Mechanical and Aerospace Engineering - 1998

Du, H., Ekkad, S. V., & Han, J.-C. (1998). Effect of unsteady wake with trailing edge coolant ejection on film cooling performance for a gas turbine blade. Proceedings of the ASME Turbo Expo, 4(GT). https://doi.org/10.1115/98-GT-259

Du, H., Han, J. C., & Ekkad, S. V. (1998). Effect of unsteady wake on detailed heat transfer coefficient and film effectiveness distributions for a gas turbine blade. Journal of Turbomachinery, 120(4), 808–817. https://doi.org/10.1115/1.2841793

Mehendale, A. B., Jiang, H. W., Ekkad, S. V., & Han, J.-C. (1998). Effect of film injection location on local heat transfer coefficient on a gas turbine blade. International Journal of Rotating Machinery, 4(3), 163–174. https://doi.org/10.1155/S1023621X98000141

Ekkad, S. V., Huang, Y., & Han, J.-C. (1998). Detailed heat transfer distributions in two-pass square channels with rib turbulators and bleed holes. International Journal of Heat and Mass Transfer, 41(23), 3781–3791. https://doi.org/10.1016/S0017-9310(98)00099-4

Ekkad, S. V., Han, J. C., & Du, H. (1998). Detailed film cooling measurements on a cylindrical leading edge model: Effect of free-stream turbulence and coolant density. Journal of Turbomachinery, 120(4), 799–807. https://doi.org/10.1115/1.2841792

Huang, Y., Ekkad, S. V., & Han, J.-C. (1998). Detailed heat transfer distributions under an array of orthogonal impinging jets. Journal of Thermophysics and Heat Transfer, 12(1), 73–79. https://doi.org/10.2514/2.6304

Ekkad, S. V., Krishna, A., & Han, J. C. (1998). Detailed film cooling measurements on a cylindrical model with simulated TBC spallation. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 357(4), 69–76. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-12844285293&partnerID=MN8TOARS

Zamankhan, P., Tafreshi, H. V., Polashenski, W., Jr., Sarkomaa, P., & Hyndman, C. L. (1998). Shear induced diffusive mixing in simulations of dense Couette flow of rough, inelastic hard spheres. The Journal of Chemical Physics, 109(11), 4487–4491. https://doi.org/10.1063/1.477076

Zamankhan, P., Polashenski, W., Tafreshi, H. V., Shakib Manesh, A., & Sarkomaa, P. J. (1998). Shear-induced particle diffusion in inelastic hard sphere fluids. Physical Review E, 58(5), R5237–R5240. https://doi.org/10.1103/physreve.58.r5237

Bond-orientational order in sheared dense flows of inelastic hard spheres. (1998). Applied Physics Letters, 73(4), 450–452. https://doi.org/10.1063/1.121896

Eischen, J. W. (1998). Computer Modeling of Fabric Drape. Proceedings of the 35th Annual Society of Engineering Science Conference. Presented at the 35th Annual Society of Engineering Science Conference, Pullman, WA.

Eischen, J. W. (1998). Drape Modeling of Cloth. Course 31- Cloth and Clothing in Computer Graphics. Short Course notes presented at the 1998 SIGGRAPH Computer Graphics Conference.

Reyhanoglu, M., Cho, S., McClamroch, N. H., & Kolmanovsky, I. (1998). Discontinuous feedback control of a planar rigid body with an unactuated degree of freedom. Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171). Presented at the 37th IEEE Conference on Decision and Control, Tampa, FL. https://doi.org/10.1109/cdc.1998.760714

McClamroch, N. H., Rui, C., Kolmanovsky, I., Cho, S., & Reyhanoglu, M. (1998). Control problems for planar motion of a rigid body with an unactuated internal degree of freedom. Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207). Presented at the Proceedings of the 1998 American Control Conference (ACC). https://doi.org/10.1109/acc.1998.694665

Escobar, G., Ortega, R., & Reyhanoglu, M. (1998). Regulation and tracking of the nonholonomic double integrator: A field-oriented control approach. Automatica, 34(1), 125–131. https://doi.org/10.1016/s0005-1098(97)00155-6

Löhner, R., Baum, J. D., Yang, C., & Luo, H. (1998). THE NUMERICAL SIMULATION OF STRONGLY UNSTEADY FLOW WITH HUNDREDS OF MOVING BODIES. In Computational Fluid Dynamics Review 1998 (pp. 1027–1033). https://doi.org/10.1142/9789812812957_0056

