Mechanical and Aerospace Engineering - 1999

Ekkad, S. V., Huang, Y., & Han, J.-C. (1999). Impingement heat transfer on a target plate with film cooling holes. Journal of Thermophysics and Heat Transfer, 13(4), 522–528. https://doi.org/10.2514/2.6471

Ekkad, S. V., & Han, J.-C. (1999). Heat transfer distributions on a cylinder with simulated thermal barrier coating spallation. Journal of Thermophysics and Heat Transfer, 13(1), 76–81. https://doi.org/10.2514/2.6403

Du, H., Ekkad, S. V., & Han, J.-C. (1999). Effect of unsteady wake with trailing edge coolant ejection on film cooling performance for a gas turbine blade. Journal of Turbomachinery, 121(3), 448–455. https://doi.org/10.1115/1.2841337

Ekkad, S. V., Pamula, G., & Acharya, S. (1999). Influence of cross-flow induced swirl and impingement on heat transfer in an internal coolant passage of a turbine airfoil. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 364-1, 227–233. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0033313153&partnerID=MN8TOARS

Ngaile, G., & Saiki, H. (1999). Cold forging tribo-test based on variation of deformation patterns at the tool-work piece interface. Journal of Tribologist and Lubrication Engineers (STLE), 23–31.

Ross, B., Lange, C., & Eischen, J. W. (1999). Multidiscipline Analysis of a Fatal LPG Tank Rupture. Proceedings of the 53rd Meeting of the Society for Machinery Failure Prevention Technology. Presented at the Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA.

Bauer-Kurz, I., & Eischen, J. W. (1999, July 4). The Mechanics of Removing Staple Crimp. Presented at the Gordon Research Conference, New London, NH.

Sugimura, Y., Rabiei, A., Evans, A. G., Harte, A. M., & Fleck, N. A. (1999). Compression fatigue of a cellular Al alloy. Materials Science and Engineering: A, 269(1-2), 38–48. https://doi.org/10.1016/s0921-5093(99)00147-1

Rabiei, A., Mumm, D. R., Hutchinson, J. W., Schweinfest, R., Rühle, M., & Evans, A. G. (1999). Microstructure, deformation and cracking characteristics of thermal spray ferrous coatings. Materials Science and Engineering: A, 269(1-2), 152–165. https://doi.org/10.1016/s0921-5093(99)00132-x

Reyhanoglu, M., Cho, S., & McClamroch, N. H. (1999). Feedback control of a planar manipulator with an unactuated elastically mounted end effector. Proceedings 1999 IEEE International Conference on Robotics and Automation, 4, 2805–2810. https://doi.org/10.1109/ROBOT.1999.774022

Reyhanoglu, M., Cho, S., & McClamroch, N. H. (1999). Feedback stabilization for a special class of underactuated mechanical systems. Proceedings of the 38th IEEE Conference on Decision and Control, 2, 1658–1663. https://doi.org/10.1109/CDC.1999.830262

Reyhanoglu, M., Cho, S., & McClamroch, N. H. (1999). Feedback control for planar maneuvers of an aerospace vehicle with an unactuated internal degree of freedom. Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251). Presented at the 1999 American Control Conference, San Diego, CA. https://doi.org/10.1109/acc.1999.782402

Lohner, R., Yang, C., Cebral, J., Baum, J. D., Mestreau, E., Luo, H., … Charman., C. (1999). Fluid-structure-thermal interaction using a loose coupling algorithm and adaptive unstructured grids. In T. Kvamsdal (Ed.), Computational methods for fluid-structure interaction : proceedings from the International Symposium on Computational Methods for Fluid-Structure Interaction, 15-17 February 1999 (pp. 109–120). https://doi.org/10.2514/6.1998-2419

Reyhanoglu, M., van der Schaft, A., Mcclamroch, N. H., & Kolmanovsky, I. (1999). Dynamics and control of a class of underactuated mechanical systems. IEEE Transactions on Automatic Control, 44(9), 1663–1671. https://doi.org/10.1109/9.788533

Chen, J. H., Echekki, T., & Kollmann, W. (1999). The mechanism of two-dimensional pocket formation in lean premixed methane-air flames with implications to turbulent combustion. Combustion and Flame, 116(1-2), 15–48. https://doi.org/10.1016/S0010-2180(98)00026-1

Echekki, T., & Chen, J. H. (1999). Analysis of the contribution of curvature to premixed flame propagation. Combustion and Flame, 118(1-2), 308–311. https://doi.org/10.1016/S0010-2180(99)00006-1

Lohner, R., Yang, C., Baum, J. D., Luo, H., Pelessone, D., & Charman, C. M. (1999, September 15). The numerical simulation of strongly unsteady flow with hundreds of moving bodies. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, Vol. 31, pp. 113-+. https://doi.org/10.1002/(sici)1097-0363(19990915)31:1<113::aid-fld958>3.0.co;2-q

Fridman, A., Nester, S., Kennedy, L. A., Saveliev, A., & Mutaf-Yardimci, O. (1999). [Review of Gliding arc gas discharge]. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 25(2), 211–231. https://doi.org/10.1016/s0360-1285(98)00021-5

Li, Y., Greenfeder, S., Martin, L. D., Minnicozzi, M., Voynow, J. A., & Adler, K. B. (1999). Cloning and expression of guinea pig MUC2 and MUC5AC genes. American Journal of Respiratory and Critical Care Medicine, Vol. 159, p. A852.

