Mechanical & Aerospace Engineering - 2006

Shi, J., Zikry, M., & Hatem, T. M. (2006). Inelastic behavior and grain-boundary effects in polycrystalline materials. Materials Research Society Symposium Proceedings, 978, 333–338. https://doi.org/10.1557/proc-978-0978-gg12-07-ee08-07

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact using fiber bragg grating sensors. Proceedings of SPIE - The International Society for Optical Engineering, 6174 II. https://doi.org/10.1117/12.657989

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural behavior and failure of FCC crystalline aggregates. Materials Research Society Symposium Proceedings, 976, 78–83. https://doi.org/10.1557/proc-976-0976-ee02-02

Zhao, W., Duscher, G., Zikry, M. A., & Rozgonyi, G. (2006). Local strain characterization on strained-Si/SiGe heterostructures with convergent beam electron diffraction and finite element simulation. ECS Transactions, 3(7), 333–338. https://doi.org/10.1149/1.2355831

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact. American Society of Mechanical Engineers, Materials Division (Publication) MD. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84920632313&partnerID=MN8TOARS

Pearson, J. D., Zikry, M. A., & Rezvanian, O. (2006). Computational modeling and design of adaptive thin-film composite coatings. Materials Research Society Symposium Proceedings, 977, 85–90. https://doi.org/10.1557/proc-977-0977-ff08-10

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006, May 8). Nanoparticle Filtration by Virtual Nonwoven Media. Presented at the American Filtration & Separations Society, Chicago, Illinois.

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Predicting Inlet Roundness of Hydroentangling Nozzles Using CFD Simulations. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.

Zobel, S., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Permeability of Highly Dense Nonwoven Fabrics. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.

Anantharamaiah, N., Roempert, K., Tafreshi, H. V., & Pourdeyhimi, B. (2006). The Role of Waterjet Curtain in Modifying the Jet Streaks in Hydroentangling. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.

Anantharamaiah, N., Roempert, K., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Hydroentangling - A Path to Technical Nonwovens. TechTextil. Presented at the TechTextil, Atlanta, Georgia.

Vahedi Tafreshi, H., Piseri, P., Benedek, G., & Milani, P. (2006). The role of gas dynamics in operation conditions of a puised microplasma cluster source for nanostructured thin films deposition. Journal of Nanoscience and Nanotechnology, 6(4), 1140–1149. https://doi.org/10.1166/jnn.2006.139

Latifi, M., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2006). Fiber dispersion in wet-lay mixing tanks. International Nonwovens Technical Conference, INTC 2006, 384–389. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-36049022222&partnerID=MN8TOARS

Wang, Q., Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2006). Approaches for predicting collation efficiency of fibrous filters. Journal of Textile and Apparel, Technology and Management, 5(2). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33749549286&partnerID=MN8TOARS

Ngaile, G., Stark, D., & Cochran, J. (2006). Development of Polymeric Based Lubricant for Cold Forging Processes. Transaction of the North American Manufacturing Research Institution of SME, 34, 563–570.

Kota, A. K., Anand, G., Ramakrishnan, S., Regel, L. L., & Wilcox, W. R. (2006). Influence of oxygen, hydrogen, helium, argon and vacuum on the surface behavior of molten InSb, other semiconductors, and metals on silica. Journal of Crystal Growth, 290(2), 319–333. https://doi.org/10.1016/j.jcrysgro.2006.01.044

Eischen, J. W. (2006). A Study of the Relationship Between Buckling and Wrinkling of Membranes. Proceedings of the Ninth Pan American Congress of Applied Mechanics. Presented at the Ninth Pan American Congress of Applied Mechanics, Merida, Yucatan, Mexico.

Xu, C., & Shin, Y. C. (2006). A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis. Presented at the 3rd International Conference on Cybernetics and Information Technologies Systems and Applications, Orlando, FL.

Xu, C., & Shin, Y. C. (2006). Adaptive Control of Cutting Force for End Milling Processes with System Variation using Self-tuning Fuzzy Technique. Presented at the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL.

