Mechanical and Aerospace Engineering - 2005 Mahmud Hasan, A. B., Ekkad, S. V., & Mensah, P. (2005). Simulations of dimensional effects in solid oxide fuel cells. Proceedings of the ASME Summer Heat Transfer Conference, 4, 11–16. https://doi.org/10.1115/HT2005-72394 Lu, Y., Fauchcaux, D., & Ekkad, S. V. (2005). Film cooling measurements for novel hole configurations. Proceedings of the ASME Summer Heat Transfer Conference, 3, 59–66. https://doi.org/10.1115/HT2005-72396 Mahmud Hasan, A. B., Guo, S. M., & Ekkad, S. V. (2005). The effects of feeding configurations to water flooding and general performance of a proton exchange membrane fuel cell. American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 45, 429–435. https://doi.org/10.1115/IMECE2005-81268 Hebert, R., Ekkad, S. V., Gao, L., & Bunker, R. S. (2005). Impingement heat transfer, part II: Effect of streamwise pressure gradient. Journal of Thermophysics and Heat Transfer, 19(1), 66–71. https://doi.org/10.2514/1.8588 Gao, L., Ekkad, S. V., & Bunker, R. S. (2005). Impingement heat transfer, part I: Linearly stretched arrays of holes. Journal of Thermophysics and Heat Transfer, 19(1), 57–65. https://doi.org/10.2514/1.8551 Lu, Y., Nasir, H., & Ekkad, S. V. (2005). Film cooling from a row of holes embedded in transverse slots. Proceedings of the ASME Turbo Expo, 3 PART A, 585–592. https://doi.org/10.1115/GT2005-68598 Ibrahim, M. B., Kochuparambil, B. J., Ekkad, S. V., & Simon, T. W. (2005). CFD for jet impingement heat transfer with single jets and arrays. Proceedings of the ASME Turbo Expo, 3 PART A, 359–373. https://doi.org/10.1115/GT2005-68341 Nasir, H., Ekkad, S. V., & Bunker, R. S. (2005). Effect of tip and pressure side coolant injection on heat transfer distributions for a plane and recessed tip. Proceedings of the ASME Turbo Expo, 3 PART A, 573–584. https://doi.org/10.1115/GT2005-68595 Prabhugoud, M., Pearson, J., Peters, K., & Zikry, M. (2005). Radiation and cladding modes as independent measurements of Bragg grating sensor integrity. Proceedings of SPIE - The International Society for Optical Engineering, 5758, 440–450. https://doi.org/10.1117/12.597782 Pearson, J., Prabhugoud, M., Zikry, M., Peters, K., Sitar, M., & Davis, L. (2005). Failure and damage identification in woven composites with fiber Bragg grating sensors. Proceedings of SPIE - The International Society for Optical Engineering, 5765(PART 1), 540–551. https://doi.org/10.1117/12.599771 Badr, H., M.Arif, A. F., Sheikh, A. K., Shuaib, A. N., Khan, Z., Khan, A. S., … Zikry, M. A. (2005). Theme issue on modeling of metal forming processes. Arabian Journal for Science and Engineering, 30(1 C). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-32544458475&partnerID=MN8TOARS Ma, J. B., Ashmawi, W., Zikry, M. A., Schall, D., & Brenner, D. W. (2005). Modeling of nanoindentation and microstructural ductile behavior in metallic material systems. Materials Research Society Symposium Proceedings, 841, 317–322. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-23844433619&partnerID=MN8TOARS Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2005). Damage progression identification in woven composites with fiber bragg grating sensors. American Society of Mechanical Engineers, Materials Division (Publication) MD, 100 MD, 49–57. https://doi.org/10.1115/IMECE2005-80487 Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2005). A Study on Hydroentangling Waterjets. International Nonwoven Technical Conference (INTC 2005). Presented at the International Nonwoven Technical Conference (INTC 2005), St. Louis, Missouri. Tafreshi, H. V., Maze, B., & Pourdeyhimi, B. (2005). Water Flow Simulation in Nonwovens Made of Hydrophilic and Non-hydrophilic Fibers. Belt-wide Cotton Conference. Presented at the Belt-wide Cotton Conference, New Orleans, Louisiana. Benedek, G., Vahedi Tafreshi, H., Podesta’, A., & Milani, P. (2005). FRACTAL GROWTH OF CARBON SCHWARZITES. Presented at the Proceedings of the 31st Workshop of the International School of Solid State Physics. https://doi.org/10.1142/9789812701558_0017 Ngaile, G., & Shirgaokar, M. (2005). Near-Net shape forging and new development. