Mechanical and Aerospace Engineering - 2013 Lamont, J. A., Ekkad, S. V., & Anne Alvin, M. (2013). Effect of Rotation on Detailed Heat Transfer Distribution for Various Rib Geometries in Developing Channel Flow. Journal of Heat Transfer, 136(1). https://doi.org/10.1115/1.4025211 Reagle, C. J., Delimont, J. M., Ng, W. F., & Ekkad, S. V. (2013). Study of Microparticle Rebound Characteristics Under High Temperature Conditions. Journal of Engineering for Gas Turbines and Power, 136(1). https://doi.org/10.1115/1.4025346 Reagle, C. J., Delimont, J. M., Ng, W. F., & Ekkad, S. V. (2013). Study of microparticle rebound characteristics under high temperature conditions. Proceedings of the ASME Turbo Expo, 2. https://doi.org/10.1115/GT2013-95083 Lamont, J., Chatterjee, K., Ekkad, S. V., Ledezma, G., Kaminski, C., & Tolpadi, A. (2013). Heat transfer in multiple parallel high aspect ratio ducts with triangular trench enhancement features. ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3. https://doi.org/10.1115/HT2013-17325 Lamont, J., Ramesh, S., Ekkad, S. V., Tolpadi, A., Kaminski, C., & Salamah, S. (2013). Heat Transfer Enhancement in Narrow Diverging Channels. Journal of Turbomachinery, 135(4). https://doi.org/10.1115/1.4007740 Carmack, A., Ekkad, S., Kim, Y., Moon, H.-K., & Srinivasan, R. (2013). Comparison of Flow and Heat Transfer Distributions in a Can Combustor for Radial and Axial Swirlers Under Cold Flow Conditions. Journal of Thermal Science and Engineering Applications, 5(3). https://doi.org/10.1115/1.4023890 Ramesh, S., LeBlanc, C., Ekkad, S. V., & Alvin, M. A. (2013). Tripod hole geometry performance for a vane suction surface near throat location. Proceedings of the ASME Turbo Expo, 3. https://doi.org/10.1115/GT2013-94459 Ramesh, S., Leblanc, C., Ekkad, S., & Alvin, M. A. (2013). Thermo-mechanical analysis of various film cooling hole geometries. ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3. https://doi.org/10.1115/HT2013-17423 Numerical modeling of fluid flow and thermal behavior in geothermal heat exchangers. (2013). ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 6 B. https://doi.org/10.1115/IMECE2013-65098 Parida, P. R., Ekkad, S. V., & Ngo, K. (2013). Multi-Layer Mini-Channel and Ribbed Mini-Channel Based High Performance Cooling Configurations for Automotive Inverters—Part A: Design and Evaluation. Journal of Thermal Science and Engineering Applications, 5(3). https://doi.org/10.1115/1.4023604 Phinney, L. M., & Ekkad, S. (2013). Foreword. Journal of Heat Transfer, 135(6). https://doi.org/10.1115/1.4023545 LeBlanc, C., Narzary, D. P., & Ekkad, S. (2013). Film-Cooling Performance of Antivortex Hole on a Flat Plate. Journal of Turbomachinery, 135(6). https://doi.org/10.1115/1.4023436 Pandit, J., Thompson, M., Ekkad, S. V., & Huxtable, S. (2013). Experimental investigation of heat transfer across a thermoelectric generator for waste heat recovery from automobile exhaust. ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 1. https://doi.org/10.1115/HT2013-17438 Gomez-Ramirez, D., Srinivasan, S., Ramesh, S., Miranda, M., Ekkad, S. V., & Alvin, M. A. (2013). Experimental and computational evaluation of flow characteristics for advanced film cooling hole geometries. ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3. https://doi.org/10.1115/HT2013-17463 Roy, A., Blot, D. M., Ekkad, S. V., Ng, W. F., Lohaus, A. S., & Crawford, M. E. (2013). Effect of upstream purge slot on a transonic turbine blade passage: Part 2 - Heat transfer performance. Proceedings of the ASME Turbo Expo, 3. https://doi.org/10.1115/GT2013-94581 Blot, D. M., Roy, A., Ekkad, S. V., Ng, W., Lohaus, A. S., & Crawford, M. E. (2013). Effect of upstream purge slot on a transonic turbine blade passage: Part 1 - Aerodynamic performance. Proceedings of the ASME Turbo Expo, 3. https://doi.org/10.1115/GT2013-94591 Xue, S., Roy, A., Ng, W. F., & Ekkad, S. V. (2013). Comparison of data processing techniques for convective heat transfer measurements in a transient transonic hot wind tunnel. ASME 2013 Gas Turbine India Conference, GTINDIA 2013. https://doi.org/10.1115/GTINDIA2013-3733 Ekkad, S., & Han, J.-C. (2013). A review of hole geometry and coolant density effect on film cooling. ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3. https://doi.org/10.1115/HT2013-17250 Phinney, L. M., & Ekkad, S. V. (2013). 75th Anniversary Special Issues. Journal of Thermal Science and Engineering Applications, 5(2), 020301. https://doi.org/10.1115/1.4023582 Blanchard, R., Wickersham, A., Yeaton, I., Fleischman, C., Ekkad, S., Ng, W., … Lowe, T. (2013). Test capabilities in the CCAPS/CSDL augmentor development facility. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013. https://doi.org/10.2514/6.2013-32 LeBlanc, C. N., Ramesh, S., Ekkad, S. V., & Alvin, M. A. (2013). Effect of hole exit shaping on film cooling performance for tripod hole injection over a flat surface. Proceedings of the ASME Turbo Expo, 3. https://doi.org/10.1115/GT2013-94456 Roy, A., Blot, D., Ekkad, S., Ng, W. F., Lohaus, A. S., & Crawford, M. E. (2013). Effect of endwall contouring in presence of upstream leakage flow in a transonic turbine blade passage: Heat transfer measurements. 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 1 PartF. https://doi.org/10.2514/6.2013-3635 Liu, G., Agarwal, G., Lattimer, B., & Ekkad, S. (2013). Biomass/coal co-pyrolysis and co-combustion characterization. 8th US National Combustion Meeting 2013, 3, 2584–2591. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84943399074&partnerID=MN8TOARS Fong, R.-Y., Tsai, R., Lin, Y.-C., & Ou, C.-C. (2013). High Performance Yacht Design with Abaqus. SIMULIA Community Conference. Transport Category Aircraft Certification Flight Test Guide. (2013). Civil Airplane Flight Test Introduction for Special Flight Service and Ground Support Condition. (2013). McLaughlin, L. A., & Zikry, M. A. (2013). The mechanics and stability of gold nanoparticle-oligo-ligand-DNA systems. Materials Research Society Symposium Proceedings, 1513, 6–11. https://doi.org/10.1557/opl.2013.501 Labarbera, D., & Zikry, M. A. (2013). Microstructural behavior of energetic crystalline aggregates. Materials Research Society Symposium Proceedings, 1526, 24–29. https://doi.org/10.1557/opl.2013.503 Stan, N., Bailey, D., Chadderdon, S., Selfridge, R. H., Schultz, S. M., Webb, S., … Zikry, M. (2013). High dynamic range high sensitivity FBG interrogation. Proceedings of SPIE - The International Society for Optical Engineering, 8694. https://doi.org/10.1117/12.2009875 Barth, C. A., Tafreshi, H. V., & Gad-el-Hak, M. (2013). Convective Air Mass Transfer in Submerged Superhydrophobic Surfaces: Turbulent Flow. Bulletin of the American Physical Society, 58(18), 349. Fotovati, S., Saleh, A., Tafreshi, H. V., & Pourdeyhimi, B. (2013, May 6). Modeling Depth and Surface Dust-Loading in Pleated Air Filters. Presented at the American Filtration and Separation Society, Bloomington, Minnesota. Barth, C., Samaha, M., Tafreshi, H., & Gad-el-Hak, M. (2013). Convective Mass Transfer From Submerged Superhydrophobic Surfaces. International Journal of Flow Control, 5(2), 79–88. https://doi.org/10.1260/1756-8250.5.2.79 Emami, B., Fotovati, S., Amrei, M. M., & Tafreshi, H. V. (2013). On the effects of fiber orientation in permeability of fibrous media to power-law fluids. International Journal of Heat and Mass Transfer, 60, 375–379. https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.025 Bucher, T. M., Tafreshi, H. V., & Tepper, G. C. (2013). Modeling performance of thin fibrous coatings with orthogonally layered nanofibers for improved aerosol filtration. Powder Technology, 249, 43–53. https://doi.org/10.1016/j.powtec.2013.07.023 Barth, C., Samaha, M., Tafreshi, H., & Gad-el-Hak, M. (2013). Convective Mass Transfer From Submerged Superhydrophobic Surfaces: Turbulent Flow. International Journal of Flow Control, 5(3-4), 143–152. https://doi.org/10.1260/1756-8250.5.3-4.143 Arambakam, R., Tafreshi, H. V., & Pourdeyhimi, B. (2013). Dual-scale 