edwards, J. R. (2010, March). Hybrid Reynolds-Averaged/Large-Eddy Simulations of a Coaxial Supersonic Freejet Experiment. AIAA JOURNAL, Vol. 48, pp. 551–571. https://doi.org/10.2514/1.43771 Furst, S. J., Dow, T. A., Garrard, K., & Sohn, A. (2010). Automated Part Centering With Impulse Actuation. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 132(1). https://doi.org/10.1115/1.4000681 Kleinstreuer, C., & Zhang, Z. (2010). Airflow and Particle Transport in the Human Respiratory System. ANNUAL REVIEW OF FLUID MECHANICS, Vol. 42, pp. 301–334. https://doi.org/10.1146/annurev-fluid-121108-145453 Kuznetsov, A. V., & Nield, D. A. (2010). Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid: Brinkman Model. TRANSPORT IN POROUS MEDIA, 81(3), 409–422. https://doi.org/10.1007/s11242-009-9413-2 Wu, C., Mosher, B. P., Lyons, K., & Zeng, T. (2010). Reducing Ability and Mechanism for Polyvinylpyrrolidone (PVP) in Silver Nanoparticles Synthesis. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 10(4), 2342–2347. https://doi.org/10.1166/jnn.2010.1915 Basciano, C. A., Kleinstreuer, C., Kennedy, A. S., Dezarn, W. A., & Childress, E. (2010). Computer Modeling of Controlled Microsphere Release and Targeting in a Representative Hepatic Artery System. ANNALS OF BIOMEDICAL ENGINEERING, 38(5), 1862–1879. https://doi.org/10.1007/s10439-010-9955-z Rabiei, A. (2010). Composite metal foam and methods of preparation thereof. Kennedy, A. S., Kleinstreuer, C., Basciano, C. A., & Dezarn, W. A. (2010). COMPUTER MODELING OF YTTRIUM-90-MICROSPHERE TRANSPORT IN THE HEPATIC ARTERIAL TREE TO IMPROVE CLINICAL OUTCOMES. INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS, 76(2), 631–637. https://doi.org/10.1016/j.ijrobp.2009.06.069 Xu, S., Bourham, M., & Rabiei, A. (2010). A novel ultra-light structure for radiation shielding. MATERIALS & DESIGN, 31(4), 2140–2146. https://doi.org/10.1016/j.matdes.2009.11.011 Kuznetsov, A. V., Nield, D. A., & Simmons, C. T. (2010). The Effect of Strong Heterogeneity on the Onset of Convection in a Porous Medium: Periodic and Localized Variation. TRANSPORT IN POROUS MEDIA, 81(1), 123–139. https://doi.org/10.1007/s11242-009-9390-5 Zhu, Y., Qin, Q., Gu, Y., & Wang, Z. L. (2010). Friction and Shear Strength at the Nanowire-Substrate Interfaces. NANOSCALE RESEARCH LETTERS, 5(2), 291–295. https://doi.org/10.1007/s11671-009-9478-4 Vendra, L., & Rabiei, A. (2010). Evaluation of modulus of elasticity of composite metal foams by experimental and numerical techniques. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(7-8), 1784–1790. https://doi.org/10.1016/j.msea.2009.11.004 Dongare, A. M., Rajendran, A. M., Lamattina, B., Brenner, D. W., & Zikry, M. A. (2010). Atomic-Scale Study of Plastic-Yield Criterion in Nanocrystalline Cu at High Strain Rates. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(2), 523–531. https://doi.org/10.1007/s11661-009-0113-x