Gray, G. L., Mazzoleni, A. P., & Campbell, D. R., III. (1998). Analytical Criterion for Chaotic Dynamics in Flexible Satellites with Nonlinear Controller Damping. Journal of Guidance, Control, and Dynamics, 21(4), 558–565. https://doi.org/10.2514/2.4294

Gopalarathnam, A., & Selig, M. S. (1998). Multipoint Inverse Method for Multielement Airfoil Design. Journal of Aircraft, 35(3), 398–404. https://doi.org/10.2514/2.2337

Echekki, T., & Chen, J. H. (1998). Structure and propagation of methanol-air triple flames. Combustion and Flame, 114(1-2), 231–245. https://doi.org/10.1016/S0010-2180(97)00287-3

Peters, N., Terhoeven, P., Chen, J. H., & Echekki, T. (1998). Statistics of flame displacement speeds from computations of 2-D unsteady methane-air flames. Symposium (International) on Combustion, 27(1), 833–839. https://doi.org/10.1016/S0082-0784(98)80479-7

Luo, H., Baum, J. D., & Lohner, R. (1998). A fast, matrix-free implicit method for compressible flows on unstructured grids. JOURNAL OF COMPUTATIONAL PHYSICS, 146(2), 664–690. https://doi.org/10.1006/jcph.1998.6076

Drayton, M. K., Saveliev, A. V., Kennedy, L. A., Fridman, A. A., & Li, Y.-E. (1998). Syngas production using superadiabatic combustion of ultra-rich methane-air mixtures. Symposium (International) on Combustion, 27(1), 1361–1367. https://doi.org/10.1016/s0082-0784(98)80541-9

Mutaf-Yardimci, O., Saveliev, A. V., Fridman, A. A., & Kennedy, L. A. (1998). Employing plasma as catalyst in hydrogen production. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 23(12), 1109–1111. https://doi.org/10.1016/s0360-3199(98)00005-6

Cengel, Y. A., & Boles, M. A. (1998). Thermodynamics: an engineering approach. (3rd ed.). Boston: McGraw-Hill.

Kuznetsov, A. V. (1998). Analytical study of fluid flow and heat transfer during forced convection in a composite channel partly filled with a Brinkman-Forchheimer porous medium. FLOW TURBULENCE AND COMBUSTION, 60(2), 173–192. https://doi.org/10.1023/A:1009998703180

Warren, E. S., & Hassan, H. A. (1998). Transition closure model for predicting transition onset. JOURNAL OF AIRCRAFT, 35(5), 769–775. https://doi.org/10.2514/2.2368

Athavale, S. M., & Strenkowski, J. S. (1998). Finite element modeling of machining: From proof-of-concept to engineering applications. MACHINING SCIENCE AND TECHNOLOGY, 2(2), 317–342. https://doi.org/10.1080/10940349808945674

Robinson, D. F., & Hassan, H. A. (1998). Two-equation turbulence closure model for wall bounded and free shear flows. AIAA JOURNAL, 36(1), 109–111. https://doi.org/10.2514/2.360

Gutierrez, H. M., & Po, P. I. (1998). Sliding-mode control of a nonlinear-input system: Application to a magnetically levitated fast-tool servo. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 45(6), 921–927. https://doi.org/10.1109/41.735336

Buchanan, JR, & Kleinstreuer, C. (1998). Simulation of particle-hemodynamics in a partially occluded artery segment with implications to the initiation of microemboli and secondary stenoses. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 120(4), 446–454. https://doi.org/10.1115/1.2798013

Keltie, R. F. (1998). Signal response of elastically coated plates. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 103(4), 1855–1863. https://doi.org/10.1121/1.421336

Nance, R. P., Hash, D. B., & Hassan, H. A. (1998). Role of boundary conditions in Monte Carlo simulation of microelectromechanical systems. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 12, pp. 447–449. https://doi.org/10.2514/2.6358

Tu, J. F., Corless, M., Gehrich, M. J., & Shih, A. J. (1998). Experimental study of a precision, hydrodynamic wheel spindle for submicron cylindrical grinding. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 22(1), 43–57. https://doi.org/10.1016/S0141-6359(98)00003-8

Arcona, C., & Dow, T. A. (1998). An empirical tool force model for precision machining. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 120(4), 700–707. https://doi.org/10.1115/1.2830209

