Mechanical and Aerospace Engineering - 2017

Sarkar, S., Patel, R. L., Liang, X., & Park, J. (2017). Unveiling the Role of CeO2 Atomic Layer Deposition Coatings on LiMn2O4 Cathode Materials: An Experimental and Theoretical Study. ACS Applied Materials  Interfaces. https://doi.org/10.1021/acsami.7b06988

Carter, D. (2017). Insect Residue Height for Different Conditions and Coatings. GEM Consortium Annual Board Meeting Technical Presentation Competition. Presented at the GEM Consortium Annual Board Meeting Technical Presentation Competition.

Lam, K.-Y., Pickles, J. D., Narayanaswamy, V., Carter, C. D., & Kimmel, R. L. (2017). High-speed schlieren and 10-Hz Kr PLIF for the new AFRL mach-6 Ludwieg tube hypersonic wind tunnel. AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2017-0550

Pickles, J. D., Mettu, B. R., Subbareddy, P. K., & Narayanaswamy, V. (2017). Sharp-fin induced shock wave/turbulent boundary layer interactions in an axisymmetric configuration. 47th AIAA Fluid Dynamics Conference, 2017. https://doi.org/10.2514/6.2017-4314

Ley, K., & Narayanaswamy, V. (2017). Parametric study of forced ignition in laminar and turbulent methane jets. 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. https://doi.org/10.2514/6.2017-4770

Funderburk, M. L., & Narayanaswamy, V. (2017). Experimental investigation of shock boundary layer interactions in axisymmetric isolator geometries. 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. https://doi.org/10.2514/6.2017-5052

Ji, Y., Singh, P., Ekkad, S. V., & Zang, S. (2017). Numerical investigation of scoop effect on film cooling for cylindrical inclined hole. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8. https://doi.org/10.1115/IMECE2017-70184

Kedukodi, S., Park, S., Gadiraju, S., Ekkad, S., Kim, Y., & Srinivasan, R. (2017). Numerical & experimental investigations for flow fields under non-reacting & reacting conditions through a lean premixed fuel nozzle. Proceedings of the ASME Turbo Expo, 5C-2017. https://doi.org/10.1115/GT2017-64911

Gomez-Ramirez, D., Ekkad, S. V., Moon, H.-K., Kim, Y., & Srinivasan, R. (2017). Isothermal coherent structures and turbulent flow produced by a gas turbine combustor lean pre-mixed swirl fuel nozzle. Experimental Thermal and Fluid Science, 81, 187–201. https://doi.org/10.1016/j.expthermflusci.2016.10.010

Singh, P., Ji, Y., Zhang, M., & Ekkad, S. V. (2017). Heat transfer enhancement by criss-cross pattern formed by 45° Angled rib turbulators in a straight square duct. ASME 2017 Heat Transfer Summer Conference, HT 2017, 1. https://doi.org/10.1115/HT2017-4908

Roy, A., Jain, S., Ekkad, S. V., Ng, W., Lohaus, A. S., Crawford, M. E., & Abraham, S. (2017). Heat Transfer Performance of a Transonic Turbine Blade Passage in the Presence of Leakage Flow Through Upstream Slot and Mateface Gap With Endwall Contouring. Journal of Turbomachinery, 139(12). https://doi.org/10.1115/1.4037909

Ramesh, S., LeBlanc, C., Narzary, D., Ekkad, S., & Anne Alvin, M. (2017). Film Cooling Performance of Tripod Antivortex Injection Holes Over the Pressure and Suction Surfaces of a Nozzle Guide Vane. Journal of Thermal Science and Engineering Applications, 9(2). https://doi.org/10.1115/1.4035290

Singh, P., & Ekkad, S. (2017). Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples. Applied Thermal Engineering, 116, 205–216. https://doi.org/10.1016/j.applthermaleng.2017.01.098

Gomez-Ramirez, D., Kedukodi, S., Ekkad, S. V., Moon, H.-K. X., Kim, Y., & Srinivasan, R. (2017). Investigation of isothermal convective heat transfer in an optical combustor with a low-emissions swirl fuel nozzle. Applied Thermal Engineering, 114, 65–76. https://doi.org/10.1016/j.applthermaleng.2016.11.154

Park, S., Gomez-Ramirez, D., Gadiraju, S., Kedukodi, S., Ekkad, S., Moon, H.-K., … Srinivasan, R. (2017). Flow field and wall temperature measurements for reacting flow in a lean premixed swirl stabilized can combustor. Proceedings of the ASME Turbo Expo, 5C-2017. https://doi.org/10.1115/GT2017-64837

Panchal, K. V., Abraham, S., Roy, A., Ekkad, S. V., Ng, W., Lohaus, A. S., & Crawford, M. E. (2017). Effect of endwall contouring on a transonic turbine blade passage: Heat transfer performance. Journal of Turbomachinery, 139(1). https://doi.org/10.1115/1.4034411

Ekkad, S. V., & Han, J.-C. (2017). A transient liquid crystal image technique for local heat transfer distributions near a sharp 180° turn of a two-pass smooth square channel. Journal of Flow Visualization and Image Processing, 24(1-4), 127–140. https://doi.org/10.1615/jflowvisimageproc.v24.i1-4.90

Singh, P., & Ekkad, S. V. (2017). Experimental investigation of rotating rib roughened two-pass square duct with two different channel orientations. Proceedings of the ASME Turbo Expo, 5A-2017. https://doi.org/10.1115/GT2017-64225

Boulanger, A., Hutchinson, J., Ng, W. F., Ekkad, S. V., Keefe, M. J., Xu, W., … Hsu, K. (2017). Experimental based empirical model of the initial onset of sand deposits on hastelloy-X from 1000°C to 1100°C using particle tracking. Proceedings of the ASME Turbo Expo, 2D-2017. https://doi.org/10.1115/GT2017-64480

Singh, P., Li, W., Ekkad, S. V., & Ren, J. (2017). Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR = 1:2) under rotating and stationary conditions. International Journal of Heat and Mass Transfer, 113, 384–398. https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.085

Singh, P., & Ekkad, S. V. (2017). Effects of spent air removal scheme on internal-side heat transfer in an impingement-effusion system at low jet-to-target plate spacing. International Journal of Heat and Mass Transfer, 108, 998–1010. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.104

Singh, P., Pandit, J., & Ekkad, S. V. (2017). Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples. International Journal of Heat and Mass Transfer, 106, 629–647. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.037

Gadiraju, S., Park, S., Gomez-Ramirez, D., Ekkad, S. V., Todd Lowe, K., Moon, H.-K., … Srinivasan, R. (2017). Application of proper orthogonal decomposition to high speed imaging for the study of combustion oscillations. Proceedings of the ASME Turbo Expo, Part F130041-4B. https://doi.org/10.1115/GT2017-64602

Singh, P., Li, W., Ekkad, S. V., & Ren, J. (2017). A new cooling design for rib roughened two-pass channel having positive effects of rotation on heat transfer enhancement on both pressure and suction side internal walls of a gas turbine blade. International Journal of Heat and Mass Transfer, 115, 6–20. https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.128

TruongVo, T. N., Kennedy, R. M., Chen, H., Chen, A., Berndt, A., Agarwal, M., … others. (2017). Microfluidic channel for characterizing normal and breast cancer cells. Journal of Micromechanics and Microengineering, 27(3), 035017.

Amrei, M. M., & Tafreshi, H. V. (2017, September 4). Novel Approach to Measuring Droplet Detachment Force from Fibers. Presented at the Virginia Soft Matter Symposium, James Madison University.

Davoudi, M., Amrei, M. M., Chase, G. G., & Tafreshi, H. V. (2017, April 10). Droplet interactions with smooth and rough fibers. Presented at the American Filtration and Separations Society, Louisville, Kentucky.

Venkateshan, D. G., & Tafreshi, H. V. (2017, September 4). Modelling Drag Reduction and Droplet Mobility over Superhydrophobic wire screen. Presented at the Virginia Soft Matter Symposium, James Madison University.

Aziz, H., Amrei, M. M., Dotivala, A., Tang, C., & Tafreshi, H. V. (2017). Modeling Cassie droplets on superhydrophobic coatings with orthogonal fibrous structures. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 512, 61–70. https://doi.org/10.1016/j.colsurfa.2016.10.031

Amrei, M. M., Davoudi, M., Chase, G. G., & Tafreshi, H. V. (2017). Effects of roughness on droplet apparent contact angles on a fiber. Separation and Purification Technology, 180, 107–113. https://doi.org/10.1016/j.seppur.2017.02.049

Lee, A. J., Moosavian, A., & Inman, D. J. (2017). Control and characterization of a bistable laminate generated with piezoelectricity. Smart Materials and Structures, 26(8), 085007. https://doi.org/10.1088/1361-665x/aa7165

Lee, A. J., Moosavian, A., & Inman, D. J. (2017). Piezoelectrically strained bistable laminates with macro fiber composites. Proceedings of SPIE - The International Society for Optical Engineering, 10164. https://doi.org/10.1117/12.2257680

Lee, A. J., Moosavian, A., & Inman, D. J. (2017). A piezoelectrically generated bistable laminate for morphing. Materials Letters, 190, 123–126. https://doi.org/10.1016/j.matlet.2017.01.005

Moosavian, A., Chae, E. J., Pankonien, A. M., Lee, A. J., & Inman, D. J. (2017). A parametric study on a bio-inspired continuously morphing trailing edge. Proceedings of SPIE - The International Society for Optical Engineering, 10162. https://doi.org/10.1117/12.2257582

Bedewy, M., Hu, J., & Hart, A. J. (2017). Precision control of nanoparticle monolayer assembly: Optimizing rate and crystal quality. 2017 IEEE 17th International Conference on Nanotechnology, NANO 2017, 286–289. https://doi.org/10.1109/NANO.2017.8117489

Dozie-Nwachukwu, S. O., Obayemi, J. D., Danyuo, Y. T., Etuk-Udo, G., Chi, Y., Hu, J., … Soboyejo, W. O. (2017). Biosynthesis of Gold Nanoparticles and Gold/Prodigiosin Nanoparticles with Serratia marcescens Bacteria. Waste and Biomass Valorization, 8(6), 2045–2059. https://doi.org/10.1007/s12649-016-9734-7

Obayemi, J. D., Hu, J., Uzonwanne, V. O., Odusanya, O. S., Malatesta, K., Anuku, N., & Soboyejo, W. O. (2017). Adhesion of ligand-conjugated biosynthesized magnetite nanoparticles to triple negative breast cancer cells. Journal of the Mechanical Behavior of Biomedical Materials, 68, 276–286. https://doi.org/10.1016/j.jmbbm.2017.02.004

Su, H., Shang, W., Li, G., & Fischer, G. S. (2017). MRI-Guided Telesurgery System Using a Fabry-Perot Interferometry Force Sensor and a Pneumatic Haptic Device. Annals of Biomedical Engineering.

