Mechanical and Aerospace Engineering - 2006 Ekkad, S. V. (2006). Calculation of Convective Heat Transfer Coefficient Using a Semi-infinite Solid Assumption. In M. Kutz (Ed.), Heat-transfer calculations. McGraw-Hill. Shin, J., Narayanaswamy, V., Raja, L. L., & Clemens, N. (2006). Generation of plasma induced flow actuation by DC glow-like discharge in a supersonic flow. Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting, 3, 2042–2051. https://doi.org/10.2514/6.2006-169 Esposito, E., & Ekkad, S. V. (2006). Jet impingement heat transfer visualization using a steady state liquid crystal method. Journal of Heat Transfer, 128(8), 738. https://doi.org/10.1115/1.2221301 Lu, Y., & Ekkad, S. V. (2006). Film cooling predictions for cratered cylindrical inclined holes. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. https://doi.org/10.1115/IMECE2006-14406 Lu, Y., Nasir, H., Faucheaux, D., & Ekkad, S. V. (2006). Film cooling measurements for novel hole configurations. Journal of Heat Transfer, 128(8), 737. https://doi.org/10.1115/1.2221300 Esposito, E. I., Ekkad, S. V., Dutta, P., Kim, Y., & Greenwood, S. (2006). Corrugated wall jet impingement geometry for combustor liner backside cooling. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. https://doi.org/10.1115/IMECE2006-13300 Lu, Y., & Ekkad, S. V. (2006). Predictions of film cooling from cylindrical holes embedded in trenches. Collection of Technical Papers - 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference Proceedings, 2, 1361–1369. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33845532553&partnerID=MN8TOARS Lu, Y., Allison, D., & Ekkad, S. V. (2006). Influence of hole angle and shaping on leading edge showerhead film cooling. Proceedings of the ASME Turbo Expo, 3 PART A, 375–382. https://doi.org/10.1115/GT2006-90370 Ekkad, S. V., Ou, S., & Rivir, R. B. (2006). Effect of jet pulsation and duty cycle on film cooling from a single jet on a leading edge model. Journal of Turbomachinery, 128(3), 564–571. https://doi.org/10.1115/1.2185122 Pourdeyhimi, B., Mazé, B., & Tafreshi, H. V. (2006). Simulation and Analysis of Unbonded Nonwoven Fibrous Structures. Journal of Engineered Fibers and Fabrics, 1(2), 155892500600100. https://doi.org/10.1177/155892500600100204 Shi, J., Zikry, M., & Hatem, T. M. (2006). Inelastic behavior and grain-boundary effects in polycrystalline materials. Materials Research Society Symposium Proceedings, 978, 333–338. https://doi.org/10.1557/proc-978-0978-gg12-07-ee08-07 Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact using fiber bragg grating sensors. Proceedings of SPIE - The International Society for Optical Engineering, 6174 II. https://doi.org/10.1117/12.657989 Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural behavior and failure of FCC crystalline aggregates. Materials Research Society Symposium Proceedings, 976, 78–83. https://doi.org/10.1557/proc-976-0976-ee02-02 Zhao, W., Duscher, G., Zikry, M. A., & Rozgonyi, G. (2006). Local strain characterization on strained-Si/SiGe heterostructures with convergent beam electron diffraction and finite element simulation. ECS Transactions, 3(7), 333–338. https://doi.org/10.1149/1.2355831 Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2006). In-situ failure identification in woven composites throughout impact. American Society of Mechanical Engineers, Materials Division (Publication) MD. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84920632313&partnerID=MN8TOARS Pearson, J. D., Zikry, M. A., & Rezvanian, O. (2006). Computational modeling and design of adaptive thin-film composite coatings. Materials Research Society Symposium Proceedings, 977, 85–90. https://doi.org/10.1557/proc-977-0977-ff08-10 Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006, May 8). Nanoparticle Filtration by Virtual Nonwoven Media. Presented at the American Filtration & Separations Society, Chicago, Illinois. Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Predicting Inlet Roundness of Hydroentangling Nozzles Using CFD Simulations. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas. Zobel, S., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Permeability of Highly Dense Nonwoven Fabrics. