Mechanical and Aerospace Engineering - 2011 Real-time MRI-Guided Needle Placement Robot with Integrated Fiber Optic Force Sensing. (2011). IEEE International Conference on Robotics and Automation. https://doi.org/10.1109/ICRA.2011.5979539 An Affordable Compact Humanoid Robot for Autism Spectrum Disorder Interventions in Children. (2011). Annual International Conference of the IEEE Engineering in Medicine and Biology. https://doi.org/10.1109/IEMBS.2011.6091316 Guo, X., Zhao, H., Song, H., Combs, C., Narayanaswamy, V., Clemens, N., … Jiang, H. (2011). Upconverting nanophosphors for high temperature applications. Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011, 1, 429–432. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-81455133723&partnerID=MN8TOARS Narayanaswamy, V., Burns, R., & Clemens, N. T. (2011). Kr-PLIF for scalar imaging in supersonic flows. Optics Letters, 36(21), 4185–4187. https://doi.org/10.1364/OL.36.004185 Roy, A., Ekkad, S. V., & Vandsburger, U. (2011). Prediction and validation of performance of an entrained flow gasifier model. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 4(PARTS A AND B), 1609–1617. https://doi.org/10.1115/imece2011-63770 Narzary, D. P., LeBlanc, C., & Ekkad, S. (2011). Film-cooling performance of anti-vortex hole on a flat plate. ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. https://doi.org/10.1115/ajtec2011-44161 Patil, S., Abraham, S., Tafti, D., Ekkad, S., Kim, Y., Dutta, P., … Srinivasan, R. (2011). Experimental and numerical investigation of convective heat transfer in a gas turbine can combustor. Journal of Turbomachinery, 133(1). https://doi.org/10.1115/1.4001173 Patil, S., Sedalor, T., Tafti, D., Ekkad, S., Kim, Y., Dutta, P., … Srinivasan, R. (2011). Study of Flow and Convective Heat Transfer in a Simulated Scaled Up Low Emission Annular Combustor. Journal of Thermal Science and Engineering Applications, 3(3). https://doi.org/10.1115/1.4004531 LeBlanc, C., Narzary, D. P., Ekkad, S., & Alvin, M. A. (2011). Performance of tripod antivortex injection holes on vane suction side film cooling. 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84880695195&partnerID=MN8TOARS Stoakes, P., & Ekkad, S. (2011). Optimized impingement configurations for double wall cooling applications. Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1535–1543. https://doi.org/10.1115/GT2011-46143 Panchal, K., Abraham, S., Ekkad, S. V., Ng, W., Brown, B. J., & Malandra, A. (2011). Investigation of effect of end wall contouring methods on a transonic turbine blade passage. Proceedings of the ASME Turbo Expo, 7(PARTS A, B, AND C), 523–534. https://doi.org/10.1115/GT2011-45192 Lamont, J. A., Ekkad, S. V., & Alvin, M. A. (2011). Heat transfer distribution of various rib geometries for developing flow at high rotation numbers. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 10(PARTS A AND B), 1039–1047. https://doi.org/10.1115/imece2011-62610 Roy, A., Ekkad, S. V., & Vandsburger, U. (2011). Experimental validation of syngas composition of an entrained flow gasifier model under different operating conditions. 28th Annual International Pittsburgh Coal Conference 2011, PCC 2011, 2, 870–878. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84877599974&partnerID=MN8TOARS Lamont, J. A., & Ekkad, S. V. (2011). Effects of Rotation on jet impingement channel heat transfer. Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1269–1278. https://doi.org/10.1115/GT2011-45744 Abraham, S., Panchal, K., Ekkad, S. V., Ng, W., Brown, B. J., & Malandra, A. (2011). Effect of turbine airfoil shape on aerodynamic losses for turbine airfoils operating under transonic conditions. Proceedings of the ASME Turbo Expo, 7(PARTS A, B, AND C), 511–521. https://doi.org/10.1115/GT2011-45188 Abraham, S., Panchal, K., Ekkad, S. V., Ng, W., Brown, B. J., & Malandra, A. (2011). Effect of airfoil shape and turning angle on turbine airfoil aerodynamic performance at transonic conditions. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 6(PARTS A AND B), 1199–1208. https://doi.org/10.1115/imece2011-62167 Lamont, J. A., & Ekkad, S. V. (2011). Detailed heat transfer measurements inside rotating ribbed channels using the transient liquid crystal technique. ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. https://doi.org/10.1115/ajtec2011-44127 LeBlanc, C., Ekkad, S. V., Lambert, T., & Rajendran, V. (2011). Detailed heat transfer distributions in engine similar cooling channels for a turbine rotor blade with different rib orientations. Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1109–1116. https://doi.org/10.1115/GT2011-45254 Fong, R.-Y. (2011). A Comparison Study between ALE and SPH for Yacht Structure Design under Slamming Impact Loads. Abaqus Taiwan Users’ Conference. Ou, C.-C., Fong, R.-Y., & Lin, Y.-C. (2011). 95' Planning Yacht Structure Strength and Stiffness Analysis. Abaqus Taiwan Users’ Conference. Shanthraj, P., Hatem, T. M., & Zikry, M. A. (2011). Microstructural modeling of failure modes in martensitic steel alloys. Materials Research Society Symposium Proceedings, 1296, 56–61. https://doi.org/10.1557/opl.2011.1446 Xu, S., Rezvanian, O., Peters, K., & Zikry, M. A. (2011). Tunneling effects and electrical conductivity of CNT polymer composites. Materials Research Society Symposium Proceedings, 1304, 50–56. https://doi.org/10.1557/opl.2011.606 Pearson, J. D., & Zikry, M. A. (2011). Indentation and contact mechanics of nanocrystalline diamond crystals: A hierarchical molecular dynamics and finite-element approach. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. https://doi.org/10.2514/6.2011-1925 Chadderdon, S., Selfridge, R., Schultz, S., Webb, S., Park, C., Peters, K., & Zikry, M. (2011). High-speed full-spectrum fiber Bragg gratings interrogator system and testing. Proceedings of SPIE - The International Society for Optical Engineering, 7753. https://doi.org/10.1117/12.885138 Samaha, M. A., Tafreshi, H. V., & Gad-el-Hak, M. (2011). Modeling Superhydrophobic Surfaces Comprised of Random Roughness. Bulletin of the American Physical Society, 56(18), 314. Hosseini, S. A., & Tafreshi, H. V. (2011, May 10). On the Drag Force and Collection Efficiency of Circular and Non-Circular, Clean and Loaded Submicron Fibers. Presented at the American Filtration and Separation Society, Louisville, Kentucky. Ochanda, F. O., Samaha, M. A., Tafreshi, H. V., Tepper, G. C., & Gad-el-Hak, M. (2011). Salinity Effects on Superhydrophobic Coatings. Bulletin of the American Physical Society, 56(18), 314. Tafreshi, H. V., & Pourdeyhimi, B. (2011, September 13). An Overview on Micro- and Macro-Scale Modeling of Aerosol Filters. Presented at the NETInc, Innovative Nonwovens Conference, Atlanta, Georgia. Bucher, T. M., & Tafreshi, H. V. (2011, September 13). An Overview on Modeling Fluid Absorption in Fibrous Media. Presented at the NETInc, Innovative Nonwovens Conference, Atlanta, Georgia. Gad-el-Hak, M., .Ochanda, F. O., Samaha, M. A., Tafreshi, H. V., & Tepper, G. C. (2011). Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning. Bulletin of the American Physical Society, 56(18), 50. Emami, B., Tafreshi, H. V., Gad-el-Hak, M., & Tepper, G. C. (2011). Predicting Stability of Air-Water Interface on Superhydrophobic Surfaces. Bulletin of the American Physical Society, 56(18), 55. Bucher, T. M., Emami, B., Tafreshi, H. V., Gad-el-Hak, M., & Tepper, G. C. (2011). On the Resistance of Nanofibrous Superhydrophobic Coatings to Hydrostatic Pressures. Bulletin of the American Physical Society, 56(18), 175. Tepper, G. C., Samaha, M. A., Tafreshi, H. V., Gad-el-Hak, M., & Situ, I. (2011). In Situ, Noninvasive Characterization of Superhydrophobic Coatings. Bulletin of the American Physical Society, 56(18), 314. Ochanda, F. O., Samaha, M. A., Tafreshi, H. V., Tepper, G. C., & Gad-el-Hak, M. (2011). Fabrication of superhydrophobic fiber coatings by DC-biased AC-electrospinning. Journal of Applied Polymer Science, 123(2), 1112–1119. https://doi.org/10.1002/app.34583 Ashari, A., Bucher, T. M., & Tafreshi, H. V. (2011). Modeling motion-induced fluid release from partially saturated fibrous media onto surfaces with different hydrophilicity. International Journal of Heat and Fluid Flow, 32(5), 1076–1081. https://doi.org/10.1016/j.ijheatfluidflow.2011.06.002 Emami, B., Tafreshi, H. V., Gad-el-Hak, M., & Tepper, G. C. (2011). Predicting shape and stability of air–water interface on superhydrophobic surfaces with randomly distributed, dissimilar posts. Applied Physics Letters, 98(20), 203106. https://doi.org/10.1063/1.3590268 Samaha, M. A., Ochanda, F. O., Tafreshi, H. V., Tepper, G. C., & Gad-el-Hak, M. (2011). In situ, noninvasive characterization of superhydrophobic coatings. Review of Scientific Instruments, 82(4), 045109. https://doi.org/10.1063/1.3579498 Arambakam, R., Hosseini, S. A., Tafreshi, H. V., & Pourdeyhimi, B. (2011). A Monte Carlo simulation of radiative heat through fibrous media: Effects of boundary conditions and microstructural parameters. International Journal of Thermal Sciences, 50(6), 935–941. https://doi.org/10.1016/j.ijthermalsci.2011.01.015 Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2011). Analytical expressions for predicting performance of aerosol filtration media made up of trilobal fibers. Journal of Hazardous Materials, 186(2-3), 1503–1512. https://doi.org/10.1016/j.jhazmat.2010.12.027 Emami, B., Bucher, T. M., Tafreshi, H. V., Pestov, D., Gad-el-Hak, M., & Tepper, G. C. (2011). Simulation of meniscus stability in superhydrophobic granular surfaces under hydrostatic pressures. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 385(1-3), 95–103. https://doi.org/10.1016/j.colsurfa.2011.05.055 Hosseini, S. A., & Tafreshi, H. V. (2011). On the importance of fibers' cross-sectional shape for air filters operating in the slip flow regime. Powder Technology, 212(3), 425–431. https://doi.org/10.1016/j.powtec.2011.06.025 Mital, M., & Tafreshi, H. V. (2011). A methodology for determining optimal thermal damage in magnetic nanoparticle hyperthermia cancer treatment. International Journal for Numerical Methods in Biomedical Engineering, 28(2), 205–213. https://doi.org/10.1002/cnm.1456 Samaha, M. A., Vahedi Tafreshi, H., & Gad-el-Hak, M. (2011). Modeling drag reduction and meniscus stability of superhydrophobic surfaces comprised of random roughness. Physics of Fluids, 23(1). https://doi.org/10.1063/1.3537833 Fotovati, S., Hosseini, S. A., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2011). Transient modeling of dust-loaded pleated air filters. American Filtration and Separations Society Annual Conference 2011 - Shape up to Green, 464–470. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883797244&partnerID=MN8TOARS Xu, T.-B., Jiang, X., & Su, J. (2011). A piezoelectric multilayer-stacked hybrid actuation/transduction system. Applied Physics Letters, 98(24), 243503. https://doi.org/10.1063/1.3600057 Zhu, J., Wei, S., Ryu, J., & Guo, Z. (2011). Strain-Sensing Elastomer/Carbon Nanofiber “Metacomposites.” The Journal of Physical Chemistry C, 115(27), 13215–13222. https://doi.org/10.1021/jp202999c Li, Y., Zhu, J., Wei, S., Ryu, J., Sun, L., & Guo, Z. (2011). Poly(propylene)/Graphene Nanoplatelet Nanocomposites: Melt Rheological Behavior and Thermal, Electrical, and Electronic Properties. Macromolecular Chemistry and Physics, 212(18), 1951–1959. https://doi.org/10.1002/macp.201100263 Wang, S., Ota, S., Guo, B., Ryu, J., Rhodes, C., Xiong, Y., … Zhang, X. (2011). Subcellular Resolution Mapping of Endogenous Cytokine Secretion by Nano-Plasmonic-Resonator Sensor Array. Nano Letters, 11(8), 3431–3434. https://doi.org/10.1021/nl2018838 Ryu, J., Kim, H.-S., & Hahn, H. T. (2011). Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics. Journal of Electronic Materials, 40(1), 42–50. https://doi.org/10.1007/s11664-010-1384-0 Kang, J. S., Ryu, J., Kim, H. S., & Hahn, H. T. (2011). Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light. Journal of Electronic Materials, 40(11), 2268–2277. https://doi.org/10.1007/s11664-011-1711-0 Reyhanoglu, M. (2011). Modeling and Control of Space Vehicles with Fuel Slosh Dynamics. In J. Hall (Ed.), Advances in Spacecraft Technologies (pp. 549–562). Rijeka, Croatia: InTech. Reyhanoglu, M., Drakunov, S., & Mumme, J. (2011). Feasibility of Space Vehicle Debris Hazard Airspace Stratification. AIAA SPACE 2011 Conference & Exposition. Presented at the AIAA SPACE 2011 Conference & Exposition, Long Beach, CA. https://doi.org/10.2514/6.2011-7182 Reyhanoglu, M., & Rubio Hervas, J. (2011). Nonlinear control of a spacecraft with multiple fuel slosh modes. Proceedings of the 2011 50th IEEE Conference on Decision and Control and European Control Conference. Presented at the 2011 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC 2011), Orlando, FL. https://doi.org/10.1109/cdc.2011.6160660 Vermillion, C., Sun, J., & Butts, K. (2011). Predictive Control Allocation for a Thermal Management System Based on an Inner Loop Reference Model—Design, Analysis, and Experimental Results. IEEE Transactions on Control Systems Technology, 19(4), 772–781. https://doi.org/10.1109/tcst.2010.2053370 Zhang, J., & Fang, T. (2011). Spray combustion of biodiesel and diesel in a constant volume combustion chamber. SAE 2011 World Congress and Exhibition. https://doi.org/10.4271/2011-01-1380 Zhang, J., & Fang, T. (2011). Spray combustion of biodiesel and diesel in a constant volume combustion chamber. SAE Technical Papers. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84877163563&partnerID=MN8TOARS Zhang, J., & Fang, T. (2011). Simultaneous imaging of OH* chemiluminescence and flame luminosity of diesel and biodiesel spray combustion. American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE, 415–421. https://doi.org/10.1115/ICEF2011-60103 Mogk, J. P. M., Johanson, M. E., Hentz, V. R., Saul, K. R., & Murray, W. M. (2011). A simulation analysis of the combined effects of muscle strength and surgical tensioning on lateral pinch force following brachioradialis to flexor pollicis longus transfer. Journal of Biomechanics, 44(4), 669–675. https://doi.org/10.1016/j.jbiomech.2010.11.004 Armstrong, S., Drakunov, S., & Reyhanoglu, M. (2011). Feedback Control of a Nonholonomic Vehicle among Moving Obstacles using Variable Structure Observer. Infotech@Aerospace 2011. Presented at the Infotech@Aerospace 2011. https://doi.org/10.2514/6.2011-1586 MacKunis, W., Drakunov, S. V., Reyhanoglu, M., & Ukeiley, L. (2011). Nonlinear estimation of fluid flow velocity fields. IEEE Conference on Decision and Control and European Control Conference. Presented at the 2011 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC 2011). https://doi.org/10.1109/cdc.2011.6161193 Reyhanoglu, M., & Hervas, J. R. (2011). Three-axis magnetic attitude control algorithms for small satellites. Proceedings of 5th International Conference on Recent Advances in Space Technologies - RAST2011. Presented at the 2011 5th International Conference on Recent Advances in Space Technologies (RAST). https://doi.org/10.1109/rast.2011.5966973 Reyhanoglu, M., & Hervas, J. R. (2011). Nonlinear control of space vehicles with multi-mass fuel slosh dynamics. Proceedings of 5th International Conference on Recent Advances in Space Technologies - RAST2011. Presented at the 2011 5th International Conference on Recent Advances in Space Technologies (RAST). https://doi.org/10.1109/rast.2011.5966834 Drakunov, S. V., & Reyhanoglu, M. (2011). Hierarchical sliding mode observers for distributed parameter systems. Journal of Vibration and Control, 17(10), 1441–1453. https://doi.org/10.1177/1077546310370401 Yin, J., Retsch, M., Lee, J.