Reyhanoglu, M., & Bommer, A. (2006). Tracking Control of an Underactuated Autonomous Surface Vessel Using Switched Feedback. Proceedings of IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. Presented at the IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics, Paris, France. https://doi.org/10.1109/iecon.2006.347539

O’Connor, B., An, K. H., Pipe, K. P., Zhao, Y., & Shtein, M. (2006). Enhanced optical field intensity distribution in organic photovoltaic devices using external coatings. Applied Physics Letters, 89(23), 233502. https://doi.org/10.1063/1.2399937

Fang, T., & Lee, C.-F. F. (2006). Exact solutions of incompressible Couette flow with porous walls for slightly rarefied gases. Heat and Mass Transfer/Waerme- Und Stoffuebertragung, 42(3), 255–262. https://doi.org/10.1007/s00231-005-0009-2

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2006). Combustion and soot visualization of Low Temperature Combustion within an HSDI diesel engine using multiple injection strategy. SAE Technical Papers. https://doi.org/10.4271/2006-01-0078

Wang, R. C., Fang, T., & Lee, C.-F. F. (2006). Comparisons of computed and measured results for a HSDI diesel engine operating under HCCI mode. SAE Technical Papers. https://doi.org/10.4271/2006-01-1519

Zhu, Y., Corigliano, A., & Espinosa, H. D. (2006). A thermal actuator for nanoscale in situ microscopy testing: design and characterization. Journal of Micromechanics and Microengineering, 16(2), 242–253. https://doi.org/10.1088/0960-1317/16/2/008

Holzbaur, K. R. S., Delp, S. L., & Murray, W. M. (2006). Moment-generating capacity of upper limb muscles. Journal of Biomechanics, 39, S85. https://doi.org/10.1016/S0021-9290(06)83233-1

Holzbaur, K. R. S., Gold, G. E., Johanson, M. E., & Murray, W. M. (2006). MRI-based estimation of muscle volume and length following tendon transfer surgery. Journal of Biomechanics, 39, S84. https://doi.org/10.1016/S0021-9290(06)83227-6

Reyhanoglu, M., & Geluk, T. (2006). Switched Feedback Tracking Control of a Nonholonomic Mobile Robot. IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. Presented at the IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. https://doi.org/10.1109/iecon.2006.347507

Reyhanoglu, M., & van de Loo, J. (2006). State Feedback Tracking of a Nonholonomic Control Moment Gyroscope. Proceedings of the 45th IEEE Conference on Decision and Control. Presented at the Proceedings of the 45th IEEE Conference on Decision and Control. https://doi.org/10.1109/cdc.2006.377590

Reyhanoglu, M., & De Loo, J. (2006). Rest-to-rest Maneuvering of a Nonholonomic Control Moment Gyroscope. 2006 IEEE International Symposium on Industrial Electronics. Presented at the 2006 IEEE International Symposium on Industrial Electronics. https://doi.org/10.1109/isie.2006.295585

Vermillion, C., Sun, J., Butts, K., & Hall, A. (2006). Modeling and Analysis of a Thermal Management System for Engine Calibration. 2006 IEEE International Conference on Control Applications. Presented at the 2006 IEEE International Conference on Control Applications. https://doi.org/10.1109/cca.2006.286181

Muller, M., Moilanen, P., Bosisio, M., Mitton, D., & Talmant, M. (2006). Comparison of ultrasonic axial transmission and pQCT parameters to bone mechanical properties in vitro. Journal of Biomechanics, 39, S452. https://doi.org/10.1016/S0021-9290(06)84849-9

Muller, M., D'Hanens, A., Mitton, D., Talmant, M., Johnson, P., & Laugier, P. (2006). Fatigue damage in cortical bone detected using nonlinear ultrasound. Journal of Biomechanics, 39, S8. https://doi.org/10.1016/S0021-9290(06)82896-4

Muller, M., Tencate, J. A., Darling, T. W., Sutin, A., Guyer, R. A., Talmant, M., … Johnson, P. A. (2006). Bone micro-damage assessment using non-linear resonant ultrasound spectroscopy (NRUS) techniques: A feasibility study. Ultrasonics, 44, e245–e249. https://doi.org/10.1016/j.ultras.2006.06.043