3-D approach for modeling radiative heat transfer in fibrous insulations. International Journal of Heat and Mass Transfer, 64, 1109–1117. https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.047 Chen, M. (Ed.). (2013). Civil Airplane Flight Test Introduction for Special Flight Service and Ground Support Condition. Shanghai: Shanghai Jiaotong University Press. Chen, M. (2013). Transport Category Aircraft Certification Flight Test Guide. Shanghai: Shanghai Jiaotong University Press. Bucher, T. M., & Vahedi Tafreshi, H. (2013). On applications and limitations of one-dimensional capillarity formulations for media with heterogeneous wettability. Applied Physics Letters, 102(24). https://doi.org/10.1063/1.4811167 Samaha, M. A., Vahedi Tafreshi, H., & Gad-el-Hak, M. (2013). Novel method to characterize superhydrophobic coatings. Journal of Colloid and Interface Science, 395(1), 315–321. https://doi.org/10.1016/j.jcis.2012.12.066 Arambakam, R., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2013). A simple simulation method for designing fibrous insulation materials. Materials and Design, 44, 99–106. https://doi.org/10.1016/j.matdes.2012.07.058 Emami, B., Hemeda, A. A., Amrei, M. M., Luzar, A., Gad-el-Hak, M., & Vahedi Tafreshi, H. (2013). Predicting longevity of submerged superhydrophobic surfaces with parallel grooves. Physics of Fluids, 25(6). https://doi.org/10.1063/1.4811830 Saleh, A. M., Hosseini, S. A., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2013). 3-D microscale simulation of dust-loading in thin flat-sheet filters: A comparison with 1-D macroscale simulations. Chemical Engineering Science, 99, 284–291. https://doi.org/10.1016/j.ces.2013.06.007 Lee, A. J., Wang, Y., & Inman, D. J. (2013). Power harvesting prediction of piezoelectric stack actuator from a shock event. Proceedings of the ASME Design Engineering Technical Conference, 8. https://doi.org/10.1115/DETC2013-12776 Pan, S., Kota, A. K., Mabry, J. M., & Tuteja, A. (2013). Superomniphobic Surfaces for Effective Chemical Shielding. Journal of the American Chemical Society, 135(2), 578–581. https://doi.org/10.1021/ja310517s Yagüe, J. L., Yin, J., Boyce, M. C., & Gleason, K. K. (2013). Design of Ordered Wrinkled Patterns with Dynamically Tuned Properties. Physics Procedia, 46, 40–45. https://doi.org/10.1016/j.phpro.2013.07.043 Rabiei, A. (Ed.). (2013). Metal Foams 2013. In Metals (Vol. 3). Basel, Switzerland: MDPI. Ngaile, G. (2013). Hydroforming Tribology. In Encyclopedia of Tribology (pp. 1765–1774). https://doi.org/10.1007/978-0-387-92897-5_1067 Perkins, E., & Balachandran, B. (2013). Noise-influenced dynamics of a vertically excited pendulum. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V07BT10A025-V07BT10A025. Perkins, E., Chabalko, C., & Balachandran, B. (2013). Noise-influenced transient energy localization in an oscillator array. Nonlinear Theory and Its Applications, IEICE, 4(3), 232–243. Hervas, J. R., & Reyhanoglu, M. (2013). Control and stabilization of a third-order nonholonomic system. Proceedings of the 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013), 17–22. https://doi.org/10.1109/ICCAS.2013.6703856 Rubio Hervas, J., Reyhanoglu, M., & Tang, H. (2013). Thrust-vector control of a three-axis stabilized spacecraft with fuel slosh dynamics. 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013). Presented at the 2013 13th International Conference on Control, Automaton and Systems (ICCAS), Gwangju, South Korea. https://doi.org/10.1109/iccas.2013.6704015 Rubio Hervas, J., & Reyhanoglu, M. (2013). Observer-based nonlinear control of slosh in liquid container transfer via a PPR robot. 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013). Presented at the 2013 13th International Conference on Control, Automaton and Systems (ICCAS), Gwangju, South Korea. https://doi.org/10.1109/iccas.2013.6704018 Reyhanoglu, M., & Rubio Hervas, J. (2013). Nonlinear modeling and control of slosh in liquid container transfer via a PPR robot. Communications in Nonlinear Science and Numerical Simulation, 18(6), 1481–1490. https://doi.org/10.1016/j.cnsns.2012.10.006 Ota, S., Wang, S., Ryu, J., Wang, Y., Chen, Y., & Zhang, X. (2013). Intracellular delivery of top-down fabricated tunable nano-plasmonic resonators. Nanoscale, 5(21), 10179. https://doi.org/10.1039/c3nr02910g Steinmetz, S. A., Fang, T., & Roberts, W. L. (2013). Soot measurements in high-pressure laminar diffusion flames. Fall Technical Meeting of the Eastern States Section of the Combustion Institute 2013, 318–323. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946216954&partnerID=MN8TOARS Steinmetz, S. A., Fang, T. G., & Roberts, W. L. (2013). Soot measurements in diluted high pressure laminar ethylene co-flow flames. Proceedings of the 9th Asia-Pacific Conference on Combustion, ASPACC 2013. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84905457491&partnerID=MN8TOARS Jing, W., Roberts, W. L., & Fang, T. (2013). Comparison of spray combustion for Jet-A and diesel in a constant volume chamber. Fall Technical Meeting of the Eastern States Section of the Combustion Institute 2013, 477–482. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946237266&partnerID=MN8TOARS Webb, S. C., Shin, P., & Peters, K. (2013). Fusion of Global and Local Measurements of Damage in Bonded Joints. In Fracture and Fatigue, Volume 7 (pp. 13–19). https://doi.org/10.1007/978-3-319-00765-6_3 Kieffer, T. P., & Zhu, Y. (2013). Thermal Output Observations from Fe-Ni-Cr Metal Foil Strain Gages. In Advancement of Optical Methods in Experimental Mechanics, Volume 3 (pp. 379–387). https://doi.org/10.1007/978-3-319-00768-7_48 Mannava, S., Plate, J. F., Tuohy, C. J., Seyler, T. M., Whitlock, P. W., Curl, W. W., … Saul, K. R. (2013). The science of rotator cuff tears: translating animal models to clinical recommendations using simulation analysis. Knee Surgery, Sports Traumatology, Arthroscopy, 21(7), 1610–1619. https://doi.org/10.1007/S00167-012-2145-9 Hervas, J. R., & Reyhanoglu, M. (2013). On the nonlinear modeling of systems with higher-order nonholonomic constraints. 2013 13th International Conference on Control, Automation and Systems (ICCAS 2013). Presented at the 2013 13th International Conference on Control, Automaton and Systems (ICCAS). https://doi.org/10.1109/iccas.2013.6704064 MacKunis, W., Subramanian, S., Mehta, S., Ton, C., Curtis, J. W., & Reyhanoglu, M. (2013). Robust nonlinear aircraft tracking control using synthetic jet actuators. 52nd IEEE Conference on Decision and Control. Presented at the 2013 IEEE 52nd Annual Conference on Decision and Control (CDC). https://doi.org/10.1109/cdc.2013.6759885 Reyhanoglu, M., Alvarado, J., & Carmi, A. (2013). Estimation of debris hazard areas due to a space vehicle breakup at high altitudes. 2013 9th Asian Control Conference (ASCC). Presented at the 2013 9th Asian Control Conference (ASCC). https://doi.org/10.1109/ascc.2013.6606025 Hervas, J. R., & Reyhanoglu, M. (2013). Controllability and stabilizability of higher-order nonholonomic systems. 2013 9th Asian Control Conference (ASCC). Presented at the 2013 9th Asian Control Conference (ASCC). https://doi.org/10.1109/ascc.2013.6606065 Reyhanoglu, M., & Alvarado, J. (2013). Estimation of debris dispersion due to a space vehicle breakup during reentry. Acta Astronautica, 86, 211–218. https://doi.org/10.1016/j.actaastro.2013.01.018 Samson, J., Katebi, R., & Vermillion, C. (2013). A Critical Assessment of Airborne Wind Energy Systems. 2nd IET Renewable Power Generation Conference (RPG 2013). Presented at the 2nd IET Renewable Power Generation Conference (RPG 2013). https://doi.org/10.1049/cp.2013.1852 Kalabic, U., Vermillion, C., & Kolmanovsky, I. (2013). Reference governor design for computationally efficient attitude and tether tension constraint enforcement on a lighter-than-air wind energy system. 