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040319 Ngaile, G., Shirgaokar, M., & Shen, G. (2005). Process Modeling in Impression-Die Forging Using Finite-Element Analysis. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040193 Ngaile, G., & Gariety, M. (2005). Friction and Lubrication. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040067 Ngaile, G. (2005). Plastic Deformation: Complex state of stress and flow rules. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040051 Ngaile, G., & Shirgaokar, M. (2005). Plastic Deformation: Strain and Strain Rate. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040017 Altan, T., Ngaile, G., & Shen, G. (2005). Cold and Hot Metal Forging: Fundamentals and Applications. Materials Park, OH: ASM International. Woody, S. C., Smith, S. T., Jiang, X., & Rehrig, P. W. (2005). Performance of single-crystal Pb(Mg1∕3Nb2∕3)-32%PbTiO3 stacked actuators with application to adaptive structures. Review of Scientific Instruments, 76(7), 075112. https://doi.org/10.1063/1.1984974 Zhan, C., Wu, J., Yin, S., & Jiang, X. (2005). Strong, high-frequency, ac electric-field-induced rhombohedra-tetragonal phase transition in Pb(Mg1∕3Nb2∕3)O3–PbTiO3 single crystal. Journal of Applied Physics, 97(7), 074107. https://doi.org/10.1063/1.1881794 Dong, S., Yan, L., Wang, N., Viehland, D., Jiang, X., Rehrig, P., & Hackenberger, W. (2005). A small, linear, piezoelectric ultrasonic cryomotor. Applied Physics Letters, 86(5), 053501. https://doi.org/10.1063/1.1855424 Coffey, S. L., Mazzoleni, A. P., Luu, K. K., & Glover, R. A. (2005). Spaceflight mechanics 2004 : proceedings of the 14th AAS/AIAA Space flight mechanics meeting held 8-12 February 2004, Maui, Hawaii. Presented at the 14th AAS/AIAA Space Flight Mechanics Meeting, Maui, Hawai'i. Mahindrakar, A. D., Banavar, R. N., & Reyhanoglu, M. (2005). Controllability and Point-to-Point Control of 3-DOF Planar Horizontal Underactuated Manipulators. International Journal of Control, 78(1), 1–13. https://doi.org/10.1080/00207170412331317422 Löhner, R., Luo, H., & Baum, J. D. (2005). Selective edge removal for unstructured grids with Cartesian cores. Journal of Computational Physics, 206(1), 208–226. https://doi.org/10.1016/j.jcp.2004.11.034 Fang, T., & Lee, C.-fon F. (2005). Exact solutions of incompressible Couette flow with porous walls for slightly rarefied gases. Heat and Mass Transfer, 42(3), 255–262. https://doi.org/10.1007/s00231-005-0009-2 Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2005). Low temperature combustion within a small bore high speed direct injection (HSDI) diesel engine. SAE Technical Papers. https://doi.org/10.4271/2005-01-0919 Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2005). Liquid and vapor fuel distributions within a High Speed Direct Injection (HSDI) diesel engine operating in HCCI and conventional combustion modes. SAE Technical Papers. https://doi.org/10.4271/2005-01-3838 Zhu, Y., & Espinosa, H. D. (2005). An electromechanical material testing system for in situ electron microscopy and applications. Proceedings of the National Academy of Sciences, 102(41), 14503–14508. https://doi.org/10.1073/pnas.0506544102 Bažant, Z. P., Guo, Z., Espinosa, H. D., Zhu, Y., & Peng, B. (2005). Epitaxially influenced boundary layer model for size effect in thin metallic films. Journal of Applied Physics, 97(7), 073506. https://doi.org/10.1063/1.1861150 