An, K. H., O’Connor, B., Pipe, K. P., Zhao, Y., & Shtein, M. (2006). Organic light-emitting device on a scanning probe cantilever. Applied Physics Letters, 89(11), 111117. https://doi.org/10.1063/1.2353816

Fang, T., Guo, F., & Lee, C.-fon F. (2006). A note on the extended Blasius equation. Applied Mathematics Letters, 19(7), 613–617. https://doi.org/10.1016/j.aml.2005.08.010

Fang, T., Guo, F., & Lee, C.-fon F. (2006). A new iteration method with cubic convergence to solve nonlinear algebraic equations. Applied Mathematics and Computation, 175(2), 1147–1155. https://doi.org/10.1016/j.amc.2005.08.020

Li, Z., & Kleinstreuer, C. (2006). Effects of blood flow and vessel geometry on wall stress and rupture risk of abdominal aortic aneurysms. Journal of Medical Engineering & Technology, 30(5), 283–297. https://doi.org/10.1080/03091900500217406

Kowalski, M. P., Heilmann, R. K., Schattenburg, M. L., Chang, C.-H., Berendse, F. B., & Hunter, W. R. (2006). Near-normal-incidence extreme-ultraviolet efficiency of a flat crystalline anisotropically etched blazed grating. Applied Optics, 45(8), 1676. https://doi.org/10.1364/ao.45.001676

Seely, J. F., Goray, L. I., Kjornrattanawanich, B., Laming, J. M., Holland, G. E., Flanagan, K. A., … Rasmussen, A. P. (2006). Efficiency of a grazing-incidence off-plane grating in the soft-x-ray region. Applied Optics, 45(8), 1680. https://doi.org/10.1364/ao.45.001680

Chang, C.-H., Akilian, M., & Schattenburg, M. L. (2006). Describing isotropic and anisotropic out-of-plane deformations in thin cubic materials by use of Zernike polynomials. Applied Optics, 45(3), 432. https://doi.org/10.1364/ao.45.000432

Xu, C., & Shin, Y. C. (2006). An adaptive fuzzy controller for constant cutting force in end-milling processes. American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC. https://doi.org/10.1115/IMECE2006-13758

Luo, H., Baum, J. D., & Lohner, R. (2006). A p-multigrid discontinuous Galerkin method for the Euler equations on unstructured grids. JOURNAL OF COMPUTATIONAL PHYSICS, 211(2), 767–783. https://doi.org/10.1016/j.jcp.2005.06.019

Luo, H., Baum, J. D., & Lohner, R. (2006). A hybrid Cartesian grid and gridless method for compressible flows. JOURNAL OF COMPUTATIONAL PHYSICS, 214(2), 618–632. https://doi.org/10.1016/j.jcp.2005.10.002

Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2006, October). Reply on the comments on "Initiation of pulsed corona discharge under Supercritical conditions" by C. H. Zhang, J. M. K. MacAlpine, and H. Akiyama. IEEE TRANSACTIONS ON PLASMA SCIENCE, Vol. 34, pp. 2467–2468. https://doi.org/10.1109/tps.2006.883368

Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2006). Methanol and dimethyl sulfide removal by pulsed corona part I: Experiment. PLASMA CHEMISTRY AND PLASMA PROCESSING, 26(6), 527–542. https://doi.org/10.1007/s11090-006-9011-9

Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2006). Flame synthesis of molybdenum oxide whiskers. CHEMICAL PHYSICS LETTERS, 422(1-3), 72–77. https://doi.org/10.1016/j.cplett.2006.02.040

Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2006). Flame nanotube synthesis in moderate electric fields: From alignment and growth rate effects to structural variations and branching phenomena. CARBON, 44(15), 3308–3314. https://doi.org/10.1016/j.carbon.2006.06.025

David Merryman, W., Shadow Huang, H.-Y., Schoen, F. J., & Sacks, M. S. (2006). The effects of cellular contraction on aortic valve leaflet flexural stiffness. Journal of Biomechanics, 39(1), 88–96. https://doi.org/10.1016/j.jbiomech.2004.11.008

Huang, H.-Y. S., & Sacks, M. S. (2006). Geometric changes in heart valve interstitial cell nuclei with transvalvular pressure. 5th World Congress of Biomechanics, Munich, Germany, July 29-August 4, 2006, 5640.