2013 European Control Conference (ECC). Presented at the 2013 European Control Conference (ECC). https://doi.org/10.23919/ecc.2013.6669490 Vermillion, C. (2013). Altitude and Crosswind Motion Control for Optimal Power-Point Tracking in Tethered Wind Energy Systems With Airborne Power Generation. Volume 3: Nonlinear Estimation and Control; Optimization and Optimal Control; Piezoelectric Actuation and Nanoscale Control; Robotics and Manipulators; Sensing; System Identification (Estimation for Automotive Applications, Modeling, Therapeutic Control in Bio-Systems); Variable Structure/Sliding-Mode Control; Vehicles and Human Robotics; Vehicle Dynamics and Control; Vehicle Path Planning and Collision Avoidance; Vibrational and Mechanical Systems; Wind Energy Systems and Control. Presented at the ASME 2013 Dynamic Systems and Control Conference. https://doi.org/10.1115/dscc2013-3796 Vermillion, C., & Fagiano, L. (2013). Electricity in the Air: Tethered Wind Energy Systems. Mechanical Engineering, 135(09), S13–S21. https://doi.org/10.1115/1.2013-sep-5 Vermillion, C., Glass, B., & Rein, A. (2013). Lighter-Than-Air Wind Energy Systems. In Airborne Wind Energy (pp. 501–514). https://doi.org/10.1007/978-3-642-39965-7_30 Reagle, C. J., Delimont, J. M., Ng, W. F., Ekkad, S. V., & Rajendran, V. P. (2013). Measuring the coefficient of restitution of high speed microparticle impacts using a PTV and CFD hybrid technique. Measurement Science and Technology, 24(10), 105303. https://doi.org/10.1088/0957-0233/24/10/105303 Grace, L. R., & Altan, M. C. (2013). Non-fickian three-dimensional hindered moisture absorption in polymeric composites: Model development and validation. Polymer Composites, 34(7), 1144–1157. https://doi.org/10.1002/PC.22523 Plate, J. F., Bates, C. M., Mannava, S., Smith, T. L., Jorgensen, M. J., Register, T. C., … Tuohy, C. J. (2013). Age-related degenerative functional, radiographic, and histological changes of the shoulder in nonhuman primates. Journal of Shoulder and Elbow Surgery, 22(8), 1019–1029. https://doi.org/10.1016/j.jse.2012.11.004 Crouch, D. L., Plate, J. F., Li, Z., & Saul, K. R. (2013). Biomechanical Contributions of Posterior Deltoid and Teres Minor in the Context of Axillary Nerve Injury: A Computational Study. The Journal of Hand Surgery, 38(2), 241–249. https://doi.org/10.1016/j.jhsa.2012.11.007 Plate, J. F., Wiggins, W. F., Haubruck, P., Scott, A. T., Smith, T. L., Saul, K. R., & Mannava, S. (2013). Normal aging alters in vivo passive biomechanical response of the rat gastrocnemius-Achilles muscle–tendon unit. Journal of Biomechanics, 46(3), 450–455. https://doi.org/10.1016/j.jbiomech.2012.11.007 Justusson, B., Pankow, M., Heinrich, C., Rudolph, M., & Waas, A. M. (2013). Use of a shock tube to determine the bi-axial yield of an aluminum alloy under high rates. International Journal of Impact Engineering, 58, 55–65. https://doi.org/10.1016/J.IJIMPENG.2013.01.012 Gampert, M., Schaefer, P., Narayanaswamy, V., & Peters, N. (2013). Gradient trajectory analysis in a Jet flow for turbulent combustion modelling. Journal of Turbulence, 14(1), 147–164. https://doi.org/10.1080/14685248.2012.747688 Gampert, M., Narayanaswamy, V., Schaefer, P., & Peters, N. (2013). Conditional statistics of the turbulent/non-turbulent interface in a jet flow. Journal of Fluid Mechanics, 731, 615–638. https://doi.org/10.1017/JFM.2013.327 Di, J., Price, J., Gu, X., Jiang, X., Jing, Y., & Gu, Z. (2013). Ultrasound-Triggered Regulation of Blood Glucose Levels Using Injectable Nano-Network. Advanced Healthcare Materials, 3(6), 811–816. https://doi.org/10.1002/ADHM.201300490 Kota, A. K., Mabry, J. M., & Tuteja, A. (2013). Superoleophobic surfaces: design criteria and recent studies. Surface Innovations, 1(2), 71–83. https://doi.org/10.1680/si.12.00017 Kota, A. K., Choi, W., & Tuteja, A. (2013). Superomniphobic surfaces: Design and durability. MRS Bulletin, 38(5), 383–390. https://doi.org/10.1557/mrs.2013.101 Kota, A. K., & Tuteja, A. (2013). High-efficiency, ultrafast separation of emulsified oil–water mixtures. NPG Asia Materials, 5(8), e58–e58. https://doi.org/10.1038/am.2013.34 Yoon, J., Kota, A., Bhaskar, S., Tuteja, A., & Lahann, J. (2013). Amphiphilic Colloidal Surfactants Based on Electrohydrodynamic Co-jetting. ACS Applied Materials & Interfaces, 5(21), 11281–11287. https://doi.org/10.1021/am403516h Luan, K., Sun, B., & Gu, B. (2013). Ballistic impact damages of 3-D angle-interlock woven composites based on high strain rate constitutive equation of fiber tows. International Journal of Impact Engineering, 57, 145–158. https://doi.org/10.1016/j.ijimpeng.2013.02.003 Ngaile, G., Kinsey, B. L., & Kapoor, S. G. (2013). Editorial. Journal of Manufacturing Processes, 15(2), 181–182. https://doi.org/10.1016/J.JMAPRO.2013.02.005 Alzahrani, B., Ngaile, G., & Yang, C. (2013). Part 1: Analytical modeling of symmetric multi-nose tube hydroforming. Journal of Manufacturing Processes, 15(2), 273–286. https://doi.org/10.1016/J.JMAPRO.2013.01.004 Alzahrani, B., & Ngaile, G. (2013). Part 2: Analytical modeling of regular planar polygon tube hydroforming as a special case of symmetric multi-nose tube hydroforming. Journal of Manufacturing Processes, 15(2), 287–297. https://doi.org/10.1016/J.JMAPRO.2013.01.002 Lee, W. M., Mazzoleni, A. P., & Zikry, M. A. (2013). Aerodynamic effects on the accuracy of an end-over-end kick of an American football. Sports Engineering, 16(2), 99–113. https://doi.org/10.1007/S12283-012-0110-Y Wu, Q., Shanthraj, P., & Zikry, M. A. (2013). Modeling the heterogeneous effects of retained austenite on the behavior of martensitic high strength steels. International Journal of Fracture, 184(1-2), 241–252. https://doi.org/10.1007/S10704-013-9879-3 Ultralow Thermal Conductivity of Atomic/Molecular Layer-Deposited Hybrid Organic–Inorganic Zincone Thin Films. (2013). Nano Letters. https://doi.org/10.1021/nl403244s Thermoelectric Transport Across Nanoscale Polymer–Semiconductor–Polymer Junctions. (2013). The Journal of Physical Chemistry C. https://doi.org/10.1021/jp4084019 Simultaneous measurement of thermal conductivity and heat capacity of bulk and thin film materials using frequency-dependent transient thermoreflectance method. (2013). Review of Scientific Instruments. https://doi.org/10.1063/1.4797479 Mirgolbabaei, H., & Echekki, T. (2013). A novel principal component analysis-based acceleration scheme for LES-ODT: An a priori study. 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84881421712&partnerID=MN8TOARS Huang, S., & Huang, H.-Y. S. (2013). Virtualisation of stress distribution in heart valve tissue. Computer Methods in Biomechanics and Biomedical Engineering, 17(15), 1696–1704. https://doi.org/10.1080/10255842.2013.763937 Freese, D., Shao, G., & Xu, C. (2013). Polymer-derived ceramic sensors for temperature measurement in harsh environment. Proceedings of the ASME Turbo Expo, 4. https://doi.org/10.1115/GT2013-96031 Li, J., Liu, J., Liu, J., Ji, Y., & Xu, C. (2013). Experimental investigation on the machinability of SiC nano-particles reinforced magnesium nanocomposites during micro-milling processes. International Journal of Manufacturing Research, 8(1), 64–84. https://doi.org/10.1504/IJMR.2013.051840 Lojewski, B., Yang, W., Duan, H., Xu, C., & Deng, W. (2013). Design, fabrication, and characterization of linear multiplexed electrospray atomizers micro-machined from metal and polymers. Aerosol Science and Technology, 47(2), 146–152. https://doi.org/10.1080/02786826.2012.734936 Liu, J., Li, J., & Xu, C. (2013). Cutting force prediction on micromilling magnesium metal matrix composites with nanoreinforcements. Journal of Micro and Nano-Manufacturing, 1(1). https://doi.org/10.1115/1.4023286 Zhao, R., & Xu, C. (2013). Analytical modeling and experimental validation of force ripple and friction force for general direct drive systems. ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, MSEC 2013, 2. https://doi.org/10.1115/MSEC2013-1058 Huang, H.