Shih, A. J., & Lee, N. L. (1999). Precision cylindrical face grinding. PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 23(3), 177–184. https://doi.org/10.1016/S0141-6359(99)00008-2

McRae, D. S., & Laflin, K. R. (1999). Dynamic grid adaption and grid quality. In B. S. J. F. Thompson & N. P. Weatherill (Eds.), Handbook of grid generation (pp. 34/1–3433). Boca Raton, FL: CRC Press.

Brown, C. D., Leach, J. W., & Terry, S. D. (1999). Evaporative air conditioning in a manufacturing facility. ENERGY ENGINEERING, 96(4), 40–58. https://doi.org/10.1080/01998595.1999.10530467

Simon, T. M., Ito, K., Banks, H. T., Reitich, F., & Jolly, M. R. (1999). Estimation of the effective permeability in magnetorheological fluids. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 10(11), 872–879. https://doi.org/10.1106/6KW6-7V12-NRQ3-BW6V

Decroix, M. E., & Roberts, W. L. (1999). Study of transient effects on the extinction limits of an unsteady counterflow diffusion flame. COMBUSTION SCIENCE AND TECHNOLOGY, 146(1-6), 57–84. https://doi.org/10.1080/00102209908924208

Miller, M. H., & Dow, T. A. (1999). Influence of the grinding wheel in the ductile grinding of brittle materials: Development and verification of kinematic based model. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121(4), 638–646. https://doi.org/10.1115/1.2833087

Silverberg, L., & Washington, G. (1999). Weighted-residual discretization for uniform damping and uniform stiffening of structural systems. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 22(4), 614–618. https://doi.org/10.2514/2.7638

Ly, H. V., Reitich, E., Jolly, M. R., Banks, H. T., & Ito, K. (1999). Simulations of particle dynamics in magnetorheological fluids. JOURNAL OF COMPUTATIONAL PHYSICS, 155(1), 160–177. https://doi.org/10.1006/jcph.1999.6335

Zheleva, T. S., Ashmawi, W. M., & Jones, K. A. (1999). Pendeo-epitaxy versus lateral epitaxial overgrowth of GaN: A comparative study via finite element analysis. Physica Status Solidi. A, Applications and Materials Science, 176(1), 545–551.

Stanley, R. J., & Silverberg, L. M. (1999). Paraboloidally shaped antenna possessing pointing and beam-width control. JOURNAL OF SPACECRAFT AND ROCKETS, 36(5), 736–744. https://doi.org/10.2514/2.3487

Kim, S. H., Kim, D. J., Im, J., Kim, C. E., & Kingon, A. I. (1999). Ferroelectric properties of new chemical solution derived SBT thin films for non-volatile memory devices. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 16(1-2), 57–63. https://doi.org/10.1023/A:1008748718231

Cai, G. X., & Yuan, F. G. (1999). Electric current-induced stresses at the crack tip in conductors. INTERNATIONAL JOURNAL OF FRACTURE, 96(3), 279–301. https://doi.org/10.1023/A:1018670829822

Kuznetsov, A. V. (1999). Analytical investigation of forced convection from a flat plate enhanced by a porous substrate. ACTA MECHANICA, 137(3-4), 211–223. https://doi.org/10.1007/bf01179210

Brown, C. D., Watson, K. A., & Lyons, K. M. (1999). Studies on lifted jet flames in coflow: The stabilization mechanism in the near- and far-fields. FLOW TURBULENCE AND COMBUSTION, 62(3), 249–273. https://doi.org/10.1023/A:1009925500084

Buchanan, JR, Kleinstreuer, C., Truskey, G. A., & Lei, M. (1999). Relation between non-uniform hemodynamics and sites of altered permeability and lesion growth at the rabbit aorto-celiac junction. ATHEROSCLEROSIS, 143(1), 27–40. https://doi.org/10.1016/S0021-9150(98)00264-0

Kuznetsov, A. V. (1999). Parametric study of macrosegregation in the horizontal strip casting process for different cooling rates and different casting speeds. HEAT AND MASS TRANSFER, 35(3), 197–203. https://doi.org/10.1007/s002310050314

Sheikh-Ahmad, J. Y., & Bailey, J. A. (1999). [Review of High-temperature wear of cemented tungsten carbide tools while machining particleboard and fiberboard]. JOURNAL OF WOOD SCIENCE, 45(6), 445–455. https://doi.org/10.1007/BF00538952

Kuznetsov, A. V. (1999). Fluid mechanics and heat transfer in the interface region between a porous medium and a fluid layer: A boundary layer solution. Journal of Porous Media, 2(3), 309–321. https://doi.org/10.1615/jpormedia.v2.i3.70

Sheikh-Ahmad, J. Y., & Bailey, J. A. (1999, April). The wear characteristics of some cemented tungsten carbides in machining particleboard. WEAR, Vol. 225, pp. 256–266. https://doi.org/10.1016/s0043-1648(98)00361-5

Wang, X. C., Jobin, C., Allen, J. B., Roberts, W. L., & Jaffe, G. J. (1999). Suppression of NF-kappa B-Dependent proinflammatory gene expression in human RPE cells by a proteasome inhibitor. Investigative Ophthalmology and Visual Science, 40(2), 477–486.

