Mechanical and Aerospace Engineering - 2004 Simulating cavitation and hydraulic flip inside hydroentangling nozzles. (2004). Textile Research Journal. Retrieved from https://publons.com/wos-op/publon/65200209/ Nasir, H., Ekkad, S. V., Bunker, R. S., & Prakash, C. (2004). Effects of tip gap film injection from plain and squealer blade tips. Proceedings of the ASME Turbo Expo 2004, 3, 419–427. https://doi.org/10.1115/gt2004-53455 Saxena, V., & Ekkad, S. V. (2004). Effect of squealer geometry on tip flow and heat transfer for a turbine blade in a low speed cascade. Journal of Heat Transfer, 126(4), 546–553. https://doi.org/10.1115/1.1777580 Hebert, R., Ekkad, S. V., Khanna, V., Abreu, M., & Moon, H.-K. (2004). Heat transfer study of a novel low-crossflow design for jet impingement. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375(1), 583–588. https://doi.org/10.1115/IMECE2004-60468 Nasir, H., Ekkad, S. V., Kontrovitz, D. M., Bunker, R. S., & Prakash, C. (2004). Effect of tip gap and squealer geometry on detailed heat transfer measurements over a high pressure turbine rotor blade tip. Journal of Turbomachinery, 126(2), 221–228. https://doi.org/10.1115/1.1731416 Ekkad, S. V., Ou, S., & Rivir, R. B. (2004). Effect of jet pulsation and duty cycle on film cooling from a single jet on a leading edge model. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375(1), 575–582. https://doi.org/10.1115/IMECE2004-60466 Saxena, V., Nasir, H., & Ekkad, S. V. (2004). Effect of blade tip geometry on tip flow and heat transfer for a blade in a low-speed cascade. Journal of Turbomachinery, 126(1), 130–138. https://doi.org/10.1115/1.1643385 Hebert, R., Ekkad, S. V., & Khanna, V. (2004). Combination of impingement and trip strips for combustor liner backside cooling. Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, 3, 179–185. https://doi.org/10.1115/ht-fed2004-56536 Ekkad, S. V., Ou, S., & Rivir, R. B. (2004). A transient infrared thermography method for simultaneous film cooling effectiveness and heat transfer coefficient measurements from a single test. Proceedings of the ASME Turbo Expo 2004, 3, 999–1005. https://doi.org/10.1115/gt2004-54236 Ekkad, S. V., Ou, S., & Rivir, R. B. (2004). A transient infrared thermography method for simultaneous film cooling effectiveness and heat transfer coefficient measurements from a single test. Journal of Turbomachinery, 126(4), 597–603. https://doi.org/10.1115/1.1791283 Zikry, M. A., & Ashmawi, W. M. (2004). Failure modes and grain-boundary effects in polycrystalline materials. Materials Research Society Symposium - Proceedings, 819, 21–26. https://doi.org/10.1557/proc-819-n1.3 Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2004). Failure identification methodology for woven composites incorporating sensor degradation. American Society of Mechanical Engineers, Materials Division (Publication) MD, 99, 31–40. https://doi.org/10.1115/IMECE2004-61802 Baucom, J. N., & Zikry, M. A. (2004). Erratum: Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation (Journal of Composite Materials, 37, 18, (1651-1674) DOI: 10.1177/0021998304042170). Journal of Composite Materials, 38(6), 535. https://doi.org/10.1177/0021998304042170 Prabhugoud, M., Pearson, J., Peters, K., & Zikry, M. (2004). Demonstration of failure identification methodology incorporating sensor degradation. Proceedings of SPIE - The International Society for Optical Engineering, 5391, 107–116. https://doi.org/10.1117/12.540093 Tafreshi, H. V., Maze, B., & Pourdeyhimi, B. (2004). In-plane and Through-plane Liquid Flow Simulation in Nonwoven Glass Fiber Mats. International Nonwovens Technical Conference (INTC 2004). Presented at the International Nonwovens Technical Conference (INTC 2004), Toronto, Ontario, Canada. Tafreshi, H. V., & Pourdeyhimi, B. (2004). A