-Y. S., Huang, S., Gettys, T., Prim, P., & Harrysson, O. (2013). A Biomechanical Study of Directional Mechanical Properties of Porcine Skin Tissues. Proceedings of the ASME International Mechanical Engineering Congress and Exposition. Presented at the San Diego, CA. https://doi.org/10.1115/IMECE2013-63829 Shao, G., Freese, D., Xu, C., & An, L. (2013). Polymer Derived Ceramic Sensors for Ultra-High Temperature Application. Presented at the 37th International Conference and Exposition on Advanced Ceramics and Composites, Combustion Institute, Daytona, FL. Granlund, K. O., Ol, M. V., & Bernal, L. P. (2013). Unsteady pitching flat plates. JOURNAL OF FLUID MECHANICS, 733. https://doi.org/10.1017/jfm.2013.444 Granlund, K., Ol, M., & Bernal, L. (2013). Experiments on free-to-pivot hover motions of flat plates. Journal of Fluids and Structures, 40, 337–355. Candler, G. V., Subbareddy, P. K., & Nompelis, I. (2013, May). Decoupled Implicit Method for Aerothermodynamics and Reacting Flows. AIAA JOURNAL, Vol. 51, pp. 1245–1254. https://doi.org/10.2514/1.j052070 Yuan, C. Z., & Wu, F. (2013). Robust control of switched linear systems via min of quadratics. Proceedings of the ASME 2013 Dynamic Systems and Control Conference (DSCC2013), vol. 1. https://doi.org/10.1115/dscc2013-3715 Wang, Z., Li, S., Jiang, X., Liu, R., & Geng, X. (2013). Design, fabrication and characterization of a bi-frequency co-linear array (7.5MHz/15MHz). 2013 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), pp. 504–507. https://doi.org/10.1109/ultsym.2013.0131 Albers, L., & Bottomley, L. (2013). The heart of a successful education - one journey through graduate school. Proceedings of the American Society for Engineering Education. Albers, L., Bottomley, L., & Parry, E. (2013). The creation, evolution and impact of a GK-12 outreach model. Proceedings of the American Society for Engineering Education. Duan, C., & Wu, F. (2013). NEW RESULTS ON CONTINUOUS-TIME SWITCHED LINEAR SYSTEMS WITH ACTUATOR SATURATION. ASME 2013 DYNAMIC SYSTEMS AND CONTROL CONFERENCE, VOL 2. https://doi.org/10.1115/dscc2013-3789 Roise, J. P., Catts, G., Hazel, D., A. Hobbs A., & Hopkins, C. (2013). Balancing biomass harvesting and drying tactics with delivered payment practice. In Technical Report- Not held in TRLN member libraries. Greenville, S.C.: US Endowment for Forestry and Community. Shin, P. H., Webb, S. C., & Peters, K. J. (2013). Nondestructive inspection in adhesive-bonded joint CFRP using pulsed phase thermography. THERMOSENSE: THERMAL INFRARED APPLICATIONS XXXV, Vol. 8705. https://doi.org/10.1117/12.2018414 Kolanjiyil, A. V., & Kleinstreuer, C. (2013). Nanoparticle Mass Transfer From Lung Airways to Systemic Regions-Part II: Multi-Compartmental Modeling. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 135(12). https://doi.org/10.1115/1.4025333 Kolanjiyil, A. V., & Kleinstreuer, C. (2013). Nanoparticle Mass Transfer From Lung Airways to Systemic Regions-Part I: Whole-Lung Aerosol Dynamics. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 135(12). https://doi.org/10.1115/1.4025332 Johnson, J. A., Kim, K., Zhang, S., Wu, D., & Jiang, X. (2013). High-temperature (> 1000 degrees C) acoustic emission sensor. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2013, Vol. 8694. https://doi.org/10.1117/12.2009301 Feng, Y., & Kleinstreuer, C. (2013). DDPM-DEM simulations of particulate flows in human tracheobronchial airways. ASME 2013 International Mechanical Engineering Congress & Exposition. Southwell, J. T., Hall, C. E., & Burke, D. A. (2013). Correlation of population density to designated urban areas. Journal of Aerospace Information Systems, 10(1), 40–46. Stano, K. L., Chapla, R., Carroll, M., Nowak, J., McCord, M., & Bradford, P. D. (2013). Copper-Encapsulated Vertically Aligned Carbon Nanotube Arrays. ACS APPLIED MATERIALS & INTERFACES, 5(21), 10774–10781. https://doi.org/10.1021/am402964e Kuznetsov, I. A., & Kuznetsov, A. V. (2013). Analytical comparison between Nixon-Logvinenko's and Jung-Brown's theories of slow neurofilament transport in axons. MATHEMATICAL BIOSCIENCES, 245(2), 331–339. https://doi.org/10.1016/j.mbs.2013.08.001 Ramesh, K., Gopalarathnam, A., Edwards, J. R., Ol, M. V., & Granlund, K. (2013). An unsteady airfoil theory applied to pitching motions validated against experiment and computation. Theoretical and Computational Fluid Dynamics, 27(6), 843–864. https://doi.org/10.1007/s00162-012-0292-8 Nield, D. A., & Kuznetsov, A. V. (2013). The Onset of Double-Diffusive Convection in a Vertical Cylinder With Vertical Throughflow. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(3). https://doi.org/10.1115/1.4007859 Ouyang, J., McDonald, M., & Zhu, Y. (2013). Temperature-dependent material properties of Z-shaped MEMS thermal actuators made of single crystalline silicon. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 23(12). https://doi.org/10.1088/0960-1317/23/12/125036 Ford, J. P., Thapaliya, N., Kelly, M. J., Roberts, W. L., & Lamb, H. H. (2013). Semi-Batch Deoxygenation of Canola- and Lard-Derived Fatty Acids to Diesel-Range Hydrocarbons. ENERGY & FUELS, 27(12), 7489–7496. https://doi.org/10.1021/ef4016763 Jing, W., & Fang, T. (2013). Note on a New Blackbody Fraction Function Used for Surfaces With a Linear Emissivity in a Wavelength Interval. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(5). https://doi.org/10.1115/1.4023393 Foster, G., & Ferguson, S. (2013). Exploring the Effectiveness of Using Graveyard Data When Generating Design Alternatives. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, 13(4). https://doi.org/10.1115/1.4024913 Molaei, R., Bayati, R., Nori, S., Kumar, D., Prater, J. T., & Narayan, J. (2013). Diamagnetic to ferromagnetic switching in VO2 epitaxial thin films by nanosecond excimer laser treatment. Applied Physics Letters, 103(25). Han, K., Lee, W.-H., Kleinstreuer, C., & Koo, J. (2013). Critical Invalidation of Temperature Dependence of Nanofluid Thermal Conductivity Enhancement. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(5). https://doi.org/10.1115/1.4023544 Nield, D. A., & Kuznetsov, A. V. (2013). An Historical and Topical Note on Convection in Porous Media. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(6). https://doi.org/10.1115/1.4023567 Gampert, M., Narayanaswamy, V., & Peters, N. (2013). Scalar gradient trajectory measurements using high-frequency cinematographic planar Rayleigh scattering. EXPERIMENTS IN FLUIDS, 54(12). https://doi.org/10.1007/s00348-013-1621-4 Xu, F., Yuan, F.-G., Liu, L., Hu, J., & Qiu, Y. (2013). Performance Prediction and Demonstration of a Miniature Horizontal Axis Wind Turbine. JOURNAL OF ENERGY ENGINEERING, 139(3), 143–152. https://doi.org/10.1061/(asce)ey.1943-7897.0000125 Kribs, J., Moore, N., Hasan, T., & Lyons, K. (2013). Nitrogen-diluted methane flames in the near-and far-field. Journal of Energy Resources Technology, 135(4). Kuznetsov, A. V. (2013). Modelling of axonal cargo rerouting in a dendrite. MATHEMATICAL MEDICINE AND BIOLOGY-A JOURNAL OF THE IMA, 30(3), 273–285. https://doi.org/10.1093/imammb/dqs021 Wu, Q., Shanthraj, P., & Zikry, M. (2013). Modeling the heterogeneous effects of retained austenite on the behavior of martensitic high strength steels. International Journal of Fracture, 184(1-2), 241–252. https://doi.org/10.1007/978-3-319-04397-5_16 Jiang, X., Huang, W., & Zhang, S. (2013). [Review of Flexoelectric nano-generator: Materials, structures and devices]. NANO ENERGY, 2(6), 1079–1092. https://doi.org/10.1016/j.nanoen.2013.09.001 He, J., & Yuan, F. G. (2013). Damage identification for composite structures using a cross-correlation reverse-time migration technique. Structural Health Monitoring 2013, Vols 1 and 2, 2185–2193. Pankow, M., Yen, C. F., & Waas, A. M. (2013). Comparison of 2D and 3D composites to confined crush loading. Proceedings of the American Society for Composites. Webb, S., Shin, P., Peters, K., Zikry, M., Schultz, S., & Selfridge, R. (2013). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber bragg grating sensors. Structural Health Monitoring 2013, Vols 1 and 2, 1953–1960. Chang, T.-H., & Zhu, Y. (2013). A microelectromechanical system for thermomechanical testing of nanostructures. APPLIED PHYSICS LETTERS, 103(26). https://doi.org/10.1063/1.4858962 Huang, S., & Huang, H.