Mechanical and Aerospace Engineering - 2009

SPECIAL ISSUE: Modeling Foreword. (2009). Journal of Engineered Fibers and Fabrics. Retrieved from https://publons.com/wos-op/publon/65200210/

Clemens, N. T., & Narayanaswamy, V. (2009). Shock/turbulent boundary layer interactions: Review of recent work on sources of unsteadiness. 39th AIAA Fluid Dynamics Conference. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78349243684&partnerID=MN8TOARS

Esposito, E. I., Ekkad, S. V., Kim, Y., & Dutta, P. (2009). Novel Jet Impingement Cooling Geometry for Combustor Liner Backside Cooling. Journal of Thermal Science and Engineering Applications, 1(2), 1–8. https://doi.org/10.1115/1.3202799

Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2009). Film Cooling Measurements for Cratered Cylindrical Inclined Holes. Journal of Turbomachinery, 131(1), 011005. https://doi.org/10.1115/1.2950055

Dhungel, A., Lu, Y., Phillips, W., Ekkad, S. V., & Heidmann, J. (2009). Film Cooling From a Row of Holes Supplemented With Antivortex Holes. Journal of Turbomachinery, 131(2). https://doi.org/10.1115/1.2950059

Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2009). Effect of trench width and depth on film cooling from cylindrical holes embedded in trenches. Journal of Turbomachinery, 131(1). https://doi.org/10.1115/1.2950057

Parida, P. R., & Ekkad, S. V. (2009). Numerical prediction of flow and heat transfer rates in metal based microchannels using lattice Boltzmann method. 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008, 1, 233–241. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70149096230&partnerID=MN8TOARS

Abraham, S., Navin, A. R., & Ekkad, S. V. (2009). Film cooling study of novel orthogonal entrance and shaped exit holes. Proceedings of the ASME Turbo Expo, 3(PART B), 829–838. https://doi.org/10.1115/GT2009-60003

Patil, S., Abraham, S., Tafti, D., Ekkad, S., Kim, Y., Dutta, P., … Srinivasan, R. (2009). Experimental and numerical investigation of convective heat transfer in a gas turbine can combustor. Proceedings of the ASME Turbo Expo, 3(PART B), 1363–1371. https://doi.org/10.1115/GT2009-59377

Fong, R.-Y., & Cheng, J.-H. (2009). Inclination and Crash Analysis for Hybrid Fuel Cell Scooter. Abaqus Taiwan Users’ Conference.

Fong, R.-Y., & Cheng, J.-H. (2009). Fuel Cell Stack Damage Evaluation for Hybrid Fuel Cell Scooter under Road Vibration Bumping Impact. Abaqus Taiwan Users’ Conference.

Fong, R.-Y., & Cheng, J.-H. (2009). Design and Failure Prediction of Insert for Composite Sandwich Structures. National Taiwan University.

Park, C., Propst, A., Peters, K., & Zikry, M. A. (2009). Sensor networks for in-situ failure identification in woven composites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2009, SMASIS2009, 2, 477–485. https://doi.org/10.1115/SMASIS2009-1283

Krim, J., Dawson, B. D., Barefoot, K., Pan, L., Pearson, J., Zikry, M., … Voevodin, A. (2009). Nanoscale design of adaptive tribological coatings for gold-ytrium based nanocomposites. Tribology - Materials, Surfaces and Interfaces, 3(4), 145–150. https://doi.org/10.1179/175158309X12586382418373

Pan, L., Dawson, B., Krim, J., Baker, C., Pearson, J., Zikry, M., & Vovoedin, A. (2009). Nanoscale design of adaptive tribological coatings. 2008 Proceedings of the STLE/ASME International Joint Tribology Conference, IJTC 2008, 65–67. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70349869620&partnerID=MN8TOARS

Kunzler, W., Zhu, Z., Wirthlin, M., Selfridge, R., Schultz, S., Propst, A., … Zikry, M. (2009). High repetition-rate full-spectrum interrogation of FBG sensors for dynamic measurements in composite laminates. Proceedings of SPIE - The International Society for Optical Engineering, 7293. https://doi.org/10.1117/12.816384

Propst, A., Peters, K., Zikry, M. A., Kunzler, W., Zhu, Z., Wirthlin, M., … Schultz, S. (2009). Dynamic, full-spectral interrogation of fiber bragg grating sensors for impact testing of composite laminates. Proceedings of SPIE - The International Society for Optical Engineering, 7503. https://doi.org/10.1117/12.835406

Hatem, T. M., & Zikry, M. A. (2009). Microstructural modelling of failure modes in crystalline materials. 12th International Conference on Fracture 2009, ICF-12, 8, 5923–5932. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84869835552&partnerID=MN8TOARS

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). An Analytical Expression for Predicting the Pressure Drop of Bimodal Filter Media. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). Two-dimensional Modeling of Nanoparticle Collection Efficiency in Bimodal Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

Hosseini, S. A., & Tafreshi, H. V. (2009). Three-dimensional Simulation of Particle Filtration in Electrospun Nanofibrous Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Minneapolis, Minnesota.

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). Modeling Pressure Drop and Collection Efficiency of Micro- and Nanofiber Filters. Nanofibers For The 3rd Millennium - Nano For Life. Presented at the Nanofibers For The 3rd Millennium - Nano For Life, Liberec, Czech Republic.

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). Modeling Fluid Infiltration in Fibrous Materials. Techtextil North America. Presented at the Techtextil North America, Las Vegas, NV.

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). Modeling Performance of Multi-Layer Composite Air Filters. Techtextil North America. Presented at the Techtextil North America, Las Vegas, NV.

