Mechanical and Aerospace Engineering - 2003

Role of baffles on flow fields inside wet-lay mixing tanks and their potential influence on fiber dispersion. (2003). Textile Research Journal. Retrieved from https://publons.com/wos-op/publon/65200206/

Ekkad, S. V., & Nasir, H. (2003). Dimple Enhanced Heat Transfer in High Aspect Ratio Channels. Journal of Enhanced Heat Transfer, 10(4), 395–405. https://doi.org/10.1615/JEnhHeatTransf.v10.i4.40

Nasir, H., Acharya, S., & Ekkad, S. (2003). Improved film cooling from cylindrical angled holes with triangular tabs: Effect of tab orientations. International Journal of Heat and Fluid Flow, 24(5), 657–668. https://doi.org/10.1016/S0142-727X(03)00082-1

Gao, L., Ekkad, S. V., & Bunker, R. S. (2003). Impingement heat transfer under linearly stretched arrays of holes. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 91–100. https://doi.org/10.1115/GT2003-38178

Nasir, H., Ekkad, S. V., Kontrovitz, D. M., Bunker, R. S., & Prakash, C. (2003). Effect of tip gap and squealer geometry on measured heat transfer over a HPT rotor blade tip. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374(2), 11–21. https://doi.org/10.1115/IMECE2003-41294

Saxena, V., Nasir, H., & Ekkad, S. V. (2003). Effect of blade tip geometry on tip flow and heat transfer for a blade in a low speed cascade. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 81–90. https://doi.org/10.1115/GT2003-38176

Nasir, H., Ekkad, S. V., & Acharya, S. (2003). Flat surface film cooling from cylindrical holes with discrete tabs. Journal of Thermophysics and Heat Transfer, 17(3), 304–312. https://doi.org/10.2514/2.6786

Bahei-El-Din, Y. A., Rajendran, A. M., & Zikry, M. A. (2003). A material model for multi-scale analysis of textile composites. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1, 685–690. https://doi.org/10.2514/6.2003-1476

Kiefer, S., Silverberg, L. M., & Gonzalez, M. (2003). A  case study of prototyping methods and design for manufacture: electrostatic window blinds. Journal of Engineering Design, 15(1), 91–106. https://doi.org/10.1080/0954482021000050820

Tafreshi, H. V., Begenir, A., & Pourdeyhimi, B. (2003). The Role of Nozzle Design in Characteristics of the Hydroentangling Waterjets. 16th Annual Conference on Liquid Atomization and Spray Systems (ILASS Americas). Presented at the 16th Annual Conference on Liquid Atomization and Spray Systems (ILASS Americas), Monterey, California.

Begenir, A., Tafreshi, H. V., & Pourdeyhimi, B. (2003). The Role of Nozzle Design in Characteristics of the Hydroentangling Waterjets: Experimental Study. International Nonwovens Technical Conference (INTC 2003). Presented at the International Nonwovens Technical Conference (INTC 2003), Baltimore, Maryland.

Tafreshi, H. V., & Pourdeyhimi, B. (2003). A Study on Cavitation inside Hydroentangling Nozzles. International Nonwovens Technical Conference (INTC 2003). Presented at the International Nonwovens Technical Conference (INTC 2003), Baltimore, Maryland.

Tafreshi, H. V., & Pourdeyhimi, B. (2003). Gas-particle decoupling by nozzle-induced aerodynamic effects. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Reno, Nevada.

Benedek, G., Vahedi-Tafreshi, H., Barborini, E., Piseri, P., Milani, P., Ducati, C., & Robertson, J. (2003). The structure of negatively curved spongy carbon. Diamond and Related Materials, 12(3-7), 768–773. https://doi.org/10.1016/S0925-9635(03)00082-7

Vahedi Tafreshi, H., & Pourdeyhimi, B. (2003). Simulating the flow dynamics in hydroentangling nozzles: Effect of cone angle and nozzle aspect ratio. Textile Research Journal, Vol. 73, pp. 700–704. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0042731538&partnerID=MN8TOARS

Vahedi Tafreshi, H., & Pourdeyhimi, B. (2003). Role of baffles on flow fields inside wet-lay mixing tanks and their pontential influence on fiber dispersion. Textile Research Journal, Vol. 73, pp. 575–582. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0041339609&partnerID=MN8TOARS

Wenning, P. H., Ngaile, G., & Altan, T. (2003). Design of a fastener clinching process using FEM. Transaction of the North American Manufacturing Research Institution of SME, 31, 17–24.