-Y. S. (2013). Tissue- and cell-levels stress distribution of heart valve tissue during diastole. Proceedings of the ASME International Mechanical Engineering Congress and Exposition. Presented at the San Diego, CA. https://doi.org/10.1115/imece2013-63229 ChiuHuang, C.-K., & Shadow Huang, H.-Y. (2013). Stress Evolution on the Phase Boundary in LiFePO4Particles. Journal of The Electrochemical Society, 160(11), A2184–A2188. https://doi.org/10.1149/2.079311jes Song, X., Ren, Z., & Wu, F. (2013). Gain-scheduling compensator synthesis for output regulation of nonlinear systems. 2013 american control conference (acc), 6078–6083. https://doi.org/10.1109/acc.2013.6580791 ChiuHuang, C.-K., Zhou, C., & Huang, H.-Y. S. (2013). Exploring lithium-ion intensity and distribution via a Time-of-Flight Secondary Ion Mass Spectroscopy. ASME International Mechanical Engineering Congress and Exposition Proceeding, IMECE2013-63013. https://doi.org/10.1115/imece2013-63013 Huang, H.-Y. S., Huang, S., Gettys, T. A., & Harrysson, O. (2013). A biomechanical study of directional mechanical properties of porcine skin tissues. ASME 2013 International Mechanical Engineering Congress & Exposition. LaBarbera, D. A., & Zikry, M. A. (2013). The effects of microstructural defects on hot spot formation in cyclotrimethylenetrinitramine-polychlorotrifluoroethylene energetic aggregates. JOURNAL OF APPLIED PHYSICS, 113(24). https://doi.org/10.1063/1.4811684 Kuznetsov, A. V., & Nield, D. A. (2013). The Effect of Vertical Throughflow on the Onset of Convection Induced by Internal Heating in a Layered Porous Medium. TRANSPORT IN POROUS MEDIA, 100(1), 101–114. https://doi.org/10.1007/s11242-013-0207-1 Nield, D. A., & Kuznetsov, A. V. (2013). The Effect of Pulsating Deformation on the Onset of Convection in a Porous Medium. TRANSPORT IN POROUS MEDIA, 98(3), 713–724. https://doi.org/10.1007/s11242-013-0168-4 Nield, D. A., & Kuznetsov, A. V. (2013). The Effect of Heterogeneity on the Onset of Double-Diffusive Convection Induced by Internal Heating in a Porous Medium: A Layered Model. TRANSPORT IN POROUS MEDIA, 100(1), 83–99. https://doi.org/10.1007/s11242-013-0206-2 Yao, S., & Fang, T. (2013). Spray characteristics of a swirl atomiser in trigger sprayers using water-ethanol mixtures. CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 91(7), 1312–1324. https://doi.org/10.1002/cjce.21821 Gurarslan, A., Shen, J., & Tonelli, A. E. (2013). Single-component poly(epsilon-caprolactone) composites. POLYMER, 54(21), 5747–5753. https://doi.org/10.1016/j.polymer.2013.08.017 Crews, J. H., McMahan, J. A., Smith, R. C., & Hannen, J. C. (2013). Quantification of parameter uncertainty for robust control of shape memory alloy bending actuators. SMART MATERIALS AND STRUCTURES, 22(11). https://doi.org/10.1088/0964-1726/22/11/115021 Wang, W.-C., Natelson, R. H., Stikeleather, L. F., & Roberts, W. L. (2013). Product sampling during transient continuous countercurrent hydrolysis of canola oil and development of a kinetic model. COMPUTERS & CHEMICAL ENGINEERING, 58, 144–155. https://doi.org/10.1016/j.compchemeng.2013.06.003 Nield, D. A., & Kuznetsov, A. V. (2013). Optimization of Forced Convection Heat Transfer in a Composite Porous Medium Channel. TRANSPORT IN POROUS MEDIA, 99(2), 349–357. https://doi.org/10.1007/s11242-013-0189-z Nield, D. A., & Kuznetsov, A. V. (2013). Onset of Convection with Internal Heating in a Weakly Heterogeneous Porous Medium. TRANSPORT IN POROUS MEDIA, 98(3), 543–552. https://doi.org/10.1007/s11242-013-0158-6 Nield, D. A., & Kuznetsov, A. V. (2013). Onset of Convection with Internal Heating in a Porous Medium Saturated by a Nanofluid. TRANSPORT IN POROUS MEDIA, 99(1), 73–83. https://doi.org/10.1007/s11242-013-0174-6 Barry, J. A., Robichaud, G., & Muddiman, D. C. (2013). Mass Recalibration of FT-ICR Mass Spectrometry Imaging Data Using the Average Frequency Shift of Ambient Ions. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 24(7), 1137–1145. https://doi.org/10.1007/s13361-013-0659-0 Xiang, N., Escolano, J., Navarro, J. M., & Jing, Y. (2013). Investigation on the effect of aperture sizes and receiver positions in coupled rooms. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 133(6), 3975–3985. https://doi.org/10.1121/1.4802740 Sun, Y., Padbury, R. P., Akyildiz, H. I., Goertz, M. P., Palmer, J. A., & Jur, J. S. (2013). Influence of Subsurface Hybrid Material Growth on the Mechanical Properties of Atomic Layer Deposited Thin Films on Polymers. CHEMICAL VAPOR DEPOSITION, 19(4-6), 134–141. https://doi.org/10.1002/cvde.201207042 Halbur, J. C., Padbury, R. P., & Jur, J. S. (2013). Induced wetting of polytetrafluoroethylene by atomic layer deposition for application of aqueous-based nanoparticle inks. MATERIALS LETTERS, 101, 25–28. https://doi.org/10.1016/j.matlet.2013.03.063 Liu, W., Zhao, H., Yong, Z., Xu, G., Wang, X., Xu, F., … Qiu, Y. (2013). Improving mechanical and electrical properties of oriented polymer-free multi-walled carbon nanotube paper by spraying while winding. COMPOSITES PART B-ENGINEERING, 53, 342–346. https://doi.org/10.1016/j.compositesb.2013.05.043 Nield, D. A., & Kuznetsov, A. V. (2013). Forced Convection Past a Rotating Sphere: Modeling Oxygen Transport to a Pond Snail Embryo. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(12). https://doi.org/10.1115/1.4024871 Kwon, S. R., Huang, W. B., Zhang, S. J., Yuan, F. G., & Jiang, X. N. (2013). Flexoelectric sensing using a multilayered barium strontium titanate structure. SMART MATERIALS AND STRUCTURES, 22(11). https://doi.org/10.1088/0964-1726/22/11/115017 Nield, D. A., Kuznetsov, A. V., & Simmons, C. T. (2013). Deep Saline Fluids in Geologic Basins: The Possible Role of the Soret Effect. TRANSPORT IN POROUS MEDIA, 99(2), 297–305. https://doi.org/10.1007/s11242-013-0186-2 Lim, S. D., Mazzoleni, A. P., Park, J.-kyoo, Ro, P. I., & Quinlan, B. (2013). Conceptual Design of Ocean Compressed Air Energy Storage System. MARINE TECHNOLOGY SOCIETY JOURNAL, 47(2), 70–81. https://doi.org/10.4031/mtsj.47.2.5 Foss, J., Dewhurst, R., Yacoot, A., Regtien, P., & Peters, K. (2013, July). Announcing the 2012 Measurement Science and Technology Outstanding Paper Awards. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 24. https://doi.org/10.1088/0957-0233/24/7/070101 Kuznetsov, A. V. (2013). An analytical solution describing the propagation of positive injury signals in an axon: effect of dynein velocity distribution. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 16(7), 699–706. https://doi.org/10.1080/10255842.2011.632376 Yan, X., Huang, W., Kwon, S. R., Yang, S., Jiang, X., & Yuan, F.-G. (2013). A sensor for the direct measurement of curvature based on flexoelectricity. SMART MATERIALS AND STRUCTURES, 22(8). https://doi.org/10.1088/0964-1726/22/8/085016 Zhang, X. A., Elek, J., & Chang, C.-H. (2013). Three-Dimensional Nanolithography Using Light Scattering from Colloidal Particles. ACS NANO, 7(7), 6212–6218. https://doi.org/10.1021/nn402637a Kuznetsov, A. V., & Nield, D. A. (2013). The Cheng-Minkowycz problem for natural convective boundary layer flow in a porous medium saturated by a nanofluid: A revised model. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 65, 682–685. https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.054 Chang, W.-Y., Huang, W., Bagal, A., Chang, C.-H., Tian, J., Han, P., & Jiang, X. (2013). Study on dielectric and piezoelectric properties of 0.7 Pb(Mg1/3Nb2/3)O-3-0.3 PbTiO3 single crystal with nano-patterned composite electrode. JOURNAL OF APPLIED PHYSICS, 114(11). https://doi.org/10.1063/1.4821517 Kuznetsov, A. V. (2013). Protein transport in the connecting cilium of a photoreceptor cell: Modeling the effects of bidirectional protein transitions between the diffusion-driven and motor-driven kinetic states. COMPUTERS IN BIOLOGY AND MEDICINE, 43(6), 758–764. https://doi.org/10.1016/j.compbiomed.2013.03.009 Jian, W. W., Cheng, G. M., Xu, W. Z., Koch, C. C., Wang, Q. D., Zhu, Y. T., & Mathaudhu, S. N. (2013). Physics and model of strengthening by parallel stacking faults. APPLIED PHYSICS LETTERS, 103(13). https://doi.org/10.1063/1.4822323 Park, J.