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Numerical simulation of the formation of constricted waterjets in hydroentangling nozzles - Effects of nozzle geometry. CHEMICAL ENGINEERING RESEARCH & DESIGN, 84(A3), 231–238. https://doi.org/10.1205/cherd.05077

Inaudi, D., Ecke, W., Culshaw, B., Peters, K. J., & Udd, E. (2006). Smart structures and materials 2006: Smart sensor monitoring systems and applications (SPIE; 6167). Bellingham, Wash.: SPIE.

Avramenko, A. A., & Kuznetsov, A. V. (2006). The onset of convection in a suspension of gyrotactic microorganisms in superimposed fluid and porous layers: Effect of vertical throughflow. TRANSPORT IN POROUS MEDIA, 65(2), 159–176. https://doi.org/10.1007/s11242-005-6086-3

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A note on permeability simulation of multifilament woven fabrics. CHEMICAL ENGINEERING SCIENCE, 61(24), 8085–8088. https://doi.org/10.1016/j.ces.2006.09.043

Cengel, Y. A., & Boles, M. A. (2006). Thermodynamics: an engineering approach. (5th ed.). Boston: McGraw-Hill Higher Education.

Wang, L., Fritts, D. C., & Tolson, R. H. (2006). Nonmigrating tides inferred from the Mars Odyssey and Mars Global Surveyor aerobraking data. Geophysical Research Letters, 33(23).

Kuznetsov, A. V. (2006). Thermo-bio-convection in porous media. JOURNAL OF POROUS MEDIA, 9(6), 581–589. https://doi.org/10.1615/JPorMedia.v9.i6.60

Kuznetsov, A. V., & Nield, D. A. (2006). Thermally developing forced convection in a bidisperse porous medium. Journal of Porous Media, 9(5), 393–402. https://doi.org/10.1615/jpormedia.v9.i5.10

Lu, B., & Wu, F. (2006). Probabilistic robust linear parameter-varying control of an F-16 aircraft. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 29(6), 1454–1460. https://doi.org/10.2514/1.22495

Wu, C., Mosher, B. P., & Zeng, T. (2006). One-step green route to narrowly dispersed copper nanocrystals. JOURNAL OF NANOPARTICLE RESEARCH, 8(6), 965–969. https://doi.org/10.1007/s11051-005-9065-2

Ranganath, B., & Echekki, T. (2006). On the role of heat and mass transport during the mutual annihilation of two premixed propane-air flames. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(25-26), 5075–5080. https://doi.org/10.1016/j.ijheatmasstransfer.2006.05.029

Kuznetsov, A. V. (2006). Linear stability analysis of the effect of vertical vibration on bioconvection in a horizontal porous layer of finite depth. JOURNAL OF POROUS MEDIA, 9(6), 597–608. https://doi.org/10.1615/JPorMedia.v9.i6.80

Wegner, K., Piseri, P., Tafreshi, H. V., & Milani, P. (2006). [Review of Cluster beam deposition: a tool for nanoscale science and technology]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 39(22), R439–R459. https://doi.org/10.1088/0022-3727/39/22/r02

Kuznetsov, A. V., & Nield, D. A. (2006). Boundary layer treatment of forced convection over a wedge with an attached porous substrate. Journal of Porous Media, 9(7), 683–694. https://doi.org/10.1615/jpormedia.v9.i7.70

Fritts, D. C., Wang, L., & Tolson, R. H. (2006). Mean and gravity wave structures and variability in the Mars upper atmosphere inferred from Mars Global Surveyor and Mars Odyssey aerobraking densities. Journal of Geophysical Research. Space Physics, 111(A12), A12304.