Warren, E. W., & Hassan, H. A. (1998). Alternative to the e(n) method for determining onset of transition. AIAA JOURNAL, 36(1), 111–113. https://doi.org/10.2514/2.361

Franzoni, L. P., & Bliss, D. B. (1998). A discussion of modal uncoupling and an approximate closed-form solution for weakly coupled systems with application to acoustics. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 103(4), 1923–1932. https://doi.org/10.1121/1.421344

Yuan, F. G., & Hsieh, C. C. (1998). Three-dimensional wave propagation in composite cylindrical shells. COMPOSITE STRUCTURES, 42(2), 153–167. https://doi.org/10.1016/S0263-8223(98)00063-4

Zikry, M. A., & Garmestani, H. (1998). Special issue: Deformation and failure modes in multiphase materials. International Journal of Plasticity, 14(8), 671.

Gutierrez, H. M., & Ro, P. I. (1998). Parametric modeling and control of a long-range actuator using magnetic servo levitation. IEEE TRANSACTIONS ON MAGNETICS, 34(5), 3689–3695. https://doi.org/10.1109/20.718530

Robinson, D. F., & Hassan, H. A. (1998). Further development of the k-zeta (enstrophy) turbulence closure model. AIAA JOURNAL, 36(10), 1825–1833. https://doi.org/10.2514/2.298

Benedict, L. H., & Gould, R. D. (1998). Concerning time and length scale estimates made from burst-mode LDA autocorrelation measurements. EXPERIMENTS IN FLUIDS, 24(3), 246–253. https://doi.org/10.1007/s003480050171

Shih, A. J., Yonushonis, T. M., Grant, M. B., Morris, T. O., & McSpadden, S. B. (1998). Vitreous bond CBN wheel for high speed grinding of ceramic and M2 steel. Transaction of 26th NAMRC (North American Manufacturing Research Conference), 1998, (1998), 195–200.

Wang, H. L., Eischen, J. W., & Silverberg, L. M. (1998). On control and optimization of elastic multilink mechanisms. COMPUTERS & STRUCTURES, 67(6), 483–502. https://doi.org/10.1016/s0045-7949(98)00060-1

Kameda, T., & Zikry, M. A. (1998). Intergranular and transgranular crack growth at triple junction boundaries in ordered intermetallics. INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 14, pp. 689–702. https://doi.org/10.1016/S0749-6419(98)00017-5

Zikry, M. A., & Kameda, T. (1998, May). Inelastic three dimensional high strain-rate dislocation density based analysis of grain-boundary effects and failure modes in ordered intermetallics. MECHANICS OF MATERIALS, Vol. 28, pp. 93–102. https://doi.org/10.1016/S0167-6636(97)00026-4

Shih, A. J., Yonushonis, T. M., Grant, M. B., Morris, T. O., & McSpadden, S. B. (1998). High speed and high material removal rate grinding of ceramics using the vitreous bond CBN wheel. ASPE 13th annual meeting, St. Louis, MO, Oct. 25-30, 1998, (1998), 25–30.

Buchanan, C. D., Kleinstreuer, C., & Longest, P. W. (1998). Analytical solution to flux enhancement in laminar concentrically stratified pipe flow of Bingham and Newtonian fluids. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 120(3), 629–631. https://doi.org/10.1115/1.2820711

LaMattina, B., Klang, E. C., & Eischen, J. W. (1998). A study of solutions for the anisotropic plate subjected to a concentrated force. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 65(1), 273–276. https://doi.org/10.1115/1.2789039

Yih, C. C., & Ro, P. I. (1998). Nonlinear optimization-based motion planning of nonholonomic systems using an iterative algorithm. Intelligent Automation and Soft Computing, 4(3), 227–239. https://doi.org/10.1080/10798587.1998.10750733

Kato, C., & Bailey, J. A. (1998). Wear characteristics of a woodworking knife with a vanadium carbide coating only on the clearance surface (back surface). ADVANCED CERAMIC TOOLS FOR MACHINING APPLICATION - III, 138-1, 479–520. https://doi.org/10.4028/www.scientific.net/kem.138-140.479

Cai, G. X., & Yuan, F. G. (1998). Stresses around the crack tip due to electric current and self-induced magnetic field. ADVANCES IN ENGINEERING SOFTWARE, Vol. 29, pp. 297–306. https://doi.org/10.1016/S0965-9978(97)00078-1