-kyoo, & Ro, P. I. (2013). Noncontact Manipulation of Light Objects Based on Parameter Modulations of Acoustic Pressure Nodes. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 135(3). https://doi.org/10.1115/1.4023816 Kleinstreuer, C., & Feng, Y. (2013). [Review of Lung Deposition Analyses of Inhaled Toxic Aerosols in Conventional and Less Harmful Cigarette Smoke: A Review]. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 10(9), 4454–4485. https://doi.org/10.3390/ijerph10094454 Hannen, J. C., & Buckner, G. D. (2013). Indirect intelligent sliding mode control using hysteretic recurrent neural networks with application to a shape memory alloy actuated beam. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol 1, 295–303. https://doi.org/10.1115/smasis2012-7930 Yan, X., Zhu, R., Huang, G., & Yuan, F.-G. (2013). Focusing guided waves using surface bonded elastic metamaterials. APPLIED PHYSICS LETTERS, 103(12). https://doi.org/10.1063/1.4821258 Xu, T.-B., Siochi, E. J., Kang, J. H., Zuo, L., Zhou, W., Tang, X., & Jiang, X. (2013). Energy harvesting using a PZT ceramic multilayer stack. SMART MATERIALS AND STRUCTURES, 22(6). https://doi.org/10.1088/0964-1726/22/6/065015 Jing, W., Roberts, W. L., & Fang, T. (2013). Effects of Ambient Temperature and Oxygen Concentration on Diesel Spray Combustion Using a Single-Nozzle Injector in a Constant Volume Combustion Chamber. COMBUSTION SCIENCE AND TECHNOLOGY, 185(9), 1378–1399. https://doi.org/10.1080/00102202.2013.798315 Cheng, G. M., Xu, W. Z., Jian, W. W., Yuan, H., Tsai, M. H., Zhu, Y. T., … Millett, P. C. (2013). Dislocations with edge components in nanocrystalline bcc Mo. Journal of Materials Research, 28(13), 1820–1826. https://doi.org/10.1557/jmr.2012.403 Crews, J. H., Smith, R. C., & Hannen, J. C. (2013). Development of robust control algorithms for shape memory alloy bending actuators. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol 1, 391–400. https://doi.org/10.1115/smasis2012-7989 Ma, J., Guo, S., Wu, D., Geng, X., & Jiang, X. (2013). Design, Fabrication, and Characterization of a Single-Aperture 1.5-MHz/3-MHz Dual-Frequency HIFU Transducer. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 60(7), 1519–1529. https://doi.org/10.1109/tuffc.2013.2724 Parness, A., & McKenzie, C. (2013). DROP: the durable reconnaissance and observation platform. Industrial Robot-an International Journal, 40(3), 218–223. Mahian, O., Kianifar, A., Kleinstreuer, C., Al-Nimr, M. A., Pop, I., Sahin, A. Z., & Wongwises, S. (2013). [Review of A review of entropy generation in nanofluid flow]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 65, 514–532. https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.010 Srivastava, S., & Echekki, T. (2013). A novel Kalman filter based approach for multiscale reacting flow simulations. COMPUTERS & FLUIDS, 81, 1–9. https://doi.org/10.1016/j.compfluid.2013.04.008 Wang, T., & Jing, Y. (2013). Transcranial ultrasound imaging with speed of sound-based phase correction: a numerical study. PHYSICS IN MEDICINE AND BIOLOGY, 58(19), 6663–6681. https://doi.org/10.1088/0031-9155/58/19/6663 Kim, K., & Jiang, X. (2013). Tissue characterization using an acoustic wave tactile sensor array. HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2013, Vol. 8695. https://doi.org/10.1117/12.2009518 Pawar, S. S., & Peters, K. (2013). Through-the-thickness identification of impact damage in composite laminates through pulsed phase thermography. MEASUREMENT SCIENCE AND TECHNOLOGY, 24(11). https://doi.org/10.1088/0957-0233/24/11/115601 Kuznetsov, A. V. (2013). The onset of bio-thermal convection induced by a combined effect of gyrotactic and oxytactic microorganisms. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 23(6), 979–1000. https://doi.org/10.1108/hff-09-2011-0178 Guo, S., Jing, Y., & Jiang, X. (2013). Temperature Rise in Tissue Ablation Using Multi-Frequency Ultrasound. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 60(8), 1699–1707. https://doi.org/10.1109/tuffc.2013.2751 Duan, C., & Wu, F. (2013). Robust Switched Filtering for Time-Varying Polytopic Uncertain Systems. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 135(6). https://doi.org/10.1115/1.4025027 Bryant, M., Gomez, J. C., & Garcia, E. (2013). Reduced-Order Aerodynamic Modeling of Flapping Wing Energy Harvesting at Low Reynolds Number. AIAA JOURNAL, 51(12), 2771–2782. https://doi.org/10.2514/1.j052364 Rabiei, A., & Sandukas, S. (2013). Processing and evaluation of bioactive coatings on polymeric implants. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 101(9), 2621–2629. https://doi.org/10.1002/jbm.a.34557 Wu, F., & Hays, S. (2013). Nonlinear gain-scheduling output-feedback control for polynomial nonlinear systems subject to actuator saturation. INTERNATIONAL JOURNAL OF CONTROL, 86(9), 1607–1619. https://doi.org/10.1080/00207179.2013.792001 Zdanowicz, E., Dow, T. A., Scattergood, R. O., & Youssef, K. (2013). Nanostructure fabrication on germanium and silicon by nanocoining imprint technique. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879. https://doi.org/10.1016/j.precisioneng.2013.05.004 Xu, W., Zhang, Y., Cheng, G., Jian, W., Millett, P. C., Koch, C. C., … Zhu, Y. (2013). In-situ atomic-scale observation of irradiation-induced void formation. NATURE COMMUNICATIONS, 4. https://doi.org/10.1038/ncomms3288 Yan, X., Zhu, R., Huang, G. L., & Yuan, F. G. (2013). Focusing flexural Lamb waves by designing elastic metamaterials bonded on a plate. HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2013, Vol. 8695. https://doi.org/10.1117/12.2009506 Yang, S. W., & Wu, F. (2013). Feedback design for saturated polynomial nonlinear systems via higher order Lyapunov functions. Proceedings of the ASME 5th Annual Dynamic Systems and Control Division Conference and JSME 11th Motion and Vibration Conference, DSCC 2012, vol 2, 645–652. https://doi.org/10.1115/dscc2012-movic2012-8644 Xu, S., Rezvanian, O., & Zikry, M. A. (2013). Electrothermomechanical Modeling and Analyses of Carbon Nanotube Polymer Composites. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 135(2). https://doi.org/10.1115/1.4023912 Ma, J., Wang, Z., & Jiang, X. (2013). Design, fabrication and test of a small aperture, dual frequency ultrasound transducer. HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2013, Vol. 8695. https://doi.org/10.1117/12.2009716 Gargi, D., Kline, R. J., DeLongchamp, D. M., Fischer, D. A., Toney, M. F., & Brendan T. O'Connor. (2013). Charge Transport in Highly Face-On Poly(3-hexylthiophene) Films. JOURNAL OF PHYSICAL CHEMISTRY C, 117(34), 17421–17428. https://doi.org/10.1021/jp4050644 Kuznetsov, A. V. (2013). An exact solution of transient equations describing slow axonal transport. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 16(11), 1232–1239. https://doi.org/10.1080/10255842.2012.662679 Palagummi, S., & Yuan, F. G. (2013). A vibration energy harvester using diamagnetic levitation. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2013, Vol. 8688. https://doi.org/10.1117/12.2009657 Kuznetsov, A. V., & Nield, D. A. (2013). The Effect of Strong Heterogeneity on the Onset of Convection Induced by Internal Heating in a Porous Medium: A Layered Model. TRANSPORT IN POROUS MEDIA, 99(1), 85–100. https://doi.org/10.1007/s11242-013-0175-5 Webb, S., Shin, P., Peters, K., Selfridge, R., & Schultz, S. (2013). Nondestructive inspection of CFRP adhesively bonded joints using embedded FBG sensors. FIBER OPTIC SENSORS AND APPLICATIONS X, Vol. 8722. https://doi.org/10.1117/12.2018443 Pawar, S., & Peters, K. (2013). Hybrid imaging of damage progress in composites through thermal imaging and embedded sensing. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2013, Vol. 8693. https://doi.org/10.1117/12.2010016 Zhu, R., Huang, G. L., & Yuan, F. G. (2013). Fast damage imaging using the time-reversal technique in the frequency-wavenumber domain. SMART MATERIALS AND STRUCTURES, 22(7). https://doi.org/10.1088/0964-1726/22/7/075028 Bagal, A., & Chang, C.