Su, H., Iordorchita, I., Tokuda, J., Hata, N., Liu, X., & Fischer, G. S. (2017). Fiber Optic Force Sensors for MRI-Guided Interventions and Rehabilitation. IEEE Sensors Journal.

Kim, H., Torres, F., Islam, T., Islam, D., Chavez, L. A., Rosales, C. A. G., … Lin, Y. (2017). Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing – CORRIGENDUM. MRS Communications, 7(4), 974–974. https://doi.org/10.1557/mrc.2017.129

Kim, H., Torres, F., Islam, M. T., Islam, M. D., Chavez, L. A., Garcia Rosales, C. A., … Lin, Y. (2017). Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing. MRS Communications, 7(4), 960–966. https://doi.org/10.1557/mrc.2017.126

Tanvir, A. N. M., Islam, M. D., & Ahmed, F. (2017). Analysis of thermoelastic characteristics in a thick walled FGM cylinder. AIP Conference Proceedings, Vol. 1919. https://doi.org/10.1063/1.5018548

Perkins, E. (2017). Stochastic Effects on a Chaotic Duffing Oscillator. Presented at the International Microelectronics Assembly and Packaging Society, 13th International Conference and Exhibition on Device Packaging, Fountain Hills, AZ.

Perkins, E. (2017). Frequency response of p-mode intrinsic localized mode. Presented at the 9th European Nonlinear Dynamics Conference, Budapest, Hungary.

Perkins, E. (2017). Effects of noise on the frequency response of the monostable Duffing oscillator. Physics Letters A, 381(11), 1009–1013.

Huang, S., Kim, T., Hou, D., Cann, D., Jones, J. L., & Jiang, X. (2017). Flexoelectric characterization of BaTiO3-0.08Bi(Zn1/2Ti1/2)O3. Applied Physics Letters, 110(22), 222904. https://doi.org/10.1063/1.4984212

Reyhanoglu, M. (Ed.). (2017). Dynamical Systems: Analytical and Computational Techniques. https://doi.org/10.5772/63189

Stebler, S., MacKunis, W., Ramos-Pedroza, N., & Reyhanoglu, M. (2017). A dynamic neural network-based sliding mode observer method for a class of uncertain dynamic systems. 2017 IEEE Conference on Control Technology and Applications (CCTA). Presented at the 2017 IEEE Conference on Control Technology and Applications (CCTA), Mauna Lai, Hawaii. https://doi.org/10.1109/CCTA.2017.8062431

Hoffman, D., Rehan, M., MacKunis, W., & Reyhanoglu, M. (2017). Robust quaternion-based nonlinear output feedback control of a quadrotor hover system. 2017 IEEE 56th Annual Conference on Decision and Control (CDC). Presented at the 2017 IEEE 56th Annual Conference on Decision and Control (CDC), Melbourne, Victoria, Australia. https://doi.org/10.1109/CDC.2017.8264379

Kayacan, E., Khanesar, M. A., Rubio-Hervas, J., & Reyhanoglu, M. (2017). Learning Control of Fixed-Wing Unmanned Aerial Vehicles Using Fuzzy Neural Networks. International Journal of Aerospace Engineering, 2017, 1–12. https://doi.org/10.1155/2017/5402809

Baheri, A., Ramaprabhu, P., & Vermillion, C. (2017). Iterative In-Situ 3D Layout Optimization of a Reconfigurable Ocean Current Turbine Array Using Bayesian Optimization. ASME 2017 Dynamic Systems and Control Conference : October 11-13, 2017, Tysons, Virginia, USA., 3. https://doi.org/10.1115/dscc2017-5230

Tang, Y., & Yin, J. (2017). Design of cut unit geometry in hierarchical kirigami-based auxetic metamaterials for high stretchability and compressibility. Extreme Mechanics Letters, 12, 77–85. https://doi.org/10.1016/j.eml.2016.07.005

Zhang, Q., Wommer, J., O’Rourke, C., Teitelman, J., Tang, Y., Robison, J., … Yin, J. (2017). Origami and kirigami inspired self-folding for programming three-dimensional shape shifting of polymer sheets with light. Extreme Mechanics Letters, 11, 111–120. https://doi.org/10.1016/j.eml.2016.08.004

Hopkins, X., Gill, W., Kringel, R., Wang, G., Hass, J., Acharya, S., … Choi, D. (2017). Radio frequency-mediated local thermotherapy for destruction of pancreatic tumors using Ni–Au core–shell nanowires. Nanotechnology, 28(3), 03LT01. https://doi.org/10.1088/1361-6528/28/3/03LT01

Baheri, A., & Vermillion, C. (2017). Context-Dependent Bayesian Optimization in Real-Time Control; A Case Study in Airborne Wind Energy Systems. Proceedings of BayesOpt 2017. Presented at the NIPS Workshop on Bayesian Optimization, Long Beach, CA.

Deodhar, N., Bafandeh, A., Deese, J., Smith, B., Muyimbwa, T., Vermillion, C., & Tkacik, P. (2017). Laboratory-Scale Flight Characterization of a Multitethered Aerostat for Wind Energy Generation. AIAA Journal, 55(6), 1823–1832. https://doi.org/10.2514/1.j054407

Deodhar, N., Deese, J., & Vermillion, C. (2017). Experimentally Infused Plant and Controller Optimization Using Iterative Design of Experiments—Theoretical Framework and Airborne Wind Energy Case Study. Journal of Dynamic Systems, Measurement, and Control, 140(1). https://doi.org/10.1115/1.4037014

Deese, J., Deodhar, N., & Vermillion, C. (2017). Nested Plant/Controller Co-Design Using G-Optimal Design and Extremum Seeking: Theoretical Framework and Application to an Airborne Wind Energy System * *This work was supported by NSF grant number 1453912, entitled CAREER: Efficient Experimental Optimization for High Performance Airborne Wind Energy Systems. IFAC-PapersOnLine, 50(1), 11965–11971. https://doi.org/10.1016/j.ifacol.2017.08.1182

Tan, K. T., Elamin, M., & Li, B. (2017). Impact performance and damage behavior of composite sandwich structures In arctic condition. 32nd Technical Conference of the American Society for Composites 2017, 2, 1309–1314. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85047767450&partnerID=MN8TOARS

Elamin, M., Li, B., & Tan, K. T. (2017). Effect of low temperature on impact behavior of composite sandwich structures. ICCM International Conferences on Composite Materials, 2017-August. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85053168143&partnerID=MN8TOARS

Reyhanoglu, M., & Rehan, M. (2017). Nonlinear Dynamics and Control of Aerial Robots. In Aerial Robots - Aerodynamics, Control and Applications. https://doi.org/10.5772/intechopen.69641

Rehan, M., Reyhanoglu, M., & McClamroch, H. (2017). Motion planning for a knife-edge on the surface of a hyperboloid. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287363

Hoffman, D., & Reyhanoglu, M. (2017). Geometric tracking control of a three-dimensional revolute joint robot. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287245

Reyhanoglu, M., & Hoffman, D. (2017). Finite-time control of a compliant base robot manipulator. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287365

Stebler, S., Campobasso, M., Kidambi, K., MacKunis, W., & Reyhanoglu, M. (2017). Dynamic neural network-based sliding mode estimation of quadrotor systems. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/ACC.2017.7963344

Ramos-Pedroza, N., MacKunis, W., & Reyhanoglu, M. (2017). Synthetic Jet Actuator-Based Aircraft Tracking Using a Continuous Robust Nonlinear Control Strategy. International Journal of Aerospace Engineering, 2017, 1–13. https://doi.org/10.1155/2017/4934281

McClamroch, H., Reyhanoglu, M., & Rehan, M. (2017). Knife-Edge Motion on a Surface as a Nonholonomic Control Problem. IEEE Control Systems Letters, 1(1), 26–31. https://doi.org/10.1109/lcsys.2017.2700441

Han, B., Ma, T., Vergara, J. H., Palmese, G. R., Yin, J., Lee, D., & Han, L. (2017). Non-additive impacts of covalent cross-linking on the viscoelastic nanomechanics of ionic polyelectrolyte complexes. RSC Advances, 7(84), 53334–53345. https://doi.org/10.1039/c7ra08514a

Lin, G., Chandrasekaran, P., Lv, C., Zhang, Q., Tang, Y., Han, L., & Yin, J. (2017). Self-similar Hierarchical Wrinkles as a Potential Multifunctional Smart Window with Simultaneously Tunable Transparency, Structural Color, and Droplet Transport. ACS Applied Materials & Interfaces, 9(31), 26510–26517. https://doi.org/10.1021/acsami.7b05056

Lin, G., Ge, D., Tang, Y., Xia, Y., Wu, G., Han, L., … Yin, J. (2017). Cuts Guided Deterministic Buckling in Arrays of Soft Parallel Plates for Multifunctionality. ACS Applied Materials & Interfaces, 9(34), 29345–29354. https://doi.org/10.1021/acsami.7b09466

Zhang, Q., Tang, Y., Hajfathalian, M., Chen, C., Turner, K. T., Dikin, D. A., … Yin, J. (2017). Spontaneous Periodic Delamination of Thin Films To Form Crack-Free Metal and Silicon Ribbons with High Stretchability. ACS Applied Materials & Interfaces, 9(51), 44938–44947. https://doi.org/10.1021/acsami.7b15693