Pandurangan, P., & Buckner, G. D. (2006). Vibration analysis for damage detection in metal-to-metal adhesive joints. EXPERIMENTAL MECHANICS, 46(5), 601–607. https://doi.org/10.1007/s11340-006-8736-y

Narayan, R. J., Hobbs, L. W., Jin, C., & Rabiei, A. (2006). The use of functionally gradient materials in medicine. JOM, 58(7), 52–56. https://doi.org/10.1007/s11837-006-0142-5

Nield, D. A., & Kuznetsov, A. V. (2006). The onset of convection in a bidisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(17-18), 3068–3074. https://doi.org/10.1016/j.ijheatmasstransfer.2006.02.008

Ma, N., & Walker, J. S. (2006). Strong-field electromagnetic stirring in the vertical gradient freeze process with a submerged heater. JOURNAL OF CRYSTAL GROWTH, 291(1), 249–257. https://doi.org/10.1016/j.jcrysgro.2006.02.041

Wu, C., Mosher, B. P., & Zeng, T. (2006). Rapid synthesis of gold and platinum nanoparticles using metal displacement reduction with sonomechanical assistance. CHEMISTRY OF MATERIALS, 18(13), 2925–2928. https://doi.org/10.1021/cm052400x

Rabiei, A., Vendra, L., Reese, N., Young, N., & Neville, B. P. (2006, September). Processing and characterization of a new composite metal foam. MATERIALS TRANSACTIONS, Vol. 47, pp. 2148–2153. https://doi.org/10.2320/matertrans.47.2148

Wang, X., Ma, N., Bliss, D. F., Iseler, G. W., & Becla, P. (2006). Parametric study of modified vertical bridgman growth in a rotating magnetic field. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 20(3), 384–388. https://doi.org/10.2514/1.19572

Ranganath, B., & Echekki, T. (2006). One-Dimensional Turbulence-based closure for turbulent non-premixed flames. PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 6(7), 409–418. https://doi.org/10.1504/PCFD.2006.010966

Kameda, T., Zikry, M. A., & Rajendran, A. M. (2006). Modeling of grain-boundary effects and intergranular and transgranular failure in polycrystalline intermetallics. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(7), 2107–2115. https://doi.org/10.1007/BF02586131

Lee, J. W., Thomas, B., & Rabiei, A. (2006). Microstructural study of titanium-palladium-nickel base thin film shape memory alloys. THIN SOLID FILMS, 500(1-2), 309–315. https://doi.org/10.1016/j.tsf.2005.11.027

Shi, H., Kleinstreuer, C., & Zhang, Z. (2006). Laminar airflow and nanoparticle or vapor deposition in a human nasal cavity model. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(5), 697–706. https://doi.org/10.1115/1.2244574

Chitrphiromsri, P., Kuznetsov, A. V., Song, G., & Barker, R. L. (2006). Investigation of feasibility of developing intelligent firefighter-protective garments based on the utilization of a water-injection system. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 49(5), 427–450. https://doi.org/10.1080/10407780500359869

Dow, T. A. (2006). Friction clutches. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.

Dow, T. A. (2006). Friction brakes. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill.

Li, Z., & Kleinstreuer, C. (2006). Computational analysis of type II endoleaks in a stented abdominal aortic aneurysm model. JOURNAL OF BIOMECHANICS, 39(14), 2573–2582. https://doi.org/10.1016/j.jbiomech.2005.09.002

Tran, C. M., & Southward, S. C. (2006). A sensor placement strategy for the hybrid adaptive feedforward observer. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 128(2), 449–452. https://doi.org/10.1115/1.2196421

Xiao, X., Edwards, JR, Hassan, H. A., & Cutler, A. D. (2006, March). Variable turbulent Schmidt-number formulation for scramjet applications. AIAA JOURNAL, Vol. 44, pp. 593–599. https://doi.org/10.2514/1.15450

Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052

Baldwin, E., Thomas, B., Lee, J. W., & Rabiei, A. (2006). Residual stresses in TiPdNi base thin film shape memory alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 434(1-2), 124–130. https://doi.org/10.1016/j.msea.2006.06.123

Kuznetsov, A. V., & Xiang, P. (2006). Numerical investigation of thinning of the intercellular bridge during cell cytokinesis. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 33(9), 1071–1078. https://doi.org/10.1016/j.icheatmasstransfer.2006.05.005

