Mechanical & Aerospace Engineering - 2004

Becker, S. M., Kuznetsov, A. V., & Avramenko, A. A. (2004). Numerical modeling of a falling bioconvection plume in a porous medium. Fluid Dynamics Research, 35(5), 323–339. https://doi.org/10.1016/j.fluiddyn.2004.07.003

Bond, R. B., & Edwards, J. R. (2004). Computational analysis of an independent ramjet stream in a combined cycle engine. AIAA Journal, 42(11), 2276–2283. https://doi.org/10.2514/1.4465

Cold and hot forging: Fundamentals and applications. (2004). Materials Park, Ohio: ASM International.

Dow, T. A., Miller, E. L., & Garrard, K. (2004). Tool force and deflection compensation for small milling tools. Precision Engineering, 28(1), 31–45. https://doi.org/10.1016/S0141-6359(03)00072-2

Gutscher, G., Wu, H.-C., Ngaile, G., & Altan, T. (2004). Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test. Journal of Materials Processing Technology, 146, 1–7. https://doi.org/10.1016/S0924-0136(03)00838-0

Koo, J. M., & Kleinstreuer, C. (2004). A  new thermal conductivity model for nanofluids. Journal of Nanoparticle Research, 6(6), 577–588. https://doi.org/10.1007/s11051-004-3170-5

Kuznetsov, A. V. (2004). Numerical modeling of turbulent flow in a composite porous/fluid duct utilizing a two-layer k-epsilon model to account for interface roughness. International Journal of Thermal Sciences, 43(11), 1047–1056. https://doi.org/10.1016/j.ijthermalsci.2004.02.011

Longest, P. W., & Kleinstreuer, C. (2004). Interacting effects of uniform flow, plane shear, and near-wall proximity on the heat and mass transfer of respiratory aerosols. International Journal of Heat and Mass Transfer, 47(22), 4745–4759. https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.029

Marley, S. K., Welle, E. J., Lyons, K. M., & Roberts, W. L. (2004). Effects of leading edge entrainment on the double flame structure in lifted ethanol spray flames. Experimental Thermal and Fluid Science, 29(1), 23–31. https://doi.org/10.1016/j.ecpthermflusci.2004.01.009

Ngaile, G., Jaeger, S., & Altan, T. (2004). Lubrication in tube hydroforming (THF). Part I: Lubrication mechanisms and development of model tests to evaluate lubricants and die coatings in the transition and expansion zones. Journal of Materials Processing Technology, 146, 108–115. https://doi.org/10.1016/S0924-0136(03)00850-1

Ngaile, G., Jaeger, S., & Altan, T. (2004). Lubrication in tube hydroforming (THF). Part II: Performance evaluation of lubricants using LDH test and pear-shaped tube expansion test. Journal of Materials Processing Technology, 146, 116–123. https://doi.org/10.1016/S0924-0136(03)00851-3

Palaniswamy, H., Ngaile, G., & Altan, T. (2004). Finite element simulation of magnesium alloy sheet forming at elevated temperatures. Journal of Materials Processing Technology, 146, 52–60. https://doi.org/10.1016/S0924-0136(03)00844-6

Palaniswamy, H., Ngaile, G., & Altan, T. (2004). Optimization of blank dimensions to reduce springback in the flexforming process. Journal of Materials Processing Technology, 146, 28–34. https://doi.org/10.1016/S0924-0136(03)00841-0

Saadat, S., Noori, M. N., Buckner, G. D., Furukawa, T. D., & Suzuki, Y. (2004). Structural health monitoring and damage detection using an intelligent parameter varying (IPV) technique. International Journal of Non-Linear Mechanics, 39(10), 1687–1697. https://doi.org/10.1016/j.ijnonlinmec.2004.03.001

Shirgaokar, M., Cho, H., Ngaile, G., Altan, T., Yu, J.-H., Balconi, J., … Worrell, W. J. (2004). Optimization of mechanical crimping to assemble tubular components. Journal of Materials Processing Technology, 146, 35–43. https://doi.org/10.1016/S0924-0136(03)00842-2

Shirgaokar, M., Ngaile, G., Altan, T., Yu, J.-H., Balconi, J., Rentfrow, R., & Worrell, W. J. (2004). Hydraulic crimping: Application to the assembly of tubular components. Journal of Materials Processing Technology, 146, 44–51. https://doi.org/10.1016/S0924-0136(03)00843-4

Song, G., Barker, R. L., Hamouda, H., Kuznetsov, A. V., Chitrpheromsri, P., & Grimes, R. (2004). Modeling the thermal protective performance of heat resistant garments in flash fire exposure. Textile Research Journal, 74(12), 1033–1040. https://doi.org/10.1177/004051750407401201

Strenkowski, J. S., Hsieh, C. C., & Shih, A. (2004). An  analytical finite element technique for predicting thrust force and torque in drilling. International Journal of Machine Tools & Manufacture, 44(13-Dec), 1413–1421. https://doi.org/10.1016/j.ijmachtools.2004.01.005

Tollner, E. W., & Huang, H.-Y. S. (2004). A shaft design aid for integrating basic elements of introductory machine design. American Society for Engineering Education Annual Conference & Exposition, Salt Lake City, Utah, 66.

Wang, X.-H., & Ma, N. (2004). Strong magnetic field asymptotic model for binary alloyed semiconductor crystal growth. Journal of Thermophysics and Heat Transfer, 18(4), 476–480. https://doi.org/10.2514/1.11905