Mechanical and Aerospace Engineering - 2002 Acharya, S., Yang, H., Ekkad, S. V., Prakash, C., & Bunker, R. (2002). Numerical simulation of film cooling on the tip of a gas turbine blade. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B, 1051–1062. https://doi.org/10.1115/GT2002-30553 Ekkad, S. V., & Kontrovitz, D. (2002). Jet impingement heat transfer on dimpled target surfaces. International Journal of Heat and Fluid Flow, 23(1), 22–28. https://doi.org/10.1016/S0142-727X(01)00139-4 Yang, H., Acharya, S., Ekkad, S. V., Prakash, C., & Bunker, R. (2002). Numerical simulation of flow and heat transfer past a turbine blade with a squealer-tip. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 A, 295–307. https://doi.org/10.1115/GT2002-30193 Ekkad, S. V., Kontrovitz, D., Nasir, H., Pamula, G., & Acharya, S. (2002). Heat transfer in two-pass turbulated channels connected by holes. Journal of Thermophysics and Heat Transfer, 16(3), 404–414. https://doi.org/10.2514/2.6694 Pramanick, A., & Ekkad, S. V. (2002). Effect of rotation on flow and temperature distributions in a two-pass channel connected by two rows of holes. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 A, 543–550. https://doi.org/10.1115/GT2002-30218 Ekkad, S. V., Gao, L., & Hebert, R. T. (2002). Effect of jet-to-jet spacing in impingement arrays on heat transfer. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 372(4), 237–244. https://doi.org/10.1115/IMECE2002-32108 Yang, H., Acharya, S., Ekkad, S. V., Prakash, C., & Bunker, R. (2002). Flow and heat transfer predictions for a flat-tip turbine blade. American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 A, 271–283. https://doi.org/10.1115/GT2002-30190 Garg, D. P., Zikry, M. A., Anderson, G. L., & Stepp, D. (2002). Health monitoring and reliability of adaptive heterogeneous structures. Structural Health Monitoring, 1(1), 23–39. https://doi.org/10.1177/147592170200100103 Bahei-El-Din, Y. A., Zikry, M. A., & Rajendran, A. (2002). Deformation fields in woven composite plates under impact. ASME International Mechanical Engineering Congress and Exposition, Proceedings, 41–45. https://doi.org/10.1115/IMECE2002-39482 Tafreshi, H. V., Pourdeyhimi, B., Holmes, R., & Shiffler, D. (2002). Numerical Investigation on the Waterjets Issued by Hydroentangling Orifice Nozzles. International Nonwovens Technical Conference (INTC 2002). Presented at the International Nonwovens Technical Conference (INTC 2002), Atlanta, Georgia. Tafreshi, H. V., & Pourdeyhimi, B. (2002). Numerical Simulation of Hydroentangling Orifice Flow. The Fiber Society. Presented at the Fiber Society, Natick, Massachusetts. Tafreshi, H. V., & Pourdeyhimi, B. (2002). The Role of Baffles in Fiber Dispersion in Mixing Tanks. The Fiber Society. Presented at the Fiber Society, Natick, Massachusetts. Tafreshi, H. V., Piseri, P., & Milani, P. (2002). A Simulation on the Effect of Brownian Motion on Nanoparticle Transport in a Pulsed Micro-plasma Cluster Source. Annual Conference of the American Association for Aerosol Research (AAAR). Presented at the Annual Conference of the American Association for Aerosol Research (AAAR), Charlotte, North Carolina. Di Fonzo, F., Piseri, P., Tafreshi, H. V., & Milani, P. (2002). Nano-cluster Beam Focusing in an Aerodynamic Lens System. Annual Conference of the American Association for Aerosol Research (AAAR). Presented at the Annual Conference of the American Association for Aerosol Research (AAAR), Charlotte, North Carolina. Tafreshi, H. V., Benedek, G., Piseri, P., Vinati, S., Barborini, E., & Milani, P. (2002). A Simple Nozzle Configuration for the Production of Low Divergence Supersonic Cluster Beam by