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural modeling of grain subdivision and large strain inhomogeneous deformation modes in f.c.c. crystalline materials. MECHANICS OF MATERIALS, 38(12), 1159–1169. https://doi.org/10.1016/j.mechmat.2005.12.006

Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Isotonic and hypertonic saline droplet deposition in a human upper airway model. JOURNAL OF AEROSOL MEDICINE-DEPOSITION CLEARANCE AND EFFECTS IN THE LUNG, 19(2), 184–198. https://doi.org/10.1089/jam.2006.19.184

Kuznetsov, A. V., & Nield, D. A. (2006). Forced convection with laminar pulsating flow in a saturated porous channel or tube. TRANSPORT IN POROUS MEDIA, 65(3), 505–523. https://doi.org/10.1007/s11242-006-6791-6

Prabhugoud, M., & Peters, K. (2006). Finite element model for embedded fiber Bragg grating sensor. SMART MATERIALS AND STRUCTURES, 15(2), 550–562. https://doi.org/10.1088/0964-1726/15/2/038

Buckner, G. D., Choi, H., & Gibson, N. S. (2006). Estimating model uncertainty using confidence interval networks: Applications to robust control. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 128(3), 626–635. https://doi.org/10.1115/1.2199855

Ma, N., & Walker, J. S. (2006). Electromagnetic stirring in crystal growth processes. Fluid Dynamics & Materials Processing : FDMP, 2(2), 119–125.

Wang, X., Ma, N., Bliss, D. F., Iseler, G. W., & Becla, P. (2006, January 25). Comparing modified vertical gradient freezing with rotating magnetic fields or with steady magnetic and electric fields. JOURNAL OF CRYSTAL GROWTH, Vol. 287, pp. 270–274. https://doi.org/10.1016/j.jcrysgro.2005.11.036

Kuznetsov, A. V. (2006). The onset of thermo-bioconvection in a shallow fluid saturated porous layer heated from below in a suspension of oxytactic microorganisms. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 25(2), 223–233. https://doi.org/10.1016/j.euromechflu.2005.06.003

Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2006). Solute segregation during modified vertical gradient freezing of alloyed compound semiconductor crystals with magnetic and electric fields. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(19-20), 3429–3438. https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.008

Altan, T., Jain, N. T., Shi, XX, Ngaile, G., Pax, B., Harman, B., & Homan, G. (2006). Progressive die sequence design for deep drawing round cups using finite element analysis. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 366–369. https://doi.org/10.1115/1.2039942

Mosher, B. P., Wu, C., Sun, T., & Zeng, T. (2006). Particle-reinforced water-based organic-inorganic nanocomposite coatings for tailored applications. JOURNAL OF NON-CRYSTALLINE SOLIDS, 352(30-31), 3295–3301. https://doi.org/10.1016/j.jnoncrysol.2006.05.026

Star, A. M., Edwards, J. R., Lin, K.-C., Cox-Stouffer, S., & Jackson, T. A. (2006). Numerical simulation of injection of supercritical ethylene into nitrogen. JOURNAL OF PROPULSION AND POWER, Vol. 22, pp. 809–819. https://doi.org/10.2514/1.16621

Baucom, J. N., Zikry, M. A., & Rajendran, A. M. (2006). Low-velocity impact damage accumulation in woven S2-glass composite systems. COMPOSITES SCIENCE AND TECHNOLOGY, 66(10), 1229–1238. https://doi.org/10.1016/j.compscitech.2005.11.005

Ramasubramanian, M. K., Madanshetty, S. I., & Suwan-Acksorn, P. (2006). Characterization of focused high frequency ultrasonic, removal of thermally fused toner from paper surfaces - an experimental study. Appita Journal, 59(4), 306-.