Morrisey, P., Eischen, J. W., & Dow, T. A. (2003). Design and Analysis of Press and Shrink Fit Joints. Proceedings of the American Society for Precision Engineering Conference. Portland, OR.

Mahindrakar, A. D., Banavar, R. N., & Reyhanoglu, M. (2003). Discontinuous feedback control of a 3 link planar PPR underactuated manipulator. Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228). Presented at the 40th Conference on Decision and Control, Orlando, FL. https://doi.org/10.1109/cdc.2001.980626

Reyhanoglu, M. (2003). Feedback control of an underactuated system with two unactuated degrees of freedom. Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228). Presented at the 40th Conference on Decision and Control, Orlando, FL. https://doi.org/10.1109/cdc.2001.980838

Bryson,, A. E., Author, & Reyhanoglu,, M., Reviewer. (2003). Applied Linear Optimal Control: Examples and Algorithms. Applied Mechanics Reviews, 56(4), B55–B56. https://doi.org/10.1115/1.1579457

Fang, T. (2003). New relationships for temperature sensitivity of radiation. International Communications in Heat and Mass Transfer, 30(2), 173–184. https://doi.org/10.1016/S0735-1933(03)00028-9

Fang, T. (2003). Further study on a moving-wall boundary-layer problem with mass transfer. Acta Mechanica, 163(3-4), 183–188. https://doi.org/10.1007/s00707-002-0979-9

Fang, T. (2003). Similarity solutions for a moving-flat plate thermal boundary layer. Acta Mechanica, 163(3-4), 161–172. https://doi.org/10.1007/s00707-003-0004-y

Fang, T. (2003). General discussion on displacement law of radiation. International Communications in Heat and Mass Transfer, 30(5), 737–743. https://doi.org/10.1016/S0735-1933(03)00111-8

Fang, T. (2003). A new approximation method to evaluate thermal contrast. Infrared Physics and Technology, 44(3), 191–198. https://doi.org/10.1016/S1350-4495(02)00210-4

Fang, T. (2003). Further discussion on the optimun temperature of efficiency of production for blackbody radiation. International Communications in Heat and Mass Transfer, 30(1), 47–52. https://doi.org/10.1016/S0735-1933(03)00006-X

Reyhanoglu, M. (2003). Mechatronic control of distributed noise and vibration: A Lyapunov approach. Automatica, 39(9), 1664–1666. https://doi.org/10.1016/s0005-1098(03)00145-6

Luo, H., Baum, J. D., & Löhner, R. (2003). Computation of Compressible Flows using a Two-equation Turbulence Model on Unstructured Grids. International Journal of Computational Fluid Dynamics, 17(1), 87–93. https://doi.org/10.1080/1061856021000034337

Kim, S. Y., & Kuznetsov, A. V. (2003). OPTIMIZATION OF PIN-FIN HEAT SINKS USING ANISOTROPIC LOCAL THERMAL NONEQUILIBRIUM POROUS MODEL IN A JET IMPINGING CHANNEL. Numerical Heat Transfer, Part A: Applications, 44(8), 771–787. https://doi.org/10.1080/716100528

Watson, K. A., Lyons, K. M., Donbar, J. M., & Carter, C. D. (2003). On scalar dissipation and partially premixed flame propagation. Combustion Science and Technology, 175(4), 649–664. https://doi.org/10.1080/00102200302393

Chang, C.-H., Heilmann, R. K., Fleming, R. C., Carter, J., Murphy, E., Schattenburg, M. L., … Voisin, R. (2003). Fabrication of sawtooth diffraction gratings using nanoimprint lithography. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21(6), 2755. https://doi.org/10.1116/1.1627814

Konkola, P. T., Chen, C. G., Heilmann, R. K., Joo, C., Montoya, J. C., Chang, C.-H., & Schattenburg, M. L. (2003). Nanometer-level repeatable metrology using the Nanoruler. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 21(6), 3097. https://doi.org/10.1116/1.1610003

Sharov, D., Luo, H., Baum, J. D., & Lohner, R. (2003). Unstructured Navier-Stokes grid generation at comers and ridges. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 43(6-7), 717–728. https://doi.org/10.1002/fld.615

Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2003). Carbon nanostructures in opposed-flow methane oxy-flames. COMBUSTION SCIENCE AND TECHNOLOGY, 175(12), 2217–2236. https://doi.org/10.1080/714923286

Saveliev, A. V., Merchan-Merchan, W., & Kennedy, L. A. (2003). Metal catalyzed synthesis of carbon nanostructures in an opposed flow methane oxygen flame. COMBUSTION AND FLAME, 135(1-2), 27–33. https://doi.org/10.1016/s0010-2180(03)00142-1

