Mechanical and Aerospace Engineering - 1997

Du, H., Ekkad, S. V., & Han, J. C. (1997). Unsteady high turbulence effect on turbine blade film cooling heat transfer performance using a transient liquid crystal technique. NASA Conference Publication, (10195), 239–259. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031345037&partnerID=MN8TOARS

Ekkad, S. V., Zapata, D., & Han, J. C. (1997). Heat transfer coefficients over a flat surface with air and CO<inf>2</inf> injection through compound angle holes using a transient liquid crystal image method. Journal of Turbomachinery, 119(3), 580–586. https://doi.org/10.1115/1.2841161

Ekkad, S. V., Zapata, D., & Han, J. C. (1997). Film effectiveness over a flat surface with air and CO<inf>2</inf>injection through compound angle holes using a transient liquid crystal image method. Journal of Turbomachinery, 119(3), 587–593. https://doi.org/10.1115/1.2841162

Du, H., Ekkad, S., & Han, J.-C. (1997). Effect of unsteady wake with trailing edge coolant ejection on detailed heat transfer coefficient distributions for a gas turbine blade. Journal of Heat Transfer, 119(2), 242–248. https://doi.org/10.1115/1.2824216

Du, H., Han, J.-C., & Ekkad, S. V. (1997). Effect of unsteady wake on detailed heat transfer coefficient and film effectiveness distributions for a gas turbine blade. Proceedings of the ASME Turbo Expo, 3. https://doi.org/10.1115/97-GT-166

Ekkad, S. V., & Ran, J.-C. (1997). Detailed heat transfer distributions on a cylindrical model with simulated TBC spallation. 35th Aerospace Sciences Meeting and Exhibit. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84983098241&partnerID=MN8TOARS

Ekkad, S. V., & Han, J.-C. (1997). Detailed heat transfer distributions in two-pass square channels with rib turbulators. International Journal of Heat and Mass Transfer, 40(11), 2525–2537. https://doi.org/10.1016/S0017-9310(96)00318-3

Du, H., Han, J.-C., & Ekkad, S. V. (1997). Detailed film cooling measurements over a gas turbine blade using a transient liquid crystal image technique. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 350, 245–254. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-4043123444&partnerID=MN8TOARS

Ekkad, S. V., Han, J.-C., & Du, H. (1997). Detailed film cooling measurements on a cylindrical leading edge model: Effect of free-stream turbulence and coolant density. American Society of Mechanical Engineers (Paper). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-0031375134&partnerID=MN8TOARS

Ekkad, S. V., Mehendale, A. B., Han, J. C., & Lee, C. P. (1997). Combined effect of grid turbulence and unsteady wake on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO<inf>2</inf> film injection. Journal of Turbomachinery, 119(3), 594–600. https://doi.org/10.1115/1.2841163

Zamankhan, P., Tafreshi, H., & Chen, J. (1997). Lateral diffusive migration of massive particles in high-velocity vertical pipe flow of moderately dense gas-solid suspensions. Physical Review E, 56(3), 2972–2980. https://doi.org/10.1103/physreve.56.2972

Eischen, J. W., & Clifton, W. (1997). Optimum Manipulation Strategies for Limp Fabric Materials. Proceedings of the Fifth Pan American Congress of Applied Mechanics Conference. Presented at the Fifth Pan American Congress of Applied Mechanics Conference, San Juan, Puerto Rico.

Rui, C., Reyhanoglu, M., Kolmanovsky, I., Cho, S., & McClamroch, N. H. (1997). Nonsmooth stabilization of an underactuated unstable two degrees of freedom mechanical system. Proceedings of the 36th IEEE Conference on Decision and Control. Presented at the 36th IEEE Conference on Decision and Control, San Diego, CA. https://doi.org/10.1109/cdc.1997.652490

McClamroch, N. H., Rui, C., Kolmanobsky, I., & Reyhanoglu, M. (1997). Hybrid closed loop systems: a nonlinear control perspective. Proceedings of the 36th IEEE Conference on Decision and Control. Presented at the 36th IEEE Conference on Decision and Control, San Diego, CA. https://doi.org/10.1109/cdc.1997.650599

Reyhanoglu, M. (1997). Feedback control of a flexible joint robot. 1997 European Control Conference (ECC). Presented at the 1997 European Control Conference (ECC). https://doi.org/10.23919/ecc.1997.7082602

Reyhanoglu, M. (1997). Exponential stabilization of an underactuated autonomous surface vessel. Automatica, 33(12), 2249–2254. https://doi.org/10.1016/s0005-1098(97)00141-6

Saiki, H., Ngaile, G., & Ruan, L. (1997). Influence of die geometry on the workability of conversion coatings combined with soap lubricant in cold forming of steels. Journal of Materials Processing Technology, 63(1-3), 238–243. https://doi.org/10.1016/s0924-0136(96)02629-5