Watson, K. A., Lyons, K. M., Donbar, J. M., & Carter, C. D. (1999). Scalar and velocity field measurements in a lifted CH4-air diffusion flame. COMBUSTION AND FLAME, 117(1-2), 257–271. https://doi.org/10.1016/S0010-2180(98)00086-8

Baucom, J. N., & Zikry, M. A. (1999). Perturbation analysis of high strain-rate shear localization in BCC crystalline materials. ACTA MECHANICA, 137(1-2), 109–129. https://doi.org/10.1007/BF01313148

Tricard, M., Gust, D. J., & Shih, A. J. (1999). Systems approach for the ceramic thru-feed centerless grinding. MACHINING SCIENCE AND TECHNOLOGY, 3(2), 201–219. https://doi.org/10.1080/10940349908945690

Flanagan, M. P., Zikry, M. A., Wall, J. W., & El-Shiekh, A. (1999). An experimental investigation of high velocity impact and penetration failure modes in textile composites. JOURNAL OF COMPOSITE MATERIALS, 33(12), 1080–1103. https://doi.org/10.1177/002199839903301202

Hong, D. H., & Kim, C. (1999). A note on similarity measures between vague sets and between elements. INFORMATION SCIENCES, 115(1-4), 83–96. https://doi.org/10.1016/S0020-0255(98)10083-X

Brown, M. S., & Roberts, W. L. (1999). Single-point thermometry in high-pressure, sooting, premixed combustion environments. JOURNAL OF PROPULSION AND POWER, Vol. 15, pp. 119–127. https://doi.org/10.2514/2.5400

Nield, D. A., & Kuznetsov, A. V. (1999). Local thermal nonequilibrium effects in forced convection in a porous medium channel: a conjugate problem. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 42(17), 3245–3252. https://doi.org/10.1016/S0017-9310(98)00386-X

Benedict, L. H., & Gould, R. D. (1999). Understanding biases in the near-field region of LDA two-point correlation measurements. EXPERIMENTS IN FLUIDS, 26(5), 381–388. https://doi.org/10.1007/s003480050301

Zheleva, T. S., Ashmawi, W. M., Nam, O. H., & Davis, R. F. (1999). Thermal mismatch stress relaxation via lateral epitaxy in selectively grown GaN structures. APPLIED PHYSICS LETTERS, 74(17), 2492–2494. https://doi.org/10.1063/1.123017

Zheleva, T. S., Smith, S. A., Thomson, D. B., Gehrke, T., Linthicum, K. J., Rajagopal, P., … Davis, R. F. (1999). Pendeo-epitaxy: A new approach for lateral growth of gallium nitride structures. MRS Internet Journal of Nitride Semiconductor Research, 4S1(G3.38).

Watson, K. A., Lyons, K. M., Donbar, J. M., & Carter, C. D. (1999). Observations on the leading edge in lifted flame stabilization. COMBUSTION AND FLAME, 119(1-2), 199–202. https://doi.org/10.1016/S0010-2180(99)00056-5

Nance, R. P., Hollis, B. R., Horvath, T. J., Alter, S. J., & Hassan, H. A. (1999). Computational study of hypersonic transitional wake flow. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 13(2), 236–242. https://doi.org/10.2514/2.6441

Hong, D. H., & Choi, C. H. (1999). A note on infinite fuzzy logic L-1 controllers. FUZZY SETS AND SYSTEMS, 101(3), 513–514. https://doi.org/10.1016/S0165-0114(98)00183-3

Hutapea, P., & Yuan, F. G. (1999). The effect of thermal aging on the Mode-I interlaminar fracture behavior of a high-temperature IM7/LaRC-RP46 composite. COMPOSITES SCIENCE AND TECHNOLOGY, 59(8), 1271–1286. https://doi.org/10.1016/S0266-3538(98)00164-X

Eichenberger, D. A., & Roberts, W. L. (1999). Effect of unsteady stretch on spark-ignited flame kernel survival. COMBUSTION AND FLAME, 118(3), 469–478. https://doi.org/10.1016/S0010-2180(98)00169-2

Hollis, B. R., & Perkins, J. N. (1999). Transition effects on heating in the wake of a blunt body. JOURNAL OF SPACECRAFT AND ROCKETS, 36(5), 668–674. https://doi.org/10.2514/2.3499

Chokani, N. (1999). Nonlinear spectral dynamics of hypersonic laminar boundary layer flow. Physics of Fluids (Woodbury, N.Y.), 11(12), 3846–3851.

Kim, C., Ro, P. I., & Kim, H. (1999). Effect of the suspension structure on equivalent suspension parameters. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 213(D5), 457–470. https://doi.org/10.1243/0954407991527026