Contarin, F., Saveliev, A. V., Fridman, A. A., & Kennedy, L. A. (2003). A reciprocal flow filtration combustor with embedded heat exchangers: numerical study. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 46(6), 949–961. https://doi.org/10.1016/s0017-9310(02)00371-x

Cho, H., & Ngaile, G. (2003). Simultaneous determination of flow stress and interface friction by finite element based inverse analysis technique. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 52(1), 221–224. https://doi.org/10.1016/s0007-8506(07)60570-8

Sun, W., Huang, H.-Y. S., Argento, M. S., & Sacks, M. S. (2003). Finite Element Implementation of a Structural Constitutive Model for Planar Collagenous Tissues. Proceedings of the Second MIT Conference on Computational Solid and Fluid Mechanics, 210. Cambridge, MA: Amsterdam: Elsevier Science,

Zhang, Z., & Kleinstreuer, C. (2003, November). Computational thermodynamics analysis of vaporizing fuel droplets in the human upper airways. JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, Vol. 46, pp. 563–571. https://doi.org/10.1299/jsmeb.46.563

Nield, D. A., & Kuznetsov, A. V. (2003). Boundary-layer analysis of forced convection with a plate and porous substrate. ACTA MECHANICA, 166(1-4), 141–148. https://doi.org/10.1007/s00707-003-0050-5

Baucom, J. N., & Zikry, M. A. (2003). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation. JOURNAL OF COMPOSITE MATERIALS, 37(18), 1651–1674. https://doi.org/10.1177/0021998303035178

Prabhugoud, M., & Peters, K. (2003). Efficient simulation of Bragg grating sensors for implementation to damage identification in composites. SMART MATERIALS AND STRUCTURES, 12(6), 914–924. https://doi.org/10.1088/0964-1726/12/6/008

Wu, T., Ro, P. I., Kingon, A. I., & Mulling, J. F. (2003). Piezoelectric resonating structures for microelectronic cooling. Smart Materials & Structures, 12(2), 181–187. https://doi.org/10.1088/0964-1726/12/2/304

Zhang, Z., & Kleinstreuer, C. (2003). Low-Reynolds-number turbulent flows in locally constricted conduits: A comparison study. AIAA JOURNAL, 41(5), 831–840. https://doi.org/10.2514/2.2044

Xiao, X. D., Edwards, JR, Hassan, H. A., & Baurle, R. A. (2003, August). Inflow boundary conditions for hybrid large eddy/Reynolds averaged Navier-Stokes simulations. AIAA JOURNAL, Vol. 41, pp. 1481–1489. https://doi.org/10.2514/2.2130

Nield, D. A., & Kuznetsov, A. V. (2003). Effects of gross heterogeneity and anisotropy in forced convection in a porous medium: Layered medium analysis. Journal of Porous Media, 6(1), 51–57. https://doi.org/10.1615/jpormedia.v6.i1.30

Smith, R. C., Seelecke, S., Ounaies, Z., & Smith, J. (2003). A free energy model for hysteresis in ferroelectric materials. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 14(11), 719–739. https://doi.org/10.1177/1045389X03038841

Yang, B., Pan, E., & Yuan, F. G. (2003). Three-dimensional stress analyses in composite laminates with an elastically pinned hole. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 40(8), 2017–2035. https://doi.org/10.1016/S0020-7683(02)00523-1

Kuznetsov, A., Cheng, L., & Xiong, M. (2003). Investigation of turbulence effects on forced convection in a composite porous/fluid duct: Constant wall flux and constant wall temperature cases. HEAT AND MASS TRANSFER, 39(7), 613–623. https://doi.org/10.1007/S00231-002-0377-9

Lewandowski, M., & Ollis, D. F. (2003). Halide acid pretreatments of photocatalysts for oxidation of aromatic air contaminants: rate enhancement, rate inhibition, and a thermodynamic rationale. JOURNAL OF CATALYSIS, 217(1), 38–46. https://doi.org/10.1016/S0021-9517(03)00030-7

Hyun, S., Kleinstreuer, C., & Archie, J. P. (2003). Computational analysis of effects of external carotid artery flow and occlusion on adverse carotid bifurcation hemodynamics. JOURNAL OF VASCULAR SURGERY, 37(6), 1248–1254. https://doi.org/10.1016/S0741-5214(02)75326-3

Ramasubramanian, M. K., & Muthuraman, K. (2003). A computational mechanics model for the brim forming process in paperboard container manufacturing. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 125(3), 476–483. https://doi.org/10.1115/1.1580527