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A study on flow through hydroentangling nozzles and their degradation. CHEMICAL ENGINEERING SCIENCE, 61(14), 4582–4594. https://doi.org/10.1016/j.ces.2006.01.038

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A case study of simulating submicron aerosol filtration via lightweight spun-bonded filter media. CHEMICAL ENGINEERING SCIENCE, 61(15), 4871–4883. https://doi.org/10.1016/j.ces.2006.03.039

Terry, S. D., & Lyons, K. M. (2006). Turbulent lifted flames in the hysteresis regime and the effects of coflow. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 128(4), 319–324. https://doi.org/10.1115/1.2358147

Nield, D. A., & Kuznetsov, A. V. (2006). The onset of bio-thermal convection in a suspension of gyrotactic microorganisms in a fluid layer: Oscillatory convection. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 45(10), 990–997. https://doi.org/10.1016/j.ijthermalsci.2006.01.007

Mukherjee, R., & Gopalarathnam, A. (2006). Poststall Prediction of Multiple-Lifting-Surface Configurations Using a Decambering Approach. Journal of Aircraft, 43(3), 660–668. https://doi.org/10.2514/1.15149

Becker, S. M., & Kuznetsov, A. V. (2006). Numerical modeling of in vivo plate electroporation thermal dose assessment. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 76–84. https://doi.org/10.1115/1.2132375

Sweet, A. L., & Tu, J. F. (2006). Evaluating tolerances and process capability when using truncated probability density functions. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 44(17), 3493–3508. https://doi.org/10.1080/00207540500521576

Ngaile, G., Gariety, M., & Altan, T. (2006). Enhancing tribological conditions in tube hydroforming by using textured tubes. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 128(3), 674–676. https://doi.org/10.1115/1.2197849

Li, Z., & Kleinstreuer, C. (2006). Effects of major endoleaks on a stented abdominal aortic aneurysm. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 59–68. https://doi.org/10.1115/1.2132376

Geng, P., & Kuznetsov, A. V. (2006). Direct numerical simulation of settling of a large solid particle during bioconvection. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 51(5), 511–530. https://doi.org/10.1002/fld.1125

Kolera-Gokula, H., & Echekki, T. (2006). Direct numerical simulation of premixed flame kernel-vortex interactions in hydrogen-air mixtures. COMBUSTION AND FLAME, 146(1-2), 155–167. https://doi.org/10.1016/j.combustflame.2006.04.002

Nojavan, S., & Yuan, F.-G. (2006). Damage imaging of reinforced concrete structures using electromagnetic migration algorithm. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 43(18-19), 5886–5908. https://doi.org/10.1016/j.ijsolstr.2005.08.017

Tafreshi, H. V., Ercan, E., & Pourdeyhimi, B. (2006). Calculating mass transfer from vertical wet fabrics using a free convection heat transfer correlation. HEAT AND MASS TRANSFER, 42(9), 767–769. https://doi.org/10.1007/s00231-005-0050-1

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A study on hydroentangling waterjets and their impact forces. EXPERIMENTS IN FLUIDS, 41(1), 103–113. https://doi.org/10.1007/s00348-006-0162-5

Yan, J., & Strenkowski, J. S. (2006). A finite element analysis of orthogonal rubber cutting. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 174(1-3), 102–108. https://doi.org/10.1016/j.jmatprotec.2005.02.265

Uner, B., Ramasubramanian, M. K., Zauscher, S., & Kadla, J. F. (2006). Adhesion interactions between poly(vinyl alcohol) and iron-oxide surfaces: The effect of acetylation. JOURNAL OF APPLIED POLYMER SCIENCE, 99(6), 3528–3534. https://doi.org/10.1002/app.22980

Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Water vapor transport and its effects on the deposition of hygroscopic droplets in a human upper airway model. AEROSOL SCIENCE AND TECHNOLOGY, 40(1), 1–16. https://doi.org/10.1080/02786820500461154

Mao, D. M., Edwards, JR, & Harvey, A. (2006). Prediction of foam growth and its nucleation in free and limited expansion. CHEMICAL ENGINEERING SCIENCE, 61(6), 1836–1845. https://doi.org/10.1016/j.ces.2005.07.026

Li, Z., & Kleinstreuer, C. (2006). Analysis of biomechanical factors affecting stent-graft migration in an abdominal aortic aneurysm model. JOURNAL OF BIOMECHANICS, 39(12), 2264–2273. https://doi.org/10.1016/j.jbiomech.2005.07.010