Study on Hydroentangling Impact Force. International Nonwovens Technical Conference (INTC 2004). Presented at the International Nonwovens Technical Conference (INTC 2004), Toronto, Ontario, Canada. Tafreshi, H. V., Maze, B., & Pourdeyhimi, B. (2004). Modeling Particle Filtration by Glass Fiber Filters. The Fiber Society Spring Symposium. Presented at the Fiber Society Spring Symposium, St. Louis, Missouri. Tafreshi, H. V., Maze, B., & Pourdeyhimi, B. (2004). Modeling Submicron Particle Filtration by Virtual Glass Fiber Mats. Advances in Filtration & Separations Media. Presented at the Advances in Filtration & Separations Media, Baltimore, Maryland. Tafreshi, H. V., & Pourdeyhimi, B. (2004). Cavitation and Hydraulic Flip. Fluent News, 13(1), 38. Vahedi Tafreshi, H., & Pourdeyhimi, B. (2004). Simulating cavitation and hydraulic flip inside hydroentangling nozzles. Textile Research Journal, Vol. 74, pp. 359–364. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0345722190&partnerID=MN8TOARS Eischen, J. W., & Lankalapalli, S. (2004). Optimal Pick-up Locations for Transport and Handling of Limp Materials. Proceedings of the Eighth Pan American Congress of Applied Mechanics. Presented at the Eighth Pan American Congress of Applied Mechanics, Havana, Cuba. Reyhanoglu, M. (2004). Maneuvering control problems for a spacecraft with unactuated fuel slosh dynamics. Proceedings of 2003 IEEE Conference on Control Applications, 2003. CCA 2003. Presented at the 2003 IEEE Conference on Control Applications, 2003. CCA 2003., Istanbul, Turkey. https://doi.org/10.1109/cca.2003.1223522 Palmer, J. A., Mulling, J. F., Dessent, B., Grant, E., Eischen, J. W., Gruverman, A., … Franzon, P. D. (2004). The design, fabrication, and characterization of millimeter scale motors for miniature direct drive robots. IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004. Presented at the IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004. https://doi.org/10.1109/robot.2004.1302454 Fang, T. (2004). The hydromagnetic flow over an oscillating flat plate with arbitrary periodic oscillation. Mechanics Research Communications, 31(1), 129–135. https://doi.org/10.1016/S0093-6413(03)00084-3 Fang, T. (2004). Similarity Solutions for Heat Conduction in a Semi-Infinite Medium with Power Law Thermal Conductivity. International Communications in Heat and Mass Transfer, 31(4), 477–485. https://doi.org/10.1016/S0735-1933(04)00029-6 Fang, T. (2004). Unsteady solution of viscous fluid flow in an infinite cylinder with a variable body force. Physics of Fluids, 16(1), 200–203. https://doi.org/10.1063/1.1628689 Mathews, W. S., Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2004). Soot diagnostics using laser-induced incandescence within an optically accessible HSDI diesel engine. SAE Technical Papers. https://doi.org/10.4271/2004-01-1412 Fang, T. (2004). Influences of fluid property variation on the boundary layers of a stretching surface. Acta Mechanica, 171(1-2), 105–118. https://doi.org/10.1007/s00707-004-0125-y Fang, T. (2004). Further Discussion on the Incompressible Pressure—Driven Flow in a Channel with Porous Walls. International Communications in Heat and Mass Transfer, 31(4), 487–500. https://doi.org/10.1016/S0735-1933(04)00030-2 Fang, T. (2004). A note on the incompressible couette flow with porous walls. International Communications in Heat and Mass Transfer, 31(1), 31–41. https://doi.org/10.1016/S0735-1933(03)00199-4 Baucom, J. N., & Zikry, M. (2004). Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation (vol 37, pg 1651, 2003). Journal of Composite Materials, Vol. 38, p. 535. https://doi.org/10.1177/0021998303035178 Zhu, Y., & Espinosa, H. D. (2004). Effect of temperature on capacitive RF MEMS switch performance—a coupled-field analysis. Journal of Micromechanics and Microengineering, 14(8), 1270–1279. https://doi.org/10.1088/0960-1317/14/8/021 Zhu, Y., & Espinosa, H. D. (2004). Reliability of capacitive RF MEMS switches at high and low temperatures. International Journal of RF and Microwave Computer-Aided Engineering, 14(4), 317–328. https://doi.org/10.1002/mmce.20015 Gallant, F. M., Bruck, H. A., & Kota, A. K. (2004). Fabrication of Particle-Reinforced Polymers with Continuous Gradient Architectures Using Twin Screw Extrusion Process. Journal of Composite Materials, 38(21), 1873–1893. https://doi.org/10.1177/0021998304048414 Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2004). High-rate flame synthesis of vertically aligned carbon nanotubes using electric field control. Carbon, 42(3), 599–608. https://doi.org/10.1016/j.carbon.2003.12.086 Zhang, Z., Kleinstreuer, C., Kim, C. S., & Cheng, Y. S. (2004). Vaporizing Microdroplet Inhalation, Transport, and Deposition in a Human Upper Airway Model. Aerosol Science and Technology, 38(1), 36–49. https://doi.org/10.1080/02786820300985 Wan, Q., & Kuznetsov, A. V. (2004). INVESTIGATION OF HYSTERESIS IN ACOUSTICALLY DRIVEN CHANNEL FLOW AT ULTRASONIC FREQUENCY. Numerical Heat Transfer, Part A: Applications, 47(2), 137–146. https://doi.org/10.1080/10407780590885873 Avramenko, A. A., Kobzar, S. G., Shevchuk, I. V., Kuznetsov, A. V., & Basok, B. I. (2004). Laminar forced convection in curved channel with vortex structures. Journal of Thermal Science, 13(2), 143–150. https://doi.org/10.1007/s11630-004-0023-6 Chang, C.-H., Montoya, J. C., Akilian, M., Lapsa, A., Heilmann, R. K., Schattenburg, M. L., … Goray, L. I. (2004). High fidelity blazed grating replication using nanoimprint lithography. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 22(6), 3260. https://doi.org/10.1116/1.1809614 Echekki, T., Chen, J.-Y., & Hegde, U. (2004). Numerical investigation of buoyancy effects on triple flame stability. Combustion Science and Technology, 176(3), 381–407. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-1542316705&partnerID=MN8TOARS Luo, H., Baum, J. D., & Lohner, R. (2004). On the computation of multi-material flows using ALE formulation. JOURNAL OF COMPUTATIONAL PHYSICS, 194(1), 304–328. https://doi.org/10.1016/j.jcp.2003.09.026 Aue-u-lan, Y., Ngaile, G., & Altan, T. (2004). Optimizing tube hydroforming using process simulation and experimental verification. Journal of Materials Processing Technology, 146, 137–143. https://doi.org/10.1016/S0924-0136(03)00854-9 Shirgaokar, M., Cho, H., Ngaile, G., Altan, T., Yu, J.-H., Balconi, J., … Worrell, W. J. (2004). Optimization of mechanical crimping to assemble tubular components. Journal of Materials Processing Technology, 146, 35–43. https://doi.org/10.1016/S0924-0136(03)00842-2 Palaniswamy, H., Ngaile, G., & Altan, T. (2004). Optimization of blank dimensions to reduce springback in the flexforming process. Journal of Materials Processing Technology, 146, 28–34. https://doi.org/10.1016/S0924-0136(03)00841-0 Ngaile, G., Jaeger, S., & Altan, T. (2004). Lubrication in tube hydroforming (THF). Part II: Performance evaluation of lubricants using LDH test and pear-shaped tube expansion test. Journal of Materials Processing Technology, 146, 116–123. https://doi.org/10.1016/S0924-0136(03)00851-3 Ngaile, G., Jaeger, S., & Altan, T. (2004). Lubrication in tube hydroforming (THF). Part I: Lubrication mechanisms and development of model tests to evaluate lubricants and die coatings in the transition and expansion zones. Journal of Materials Processing Technology, 146, 108–115. https://doi.org/10.1016/S0924-0136(03)00850-1 Shirgaokar, M., Ngaile, G., Altan, T., Yu, J.