Ma, N., Bliss, D. F., & Iseler, G. W. (2003). Vertical gradient freezing of doped gallium-antimonide semiconductor crystals using submerged heater growth and electromagnetic stirring. JOURNAL OF CRYSTAL GROWTH, 259(1-2), 26–35. https://doi.org/10.1016/S0022-0248(03)01575-6

Muthukumaran, K., Loewe, R. S., Kirmaier, C., Hindin, E., Schwartz, J. K., Sazanovich, IV, … Lindsey, J. S. (2003). Synthesis and excited-state photodynamics of a perylene-monoimide-oxochlorin dyad. A light-harvesting array. JOURNAL OF PHYSICAL CHEMISTRY B, 107(15), 3431–3442. https://doi.org/10.1021/jp026941a

Zeng, T. F., & Liu, W. (2003). Phonon heat conduction in micro- and nano-core-shell structures with cylindrical and spherical geometries. JOURNAL OF APPLIED PHYSICS, 93(7), 4163–4168. https://doi.org/10.1063/1.1556566

Watson, K. A., Lyons, K. M., Donbar, J. M., & Carter, C. D. (2003). On scalar dissipation and partially premixed flame propagation. Combustion Science and Technology, 175(4), 649–664. https://doi.org/10.1080/00102200390196386

Longest, P. W., & Kleinstreuer, C. (2003). Numerical simulation of wall shear stress conditions and platelet localization in realistic end-to-side arterial anastomoses. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 125(5), 671–681. https://doi.org/10.1115/1.1613298

Silverberg, L., Tran, C., & Adcock, K. (2003). Numerical analysis of the basketball shot. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 125(4), 531–540. https://doi.org/10.1115/1.1636193

Zeng, T. F., & Chen, G. (2003, March). Nonequilibrium electron and phonon transport and energy conversion in heterostructures. MICROELECTRONICS JOURNAL, Vol. 34, pp. 201–206. https://doi.org/10.1016/S0026-2692(02)00189-1

Hutapea, P., Yuan, F. G., & Pagano, N. J. (2003). Micro-stress prediction in composite laminates with high stress gradients. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 40(9), 2215–2248. https://doi.org/10.1016/S0020-7683(03)00018-0

Bahei-El-Din, Y. A., & Zikry, M. A. (2003). Impact-induced deformation fields in 2D and 3D woven composites. COMPOSITES SCIENCE AND TECHNOLOGY, 63(7), 923–942. https://doi.org/10.1016/S0266-3538(03)00021-6

Nield, D. A., & Kuznetsov, A. V. (2003). Effects of temperature-dependent viscosity in forced convection in a porous medium: Layered-medium analysis. JOURNAL OF POROUS MEDIA, 6(3), 213–222. https://doi.org/10.1615/JPorMedia.v6.i3.60

Nield, D. A., & Kuznetsov, A. V. (2003). Effects of heterogeneity in forced convection in a porous medium: Parallel-plate channel, Brinkman model. JOURNAL OF POROUS MEDIA, 6(4), 257–266. https://doi.org/10.1615/JPorMedia.v6.i4.40

Wan, Q., & Kuznetsov, A. V. (2003). Effect of non-uniformity of source vibration amplitude on the sound field wave number, attenuation coefficient and Reynolds stress for the acoustic streaming. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 30(1), 27–36. https://doi.org/10.1016/S0735-1933(03)00004-6

Kuznetsov, A. V., & Xiong, M. (2003). Development of an engineering approach to computations of turbulent flows in composite porous/fluid domains. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 42(10), 913–919. https://doi.org/10.1016/S1290-0729(03)00063-2

Kuznetsov, A. V., & Jiang, N. (2003). Bioconvection of negatively geotactic microorganisms in a porous medium: the effect of cell deposition and declogging. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 13(2-3), 341–364. https://doi.org/10.1108/09615530310464535

Kuznetsov, A. V., Avramenko, A. A., & Geng, P. (2003). A similarity solution for a falling plume in bioconvection of oxytactic bacteria in a porous medium. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 30(1), 37–46. https://doi.org/10.1016/S0735-1933(03)00005-8

Li, Y. Y., Roberts, W. L., Brown, M. S., & Herring, G. C. (2003). Transient grating spectroscopy with delayed thermalization in non-combusting CO/air mixtures. OPTICS COMMUNICATIONS, 226(1-6), 255–258. https://doi.org/10.1016/j.optcom.2003.08.036