Qashou, I., Tafreshi, H. V., & Pourdeyhimi, B. (2009). An Investigation of the Radiative Heat Transfer through Nonwoven Fibrous Materials. Journal of Engineered Fibers and Fabrics, 4(1), 155892500900400. https://doi.org/10.1177/155892500900400103

Nasr, H., Ahmadi, G., Tafreshi, H., & McLaughlin, J. B. (2009). Motion of Liquid Drops Through Complex 3D Clothing. Presented at the ASME 2009 Fluids Engineering Division Summer Meeting. https://doi.org/10.1115/fedsm2009-78283

Vahedi Tafreshi, H., A Rahman, M. S., Jaganathan, S., Wang, Q., & Pourdeyhimi, B. (2009). Analytical expressions for predicting permeability of bimodal fibrous porous media. Chemical Engineering Science, 64(6), 1154–1159. https://doi.org/10.1016/j.ces.2008.11.013

Ashari, A., & Vahedi Tafreshi, H. (2009). A two-scale modeling of motion-induced fluid release from thin fibrous porous media. Chemical Engineering Science, 64(9), 2067–2075. https://doi.org/10.1016/j.ces.2009.01.048

Ashari, A., & Vahedi Tafreshi, H. (2009). General capillary pressure and relative permeability expressions for through-plane fluid transport in thin fibrous sheets. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 346(1-3), 114–122. https://doi.org/10.1016/j.colsurfa.2009.06.001

Tahir, M. A., & Vahedi Tafreshi, H. (2009). Influence of fiber orientation on the transverse permeability of fibrous media. Physics of Fluids, 21(8). https://doi.org/10.1063/1.3211192

Ngaile, G., & Yang, C. (2009). Application of Finite Element Method in Metal forming Tribology. Transaction of the North American Manufacturing Research Institution of SME, 37, 379–386.

Kota, A. K. (2009). Commentary: Polymer/carbon-nanotube nanocomposites: from innovation to commercialization. Journal of Nanophotonics, 3(1), 030307. https://doi.org/10.1117/1.3248365

Narayan, R. (Ed.). (2009). Biomedical Materials. https://doi.org/10.1007/978-0-387-84872-3

Reyhanoglu, M., Drakunov, S. V., & Savella, P. (2009). Planar Maneuvering of a Spacecraft with Propellant Sloshing Using Switched Feedback. In A. M. Segerman, P. C. Lai, M. P. Wilkins, & M. E. Pittelkau (Eds.), Spaceflight Mechanics 2009 (pp. 2291–2302). San Diego, CA: American Astronautical Society/Univelt.

Reyhanoglu, M., & Drakunov, S. (2009). Novel Three-Axis Attitude Control Algorithms for Small Satellites Using only Magnetic Actuators. Advances in the Astronautical Sciences, 134, 2279–2290.

Idahosa, U., Abhishek, S., Joslin, A., Basu, S., & Xu, C. (2009). Flame Response to Equivalence Ratio Oscillations in Perturbed Swirl Stabilized Flames. ASME Turbo Expo 2009 - Combustion Dynamics. Presented at the ASME Turbo Expo 2009 - Combustion Dynamics., Orlando, FL.

Idahosa, U., Saha, A., Xu, C., & Basu, S. (2009). Frequency Response Characterization of Swirl Stabilized Flames Dynamics. Proceedings of the 6th US National Combustion Meeting of the Combustion Institute. Presented at the 6th US National Combustion Meeting of the Combustion Institute, Ann Arbor, MI.

Nicholson, D., Liu, J., Qiu, S., Mak, A., Trinh, J., Xu, C., & Vaidyanathan, R. (2009). Fabrication and Thermo-Mechanical Testing of a High Temperature Shape Memory Alloy Helical Actuator. Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion.

Pantokratoras, A., & Fang, T. (2009). Flow of a Weakly Conducting Fluid in a Channel Filled with a Porous Medium. Transport in Porous Media, 83(3), 667–676. https://doi.org/10.1007/s11242-009-9470-6

Fang, T., & Zhang, J. (2009). Thermal boundary layers over a shrinking sheet: an analytical solution. Acta Mechanica, 209(3-4), 325–343. https://doi.org/10.1007/s00707-009-0183-2

Fang, T., & Lee, C.-F. F. (2009). Soot visualization in an optical diesel engine fueled with diesel and bio-diesel fuels using multiple injection strategies. Fall Meeting of the Eastern States Section of the Combustion Institute 2009, 431–445. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946563690&partnerID=MN8TOARS

Fang, T., Coverdill, R. E., Lee, C. F., & White, R. A. (2009). Low-temperature combustion within a HSDI diesel engine using multiple-injection strategies. Journal of Engineering for Gas Turbines and Power, 131(6). https://doi.org/10.1115/1.3093999

Locascio, M., Peng, B., Zapol, P., Zhu, Y., Li, S., Belytschko, T., & Espinosa, H. D. (2009). Tailoring the Load Carrying Capacity of MWCNTs Through Inter-shell Atomic Bridging. Experimental Mechanics, 49(2), 169–182. https://doi.org/10.1007/S11340-008-9216-3

Reyhanoglu, M., Ton, C., & Drakunov, S. (2009). Attitude Stabilization of a Nadir-Pointing Small Satellite Using Only Magnetic Actuators. IFAC Proceedings Volumes, 42(19), 292–297. https://doi.org/10.3182/20090921-3-tr-3005.00052

Drakunov, S. V., Reyhanoglu, M., & Singh, B. (2009). Sliding Mode Control of DC-DC Power Converters. IFAC Proceedings Volumes, 42(19), 237–242. https://doi.org/10.3182/20090921-3-TR-3005.00043

Yin, J., Chen, X., & Sheinman, I. (2009). Anisotropic buckling patterns in spheroidal film/substrate systems and their implications in some natural and biological systems. Journal of the Mechanics and Physics of Solids, 57(9), 1470–1484. https://doi.org/10.1016/j.jmps.2009.06.002

Yin, J., Bar-Kochba, E., & Chen, X. (2009). Mechanical self-assembly fabrication of gears. Soft Matter, 5(18), 3469. https://doi.org/10.1039/b904635f

Ryu, J., Dehlinger, D., Heller, M., & Hahn, T. (2009). Electrophoretic Layer-by-Layer Assembly of Biotin/Avidin Functionalized Nanoparticles. Particle & Particle Systems Characterization, 26(5-6), 275–282. https://doi.org/10.1002/ppsc.200900090