-H., Thomas, E. L., & Boyce, M. C. (2011). Mechanics of Nanoindentation on a Monolayer of Colloidal Hollow Nanoparticles. Langmuir, 27(17), 10492–10500. https://doi.org/10.1021/la2018117 Zhu, J., Wei, S., Zhang, L., Mao, Y., Ryu, J., Haldolaarachchige, N., … Guo, Z. (2011). Electrical and dielectric properties of polyaniline–Al2O3 nanocomposites derived from various Al2O3 nanostructures. Journal of Materials Chemistry, 21(11), 3952. https://doi.org/10.1039/c0jm03908j Zhu, J., Wei, S., Zhang, L., Mao, Y., Ryu, J., Karki, A. B., … Guo, Z. (2011). Polyaniline-tungsten oxide metacomposites with tunable electronic properties. J. Mater. Chem., 21(2), 342–348. https://doi.org/10.1039/c0jm02090g Vermillion, C., Menezes, A., & Kolmanovsky, I. (2011). Stable Hierarchical Model Predictive Control Using an Inner Loop Reference Model*. IFAC Proceedings Volumes, 44(1), 9278–9283. https://doi.org/10.3182/20110828-6-it-1002.02733 Agarwal, G., Lattimer, B., Ekkad, S., & Vandsburger, U. (2011). Influence of multiple gas inlet jets on fluidized bed hydrodynamics using Particle Image Velocimetry and Digital Image Analysis. Powder Technology, 214(1), 122–134. https://doi.org/10.1016/j.powtec.2011.08.002 Parida, P. R., Ekkad, S. V., & Ngo, K. (2011). Experimental and numerical investigation of confined oblique impingement configurations for high heat flux applications. International Journal of Thermal Sciences, 50(6), 1037–1050. https://doi.org/10.1016/j.ijthermalsci.2011.01.010 Crouch, D. L., Li, Z., Barnwell, J. C., Plate, J. F., Daly, M., & Saul, K. R. (2011). Computer Simulation of Nerve Transfer Strategies for Restoring Shoulder Function After Adult C5 and C6 Root Avulsion Injuries. The Journal of Hand Surgery, 36(10), 1644–1651. https://doi.org/10.1016/j.jhsa.2011.07.019 Saul, K. R., Hayon, S., Smith, T. L., Tuohy, C. J., & Mannava, S. (2011). Postural dependence of passive tension in the supraspinatus following rotator cuff repair: A simulation analysis. Clinical Biomechanics, 26(8), 804–810. https://doi.org/10.1016/j.clinbiomech.2011.04.005 Mannava, S., Wiggins, W. F., Saul, K. R., Stitzel, J. D., Smith, B. P., Andrew Koman, L., … Tuohy, C. J. (2011). Contributions of Neural Tone to In Vivo Passive Muscle–Tendon Unit Biomechanical Properties in a Rat Rotator Cuff Animal Model. Annals of Biomedical Engineering, 39(7), 1914–1924. https://doi.org/10.1007/S10439-011-0301-X Pankow, M., Waas, A. M., Yen, C.-F., & Ghiorse, S. (2011). Shock loading of 3D woven composites: A validated finite element investigation. Composite Structures, 93(5), 1347–1362. https://doi.org/10.1016/j.compstruct.2010.11.001 Pankow, M., Justusson, B., Salvi, A., Waas, A. M., Yen, C.-F., & Ghiorse, S. (2011). Shock response of 3D woven composites: An experimental investigation. Composite Structures, 93(5), 1337–1346. https://doi.org/10.1016/j.compstruct.2010.10.021 Pankow, M., Salvi, A., Waas, A. M., Yen, C. F., & Ghiorse, S. (2011). Split Hopkinson pressure bar testing of 3D woven composites. Composites Science and Technology, 71(9), 1196–1208. https://doi.org/10.1016/j.compscitech.2011.03.017 Pankow, M., Waas, A. M., Yen, C. F., & Ghiorse, S. (2011). Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Cohesive zone based computational results. Composites Part A: Applied Science and Manufacturing, 42(12), 1863–1872. https://doi.org/10.1016/j.compositesa.2011.07.028 Pankow, M., Salvi, A., Waas, A. M., Yen, C. F., & Ghiorse, S. (2011). Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Experimental results. Composites Part A: Applied Science and Manufacturing, 42(10), 1463–1476. https://doi.org/10.1016/j.compositesa.2011.06.013 Narayanaswamy, V., Clemens, N. T., & Raja, L. L. (2011). Method for acquiring pressure measurements in presence of plasma-induced interference for supersonic flow control applications. Measurement Science and Technology, 22(12), 125107. https://doi.org/10.1088/0957-0233/22/12/125107 Hsu, A. G., Narayanaswamy, V., Clemens, N. T., & Frank, J. H. (2011). Mixture fraction imaging in turbulent non-premixed flames with two-photon LIF of krypton. Proceedings of the Combustion Institute, 33(1), 759–766. https://doi.org/10.1016/j.proci.2010.06.051 Mei, C.-S., Panych, L. P., Yuan, J., McDannold, N. J., Treat, L. H., Jing, Y., & Madore, B. (2011). Combining two-dimensional spatially selective RF excitation, parallel imaging, and UNFOLD for accelerated MR thermometry imaging. Magnetic Resonance in Medicine, 66(1), 112–122. https://doi.org/10.1002/mrm.22788 Luo, Y., Wang, Z., Xu, B., & Yuan, F. (2011). The pre-stack migration imaging technique for damages identification in concrete structures. Theoretical and Applied Mechanics Letters, 1(5), 051004. https://doi.org/10.1063/2.1105104 Liu, L., & Yuan, F. G. (2011). Nonlinear vibration energy harvester using diamagnetic levitation. Applied Physics Letters, 98(20), 203507. https://doi.org/10.1063/1.3583675 Luan, K., Sun, B., Gu, B., & Zhang, J. (2011). Design of an eco-power automobile body made from green composite and its structural optimization in FEA. In Advanced Materials Research (Vol. 287-290, pp. 405–409). https://doi.org/10.4028/www.scientific.net/AMR.287-290.405 Luan, K., Sun, B., & Gu, B. (2011). A Multi-scale geometrical model for finite element analyses of three-dimensional angle-interlock woven composite under ballistic penetration. CMES - Computer Modeling in Engineering and Sciences, 79(1), 31–61. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-82055206970&partnerID=MN8TOARS Shanthraj, P., & Zikry, M. A. (2011). Dislocation density evolution and interactions in crystalline materials. Acta Materialia, 59(20), 7695–7702. https://doi.org/10.1016/j.actamat.2011.08.041 Zhang, Z., & Kleinstreuer, C. (2011). Laminar-to-turbulent fluid-nanoparticle dynamics simulations: Model comparisons and nanoparticle-deposition applications. International Journal for Numerical Methods in Biomedical Engineering, 27(12), 1930–1950. https://doi.org/10.1002/cnm.1447 Heilmann, R. K., Ahn, M., Bruccoleri, A., Chang, C.-H., Gullikson, E. M., Mukherjee, P., & Schattenburg, M. L. (2011). Diffraction efficiency of 200-nm-period critical-angle transmission gratings in the soft x-ray and extreme ultraviolet wavelength bands. Applied Optics, 50(10), 1364. https://doi.org/10.1364/ao.50.001364 Chang, C.-H., Dominguez-Caballero, J. A., Choi, H. J., & Barbastathis, G. (2011). Nanostructured gradient-index antireflection diffractive optics. Optics Letters, 36(12), 2354. https://doi.org/10.1364/ol.36.002354 Chang, C.-H., Tian, L., Hesse, W. R., Gao, H., Choi, H. J., Kim, J.-G., … Barbastathis, G. (2011). From Two-Dimensional Colloidal Self-Assembly to Three-Dimensional Nanolithography. Nano Letters, 11(6), 2533–2537. https://doi.org/10.1021/nl2011824 Echekki, T., & Mastorakos, E. (2011). Turbulent combustion: Concepts, governing equations and modeling strategies. In Fluid Mechanics and its Applications (Vol. 95, pp. 19–39). https://doi.org/10.1007/978-94-007-0412-1_2 Echekki, T. (2011). The emerging role of multiscale methods in turbulent combustion. In Fluid Mechanics and its Applications (Vol. 95, pp. 177–192). https://doi.org/10.1007/978-94-007-0412-1_8 Echekki, T., Kerstein, A. R., & Sutherland, J. C. (2011). The one-dimensional-turbulence model. In Fluid Mechanics and its Applications (Vol. 95, pp. 249–276). https://doi.org/10.1007/978-94-007-0412-1_11 Liu, J., Xu, C., & Jackson, M. (2011). Traditional and non-traditional control techniques for grinding processes. In Machining with Abrasives (pp. 269–302). https://doi.org/10.1007/978-1-4419-7302-3_6 Yu, Y., Chen, Y., Xu, C., Fang, J., & An, L. (2011). Synthesis of spherical non-oxide silicon carbonitride ceramic particles. Journal of the American Ceramic Society, 94(9), 2779–2782. https://doi.org/10.1111/j.1551-2916.2011.04713.x Yu, Y., Yang, X., Xu, C., Fang, J., & An, L. (2011). Synthesis of nanostructured silicon carbide at ultralow temperature using self-assembled polymer micelles as a precursor. Journal of Materials Chemistry, 21(44), 17619–17622. https://doi.org/10.1039/c1jm13973h Chen, Y., Li, C., Wang, Y., Zhang, Q., Xu, C., Wei, B., & An, L. (2011). Self-assembled carbon-silicon carbonitride nanocomposites: High-performance anode materials for lithium-ion batteries. Journal of Materials Chemistry, 21(45), 18186–18190. https://doi.org/10.1039/c1jm13733f Ji, Y., Zhao, R., & Xu, C. (2011). Modeling and control of feed drive system for a micro-machining platform with nano-resolution. ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, DSCC 2011, 1, 263–270. https://doi.org/10.1115/DSCC2011-6026 Liu, J., Li, J., Ji, Y., & Xu, C. (2011). Investigation on the effect of SiC nanoparticles on cutting forces for micro-milling Magnesium Matrix Composites. ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 525–536. https://doi.org/10.1115/MSEC2011-50170 Deane, E., Hernandez, M., Giesecke, D., Meanor, M., Collins, S., Ji, Y., & Xu, C. (2011). Analysis of a simultaneous CNC turning and boring operation via multisensor monitoring. ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, 2, 273–280. https://doi.org/10.1115/MSEC2011-50168 An, L., Qu, J., Luo, J., Fan, Y., Zhang, L., Liu, J., … Blau, P. J. (2011). Aluminum nanocomposites having wear resistance better than stainless steel. Journal of Materials Research, 26(19), 2479–2483. https://doi.org/10.1557/jmr.2011.263 Xu, C., & Shin, Y. C. (2011). A self-tuning fuzzy controller for a class of multi-input multi-output nonlinear systems. Engineering Applications of Artificial Intelligence, 24(2), 238–250. https://doi.org/10.1016/j.engappai.2010.10.021 Wang, Y.-X., & Huang, H.-Y. S. (2011). An Overview of Lithium-Ion Battery Cathode Materials. Materials Research Society 2011 Spring Meeting, 1363–RR05-30. https://doi.org/10.1557/opl.2011.1363 Gong, X., An, L., & Xu, C. (2011). Recent Advances on Wireless Passive High-Temperature Sensors for Harsh Environments. Presented at the 35th International Conference and Exposition on Advanced Ceramics and Composites, Composite Institute, Daytona, FL. Liu, J., Li, J., Shao, G., Ji, Y., Xu, C., & An, L. (2011). Investigation of Micro-End-Milling of Polymer-Derived Ceramics for High Temperature Micro-Sensor Fabrication. Presented at the NSF CMMI Engineering Research and Innovation Conference, Atlanta, GA. Bryant, M., & Garcia, E. (2011). Modeling and testing of a novel aeroelastic flutter energy harvester. Journal of Vibration and Acoustics, 133. https://doi.org/10.1115/1.4002788 Bryant, M., Wolff, E., & Garcia, E. (2011). Aeroelastic flutter energy harvester design: the sensitivity of the driving instability to system parameters. SMART MATERIALS AND STRUCTURES, 20(12). https://doi.org/10.1088/0964-1726/20/12/125017 Wang, Y.-X., & Huang, H.-Y. S. (2011). Comparison of Lithium-ion battery cathode materials and the internal stress development. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 1685–1694. https://doi.org/10.1115/IMECE2011-65663 Zhang, J., Yao, S., Patel, H., & Fang, T. (2011). AN EXPERIMENTAL STUDY ON GASOLINE DIRECT-INJECTION SPRAY AND ATOMIZATION CHARACTERISTICS OF ALCOHOL FUELS AND ISOOCTANE. ATOMIZATION AND SPRAYS, 21(5), 363–374. https://doi.org/10.1615/atomizspr.2011003624 Huang, W., Kim, K., Zhang, S., Yuan, F.-G., & Jiang, X. (2011). Scaling effect of flexoelectric (Ba,Sr)TiO3 microcantilevers. PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 5(9), 350–352. https://doi.org/10.1002/pssr.201105326 Ngaile, G., Yang, C., & Kilonzo, O. (2011). Real-Time Friction Error Compensation in Tube Hydroforming Process Control. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 133(6). https://doi.org/10.1115/1.4005430 Yang, C., & Ngaile, G. (2011). Preform Design for Tube Hydroforming Based on Wrinkle Formation. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 133(6). https://doi.org/10.1115/1.4005118 Amini, R., Taghipour, R., & Mirgolbabaei, H. (2011). Numerical assessment of hydrodynamic characteristics in chlorine contact tank. International Journal for Numerical Methods in Fluids, 67(7), 885–898. Li, J., Sheeran, P. S., & Kleinstreuer, C. (2011). Analysis of Multi-Layer Immiscible Fluid Flow in a Microchannel. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 133(11). https://doi.org/10.1115/1.4005134 Ramasubramanian, M. K., Sun, Z. H., & Chen, G. (2011). A mechanics of materials model for the creping process. Journal of Manufacturing Science and Engineering, 133(5). Kuznetsov, A. V. (2011). Nanofluid bio-thermal convection: simultaneous effects of gyrotactic and oxytactic micro-organisms. FLUID DYNAMICS RESEARCH, 43(5). https://doi.org/10.1088/0169-5983/43/5/055505 Vitchuli, N., Shi, Q., Nowak, J., Kay, K., Caldwell, J. M., Breidt, F., … Zhang, X. (2011). Multifunctional ZnO/Nylon 6 nanofiber mats by an electrospinning-electrospraying hybrid process for use in protective applications. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 12(5). https://doi.org/10.1088/1468-6996/12/5/055004 Fang, T., & Yao, S. (2011). Viscous Swirling Flow over a Stretching Cylinder. CHINESE PHYSICS LETTERS, 28(11). https://doi.org/10.1088/0256-307x/28/11/114702 Tie-Gang, F., Ji, Z., Yong-Fang, Z., & Hua, T. (2011). Unsteady Viscous Flow over an Expanding Stretching Cylinder. CHINESE PHYSICS LETTERS, 28(12). https://doi.org/10.1088/0256-307x/28/12/124707 Nield, D. A., & Kuznetsov, A. V. (2011). The effects of combined horizontal and vertical heterogeneity on the onset of convection in a porous medium with horizontal throughflow. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(25-26), 5595–5601. https://doi.org/10.1016/j.ijheatmasstransfer.2011.07.019 Nield, D. A., & Kuznetsov, A. V. (2011). The Effect of Vertical Throughflow on the Onset of Convection in a Porous Medium in a Rectangular Box. TRANSPORT IN POROUS MEDIA, 90(3), 993–1000. https://doi.org/10.1007/s11242-011-9828-4 Nield, D. A., & Kuznetsov, A. V. (2011). Onset of Convection in a Porous Medium with Strong Vertical Throughflow. TRANSPORT IN POROUS MEDIA, 90(3), 883–888. https://doi.org/10.1007/s11242-011-9821-y Shi, J., & Zikry, M. A. (2011). Modeling of grain boundary transmission, emission, absorption and overall crystalline behavior in Sigma 1, Sigma 3, and Sigma 17b bicrystals. JOURNAL OF MATERIALS RESEARCH, 26(14), 1676–1687. https://doi.org/10.1557/jmr.2011.192 Zheng, Q., & Wu, F. (2011). Generalized nonlinear H-infinity synthesis condition with its numerically efficient solution. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 21(18), 2079–2100. https://doi.org/10.1002/rnc.1682 Kuznetsov, A. V. (2011). Effect of pharmaceutical agent degradation on axonal transport drug delivery: An analytical solution for a transient situation. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 38(10), 1317–1321. https://doi.org/10.1016/j.icheatmasstransfer.2011.08.018 Dongare, A. M., Rajendran, A. M., Lamattina, B., Zikry, M. A., & Brenner, D. W. (2011). Dynamic failure behavior of nanocrystalline Cu at atomic scales. Computers, Materials and Continua, 24(1), 43–60. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-80155206327&partnerID=MN8TOARS Rezvanian, O., & Zikry, M. A. (2011). Continuum modeling of large-strain deformation modes in gold nanowires. JOURNAL OF MATERIALS RESEARCH, 26(17), 2286–2292. https://doi.org/10.1557/jmr.2011.148 Kuznetsov, A. V. (2011). An analytical solution describing retrograde viral transport in an axon. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 38(10), 1313–1316. https://doi.org/10.1016/j.icheatmasstransfer.2011.08.016 Hatem, T. M., & Zikry, M. A. (2011). A model for determining initial dislocation-densities associated with martensitic transformations. MATERIALS SCIENCE AND TECHNOLOGY, 27(10), 1570–1573. https://doi.org/10.1179/1743284711y.0000000079 Kuznetsov, A. V., & Nield, D. A. (2011). The Effects of Combined Horizontal and Vertical Heterogeneity on the Onset of Convection in a Porous Medium with Vertical Throughflow. TRANSPORT IN POROUS MEDIA, 90(2), 465–478. https://doi.org/10.1007/s11242-011-9795-9 Liu, W., Zhang, X., Xu, G., Bradford, P. D., Wang, X., Zhao, H., … Zhu, Y. (2011). Producing superior composites by winding carbon nanotubes onto a mandrel under a poly(vinyl alcohol) spray. CARBON, 49(14), 4786–4791. https://doi.org/10.1016/j.carbon.2011.06.089 Kuznetsov, A. V. (2011). Modelling active transport in Drosophila unipolar motor neurons. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 14(12), 1117–1131. https://doi.org/10.1080/10255842.2010.515983 Moore, N. J., Kribs, J., & Lyons, K. M. (2011). Investigation of Jet-Flame Blowout with Lean-Limit Considerations. FLOW TURBULENCE AND COMBUSTION, 87(4), 525–536. https://doi.org/10.1007/s10494-011-9334-3 Hartl, A. E., Miller, B. N., & Mazzoleni, A. P. (2011). Dynamic modeling and simulation of a real world billiard. PHYSICS LETTERS A, 375(42), 3682–3686. https://doi.org/10.1016/j.physleta.2011.08.038 Wang, G. Y., Baek, S., Elliott, J., Kadavelugu, A., Wang, F., She, X., … Huang, A. Q. (2011). Design and hardware implementation of gen-1 silicon based solid state transformer. Annual ieee conference on applied power electronics conference and, 1344–1349. https://doi.org/10.1109/apec.2011.5744766 Gieseking, D. A., Choi, J.-I., Edwards, J. R., & Hassan, H. A. (2011, October). Compressible-Flow Simulations Using a New Large-Eddy Simulation/Reynolds-Averaged Navier-Stokes Model. AIAA JOURNAL, Vol. 49, pp. 2194–2209. https://doi.org/10.2514/1.j051001 O'Connor, B., Kline, R. J., Conrad, B. R., Richter, L. J., Gundlach, D., Toney, M. F., & DeLongchamp, D. M. (2011). Anisotropic Structure and Charge Transport in Highly Strain-Aligned Regioregular Poly(3-hexylthiophene). ADVANCED FUNCTIONAL MATERIALS, 21(19), 3697–3705. https://doi.org/10.1002/adfm.201100904 Zhang, J., Fang, T.-gang, & Zhong, Y.-fang. (2011). Analytical solution of magnetohydrodynamic sink flow. APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 32(10), 1221–1230. https://doi.org/10.1007/s10483-011-1495-9 Elkhodary, K. I., & Zikry, M. A. (2011). A fracture criterion for finitely deforming crystalline solids-The dynamic fracture of single crystals. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 59(10), 2007–2022. https://doi.org/10.1016/j.jmps.2011.07.004 Tendulkar, S., McQuilling, J. P., Childers, C., Pareta, R., Opara, E. C., & Ramasubramanian, M. K. (2011). A Scalable microfluidic device for the mass production of microencapsulated islets. Transplantation Proceedings, 43(9), 3184–3187. Barletta, A., Celli, M., & Kuznetsov, A. V. (2011). Transverse Heterogeneity Effects in the Dissipation-Induced Instability of a Horizontal Porous Layer. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 133(12). https://doi.org/10.1115/1.4004371 Li, W., Ren, Y.-X., Lei, G., & Luo, H. (2011). The multi-dimensional limiters for solving hyperbolic conservation laws on unstructured grids. JOURNAL OF COMPUTATIONAL PHYSICS, 230(21), 7775–7795. https://doi.org/10.1016/j.jcp.2011.06.018 Qin, Q., & Zhu, Y. (2011). Static Friction between Silicon Nanowires and Elastomeric Substrates. ACS NANO, 5(9), 7404–7410. https://doi.org/10.1021/nn202343w Crews, J. H., Mattson, M. G., & Buckner, G. D. (2011). Multi-objective control optimization for semi-active vehicle suspensions. JOURNAL OF SOUND AND VIBRATION, 330(23), 5502–5516. https://doi.org/10.1016/j.jsv.2011.05.036 Wang, X., Bradford, P. D., Liu, W., Zhao, H., Inoue, Y., Maria, J.-P., … Zhu, Y. (2011). Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching. COMPOSITES SCIENCE AND TECHNOLOGY, 71(14), 1677–1683. https://doi.org/10.1016/j.compscitech.2011.07.023 Jin, C., Aggarwal, R., Wei, W., Nori, S., Kumar, D., Ponarin, D., … Narayan, R. J. (2011). Intrinsic Room-Temperature Ferromagnetic Properties of Ni-Doped ZnO Thin Films. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(11), 3250–3254. https://doi.org/10.1007/s11661-010-0479-9 Nield, D. A., & Kuznetsov, A. V. (2011). Forced Convection in a Channel Partly Occupied by a Bidisperse Porous Medium: Symmetric Case. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 133(7). https://doi.org/10.1115/1.4003667 Ngaile, G., & Kinsey, B. (2011, December). Advances in Plastic Forming of Metals. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 133. https://doi.org/10.1115/1.4005461 Thein, M., Cheng, A., Khanna, P., Zhang, C., Park, E.-J., Ahmed, D., … Xu, J. (2011). Site-specific sonoporation of human melanoma cells at the cellular level using high lateral-resolution ultrasonic micro-transducer arrays. BIOSENSORS & BIOELECTRONICS, 27(1), 25–33. https://doi.org/10.1016/j.bios.2011.05.026 Fang, T., Yao, S., & Pop, L. (2011). Flow and heat transfer over a generalized stretching/shrinking wall problem-Exact solutions of the Navier-Stokes equations. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 46(9), 1116–1127. https://doi.org/10.1016/j.ijnonlinmec.2011.04.014 Hackney, D., & Peters, K. (2011, August). Damage Identification After Impact in Sandwich Composites Through Embedded Fiber Bragg Sensors. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 22, pp. 1305–1316. https://doi.org/10.1177/1045389x11414220 Yang, T.-H., Nori, S., Mal, S., & Narayan, J. (2011). Control of room-temperature defect-mediated ferromagnetism in VO2 films. ACTA MATERIALIA, 59(16), 6362–6368. https://doi.org/10.1016/j.actamat.2011.06.047 Kuznetsov, A. V. (2011). Analytical investigation of various regimes of retrograde trafficking of neurotropic viruses in axons. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 9(5), 1372–1378. https://doi.org/10.2478/s11534-011-0051-2 Song, Y., & Peters, K. (2011). Self-repairing polymer optical fiber sensor. 21ST INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS, Vol. 7753. https://doi.org/10.1117/12.885147 Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2011). Investigation of the role of diffusivity on spreading, rate, and merging of the bell-shaped waves in slow axonal transport. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 27(7), 1040–1053. https://doi.org/10.1002/cnm.1417 Coldwell, D., Sangro, B., Wasan, H., Salem, R., & Kennedy, A. (2011). [Review of General selection criteria of patients for radioembolization of liver tumors an international working group report]. American Journal of Clinical Oncology-Cancer Clinical Trials, 34(3), 337–341. Webb, S., Noevere, A., Peters, K., Zikry, M. A., Vella, T., Chadderdon, S., … Schultz, S. (2011). Full-spectral interrogation of fiber Bragg grating sensors for damage identification. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2011, Vol. 7982. https://doi.org/10.1117/12.881093 Kuznetsov, A. V. (2011). Coupling a dynein transport model with a model of anterograde and retrograde transport of intracellular organelles. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 38(7), 833–837. https://doi.org/10.1016/j.icheatmasstransfer.2011.04.024 Zhao, H., & Yuan, F.-G. (2011). Carbon nanotube yarn sensors for structural health monitoring of composites. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2011, Vol. 7983. https://doi.org/10.1117/12.880938 Peters, K. (2011). Analysis of fiber Bragg grating spectral features for in-situ assessment of Composites. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2011, Vol. 7982. https://doi.org/10.1117/12.881149 Zhong, Y., Fang, T., & Wert, K. L. (2011). An adsorption air conditioning system to integrate with the recent development of emission control for heavy-duty vehicles. ENERGY, 36(7), 4125–4135. https://doi.org/10.1016/j.energy.2011.04.032 Kim, K., Jiang, X., & Zhang, S. (2011). A High Temperature Piezoelectric Sensor for Structure Health Monitoring. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2011, Vol. 7983. https://doi.org/10.1117/12.880163 Kim, K., Zhang, S., Huang, W., Yu, F., & Jiang, X. (2011). YCa4O(BO3)(3) (YCOB) high temperature vibration sensor. JOURNAL OF APPLIED PHYSICS, 109(12). https://doi.org/10.1063/1.3598115 Bradford, P. D., Wang, X., Zhao, H., & Zhu, Y. T. (2011). Tuning the compressive mechanical properties of carbon nanotube foam. CARBON, 49(8), 2834–2841. https://doi.org/10.1016/j.carbon.2011.03.012 Fang, T., Lee, C.-fon F., & Zhang, J. (2011). The boundary layers of an unsteady incompressible stagnation-point flow with mass transfer. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 46(7), 942–948. https://doi.org/10.1016/j.ijnonlinmec.2011.04.007 Nield, D. A., & Kuznetsov, A. V. (2011). The Onset of Convection in a Heterogeneous Porous Medium with Vertical Throughflow. TRANSPORT IN POROUS MEDIA, 88(2), 347–355. https://doi.org/10.1007/s11242-011-9742-9 Nield, D. A., & Kuznetsov, A. V. (2011). The Effect of Vertical Throughflow on Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid. TRANSPORT IN POROUS MEDIA, 87(3), 765–775. https://doi.org/10.1007/s11242-011-9717-x Sangro, B., Salem, R., Kennedy, A., Coldwell, D., & Wasan, H. (2011). [Review of Radioembolization for Hepatocellular carcinoma a review of the evidence and treatment recommendations]. American Journal of Clinical Oncology-Cancer Clinical Trials, 34(4), 422–431. Sandukas, S., Yamamoto, A., & Rabiei, A. (2011). Osteoblast adhesion to functionally graded hydroxyapatite coatings doped with silver. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 97A(4), 490–497. https://doi.org/10.1002/jbm.a.33081 Fotovati, S., Hosseini, S. A., Tafreshi, H. V., & Pourdeyhimi, B. (2011). Modeling instantaneous pressure drop of pleated thin filter media during dust loading. CHEMICAL ENGINEERING SCIENCE, 66(18), 4036–4046. https://doi.org/10.1016/j.ces.2011.05.038 Lee, W. M., & Zikry, M. A. (2011). Microstructural Characterization of a High-Strength Aluminum Alloy Subjected to High Strain-Rate Impact. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(5), 1215–1221. https://doi.org/10.1007/s11661-010-0476-z June, M. S., Kribs, J., & Lyons, K. M. (2011). Measuring efficiency of positive and negative ionic wind devices for comparison to fans and blowers. JOURNAL OF ELECTROSTATICS, 69(4), 345–350. https://doi.org/10.1016/j.elstat.2011.04.010 Winfrey, A. L., Abd Al-Halim, M., Gilligan, J. G., Saveliev, A. V., & Bourham, M. A. (2011, August). MODELING OF AN ABLATION-FREE ELECTROTHERMAL PLASMA PELLET ACCELERATOR. FUSION SCIENCE AND TECHNOLOGY, Vol. 60, pp. 480–485. https://doi.org/10.13182/fst60-480 Kuznetsov, I. A., Greenfield, M. J., Mehta, Y. U., Merchan-Merchan, W., Salkar, G., & Saveliev, A. V. (2011). Increasing the solar cell power output by coating with transition metal-oxide nanorods. APPLIED ENERGY, 88(11), 4218–4221. https://doi.org/10.1016/j.apenergy.2011.04.033 Ward, T., & White, A. R. (2011). Gas-driven displacement of a liquid in a partially filled radial Hele-Shaw cell. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics, 83(4). Kleinstreuer, C., & Feng, Y. (2011). [Review of Experimental and theoretical studies of nanofluid thermal conductivity enhancement: a review]. NANOSCALE RESEARCH LETTERS, 6. https://doi.org/10.1186/1556-276x-6-229 Nadeem, S., Zaheer, S., & Fang, T. (2011). Effects of thermal radiation on the boundary layer flow of a Jeffrey fluid over an exponentially stretching surface. NUMERICAL ALGORITHMS, 57(2), 187–205. https://doi.org/10.1007/s11075-010-9423-8 Vendra, L. J., Brown, J. A., & Rabiei, A. (2011). Effect of processing parameters on the microstructure and mechanical properties of Al-steel composite foam. JOURNAL OF MATERIALS SCIENCE, 46(13), 4574–4581. https://doi.org/10.1007/s10853-011-5356-4 Shi, Q., Vitchuli, N., Nowak, J., Caldwell, J. M., Breidt, F., Bourham, M., … McCord, M. (2011). Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning. EUROPEAN POLYMER JOURNAL, 47(7), 1402–1409. https://doi.org/10.1016/j.eurpolymj.2011.04.002 Kuznetsov, A. V., & Nield, D. A. (2011). Double-diffusive natural convective boundary-layer flow of a nanofluid past a vertical plate. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 50(5), 712–717. https://doi.org/10.1016/j.ijthermalsci.2011.01.003 Wu, G., Kuznetsov, A. V., & Jasper, W. J. (2011). Distribution characteristics of exhaust gases and soot particles in a wall-flow ceramics filter. JOURNAL OF AEROSOL SCIENCE, 42(7), 447–461. https://doi.org/10.1016/j.jaerosci.2011.04.003 Hummel, A., Barker, R., Lyons, K., Deaton, A. S., & Morton-Aslanis, J. (2011). Development of Instrumented Manikin Hands for Characterizing the Thermal Protective Performance of Gloves in Flash Fire Exposures. FIRE TECHNOLOGY, 47(3), 615–629. https://doi.org/10.1007/s10694-010-0190-9 Li, Z., & Kleinstreuer, C. (2011). Airflow analysis in the alveolar region using the lattice-Boltzmann method. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, 49(4), 441–451. https://doi.org/10.1007/s11517-011-0743-1 Nield, D. A., & Kuznetsov, A. V. (2011). A three-velocity three-temperature model for a tridisperse porous medium: Forced convection in a channel. International Journal of Heat and Mass Transfer, 54(11-12), 2490–2498. https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.013 Abdi, O., Peters, K., Kowalsky, M., & Hassan, T. (2011). Validation of a single-mode polymer optical fiber sensor and interrogator for large strain measurements. MEASUREMENT SCIENCE AND TECHNOLOGY, 22(7). https://doi.org/10.1088/0957-0233/22/7/075207 Zhong, Y., & Fang, T. (2011). Unsteady stagnation-point flow over a plate moving along the direction of flow impingement. International Journal of Heat and Mass Transfer, 54(15-16), 3103–3108. https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.024 Nield, D. A., & Kuznetsov, A. V. (2011). The onset of double-diffusive convection in a nanofluid layer. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 32(4), 771–776. https://doi.org/10.1016/j.ijheatfluidflow.2011.03.010 Kuznetsov, A. V., & Nield, D. A. (2011). The onset of convection in a tridisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(15-16), 3120–3127. https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.021 Nield, D. A., & Kuznetsov, A. V. (2011). The Cheng-Minkowycz problem for natural convection about a vertical plate embedded in a tridisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(15-16), 3485–3493. https://doi.org/10.1016/j.ijheatmasstransfer.2011.03.037 McIntosh, R. A., Zhang, P., Cowger, C., Parks, R., Lagudah, E. S., & Hoxha, S. (2011). Rye-derived powdery mildew resistance gene Pm8 in wheat is suppressed by the Pm3 locus. THEORETICAL AND APPLIED GENETICS, 123(3), 359–367. https://doi.org/10.1007/s00122-011-1589-5 Zheng, C., Cheng, L., Saveliev, A., Luo, Z., & Cen, K. (2011). Numerical studies on flame inclination in porous media combustors. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(15-16), 3642–3649. https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.066 Kuznetsov, A. V. (2011). Modeling of retrograde nanoparticle transport in axons and dendrites. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 38(5), 543–547. https://doi.org/10.1016/j.icheatmasstransfer.2011.03.015 McGowan, G. Z., Granlund, K., Ol, M. V., Gopalarathnam, A., & Edwards, J. R. (2011, July). Investigations of Lift-Based Pitch-Plunge Equivalence for Airfoils at Low Reynolds Numbers. AIAA JOURNAL, Vol. 49, pp. 1511–1524. https://doi.org/10.2514/1.j050924 Wang, W., & Echekki, T. (2011). Investigation of lifted jet flames stabilization mechanism using RANS simulations. FIRE SAFETY JOURNAL, 46(5), 254–261. https://doi.org/10.1016/j.firesaf.2011.02.007 Hong, S. W., Kang, Y.-T., Kleinstreuer, C., & Koo, J. (2011). Impact analysis of natural convection on thermal conductivity measurements of nanofluids using the transient hot-wire method. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(15-16), 3448–3456. https://doi.org/10.1016/j.ijheatmasstransfer.2011.03.041 Lien, J. P., Fang, T., & Buckner, G. D. (2011). Hysteretic neural network modeling of spring-coupled piezoelectric actuators. SMART MATERIALS AND STRUCTURES, 20(6). https://doi.org/10.1088/0964-1726/20/6/065007 Shanthraj, P., Rezvanian, O., & Zikry, M. A. (2011). Electrothermomechanical Finite-Element Modeling of Metal Microcontacts in MEMS. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 20(2), 371–382. https://doi.org/10.1109/jmems.2010.2100020 Riede, T., York, A., Furst, S., Mueller, R., & Seelecke, S. (2011). Elasticity and stress relaxation of a very small vocal fold. JOURNAL OF BIOMECHANICS, 44(10), 1936–1940. https://doi.org/10.1016/j.jbiomech.2011.04.024 Robichaud, G., Dixon, R. B., Potturi, A. S., Cassidy, D., Edwards, J. R., Sohn, A., … Muddiman, D. C. (2011). Design, modeling, fabrication, and evaluation of the air amplifier for improved detection of biomolecules by electrospray ionization mass spectrometry. INTERNATIONAL JOURNAL OF MASS SPECTROMETRY, 300(2-3), 99–107. https://doi.org/10.1016/j.ijms.2010.04.006 Zhang, Z., & Kleinstreuer, C. (2011). Computational analysis of airflow and nanoparticle deposition in a combined nasal-oral-tracheobronchial airway model. JOURNAL OF AEROSOL SCIENCE, 42(3), 174–194. https://doi.org/10.1016/j.jaerosci.2011.01.001 Kuznetsov, A. V. (2011). Bio-thermal convection induced by two different species of microorganisms. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 38(5), 548–553. https://doi.org/10.1016/j.icheatmasstransfer.2011.02.006 Song, Y. J., & Peters, K. J. (2011). A self-repairing polymer waveguide sensor. SMART MATERIALS AND STRUCTURES, 20(6). https://doi.org/10.1088/0964-1726/20/6/065005 Pantokratoras, A., & Fang, T. (2011). A note on the Blasius and Sakiadis flow of a non-Newtonian power-law fluid in a constant transverse magnetic field. ACTA MECHANICA, 218(1-2), 187–194. https://doi.org/10.1007/s00707-010-0406-6 Webb, S., Peters, K., Zikry, M., Vella, T., Chadderdon, S., Selfridge, R., & Schultz, S. (2011). Wavelength hopping due to spectral distortion in dynamic fiber Bragg grating sensor measurements. Measurement Science and Technology, 22(6), 065301. https://doi.org/10.1088/0957-0233/22/6/065301 Aziz, A., & Fang, T. (2011). Thermal analysis of an annular fin with (a) simultaneously imposed base temperature and base heat flux and (b) fixed base and tip temperatures. ENERGY CONVERSION AND MANAGEMENT, 52(7), 2467–2478. https://doi.org/10.1016/j.enconman.2011.02.004 Kuznetsov, A. V., & Nield, D. A. (2011). THE EFFECT OF LOCAL THERMAL NONEQUILIBRIUM ON THE ONSET OF CONVECTION IN A POROUS MEDIUM LAYER SATURATED BY A NANOFLUID: BRINKMAN MODEL. JOURNAL OF POROUS MEDIA, 14(4), 285–293. https://doi.org/10.1615/jpormedia.v14.i4.10 Toledo, M., Vergara, E., & Savelieu, A. V. (2011). Syngas production in hybrid filtration combustion. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 36(6), 3907–3912. https://doi.org/10.1016/j.ijhydene.2010.11.060 Kuznetsov, A. V. (2011). Nanofluid bioconvection in water-based suspensions containing nanoparticles and oxytactic microorganisms: oscillatory instability. NANOSCALE RESEARCH LETTERS, Vol. 6. https://doi.org/10.1186/1556-276x-6-100 Seok, C. S., Marple, B., Song, Y. J., Gollapudi, S., Charit, I., & Murty, K. L. (2011, March). High temperature deformation characteristics of Zirlo (TM) tubing via ring-creep and burst tests. NUCLEAR ENGINEERING AND DESIGN, Vol. 241, pp. 599–602. https://doi.org/10.1016/j.nucengdes.2010.04.017 Diaz, F. J., & Kuznetsov, A. V. (2011). Effect of the flow in a printing nip on paper runnability during sheetfed offset printing. Appita Journal, 64(2), 158-. Ting-Feng, M., Chao, Z., Xiao-Ning, J., & Guan-Ping, F. (2011). Thickness shear mode quartz crystal resonators with optimized elliptical electrodes. CHINESE PHYSICS B, 20(4). https://doi.org/10.1088/1674-1056/20/4/047701 Lau, W. Y., Kennedy, A. S., Kim, Y. H., Lai, H. K., Lee, R. C., Leung, T. W. T., … Wang, S. C. (2011). Response to "Patient selection and activity planning guide for selective internal radiotherapy with Yttrium-90 resin microspheres.". International Journal of Radiation Oncology, Biology, Physics, 80(4), 1280–1281. Kilonzo, O. (2011). Process control model for tube hydroforming. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2010, vol 2, 131–139. Liu, L., & Yuana, F. G. (2011). Nonlinear vibration energy harvester using diamagnetic levitation. Applied Physics Letters, 98(20). Kuznetsov, A. V. (2011). Modeling bidirectional transport of quantum dot nanoparticles in membrane nanotubes. MATHEMATICAL BIOSCIENCES, 232(2), 101–109. https://doi.org/10.1016/j.mbs.2011.04.008 Zheng, F., Kuznetsov, A. V., Roberts, W. L., & Paxson, D. E. (2011). Influence of Geometry on Starting Vortex and Ejector Performance. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 133(5). https://doi.org/10.1115/1.4004082 Moore, N. J., Terry, S. D., & Lyons, K. M. (2011). Flame Hysteresis Effects in Methane Jet Flames in Air-Coflow. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 133(2). https://doi.org/10.1115/1.4003806 Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2011). Effect of cytoskeletal element degradation on merging of concentration waves in slow axonal transport. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 9(4), 898–908. https://doi.org/10.2478/s11534-010-0116-7 Ghosh, S. K. (2011). Economic implications of imputation in agricultural economic data: Discussion. American Journal of Agricultural Economics, 93(2), 627–628. Elkhodary, K., Lee, W., Sun, L. P., Brenner, D. W., & Zikry, M. A. (2011). Deformation mechanisms of an Omega precipitate in a high-strength aluminum alloy subjected to high strain rates. JOURNAL OF MATERIALS RESEARCH, 26(4), 487–497. https://doi.org/10.1557/jmr.2010.29 Mal, S., Nori, S., Narayan, J., & Prater, J. T. (2011). Defect-mediated ferromagnetism and controlled switching characteristics in ZnO. JOURNAL OF MATERIALS RESEARCH, 26(10), 1298–1308. https://doi.org/10.1557/jmr.2011.74 Ghosh, A., Deshmukh, K., & Ngaile, G. (2011). Database for real-time loading path prediction for tube hydroforming using multidimensional cubic spline interpolation. Proceedings of the ASME International Manufacturing Science and Engineering Conference 2010, vol 1, 609–618. https://doi.org/10.1115/msec2010-34099 Deng, F., Lu, W., Zhao, H., Zhu, Y., Kim, B.-S., & Chou, T.-W. (2011). The properties of dry-spun carbon nanotube fibers and their interfacial shear strength in an epoxy composite. CARBON, 49(5), 1752–1757. https://doi.org/10.1016/j.carbon.2010.12.061 Burke, D. A., Hall, C. E., Jr., & Cook, S. P. (2011). System-Level Airworthiness Tool. JOURNAL OF AIRCRAFT, Vol. 48, pp. 777–785. https://doi.org/10.2514/1.c031022 Kleinstreuer, C., & Zhang, Z. (2011). Optimal Drug-Aerosol Delivery to Predetermined Lung Sites. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 133(1). https://doi.org/10.1115/1.4002224 Fang, T., & Zhang, J. (2011). Note on the Heat Transfer of Flows over a Stretching Wall in Porous Media: Exact Solutions. TRANSPORT IN POROUS MEDIA, 86(2), 609–614. https://doi.org/10.1007/s11242-010-9640-6 Kuznetsov, A. V. (2011). Non-oscillatory and oscillatory nanofluid bio-thermal convection in a horizontal layer of finite depth. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 30(2), 156–165. https://doi.org/10.1016/j.euromechflu.2010.10.007 Kuznetsov, A. V. (2011). Modeling Bidirectional Transport of New and Used Organelles in Fast Axonal Transport in Neurons. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 133(1). https://doi.org/10.1115/1.4002304 Yao, S., Fang, T., & Zhong, Y. (2011). Heat transfer of a generalized stretching/shrinking wall problem with convective boundary conditions. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 16(2), 752–760. https://doi.org/10.1016/j.cnsns.2010.05.028 Zhang, Z., & Kleinstreuer, C. (2011). Deposition of naphthalene and tetradecane vapors in models of the human respiratory system. INHALATION TOXICOLOGY, 23(1), 44–57. https://doi.org/10.3109/08958378.2010.540261 Zheng, Q., & Wu, F. (2011). Adaptive control design for uncertain polynomial nonlinear systems with parametric uncertainties. INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING, 25(6), 502–518. https://doi.org/10.1002/acs.1215 Basciano, C., Kleinstreuer, C., Hyun, S., & Finol, E. A. (2011). A Relation Between Near-Wall Particle-Hemodynamics and Onset of Thrombus Formation in Abdominal Aortic Aneurysms. ANNALS OF BIOMEDICAL ENGINEERING, 39(7), 2010–2026. https://doi.org/10.1007/s10439-011-0285-6 Nield, D. A., & Kuznetsov, A. V. (2011). The Cheng-Minkowycz problem for the double-diffusive natural convective boundary layer flow in a porous medium saturated by a nanofluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 54(1-3), 374–378. https://doi.org/10.1016/j.ijheatmasstransfer.2010.09.034 Merchan-Merchan, W., Saveliev, A. V., & Jimenez, W. C. (2011). Solid support flame synthesis of 1-D and 3-D tungsten-oxide nanostructures. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 33, 1899–1908. https://doi.org/10.1016/j.proci.2010.06.122 Silverberg, L. M., Tran, C. M., & Adams, T. M. (2011). Optimal Targets for the Bank Shot in Men's Basketball. JOURNAL OF QUANTITATIVE ANALYSIS IN SPORTS, 7(1). https://doi.org/10.2202/1559-0410.1299 Bohon, M. D., Metzger, B. A., Linak, W. P., King, C. J., & Roberts, W. L. (2011). Glycerol combustion and emissions. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 33, 2717–2724. https://doi.org/10.1016/j.proci.2010.06.154 Zheng, C., Cheng, L., Saveliev, A., Luo, Z., & Cen, K. (2011). Gas and solid phase temperature measurements of porous media combustion. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 33, 3301–3308. https://doi.org/10.1016/j.proci.2010.05.037 Tu, J. F., & Paleocrassas, A. G. (2011). Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding. Journal of Materials Processing Technology, 211(1), 95–102. https://doi.org/10.1016/j.jmatprotec.2010.09.001 Xu, F., Lu, W., & Zhu, Y. (2011). Controlled 3D Buckling of Silicon Nanowires for Stretchable Electronics. ACS NANO, 5(1), 672–678. https://doi.org/10.1021/nn103189z Barcellos, W. M., Souza, L. C. E. O., Saveliev, A. V., & Kennedy, L. A. (2011). [Review of Ultra-low-emission steam boiler constituted of reciprocal flow porous burner]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 35(3), 570–580. https://doi.org/10.1016/j.expthermflusci.2010.11.005 Kuznetsov, A. V., Nield, D. A., & Simmons, C. T. (2011). The Onset of Convection in a Strongly Heterogeneous Porous Medium with Transient Temperature Profile. TRANSPORT IN POROUS MEDIA, 86(3), 851–865. https://doi.org/10.1007/s11242-010-9657-x Xu, F., Durham, J. W., III, Wiley, B. J., & Zhu, Y. (2011). Strain-Release Assembly of Nanowires on Stretchable Substrates. ACS NANO, 5(2), 1556–1563. https://doi.org/10.1021/nn103183d Kuznetsov, A. V. (2011). Method of modelling intracellular transport in branching neurites: application to axons and dendrites of Drosophila sensory neurons. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 14(3), 239–251. https://doi.org/10.1080/10255841003664727 Fang, T., & Lee, C.-fon F. (2011). Low sooting combustion of narrow-angle wall-guided sprays in an HSDI diesel engine with retarded injection timings. FUEL, 90(4), 1449–1456. https://doi.org/10.1016/j.fuel.2010.12.031 Morgan, B., Kennedy, A. S., Lewington, V., Jones, B., & Sharma, R. A. (2011). Intra-arterial brachytherapy of hepatic malignancies: Watch the flow. Nature Reviews. Clinical Oncology, 8(2), 115–120. Ghosh, A., Deshmukh, K., & Ngaile, G. (2011). Database for real-time loading path prediction for tube hydroforming using multidimensional cubic spline interpolation. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 211(1), 150–166. https://doi.org/10.1016/j.jmatprotec.2010.09.012 Luo, H., Luo, L., Ali, A., Nourgaliev, R., & Cai, C. (2011). A Parallel, Reconstructed Discontinuous Galerkin Method for the Compressible Flows on Arbitrary Grids. COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 9(2), 363–389. https://doi.org/10.4208/cicp.070210.020610a Peters, K. (2011). [Review of Polymer optical fiber sensors-a review]. SMART MATERIALS AND STRUCTURES, 20(1). https://doi.org/10.1088/0964-1726/20/1/013002 Gupta, K. G., & Echekki, T. (2011). One-dimensional turbulence model simulations of autoignition of hydrogen/carbon monoxide fuel mixtures in a turbulent jet. COMBUSTION AND FLAME, 158(2), 327–344. https://doi.org/10.1016/j.combustflame.2010.09.003 Shi, Q., Vitchuli, N., Nowak, J., Lin, Z., Guo, B., McCord, M., … Zhang, X. (2011). Atmospheric Plasma Treatment of Pre-Electrospinning Polymer Solution: A Feasible Method to Improve Electrospinnability. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 49(2), 115–122. https://doi.org/10.1002/polb.22157 Purser, M. F., Richards, A. L., Cook, R. C., Osborne, J. A., Cormier, D. R., & Buckner, G. D. (2011). A Novel Shape Memory Alloy Annuloplasty Ring for Minimally Invasive Surgery: Design, Fabrication, and Evaluation. ANNALS OF BIOMEDICAL ENGINEERING, 39(1), 367–377. https://doi.org/10.1007/s10439-010-0126-z Vadasz, P., & Kuznetsov, A. V. (2011, January). Special Issue on Heat and Mass Transfer in Biosystems. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 133. https://doi.org/10.1115/1.4002222 Cai, X., & Wu, F. (2011). Multiobjective fault detection and isolation for flexible air-breathing hypersonic vehicle. JOURNAL OF SYSTEMS ENGINEERING AND ELECTRONICS, 22(1), 52–62. https://doi.org/10.3969/j.issn.1004-4132.2011.01.006 Bunget, C., & Ngaile, G. (2011). Influence of ultrasonic vibration on micro-extrusion. ULTRASONICS, 51(5), 606–616. https://doi.org/10.1016/j.ultras.2011.01.001 Kuznetsov, A. V. (2011). Analytical solution of equations describing slow axonal transport based on the stop-and-go hypothesis. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 9(3), 662–673. https://doi.org/10.2478/s11534-010-0066-0 Shi, Q., Vitchuli, N., Ji, L., Nowak, J., McCord, M., Bourham, M., & Zhang, X. (2011). A Facile Approach to Fabricate Porous Nylon 6 Nanofibers Using Silica Nanotemplate. JOURNAL OF APPLIED POLYMER SCIENCE, 120(1), 425–433. https://doi.org/10.1002/app.33161 Kuznetsov, A. V. (2011). A four kinetic state model of fast axonal transport: Model formulation and perturbation solution. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 9(1), 146–156. https://doi.org/10.2478/s11534-010-0032-x