Yuan, F. G., Yang, S., & Yang, B. (2003). Three-dimensional Green's functions for composite laminates. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 40(2), 331–342. https://doi.org/10.1016/S0020-7683(02)00545-0

Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2003). Thermally developing forced convection in a porous medium: parallel plate channel with walls at uniform temperature, with axial conduction and viscous dissipation effects. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 46(4), 643–651. https://doi.org/10.1016/S0017-9310(02)00327-7

Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2003). Thermally developing forced convection in a porous medium: Parallel-plate channel or circular tube with walls at constant heat flux. JOURNAL OF POROUS MEDIA, 6(3), 203–212. https://doi.org/10.1615/JPorMedia.v6.i3.50

Tafreshi, H. V., & Pourdeyhimi, B. (2003). The effects of nozzle geometry on waterjet breakup at high Reynolds numbers. EXPERIMENTS IN FLUIDS, 35(4), 364–371. https://doi.org/10.1007/s00348-003-0685-y

Tran, C. M., & Southward, S. C. (2003). Stability and convergence of a hybrid adaptive feedforward observer. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 26(1), 189–192. https://doi.org/10.2514/2.5036

Ashmawi, W. M., & Zikry, M. A. (2003). Single void morphological and grain-boundary effects on overall failure in FCC polycrystalline systems. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 343(1-2), 126–142. https://doi.org/10.1016/s0921-5093(02)00325-8

Tafreshi, H. V., & Pourdeyhimi, B. (2003). Simulating the flow dynamics in hydroentangling nozzles: Effect of cone angle and nozzle aspect ratio. TEXTILE RESEARCH JOURNAL, 73(8), 700–704. https://doi.org/10.1177/004051750307300807

Frazier, J. W., & Gopalarathnam, A. (2003). Optimum downwash behind wings in formation flight. JOURNAL OF AIRCRAFT, 40(4), 799–803. https://doi.org/10.2514/2.3162

Kuniholm, J. F., & Ma, N. (2003). Natural convection in a liquid-encapsulated molten semiconductor with a steady magnetic field. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 24(1), 130–136. https://doi.org/10.1016/S0142-727X(02)00205-9

Mejias, M. M., Orlande, H. R. B., & Ozisik, M. N. (2003). Effects of the heating process and body dimensions on the estimation of the thermal conductivity components of orthotropic solids. INVERSE PROBLEMS IN ENGINEERING, 11(1), 75–89. https://doi.org/10.1080/1068276031000105686

Gopalarathnam, A., Broughton, B. A., McGranahan, B. D., & Selig, M. S. (2003). Design of low Reynolds number airfoils with trips. JOURNAL OF AIRCRAFT, 40(4), 768–775. https://doi.org/10.2514/2.3157

Brown, M. S., Li, Y. Y., Roberts, W. L., & Gord, JR. (2003). Analysis of transient-rating signals for reacting-flow applications. APPLIED OPTICS, 42(3), 566–578. https://doi.org/10.1364/AO.42.000566

Kuznetsov, A. V., & Avramenko, A. A. (2003). Analysis of stability of bioconvection of motile oxytactic bacteria in a horizontal fluid saturated porous layer. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 30(5), 593–602. https://doi.org/10.1016/S0735-1933(03)00097-6

Bahei-El-Din, Y. A., & Botrous, A. G. (2003, December). Analysis of progressive fiber debonding in elastic laminates. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 40, pp. 7035–7053. https://doi.org/10.1016/S0020-7683(03)00353-6

Kodal, A., Watson, K. A., Roberts, W. L., & Lyons, K. M. (2003). Turbulence filter and POD analysis for velocity fields in lifted CH4-air diffusion flames. FLOW TURBULENCE AND COMBUSTION, 70(1-4), 21–41. https://doi.org/10.1023/B:APPL.0000004914.21646.c4

Welle, E. J., Roberts, W. L., Carter, C. D., & Donbar, J. M. (2003). The response of a propane-air counter-flow diffusion flame subjected to a transient flow field. COMBUSTION AND FLAME, 135(3), 285–297. https://doi.org/10.1016/S0010-2180(03)00167-6

Kleinstreuer, C., & Zhang, Z. (2003). Targeted drug aerosol deposition analysis for a four-generation lung airway model with hemispherical tumors. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 125(2), 197–206. https://doi.org/10.1115/1.1543548

Yuan, F. G., & Pagano, N. J. (2003). Size scales for accurate homogenization in the presence of severe stress gradients. Mechanics of Advanced Materials and Structures, 10(4), 353–365. https://doi.org/10.1080/15376490390231836