Vermillion, C., Sun, J., & Butts, K. (2009). Model predictive control allocation - Design and experimental results on a thermal management system. 2009 American Control Conference. Presented at the 2009 American Control Conference. https://doi.org/10.1109/acc.2009.5160203

Vermillion, C., Sun, J., & Butts, K. (2009). Modeling, Control Design, and Experimental Validation of an Overactuated Thermal Management System for Engine Dynamometer Applications. IEEE Transactions on Control Systems Technology, 17(3), 540–551. https://doi.org/10.1109/tcst.2008.2001267

Muller, M., Gennisson, J.-L., Deffieux, T., Tanter, M., & Fink, M. (2009). Quantitative Viscoelasticity Mapping of Human Liver Using Supersonic Shear Imaging: Preliminary In Vivo Feasability Study. Ultrasound in Medicine & Biology, 35(2), 219–229. https://doi.org/10.1016/j.ultrasmedbio.2008.08.018

Pankow, M., Waas, A. M., Yen, C.-F., & Ghiorse, S. (2009). A new lamination theory for layered textile composites that account for manufacturing induced effects. Composites Part A: Applied Science and Manufacturing, 40(12), 1991–2003. https://doi.org/10.1016/j.compositesa.2009.08.021

Veeramani, A. S., Crews, J. H., & Buckner, G. D. (2009). Hysteretic recurrent neural networks: a tool for modeling hysteretic materials and systems. Smart Materials and Structures, 18(7), 075004. https://doi.org/10.1088/0964-1726/18/7/075004

An, K. H., O’Connor, B., Pipe, K. P., & Shtein, M. (2009). Organic photodetector with spectral response tunable across the visible spectrum by means of internal optical microcavity. Organic Electronics, 10(6), 1152–1157. https://doi.org/10.1016/j.orgel.2009.06.003

Gershon, A. L., Kota, A. K., & Bruck, H. A. (2009). Characterization of Quasi-static Mechanical Properties of Polymer Nanocomposites Using a New Combinatorial Approach. Journal of Composite Materials, 43(22), 2587–2598. https://doi.org/10.1177/0021998309345311

Ol, M. V., Reeder, M., Fredberg, D., McGowan, G. Z., Gopalarathnam, A., & Edwards, J. R. (2009). Computation vs. Experiment for High-Frequency Low-Reynolds Number Airfoil Plunge. International Journal of Micro Air Vehicles, 1(2), 99–119. https://doi.org/10.1260/175682909789498279

Fang, T., & Zhang, J. (2009). Closed-form exact solutions of MHD viscous flow over a shrinking sheet. Communications in Nonlinear Science and Numerical Simulation, 14(7), 2853–2857. https://doi.org/10.1016/j.cnsns.2008.10.005

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., Brenner, D. W., Elert, M., … Butler, W. T. (2009). ATOMISTIC STUDIES OF VOID-GROWTH BASED YIELD CRITERIA IN SINGLE CRYSTAL CU AT HIGH STRAIN RATES. 1195, 769–772. https://doi.org/10.1063/1.3295254

Chang, C.-H., Tan, C.-W., Miao, J., & Barbastathis, G. (2009). Self-assembled ferrofluid lithography: patterning micro and nanostructures by controlling magnetic nanoparticles. Nanotechnology, 20(49), 495301. https://doi.org/10.1088/0957-4484/20/49/495301

Xu, C., Tang, Y., & Jackson, M. J. (2009). Survey on various control techniques in micro grinding processes. International Journal of Nanomanufacturing, 3(4), 398–408. https://doi.org/10.1504/IJNM.2009.027503

Idahosa, U., Khatami, N., Saha, A., Xu, C., & Basu, S. (2009). On the fluid dynamics of acoustically perturbed non-premixed swirling flames. Fall Meeting of the Eastern States Section of the Combustion Institute 2009, 720–725. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946594823&partnerID=MN8TOARS

Tang, Y., Xu, C., & Jackson, M. (2009). Geometrical adaptive controller for tool deflection compensation in helical end milling processes. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 377–383. https://doi.org/10.1115/MSEC2009-84218

Shamieh, F., & Xu, C. (2009). Generation of optimal functions using particle swarm method over discrete intervals. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS. https://doi.org/10.1109/NAFIPS.2009.5156484

Jackson, M. J., Whitfield, M. D., Xu, C., & Ahmed, W. (2009). Diamond coated microtools for machining compact bone. International Journal of Nano and Biomaterials, 2(6), 505–519. https://doi.org/10.1504/IJNBM.2009.028340

Idahosa, U., Saha, A., Xu, C., & Basu, S. (2009). Characterization of combustion dynamics in swirl stabilized flames. American Society of Mechanical Engineers, Power Division (Publication) PWR, 517–531. https://doi.org/10.1115/POWER2009-81168

Tang, Y., Xu, C., & Jackson, M. J. (2009). Adaptive compensation of tool deflection in micromilling processes. International Journal of Nanomanufacturing, 3(1-2), 159–168. https://doi.org/10.1504/IJNM.2009.027056

Xu, C., & Shin, Y. C. (2009). A stable hierarchical fuzzy control design for certain non-linear systems based on input-output passivity theory. Control and Intelligent Systems, 37(2), 103–113. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-69949109741&partnerID=MN8TOARS

Jackson, M. J., Xu, C., & Ahmed, W. (2009). A multifunctional high-speed spindle for micromachining medical materials. International Journal of Nano and Biomaterials, 2(6), 520–539. https://doi.org/10.1504/IJNBM.2009.028341

Joslin, A. J., & Xu, C. (2009). A hybrid modeling technique for partially-known systems using linear regression and neural network. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, 2, 365–375. https://doi.org/10.1115/MSEC2009-84217

Tang, M., Huang, H.-Y., Meethong, N., Kao, Y.-H., Carter, W. C., & Chiang, Y.-M. (2009). Model for the Particle Size, Overpotential, and Strain Dependence of Phase Transition Pathways in Storage Electrodes: Application to Nanoscale Olivines. Chemistry of Materials, 21(8), 1557–1571. https://doi.org/10.1021/cm803172s

Xu, C. (2009). Persistence, Consistence and Patience. In Tips on Getting an Academic Position. Lulu Web.