Zhu, Y., Moldovan, N., & Espinosa, H. D. (2005). A microelectromechanical load sensor for in situ electron and x-ray microscopy tensile testing of nanostructures. Applied Physics Letters, 86(1), 013506. https://doi.org/10.1063/1.1844594 Holzbaur, K. R. S., Murray, W. M., & Delp, S. L. (2005). A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control. Annals of Biomedical Engineering, 33(6), 829–840. https://doi.org/10.1007/S10439-005-3320-7 Prabhugoud, M., & Peters, K. (2005). Birefringence and Transverse Strain Sensitivity in Bragg Grating Sensors. In Sensing Issues in Civil Structural Health Monitoring (pp. 433–442). https://doi.org/10.1007/1-4020-3661-2_43 Muller, M., Moilanen, P., Bossy, E., Nicholson, P., Kilappa, V., Timonen, J., … Laugier, P. (2005). Comparison of three ultrasonic axial transmission methods for bone assessment. Ultrasound in Medicine & Biology, 31(5), 633–642. https://doi.org/10.1016/j.ultrasmedbio.2005.02.001 Fang, T., & Lee, C.-fon F. (2005). A moving-wall boundary layer flow of a slightly rarefied gas free stream over a moving flat plate. Applied Mathematics Letters, 18(5), 487–495. https://doi.org/10.1016/j.aml.2004.08.006 Montoya, J. C., Chang, C.-H., Heilmann, R. K., & Schattenburg, M. L. (2005). Doppler writing and linewidth control for scanning beam interference lithography. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 23(6), 2640. https://doi.org/10.1116/1.2127938 Xu, C., & Shin, Y. C. (2005). Design of a multilevel fuzzy controller for nonlinear systems and stability analysis. IEEE Transactions on Fuzzy Systems, 13(6), 761–778. https://doi.org/10.1109/TFUZZ.2005.859308 Luo, H., Baum, J. D., & Lohner, R. (2005). High-Reynolds number viscous flow computations using an unstructured-grid method. JOURNAL OF AIRCRAFT, Vol. 42, pp. 483–492. https://doi.org/10.2514/1.7575 Luo, H., Baum, J. D., & Lohner, R. (2005, June). Extension of Harten-Lax-van Leer scheme for flows at all speeds. AIAA JOURNAL, Vol. 43, pp. 1160–1166. https://doi.org/10.2514/1.7567 Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2005, April). Initiation of pulsed corona discharge under supercritical conditions. IEEE TRANSACTIONS ON PLASMA SCIENCE, Vol. 33, pp. 850–853. https://doi.org/10.1109/tps.2005.845302 Contarin, F., Barcellos, W. M., Saveliev, A. V., & Kennedy, L. A. (2005). Energy extraction from a porous media reciprocal flow burner with embedded heat exchangers. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 127(2), 123–130. https://doi.org/10.1115/1.1844539 Silvestrini, M., Merchan-Merchan, W., Richter, H., Saveliev, A., & Kennedy, L. A. (2005). Fullerene formation in atmospheric pressure opposed flow oxy-flames. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 30, pp. 2545–2552. https://doi.org/10.1016/j.proci.2004.08.238 Basic experiments in PID control for engineers. (2005). Boston : Pearson/Custom Publishing. Sohn, A., Garrard, K. P., & Dow, T. A. (2005). Polar coordinate-based profilometer and methods. Washington, DC: U.S. Patent and Trademark Office. Yang, S., & Yuan, F. G. (2005). Transient wave propagation of isotropic plates using a higher-order plate theory. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 42(14), 4115–4153. https://doi.org/10.1016/j.ijsolstr.2004.12.014 Bakkal, M., Shih, A. J., McSpadden, S. B., & Scattergood, R. O. (2005). Thrust force, torque, and tool wear in drilling the bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 863–872. https://doi.org/10.1016/j.ijmachtools.2004.11.005 Kuznetsov, A. (2005). The onset of bioconvection in a suspension of negatively geotactic microorganisms with high-frequency vertical vibration. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(9), 1119–1127. https://doi.org/10.1016/j.icheatmasstransfer.2005.05.004 Xiao, J., Austin, E., & Roberts, W. L. (2005). Relative polycyclic aromatic hydrocarbon concentrations in unsteady counterflow diffusion flames. COMBUSTION SCIENCE AND TECHNOLOGY, 177(4), 691–713. https://doi.org/10.1080/00102200590917239 Chitrphiromsri, P., & Kuznetsov, A. V. (2005). Porous medium model for investigating transient heat and moisture transport in firefighter protective clothing under high-intensity thermal exposure. Journal of Porous Media, 8(5), 511–528. https://doi.org/10.1615/jpormedia.v8.i5.80 Marley, S. K., & Roberts, W. L. (2005). Measurements of laminar burning velocity and Markstein number using high-speed chemiluminescence imaging. COMBUSTION AND FLAME, 141(4), 473–477. https://doi.org/10.1016/j.combustflame.2005.02.011 Baucom, J. N., & Zikry, M. A. (2005). Low-velocity impact damage progression in woven E-glass composite systems. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 36(5), 658–664. https://doi.org/10.1016/j.compositesa.2004.07.008 Bakkal, M., Shih, A. J., McSpadden, S. B., Liu, C. T., & Scattergood, R. O. (2005). Light emission, chip morphology, and burr formation in drilling the bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 741–752. https://doi.org/10.1016/j.ijmachtools.2004.11.004 Cheng, L., & Kuznetsov, A. V. (2005). Investigation of laminar flow in a helical pipe filled with a fluid saturated porous medium. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 24(3), 338–352. https://doi.org/10.1016/j.euromechflu.2004.08.002 Cheng, L. P., & Kuznetsov, A. V. (2005). Heat transfer in a laminar flow in a helical pipe filled with a fluid saturated porous medium. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 44(8), 787–798. https://doi.org/10.1016/j.ijthermalsci.2004.12.009 Kim, G., Kim, Y., & Ihm, J. (2005). Encapsulation and polymerization of acetylene molecules inside a carbon nanotube. Chemical Physics Letters, 416(06-Apr), 279–282. Kuznetsov, A. V., & Avramenko, A. A. (2005). Effect of fouling on stability of bioconvection of gyrotactic microorganisms in a porous medium. JOURNAL OF POROUS MEDIA, 8(1), 45–53. https://doi.org/10.1615/JPorMedia.v8.i1.40 Silverberg, L., & Levedahl, B. A. (2005). Autonomous coordination of aircraft formations using direct and nearest-neighbor approaches. JOURNAL OF AIRCRAFT, 42(2), 469–477. https://doi.org/10.2514/1.6868 Terry, S. D., & Lyons, K. M. (2005). Low Reynolds number turbulent lifted flames in high co-flow. COMBUSTION SCIENCE AND TECHNOLOGY, 177(11), 2091–2112. https://doi.org/10.1080/00102200500240489 Jepson, J. K., & Gopalarathnam, A. (2005). Inverse design of adaptive airfoils with aircraft performance considerations. Journal of Aircraft, 42(6), 1622–1630. Ranganath, B., & Echekki, T. (2005). Effects of preferential and differential diffusion on the mutual annihilation of two premixed hydrogen-air flames. COMBUSTION THEORY AND MODELLING, 9(4), 659–672. https://doi.org/10.1080/13647830500294006 Longest, P. W., & Kleinstreuer, C. (2005). Computational models for simulating multicomponent aerosol evaporation in the upper respiratory airways. AEROSOL SCIENCE AND TECHNOLOGY, 39(2), 124–138. https://doi.org/10.1080/027868290908786 Koo, J., & Kleinstreuer, C. (2005). Analysis of surface roughness effects on heat transfer in micro-conduits. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(13), 2625–2634. https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.024 Li, Y. Y., Roberts, W. L., Brown, M. S., & Gord, JR. (2005). Acoustic damping rate measurements in binary mixtures of atomic species via transient-grating spectroscopy. EXPERIMENTS IN FLUIDS, 39(4), 687–693. https://doi.org/10.1007/s00348-005-1012-6 Silverberg, L., & Duval, L. (2005). Transpermanent magnetics using alternating uniform linear stacks. JOURNAL OF MECHANICAL DESIGN, 127(4), 679–687. https://doi.org/10.1115/1.1897743 Zeng, T. F., & Sun, T. (2005). Size effect of nanoparticles in chemical mechanical polishing - A transient model. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 18(4), 655–663. https://doi.org/10.1109/TSM.2005.858508 Baldwin, E., Thomas, B., Lee, J. W., & Rabiei, A. (2005). Processing TiPdNi base thin-film shape memory alloys using ion beam assisted deposition. SURFACE & COATINGS TECHNOLOGY, 200(7), 2571–2579. https://doi.org/10.1016/j.surfcoat.2004.08.172 Longest, P. W., Kleinstreuer, C., & Deanda, A. (2005, December). Numerical simulation of wall shear stress and particle-based hemodynamic parameters in pre-cuffed and streamlined end-to-side anastomoses. ANNALS OF BIOMEDICAL ENGINEERING, Vol. 33, pp. 1752–1766. https://doi.org/10.1007/s10439-005-7784-2 King, R. M., & Gopalarathnam, A. (2005). Ideal aerodynamics of ground effect and formation flight. JOURNAL OF AIRCRAFT, Vol. 42, pp. 1188–1199. https://doi.org/10.2514/1.10942 Yang, M., & Ma, N. (2005). Free convection in a liquid-encapsulated molten semiconductor in a vertical magnetic field. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(19-20), 4010–4018. https://doi.org/10.1016/j.ijheatmasstransfer.2005.04.019 Lin, X., & Yuan, F. G. (2005). Experimental study applying a migration technique in structural health monitoring. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 4(4), 341–353. https://doi.org/10.1177/1475921705057973 Li, Z., Kleinstreuer, C., & Farber, M. (2005). Computational analysis of biomechanical contributors to endovascular graft failure. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, 4(4), 221–234. https://doi.org/10.1007/s10237-005-0003-0 Kuniholm, J. F., Buckner, G. D., Nifong, W., & Orrico, M. (2005). Automated knot tying for fixation in minimally invasive, robot-assisted cardiac surgery. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 127(6), 1001–1008. https://doi.org/10.1115/1.2055307 Jin, Y., & Yuan, F. G. (2005). Atomistic simulations of J-integral in 2D graphene nanosystems. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 5(12), 2099–2107. https://doi.org/10.1166/jnn.2005.414 Seelecke, S., Kim, S. J., Ball, B. L., & Smith, R. C. (2005). A rate-dependent two-dimensional free energy model for ferroelectric single crystals. CONTINUUM MECHANICS AND THERMODYNAMICS, 17(4), 337–350. https://doi.org/10.1007/s00161-005-0207-7 Dixit, R. K., & Buckner, G. D. (2005). Sliding mode observation and control for semiactive vehicle suspensions. VEHICLE SYSTEM DYNAMICS, 43(2), 83–105. https://doi.org/10.1080/00423110412331290455 Lu, B., Wu, F., & Kim, S. W. (2005). Linear parameter-varying antiwindup compensation for enhanced flight control performance. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Vol. 28, pp. 494–505. https://doi.org/10.2514/1.4952 Tolson, R. H., Dwyer, A. M., Hanna, J. L., Keating, G. M., George, B. E., Escalera, P. E., & Werner, M. R. (2005). Application of accelerometer data to Mars Odyssey aerobraking and atmospheric modeling. JOURNAL OF SPACECRAFT AND ROCKETS, 42(3), 435–443. https://doi.org/10.2514/1.15173 Stevens, J. M., & Buckner, G. D. (2005). Actuation and control strategies for miniature robotic surgical systems. Journal of Dynamic Systems, Measurement, and Control, 127(4), 537–549. https://doi.org/10.1115/1.2098892 Comins, D. L., & Sahn, J. J. (2005). A six-step asymmetric synthesis of (+)-hyperaspine. ORGANIC LETTERS, 7(23), 5227–5228. https://doi.org/10.1021/ol052068v Holmes, A. M., Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Vertical gradient freezing using submerged heater growth with rotation and with weak magnetic and electric fields. International Journal of Heat and Fluid Flow, 26(5), 792–800. Kuznetsov, A. V. (2005). The onset of bioconvection in a suspension of gyrotactic microorganisms in a fluid layer of finite depth heated from below. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(5), 574–582. https://doi.org/10.1016/j.icheatmasstransfer.2004.10.021 Geng, P., & Kuznetsov, A. V. (2005). Settling of bidispersed small solid particles in a dilute suspension containing gyrotactic micro-organisms. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 43(11-12), 992–1010. https://doi.org/10.1016/j.ijengsci.2005.03.002 Jin, Y., & Yuan, F. G. (2005). Nanoscopic modeling of fracture of 2D graphene systems. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 5(4), 601–608. https://doi.org/10.1166/jnn.2005.071 Gutierrez, H. M., & Ro, P. I. (2005). Magnetic servo levitation by sliding-mode control of nonaffine systems with algebraic input invertibility. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 52(5), 1449–1455. https://doi.org/10.1109/TIE.2005.855651 Avramenko, A. A., & Kuznetsov, A. V. (2005). Linear instability analysis of a suspension of oxytactic bacteria in superimposed fluid and porous layers. TRANSPORT IN POROUS MEDIA, 61(2), 157–175. https://doi.org/10.1007/s11242-004-7462-0 Avramenko, A. A., Kuznetsov, A. V., Basok, B. I., & Blinov, D. G. (2005). Investigation of stability of a laminar flow in a parallel-plate channel filled with a fluid saturated porous medium. PHYSICS OF FLUIDS, 17(9). https://doi.org/10.1063/1.2041607 Lemaster, R. L., Shih, A. J., & Yu, Z. (2005). Blasting and erosion wear of wood using sodium bicarbonate and plastic media. Forest Products Journal, 55(5), 59–64. Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). A numerical investigation of dopant segregation by modified vertical gradient freezing with moderate magnetic and weak electric fields. International Journal of Engineering Science, 43(12-Nov), 908–924. Yang, M., & Ma, N. (2005). A computational study of natural convection in a liquid-encapsulated molten semiconductor with a horizontal magnetic field. International Journal of Heat and Fluid Flow, 26(5), 810–816. Ramasubramanian, M. K., Venditti, R. A., Ammineni, C., & Mallapragada, V. (2005). Optical sensor for noncontact measurement of lignin content in high-speed moving paper surfaces. IEEE SENSORS JOURNAL, 5(5), 1132–1139. https://doi.org/10.1109/JSEN.2005.851007 Kuznetsov, A. V. (2005). Investigation of the onset of thermo-bioconvection in a suspension of oxytactic microorganisms in a shallow fluid layer heated from below. THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 19(4), 287–299. https://doi.org/10.1007/s00162-005-0167-3 Jepson, J. K., & Gopalarathnam, A. (2005). Incorporation of aircraft performance considerations in inverse airfoil design. JOURNAL OF AIRCRAFT, Vol. 42, pp. 199–207. https://doi.org/10.2514/1.5373 Wang, L., & Yuan, F. G. (2005). Damage identification in a composite plate using prestack reverse-time migration technique. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 4(3), 195–211. https://doi.org/10.1177/1475921705055233 Rabiei, A., & AT O'Neill. (2005). A study on processing of a composite metal foam via casting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 404(1-2), 159–164. https://doi.org/10.1016/j.msea.2005.05.089 Lyons, K. M., Watson, K. A., Carter, C. D., & Donbar, J. M. (2005). On flame holes and local extinction in lifted-jet diffusion flames. COMBUSTION AND FLAME, 142(3), 308–313. https://doi.org/10.1016/j.combustflame.2005.04.006 Li, Z., & Kleinstreuer, C. (2005). Fluid-structure interaction effects on sac-blood pressure and wall stress in a stented aneurysm. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 127(4), 662–671. https://doi.org/10.1115/1.1934040 Wan, Q., Roberts, W. L., & Kuznetsov, A. V. (2005). Computational analysis of the feasibility of a micro-pulsejet. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(1-2), 19–26. https://doi.org/10.1016/j.icheatmasstransfer.2004.05.020 Lawrence, B. M., Mirka, G. A., & Buckner, G. D. (2005). Adaptive system identification applied to the biomechanical response of the human trunk during sudden loading. JOURNAL OF BIOMECHANICS, 38(12), 2472–2479. https://doi.org/10.1016/j.jbiomech.2004.09.038 Kuznetsov, A. V., & Geng, P. (2005). The interaction of bioconvection caused by gyrotactic micro-organisms and settling of small solid particles. International Journal of Numerical Methods for Heat & Fluid Flow, 15(4), 328–347. https://doi.org/10.1108/0961550510590597 Coppa, B. J., Fulton, C. C., Kiesel, S. M., Davis, R. F., Pandarinath, C., Burnette, J. E., … Smith, D. J. (2005). Structural, microstructural, and electrical properties of gold films and Schottky contacts on remote plasma-cleaned, n-type ZnO{0001} surfaces. JOURNAL OF APPLIED PHYSICS, 97(10). https://doi.org/10.1063/1.1898436 Wu, F., & Prajna, S. (2005). SOS-based solution approach to polynomial LPV system analysis and synthesis problems. INTERNATIONAL JOURNAL OF CONTROL, 78(8), 600–611. https://doi.org/10.1080/00207170500114865 McCrain, L. L., & Roberts, W. L. (2005). Measurements of the soot volume field in laminar diffusion flames at elevated pressures. COMBUSTION AND FLAME, 140(1-2), 60–69. https://doi.org/10.1016/j.combustflame.2004.10.005 Wu, T., & Ro, P. I. (2005). Heat transfer performance of a cooling system using vibrating piezoelectric beams. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 15(1), 213–220. https://doi.org/10.1088/0960-1317/15/1/030 Wan, Q., Wu, T., Chastain, J., Roberts, W. L., Kuznetsov, A. V., & Ro, P. I. (2005). Forced convective cooling via acoustic streaming in a narrow channel established by a vibrating piezoelectric bimorph. FLOW TURBULENCE AND COMBUSTION, 74(2), 195–206. https://doi.org/10.1007/s10494-005-4132-4 Zhu, J., & Kuznetsov, A. V. (2005). Forced convection in a composite parallel plate channel: modeling the effect of interface roughness and turbulence utilizing a kappa-epsilon model. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(1-2), 10–18. https://doi.org/10.1016/j.icheatmasstransfer.2004.05.019 Wang, X. H., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Semiconductor crystal growth by modified vertical gradient freezing with electromagnetic stirring. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 19, pp. 95–100. https://doi.org/10.2514/1.10279 Fomin, S., Hashida, T., Chugunov, V., & Kuznestov, A. V. (2005). A borehole temperature during drilling in a fractured rock formation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(2), 385–394. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.042 Nield, D. A., & Kuznetsov, A. (2005). Thermally developing forced convection in a channel occupied by a porous medium saturated by a non-Newtonian fluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(6), 1214–1218. https://doi.org/10.1016/j.ijheatmasstransfer.2004.09.040 Chandrasekharan, S., Palaniswamy, H., Jain, N., Ngaile, G., & Altan, T. (2005). Evaluation of stamping lubricants at various temperature levels using the ironing test. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(4-5), 379–388. https://doi.org/10.1016/j.ijmachtools.2004.09.014 Li, Z., & Kleinstreuer, C. (2005). A new wall stress equation for aneurysm-rupture prediction. ANNALS OF BIOMEDICAL ENGINEERING, 33(2), 209–213. https://doi.org/10.1007/s10439-005-8979-2 LaPointe, S. J., Ma, N., & Mueller, D. W. (2005). Growth of binary alloyed semiconductor crystals by the vertical Bridgman-Stockbarger process with a strong magnetic field. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 127(3), 523–528. https://doi.org/10.1115/1.1899169 Nield, D. A., & Kuznetsov, A. V. (2005). A two-velocity two-temperature model for a bi-dispersed porous medium: Forced convection in a channel. TRANSPORT IN POROUS MEDIA, 59(3), 325–339. https://doi.org/10.1007/s11242-004-1685-y Chitrphiromsri, P., & Kuznetsov, A. (2005). Modeling heat and moisture transport in firefighter protective clothing during flash fire exposure. HEAT AND MASS TRANSFER, 41(3), 206–215. https://doi.org/10.1007/s00231-004-0504-x Chaos, M., Chen, R. H., Welle, E. J., & Roberts, W. L. (2005). Fuel Lewis number effects in unsteady Burke-Schumann hydrogen flames. COMBUSTION SCIENCE AND TECHNOLOGY, 177(1), 75-+. https://doi.org/10.1080/00102200590883660 Wang, X.-H., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Semiconductor crystal growth by modified vertical gradient freezing with electromagnetic stirring. AIAA 43rd Aerospace Sciences Meeting and Exhibit, Reno, NV, Jan. 2005, 2005-0916(2005 Jan.). Nield, D. A., & Kuznetsov, A. V. (2005). Thermal development of forced convection in a channel or duct partly occupied by a porous medium. JOURNAL OF POROUS MEDIA, 8(6), 627–638. https://doi.org/10.1615/JPorMedia.v8.i6.70 Yang, M., Ma, N. B., D. F., & Morton, J. L. (2005). Liquid-encapsulated Czochralski growth of doped gallium-antimonide semiconductor crystals using a strong steady magnetic field. Magnetohydrodynamics, 41(1), 73–86. Kuznetsov, A. V. (2005). Thermo-bioconvection in a suspension of oxytactic bacteria. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(8), 991–999. https://doi.org/10.1016/j.icheatmasstransfer.2004.11.005 Wu, F., & Prajna, S. (2005). SOS-based solution approach to polynomial LPV system analysis and synthesis problems. International Journal of Control, 78(8), 600–611. https://doi.org/10.1080/002071270500114865 Wang, X. H., & Ma, N. (2005). Numerical model for Bridgman-Stockbarger crystal growth with a magnetic field. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 19(3), 406–412. https://doi.org/10.2514/1.13307 Koo, J. M., & Kleinstreuer, C. (2005). Laminar nanofluid flow in microheat-sinks. International Journal of Heat and Mass Transfer, 48(13), 2652–2661. https://doi.org/10.1016/j.ijheattransfer.2005.01.029 Furukawa, T., Ito, M., Izawa, K., & Noori, M. N. (2005). System identification of base-isolated building using seismic response data. Journal of Engineering Mechanics, 131(3), 268–275. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:3(268) Cheng, L., Kuznetsov, A. V., & Sandeep, K. P. (2005). Mathematical modelling of two-phase non-Newtonian flow in a helical pipe. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 48(6), 649–670. https://doi.org/10.1002/fld.950 Wan, Q., & Kuznetsov, A. V. (2005). Investigation of hysteresis in acoustically driven channel flow at ultrasonic frequency. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 47(2), 137–146. https://doi.org/10.1080/1047780590885873 Wu, F., & Yildizoglu, S. E. (2005). Distributed parameter-dependent modeling and control of flexible structures. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 127(2), 230–239. https://doi.org/10.1115/1.1898240 Zhang, Z., Kleinstreuer, C., Donohue, J. F., & Kim, C. S. (2005). Comparison of micro- and nano-size particle depositions in a human upper airway model. JOURNAL OF AEROSOL SCIENCE, 36(2), 211–233. https://doi.org/10.1016/j.jaerosci.2004.08.006 Li, Z. H., & Kleinstreuer, C. (2005). Blood flow and structure interactions in a stented abdominal aortic aneurysm model. MEDICAL ENGINEERING & PHYSICS, 27(5), 369–382. https://doi.org/10.1016/j.medengphy.2004.12.003 Ramasubramanian, M. K., & Jackson, S. D. (2005). A sensor for measurement of friction coefficient on moving flexible surfaces. IEEE SENSORS JOURNAL, 5(5), 844–849. https://doi.org/10.1109/JSEN.2005.845205