Wan, Q., & Kuznetsov, A. V. (2003). Numerical study of the efficiency of acoustic streaming for enhancing heat transfer between two parallel beams. FLOW TURBULENCE AND COMBUSTION, 70(1-4), 89–114. https://doi.org/10.1023/B:APPL.0000004916.01838.63

Qu, J., Riester, L., Shih, A. J., Scattergood, R. O., Lara-Curzio, E., & Watkins, T. R. (2003). Nanoindentation characterization of surface layers of electrical discharge machined WC-Co. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 125–131. https://doi.org/10.1016/s0921-5093(02)00395-7

Garrell, M. G., Ma, B. M., Shih, A. J., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of polyphenylene-sulfide (PPS) bonded NdFe-B permanent magnets. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 359(1-2), 375–383. https://doi.org/10.1016/s0921-5093(03)00400-3

Tan, K., Grigoriadis, K. M., & Wu, F. (2003). H(infinity) and L(2)-to-L(infinity) gain control of linear parameter-varying systems with parameter-varying delays. IEE PROCEEDINGS-CONTROL THEORY AND APPLICATIONS, 150(5), 509–517. https://doi.org/10.1049/ip-cta:20030708

Wu, F. (2003). Distributed control for interconnected linear parameter dependent systems. IEE PROCEEDINGS-CONTROL THEORY AND APPLICATIONS, 150(5), 518–527. https://doi.org/10.1049/ip-cta:20030706

Shih, A. J., Scattergood, R. O., Curry, A. C., Yonushonis, T. M., Gust, D. J., Grant, M. B., … Watkins, T. R. (2003). Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 125(2), 297–303. https://doi.org/10.1115/1.1559167

Vortmann, C., Schnerr, G. H., & Seelecke, S. (2003). Thermodynamic modeling and simulation of cavitating nozzle flow. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 24(5), 774–783. https://doi.org/10.1016/S0142-727X(03)00003-1

Kuznetsov, A. V., Xiong, M., & Nield, D. A. (2003). Thermally developing forced convection in a porous medium: Circular duct with walls at constant temperature, with longitudinal conduction and viscous dissipation effects. TRANSPORT IN POROUS MEDIA, 53(3), 331–345. https://doi.org/10.1023/A:1025060524816

Zhang, Z., & Kleinstreuer, C. (2003). Species heat and mass transfer in a human upper airway model. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 46(25), 4755–4768. https://doi.org/10.1016/S0017-9310(03)00358-2

Longest, P. W., & Kleinstreuer, C. (2003). Particle-hemodynamics modeling of the distal end-to-side femoral bypass: effects of graft caliber and graft-end cut. MEDICAL ENGINEERING & PHYSICS, 25(10), 843–858. https://doi.org/10.1016/S1350-4533(03)00124-3

Longest, P. W., Kleinstreuer, C., & Archie, J. P. (2003). Particle hemodynamics analysis of Miller cuff arterial anastomosis. JOURNAL OF VASCULAR SURGERY, 38(6), 1353–1362. https://doi.org/10.1016/S0741-5214(03)00950-9

Kim, S. Y., & Kuznetsov, A. V. (2003). Optimization of pin-fin heat sinks using anisotropic local thermal nonequilibrium porous model in a jet impinging channel. Numerical Heat Transfer. Part A, Applications, 44(8), 771–787. https://doi.org/10.1080/10407780390229675

Lankalapalli, S., & Eischen, J. W. (2003). Optimal pick-up locations for transport and handling of limp materials - Part II: Two-dimensional parts. TEXTILE RESEARCH JOURNAL, 73(10), 867–874. https://doi.org/10.1177/004051750307301004

Lankalapalli, S., & Eischen, J. W. (2003). Optimal pick-up locations for transport and handling of limp materials - Part I: One-dimensional strips. TEXTILE RESEARCH JOURNAL, 73(9), 787–796. https://doi.org/10.1177/004051750307300907

Koo, J. M., & Kleinstreuer, C. (2003). Liquid flow in microchannels: experimental observations and computational analyses of microfluidics effects. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 13(5), 568–579. https://doi.org/10.1088/0960-1317/13/5/307

Baurle, R. A., Tam, C. J., Edwards, JR, & Hassan, H. A. (2003, August). Hybrid simulation approach for cavity flows: Blending, algorithm, and boundary treatment issues. AIAA JOURNAL, Vol. 41, pp. 1463–1480. https://doi.org/10.2514/2.2129