Smith, R. C., Seelecke, S., Dapino, M., & Ounaies, Z. (2006). A unified framework for modeling hysteresis in ferroic materials. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 54(1), 46–85. https://doi.org/10.1016/j.jmps.2005.08.006

Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Transport and uptake of MTBE and ethanol vapors in a human upper airway model. INHALATION TOXICOLOGY, 18(3), 169–184. https://doi.org/10.1080/08958370500434172

Danby, S. J., & Echekki, T. (2006). Proper orthogonal decomposition analysis of autoignition simulation data of nonhomogeneous hydrogen-air mixtures. COMBUSTION AND FLAME, 144(1-2), 126–138. https://doi.org/10.1016/j.combustflame.2005.06.014

Rajendran, A. M., Ashmawi, W. M., & Zikry, M. A. (2006). The modeling of the shock response of powdered ceramic materials. COMPUTATIONAL MECHANICS, 38(1), 1–13. https://doi.org/10.1007/s00466-005-0712-3

Lawrence, B. M., Buckner, G. D., & Mirka, G. A. (2006). An adaptive system identification model of the biomechanical response of the human trunk during sudden loading. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(2), 235–241. https://doi.org/10.1115/1.2165696

Rabiei, A., Thomas, B., Jin, C., Narayan, R., Cuomo, J., Yang, Y., & Ong, J. L. (2006). A study on functionally graded HA coatings processed using ion beam assisted deposition with in situ heat treatment. SURFACE & COATINGS TECHNOLOGY, 200(20-21), 6111–6116. https://doi.org/10.1016/j.surfcoat.2005.09.027

Zeng, T. F. (2006). Thermionic-tunneling multilayer nanostructures for power generation. APPLIED PHYSICS LETTERS, 88(15). https://doi.org/10.1063/1.2192973

Nakkiew, W., Lin, C.-W., & Tu, J. F. (2006). A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 46(7-8), 877–889. https://doi.org/10.1016/j.ijmachtools.2005.04.021

Kuznetsov, A. V. (2006). Investigation of the onset of bioconvection in a suspension of oxytactic microorganisms subjected to high-frequency vertical vibration. THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 20(2), 73–87. https://doi.org/10.1007/s00162-006-0007-0

Lee, K. L., & Soh, A. K. (2006). Effects of electric fatigue on piezoelectric ceramics. In Fracture and strength of solids, proceedings of the Sixth International Conference on Fracture & Strength of Solids (Key engineering materials; 306-308) (Vol. 306-308, pp. 91–96).

Wang, X., & Ma, N. (2006). Bridgman-Stockbarger growth of binary alloyed semiconductor crystals with steady magnetic fields. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 20(2), 313–319. https://doi.org/10.2514/1.15584

Nield, D. A., & Kuznetsov, A. V. (2006). Forced convection with slip-flow in a channel or duct occupied by a hyper-porous medium saturated by a rarefied gas. TRANSPORT IN POROUS MEDIA, 64(2), 161–170. https://doi.org/10.1007/s11242-005-2341-x

Kuznetsov, A. V. (2006). Optimization problems for bioheat equation. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 33(5), 537–543. https://doi.org/10.1016/j.icheatmasstransfer.2006.01.012

Berry, T. L., & Roberts, W. L. (2006). Measurement of smoke point in velocity-matched coflow laminar diffusion flames with pure fuels at elevated pressures. COMBUSTION AND FLAME, 145(3), 571–578. https://doi.org/10.1016/j.combustflame.2005.12.010

Neaves, M. D., & Edwards, JR. (2006). All-speed time-accurate underwater projectile calculations using a preconditioning algorithm. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 128(2), 284–296. https://doi.org/10.1115/1.2169816

Avramenko, A. A., & Kuznetsov, A. V. (2006). Renormalization group model of large-scale turbulence in porous media. TRANSPORT IN POROUS MEDIA, 63(1), 175–193. https://doi.org/10.1007/s11242-005-4425-z

Wu, F., & Dong, K. (2006). Gain-scheduling control of LFT systems using parameter-dependent Lyapunov functions. AUTOMATICA, 42(1), 39–50. https://doi.org/10.1016/j.automatica.2005.08.020