Mosey, A., Gaire, B., Kim, J., Ryu, J. E., & Cheng, R. (2017). Tunable cobalt nanoparticle synthesis by intense pulse flash annealing. AIP Advances, 7(5), 056308. https://doi.org/10.1063/1.4975044

Cao, Y., Huang, J., Peng, X., Cao, D., Galaska, A., Qiu, S., … Guo, Z. (2017). Poly(vinylidene fluoride) derived fluorine-doped magnetic carbon nanoadsorbents for enhanced chromium removal. Carbon, 115, 503–514. https://doi.org/10.1016/j.carbon.2017.01.033

Chen, A., Wang, L., Li, B.-Y., Sherman, J., Ryu, J. E., Hamamura, K., … Yokota, H. (2017). Reduction in Migratory Phenotype in a Metastasized Breast Cancer Cell Line via Downregulation of S100A4 and GRM3. Scientific Reports, 7(1), 3459–3460. https://doi.org/10.1038/s41598-017-03811-9

Bafandeh, A., & Vermillion, C. (2017). Altitude Optimization of Airborne Wind Energy Systems via Switched Extremum Seeking—Design, Analysis, and Economic Assessment. IEEE Transactions on Control Systems Technology, 25(6), 2022–2033. https://doi.org/10.1109/tcst.2016.2632534

Baheri, A., Bin-Karim, S., Bafandeh, A., & Vermillion, C. (2017). Real-time control using Bayesian optimization: A case study in airborne wind energy systems. Control Engineering Practice, 69, 131–140. https://doi.org/10.1016/j.conengprac.2017.09.007

Kehs, M., Cobb, M., Fathy, H. K., & Vermillion, C. (2017). Insights from an experimental study on the crosswind flight of a lab-scale buoyant air turbine. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/acc.2017.7963809

Baheri, A., & Vermillion, C. (2017). Altitude optimization of Airborne Wind Energy systems: A Bayesian Optimization approach. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/acc.2017.7963143

Kalabić, U., Vermillion, C., & Kolmanovsky, I. (2017). Constraint Enforcement for a Lighter-than-Air Wind-Energy System: An Application of Reference Governors with Chance Constraints. IFAC-PapersOnLine, 50(1), 13258–13263. https://doi.org/10.1016/j.ifacol.2017.08.1962

Bafandeh, A., Bin-Karim, S., & Vermillion, C. (2017). Fused local-global control of spatiotemporally-varying systems: A case study in airborne wind energy. 2017 IEEE Conference on Control Technology and Applications (CCTA). Presented at the 2017 IEEE Conference on Control Technology and Applications (CCTA). https://doi.org/10.1109/ccta.2017.8062512

Cobb, M., Barton, K., Fathy, H., & Vermillion, C. (2017). Iterative learning-based waypoint optimization for repetitive path planning, with application to airborne wind energy systems. 2017 IEEE 56th Annual Conference on Decision and Control (CDC). Presented at the 2017 IEEE 56th Annual Conference on Decision and Control (CDC). https://doi.org/10.1109/cdc.2017.8264051

Srinivasan, S., Ekkad, S. V., & Tolpadi, A. (2017). Heat Transfer Measurements inside Narrow Channels with Ribs and Trenches. Heat Transfer Engineering, 39(9), 750–759. https://doi.org/10.1080/01457632.2017.1341198

Boulanger, A., Hutchinson, J., Ng, W. F., Ekkad, S. V., Keefe, M. J., Xu, W., … Hsu, K. (2017). Experimental investigation of the onset of sand deposits on Hastelloy-X between 1,000°C and 1,100°C. The Aeronautical Journal, 121(1242), 1187–1199. https://doi.org/10.1017/AER.2017.48

Ma, T., Lu, X., Pandit, J., Ekkad, S. V., Huxtable, S. T., Deshpande, S., & Wang, Q.-wang. (2017). Numerical study on thermoelectric–hydraulic performance of a thermoelectric power generator with a plate-fin heat exchanger with longitudinal vortex generators. Applied Energy, 185, 1343–1354. https://doi.org/10.1016/J.APENERGY.2016.01.078

Sun, K., Xie, P., Wang, Z., Su, T., Shao, Q., Ryu, J. E., … Guo, Z. (2017). Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity. Polymer, 125, 50–57. https://doi.org/10.1016/j.polymer.2017.07.083

Cheng, C., Fan, R., Wang, Z., Shao, Q., Guo, X., Xie, P., … Guo, Z. (2017). Tunable and weakly negative permittivity in carbon/silicon nitride composites with different carbonizing temperatures. Carbon, 125, 103–112. https://doi.org/10.1016/j.carbon.2017.09.037

Shankar, A., Salcedo, E., Berndt, A., Choi, D., & Ryu, J. E. (2017). Pulsed light sintering of silver nanoparticles for large deformation of printed stretchable electronics. Advanced Composites and Hybrid Materials, 1(1), 193–198. https://doi.org/10.1007/s42114-017-0012-3

Ji, Y., Singh, P., Ekkad, S. V., & Zang, S. (2017). Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition. Numerical Heat Transfer, Part A: Applications, 72(8), 579–599. https://doi.org/10.1080/10407782.2017.1394136

Ravi, B. V., Singh, P., & Ekkad, S. V. (2017). Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels. International Journal of Thermal Sciences, 112, 31–43. https://doi.org/10.1016/J.IJTHERMALSCI.2016.09.034

Damley-Strnad, A., Fittipaldi, M., Morales, B., & Grace, L. R. (2017). The effect of lipid absorption on the mechanical properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications. Presented at the PROCEEDINGS OF PPS-32: The 32nd International Conference of the Polymer Processing Society - Conference Papers. https://doi.org/10.1063/1.5016760

Edwin, L., Mazzoleni, A., Gemmer, T., & Ferguson, S. (2017). Modeling, construction and experimental validation of actuated rolling dynamics of the cylindrical Transforming Roving-Rolling Explorer (TRREx). Acta Astronautica, 132, 43–53. https://doi.org/10.1016/J.ACTAASTRO.2016.11.006

Pang, H., Lowrie, J., & Ngaile, G. (2017). Development of a Non-isothermal Forging Process for Hollow Axle Shafts. Procedia Engineering, 207, 454–459. https://doi.org/10.1016/J.PROENG.2017.10.804

Lowrie, J., & Ngaile, G. (2017). Analytical modeling of hydrodynamic lubrication in a multiple-reduction drawing die. Journal of Manufacturing Processes, 27, 291–303. https://doi.org/10.1016/J.JMAPRO.2017.05.003

Hubbard, A. M., Mailen, R. W., Zikry, M. A., Dickey, M. D., & Genzer, J. (2017). Controllable curvature from planar polymer sheets in response to light. Soft Matter, 13(12), 2299–2308. https://doi.org/10.1039/C7SM00088J

Kolanjiyil, A. V., Kleinstreuer, C., & Sadikot, R. T. (2017). Computationally efficient analysis of particle transport and deposition in a human whole-lung-airway model. Part II: Dry powder inhaler application. Computers in Biology and Medicine, 84, 247–253. https://doi.org/10.1016/J.COMPBIOMED.2016.10.025

Di, J., Yu, J., Wang, Q., Yao, S., Suo, D., Ye, Y., … Gu, Z. (2017). Ultrasound-triggered noninvasive regulation of blood glucose levels using microgels integrated with insulin nanocapsules. Nano Research, 10(4), 1393–1402. https://doi.org/10.1007/S12274-017-1500-Z

Marx, J., & Rabiei, A. (2017). Overview of Composite Metal Foams and Their Properties and Performance. Advanced Engineering Materials, 19(11), 1600776. https://doi.org/10.1002/adem.201600776

Jiang, F., Zhao, J., Kota, A. K., Xi, N., Mutka, M. W., & Xiao, L. (2017). A Miniature Water Surface Jumping Robot. IEEE Robotics and Automation Letters, 2(3), 1272–1279. https://doi.org/10.1109/lra.2017.2662738

Wang, W., Salazar, J., Vahabi, H., Joshi-Imre, A., Voit, W. E., & Kota, A. K. (2017). Metamorphic Superomniphobic Surfaces. Advanced Materials, 29(27), 1700295. https://doi.org/10.1002/adma.201700295

Vahabi, H., Wang, W., Popat, K. C., Kwon, G., Holland, T. B., & Kota, A. K. (2017). Metallic superhydrophobic surfaces via thermal sensitization. Applied Physics Letters, 110(25), 251602. https://doi.org/10.1063/1.4989577

Bartlet, K., Movafaghi, S., Kota, A., & Popat, K. C. (2017). Superhemophobic titania nanotube array surfaces for blood contacting medical devices. RSC Advances, 7(56), 35466–35476. https://doi.org/10.1039/c7ra03373g

Pendurthi, A., Movafaghi, S., Wang, W., Shadman, S., Yalin, A. P., & Kota, A. K. (2017). Fabrication of Nanostructured Omniphobic and Superomniphobic Surfaces with Inexpensive CO2 Laser Engraver. ACS Applied Materials & Interfaces, 9(31), 25656–25661. https://doi.org/10.1021/acsami.7b06924

Vahabi, H., Wang, W., Davies, S., Mabry, J. M., & Kota, A. K. (2017). Coalescence-Induced Self-Propulsion of Droplets on Superomniphobic Surfaces. ACS Applied Materials & Interfaces, 9(34), 29328–29336. https://doi.org/10.1021/acsami.7b09344

Wu, X., Pankow, M., Shadow Huang, H.-Y., & Peters, K. (2017). High-speed polarized light microscopy for in situ, dynamic measurement of birefringence properties. Measurement Science and Technology, 29(1), 015203. https://doi.org/10.1088/1361-6501/aa9084

Myers, A. C., & Jur, J. S. (2017). Effects of thermal energy harvesting on the human - Clothing - environment microsystem. IOP Conference Series: Materials Science and Engineering, 254(7). https://doi.org/10.1088/1757-899X/254/7/072015

Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). A Wearable Hydration Sensor with Conformal Nanowire Electrodes. Advanced Healthcare Materials, 6(6), 1601159. https://doi.org/10.1002/ADHM.201601159

Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na<inf>2</inf>SO<inf>4</inf> + V<inf>2</inf>O<inf>5</inf>). Corrosion Science, 115, 56–67. https://doi.org/10.1016/j.corsci.2016.11.011

Qiao, Y., Liu, J., Jia, Y., Xu, C., An, L., & Bai, Y. (2017). Study on coexistence of brittle and ductile fractures in nano reinforcement composites under different loading conditions. International Journal of Fracture, 204(2), 205–224. https://doi.org/10.1007/s10704-016-0174-y

Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of chip morphology and chip formation mechanism during machining of magnesium-based metal matrix composites. ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 2. https://doi.org/10.1115/MSEC2017-3052

Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of Chip Morphology and Chip Formation Mechanism during Machining of Magnesium-Based Metal Matrix Composites. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(9). https://doi.org/10.1115/1.4037182

Shin, Y. C., & Xu, C. (2017). Intelligent systems: Modeling, optimization, and control. In Intelligent Systems: Modeling, Optimization, and Control (pp. 1–433). https://doi.org/10.1201/9781420051773

Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). Enhanced cyclic oxidation resistance through the self-healing of segmented cracks using nano-Al<inf>2</inf>O<inf>3</inf>/Ni-20 wt%Al particles in laser re-melted thermal barrier coatings. Materials Letters, 201, 156–160. https://doi.org/10.1016/j.matlet.2017.04.116

Xu, C., & Daniel, J. (2017). Wireless Temperature Measurement Based on Radio Frequency (RF) Technology. Presented at the 40th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL.

Xu, C., Ajayi, T., & Morales, J. (2017). Thermal and Oxidation Stability of BNNT and BNNT Composites. Presented at the NASA Langley.

Daniel, J., Ju, L., Yang, J., Sun, X., Gupta, N., Schrand, A., & Xu, C. (2017). Pearl-Chain Formation of Discontinuous Carbon Fiber Under Electrical Field. Journal of Manufacturing and Materials Processing, 1(2), 22. https://doi.org/10.3390/jmmp1020022

Xu, C., & Peebles, J. (2017). Non-Destructive Testing of Composite Materials at High Temperature (2000oC). Presented at the Material Measurements Working Group, Dayton, OH.

Macdonald, J., & Xu, C. (2017). Metamaterial Enabling RF Transparency – Ceramic Composite Design for High Temperature Application. Presented at the National Space and Missile Materials Symposium, CA.

Xu, C., & Wang, K. (2017). Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics. Pittsburgh, PA: Materials Science & Technology.

Chang, W. Y., Zhang, X. A., Kim, J., Huang, W. B., Chang, C. H., & Jiang, X. N. (2017). Photoacoustic transduction efficiency evaluation of candle soot nanoparticles/PDMS composites. 2017 ieee 17th international conference on nanotechnology (ieee-nano), 439–442. https://doi.org/10.1109/nano.2017.8117338

Jiang, X., Li, S., Kim, J., & Ma, J. (2017). High frequency piezo-composite micromachined ultrasound transducer array technology for biomedical imaging. https://doi.org/10.1115/1.860441

Jasper, W. J., & Rasipuram, S. C. (2017). Plasma textiles as fibrous filter media. FIBROUS FILTER MEDIA, pp. 191–210. https://doi.org/10.1016/b978-0-08-100573-6.00011-3

Liu, Y., Rollins, C., Dinh, N., & Luo, H. (2017). Sensitivity analysis of interfacial momentum closure terms in two phase flow and boiling simulations using MCFD solver. Proceedings of the ASME Summer Heat Transfer Conference, 2017, vol 2. https://doi.org/10.1115/ht2017-4963

Zilberter, I. A., Edwards, J. R., & Wittich, D. J., III. (2017). Numerical Simulation of Aero-Optical Effects in a Supersonic Cavity Flow. AIAA JOURNAL, 55(9), 3095–3108. https://doi.org/10.2514/1.j055402

Pritchard, E., Mackey, L., Zhu, D., Gregory, D., & Norris, G. (2017). Modular electric generator rapid deployment DC microgrid. 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 106–110. https://doi.org/10.1109/icdcm.2017.8001030

White, S., & Ferguson, S. (2017). Exploring architecture selection and system evolvability. Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 2b. https://doi.org/10.1115/detc2017-68290

Long, D., & Ferguson, S. (2017). A case study of evolvability and excess on the B-52 stratofortress and FA-18 hornet. Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 4. https://doi.org/10.1115/detc2017-68287

Wu, J., Zheng, X., Hu, J., Zhang, Y., & Yuan, F.-G. (2017). Study on Random Decrement Signature Under Different Triggering Level and Length of Time History. TOPICS IN MODAL ANALYSIS & TESTING, VOL 10, pp. 159–166. https://doi.org/10.1007/978-3-319-54810-4_17

Santago, A. C., II, Vidt, M. E., Li, X., Tuohy, C. J., Poehling, G. G., Freehill, M. T., & Saul, K. R. (2017). Shoulder Strength Requirements for Upper Limb Functional Tasks: Do Age and Rotator Cuff Tear Status Matter? JOURNAL OF APPLIED BIOMECHANICS, 33(6), 446–452. https://doi.org/10.1123/jab.2016-0116

Gamzina, D., Luhmann, N. C., Ledford, C., Horn, T., Karakaut, I., Lin, L., & Frigola, P. (2017). Additive vacuum electronics electron beam melting of copper. 2017 eighteenth international vacuum electronics conference (ivec). https://doi.org/10.1109/ivec.2017.8289495

Kuznetsov, I. A., & Kuznetsov, A. V. (2017). How dense core vesicles are delivered to axon terminals - a review of modeling approaches. Modeling of Microscale Transport in Biological Processes, 335–352.

Yuan, C. Z., Wu, F., & Duan, C. (2017). Cooperative output regulation of multi-agent systems with switched leader dynamics via smooth switching. Proceedings of the ASME 10th Annual Dynamic Systems and Control Conference, 2017, vol 2. https://doi.org/10.1115/dscc2017-5055

Hollar, S., Brain, M., Nayak, A. A., Stevens, A., Patil, N., Mittal, H., & Smith, W. J. (2017). A New low cost, efficient, self-driving personal rapid transit system. 2017 28th ieee intelligent vehicles symposium (iv 2017), 412–417. https://doi.org/10.1109/ivs.2017.7995753

Guo, Y., Li, Y., Awartani, O., Han, H., Zhang, G., Ade, H., … Zhao, D. (2017). Side-chain engineering of perylenediimide-vinylene polymer acceptors for high-performance all-polymer solar cells. MATERIALS CHEMISTRY FRONTIERS, 1(7), 1362–1368. https://doi.org/10.1039/c6qm00355a

Moshonas, N., Stathopoulos, N. A., O'Connor, B. T., Bedeloglu, A. C., Savaidis, S. P., & Vasiliadis, S. (2017). Optical modeling of fiber organic photovoltaic structures using a transmission line method. APPLIED OPTICS, 56(34), 9351–9358. https://doi.org/10.1364/ao.56.009351

She, G.-L., Yuan, F.-G., Ren, Y.-R., & Xiao, W.-S. (2017). On buckling and postbuckling behavior of nanotubes. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 121, 130–142. https://doi.org/10.1016/j.ijengsci.2017.09.005

Yang, R., Sen, P., O'Connor, B. T., & Kudenov, M. W. (2017). Intrinsic coincident full-Stokes polarimeter using stacked organic photovoltaics and architectural comparison of polarimeter techniques. POLARIZATION SCIENCE AND REMOTE SENSING VIII, Vol. 10407. https://doi.org/10.1117/12.2273885

McElroy, M. W., Gutkin, R., & Pankow, M. (2017). Interaction of delaminations and matrix cracks in a CFRP plate, Part II: Simulation using an enriched shell finite element model. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 252–262. https://doi.org/10.1016/j.compositesa.2017.10.006

McElroy, M., Jackson, W., Olsson, R., Hellstrom, P., Tsampas, S., & Pankow, M. (2017). Interaction of delaminations and matrix cracks in a CFRP plate, Part I: A test method for model validation. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 314–326. https://doi.org/10.1016/j.compositesa.2017.09.011

Schoenfeld-Tacher, R. M., Horn, T. J., Scheviak, T. A., Royal, K. D., & Hudson, L. C. (2017). Evaluation of 3D Additively Manufactured Canine Brain Models for Teaching Veterinary Neuroanatomy. JOURNAL OF VETERINARY MEDICAL EDUCATION, 44(4), 612–619. https://doi.org/10.3138/jvme.0416-080r

Cheng, G., Yin, S., Chang, T.-H., Richter, G., Gao, H., & Zhu, Y. (2017). Anomalous Tensile Detwinning in Twinned Nanowires. PHYSICAL REVIEW LETTERS, 19(25). https://doi.org/10.1103/physrevlett.119.256101

Misenheimer, C. T., & Terry, S. D. (2017). The development of a dynamic single effect, lithium bromide absorption chiller model with enhanced generator fidelity. ENERGY CONVERSION AND MANAGEMENT, 150, 574–587. https://doi.org/10.1016/j.enconman.2017.08.005

Balar, N., Xiong, Y., Ye, L., Li, S., Nevola, D., Dougherty, D. B., … Brendan T. O'Connor. (2017). Role of Polymer Segregation on the Mechanical Behavior of All Polymer Solar Cell Active Layers. ACS APPLIED MATERIALS & INTERFACES, 9(50), 43886–43892. https://doi.org/10.1021/acsami.7b13719

Deng, Y., Ge, H., Tian, Y., Lu, M., & Jing, Y. (2017). Observation of zone folding induced acoustic topological insulators and the role of spin-mixing defects. PHYSICAL REVIEW B, 96(18). https://doi.org/10.1103/physrevb.96.184305

Huang, T.-Y., & Jing, Y. (2017). Investigation of the effective density of arbitrarily shaped plate-type acoustic metamaterials without mass attached. WAVE MOTION, 74, 124–133. https://doi.org/10.1016/j.wavemoti.2017.07.003