Jackson, M. J., Ahmed, W., & Xu, C. (2009). Fundamentals of Machining. In Machining with Nanomaterials. Springer.

Jackson, M. J., Evans, J., Xu, C., & Ahmed, W. (2009). Formation of Nanostructured Metals. In Machining with Nanomaterials. Springer.

Subbareddy, P. K., & Candler, G. V. (2009). A fully discrete, kinetic energy consistent finite-volume scheme for compressible flows. JOURNAL OF COMPUTATIONAL PHYSICS, 228(5), 1347–1364. https://doi.org/10.1016/j.jcp.2008.10.026

Luo, H., Luo, L. Q., & Xu, K. (2009). A Discontinuous Galerkin method based on a BGK scheme for the Navier-Stokes equations on arbitrary grids. Advances in Applied Mathematics & Mechanics, 1(3), 301–318. https://doi.org/10.1142/9789814313377_0006

Propst, A., Garrett, R., Park, C., Peters, K., & Zikry, M. (2009). Sensor networks for in-situ failure identification in woven composites. SMASIS 2009, vol 2, 7293, 477–485. https://doi.org/10.1117/12.815743

Furst, S. J., Bumgarner, D., & Seelecke, S. (2009). Quantification of the effectiveness of various conductive and non-conductive epoxies as an attachment method for small SMA wires. SMASIS 2009, vol 2, 409–418. https://doi.org/10.1115/smasis2009-1450

York, A., Hodgins, M., & Seelecke, S. (2009). Electro-mechanical analysis of a biased dielectric EAP actuator. SMASIS 2009, vol 1, 289–297. https://doi.org/10.1115/smasis2009-1441

Echekki, T. (2009). Multiscale methods in turbulent combustion: Strategies and computational challenges. Computational Science & Discovery, 3, 013001. https://doi.org/10.1088/1749-4699/2/1/013001

Athalye, R., & Eckerlin, H. M. (2009). Measurement and analysis of the annual daylighting performance of a middle school in North Carolina. ES2009: Proceedings of the ASME 3rd International Conference on Energy Sustainability, Vol 2, 351–361. https://doi.org/10.1115/es2009-90329

Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2009). Influence of Electrode Characteristics on DC Point-to-Plane Breakdown in High-Pressure Gaseous and Supercritical Carbon Dioxide. IEEE TRANSACTIONS ON PLASMA SCIENCE, 37(6), 1078–1083. https://doi.org/10.1109/tps.2009.2018844

Tang, M., Huang, H.-Y. S., Meethong, N., Kao, Y.-H., Carter, W. C., & Chiang, Y.-M. (2009). Modeling the overpotential, particle size and strain dependence of phase transition pathways in battery electrodes: Example in nanoscale olivines. Chemistry of Materials, 21, 1557–1571.

Wilson, D. A., & Lyons, K. M. (2009). On Diluted-Fuel Combustion Issues in Burning Biogas Surrogates. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 131(4). https://doi.org/10.1115/1.4000152

Ma, X., Vazhkudai, S. S., & Zhang, Z. (2009). Improving Data Availability for Better Access Performance: A Study on Caching Scientific Data on Distributed Desktop Workstations. JOURNAL OF GRID COMPUTING, 7(4), 419–438. https://doi.org/10.1007/s10723-009-9122-7

Hatem, T. M., & Zikry, M. A. (2009). Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys. PHILOSOPHICAL MAGAZINE, 89(33), 3087–3109. https://doi.org/10.1080/14786430903185999

Bai, X., Sandukas, S., Appleford, M. R., Ong, J. L., & Rabiei, A. (2009). Deposition and investigation of functionally graded calcium phosphate coatings on titanium. ACTA BIOMATERIALIA, 5(9), 3563–3572. https://doi.org/10.1016/j.actbio.2009.05.013

Levedahl, B. A., & Silverberg, L. (2009). Control of Underwater Vehicles in Full Unsteady Flow. IEEE JOURNAL OF OCEANIC ENGINEERING, 34(4), 656–668. https://doi.org/10.1109/JOE.2009.2027798

Ramasubramanian, M. K., & Tiruthani, K. (2009). A Capacitive Displacement Sensing Technique for Early Detection of Unbalanced Loads in a Washing Machine. SENSORS, 9(12), 9559–9571. https://doi.org/10.3390/s91209559

Merchan-Merchan, W., Saveliev, A. V., & Desai, M. (2009). Volumetric flame synthesis of well-defined molybdenum oxide nanocrystals. NANOTECHNOLOGY, 20(47). https://doi.org/10.1088/0957-4484/20/47/475601

Nield, D. A., & Kuznetsov, A. V. (2009). Thermal instability in a porous medium layer saturated by a nanofluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(25-26), 5796–5801. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.023

Nield, D. A., & Kuznetsov, A. V. (2009). The Cheng-Minkowycz problem for natural convective boundary-layer flow in a porous medium saturated by a nanofluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52(25-26), 5792–5795. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.024

French, D. B., & Mazzoleni, A. P. (2009). Parametric study of the diversion of a near Earth object on an Earth intersecting trajectory. ACTA ASTRONAUTICA, 65(11-12), 1698–1705. https://doi.org/10.1016/j.actaastro.2009.04.023

Pearson, J. D., Gao, G., Zikry, M. A., & Harrison, J. A. (2009). Nanoindentation of model diamond nanocomposites: Hierarchical molecular dynamics and finite-element simulations. COMPUTATIONAL MATERIALS SCIENCE, 47(1), 1–11. https://doi.org/10.1016/j.commatsci.2009.06.007

Avramenko, A. A., & Kuznetsov, A. V. (2009). Instability of a slip flow in a curved channel formed by two concentric cylindrical surfaces. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 28(6), 722–727. https://doi.org/10.1016/j.euromechflu.2009.06.003

