Mechanical & Aerospace Engineering - 2004

Ashmawi, W. M., Zikry, M., Wang, K., & Reeber, R. R. (2004). Modeling of residual stresses for thermally strained GaN/Al2O3 heterostructures. Journal of Crystal Growth, 266(4), 415–422. https://doi.org/10.1016/j.jcrysgro.2004.02.105

Bakkal, M., Shih, A. J., & Scattergood, R. O. (2004). Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass. International Journal of Machine Tools & Manufacture, 44(9), 915–925. https://doi.org/10.1016/j.ijmachtools.2004.02.002

Balkey, M. M., Day, R. D., Batha, S. H., Elliot, N. E., Pierce, T., Sandoval, D. L., … Sohn, A. (2004). Production and metrology of cylindrical inertial confinement fusion targets with sinusoidal perturbations. Fusion Science and Technology, 45(2), 107–112. https://doi.org/10.13182/FST04-A435

Baucom, J. N., & Zikry, M. (2004). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation (vol 37, pg 1651, 2003). Journal of Composite Materials, Vol. 38, p. 535. https://doi.org/10.1177/0021998303035178

Farrell, M. V., & Ma, N. (2004). Macrosegregation during alloyed semiconductor crystal growth in strong axial and transverse magnetic fields. International Journal of Heat and Mass Transfer, 47(14-16), 3047–3055. https://doi.org/10.1016/j.ijheatmasstransfer.2004.02.021

Geng, P., & Kuznetsov, A. V. (2004). Effect of small solid particles on the development of bioconvection plumes. International Communications in Heat and Mass Transfer, 31(5), 629–638. https://doi.org/10.1016/S0735-1933(04)00050-8

Kuznetsov, A. V. (2004). Effect of turbulence on forced convection in a composite tube partly filled with a porous medium. Journal of Porous Media, 7(1), 59–64. https://doi.org/10.1615/JPorMedia.v7.i1.60

Kuznetsov, A. V., Avramenko, A. A., & Geng, P. (2004). Analytical investigation of a falling plume caused by bioconvection of oxytactic bacteria in a fluid saturated porous medium. International Journal of Engineering Science, 42(06-May), 557–569. https://doi.org/10.1016/j.ijengsci.2003.08.004

Li, S. J., Suzuki, Y., & Noori, M. (2004). Identification of hysteretic systems with slip using bootstrap filter. Mechanical Systems and Signal Processing, 18(4), 781–795. https://doi.org/10.1016/j.ymssp.2003.08.001

Li, S. J., Suzuki, Y., & Noori, M. (2004). Improvement of parameter estimation for non-linear hysteretic systems with slip by a fast Bayesian bootstrap filter. International Journal of Non-Linear Mechanics, 39(9), 1435–1445. https://doi.org/10.1016/j.ijnonlinmec.2004.02.005

Manning, M. L., & Chokani, N. (2004). Computational evaluation of quiet tunnel hypersonic boundary-layer stability experiments. Journal of Spacecraft and Rockets, 41(3), 406–415. https://doi.org/10.2514/1.10698

Nield, D. A., Kuznetsov, A. V., & Avramenko, A. A. (2004). The  onset of bioconvection in a horizontal porous-medium layer. Transport in Porous Media, 54(3), 335–344. https://doi.org/10.1023/B:TIPM.0000003662.31212.5b

Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2004). Thermally developing forced convection in a porous medium: Parallel-plate channel or circular tube with isothermal walls. Journal of Porous Media, 7(1), 19–27. https://doi.org/10.1615/JPorMedia.v7.i1.30

Shi, H., Kleinstreuer, C., Zhang, Z., & Kim, C. S. (2004). Nanoparticle transport and deposition in bifurcating tubes with different inlet conditions. Physics of Fluids (Woodbury, N.Y.), 16(7), 2199–2213. https://doi.org/10.1063/1.1724830

Shih, A. J., Lewis, M. A., & Strenkowski, J. S. (2004). End milling of elastomers - Fixture design and tool effectiveness for material removal. Journal of Manufacturing Science and Engineering, 126(1), 115–123. https://doi.org/10.1115/1.1616951

Shih, A. J., Luo, J., Lewis, M. A., & Strenkowski, J. S. (2004). Chip morphology and forces in end milling of elastomers. Journal of Manufacturing Science and Engineering, 126(1), 124–130. https://doi.org/10.1115/1.1633276

Tu, J. F., Corless, M., & Jeppsson, J. (2004). Robust control of high speed end milling with unknown process parameter and CNC delay. Journal of Aerospace Engineering, 17(1), 09-. https://doi.org/10.1061/(asce)0893-1321(2004)17:1(1)

Wan, Q., & Kuznetsov, A. V. (2004). Investigation of the acoustic streaming in a rectangular cavity induced by the vibration of its lid. International Communications in Heat and Mass Transfer, 31(4), 467–476. https://doi.org/10.1016/S0735-1933(04)00028-4

Wu, F., & Lu, B. (2004). Anti-windup control design for exponentially unstable LTI systems with actuator saturation. Systems and Control Letters, 52(04-Mar), 305–322. https://doi.org/10.1016/j.sysconle.2004.02.007

Zhang, P., Stevie, F., Vanfleet, R., Neelakantan, R., Klimov, M., Zhou, D., & Chow, L. (2004). Diffusion profiles of high dosage Cr and V ions implanted into silicon. Journal of Applied Physics, 96(2), 1053–1058. https://doi.org/10.1063/1.1756221