Rabiei, A., Kim, B.-N., Enoki, M., & Kishi, T. (1997). A new method based on simultaneous acoustic emission and in-situ sem observation to evaluate the fracture behavior of metal matrix composites. Scripta Materialia, 37(6), 801–808. https://doi.org/10.1016/s1359-6462(97)00173-5

Echekki, T. (1997). A quasi-one-dimensional premixed flame model with cross-stream diffusion. Combustion and Flame, 110(3), 335–350. https://doi.org/10.1016/S0010-2180(97)00079-5

Saiki, H., Ngaile, G., & Ruan, L. (1997, October). Characterization of adhesive strength of phosphate coatings in cold metal forming. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 119, pp. 667–671. https://doi.org/10.1115/1.2833867

Yang, Y., Gould, R. D., Horie, Y., & Iyer, K. R. (1997). New evidence concerning the shock-induced chemical reaction mechanism in a Ni/Al mixture. Shock compression of condensed matter--1997: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter held at Amherst, Massachusetts, July 27-August 1, 1997, 429, 639–642.

Nagel, O. (1997). The letters of Christina Rossetti. In The letters of Christina Rossetti. Charlottesville: University Press of Virginia.

Zhang, T., Lorenc, S. J., Bernold, L. E., & Lee, G. K. (1997). A computer-controlled multipurpose bridge maintenance robotic system. Computer applications in industry and engineering: Proceedings of the ISCA 10th international conference, San Antonio, Texas, U.S.A., December 10-12, 1997, 90–93. Cary, NC: ISCA.

Smetana, F. O. (1997). Introductory aerodynamics and hydrodynamics of wings and bodies: A software-based approach. Reston, Va.: American Institute of Aeronautics and Astronautics.

Lorenc, S. J., Handlon, B. E., & Bernold, L. E. (1997). Development of a robotic bridge maintenance system. Proceedings of the Fourteenth International Symposium on Automation & Robotics in Construction, Pittsburgh, Pennsylvania, June 8-11, 1997, (1997), 432–436.

Tierney, J. W., & Eischen, J. W. (1997). Residual stress analysis of bimaterial strips under multiple thermal loading. JOURNAL OF ELECTRONIC PACKAGING, 119(4), 281–287. https://doi.org/10.1115/1.2792250

MacKay, J. J., OMalley, D. M., Presnell, T., Booker, F. L., Campbell, M. M., Whetten, R. W., & Sederoff, R. R. (1997, July 22). Inheritance, gene expression, and lignin characterization in a mutant pine deficient in cinnamyl alcohol dehydrogenase. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, Vol. 94, pp. 8255–8260. https://doi.org/10.1073/pnas.94.15.8255

Washington, G. N., & Silverberg, L. (1997). Uniform damping and stiffness control of structures with distributed actuators. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 119(3), 561–565. https://doi.org/10.1115/1.2801294

Ding, X. D., Zbib, H. M., Hamilton, C. H., & Bayoumi, A. E. (1997). On the stability of biaxial stretching with application to the optimization of superplastic blow-forming. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 119(1), 26–31. https://doi.org/10.1115/1.2805969

Hollis, B. R., & Perkins, J. N. (1997). High-enthalpy aerothermodynamics of a Mars entry vehicle part .1. Experimental results. JOURNAL OF SPACECRAFT AND ROCKETS, 34(4), 449–456. https://doi.org/10.2514/2.3257

Hollis, B. R., & Perkins, J. N. (1997). High-enthalpy aerothermodynamics of a Mars entry vehicle .2. Computational results. JOURNAL OF SPACECRAFT AND ROCKETS, 34(4), 457–463. https://doi.org/10.2514/2.3258

Lei, M., Kleinstreuer, C., & Archie, J. P. (1997, August). Hemodynamic simulations and computer aided designs of graft-artery junctions. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 119, pp. 343–348. https://doi.org/10.1115/1.2796099

SheikhAhmad, J., & Bailey, J. A. (1997). Flow instability in the orthogonal machining of CP titanium. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 119(3), 307–313. https://doi.org/10.1115/1.2831108

Yuan, F. G., Pagano, N. J., & Cai, X. (1997). Elastic moduli of brittle matrix composites with interfacial debonding. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 34(2), 177–201. https://doi.org/10.1016/S0020-7683(96)00003-0

Edwards, JR. (1997). A low-diffusion flux-splitting scheme for Navier-Stokes calculations. COMPUTERS & FLUIDS, 26(6), 635–659. https://doi.org/10.1016/S0045-7930(97)00014-5

Gaitonde, D., Shang, J. S., & Edwards, JR. (1997). Structure of a supersonic three-dimensional cylinder/offset-flare turbulent interaction. JOURNAL OF SPACECRAFT AND ROCKETS, 34(3), 294–302. https://doi.org/10.2514/2.3232