Echekki, T., & Gupta, K. G. (2009). Hydrogen autoignition in a turbulent jet with preheated co-flow air. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 34(19), 8352–8377. https://doi.org/10.1016/j.ijhydene.2009.06.085

Vendeix, F. A. P., Munoz, A. M., & Agris, P. F. (2009). Free energy calculation of modified base-pair formation in explicit solvent: A predictive model. RNA, 15(12), 2278–2287. https://doi.org/10.1261/rna.1734309

Cai, X. J., & Wu, F. (2009). A Robust fault tolerant control approach for LTI systems with actuator and sensor faults. CCDC 2009: 21st Chinese Control and Decision Conference, vols 1-6, Proceedings, 890–895. https://doi.org/10.1109/ccdc.2009.5191903

Zhu, Y., Xu, F., Qin, Q., Fung, W. Y., & Lu, W. (2009). Mechanical Properties of Vapor-Liquid-Solid Synthesized Silicon Nanowires. NANO LETTERS, 9(11), 3934–3939. https://doi.org/10.1021/nl902132w

Kulshrestha, P., Wang, L., Chow, M. Y., & Lukic, S. (2009). Intelligent energy management system simulator for PHEVs at municipal parking deck in a smart grid environment. 2009 ieee power & energy society general meeting, vols 1-8, 2157–2162.

Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2009, March). Calibration of a single-mode polymer optical fiber large-strain sensor. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 20. https://doi.org/10.1088/0957-0233/20/3/034016

Ma, J. B., & Zikry, M. A. (2009). Nanoindentation and microstructural evolution of polycrystalline gold. JOURNAL OF MATERIALS RESEARCH, 24(3), 1093–1104. https://doi.org/10.1557/jmr.2009.0133

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2009). Influence of injection parameters on the transition from PCCI combustion to diffusion combustion in a small-bore HSDI diesel engine. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 10(3), 285–295. https://doi.org/10.1007/s12239-009-0033-1

Fuller, J. D., & Tolson, R. H. (2009). Improved Method for Estimation of Spacecraft Free-Molecular Aerodynamic Properties. Journal of Spacecraft and Rockets, 46(5), 938–948.

Jernigan, S. R., Fahmy, Y., & Buckner, G. D. (2009). Implementing a Remote Laboratory Experience Into a Joint Engineering Degree Program: Aerodynamic Levitation of a Beach Ball. IEEE TRANSACTIONS ON EDUCATION, 52(2), 205–213. https://doi.org/10.1109/TE.2008.924217

Shi, J., & Zikry, M. A. (2009). Grain-boundary interactions and orientation effects on crack behavior in polycrystalline aggregates. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 46(21), 3914–3925. https://doi.org/10.1016/j.ijsolstr.2009.07.019

Sun, L., Irving, D. L., Zikry, M. A., & Brenner, D. W. (2009). First-principles investigation of the structure and synergistic chemical bonding of Ag and Mg at the Al vertical bar Omega interface in a Al-Cu-Mg-Ag alloy. ACTA MATERIALIA, 57(12), 3522–3528. https://doi.org/10.1016/j.actamat.2009.04.006

French, D. B., & Mazzoleni, A. P. (2009). Asteroid Diversion Using a Long Tether and Ballast. JOURNAL OF SPACECRAFT AND ROCKETS, 46(3), 645–661. https://doi.org/10.2514/1.40828

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2009). A realistic modeling of fluid infiltration in thin fibrous sheets. JOURNAL OF APPLIED PHYSICS, 105(11). https://doi.org/10.1063/1.3141737

Choi, H.-S., Kim, T.-H., Moon, W.-J., & Ro, P. I. (2009). Study on a ultra-light dual revolute manipulator with high joint torque. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 10(4), 49–56. https://doi.org/10.1007/s12541-009-0070-8

Shmelev, V. M., Saveliev, A. V., & Kennedy, L. A. (2009). Plasma Chemical Reactor with Exploding Water Jet. PLASMA CHEMISTRY AND PLASMA PROCESSING, 29(4), 275–290. https://doi.org/10.1007/s11090-009-9177-z

Dong, K., & Wu, F. (2009, March). Online Switching Control of LFT Parameter-Dependent Systems. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, Vol. 131. https://doi.org/10.1115/1.3023140

Merchan-Merchan, W., Saveliev, A. V., & Taylor, A. M. (2009). [Review of Nucleation and growth mechanism for flame synthesis of MoO2 hollow microchannels with nanometer wall thickness]. MICRON, 40(8), 821–826. https://doi.org/10.1016/j.micron.2009.07.002

Zheng, Q., & Wu, F. (2009). Nonlinear H-infinity Control Designs with Axisymmetric Spacecraft Control. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 32(3), 850–859. https://doi.org/10.2514/1.40060

Hatem, T. M., & Zikry, M. A. (2009). Modeling of Lath Martensitic Microstructures and Failure Evolution in Steel Alloys. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 131(4). https://doi.org/10.1115/1.3183780

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2009). Macroscopic modeling of slow axonal transport of rapidly diffusible soluble proteins. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 36(4), 293–296. https://doi.org/10.1016/j.icheatmasstransfer.2009.01.005

Elkhodary, K., Sun, L., Irving, D. L., Brenner, D. W., Ravichandran, G., & Zikry, M. (2009). Integrated experimental, atomistic, and microstructurally based finite element investigation of the dynamic compressive behavior of 2139 aluminum. Journal of Applied Mechanics, Transactions ASME, 76(5), 1–9. https://doi.org/10.1115/1.3129769

Anderson, A., & Peters, K. (2009). Finite Element Simulation of Self-Writing Waveguide Formation Through Photopolymerization. JOURNAL OF LIGHTWAVE TECHNOLOGY, 27(24), 5529–5536. https://doi.org/10.1109/JLT.2009.2031823