-H. (2013). Fabrication of subwavelength periodic nanostructures using liquid immersion Lloyd's mirror interference lithography. OPTICS LETTERS, 38(14), 2531–2534. https://doi.org/10.1364/ol.38.002531 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2013). Effects of ambient oxygen concentration on biodiesel and diesel spray combustion under simulated engine conditions. ENERGY, 57, 722–732. https://doi.org/10.1016/j.energy.2013.05.063 Yan, X., Huang, W. B., Kwon, S. R., Yang, S. R., Jiang, X. N., & Yuan, F. G. (2013). Design of a curvature sensor using a flexoelectric material. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2013, Vol. 8692. https://doi.org/10.1117/12.2009941 Kleinstreuer, C., & Feng, Y. (2013). [Review of Computational Analysis of Non-Spherical Particle Transport and Deposition in Shear Flow With Application to Lung Aerosol Dynamics-A Review]. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 135(2). https://doi.org/10.1115/1.4023236 Webb, S., Shin, P., Peters, K., Zikry, M. A., Chadderdon, S., Stan, N., … Schultz, S. (2013). Characterization of fatigue damage in adhesively bonded lap joints through dynamic, full-spectral interrogation of fiber Bragg grating sensors. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2013, Vol. 8693. https://doi.org/10.1117/12.2010018 Feng, Y., & Kleinstreuer, C. (2013). Analysis of non-spherical particle transport in complex internal shear flows. PHYSICS OF FLUIDS, 25(9). https://doi.org/10.1063/1.4821812 Xu, T.-B., Tolliver, L., Jiang, X., & Su, J. (2013). A single crystal lead magnesium niobate-lead titanate multilayer-stacked cryogenic flextensional actuator. APPLIED PHYSICS LETTERS, 102(4). https://doi.org/10.1063/1.4790142 Luo, H., Xia, Y., Spiegel, S., Nourgaliev, R., & Jiang, Z. (2013). A reconstructed discontinuous Galerkin method based on a Hierarchical WENO reconstruction for compressible flows on tetrahedral grids. Journal of Computational Physics, 236, 477–492. https://doi.org/10.1016/j.jcp.2012.11.026 Lane, B. M., Dow, T. A., & Scattergood, R. (2013). Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel. WEAR, 300(1-2), 216–224. https://doi.org/10.1016/j.wear.2013.02.012 Wu, M., Jasper, W. J., Kuznetsov, A. V., Johnson, N., & Rasipurarn, S. C. (2013). Submicron particle filtration in monolith filters - A modeling and experimental study. JOURNAL OF AEROSOL SCIENCE, 57, 96–113. https://doi.org/10.1016/j.jaerosci.2012.09.002 Harrington, J. T., McMullen, R. J., Jr., Clode, A. B., & Gilger, B. C. (2013). Phacoemulsification and +14 diopter intraocular lens placement in a Saddlebred foal. VETERINARY OPHTHALMOLOGY, 16(2), 140–148. https://doi.org/10.1111/j.1463-5224.2012.01032.x Shi, Q., Vitchuli, N., Nowak, J., Jiang, S., Caldwell, J. M., Breidt, F., … McCord, M. (2013). Multifunctional and Durable Nanofiber-Fabric-Layered Composite for Protective Application. JOURNAL OF APPLIED POLYMER SCIENCE, 128(2), 1219–1226. https://doi.org/10.1002/app.38465 Webb, S., Peters, K., Zikry, M. A., Chadderdon, S., Nikola, S., Selfridge, R., & Schultz, S. (2013). Full-Spectral Interrogation of Fiber Bragg Grating Sensors Exposed to Steady-State Vibration. EXPERIMENTAL MECHANICS, 53(4), 513–530. https://doi.org/10.1007/s11340-012-9661-x Rabiei, A., & Garcia-Avila, M. (2013). Effect of various parameters on properties of composite steel foams under variety of loading rates. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 564, 539–547. https://doi.org/10.1016/j.msea.2012.11.108 Kailasanathan, R. K. A., Yelverton, T. L. B., Fang, T., & Roberts, W. L. (2013). Effect of diluents on soot precursor formation and temperature in ethylene laminar diffusion flames. COMBUSTION AND FLAME, 160(3), 656–670. https://doi.org/10.1016/j.combustflame.2012.11.004 Harrington, J. T., McMullen, R. J., Jr., Cullen, J. M., Campbell, N. B., & Gilger, B. C. (2013). Diode laser endoscopic cyclophotocoagulation in the normal equine eye. VETERINARY OPHTHALMOLOGY, 16(2), 97–110. https://doi.org/10.1111/j.1463-5224.2012.01035.x Kuznetsov, A. V. (2013). Analytical modelling of retrograde transport of nerve growth factors in an axon: a transient problem. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 16(1), 95–102. https://doi.org/10.1080/10255842.2011.607445 Mirgolbabaei, H., & Echekki, T. (2013). A novel principal component analysis-based acceleration scheme for LES-ODT: An a priori study. COMBUSTION AND FLAME, 160(5), 898–908. https://doi.org/10.1016/j.combustflame.2013.01.007 Kuznetsov, I. A., & Kuznetsov, A. V. (2013). A compartmental model of neuropeptide circulation and capture between the axon soma and nerve terminals. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 29(5), 574–585. https://doi.org/10.1002/cnm.2542 Xu, S., Rezvanian, O., Peters, K., & Zikry, M. A. (2013). The viability and limitations of percolation theory in modeling the electrical behavior of carbon nanotube-polymer composites. NANOTECHNOLOGY, 24(15). https://doi.org/10.1088/0957-4484/24/15/155706 Qin, Q., & Zhu, Y. (2013). Temperature control in thermal microactuators with applications to in-situ nanomechanical testing. APPLIED PHYSICS LETTERS, 102(1). https://doi.org/10.1063/1.4773359 Wu, F., & Cai, X. (2013). Switching fault-tolerant control of a flexible air-breathing hypersonic vehicle. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 227(I1), 24–38. https://doi.org/10.1177/0959651812453914 Zu, M., Li, Q., Zhu, Y., Zhu, Y., Wang, G., Byun, J.-H., & Chou, T.-W. (2013). Stress relaxation in carbon nanotube-based fibers for load-bearing applications. CARBON, 52, 347–355. https://doi.org/10.1016/j.carbon.2012.09.036 Lamige, S., Min, J., Galizzi, C., Andre, F., Baillot, F., Escudie, D., & Lyons, K. M. (2013). On preheating and dilution effects in non-premixed jet flame stabilization. COMBUSTION AND FLAME, 160(6), 1102–1111. https://doi.org/10.1016/j.combustflame.2013.01.026 Gangadharan, S., Sanghavi, R. S., Kuznetsov, A. V., & Jasper, W. J. (2013). Modeling of Flow Through a Sandwiched Monolith Filter. PARTICULATE SCIENCE AND TECHNOLOGY, 31(3), 226–233. https://doi.org/10.1080/02726351.2012.715614 Shanthraj, P., & Zikry, M. A. (2013). Microstructurally induced fracture nucleation and propagation in martensitic steels. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 61(4), 1091–1105. https://doi.org/10.1016/j.jmps.2012.11.006 Durham, J. W., III, & Zhu, Y. (2013). Fabrication of Functional Nanowire Devices on Unconventional Substrates Using Strain-Release Assembly. ACS APPLIED MATERIALS & INTERFACES, 5(2), 256–261. https://doi.org/10.1021/am302384z Pearson, J. D., LaBarbera, D., Prabhugoud, M., Peters, K., & Zikry, M. A. (2013). Experimental and Computational Investigation of Low-Impact Velocity and Quasi-Static Failure of PMMA. EXPERIMENTAL MECHANICS, 53(1), 53–66. https://doi.org/10.1007/s11340-012-9650-0 Winfrey, A. L., Abd Al-Halim, M. A., Saveliev, A. V., Gilligan, J. G., & Bourham, M. A. (2013). Enhanced Performance of Electrothermal Plasma Sources as Fusion Pellet Injection Drivers and Space Based Mini-Thrusters via Extension of a Flattop Discharge Current. JOURNAL OF FUSION ENERGY, 32(3), 371–377. https://doi.org/10.1007/s10894-012-9578-5 Steinmetz, S. A., Herrington, J. S., Winterrowd, C. K., Roberts, W. L., Wendt, J. O. L., & Linak, W. P. (2013). Crude glycerol combustion: Particulate, acrolein, and other volatile organic emissions. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 34, 2749–2757. https://doi.org/10.1016/j.proci.2012.07.050 Tschida, C. E., & Silverberg, L. M. (2013). Cellular growth algorithms for shape design of truss structures. COMPUTERS & STRUCTURES, 116, 1–6. https://doi.org/10.1016/j.compstruc.2012.10.006 Nield, D. A., & Kuznetsov, A. V. (2013). A note on modeling high speed flow in a bidisperse porous medium. Transport in Porous Media, 96(3), 495–499. https://doi.org/10.1007/s11242-012-0102-1 Nield, D. A., & Kuznetsov, A. V. (2013). The Onset of Convection in a Layered Porous Medium with Vertical Throughflow. TRANSPORT IN POROUS MEDIA, 98(2), 363–376. https://doi.org/10.1007/s11242-013-0148-8 Tsai, M.