-H., Balconi, J., Rentfrow, R., & Worrell, W. J. (2004). Hydraulic crimping: Application to the assembly of tubular components. Journal of Materials Processing Technology, 146, 44–51. https://doi.org/10.1016/S0924-0136(03)00843-4 Palaniswamy, H., Ngaile, G., & Altan, T. (2004). Finite element simulation of magnesium alloy sheet forming at elevated temperatures. Journal of Materials Processing Technology, 146, 52–60. https://doi.org/10.1016/S0924-0136(03)00844-6 Gutscher, G., Wu, H.-C., Ngaile, G., & Altan, T. (2004). Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test. Journal of Materials Processing Technology, 146, 1–7. https://doi.org/10.1016/S0924-0136(03)00838-0 Cold and hot forging: Fundamentals and applications. (2004). Materials Park, Ohio: ASM International. Tollner, E. W., & Huang, H.-Y. S. (2004). A shaft design aid for integrating basic elements of introductory machine design. American Society for Engineering Education Annual Conference & Exposition, Salt Lake City, Utah, 66. Koo, J., & Kleinstreuer, C. (2004). A new thermal conductivity model for nanofluids. JOURNAL OF NANOPARTICLE RESEARCH, 6(6), 577–588. https://doi.org/10.1007/s11051-004-3170-5 Becker, S. M., Kuznetsov, A. V., & Avramenko, A. A. (2004). Numerical modeling of a falling bioconvection plume in a porous medium. FLUID DYNAMICS RESEARCH, 35(5), 323–339. https://doi.org/10.1016/j.fluiddyn.2004.07.003 Piseri, P., Tafreshi, H. V., & Milani, P. (2004). [Review of Manipulation of nanoparticles in supersonic beams for the production of nanostructured materials]. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 8(3-4), 195–202. https://doi.org/10.1016/j.cossms.2004.08.002 Marley, S. K., Welle, E. J., Lyons, K. M., & Roberts, W. L. (2004). Effects of leading edge entrainment on the double flame structure in lifted ethanol spray flames. Experimental Thermal and Fluid Science, 29(1), 23–31. https://doi.org/10.1016/j.ecpthermflusci.2004.01.009 Bond, R. B., & Edwards, JR. (2004). Computational analysis of an independent ramjet stream in a combined cycle engine. AIAA JOURNAL, 42(11), 2276–2283. https://doi.org/10.2514/1.4465 Strenkowski, J. S., Hsieh, C. C., & Shih, A. (2004). An analytical finite element technique for predicting thrust force and torque in drilling. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 44(12-13), 1413–1421. https://doi.org/10.1016/j.ijmachtools.2004.01.005 Longest, P. W., & Kleinstreuer, C. (2004). Interacting effects of uniform flow, plane shear, and near-wall proximity on the heat and mass transfer of respiratory aerosols. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47(22), 4745–4759. https://doi.org/10.1016/j.ijheatmasstransfer.2004.05.029 Dow, T. A., Miller, E. L., & Garrard, K. (2004). Tool force and deflection compensation for small milling tools. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 28(1), 31–45. https://doi.org/10.1016/S0141-6359(03)00072-2 Saadat, S., Noori, M. N., Buckner, G. D., Furukawa, T. D., & Suzuki, Y. (2004). Structural health monitoring and damage detection using an intelligent parameter varying (IPV) technique. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 39(10), 1687–1697. https://doi.org/10.1016/j.ijnonlinmec.2004.03.001 Wang, X., & Ma, N. (2004). Strong magnetic field asymptotic model for binary alloyed semiconductor crystal growth. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 18(4), 476–480. https://doi.org/10.2514/1.11905 Kuznetsov, A. (2004). Numerical modeling of turbulent flow in a composite porous/fluid duct utilizing a two-layer k-epsilon model to account for interface roughness. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 43(11), 1047–1056. https://doi.org/10.1016/j.ijthermalsci.2004.02.011 Song, G. W., Barker, R. L., Hamouda, H., Kuznetsov, A. V., Chitrphiromsri, P., & Grimes, R. V. (2004). Modeling the thermal protective performance of heat resistant garments in flash fire exposures. TEXTILE RESEARCH JOURNAL, 74(12), 1033–1040. https://doi.org/10.1177/004051750407401201 Shih, A. J., & McCall, R. C. (2004). Kinematics and wear of tool blades for scrap tire shredding. MACHINING SCIENCE AND TECHNOLOGY, 8(2), 193–210. https://doi.org/10.1081/MST-200028728 Nield, D. A., & Kuznetsov, A. V. (2004). Interaction of transverse heterogeneity and thermal development of forced convection in a porous medium. TRANSPORT IN POROUS MEDIA, 57(1), 103–111. https://doi.org/10.1023/B:TIPM.0000032701.17429.97 Fan, C. C., Xiao, X. D., Edwards, JR, & Hassan, H. A. (2004). Hybrid large-eddy/Reynolds-averaged Navier-Stokes simulations of shock-separated flows. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 41, pp. 897–906. https://doi.org/10.2514/1.3735 Wu, F., & Soto, M. (2004). Extended anti-windup control schemes for LTI and LFT systems with actuator saturations. International Journal of Robust and Nonlinear Control, 14(15), 1255–1281. https://doi.org/10.1002/rnc.943 Longest, P. W., Kleinstreuer, C., & Buchanan, JR. (2004). Efficient computation of micro-particle dynamics including wall effects. COMPUTERS & FLUIDS, 33(4), 577–601. https://doi.org/10.1016/j.compfluid.2003.06.002 Kuznetsov, A. V., & Becker, S. M. (2004). Effect of the interface roughness on turbulent convective heat transfer in a composite porous/fluid duct. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 31(1), 11–20. https://doi.org/10.1016/s0735-1933(03)00197-0 Kuznetsov, A. V., & Avramenko, A. A. (2004). Effect of small particles on the stability of bioconvection in a suspension of gyrotactic microorganisms in a layer of finite depth. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 31(1), 1–10. https://doi.org/10.1016/s0735-1933(03)00196-9 Ma, N., Walker, J. S., & Witkowski, L. M. (2004). Combined effects of rotating magnetic field and rotating system on the thermocapillary instability in the floating zone crystal growth process. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 126(2), 230–235. https://doi.org/10.1115/1.1666883 Xiao, X., Edwards, JR, & Hassan, H. A. (2004, December). Blending functions in hybrid large-eddy/Reynolds-averaged Navier-Stokes simulations. AIAA JOURNAL, Vol. 42, pp. 2508–2515. https://doi.org/10.2514/1.2094 Mao, D. M., Edwards, JR, Kuznetsov, A. V., & Srivastava, R. K. (2004). Three-dimensional numerical simulation of a circulating fluidized bed reactor for multi-pollutant control. CHEMICAL ENGINEERING SCIENCE, 59(20), 4279–4289. https://doi.org/10.1016/j.ces.2004.06.004 Palmer, J. A., Dessent, B., Mulling, J. F., Usher, T., Grant, E., Eischen, J. W., … Franzon, P. D. (2004). The design and characterization of a novel piezoelectric transducer-based linear motor. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 9(2), 392–398. https://doi.org/10.1109/TMECH.2004.828647 Avramenko, A. A., & Kuznetsov, A. V. (2004). Stability of a suspension of gyrotactic microorganisms in superimposed fluid and porous layers. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 31(8), 1057–1066. https://doi.org/10.1016/j.icheatmasstransfer.2004.08.003 Hyun, S., Kleinstreuer, C., Longest, P. W., & Chen, C. (2004). Particle-hemodynamics simulations and design options for surgical reconstruction of diseased carotid artery bifurcations. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 126(2), 188–195. https://doi.org/10.1115/1.1688777 Wu, F., & Bei, L. (2004). On convexified robust control synthesis. AUTOMATICA, 40(6), 1003–1010. https://doi.org/10.1016/j.automatica.2004.01.010 Prabhugoud, M., & Peters, K. (2004). Modified transfer matrix formulation for Bragg grating strain sensors. JOURNAL OF LIGHTWAVE TECHNOLOGY, 22(10), 2302–2309. https://doi.org/10.1109/JLT.2004.833281 Nield, D. A., & Kuznetsov, A. V. (2004). Forced convection in a helical pipe filled with a saturated porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47(24), 5175–5180. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.015 Nield, D. A., & Kuznetsov, A. V. (2004). Forced convection in a bi-disperse porous medium channel: a conjugate problem. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47(24), 5375–5380. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.018 Hardin, C. W., Qu, J., & Shih, A. J. (2004). Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers. MATERIALS AND MANUFACTURING PROCESSES, 19(2), 355–367. https://doi.org/10.1081/AMP-120029960 Seminario, J. M., Ma, Y. F., Agapito, L. A., Yan, L. M., Araujo, R. A., Bingi, S., … Tour, J. M. (2004). Clustering effects on discontinuous gold film NanoCells. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 4(7), 907–917. https://doi.org/10.1166/jnn.2004.104 Hou, Z. K., Hera, A., & Noori, M. (2004, July). A stochastic model for localized disturbances and its applications. PROBABILISTIC ENGINEERING MECHANICS, Vol. 19, pp. 211–218. https://doi.org/10.1016/j.probengmech.2004.02.004 Wan, Q., & Kuznetsov, A. V. (2004). Investigation of the acoustic streaming in a rectangular cavity induced by the vibration of its lid. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 31(4), 467–476. https://doi.org/10.1016/S0735-1933(04)00028-4 Shih, A. J., Lewis, M. A., & Strenkowski, J. S. (2004). End milling of elastomers - Fixture design and tool effectiveness for material removal. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 126(1), 115–123. https://doi.org/10.1115/1.1616951 Zhang, P., Stevie, F., Vanfleet, R., Neelakantan, R., Klimov, M., Zhou, D., & Chow, L. (2004). Diffusion profiles of high dosage Cr and V ions implanted into silicon. JOURNAL OF APPLIED PHYSICS, 96(2), 1053–1058. https://doi.org/10.1063/1.1756221 Shih, A. J., Luo, J., Lewis, M. A., & Strenkowski, J. S. (2004). Chip morphology and forces in end milling of elastomers. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 126(1), 124–130. https://doi.org/10.1115/1.1633276 Tu, J. F., Corless, M., & Jeppsson, J. (2004). Robust control of high speed end milling with unknown process parameter and CNC delay. Journal of Aerospace Engineering, 17(1), 09-. https://doi.org/10.1061/(asce)0893-1321(2004)17:1(1) Balkey, M. M., Day, R. D., Batha, S. H., Elliot, N. E., Pierce, T., & Sandoval, D. L. (2004, March). Production and metrology of cylindrical inertial confinement fusion targets with sinusoidal perturbations. FUSION SCIENCE AND TECHNOLOGY, Vol. 45, pp. 107–112. https://doi.org/10.13182/FST04-A435 Kuznetsov, A. V. (2004). Effect of turbulence on forced convection in a composite tube partly filled with a porous medium. JOURNAL OF POROUS MEDIA, 7(1), 59–64. https://doi.org/10.1615/JPorMedia.v7.i1.60 Ashmawi, W. M., Zikry, M. A., Wang, K., & Reeber, R. R. (2004). Modeling of residual stresses for thermally strained GaN/Al2O3 heterostructures. JOURNAL OF CRYSTAL GROWTH, 266(4), 415–422. https://doi.org/10.1016/j.jcrysgro.2004.02.105 Farrell, M. V., & Ma, N. (2004). Macrosegregation during alloyed semiconductor crystal growth in strong axial and transverse magnetic fields. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47(14-16), 3047–3055. https://doi.org/10.1016/j.ijheatmasstransfer.2004.02.021 Li, S. J., Suzuki, Y., & Noori, M. (2004, November). Improvement of parameter estimation for non-linear hysteretic systems with slip by a fast Bayesian bootstrap filter. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol. 39, pp. 1435–1445. https://doi.org/10.1016/j.ijnonlinmec.2004.02.005 Geng, P., & Kuznetsov, A. V. (2004). Effect of small solid particles on the development of bioconvection plumes. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 31(5), 629–638. https://doi.org/10.1016/S0735-1933(04)00050-8 Manning, M. L., & Chokani, N. (2004). Computational evaluation of quiet tunnel hypersonic boundary-layer stability experiments. JOURNAL OF SPACECRAFT AND ROCKETS, 41(3), 406–415. https://doi.org/10.2514/1.10698 Bakkal, M., Shih, A. J., & Scattergood, R. O. (2004). Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 44(9), 915–925. https://doi.org/10.1016/j.ijmachtools.2004.02.002 Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2004). Thermally developing forced convection in a porous medium: Parallel-plate channel or circular tube with isothermal walls. JOURNAL OF POROUS MEDIA, 7(1), 19–27. https://doi.org/10.1615/JPorMedia.v7.i1.30 Nield, D. A., Kuznetsov, A. V., & Avramenko, A. A. (2004). The onset of bioconvection in a horizontal porous-medium layer. TRANSPORT IN POROUS MEDIA, 54(3), 335–344. https://doi.org/10.1023/B:TIPM.0000003662.31212.5b Shi, H., Kleinstreuer, C., Zhang, Z., & Kim, C. S. (2004). Nanoparticle transport and deposition in bifurcating tubes with different inlet conditions. PHYSICS OF FLUIDS, 16(7), 2199–2213. https://doi.org/10.1063/1.1724830 Li, S. J., Suzuki, Y., & Noori, M. (2004). Identification of hysteretic systems with slip using bootstrap filter. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 18(4), 781–795. https://doi.org/10.1016/j.ymssp.2003.08.001 Wu, F., & Lu, B. (2004). Anti-windup control design for exponentially unstable LTI systems with actuator saturation. SYSTEMS & CONTROL LETTERS, 52(3-4), 305–322. https://doi.org/10.1016/j.sysconle.2004.02.007 Kuznetsov, A. V., Avramenko, A. A., & Geng, P. (2004). Analytical investigation of a falling plume caused by bioconvection of oxytactic bacteria in a fluid saturated porous medium. International Journal of Engineering Science, 42(06-May), 557–569. https://doi.org/10.1016/j.ijengsci.2003.08.004 Saadat, S., Buckner, G. D., Furukawa, T., & Noori, M. N. (2004). An intelligent parameter varying (IPV) approach for non-linear system identification of base excited structures. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 39(6), 993–1004. https://doi.org/10.1016/S0020-7462(03)00091-X Bakkal, M., Liu, C. T., Watkins, T. R., Scattergood, R. O., & Shih, A. J. (2004). Oxidation and crystallization of Zr-based bulk metallic glass due to machining. Intermetallics, 12(2), 195–204. https://doi.org/10.1016/j.internet.2003.09.017 Panusittikorn, W., Lee, M. C., & Ro, P. I. (2004). Modeling and sliding-mode control of friction-based object transport using two-mode ultrasonic excitation. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 51(4), 917–926. https://doi.org/10.1109/TIE.2004.831761 Marley, S. K., Lyons, K. M., & Watson, K. A. (2004). Leading-edge reaction zones in lifted-jet gas and spray flames. FLOW TURBULENCE AND COMBUSTION, 72(1), 29–47. https://doi.org/10.1023/B:APPL.0000014906.91990.4e Wu, T., & Ro, P. I. (2004). Dynamic peak amplitude analysis and bonding layer eiiects of piezoelectric bimorph cantilevers. SMART MATERIALS AND STRUCTURES, 13(1), 203–210. https://doi.org/10.1088/0964-1726/13/1/024 Bahei-El-Din, Y. A., Rajendran, A. M., & Zikry, M. A. (2004). A micromechanical model for damage progression in woven composite systems. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 41(9-10), 2307–2330. https://doi.org/10.1016/j.ijsolstr.2003.12.006 Avramenko, A. A., Kobzar, S. G., Shevchuk, I. V., Kuznetsov, A. V., & Basok, B. I. (2004). Laminar forced convection in curved channel with vortex structures. International Journal of Turbo & Jet. Engines, 21(1), 19–28. https://doi.org/10.1515/tjj.2004.21.1.19 Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2004). Effects of viscous dissipation and flow work on forced convection in a channel filled by a saturated porous medium. TRANSPORT IN POROUS MEDIA, 56(3), 351–367. https://doi.org/10.1023/B:TIPM.0000026087.77213.c8 Zhang, Z., Kleinstreuer, C., Kim, C. S., & Cheng, Y. S. (2004). Vaporizing microdroplet inhalation, transport, and deposition in a human upper airway model. AEROSOL SCIENCE AND TECHNOLOGY, 38(1), 36–49. https://doi.org/10.1080/02786820490247597 Kiefer, S., Silverberg, L., & Gonzalez, M. (2004). A case study of prototyping methods and design for manufacture: electrostatic window blinds. JOURNAL OF ENGINEERING DESIGN, 15(1), 91–106. https://doi.org/10.1080/0954482021000050820 Wan, Q., & Kuznetsov, A. V. (2004). Streaming in a channel bounded by an ultrasonically oscillating beam and its cooling efficiency. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 45(1), 21–47. https://doi.org/10.1080/1040778049026739 Silverberg, L., & Farmer, D. (2004). Transpermanent magnetic actuation for spacecraft pointing, shape control, and deployment. JOURNAL OF SPACECRAFT AND ROCKETS, 41(6), 1051–1055. https://doi.org/10.2514/1.1350 Hardin, C. W., Shih, A. J., & Lemaster, R. L. (2004). Diamond wire machining of wood. Forest Products Journal, 54(11), 50–55. Koo, J., & Kleinstreuer, C. (2004). Viscous dissipation effects in microtubes and microchannels. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 47(14-16), 3159–3169. https://doi.org/10.1016/j.ijheatmasstransfer.2004.02.017 Lu, B., & Wu, F. (2004). Switching LPV control designs using multiple parameter-dependent Lyapunov functions. Automatica, 40(11), 1973–1980. https://doi.org/10.1016/j.automatica.2004.06.011 Tafreshi, H. V., & Pourdeyhimi, B. (2004). Simulating cavitation and hydraulic flip inside hydroentangling nozzles. Textile Research Journal, 74(4), 359–364. https://doi.org/10.1177/004051750407400413 Sheikh-Ahmad, J. Y., Quarless, V., & Bailey, J. A. (2004). On the role of microcracks on flow instability in low speed machining of CP titanium. MACHINING SCIENCE AND TECHNOLOGY, 8(3), 415–430. https://doi.org/10.1081/LMST-200039867 Echekki, T. (2004). Numerical investigation of buoyancy effects on triple flame stability. COMBUSTION SCIENCE AND TECHNOLOGY, 176(3), 381–407. https://doi.org/10.1080/00102200490270120 Studer, M., & Peters, K. (2004). Multi-scale sensing for damage identification. SMART MATERIALS AND STRUCTURES, 13(2), 283–294. https://doi.org/10.1088/0964-1726/13/2/006 Gill, A., Peters, K., & Studer, M. (2004). Genetic algorithm for the reconstruction of Bragg grating sensor strain profiles. MEASUREMENT SCIENCE AND TECHNOLOGY, 15(9), 1877–1884. https://doi.org/10.1088/0957-0233/15/9/027 Begenir, A., Tafreshi, H. V., & Pourdeyhimi, B. (2004). Effect of nozzle geometry on hydroentangling water jets: Experimental observations. TEXTILE RESEARCH JOURNAL, 74(2), 178–184. https://doi.org/10.1177/004051750407400215 Baucom, J. N., Zikry, M. A., & Qiu, Y. (2004). Dynamic and quasi-static failure evolution of 3D woven cellular composite systems. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 23(5), 471–481. https://doi.org/10.1177/0731684404032076 Marley, S. K., Welle, E. J., & Lyons, K. M. (2004). Combustion structures in lifted ethanol spray flames. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 126(2), 254–257. https://doi.org/10.1115/1.1688768 Zhang, Z., & Kleinstreuer, C. (2004). Airflow structures and nano-particle deposition in a human upper airway model. JOURNAL OF COMPUTATIONAL PHYSICS, 198(1), 178–210. https://doi.org/10.1016/j.jcp.2003.11.034 Bakkal, M., Shih, A. J., Scattergood, R. O., & Liu, C. T. (2004). Machining of a Zr-Ti-Al-Cu-Ni metallic glass. SCRIPTA MATERIALIA, 50(5), 583–588. https://doi.org/10.1016/j.scriptamat.2003.11.052