Purser, M. F., Richards, A. L., Cook, R. C., Osborne, J. A., Cormier, D. R., & Buckner, G. D. (2009). Evaluation of a Shape Memory Alloy Reinforced Annuloplasty Band for Minimally Invasive Mitral Valve Repair. ANNALS OF THORACIC SURGERY, 88(4), 1312–1316. https://doi.org/10.1016/j.athoracsur.2009.04.133

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2009). Effect of protein degradation in the axon on the speed of the bell-shaped concentration wave in slow axonal transport. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 36(7), 641–645. https://doi.org/10.1016/j.icheatmasstransfer.2009.04.002

Nojavan, S., & Yuan, F. G. (2009). Damage identification using electromagnetic waves based on born imaging algorithm. Journal of Engineering Mechanics, 135(7), 717–728. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:7(717)

Cassidy, D. A., Edwards, J. R., & Tian, M. (2009). An investigation of interface-sharpening schemes for multi-phase mixture flows. JOURNAL OF COMPUTATIONAL PHYSICS, 228(16), 5628–5649. https://doi.org/10.1016/j.jcp.2009.02.028

Chung, B.-M., Lim, Y.-K., & Buckner, G. D. (2009). A Learning Method for Multivariable PID Control Synthesis Based on Estimated Plant Jacobian. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 7(5), 737–744. https://doi.org/10.1007/s12555-009-0506-z

Crozier, C. R., Havlin, J. L., Hoyt, G. D., Rideout, J. W., & McDaniel, R. (2009). Three Experimental Systems to Evaluate Phosphorus Supply from Enhanced Granulated Manure Ash. AGRONOMY JOURNAL, 101(4), 880–888. https://doi.org/10.2134/agronj2008.0187x

Hatem, T. M., & Zikry, M. A. (2009). Shear pipe effects and dynamic shear-strain localization in martensitic steels. ACTA MATERIALIA, 57(15), 4558–4567. https://doi.org/10.1016/j.actamat.2009.06.028

Zheng, Q., & Wu, F. (2009). Regional stabilisation of polynomial non-linear systems using rational Lyapunov functions. INTERNATIONAL JOURNAL OF CONTROL, 82(9), 1605–1615. https://doi.org/10.1080/00207170802627267

Zheng, Q., & Wu, F. (2009). Lyapunov Redesign of Adaptive Controllers for Polynomial Nonlinear Systems. 2009 AMERICAN CONTROL CONFERENCE, VOLS 1-9, pp. 5144–5149. https://doi.org/10.1109/acc.2009.5160128

Fang, T. G., Coverdill, R. E., Lee, C. F. F., & White, R. A. (2009). Low-temperature combustion within a HSDI eiesel engine using multiple-injection strategies. Journal of Engineering for Gas Turbines and Power, 131(6).

Yang, S., & Seelecke, S. (2009, October). FE analysis of SMA-based bio-inspired bone-joint system. SMART MATERIALS & STRUCTURES, Vol. 18. https://doi.org/10.1088/0964-1726/18/10/104020

Ward, T., Wey, C., Glidden, R., Hosoi, A. E., & Bertozzi, A. L. (2009). Experimental study of gravitation effects in the flow of a particle-laden thin film on an inclined plane. Physics of Fluids (Woodbury, N.Y.), 21(8).

Xiang, P., Kuznetsov, A. V., & Seyam, A. M. (2009). Combined numerical and experimental investigation on the effect of jet pressure and forming belt geometry on the hydroentanglement process. JOURNAL OF THE TEXTILE INSTITUTE, 100(4), 293–304. https://doi.org/10.1080/00405000701770563

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2009). Atomic scale simulations of ductile failure micromechanisms in nanocrystalline Cu at high strain rates. PHYSICAL REVIEW B, 80(10). https://doi.org/10.1103/physrevb.80.104108

French, D. B., & Mazzoleni, A. P. (2009). Near-Earth object threat mitigation using a tethered ballast mass. Journal of Aerospace Engineering, 22(4), 460–465. https://doi.org/10.1061/(ASCE)0893-1321(2009)22:4(460)

Pearson, J. D., Zikry, M. A., & Wahl, K. J. (2009). Microstructural modeling of adaptive nanocomposite coatings for durability and wear. WEAR, 266(9-10), 1003–1012. https://doi.org/10.1016/j.wear.2009.02.004

Li, J., & Kleinstreuer, C. (2009). Microfluidics analysis of nanoparticle mixing in a microchannel system. MICROFLUIDICS AND NANOFLUIDICS, 6(5), 661–668. https://doi.org/10.1007/s10404-008-0341-1

Schultz, S., Kunzler, W., Zhu, Z., Wirthlin, M., Selfridge, R., Propst, A., … Peters, K. (2009). Full-spectrum interrogation of fiber Bragg grating sensors for dynamic measurements in composite laminates. SMART MATERIALS AND STRUCTURES, 18(11). https://doi.org/10.1088/0964-1726/18/11/115015

Kuznetsov, A. V., & Nield, D. A. (2009). Forced convection with counterflow in a circular tube occupied by a porous medium. Journal of Porous Media, 12(7), 657–666. https://doi.org/10.1615/JPorMedia.v12.i7.40

Nield, D. A., & Kuznetsov, A. V. (2009). Forced Convection With Laminar Pulsating Counterflow in a Saturated Porous Channel. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 131(10). https://doi.org/10.1115/1.3180810

Vendra, L., Neville, B., & Rabiei, A. (2009). Fatigue in aluminum-steel and steel-steel composite foams. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 517(1-2), 146–153. https://doi.org/10.1016/j.msea.2009.03.075

Ward, T., & Hourigan, W. (2009). Experimental investigation of transition to laminar mixing of a homogeneous viscous liquid in a tilted-rotating tank. CHEMICAL ENGINEERING SCIENCE, 64(23), 4919–4928. https://doi.org/10.1016/j.ces.2009.07.032

Yang, T. H., Nori, S., Zhou, H. H., & Narayan, J. (2009). Defect-mediated room temperature ferromagnetism in vanadium dioxide thin films. Applied Physics Letters, 95(10).