Cruz-Teran, C. A., Tiruthani, K., Mischler, A., & Rao, B. M. (2017). Inefficient Ribosomal Skipping Enables Simultaneous Secretion and Display of Proteins in Saccharomyces cerevisiae. ACS SYNTHETIC BIOLOGY, 6(11), 2096–2107. https://doi.org/10.1021/acssynbio.7b00144

Van Hoe, B., Oman, K. G., Van Steenberge, G., Stan, N., Schultz, S. M., & Peters, K. J. (2017). High-Speed Interrogation of Multiplexed Fiber Bragg Gratings With Spectral Distortion. IEEE SENSORS JOURNAL, 17(21), 6941–6947. https://doi.org/10.1109/jsen.2017.2750327

Sharma, M., Deshmukh, P., Kasanaboina, P., Reynolds, C. L., Jr., Liu, Y., & Iyer, S. (2017). Growth of defect-free GaAsSbN axial nanowires via self-catalyzed molecular beam epitaxy. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 32(12). https://doi.org/10.1088/1361-6641/aa90b0

Stevens, P. R. R. J., Babinsky, H., Manar, F., Mancini, P., Jones, A. R., Nakata, T., … Ol, M. V. (2017, October). Experiments and Computations on the Lift of Accelerating Flat Plates at Incidence. AIAA JOURNAL, Vol. 55, pp. 3255–3265. https://doi.org/10.2514/1.j055323

Zhang, X. A., Chen, Y.-A., Bagal, A., & Chang, C.-H. (2017). Enhanced total internal reflection using low-index nanolattice materials. OPTICS LETTERS, 42(20), 4123–4126. https://doi.org/10.1364/ol.42.004123

Jiang, H., Ren, Y., Gao, B., Xiang, J., & Yuan, F.-G. (2017). Design of novel plug-type triggers for composite square tubes: enhancement of energy-absorption capacity and inducing failure mechanisms. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 131, 113–136. https://doi.org/10.1016/j.ijmecsci.2017.06.050

Waghela, R., & Bryant, M. (2017). Control design for high-fidelity cyber-physical systems with applications to experimental fluid-structure interaction studies. Proceedings of the asme conference on smart materials adaptive. https://doi.org/10.1115/smasis2017-3740

Kaul, N., & Huang, H.-Y. S. (2017). Constitutive modeling of jugular vein-derived venous valve leaflet tissues. Journal of the Mechanical Behavior of Biomedical Materials, 75, 50–57. https://doi.org/10.1016/j.jmbbm.2017.06.037

Harb, M. S., & Yuan, F. G. (2017). Barely visible impact damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(6), 663–673. https://doi.org/10.1177/1475921716678921

Yuan, C., & Wu, F. (2017). Almost output regulation of switched linear dynamics with switched exosignals. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 27(16), 3197–3217. https://doi.org/10.1002/rnc.3735

Lowrie, J., Pang, H., & Ngaile, G. (2017). Weight reduction of heavy-duty truck components through hollow geometry and intensive quenching. JOURNAL OF MANUFACTURING PROCESSES, 28, 523–530. https://doi.org/10.1016/j.jmapro.2017.04.021

Owoyele, O., & Echekki, T. (2017). Toward computationally efficient combustion DNS with complex fuels via principal component transport. COMBUSTION THEORY AND MODELLING, 21(4), 770–798. https://doi.org/10.1080/13647830.2017.1296976

Wcisel, D. J., Ota, T., Litman, G. W., & Yoder, J. A. (2017). Spotted Gar and the Evolution of Innate Immune Receptors. JOURNAL OF EXPERIMENTAL ZOOLOGY PART B-MOLECULAR AND DEVELOPMENTAL EVOLUTION, 328(7), 666–684. https://doi.org/10.1002/jez.b.22738

Subbareddy, P. K., Kartha, A., & Candler, G. V. (2017). Scalar conservation and boundedness in simulations of compressible flow. JOURNAL OF COMPUTATIONAL PHYSICS, 348, 827–846. https://doi.org/10.1016/j.jcp.2017.08.001

Flores, M., Mollenhauer, D., Runatunga, V., Beberniss, T., Rapking, D., & Pankow, M. (2017). High-speed 3D digital image correlation of low-velocity impacts on composite plates. COMPOSITES PART B-ENGINEERING, 131, 153–164. https://doi.org/10.1016/j.compositesb.2017.07.078

Watkins, M. F., & Gould, R. D. (2017). Heat transfer to vertical dense granular flows at high operating temperatures. Proceedings of the asme 11th international conference on energy sustainability, 2017. https://doi.org/10.1115/es2017-3272

Liu, Y., Wu, F., & Ban, X. (2017). Dynamic Output Feedback Control for Continuous-Time T-S Fuzzy Systems Using Fuzzy Lyapunov Functions. IEEE TRANSACTIONS ON FUZZY SYSTEMS, 25(5), 1155–1167. https://doi.org/10.1109/tfuzz.2016.2598852

Allen, J. D., Mattson, C. A., Thacker, K. S., & Ferguson, S. M. (2017). Design for excess capability to handle uncertain product requirements in a developing world setting. RESEARCH IN ENGINEERING DESIGN, 28(4), 511–527. https://doi.org/10.1007/s00163-017-0253-8

Kim, H. W., & Yuan, F. G. (2017). Damage Imaging of an Isotropic Plate Using Matching Pursuit Algorithm. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2017, Vol. 10168. https://doi.org/10.1117/12.2258691

Balar, N., & Brendan T. O'Connor. (2017). Correlating Crack Onset Strain and Cohesive Fracture Energy in Polymer Semiconductor Films. MACROMOLECULES, 50(21), 8611–8618. https://doi.org/10.1021/acs.macromol.7b01282

Zelenak, D., & Narayanaswamy, V. (2017). Composition-independent mean temperature measurements in laminar diffusion flames using spectral lineshape information. EXPERIMENTS IN FLUIDS, 58(10). https://doi.org/10.1007/s00348-017-2430-y

Chandrasekaran, S., Pankow, M., Peters, K., & Huang, H.-Y. S. (2017). Composition and structure of porcine digital flexor tendon-bone insertion tissues. Journal of Biomedical Materials Research Part A, 105(11), 3050–3058. https://doi.org/10.1002/jbm.a.36162

Patil, V. C., & Ro, P. I. (2017). Comparative assessment of different types of ocean compressed air energy storage systems based on exergy analysis. Proceedings of the ASME Power Conference Joint with ICOPE-17, 2017, vol 2. https://doi.org/10.1115/power-icope2017-3630

Chilamkurti, Y. N., & Gould, R. D. (2017). Characterizing particle-wall contact behavior and fluctuations in gravity-driven dense granular flows in cylindrical tubes using dem. Proceedings of the ASME Power Conference Joint with ICOPE-17, 2017, vol 2.

Guo, G., Hackney, D., Pankow, M., & Peters, K. (2017). A spectral profile multiplexed FBG sensor network with application to strain measurement in a Kevlar woven fabric. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2017, Vol. 10168. https://doi.org/10.1117/12.2260114

Wee, J., Hackney, D. A., Bradford, P. D., & Peters, K. (2017). The adhesive effect on ultrasonic Lamb wave detection sensitivity of remotely-bonded fiber Bragg grating sensors. Sensors and smart structures technologies for civil, mechanical, and aerospace systems 2017, 10168. https://doi.org/10.1117/12.2260009

Hoffman, B. C., Mcafee, T., Pazoki, S., Apperson, A., Brendan T. O'Connor, & Dougherty, D. B. (2017). Temperature controlled interlayer disorder in ultrathin films of alpha-sexithiophene. THIN SOLID FILMS, 642, 182–187. https://doi.org/10.1016/j.tsf.2017.09.011

Cui, J., Adams, J. G. M., & Zhu, Y. (2017). Pop-up assembly of 3D structures actuated by heat shrinkable polymers. SMART MATERIALS AND STRUCTURES, 26(12). https://doi.org/10.1088/1361-665x/aa9552

Ke, J., & Edwards, J. R. (2017). Numerical Simulations of Turbulent Flow over Airfoils Near and During Static Stall. JOURNAL OF AIRCRAFT, 54(5), 1960–1978. https://doi.org/10.2514/1.c034186

Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Mechanisms of signal coupling to optical fiber for FBG sensor detection of Lamb waves. 2017 25TH INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS (OFS), Vol. 10323. https://doi.org/10.1117/12.2263278

Bokhart, M. T., Manni, J., Garrard, K. P., Ekelof, M., Nazari, M., & Muddiman, D. C. (2017). IR-MALDESI Mass Spectrometry Imaging at 50 Micron Spatial Resolution. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 28(10), 2099–2107. https://doi.org/10.1007/s13361-017-1740-x

Wells, B., Kumar, R., Reynolds, C. L., Jr., Peters, K., & Bradford, P. D. (2017). Highly anisotropic magneto-transport and field orientation dependent oscillations in aligned carbon nanotube/epoxy composites. APPLIED PHYSICS LETTERS, 111(26). https://doi.org/10.1063/1.4999503

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. (2017). Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets. JOURNAL OF APPLIED PHYSICS, 122(19). https://doi.org/10.1063/1.5000040

Jing, W., Wu, Z., Roberts, W. L., & Fang, T. (2017). Effects of Fuel Quantity on Soot Formation Process for Biomass-Based Renewable Diesel Fuel Combustion. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 139(10). https://doi.org/10.1115/1.4036292

Yuan, C., & Wu, F. (2017). Consensus for multi-agent systems with time-varying input delays. INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 48(14), 2956–2966. https://doi.org/10.1080/00207721.2017.1363927

Kolanjiyil, A. V., & Kleinstreuer, C. (2017). Computational analysis of aerosol-dynamics in a human whole-lung airway model. JOURNAL OF AEROSOL SCIENCE, 114, 301–316. https://doi.org/10.1016/j.jaerosci.2017.10.001

Huang, H.-Y. S., & Lu, J. (2017). Biaxial mechanical properties of bovine jugular venous valve leaflet tissues. Biomechanics and Modeling in Mechanobiology, 16(6), 1911–1923. https://doi.org/10.1007/s10237-017-0927-1

Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Using Resampling Residuals for Estimating Confidence Intervals of the Effective Viscosity and Forchheimer Coefficient. TRANSPORT IN POROUS MEDIA, 119(2), 451–459. https://doi.org/10.1007/s11242-017-0892-2

Gemmer, T., Yoder, C. D., Reedy, J., & Mazzoleni, A. P. (2017, September). Tether enabled spacecraft systems for ultra long wavelength radio astronomy. ACTA ASTRONAUTICA, Vol. 138, pp. 530–535. https://doi.org/10.1016/j.actaastro.2016.11.009

Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Simulating tubulin-associated unit transport in an axon: using bootstrapping for estimating confidence intervals of best-fit parameter values obtained from indirect experimental data. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 473(2201). https://doi.org/10.1098/rspa.2017.0045

Banks, H. T., Bekele-Maxwell, K., Bociu, L., Noorman, M., & Guidoboni, G. (2017). SENSITIVITY ANALYSIS IN PORO-ELASTIC AND PORO-VISCO-ELASTIC MODELS WITH RESPECT TO BOUNDARY DATA. QUARTERLY OF APPLIED MATHEMATICS, 75(4), 697–735. https://doi.org/10.1090/qam/1475

Kim, T., Saini, A., Kim, J., Gopalarathnam, A., Zhu, Y., Palmieri, F. L., … Jiang, X. (2017). Piezoelectric Floating Element Shear Stress Sensor for the Wind Tunnel Flow Measurement. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 64(9), 7304–7312. https://doi.org/10.1109/tie.2016.2630670

Tippens, J., Bagal, A., Zhang, X. A., & Chang, C.-H. (2017). Nanostructured antireflective in-plane solar harvester. OPTICS EXPRESS, 25(16), A840–A850. https://doi.org/10.1364/oe.25.00a840

Kingsbury, R. S., Liu, F., Zhu, S., Boggs, C., Armstrong, M. D., Call, D. F., & Coronell, O. (2017). Impact of natural organic matter and inorganic solutes on energy recovery from five real salinity gradients using reverse electrodialysis. JOURNAL OF MEMBRANE SCIENCE, 541, 621–632. https://doi.org/10.1016/j.memsci.2017.07.038

Kim, J., Lindsey, B. D., Li, S., Dayton, P. A., & Jiang, X. (2017). Dual-Frequency Transducer with a Wideband PVDF Receiver for Contrast-Enhanced, Adjustable Harmonic Imaging. HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2017, Vol. 10170. https://doi.org/10.1117/12.2258571

Jiang, Z. H., Cui, Z., Yue, T., Zhu, Y., & Werner, D. H. (2017). Compact, Highly Efficient, and Fully Flexible Circularly Polarized Antenna Enabled by Silver Nanowires for Wireless Body-Area Networks. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, 11(4), 920–932. https://doi.org/10.1109/tbcas.2017.2671841

Li, Y., Shen, C., Xie, Y., Li, J., Wang, W., Cummer, S. A., & Jing, Y. (2017). Tunable Asymmetric Transmission via Lossy Acoustic Metasurfaces. PHYSICAL REVIEW LETTERS, 119(3). https://doi.org/10.1103/physrevlett.119.035501

Nagai, H., Poteet, A., Zhang, X. A., & Chang, C.-H. (2017). Three-dimensional colloidal interference lithography. Nanotechnology, 28(12), 125302. https://doi.org/10.1088/1361-6528/aa5e3f

Chen, S., Yao, H., Li, Z., Awartani, O. M., Liu, Y., Wang, Z., … Yan, H. (2017). Surprising Effects upon Inserting Benzene Units into a Quaterthiophene-Based D-A Polymer-Improving Non-Fullerene Organic Solar Cells via Donor Polymer Design. ADVANCED ENERGY MATERIALS, 7(12). https://doi.org/10.1002/aenm.201602304

Bagal, A., Zhang, X. A., Shahrin, R., Dandley, E. C., Zhao, J., Poblete, F. R., … Chang, C.-H. (2017). Large-Area Nanolattice Film with Enhanced Modulus, Hardness, and Energy Dissipation. Scientific Reports, 7(1). https://doi.org/10.1038/S41598-017-09521-6

MacLeod, M., & Bryant, M. (2017). Dynamic Modeling, Analysis, and Testing of a Variable Buoyancy System for Unmanned Multidomain Vehicles. IEEE JOURNAL OF OCEANIC ENGINEERING, 42(3), 511–521. https://doi.org/10.1109/joe.2016.2586802

Lindsey, B. D., Kim, J., Dayton, P. A., & Jiang, X. (2017). Dual-Frequency Piezoelectric Endoscopic Transducer for Imaging Vascular Invasion in Pancreatic Cancer. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 64(7), 1078–1086. https://doi.org/10.1109/tuffc.2017.2702010

Foss, J., Peters, K., & Yang, W. (2017, July). Announcing the 2016 Measurement Science and Technology Outstanding Paper Awards. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 28. https://doi.org/10.1088/1361-6501/aa726e

Nejadkhaki, H. K., Lall, A., & Hall, J. F. (2017). A Methodology to Synthesize Gearbox and Control Design for Increased Power Production and Blade Root Stress Mitigation in a Small Wind Turbine. JOURNAL OF MECHANICAL DESIGN, 139(8). https://doi.org/10.1115/1.4036998

Kim, T., Kim, J., & Jiang, X. (2017). Transit Time Difference Flowmeter for Intravenous Flow Rate Measurement Using 1-3 Piezoelectric Composite Transducers. IEEE SENSORS JOURNAL, 17(17), 5741–5748. https://doi.org/10.1109/jsen.2017.2727340

Kim, J.-H., Gadisa, A., Schaefer, C., Yao, H., Gautam, B. R., Balar, N., … Ade, H. (2017). Strong polymer molecular weight-dependent material interactions: impact on the formation of the polymer/fullerene bulk heterojunction morphology. JOURNAL OF MATERIALS CHEMISTRY A, 5(25), 13176–13188. https://doi.org/10.1039/c7ta03052e

Chen, M., Steer, M. B., & Zikry, M. (2017). Significance of randomness in establishing hotspots in crystals. Southeastcon 2017. https://doi.org/10.1109/secon.2017.7925394

Ye, L., Xiong, Y., Li, S., Ghasemi, M., Balar, N., Turner, J., … Ade, H. (2017). Precise Manipulation of Multilength Scale Morphology and Its Influence on Eco-Friendly Printed All-Polymer Solar Cells. ADVANCED FUNCTIONAL MATERIALS, 27(33). https://doi.org/10.1002/adfm.201702016

He, J., & Yuan, F.-G. (2017). Lamb Wave-based BVID Imaging for a Curved Composite Sandwich Panel. 43RD REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, Vol. 1806. https://doi.org/10.1063/1.4974606

Kim, J., Lindsey, B. D., Chang, W.-Y., Dai, X., Stavas, J. M., Dayton, P. A., & Jiang, X. (2017). Intravascular forward-looking ultrasound transducers for microbubble-mediated sonothrombolysis. SCIENTIFIC REPORTS, 7. https://doi.org/10.1038/s41598-017-03492-4

Govind, B. (2017). Increasing the operational capability of a horizontal axis wind turbine by its integration with a vertical axis wind turbine. APPLIED ENERGY, 199, 479–494. https://doi.org/10.1016/j.apenergy.2017.04.070

Kim, T., Kim, J., & Jiang, X. (2017). High temperature transducer using aluminum nitride single crystal for laser ultrasound detection. NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017, Vol. 10169. https://doi.org/10.1117/12.2259975

Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Bi-directional ultrasonic wave coupling to FBGs in continuously bonded optical fiber sensing. APPLIED OPTICS, 56(25), 7262–7268. https://doi.org/10.1364/ao.56.007262

Bhaskaran, H. S., Ro, P., Park, J.-K., & Ramakrishnan, K. R. (2017). Analysis of a Novel Technique for Temperature Rise Abatement in Liquid Piston Compressors-External Gas Injection. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 9(2). https://doi.org/10.1115/1.4035969

Akinwande, D., Brennan, C. J., Bunch, J. S., Egberts, P., Felts, J. R., Gao, H., … Zhu, Y. (2017). [Review of A review on mechanics and mechanical properties of 2D materials-Graphene and beyond]. EXTREME MECHANICS LETTERS, 13, 42–77. https://doi.org/10.1016/j.eml.2017.01.008

Liu, B., Lu, T., Wang, B., Liu, J., Nakayama, T., Zhou, J., & Li, B. (2017). Thermoelectric transport in hybrid materials incorporating metallic nanowires in polymer matrix. APPLIED PHYSICS LETTERS, 110(11). https://doi.org/10.1063/1.4978602

She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory. APPLIED MATHEMATICAL MODELLING, 47, 340–357. https://doi.org/10.1016/j.apm.2017.03.014

Durham, J. W., III, Allen, M. J., & Rabiei, A. (2017). Preparation, characterization and in vitro response of bioactive coatings on polyether ether ketone. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 105(3), 560–567. https://doi.org/10.1002/jbm.b.33578

Du, H., Mohanty, K., & Mullera, M. (2017). Microstructural characterization of trabecular bone using ultrasonic backscattering and diffusion parameters. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 141(5), EL445–EL451. https://doi.org/10.1121/1.4982824

Bond, D. M., & Zikry, M. A. (2017). Microstructural Modeling of Intergranular Fracture in Tricrystals With Random Low- and High-Angle Grain Boundaries. JOM, 69(5), 856–862. https://doi.org/10.1007/s11837-017-2291-0

He, J., & Yuan, F.-G. (2017). Lamb-wave-based two-dimensional areal scan damage imaging using reverse-time migration with a normalized zero-lag cross-correlation imaging condition. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(4), 444–457. https://doi.org/10.1177/1475921716674373

Guo, G., Hackney, D., Pankow, M., & Peters, K. (2017). Interrogation of a spectral profile division multiplexed FBG sensor network using a modified particle swarm optimization method. MEASUREMENT SCIENCE AND TECHNOLOGY, 28(5). https://doi.org/10.1088/1361-6501/aa637f