Buchanan, JR, Kleinstreuer, C., Hyun, S., & Truskey, G. A. (2003). Hemodynamics simulation and identification of susceptible sites of atherosclerotic lesion formation in a model abdominal aorta. JOURNAL OF BIOMECHANICS, 36(8), 1185–1196. https://doi.org/10.1016/S0021-9290(03)00088-5

Boothe, B. J., Shih, A. J., Kong, N., & Roberts, W. L. (2003). Goniometric characteristics of optical fibres for temperature measurement in diesel engine exhaust filters. MEASUREMENT SCIENCE AND TECHNOLOGY, 14(5), 563–572. https://doi.org/10.1088/0957-0233/14/5/305

Ramasubramanian, M. K., Noori, M. N., & Lee, G. K. (2003). Evolution of mechatronics into a graduate degree program in the United States: The NC State University master of science program with mechatronics concentration. International Journal of Engineering Education, 19(4), 519–524.

Baucom, J. N., & Zikry, M. (2003). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation. Journal of Composite Materials, 37(18), 1651–1674. https://doi.org/10.1177/002199803035178

Echekki, T., & Chen, J. H. (2003). Direct numerical simulation of autoignition in non-homogeneous hydrogen-air mixtures. COMBUSTION AND FLAME, 134(3), 169–191. https://doi.org/10.1016/S0010-2180(03)00088-9

Mao, D. M., Edwards, JR, Kuznetsov, A. V., & Srivastava, R. K. (2003). Development of low-diffusion flux-splitting methods for dense gas-solid flows. JOURNAL OF COMPUTATIONAL PHYSICS, 185(1), 100–119. https://doi.org/10.1016/S0021-9991(02)00049-9

Wu, F., & Jaramillo, J. J. (2003). Computationally efficient algorithm for frequency-weighted optimal H-infinity model reduction. Asian Journal of Control, 5(3), 341–349. https://doi.org/10.1111/j.1934-6093.2003.tb00126.x

Tafreshi, H. V., & Pourdeyhimi, B. (2003). Role of baffles on flow fields inside wet-lay mixing tanks and their potential influence on fiber dispersion. Textile Research Journal, 73(7), 575–582. https://doi.org/10.1177/004051750307300703

Longest, P. W., Kleinstreuer, C., Truskey, G. A., & Buchanan, JR. (2003). Relation between near-wall residence times of monocytes and early lesion growth in the rabbit aorto-celiac junction. ANNALS OF BIOMEDICAL ENGINEERING, 31(1), 53–64. https://doi.org/10.1114/1.1531635

Dust, J. C., & Ma, N. (2003). Macrosegregation during directional solidification of alloyed semiconductor crystals with a transverse magnetic field. AIAA Aerospace Sciences Meeting and Exhibit (41st: Reno, NV, 2003).  (AIAA paper; no. 2003-1310).

Farer, R., Seyam, A. M., Ghosh, T. K., Batra, S. K., Grant, E., & Lee, G. (2003). Forming shaped/molded structures by integrating meltblowing and robotic technologies. TEXTILE RESEARCH JOURNAL, 73(1), 15–21. https://doi.org/10.1177/004051750307300103

Kuznetsov, A. V., & Avramenko, A. A. (2003). The effect of deposition and declogging on the critical permeability in bioconvection in a porous medium. ACTA MECHANICA, 160(1-2), 113–125. https://doi.org/10.1007/s00707-002-0978-x

Studer, M., Peters, K., & Botsis, J. (2003). Method for determination of crack bridging parameters using long optical fiber Bragg grating sensors. COMPOSITES PART B-ENGINEERING, 34(4), 347–359. https://doi.org/10.1016/S1359-8368(03)00004-0

Clark, W. I., Shih, A. J., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part II: experiment design and results. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 533–542. https://doi.org/10.1016/S0890-6955(02)00216-X

Clark, W. I., Shih, A. J., Hardin, C. W., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part I: process monitoring and wire tension force. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 523–532. https://doi.org/10.1016/S0890-6955(02)00215-8

Smith, R. C., Dapino, M. J., & Seelecke, S. (2003). Free energy model for hysteresis in magnetostrictive transducers. JOURNAL OF APPLIED PHYSICS, 93(1), 458–466. https://doi.org/10.1063/1.1524312

Morton, J. L., Ma, N., Bliss, D. F., & Bryant, G. G. (2003, March). Magnetic field effects during liquid-encapsulated Czochralski growth of doped photonic semiconductor crystals. JOURNAL OF CRYSTAL GROWTH, Vol. 250, pp. 174–182. https://doi.org/10.1016/S0022-0248(02)02261-3