Choi, J.-I., Edwards, J. R., & Baurle, R. A. (2009, September). Compressible Boundary-Layer Predictions at High Reynolds Number Using Hybrid LES/RANS Methods. AIAA JOURNAL, Vol. 47, pp. 2179–2193. https://doi.org/10.2514/1.41598

Fang, T., Lin, Y.-C., Foong, T. M., & Lee, C.-fon. (2009). Biodiesel combustion in an optical HSDI diesel engine under low load premixed combustion conditions. FUEL, 88(11), 2154–2162. https://doi.org/10.1016/j.fuel.2009.02.033

Fang, T., Coverdill, R. E., Lee, C.-fon F., & White, R. A. (2009). Air-fuel mixing and combustion in a small-bore direct injection optically accessible diesel engine using a retarded single injection strategy. FUEL, 88(11), 2074–2082. https://doi.org/10.1016/j.fuel.2009.05.032

Narayan, J., Nori, S., Ramachandran, S., & Prater, J. T. (2009). The synthesis and magnetic properties of a nanostructured Ni-MgO system. JOM, 61(6), 76–81. https://doi.org/10.1007/s11837-009-0093-8

Nield, D. A., & Kuznetsov, A. V. (2009). The effect of a transition layer between a fluid and a porous medium: shear flow in a channel. TRANSPORT IN POROUS MEDIA, 78(3), 477–487. https://doi.org/10.1007/s11242-009-9342-0

Fang, T., Zhang, J., & Yao, S. (2009). Slip MHD viscous flow over a stretching sheet - An exact solution. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 14(11), 3731–3737. https://doi.org/10.1016/j.cnsns.2009.02.012

Garrett, R. C., Peters, K. J., & Zikry, M. A. (2009). In-situ impact-induced damage assessment of woven composite laminates through a fibre Bragg grating sensor network. AERONAUTICAL JOURNAL, 113(1144), 357–370. https://doi.org/10.1017/S0001924000003031

Veeramani, A. S., Crews, J. H., & Buckner, G. D. (2009). Hysteretic recurrent neural networks: A tool for modeling hysteretic materials and systems. Smart Materials & Structures, 18(7).

Shi, J., & Zikry, M. A. (2009). Grain size, grain boundary sliding, and grain boundary interaction effects on nanocrystalline behavior. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 520(1-2), 121–133. https://doi.org/10.1016/j.msea.2009.05.012

Fang, T.-G., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2009). Effect of the injection angle on liquid spray development in a high-speed direct-injection optical diesel engine. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 223(D8), 1077–1092. https://doi.org/10.1243/09544070JAUTO1221

Ferguson, S., Kasprzak, E., & Lewis, K. (2009, August). Designing a family of reconfigurable vehicles using multilevel multidisciplinary design optimization. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, Vol. 39, pp. 171–186. https://doi.org/10.1007/s00158-008-0319-3

Pearson, J. D., Zikry, M. A., & Wahl, K. (2009, June 15). Computational design of thin-film nanocomposite coatings for optimized stress and velocity accommodation response. WEAR, Vol. 267, pp. 1137–1145. https://doi.org/10.1016/j.wear.2008.11.027

Merchan-Merchan, W., Saveliev, A. V., & Nguyen, V. (2009). Opposed flow oxy-flame synthesis of carbon and oxide nanostructures on molybdenum probes. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 32, 1879–1886. https://doi.org/10.1016/j.proci.2008.07.025

Xiang, P., Kuznetsov, A. V., & Seyam, A. M. (2009). Experimental and numerical investigation of the peeling force required for the detachment of fabric from the forming belt in the hydroentanglement process. JOURNAL OF THE TEXTILE INSTITUTE, 100(2), 99–110. https://doi.org/10.1080/00405000701679723

Fang, T., & Lee, C.-fon F. (2009). Bio-diesel effects on combustion processes in an HSDI diesel engine using advanced injection strategies. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 32, 2785–2792. https://doi.org/10.1016/j.proci.2008.07.031

Prince, J. L., Dec, J. A., & Tolson, R. H. (2009). Autonomous Aerobraking Using Thermal Response Surface Analysis. JOURNAL OF SPACECRAFT AND ROCKETS, 46(2), 292–298. https://doi.org/10.2514/1.32793

Gopalarathnam, A., & Norris, R. K. (2009). Ideal Lift Distributions and Flap Angles for Adaptive Wings. Journal of Aircraft, 46(2), 562–571. https://doi.org/10.2514/1.38713

Ngaile, G., & Yang, C. (2009). Analytical Model for the Characterization of the Guiding Zone Tribotest for Tube Hydroforming. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 131(2). https://doi.org/10.1115/1.3090888

Fang, T., & Lee, C.-fon F. (2009). Three-dimensional wall-bounded laminar boundary layer with span-wise cross free stream and moving boundary. ACTA MECHANICA, 204(3-4), 235–248. https://doi.org/10.1007/s00707-008-0032-8

Aggarwal, R., Nori, S., Jin, C., Pant, P., Trichy, G. R., Kumar, D., … Narayan, R. J. (2009). Magnetic properties and their dependence on deposition parameters of Co/Al2O3 multilayers grown by pulsed laser deposition. ACTA MATERIALIA, 57(6), 2040–2046. https://doi.org/10.1016/j.actamat.2009.01.018

Kuznetsov, A. V., & Avramenko, A. A. (2009). A macroscopic model of traffic jams in axons. MATHEMATICAL BIOSCIENCES, 218(2), 142–152. https://doi.org/10.1016/j.mbs.2009.01.005

Jawad, F. F., & Zikry, M. A. (2009). The Effects of Grain-boundary Orientations on Failure Behavior in FCC Polycrystalline Systems. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 18(4), 341–369. https://doi.org/10.1177/1056789508097547

Ranganath, B., & Echekki, T. (2009). ODT Closure with Extinction and Reignition in Piloted Methane-Air Jet Diffusion Flames. COMBUSTION SCIENCE AND TECHNOLOGY, 181(4), 570–596. https://doi.org/10.1080/00102200802529993