Guo, Y., Li, Y., Awartani, O., Han, H., Zhao, J., Ade, H., … Zhao, D. (2017). Improved Performance of All-Polymer Solar Cells Enabled by Naphthodiperylenetetraimide-Based Polymer Acceptor. ADVANCED MATERIALS, 29(26). https://doi.org/10.1002/adma.201700309

Ye, L., Zhao, W., Li, S., Mukherjee, S., Carpenter, J. H., Awartani, O., … Ade, H. (2017). High-Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi-Length Scale Morphology and Device Performance. ADVANCED ENERGY MATERIALS, 7(7). https://doi.org/10.1002/aenm.201602000

Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. A. (2017). A fully coupled thermo-viscoelastic finite element model for self-folding shape memory polymer sheets. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 55(16), 1207–1219. https://doi.org/10.1002/polb.24372

Zhu, Y., Fan, X., Liang, B., Cheng, J., & Jing, Y. (2017). Ultrathin Acoustic Metasurface-Based Schroeder Diffuser. PHYSICAL REVIEW X, 7(2). https://doi.org/10.1103/physrevx.7.021034

Oduola, W. O., Li, X., Duan, C., Qian, L., Wu, F., & Dougherty, E. R. (2017). Time-Based Switching Control of Genetic Regulatory Networks: Toward Sequential Drug Intake for Cancer Therapy. CANCER INFORMATICS, 16. https://doi.org/10.1177/1176935117706888

Allred, C. J., Churchill, D., & Buckner, G. D. (2017). Real-time estimation of helicopter rotor blade kinematics through measurement of rotation induced acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 91, 183–197. https://doi.org/10.1016/j.ymssp.2017.01.003

Sang, S., Yuan, Z., Zheng, L., Sun, E., Qi, X., Zhang, R., … Du, J. (2017). Raman spectra of (K, Na)(Nb,Ta)O-3 single crystal. JOURNAL OF ALLOYS AND COMPOUNDS, 704, 804–808. https://doi.org/10.1016/j.jallcom.2016.12.166

Choi, S., & Saveliev, A. V. (2017). Oscillatory coalescence of droplets in an alternating electric field. PHYSICAL REVIEW FLUIDS, 2(6). https://doi.org/10.1103/physrevfluids.2.063603

Crouch, D. L., & Huang, H. (2017). Musculoskeletal model-based control interface mimics physiologic hand dynamics during path tracing task. JOURNAL OF NEURAL ENGINEERING, 14(3). https://doi.org/10.1088/1741-2552/aa61bc

Hudson, T. B., Hou, T.-H., Grimsley, B. W., & Yuan, F.-G. (2017). Imaging of local porosity/voids using a fully non-contact air-coupled transducer and laser Doppler vibrometer system. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(2), 164–173. https://doi.org/10.1177/1475921716668843

Huang, S. J., Kim, T., Hou, D., Cann, D., Jones, J. L., & Jiang, X. N. (2017). Flexoelectric characterization of BaTiO3-0.08Bi(Zn1/2Ti1/2)O-3. Applied Physics Letters, 110(22).

Yu, H., Chung, C.-C., Shewmon, N., Ho, S., Carpenter, J. H., Larrabee, R., … So, F. (2017). Flexible Inorganic Ferroelectric Thin Films for Nonvolatile Memory Devices. Advanced Functional Materials, 27(21), 1700461. https://doi.org/10.1002/ADFM.201700461

Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9

Bond, D. M., & Zikry, M. A. (2017). A Predictive Framework for Dislocation-Density Pile-Ups in Crystalline Systems With Coincident Site Lattice and Random Grain Boundaries. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(2). https://doi.org/10.1115/1.4035494

Echekki, T., & Ahmed, S. F. (2017). Turbulence effects on the autoignition of DME in a turbulent co-flowing jet. COMBUSTION AND FLAME, 178, 70–81. https://doi.org/10.1016/j.combustflame.2016.12.022

Forster, J. D., Lynch, J. J., Coates, N. E., Liu, J., Jang, H., Zaia, E., … Urban, J. J. (2017). Solution-Processed Cu2Se Nanocrystal Films with Bulk-Like Thermoelectric Performance. SCIENTIFIC REPORTS, 7. https://doi.org/10.1038/s41598-017-02944-1

Wee, J., Hackney, D. A., Bradford, P. D., & Peters, K. J. (2017). Simulating increased Lamb wave detection sensitivity of surface bonded fiber Bragg grating. SMART MATERIALS AND STRUCTURES, 26(4). https://doi.org/10.1088/1361-665x/aa646b

Leser, P. E., Hochhalter, J. D., Warner, J. E., Newman, J. A., Leser, W. P., Wawrzynek, P. A., & Yuan, F.-G. (2017). Probabilistic fatigue damage prognosis using surrogate models trained via three-dimensional finite element analysis. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(3), 291–308. https://doi.org/10.1177/1475921716643298

Soltmann, L. M., & Hall, C. E., Jr. (2017). Power-Required Flight Testing of Unmanned Aerial Systems Using Non-Steady-State Flight. JOURNAL OF AIRCRAFT, 54(3), 1162–1171. https://doi.org/10.2514/1.c033982

Srivastava, S., & Echekki, T. (2017). PARTICLE-FILTER BASED UPSCALING FOR TURBULENT REACTING FLOW SIMULATIONS. INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, 15(1), 1–17. https://doi.org/10.1615/intjmultcompeng.2017017084

Zhao, B., & Zikry, M. A. (2017). Oxidation-induced failure in semi-crystalline organic thin films. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 109, 72–83. https://doi.org/10.1016/j.ijsolstr.2017.01.008

Xu, W., Zhang, Y., Cheng, G., Mathaudhu, S. N., Scattergood, R. O., Koch, C. C., … Zhu, Y. (2017). On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium. ACTA MATERIALIA, 131, 457–466. https://doi.org/10.1016/j.actamat.2017.04.015

Chen, X., Feng, Y., Zhong, W., & Kleinstreuer, C. (2017). Numerical investigation of the interaction, transport and deposition of multicomponent droplets in a simple mouth-throat model. JOURNAL OF AEROSOL SCIENCE, 105, 108–127. https://doi.org/10.1016/j.jaerosci.2016.12.001

She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory. COMPOSITE STRUCTURES, 165, 74–82. https://doi.org/10.1016/j.compstruct.2017.01.013

Rui, X., Zhang, C., Wang, S., & Wu, F. (2017, March 16). New Developments in Multibody System Dynamics and Its Applications 2015. ADVANCES IN MECHANICAL ENGINEERING, Vol. 9. https://doi.org/10.1177/1687814017695685

Fittipaldi, M., & Grace, L. R. (2017). Lipid-induced degradation in biocompatible poly(Styrene-Isobutylene-Styrene) (SIBS) thermoplastic elastomer. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 68, 80–87. https://doi.org/10.1016/j.jmbbm.2017.01.031

Myers, A., Hodges, R., & Jur, J. S. (2017). Human and environmental analysis of wearable thermal energy harvesting. ENERGY CONVERSION AND MANAGEMENT, 143, 218–226. https://doi.org/10.1016/j.enconman.2017.04.002

Yuan, C., & Wu, F. (2017). Exact-memory and memoryless control of linear systems with time-varying input delay using dynamic IQCs. AUTOMATICA, 77, 246–253. https://doi.org/10.1016/j.automatica.2016.11.015

Wang, Z., Luo, Y., Zhao, G., & Yuan, F.-G. (2017). Design and optimization of an OPFC ultrasonic linear phased array transducer. INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, 13(1), 57–69. https://doi.org/10.1007/s10999-015-9317-y

Cui, J., Yao, S., Huang, Q., Adams, J. G. M., & Zhu, Y. (2017). Controlling the self-folding of a polymer sheet using a local heater: the effect of the polymer-heater interface. SOFT MATTER, 13(21), 3863–3870. https://doi.org/10.1039/c7sm00568g

Mohanty, K., Blackwell, J., Egan, T., & Muller, M. (2017). CHARACTERIZATION OF THE LUNG PARENCHYMA USING ULTRASOUND MULTIPLE SCATTERING. ULTRASOUND IN MEDICINE AND BIOLOGY, 43(5), 993–1003. https://doi.org/10.1016/j.ultrasmedbio.2017.01.011

Kundu, P., Echekki, T., Pei, Y., & Som, S. (2017). An equivalent dissipation rate model for capturing history effects in non-premixed flames. COMBUSTION AND FLAME, 176, 202–212. https://doi.org/10.1016/j.combustflame.2016.10.001

Palagummi, S. V., & Yuan, F.-G. (2017). An enhanced performance of a horizontal diamagnetic levitation mechanism-based vibration energy harvester for low frequency applications. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 28(5), 578–594. https://doi.org/10.1177/1045389x16651152

Anand, N., & Gould, R. D. (2017). A convenient low order thermal model for heat transfer characteristics of single floored low-rise residential buildings. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2016, vol. 6b. https://doi.org/10.1115/imece2016-65254

Cheng, J., Liu, X., Liu, T., & Luo, H. (2017). A Parallel, High-Order Direct Discontinuous Galerkin Methods for the Navier-Stokes Equations on 3D Hybrid Grids. COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 21(5), 1231–1257. https://doi.org/10.4208/cicp.oa-2016-0090

Kuznetsov, I. A., & Kuznetsov, A. V. (2017). What mechanisms of tau protein transport could be responsible for the inverted tau concentration gradient in degenerating axons? MATHEMATICAL MEDICINE AND BIOLOGY-A JOURNAL OF THE IMA, 34(1), 125–150. https://doi.org/10.1093/imammb/dqv041

Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Utilization of the bootstrap method for determining confidence intervals of parameters for a model of MAP1B protein transport in axons. JOURNAL OF THEORETICAL BIOLOGY, 419, 350–361. https://doi.org/10.1016/j.jtbi.2017.02.017

Jin, Y., & Kuznetsov, A. V. (2017). Turbulence modeling for flows in wall bounded porous media: An analysis based on direct numerical simulations. PHYSICS OF FLUIDS, 29(4). https://doi.org/10.1063/1.4979062