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas. Anantharamaiah, N., Roempert, K., Tafreshi, H. V., & Pourdeyhimi, B. (2006). The Role of Waterjet Curtain in Modifying the Jet Streaks in Hydroentangling. International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas. Anantharamaiah, N., Roempert, K., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Hydroentangling - A Path to Technical Nonwovens. TechTextil. Presented at the TechTextil, Atlanta, Georgia. Vahedi Tafreshi, H., Piseri, P., Benedek, G., & Milani, P. (2006). The role of gas dynamics in operation conditions of a puised microplasma cluster source for nanostructured thin films deposition. Journal of Nanoscience and Nanotechnology, 6(4), 1140–1149. https://doi.org/10.1166/jnn.2006.139 Latifi, M., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2006). Fiber dispersion in wet-lay mixing tanks. International Nonwovens Technical Conference, INTC 2006, 384–389. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-36049022222&partnerID=MN8TOARS Wang, Q., Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2006). Approaches for predicting collation efficiency of fibrous filters. Journal of Textile and Apparel, Technology and Management, 5(2). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33749549286&partnerID=MN8TOARS Ngaile, G., Stark, D., & Cochran, J. (2006). Development of Polymeric Based Lubricant for Cold Forging Processes. Transaction of the North American Manufacturing Research Institution of SME, 34, 563–570. Kota, A. K., Anand, G., Ramakrishnan, S., Regel, L. L., & Wilcox, W. R. (2006). Influence of oxygen, hydrogen, helium, argon and vacuum on the surface behavior of molten InSb, other semiconductors, and metals on silica. Journal of Crystal Growth, 290(2), 319–333. https://doi.org/10.1016/j.jcrysgro.2006.01.044 Eischen, J. W. (2006). A Study of the Relationship Between Buckling and Wrinkling of Membranes. Proceedings of the Ninth Pan American Congress of Applied Mechanics. Presented at the Ninth Pan American Congress of Applied Mechanics, Merida, Yucatan, Mexico. Xu, C., & Shin, Y. C. (2006). A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis. Presented at the 3rd International Conference on Cybernetics and Information Technologies Systems and Applications, Orlando, FL. Xu, C., & Shin, Y. C. (2006). Adaptive Control of Cutting Force for End Milling Processes with System Variation using Self-tuning Fuzzy Technique. Presented at the ASME International Mechanical Engineering Congress and Exposition, Chicago, IL. Reyhanoglu, M., & Bommer, A. (2006). Tracking Control of an Underactuated Autonomous Surface Vessel Using Switched Feedback. Proceedings of IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. Presented at the IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics, Paris, France. https://doi.org/10.1109/iecon.2006.347539 O’Connor, B., An, K. H., Pipe, K. P., Zhao, Y., & Shtein, M. (2006). Enhanced optical field intensity distribution in organic photovoltaic devices using external coatings. Applied Physics Letters, 89(23), 233502. https://doi.org/10.1063/1.2399937 Fang, T., & Lee, C.-F. F. (2006). Exact solutions of incompressible Couette flow with porous walls for slightly rarefied gases. Heat and Mass Transfer/Waerme- Und Stoffuebertragung, 42(3), 255–262. https://doi.org/10.1007/s00231-005-0009-2 Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2006). Combustion and soot visualization of Low Temperature Combustion within an HSDI diesel engine using multiple injection strategy. SAE Technical Papers. https://doi.org/10.4271/2006-01-0078 Wang, R. C., Fang, T., & Lee, C.