-H., Yuan, H., Cheng, G., Xu, W., Jian, W. W., Chuang, M.-H., … Zhu, Y. (2013). Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy. INTERMETALLICS, 33, 81–86. https://doi.org/10.1016/j.intermet.2012.09.022 Hang, C.-W., Zhang, Z., & Singh, M. P. (2013). Shin: Generalized Trust Propagation with Limited Evidence. COMPUTER, 46(3), 78–85. https://doi.org/10.1109/mc.2012.116 Chen, C., Peters, K., & Li, Y. (2013). Self-healing sandwich structures incorporating an interfacial layer with vascular network. SMART MATERIALS AND STRUCTURES, 22(2). https://doi.org/10.1088/0964-1726/22/2/025031 Pantokratoras, A., & Fang, T. (2013). Sakiadis flow with nonlinear Rosseland thermal radiation. PHYSICA SCRIPTA, 87(1). https://doi.org/10.1088/0031-8949/87/01/015703 Furst, S. J., Bumgarner, D., & Seelecke, S. (2013). Quantification of the effectiveness of various adhesives in holding an SMA actuator wire during joule heating. Journal of Adhesion, 89(4), 301–322. Kuznetsov, A. V. (2013). Numerical investigation of axonal cargo rerouting in a dendrite: A three kinetic state model. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 29(3), 428–443. https://doi.org/10.1002/cnm.2521 Tsai, M.-H., Yuan, H., Cheng, G., Xu, W., Tsai, K.-Y., Tsai, C.-W., … Zhu, Y. T. (2013). Morphology, structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high-entropy alloy. INTERMETALLICS, 32, 329–336. https://doi.org/10.1016/j.intermet.2012.07.036 Tu, J. F., & Riley, P. E. B. (2013). Low-temperature evaporative glass scoring using a single-mode ytterbium fiber laser. OPTICS AND LASERS IN ENGINEERING, 51(6), 696–706. https://doi.org/10.1016/j.optlaseng.2013.01.005 Robichaud, G., Barry, J. A., Garrard, K. P., & Muddiman, D. C. (2013). Infrared Matrix-Assisted Laser Desorption Electrospray Ionization (IR-MALDESI) Imaging Source Coupled to a FT-ICR Mass Spectrometer. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 24(1), 92–100. https://doi.org/10.1007/s13361-012-0505-9 Xu, S., Rezvanian, O., & Zikry, M. A. (2013). Electro-mechanical modeling of the piezoresistive response of carbon nanotube polymer composites. SMART MATERIALS AND STRUCTURES, 22(5). https://doi.org/10.1088/0964-1726/22/5/055032 Awartani, O., Lemanski, B. I., Ro, H. W., Richter, L. J., DeLongchamp, D. M., & Brendan T. O'Connor. (2013). Correlating Stiffness, Ductility, and Morphology of Polymer:Fullerene Films for Solar Cell Applications. ADVANCED ENERGY MATERIALS, 3(3), 399–406. https://doi.org/10.1002/aenm.201200595 Fang, T., & Jing, W. (2013). Closed-form analytical solutions of flow and heat transfer for an unsteady rear stagnation-point flow. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 62(1), 55–62. https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.049 Vitchuli, N., Shi, Q., Nowak, J., Nawalakhe, R., Sieber, M., Bourham, M., … McCord, M. (2013). Atmospheric plasma application to improve adhesion of electrospun nanofibers onto protective fabric. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 27(8), 924–938. https://doi.org/10.1080/01694243.2012.727164 Yang, Q., Zhang, X. A., Bagal, A., Guo, W., & Chang, C.-H. (2013). Antireflection effects at nanostructured material interfaces and the suppression of thin-film interference. NANOTECHNOLOGY, 24(23). https://doi.org/10.1088/0957-4484/24/23/235202 Wang, X. Y., Palagummi, S., Liu, L., & Yuan, F. G. (2013). A magnetically levitated vibration energy harvester. SMART MATERIALS AND STRUCTURES, 22(5). https://doi.org/10.1088/0964-1726/22/5/055016 Shanthraj, P., & Zikry, M. A. (2013). The effects of microstructure and morphology on fracture nucleation and propagation in martensitic steel alloys. MECHANICS OF MATERIALS, 58, 110–122. https://doi.org/10.1016/j.mechmat.2012.11.010 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2013). Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamber. APPLIED ENERGY, 107, 52–65. https://doi.org/10.1016/j.apenergy.2013.02.023 ChiuHuang, C.-K., Stamps, M. A., & Huang, H.-Y. S. (2013). Mechanics of Diffusion-Induced Fractures in Lithium-ion Battery Materials. Materials Research Soaciety 2013 Spring Meeting, 1541, 1541–F04-04. San Francisco, CA. Robichaud, G., Garrard, K. P., Barry, J. A., & Muddiman, D. C. (2013). MSiReader: An Open-Source Interface to View and Analyze High Resolving Power MS Imaging Files on Matlab Platform. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 24(5), 718–721. https://doi.org/10.1007/s13361-013-0607-z Mal, S., Nori, S., Narayan, J., Prater, J. T., & Avasthi, D. K. (2013). Ion-irradiation-induced ferromagnetism in undoped ZnO thin films. ACTA MATERIALIA, 61(8), 2763–2768. https://doi.org/10.1016/j.actamat.2012.09.071 Tolliver, L., Xu, T.-B., & Jiang, X. (2013). Finite element analysis of the piezoelectric stacked-HYBATS transducer. SMART MATERIALS AND STRUCTURES, 22(3). https://doi.org/10.1088/0964-1726/22/3/035015 Jing, Y., Cannata, J., & Wang, T. (2013). Experimental verification of transient nonlinear acoustical holography. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 133(5), 2533–2540. https://doi.org/10.1121/1.4796120 Xu, Z., Lu, L., Shi, B., & Yuan, F. (2013). Experimental and numerical studies on vertical properties of a new multi-dimensional earthquake isolation and mitigation device. SHOCK AND VIBRATION, 20(3), 401–410. https://doi.org/10.1155/2013/325387 Nash, D. G., Swanson, N. B., Preston, W. T., Yelverton, T. L. B., Roberts, W. L., Wendt, J. O. L., & Linak, W. P. (2013). Environmental implications of iron fuel borne catalysts and their effects on diesel particulate formation and composition. JOURNAL OF AEROSOL SCIENCE, 58, 50–61. https://doi.org/10.1016/j.jaerosci.2013.01.001 Hartl, A. E., Miller, B. N., & Mazzoleni, A. P. (2013). Dynamics of a dissipative, inelastic gravitational billiard. PHYSICAL REVIEW E, 87(3). https://doi.org/10.1103/physreve.87.032901 Chen, C., Li, Y., & Yuan, F.-G. (2013). Development of time-reversal method for impact source identification on plate structures. SHOCK AND VIBRATION, 20(3), 561–573. https://doi.org/10.1155/2013/312169 Nield, D. A., & Kuznetsov, A. V. (2013). A note on the variation of nanofluid viscosity with temperature. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 41, 17–18. https://doi.org/10.1016/j.icheatmasstransfer.2012.11.001 Liu, L., & Yuan, F. G. (2013). Diamagnetic levitation for nonlinear vibration energy harvesting: Theoretical modeling and analysis. JOURNAL OF SOUND AND VIBRATION, 332(2), 455–464. https://doi.org/10.1016/j.jsv.2012.08.004 Chen, P.-C., Wang, W.-C., Roberts, W. L., & Fang, T. (2013). Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system. Fuel, 103, 850–861. https://doi.org/10.1016/j.fuel.2012.08.013 Narayanaswamy, V., & Clemens, N. T. (2013). Simultaneous LII and PIV measurements in the soot formation region of turbulent non-premixed jet flames. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 34(1), 1455–1463. https://doi.org/10.1016/j.proci.2012.06.018 Bohon, M. D., & Roberts, W. L. (2013). NOx emissions from high swirl turbulent spray flames with highly oxygenated fuels. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 34, 1705–1712. https://doi.org/10.1016/j.proci.2012.07.064 Kailasanathan, R. K. A., Book, E. K., Fang, T., & Roberts, W. L. (2013). Hydrocarbon species concentrations in nitrogen diluted ethylene-air laminar jet diffusion flames at elevated pressures. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 34(1), 1035–1043. https://doi.org/10.1016/j.proci.2012.06.148 Yin, M., Natelson, R. H., Campos, A. A., Kolar, P., & Roberts, W. L. (2013). Aromatization of n-octane over Pd/C catalysts. FUEL, 103, 408–413. https://doi.org/10.1016/j.fuel.2012.06.095 Kuznetsov, A. V. (2013). Modeling transport of a pulse of radiolabeled organelles in a Drosophila unipolar motor neuron. JOURNAL OF BIOLOGICAL PHYSICS, 39(1), 145–158. https://doi.org/10.1007/s10867-012-9292-6