Yang, T., Wu, F., & Zhang, L. (2017). Tracking control of hybrid systems with state-triggered jumps and stochastic events and its application. IET CONTROL THEORY AND APPLICATIONS, 11(7), 1024–1033. https://doi.org/10.1049/iet-cta.2016.1086

She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Research on nonlinear bending behaviors of FGM infinite cylindrical shallow shells resting on elastic foundations in thermal environments. COMPOSITE STRUCTURES, 170, 111–121. https://doi.org/10.1016/j.compstruct.2017.03.010

Ban, X. J., Liu, Y., Huang, X. L., & Wu, F. (2017). Output feedback control for fuzzy systems subject to actuator saturation based on fuzzy Lyapunov functions. Proceedings of the ASME 9th Annual Dynamic Systems and Control Conference, 2016, Vol 1. https://doi.org/10.1115/dscc2016-9879

Brendan T. O'Connor, Awartani, O. M., & Balar, N. (2017). Morphological considerations of organic electronic films for flexible and stretchable devices. MRS BULLETIN, 42(2), 108–114. https://doi.org/10.1557/mrs.2017.6

Zhu, Y. (2017). [Review of Mechanics of Crystalline Nanowires: An Experimental Perspective]. APPLIED MECHANICS REVIEWS, 69(1). https://doi.org/10.1115/1.4035511

Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). Hydration Sensing: A Wearable Hydration Sensor with Conformal Nanowire Electrodes (Adv. Healthcare Mater. 6/2017). Advanced Healthcare Materials, 6(6). https://doi.org/10.1002/ADHM.201770031

Frink, N. T., Murthy, P. C., Atkins, H. L., Viken, S. A., Petrilli, J. L., Gopalarathnam, A., & Paul, R. C. (2017, April). Computational Aerodynamic Modeling Tools for Aircraft Loss of Control. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Vol. 40, pp. 789–803. https://doi.org/10.2514/1.g001736

Liu, X., Xuan, L., Xia, Y., & Luo, H. (2017). A reconstructed discontinuous Galerkin method for the compressible Navier-Stokes equations on three-dimensional hybrid grids. COMPUTERS & FLUIDS, 152, 217–230. https://doi.org/10.1016/j.compfluid.2017.04.027

Li, L., Ngaile, G., & Hassan, T. (2017). A Novel Hybrid Heating Method for Mechanical Testing of Miniature Specimens at Elevated Temperature. JOURNAL OF MICRO AND NANO-MANUFACTURING, 5(2). https://doi.org/10.1115/1.4035954

Nabavi, S., & Chakrabortty, A. (2017). Structured Identification of Reduced-Order Models of Power Systems in a Differential-Algebraic Form. IEEE TRANSACTIONS ON POWER SYSTEMS, 32(1), 198–207. https://doi.org/10.1109/tpwrs.2016.2554154

Andersen, M. E., Modak, N., Winterrowd, C. K., Lee, C. W., Roberts, W. L., Wendt, J. O. L., & Linak, W. P. (2017). Soot, organics, and ultrafine ash from air-and oxy-fired coal combustion. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 36(3), 4029–4037. https://doi.org/10.1016/j.proci.2016.08.073

Sun, T., Scott, J. I., Wang, M., Kline, R. J., Bazan, G. C., & Brendan T. O'Connor. (2017). Plastic Deformation of Polymer Blends as a Means to Achieve Stretchable Organic Transistors. ADVANCED ELECTRONIC MATERIALS, 3(1). https://doi.org/10.1002/aelm.201600388

Suo, D., Jin, Z., Jiang, X., Dayton, P. A., & Jing, Y. (2017). Microbubble mediated dual-frequency high intensity focused ultrasound thrombolysis: An In vitro study. Applied Physics Letters, 110(2), 023703. https://doi.org/10.1063/1.4973857

Li, X.-L., Duan, X., Semenov, Y. G., & Kim, K. W. (2017). Electrical switching of antiferromagnets via strongly spin-orbit coupled materials. JOURNAL OF APPLIED PHYSICS, 121(2). https://doi.org/10.1063/1.4974027

Zheng, Z., Awartani, O. M., Gautam, B., Liu, D., Qin, Y., Li, W., … Hou, J. (2017). Efficient Charge Transfer and Fine-Tuned Energy Level Alignment in a THF- Processed Fullerene- Free Organic Solar Cell with 11.3% Efficiency. ADVANCED MATERIALS, 29(5). https://doi.org/10.1002/adma.201604241

Wang, Z., Martin, K. H., Huang, W., Dayton, P. A., & Jiang, X. (2017). Contrast Enhanced Superharmonic Imaging for Acoustic Angiography Using Reduced Form-Factor Lateral Mode Transmitters for Intravascular and Intracavity Applications. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 64(2), 311–319. https://doi.org/10.1109/tuffc.2016.2619687

Zhang, Y. Q., Yu, J. C., Wang, J. Q., Hanne, N. J., Cui, Z., Qian, C. G., … Gu, Z. (2017). Thrombin-responsive transcutaneous patch for auto-anticoagulant regulation. Advanced Materials, 29(4). https://doi.org/10.1002/adma.201770028

Berik, P., Chang, W.-Y., & Jiang, X. (2017). Piezoelectric d(36) in-plane shear-mode of lead-free BZT-BCT single crystals for torsion actuation. APPLIED PHYSICS LETTERS, 110(5). https://doi.org/10.1063/1.4975587

Ghasemi, M., Ye, L., Zhang, Q., Yan, L., Kim, J.-H., Awartani, O., … Ade, H. (2017). Panchromatic Sequentially Cast Ternary Polymer Solar Cells. ADVANCED MATERIALS, 29(4). https://doi.org/10.1002/adma.201604603

Tu, J. F., Rajule, N., Liu, Y., & Martin, J. (2017). Nanostructure diffraction analysis of a copper/single walled carbon nanotube nanocomposite synthesized by Laser Surface Implanting. CARBON, 113, 1–9. https://doi.org/10.1016/j.carbon.2016.11.004

Shu, L. L., Yong, Z. H., Jiang, X. N., Xie, Z. Q., & Huang, W. B. (2017). Flexoelectricity in low densification materials and its implication. Journal of Alloys and Compounds, 695, 1555–1560. https://doi.org/10.1016/j.jallcom.2016.10.298

Wu, X., Huang, H.-Y. S., Pankow, M., & Peters, K. (2017). Dynamic Polarization Microscopy for In-Situ Measurements of Collagen Fiber Realignment During Impact. MECHANICS OF BIOLOGICAL SYSTEMS AND MATERIALS, VOL 6, pp. 61–66. https://doi.org/10.1007/978-3-319-41351-8_9

Joglekar, S., & Pankow, M. (2017). Modeling of 3D woven composites using the digital element approach for accurate prediction of kinking under compressive loads. COMPOSITE STRUCTURES, 160, 547–559. https://doi.org/10.1016/j.compstruct.2016.10.070

Shu, L., Wan, M., Jiang, X., Li, F., Zhou, N., Huang, W., & Wang, T. (2017). Frequency dispersion of flexoelectricity in PMN-PT single crystal. AIP ADVANCES, 7(1). https://doi.org/10.1063/1.4973684

Joglekar, S., Von Hagel, K., Pankow, M., & Ferguson, S. (2017). Exploring how optimal composite design is influenced by model fidelity and multiple objectives. COMPOSITE STRUCTURES, 160, 964–975. https://doi.org/10.1016/j.compstruct.2016.10.089

Wang, L., Badra, J. A., Roberts, W. L., & Fang, T. (2017). Characteristics of spray from a GDI fuel injector for naphtha and surrogate fuels. FUEL, 190, 113–128. https://doi.org/10.1016/j.fuel.2016.11.015

Farmahini-Farahani, M., Saveliev, A. V., & Merchan-Merchan, W. (2017). Volumetric flame synthesis of mixed tungsten-molybdenum oxide nanostructures. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 36(1), 1055–1063. https://doi.org/10.1016/j.proci.2016.08.054

Yang, Y., Li, B., Chen, Z., Sui, N., Chen, Z., Xu, T., … Jing, Y. (2017). Sound insulation of multi-layer glass-fiber felts: Role of morphology. TEXTILE RESEARCH JOURNAL, 87(3), 261–269. https://doi.org/10.1177/0040517516629142

Yao, S., Cui, J., Cui, Z., & Zhu, Y. (2017). Soft electrothermal actuators using silver nanowire heaters. NANOSCALE, 9(11), 3797–3805. https://doi.org/10.1039/c6nr09270e

Misenheimer, C. T., & Terry, S. D. (2017). Modeling Hybrid Nuclear Systems With Chilled-Water Storage. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(1). https://doi.org/10.1115/1.4033858

Yang, R., Sen, P., O'Connor, B. T., & Kudenov, M. W. (2017). Intrinsic coincident full-Stokes polarimeter using stacked organic photovoltaics. APPLIED OPTICS, 56(6), 1768–1774. https://doi.org/10.1364/ao.56.001768

Yu, J., Qian, C., Zhang, Y., Cui, Z., Zhu, Y., Shen, Q., … Gu, Z. (2017). Hypoxia and H2O2 Dual-Sensitive Vesicles for Enhanced Glucose-Responsive Insulin Delivery. NANO LETTERS, 17(2), 733–739. https://doi.org/10.1021/acs.nanolett.6b03848

Liu, Y., Ban, X., Wu, F., & Lam, H. K. (2017). Gain-scheduling control of T-S fuzzy systems with actuator saturation. JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 32(3), 2579–2589. https://doi.org/10.3233/jifs-16546

Ming, T., Yang, W., Huang, X., Wu, Y., Li, X., & Liu, J. (2017). Analytical and numerical investigation on a new compact thermoelectric generator. ENERGY CONVERSION AND MANAGEMENT, 132, 261–271. https://doi.org/10.1016/j.enconman.2016.11.043

Ben Rejeb, S., & Echekki, T. (2017). Thermal radiation modeling using the LES-ODT framework for turbulent combustion flows. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 104, 1300–1316. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.074