-F. F. (2006). Comparisons of computed and measured results for a HSDI diesel engine operating under HCCI mode. SAE Technical Papers. https://doi.org/10.4271/2006-01-1519 Zhu, Y., Corigliano, A., & Espinosa, H. D. (2006). A thermal actuator for nanoscale in situ microscopy testing: design and characterization. Journal of Micromechanics and Microengineering, 16(2), 242–253. https://doi.org/10.1088/0960-1317/16/2/008 Holzbaur, K. R. S., Delp, S. L., & Murray, W. M. (2006). Moment-generating capacity of upper limb muscles. Journal of Biomechanics, 39, S85. https://doi.org/10.1016/S0021-9290(06)83233-1 Holzbaur, K. R. S., Gold, G. E., Johanson, M. E., & Murray, W. M. (2006). MRI-based estimation of muscle volume and length following tendon transfer surgery. Journal of Biomechanics, 39, S84. https://doi.org/10.1016/S0021-9290(06)83227-6 Reyhanoglu, M., & Geluk, T. (2006). Switched Feedback Tracking Control of a Nonholonomic Mobile Robot. IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. Presented at the IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics. https://doi.org/10.1109/iecon.2006.347507 Reyhanoglu, M., & van de Loo, J. (2006). State Feedback Tracking of a Nonholonomic Control Moment Gyroscope. Proceedings of the 45th IEEE Conference on Decision and Control. Presented at the Proceedings of the 45th IEEE Conference on Decision and Control. https://doi.org/10.1109/cdc.2006.377590 Reyhanoglu, M., & De Loo, J. (2006). Rest-to-rest Maneuvering of a Nonholonomic Control Moment Gyroscope. 2006 IEEE International Symposium on Industrial Electronics. Presented at the 2006 IEEE International Symposium on Industrial Electronics. https://doi.org/10.1109/isie.2006.295585 Vermillion, C., Sun, J., Butts, K., & Hall, A. (2006). Modeling and Analysis of a Thermal Management System for Engine Calibration. 2006 IEEE International Conference on Control Applications. Presented at the 2006 IEEE International Conference on Control Applications. https://doi.org/10.1109/cca.2006.286181 Muller, M., Moilanen, P., Bosisio, M., Mitton, D., & Talmant, M. (2006). Comparison of ultrasonic axial transmission and pQCT parameters to bone mechanical properties in vitro. Journal of Biomechanics, 39, S452. https://doi.org/10.1016/S0021-9290(06)84849-9 Muller, M., D'Hanens, A., Mitton, D., Talmant, M., Johnson, P., & Laugier, P. (2006). Fatigue damage in cortical bone detected using nonlinear ultrasound. Journal of Biomechanics, 39, S8. https://doi.org/10.1016/S0021-9290(06)82896-4 Muller, M., Tencate, J. A., Darling, T. W., Sutin, A., Guyer, R. A., Talmant, M., … Johnson, P. A. (2006). Bone micro-damage assessment using non-linear resonant ultrasound spectroscopy (NRUS) techniques: A feasibility study. Ultrasonics, 44, e245–e249. https://doi.org/10.1016/j.ultras.2006.06.043 An, K. H., O’Connor, B., Pipe, K. P., Zhao, Y., & Shtein, M. (2006). Organic light-emitting device on a scanning probe cantilever. Applied Physics Letters, 89(11), 111117. https://doi.org/10.1063/1.2353816 Fang, T., Guo, F., & Lee, C.-fon F. (2006). A note on the extended Blasius equation. Applied Mathematics Letters, 19(7), 613–617. https://doi.org/10.1016/j.aml.2005.08.010 Fang, T., Guo, F., & Lee, C.-fon F. (2006). A new iteration method with cubic convergence to solve nonlinear algebraic equations. Applied Mathematics and Computation, 175(2), 1147–1155. https://doi.org/10.1016/j.amc.2005.08.020 Li, Z., & Kleinstreuer, C. (2006). Effects of blood flow and vessel geometry on wall stress and rupture risk of abdominal aortic aneurysms. Journal of Medical Engineering & Technology, 30(5), 283–297. https://doi.org/10.1080/03091900500217406 Kowalski, M. P., Heilmann, R. K., Schattenburg, M. L., Chang, C.-H., Berendse, F. B., & Hunter, W. R. (2006). Near-normal-incidence extreme-ultraviolet efficiency of a flat crystalline anisotropically etched blazed grating. Applied Optics, 45(8), 1676. https://doi.org/10.1364/ao.45.001676 Seely, J. F., Goray, L. I., Kjornrattanawanich, B., Laming, J. M., Holland, G. E., Flanagan, K. A., … Rasmussen, A. P. (2006). Efficiency of a grazing-incidence off-plane grating in the soft-x-ray region. Applied Optics, 45(8), 1680. https://doi.org/10.1364/ao.45.001680 Chang, C.