Hudson, M. L., Chokani, N., & Candler, G. V. (1997, June). Linear stability of hypersonic flow in thermochemical nonequilibrium. AIAA JOURNAL, Vol. 35, pp. 958–964. https://doi.org/10.2514/2.204

Zikry, M. A., & Kao, M. (1997). Inelastic microstructural failure modes in crystalline materials: The Sigma 33a and Sigma 11 high angle grain boundaries. INTERNATIONAL JOURNAL OF PLASTICITY, 13(4), 403–434. https://doi.org/10.1016/S0749-6419(97)80006-X

Khraisheh, M. K., Zbib, H. M., Hamilton, C. H., & Bayoumi, A. E. (1997). Constitutive modeling of superplastic deformation .1. Theory and experiments. INTERNATIONAL JOURNAL OF PLASTICITY, 13(1-2), 143–164. https://doi.org/10.1016/S0749-6419(97)00005-3

Lamp, A. M., & Chokani, N. (1997). Computation of cavity flows with suppression using jet blowing. JOURNAL OF AIRCRAFT, Vol. 34, pp. 545–551. https://doi.org/10.2514/2.2207

Reddy, M., Jasper, W. J., McGregor, R., & Lee, G. (1997). Effects of temperature and salt on dye mixtures in the batch dyeing process. TEXTILE RESEARCH JOURNAL, 67(2), 109–117. https://doi.org/10.1177/004051759706700206

Raffoul, C. N., Nejad, A. S., Gould, R. D., & Spring, S. A. (1997, April). An experimental and numerical study of the isothermal flowfield behind a bluff body flameholder. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, Vol. 119, pp. 328–339. https://doi.org/10.1115/1.2815579

Jared, B. H., Dow, T. A., Garrard, K. P., Moorefield, G. M., Barnes, C., Day, R. D., … Rivera, G. (1997, July). Fabrication of hydrodynamic instability targets. FUSION TECHNOLOGY, Vol. 31, pp. 501–503. https://doi.org/10.13182/FST97-A30810

Kleinstreuer, C. (1997). Engineering fluid dynamics: An interdisciplinary systems approach. https://doi.org/10.1017/cbo9781139174510

Cuttino, J. F., & Dow, T. A. (1997). Contact between elastic bodies with an elliptic contact interface in torsion. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 64(1), 144–148. https://doi.org/10.1115/1.2787265

Lei, M., Archie, J. P., & Kleinstreuer, C. (1997). Computational design of a bypass graft that minimizes wall shear stress gradients in the region of the distal anastomosis. JOURNAL OF VASCULAR SURGERY, 25(4), 637–646. https://doi.org/10.1016/S0741-5214(97)70289-1

Alexopoulos, G. A., & Hassan, H. A. (1997). k-zeta (enstrophy) compressible turbulence model for mixing layers and wall bounded flows. AIAA JOURNAL, 35(7), 1221–1224. https://doi.org/10.2514/2.219

Yuan, F. G., & Yang, S. (1997). The curved interfacial crack between dissimilar isotropic solids. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 34(6), 641–660. https://doi.org/10.1016/S0020-7683(96)00049-2

Yang, Y., Gould, R. D., Horie, Y., & Iyer, K. R. (1997). Shock-induced chemical reactions in a Ni/Al powder mixture. APPLIED PHYSICS LETTERS, 70(25), 3365–3367. https://doi.org/10.1063/1.119172

Brauns, F. J., & Hassan, H. A. (1997). Novel approach for calculating equilibrium radiating flows. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 11, pp. 52–58. https://doi.org/10.2514/2.6200

Blanchard, A. E., Lachowicz, J. T., & Wilkinson, S. P. (1997, January). NASA Langley Mach 6 quiet wind-tunnel performance. AIAA JOURNAL, Vol. 35, pp. 23–28. https://doi.org/10.2514/2.82

Silverberg, L. (1997). Conjecture about orthogonal functions. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 20(1), 198–202. https://doi.org/10.2514/2.4021

Athavale, S. M., & Strenkowski, J. S. (1997). Material damage-based model for predicting chip-breakability. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 119(4B), 675–680. https://doi.org/10.1115/1.2836808

Yuan, F. G., & Yang, S. (1997). Crack-tip fields in elastic-plastic material under plane stress mode I loading. INTERNATIONAL JOURNAL OF FRACTURE, 85(2), 131–155. https://doi.org/10.1023/A:1007361116709

Wei, Y.-M., & Wang, G. R. (1997). The perturbation theory for the drazin inverse and its applications. Linear Algebra and Its Applications, 258(1997 June), 179–186.

Nyahoro, P. K., Johnson, R. R., & Edwards, J. (1997). Simulated performance of thermal storage in a solar cooker. SOLAR ENERGY, Vol. 59, pp. 11–17. https://doi.org/10.1016/S0038-092X(96)00133-8