Coffey, T., McMullan, R. J., Kelley, C. T., & McRae, D. S. (2003, March 1). Globally convergent algorithms for nonsmooth nonlinear equations in computational fluid dynamics. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, Vol. 152, pp. 69–81. https://doi.org/10.1016/S0377-0427(02)00697-0

Wu, F. (2003). Robust quadratic performance for time-delayed uncertain linear systems. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 13(2), 153–172. https://doi.org/10.1002/rnc.720

Kleinstreuer, C., & Zhang, Z. (2003). Laminar-to-turbulent fluid-particle flows in a human airway model. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 29(2), 271–289. https://doi.org/10.1016/S0301-9322(02)00131-3

Curry, A. C., Shih, A. J., Kong, J., Scattergood, R. O., & McSpadden, S. B. (2003). Grinding temperature measurements in magnesia-partially-stabilized zirconia using infrared spectrometry. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 86(2), 333–341. https://doi.org/10.1111/j.1151-2916.2003.tb00019.x

Ma, N. W., J. S., & Witkowski, L. M. (2003). Thermocapillary instability with a rotating magnetic field and system rotation. ASME Proceedings of the International Mechanical Engineering Congress and Exposition, Washington D. C., 297–303. Washington, DC: ASME.

Norris, J. D., & Chokani, N. (2003). Rapid scanning of overheat ratios using a constant voltage anemometer. AIAA JOURNAL, 41(8), 1619–1621. https://doi.org/10.2514/2.2122

Bahei-El-Din, Y. A., Zikry, M. A., & Rajendran, A. M. (2003). Impact-induced deformation fields in 3D cellular woven composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 34(8), 765–778. https://doi.org/10.1016/S1359-835X(03)00143-X

Sheikh-Ahmad, J. Y., Lewandowski, C. M., Bailey, J. A., & Stewart, J. S. (2003). Experimental and numerical method for determining temperature distribution in a wood cutting tool. EXPERIMENTAL HEAT TRANSFER, 16(4), 255–271. https://doi.org/10.1080/08916150390223092

Kuznetsov, A. V., & Avramenko, A. A. (2003). Stability analysis of bioconvection of gyrotactic motile microorganisms in a fluid saturated porous medium. TRANSPORT IN POROUS MEDIA, 53(1), 95–104. https://doi.org/10.1023/A:1023582001592

Ma, N. (2003). Solutal convection during growth of alloyed semiconductor crystals in a magnetic field. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 17(1), 77–81. https://doi.org/10.2514/2.6736

Jin, Y., & Yuan, F. G. (2003). Simulation of elastic properties of single-walled carbon nanotubes. COMPOSITES SCIENCE AND TECHNOLOGY, 63(11), 1507–1515. https://doi.org/10.1016/S0266-3538(03)00074-5

Tafreshi, H. V., Pourdeyhimi, B., Holmes, R., & Shiffler, D. (2003). Simulating and characterizing water flows inside hydroentangling orifices. TEXTILE RESEARCH JOURNAL, 73(3), 256–262. https://doi.org/10.1177/004051750307300310

Garrell, M. G., Shih, A. J., Ma, B. M., Lara-Curzio, E., & Scattergood, R. O. (2003). Mechanical properties of Nylon bonded Nd-Fe-B permanent magnets. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 257(1), 32–43. https://doi.org/10.1016/S0304-8853(02)00983-6

Ashmawi, W. M., & Zikry, M. A. (2003). Grain-boundary interfaces and void interactions in porous aggregates. PHILOSOPHICAL MAGAZINE, Vol. 83, pp. 3917–3944. https://doi.org/10.1080/14786430310001599423

Ashmawi, W. M., & Zikry, M. A. (2003). Grain boundary effects and void porosity evolution. MECHANICS OF MATERIALS, Vol. 35, pp. 537–552. https://doi.org/10.1016/S0167-6636(02)00269-7

Fasina, O. O., Fleming, H. P., Humphries, E. G., Thompson, R. L., & Reina, L. R. (2003). Crossflow filtration of brine from cucumber fermentation. Applied Engineering in Agriculture, 19(1), 107–113. https://doi.org/10.13031/2013.12722

Longest, P. W., & Kleinstreuer, C. (2003). Comparison of blood particle deposition models for non-parallel flow domains. JOURNAL OF BIOMECHANICS, 36(3), 421–430. https://doi.org/10.1016/S0021-9290(02)00434-7

Silverberg, L., & Duval, L. (2003). Analysis of trans-permanent magnetic systems. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 125(1), 143–146. https://doi.org/10.1115/1.1543553