-H., Akilian, M., & Schattenburg, M. L. (2006). Describing isotropic and anisotropic out-of-plane deformations in thin cubic materials by use of Zernike polynomials. Applied Optics, 45(3), 432. https://doi.org/10.1364/ao.45.000432 Xu, C., & Shin, Y. C. (2006). An adaptive fuzzy controller for constant cutting force in end-milling processes. American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC. https://doi.org/10.1115/IMECE2006-13758 Luo, H., Baum, J. D., & Lohner, R. (2006). A p-multigrid discontinuous Galerkin method for the Euler equations on unstructured grids. JOURNAL OF COMPUTATIONAL PHYSICS, 211(2), 767–783. https://doi.org/10.1016/j.jcp.2005.06.019 Luo, H., Baum, J. D., & Lohner, R. (2006). A hybrid Cartesian grid and gridless method for compressible flows. JOURNAL OF COMPUTATIONAL PHYSICS, 214(2), 618–632. https://doi.org/10.1016/j.jcp.2005.10.002 Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2006, October). Reply on the comments on "Initiation of pulsed corona discharge under Supercritical conditions" by C. H. Zhang, J. M. K. MacAlpine, and H. Akiyama. IEEE TRANSACTIONS ON PLASMA SCIENCE, Vol. 34, pp. 2467–2468. https://doi.org/10.1109/tps.2006.883368 Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2006). Methanol and dimethyl sulfide removal by pulsed corona part I: Experiment. PLASMA CHEMISTRY AND PLASMA PROCESSING, 26(6), 527–542. https://doi.org/10.1007/s11090-006-9011-9 Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2006). Flame synthesis of molybdenum oxide whiskers. CHEMICAL PHYSICS LETTERS, 422(1-3), 72–77. https://doi.org/10.1016/j.cplett.2006.02.040 Merchan-Merchan, W., Saveliev, A. V., & Kennedy, L. A. (2006). Flame nanotube synthesis in moderate electric fields: From alignment and growth rate effects to structural variations and branching phenomena. CARBON, 44(15), 3308–3314. https://doi.org/10.1016/j.carbon.2006.06.025 David Merryman, W., Shadow Huang, H.-Y., Schoen, F. J., & Sacks, M. S. (2006). The effects of cellular contraction on aortic valve leaflet flexural stiffness. Journal of Biomechanics, 39(1), 88–96. https://doi.org/10.1016/j.jbiomech.2004.11.008 Huang, H.-Y. S., & Sacks, M. S. (2006). Geometric changes in heart valve interstitial cell nuclei with transvalvular pressure. 5th World Congress of Biomechanics, Munich, Germany, July 29-August 4, 2006, 5640. Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). Numerical simulation of the formation of constricted waterjets in hydroentangling nozzles - Effects of nozzle geometry. CHEMICAL ENGINEERING RESEARCH & DESIGN, 84(A3), 231–238. https://doi.org/10.1205/cherd.05077 Inaudi, D., Ecke, W., Culshaw, B., Peters, K. J., & Udd, E. (2006). Smart structures and materials 2006: Smart sensor monitoring systems and applications (SPIE; 6167). Bellingham, Wash.: SPIE. Avramenko, A. A., & Kuznetsov, A. V. (2006). The onset of convection in a suspension of gyrotactic microorganisms in superimposed fluid and porous layers: Effect of vertical throughflow. TRANSPORT IN POROUS MEDIA, 65(2), 159–176. https://doi.org/10.1007/s11242-005-6086-3 Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A note on permeability simulation of multifilament woven fabrics. CHEMICAL ENGINEERING SCIENCE, 61(24), 8085–8088. https://doi.org/10.1016/j.ces.2006.09.043 Cengel, Y. A., & Boles, M. A. (2006). Thermodynamics: an engineering approach. (5th ed.). Boston: McGraw-Hill Higher Education. Wang, L., Fritts, D. C., & Tolson, R. H. (2006). Nonmigrating tides inferred from the Mars Odyssey and Mars Global Surveyor aerobraking data. Geophysical Research Letters, 33(23). Kuznetsov, A. V. (2006). Thermo-bio-convection in porous media. JOURNAL OF POROUS MEDIA, 9(6), 581–589. https://doi.org/10.1615/JPorMedia.v9.i6.60 Kuznetsov, A. V., & Nield, D. A. (2006). Thermally developing forced convection in a bidisperse porous medium. Journal of Porous Media, 9(5), 393–402. https://doi.org/10.1615/jpormedia.v9.i5.10 Lu, B., & Wu, F. (2006). Probabilistic robust linear parameter-varying control of an F-16 aircraft. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 29(6), 1454–1460. https://doi.org/10.2514/1.22495 Wu, C., Mosher, B. P., & Zeng, T. (2006). One-step green route to narrowly dispersed copper nanocrystals. JOURNAL OF NANOPARTICLE RESEARCH, 8(6), 965–969. https://doi.org/10.1007/s11051-005-9065-2 Ranganath, B., & Echekki, T. (2006). On the role of heat and mass transport during the mutual annihilation of two premixed propane-air flames. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(25-26), 5075–5080. https://doi.org/10.1016/j.ijheatmasstransfer.2006.05.029 Kuznetsov, A. V. (2006). Linear stability analysis of the effect of vertical vibration on bioconvection in a horizontal porous layer of finite depth. JOURNAL OF POROUS MEDIA, 9(6), 597–608. https://doi.org/10.1615/JPorMedia.v9.i6.80 Wegner, K., Piseri, P., Tafreshi, H. V., & Milani, P. (2006). [Review of Cluster beam deposition: a tool for nanoscale science and technology]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 39(22), R439–R459. https://doi.org/10.1088/0022-3727/39/22/r02 Kuznetsov, A. V., & Nield, D. A. (2006). Boundary layer treatment of forced convection over a wedge with an attached porous substrate. Journal of Porous Media, 9(7), 683–694. https://doi.org/10.1615/jpormedia.v9.i7.70 Fritts, D. C., Wang, L., & Tolson, R. H. (2006). Mean and gravity wave structures and variability in the Mars upper atmosphere inferred from Mars Global Surveyor and Mars Odyssey aerobraking densities. Journal of Geophysical Research. Space Physics, 111(A12), A12304. Pandurangan, P., & Buckner, G. D. (2006). Vibration analysis for damage detection in metal-to-metal adhesive joints. EXPERIMENTAL MECHANICS, 46(5), 601–607. https://doi.org/10.1007/s11340-006-8736-y Narayan, R. J., Hobbs, L. W., Jin, C., & Rabiei, A. (2006). The use of functionally gradient materials in medicine. JOM, 58(7), 52–56. https://doi.org/10.1007/s11837-006-0142-5 Nield, D. A., & Kuznetsov, A. V. (2006). The onset of convection in a bidisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(17-18), 3068–3074. https://doi.org/10.1016/j.ijheatmasstransfer.2006.02.008 Ma, N., & Walker, J. S. (2006). Strong-field electromagnetic stirring in the vertical gradient freeze process with a submerged heater. JOURNAL OF CRYSTAL GROWTH, 291(1), 249–257. https://doi.org/10.1016/j.jcrysgro.2006.02.041 Wu, C., Mosher, B. P., & Zeng, T. (2006). Rapid synthesis of gold and platinum nanoparticles using metal displacement reduction with sonomechanical assistance. CHEMISTRY OF MATERIALS, 18(13), 2925–2928. https://doi.org/10.1021/cm052400x Rabiei, A., Vendra, L., Reese, N., Young, N., & Neville, B. P. (2006, September). Processing and characterization of a new composite metal foam. MATERIALS TRANSACTIONS, Vol. 47, pp. 2148–2153. https://doi.org/10.2320/matertrans.47.2148 Wang, X., Ma, N., Bliss, D. F., Iseler, G. W., & Becla, P. (2006). Parametric study of modified vertical bridgman growth in a rotating magnetic field. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 20(3), 384–388. https://doi.org/10.2514/1.19572 Ranganath, B., & Echekki, T. (2006). One-Dimensional Turbulence-based closure for turbulent non-premixed flames. PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 6(7), 409–418. https://doi.org/10.1504/PCFD.2006.010966 Kameda, T., Zikry, M. A., & Rajendran, A. M. (2006). Modeling of grain-boundary effects and intergranular and transgranular failure in polycrystalline intermetallics. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(7), 2107–2115. https://doi.org/10.1007/BF02586131 Lee, J. W., Thomas, B., & Rabiei, A. (2006). Microstructural study of titanium-palladium-nickel base thin film shape memory alloys. THIN SOLID FILMS, 500(1-2), 309–315. https://doi.org/10.1016/j.tsf.2005.11.027 Shi, H., Kleinstreuer, C., & Zhang, Z. (2006). Laminar airflow and nanoparticle or vapor deposition in a human nasal cavity model. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(5), 697–706. https://doi.org/10.1115/1.2244574 Chitrphiromsri, P., Kuznetsov, A. V., Song, G., & Barker, R. L. (2006). Investigation of feasibility of developing intelligent firefighter-protective garments based on the utilization of a water-injection system. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 49(5), 427–450. https://doi.org/10.1080/10407780500359869 Dow, T. A. (2006). Friction clutches. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill. Dow, T. A. (2006). Friction brakes. In H. A. Rothbart & T. H. Brown Jr. (Eds.), Mechanical design handbook: measurement, analysis, and control of dynamic sysytems. New York, NY: McGraw-Hill. Li, Z., & Kleinstreuer, C. (2006). Computational analysis of type II endoleaks in a stented abdominal aortic aneurysm model. JOURNAL OF BIOMECHANICS, 39(14), 2573–2582. https://doi.org/10.1016/j.jbiomech.2005.09.002 Tran, C. M., & Southward, S. C. (2006). A sensor placement strategy for the hybrid adaptive feedforward observer. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 128(2), 449–452. https://doi.org/10.1115/1.2196421 Xiao, X., Edwards, JR, Hassan, H. A., & Cutler, A. D. (2006, March). Variable turbulent Schmidt-number formulation for scramjet applications. AIAA JOURNAL, Vol. 44, pp. 593–599. https://doi.org/10.2514/1.15450 Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052 Baldwin, E., Thomas, B., Lee, J. W., & Rabiei, A. (2006). Residual stresses in TiPdNi base thin film shape memory alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 434(1-2), 124–130. https://doi.org/10.1016/j.msea.2006.06.123 Kuznetsov, A. V., & Xiang, P. (2006). Numerical investigation of thinning of the intercellular bridge during cell cytokinesis. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 33(9), 1071–1078. https://doi.org/10.1016/j.icheatmasstransfer.2006.05.005 Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2006). Microstructural modeling of grain subdivision and large strain inhomogeneous deformation modes in f.c.c. crystalline materials. MECHANICS OF MATERIALS, 38(12), 1159–1169. https://doi.org/10.1016/j.mechmat.2005.12.006 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Isotonic and hypertonic saline droplet deposition in a human upper airway model. JOURNAL OF AEROSOL MEDICINE-DEPOSITION CLEARANCE AND EFFECTS IN THE LUNG, 19(2), 184–198. https://doi.org/10.1089/jam.2006.19.184 Kuznetsov, A. V., & Nield, D. A. (2006). Forced convection with laminar pulsating flow in a saturated porous channel or tube. TRANSPORT IN POROUS MEDIA, 65(3), 505–523. https://doi.org/10.1007/s11242-006-6791-6 Prabhugoud, M., & Peters, K. (2006). Finite element model for embedded fiber Bragg grating sensor. SMART MATERIALS AND STRUCTURES, 15(2), 550–562. https://doi.org/10.1088/0964-1726/15/2/038 Buckner, G. D., Choi, H., & Gibson, N. S. (2006). Estimating model uncertainty using confidence interval networks: Applications to robust control. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 128(3), 626–635. https://doi.org/10.1115/1.2199855 Ma, N., & Walker, J. S. (2006). Electromagnetic stirring in crystal growth processes. Fluid Dynamics & Materials Processing : FDMP, 2(2), 119–125. Wang, X., Ma, N., Bliss, D. F., Iseler, G. W., & Becla, P. (2006, January 25). Comparing modified vertical gradient freezing with rotating magnetic fields or with steady magnetic and electric fields. JOURNAL OF CRYSTAL GROWTH, Vol. 287, pp. 270–274. https://doi.org/10.1016/j.jcrysgro.2005.11.036 Kuznetsov, A. V. (2006). The onset of thermo-bioconvection in a shallow fluid saturated porous layer heated from below in a suspension of oxytactic microorganisms. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 25(2), 223–233. https://doi.org/10.1016/j.euromechflu.2005.06.003 Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2006). Solute segregation during modified vertical gradient freezing of alloyed compound semiconductor crystals with magnetic and electric fields. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49(19-20), 3429–3438. https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.008 Altan, T., Jain, N. T., Shi, XX, Ngaile, G., Pax, B., Harman, B., & Homan, G. (2006). Progressive die sequence design for deep drawing round cups using finite element analysis. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 366–369. https://doi.org/10.1115/1.2039942 Mosher, B. P., Wu, C., Sun, T., & Zeng, T. (2006). Particle-reinforced water-based organic-inorganic nanocomposite coatings for tailored applications. JOURNAL OF NON-CRYSTALLINE SOLIDS, 352(30-31), 3295–3301. https://doi.org/10.1016/j.jnoncrysol.2006.05.026 Star, A. M., Edwards, J. R., Lin, K.-C., Cox-Stouffer, S., & Jackson, T. A. (2006). Numerical simulation of injection of supercritical ethylene into nitrogen. JOURNAL OF PROPULSION AND POWER, Vol. 22, pp. 809–819. https://doi.org/10.2514/1.16621 Baucom, J. N., Zikry, M. A., & Rajendran, A. M. (2006). Low-velocity impact damage accumulation in woven S2-glass composite systems. COMPOSITES SCIENCE AND TECHNOLOGY, 66(10), 1229–1238. https://doi.org/10.1016/j.compscitech.2005.11.005 Ramasubramanian, M. K., Madanshetty, S. I., & Suwan-Acksorn, P. (2006). Characterization of focused high frequency ultrasonic, removal of thermally fused toner from paper surfaces - an experimental study. Appita Journal, 59(4), 306-. Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A study on flow through hydroentangling nozzles and their degradation. CHEMICAL ENGINEERING SCIENCE, 61(14), 4582–4594. https://doi.org/10.1016/j.ces.2006.01.038 Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A case study of simulating submicron aerosol filtration via lightweight spun-bonded filter media. CHEMICAL ENGINEERING SCIENCE, 61(15), 4871–4883. https://doi.org/10.1016/j.ces.2006.03.039 Terry, S. D., & Lyons, K. M. (2006). Turbulent lifted flames in the hysteresis regime and the effects of coflow. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 128(4), 319–324. https://doi.org/10.1115/1.2358147 Nield, D. A., & Kuznetsov, A. V. (2006). The onset of bio-thermal convection in a suspension of gyrotactic microorganisms in a fluid layer: Oscillatory convection. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 45(10), 990–997. https://doi.org/10.1016/j.ijthermalsci.2006.01.007 Mukherjee, R., & Gopalarathnam, A. (2006). Poststall Prediction of Multiple-Lifting-Surface Configurations Using a Decambering Approach. Journal of Aircraft, 43(3), 660–668. https://doi.org/10.2514/1.15149 Becker, S. M., & Kuznetsov, A. V. (2006). Numerical modeling of in vivo plate electroporation thermal dose assessment. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 76–84. https://doi.org/10.1115/1.2132375 Sweet, A. L., & Tu, J. F. (2006). Evaluating tolerances and process capability when using truncated probability density functions. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 44(17), 3493–3508. https://doi.org/10.1080/00207540500521576 Ngaile, G., Gariety, M., & Altan, T. (2006). Enhancing tribological conditions in tube hydroforming by using textured tubes. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 128(3), 674–676. https://doi.org/10.1115/1.2197849 Li, Z., & Kleinstreuer, C. (2006). Effects of major endoleaks on a stented abdominal aortic aneurysm. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(1), 59–68. https://doi.org/10.1115/1.2132376 Geng, P., & Kuznetsov, A. V. (2006). Direct numerical simulation of settling of a large solid particle during bioconvection. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 51(5), 511–530. https://doi.org/10.1002/fld.1125 Kolera-Gokula, H., & Echekki, T. (2006). Direct numerical simulation of premixed flame kernel-vortex interactions in hydrogen-air mixtures. COMBUSTION AND FLAME, 146(1-2), 155–167. https://doi.org/10.1016/j.combustflame.2006.04.002 Nojavan, S., & Yuan, F.-G. (2006). Damage imaging of reinforced concrete structures using electromagnetic migration algorithm. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 43(18-19), 5886–5908. https://doi.org/10.1016/j.ijsolstr.2005.08.017 Tafreshi, H. V., Ercan, E., & Pourdeyhimi, B. (2006). Calculating mass transfer from vertical wet fabrics using a free convection heat transfer correlation. HEAT AND MASS TRANSFER, 42(9), 767–769. https://doi.org/10.1007/s00231-005-0050-1 Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2006). A study on hydroentangling waterjets and their impact forces. EXPERIMENTS IN FLUIDS, 41(1), 103–113. https://doi.org/10.1007/s00348-006-0162-5 Yan, J., & Strenkowski, J. S. (2006). A finite element analysis of orthogonal rubber cutting. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 174(1-3), 102–108. https://doi.org/10.1016/j.jmatprotec.2005.02.265 Uner, B., Ramasubramanian, M. K., Zauscher, S., & Kadla, J. F. (2006). Adhesion interactions between poly(vinyl alcohol) and iron-oxide surfaces: The effect of acetylation. JOURNAL OF APPLIED POLYMER SCIENCE, 99(6), 3528–3534. https://doi.org/10.1002/app.22980 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Water vapor transport and its effects on the deposition of hygroscopic droplets in a human upper airway model. AEROSOL SCIENCE AND TECHNOLOGY, 40(1), 1–16. https://doi.org/10.1080/02786820500461154 Mao, D. M., Edwards, JR, & Harvey, A. (2006). Prediction of foam growth and its nucleation in free and limited expansion. CHEMICAL ENGINEERING SCIENCE, 61(6), 1836–1845. https://doi.org/10.1016/j.ces.2005.07.026 Li, Z., & Kleinstreuer, C. (2006). Analysis of biomechanical factors affecting stent-graft migration in an abdominal aortic aneurysm model. JOURNAL OF BIOMECHANICS, 39(12), 2264–2273. https://doi.org/10.1016/j.jbiomech.2005.07.010 Smith, R. C., Seelecke, S., Dapino, M., & Ounaies, Z. (2006). A unified framework for modeling hysteresis in ferroic materials. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 54(1), 46–85. https://doi.org/10.1016/j.jmps.2005.08.006 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2006). Transport and uptake of MTBE and ethanol vapors in a human upper airway model. INHALATION TOXICOLOGY, 18(3), 169–184. https://doi.org/10.1080/08958370500434172 Danby, S. J., & Echekki, T. (2006). Proper orthogonal decomposition analysis of autoignition simulation data of nonhomogeneous hydrogen-air mixtures. COMBUSTION AND FLAME, 144(1-2), 126–138. https://doi.org/10.1016/j.combustflame.2005.06.014 Rajendran, A. M., Ashmawi, W. M., & Zikry, M. A. (2006). The modeling of the shock response of powdered ceramic materials. COMPUTATIONAL MECHANICS, 38(1), 1–13. https://doi.org/10.1007/s00466-005-0712-3 Lawrence, B. M., Buckner, G. D., & Mirka, G. A. (2006). An adaptive system identification model of the biomechanical response of the human trunk during sudden loading. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 128(2), 235–241. https://doi.org/10.1115/1.2165696 Rabiei, A., Thomas, B., Jin, C., Narayan, R., Cuomo, J., Yang, Y., & Ong, J. L. (2006). A study on functionally graded HA coatings processed using ion beam assisted deposition with in situ heat treatment. SURFACE & COATINGS TECHNOLOGY, 200(20-21), 6111–6116. https://doi.org/10.1016/j.surfcoat.2005.09.027 Zeng, T. F. (2006). Thermionic-tunneling multilayer nanostructures for power generation. APPLIED PHYSICS LETTERS, 88(15). https://doi.org/10.1063/1.2192973 Nakkiew, W., Lin, C.-W., & Tu, J. F. (2006). A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 46(7-8), 877–889. https://doi.org/10.1016/j.ijmachtools.2005.04.021 Kuznetsov, A. V. (2006). Investigation of the onset of bioconvection in a suspension of oxytactic microorganisms subjected to high-frequency vertical vibration. THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 20(2), 73–87. https://doi.org/10.1007/s00162-006-0007-0 Lee, K. L., & Soh, A. K. (2006). Effects of electric fatigue on piezoelectric ceramics. In Fracture and strength of solids, proceedings of the Sixth International Conference on Fracture & Strength of Solids (Key engineering materials; 306-308) (Vol. 306-308, pp. 91–96). Wang, X., & Ma, N. (2006). Bridgman-Stockbarger growth of binary alloyed semiconductor crystals with steady magnetic fields. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 20(2), 313–319. https://doi.org/10.2514/1.15584 Nield, D. A., & Kuznetsov, A. V. (2006). Forced convection with slip-flow in a channel or duct occupied by a hyper-porous medium saturated by a rarefied gas. TRANSPORT IN POROUS MEDIA, 64(2), 161–170. https://doi.org/10.1007/s11242-005-2341-x Kuznetsov, A. V. (2006). Optimization problems for bioheat equation. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 33(5), 537–543. https://doi.org/10.1016/j.icheatmasstransfer.2006.01.012 Berry, T. L., & Roberts, W. L. (2006). Measurement of smoke point in velocity-matched coflow laminar diffusion flames with pure fuels at elevated pressures. COMBUSTION AND FLAME, 145(3), 571–578. https://doi.org/10.1016/j.combustflame.2005.12.010 Neaves, M. D., & Edwards, JR. (2006). All-speed time-accurate underwater projectile calculations using a preconditioning algorithm. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 128(2), 284–296. https://doi.org/10.1115/1.2169816 Avramenko, A. A., & Kuznetsov, A. V. (2006). Renormalization group model of large-scale turbulence in porous media. TRANSPORT IN POROUS MEDIA, 63(1), 175–193. https://doi.org/10.1007/s11242-005-4425-z Wu, F., & Dong, K. (2006). Gain-scheduling control of LFT systems using parameter-dependent Lyapunov functions. AUTOMATICA, 42(1), 39–50. https://doi.org/10.1016/j.automatica.2005.08.020