Toledo, M., Bubnovich, V., Saveliev, A., & Kennedy, L. (2009). Hydrogen production in ultrarich combustion of hydrocarbon fuels in porous media. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 34(4), 1818–1827. https://doi.org/10.1016/j.ijhydene.2008.12.001

Kuznetsov, A. V., & Nield, D. A. (2009). Forced Convection with Laminar Pulsating Counterflow in a Saturated Porous Circular Tube. TRANSPORT IN POROUS MEDIA, 77(3), 447–462. https://doi.org/10.1007/s11242-008-9271-3

Ma, J. B., & Zikry, M. A. (2009). Microstructural modeling of nanoidentational polycrsytalline gold with random high angle grain-boundaries. Reviews on Advanced Materials Science, 19(1-2), 78–92. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-64649089133&partnerID=MN8TOARS

Zhu, Y., Liechti, K. M., & Ravi-Chandar, K. (2009). Direct extraction of rate-dependent traction-separation laws for polyurea/steel interfaces. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 46(1), 31–51. https://doi.org/10.1016/j.ijsolstr.2008.08.019

Nield, D. A., Kuznetsov, A. V., & Simmons, C. T. (2009). The Effect of Strong Heterogeneity on the Onset of Convection in a Porous Medium. TRANSPORT IN POROUS MEDIA, 77(2), 169–186. https://doi.org/10.1007/s11242-008-9297-6

Cox, C., Gopalarathnam, A., & Hall, C. E., Jr. (2009). Development of Stable Automated Cruise Flap for an Aircraft with Adaptive Wing. Journal of Aircraft, 46(1), 301–311. https://doi.org/10.2514/1.38684

Abdi, O., Wong, K. C., Hassan, T., Peters, K. J., & Kowalsky, M. J. (2009). Cleaving of solid single mode polymer optical fiber for strain sensor applications. OPTICS COMMUNICATIONS, 282(5), 856–861. https://doi.org/10.1016/j.optcom.2008.11.046

Kuznetsov, A. V., & Avramenko, A. A. (2009). A minimal hydrodynamic model for a traffic jam in an axon. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 36(1), 1–5. https://doi.org/10.1016/j.icheatmasstransfer.2008.09.004

Fang, T., Zhang, J., & Yao, S.-S. (2009). Viscous flow over an unsteady shrinking sheet with mass transfer. Chinese Physics Letters, 26(1). https://doi.org/10.1088/0256-307x/26/1/014703

Kuznetsov, A. V., & Nield, D. A. (2009). Thermally Developing Forced Convection in a Porous Medium Occupied by a Rarefied Gas: Parallel Plate Channel or Circular Tube with Walls at Constant Heat Flux. TRANSPORT IN POROUS MEDIA, 76(3), 345–362. https://doi.org/10.1007/s11242-008-9250-8

Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2009). Comparison of analytical and CFD models with regard to micron particle deposition in a human 16-generation tracheobronchial airway model. JOURNAL OF AEROSOL SCIENCE, 40(1), 16–28. https://doi.org/10.1016/j.jaerosci.2008.08.003

Ramasubramanian, M. K., & Alexander, S. P. (2009). An integrated fiberoptic-microfluidic device for agglutination detection and blood typing. BIOMEDICAL MICRODEVICES, 11(1), 217–229. https://doi.org/10.1007/s10544-008-9227-y

Jaganathan, S., Tafreshi, H. V., Shim, E., & Pourdeyhimi, B. (2009). A study on compression-induced morphological changes of nonwoven fibrous materials. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 337(1-3), 173–179. https://doi.org/10.1016/j.colsurfa.2008.12.019

Rabiei, A., & Vendra, L. J. (2009). A comparison of composite metal foam's properties and other comparable metal foams. MATERIALS LETTERS, 63(5), 533–536. https://doi.org/10.1016/j.matlet.2008.11.002

Avramenko, A. A., & Kuznetsov, A. V. (2009). Start-up flow in a channel or pipe occupied by a fluid-saturated porous mediaum. Journal of Porous Media, 12(4), 361–367. https://doi.org/10.1615/jpormedia.v12.i4.60

Wu, F., Zheng, Q., & Lin, Z. (2009). Disturbance attenuation by output feedback for linear systems subject to actuator saturation. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 19(2), 168–184. https://doi.org/10.1002/rnc.1306

Richards, A. L., Cook, R. C., Bolotin, G., & Buckner, G. D. (2009). A Dynamic Heart System to Facilitate the Development of Mitral Valve Repair Techniques. ANNALS OF BIOMEDICAL ENGINEERING, 37(4), 651–660. https://doi.org/10.1007/s10439-009-9653-x

Basciano, C. A., & Kleinstreuer, C. (2009). Invariant-Based Anisotropic Constitutive Models of the Healthy and Aneurysmal Abdominal Aortic Wall. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 131(2). https://doi.org/10.1115/1.3005341

Kleinstreuer, C., & Zhang, Z. (2009). An Adjustable Triple-Bifurcation Unit Model for Air-Particle Flow Simulations in Human Tracheobronchial Airways. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 131(2). https://doi.org/10.1115/1.3005339

Rezvanian, O., & Zikry, M. (2009). Inelastic contact behavior of crystalline asperities in rf MEMS devices. Journal of Engineering Materials and Technology, 131(1), 0110021–01100210. https://doi.org/10.1115/1.3026545

Brown, C., Rezvanian, O., Zikry, M. A., & Krim, J. (2009). Temperature dependence of asperity contact and contact resistance in gold RF MEMS switches. Journal of Micromechanics and Microengineering, 19(2), 025006. https://doi.org/10.1088/0960-1317/19/2/025006

Morton, J., & Silverberg, L. (2009). Fourier series of half-range functions by smooth extension. APPLIED MATHEMATICAL MODELLING, 33(2), 812–821. https://doi.org/10.1016/j.apm.2007.12.009

Luo, H., Baum, J. D., & Loehner, R. (2009). A hybrid building-block and gridless method for compressible flows. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 59(4), 459–474. https://doi.org/10.1002/fld.1827