Edwards, JR, & Liou, M. S. (1998, September). Low-diffusion flux-splitting methods for flows at all speeds. AIAA JOURNAL, Vol. 36, pp. 1610–1617. https://doi.org/10.2514/2.587

Berger, E. H., Franks, JR, Behar, A., Casali, J. G., Dixon-Ernst, C., Kieper, R. W., … Royster, L. H. (1998). Development of a new standard laboratory protocol for estimating the field attenuation of hearing protection devices. Part III. The validity of using subject-fit data. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 103(2), 665–672. https://doi.org/10.1121/1.423236

Kuznetsov, A. V. (1998). Analytical investigation of heat transfer in Couette flow through a porous medium utilizing the Brinkman-Forchheimer-extended Darcy model. ACTA MECHANICA, 129(1-2), 13–24. https://doi.org/10.1007/BF01379647

Kuznetsov, A. V. (1998). Analytical investigation of Couette flow in a composite channel partially filled with a porous medium and partially with a clear fluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 41(16), 2556–2560. https://doi.org/10.1016/S0017-9310(97)00296-2

Pellett, G. L., Isaac, K. M., Humphreys, W. M., Gartrell, L. R., Roberts, W. L., Dancey, C. L., & Northam, G. B. (1998). Velocity and thermal structure, and strain-induced extinction of 14 to 100% hydrogen-air counterflow diffusion flames. COMBUSTION AND FLAME, 112(4), 575–592. https://doi.org/10.1016/S0010-2180(97)00169-7

Ramasubramanian, M. K., & Crews, W. R. (1998). Shear strength of an adhesively bonded paper-metal interface. Journal of Pulp and Paper Science, 24(1), 31–36.

Edwards, JR, & Roy, C. J. (1998, February). Preconditioned multigrid methods for two-dimensional combustion calculations at all speeds. AIAA JOURNAL, Vol. 36, pp. 185–192. https://doi.org/10.2514/2.7500

Wang, W. X., Takao, Y., Yuan, F. G., Potter, B. D., & Pater, R. H. (1998). The interlaminar Mode I fracture of IM7/LaRC-RP46 composites at high temperatures. JOURNAL OF COMPOSITE MATERIALS, 32(16), 1508–1526. https://doi.org/10.1177/002199839803201603

Shih, A. J. (1998). Rotary truing of vitreous bond diamond grinding wheels using metal bond diamond disks. MACHINING SCIENCE AND TECHNOLOGY, 2(1), 13–28. https://doi.org/10.1080/10940349808945656

Marov, M. Y., & Walberg, G. D. (1998). Mars' atmosphere: A study with microstation network. Life Sciences: Exobiology: Proceedings of the F3.3 and F3.5 Symposia of COSPAR Scientific Commission F Which Was Held during the Thirty-Second COSPAR Scientific Assembly, Nagoya, Japan, 12-19 July, 1998. (Advances in Space Research; v. 23, No. 2), 459–462.

Franzoni, L. P., & Elliott, C. M. (1998). An innovative design of a probe-tube attachment for a microphone. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 104(5), 2903–2910. https://doi.org/10.1121/1.423873

Kameda, T., & Zikry, M. A. (1998). Three dimensional dislocation-based crystalline constitutive formulation for ordered intermetallics. SCRIPTA MATERIALIA, 38(4), 631–636. https://doi.org/10.1016/s1359-6462(97)00512-5

Ouedraogo, A., Mulligan, J. C., & Cleland, J. G. (1998). Quasi-steady shrinking core analysis of wood combustion. COMBUSTION AND FLAME, 114(1-2), 1–12. https://doi.org/10.1016/S0010-2180(97)00291-5

Rao, M. S., & Hassan, H. A. (1998). Modeling turbulence in the presence of adverse pressure gradients. JOURNAL OF AIRCRAFT, Vol. 35, pp. 500–502. https://doi.org/10.2514/2.2328

Benedict, L. H., & Gould, R. D. (1998). Enhanced power spectrum estimates using Kalman reconstruction. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 120(2), 253–256. https://doi.org/10.1115/1.2820641

Silverberg, L. (1998). Comment on "conjecture about orthogonal functions" - Reply. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Vol. 21, pp. 189–190. https://doi.org/10.2514/2.4223

Kim, C., & Ro, P. I. (1998). A sliding mode controller for vehicle active suspension systems with non-linearities. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 212(D2), 79–92. https://doi.org/10.1243/0954407981525812