Aerodynamic Focusing. Aerosol Science and Technology, 36(5), 593–606. https://doi.org/10.1080/02786820252883838 Eischen, J. W., Love, B. M., Dow, T. A., & Scattergood, R. O. (2002). Laser Scribing for Use as a Precision Shaping Technique. Proceedings of the Seventh Pan American Congress of Applied Mechanics. Temuco, Chile. Fang, T. (2002). Similarity solution of thermal boundary layers for laminar narrow axisymmetric jets. International Journal of Heat and Fluid Flow, 23(6), 840–843. https://doi.org/10.1016/S0142-727X(02)00198-4 Fang, T. (2002). An extension of wien's displacement law for blackbody radiation. International Communications in Heat and Mass Transfer, 29(6), 757–761. https://doi.org/10.1016/S0735-1933(02)00366-4 Mckay, N. J., & Gopalarathnam†, A. (2002). The Effects of Wing Aerodynamics on Race Vehicle Performance. SAE Technical Paper Series. Presented at the Motorsports Engineering Conference & Exhibition. https://doi.org/10.4271/2002-01-3294 Hewson, J. C., Kerstein, A. R., & Echekki, T. (2002). One-dimensional stochastic simulation of advection-diffusion-reaction couplings in turbulent combustion. In Fluid Mechanics and its Applications (Vol. 70, pp. 113–124). https://doi.org/10.1007/978-94-017-1998-8_9 Echekki, T., & Chen, J. H. (2002). High-temperature combustion in autoigniting non-homogeneous hydrogen/air mixtures. Proceedings of the Combustion Institute, 29(2), 2061–2068. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84915794542&partnerID=MN8TOARS Bingue, J. P., Saveliev, A. V., Fridman, A. A., & Kennedy, L. A. (2002, June). Hydrogen sulfide filtration combustion: comparison of theory and experiment. EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol. 26, pp. 409–415. https://doi.org/10.1016/s0894-1777(02)00151-6 Merchan-Merchan, W., Saveliev, A., Kennedy, L. A., & Fridman, A. (2002). Formation of carbon nanotubes in counter-flow, oxy-methane diffusion flames without catalysts. CHEMICAL PHYSICS LETTERS, 354(1-2), 20–24. https://doi.org/10.1016/s0009-2614(02)00027-1 Kennedy, L. A., Saveliev, A. V., Bingue, J. P., & Ridman, A. A. (2002). Filtration combustion of a methane wave in air for oxygen-enriched and oxygen-depleted environments. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 29, pp. 835–841. https://doi.org/10.1016/s1540-7489(02)80107-9 Cengel, Y. A., & Boles, M. A. (2002). Thermodynamics: an engineering approach. (4th ed.). Boston: McGraw-Hill. McAvoy, C. W., & Gopalarathnam, A. (2002). Automated cruise flap for airfoil drag reduction over a large lift range. JOURNAL OF AIRCRAFT, 39(6), 981–988. https://doi.org/10.2514/2.3051 Tafreshi, H. V., Piseri, P., Barborini, E., Benedek, G., & Milani, P. (2002). Simulation on the effect of Brownian motion on nanoparticle trajectories in a pulsed microplasma cluster source. JOURNAL OF NANOPARTICLE RESEARCH, 4(6), 511–524. https://doi.org/10.1023/A:1022845401781 Ma, N. (2002). Models of mass transport during microgravity crystal growth of alloyed semiconductor crystals in a magnetic field. NASA Microgravity Materials Science Conference proceedings, NASA/CP-2003-212339, 380–382. Huntsville, Ala.: NASA. Watson, K. A., Lyons, K. M., Carter, C. D., & Donbar, J. M. (2002). Simultaneous two-shot CH planar laser-induced fluorescence and particle image velocimetry measurements in lifted CH4/air diffusion flames. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 29, pp. 1905–1912. https://doi.org/10.1016/S1540-7489(02)80231-0 Xiong, Y., & Roberts, W. L. (2002). Observations on the interaction between a premixed flame kernel and a vortex of different equivalence ratio. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 29, pp. 1687–1693. https://doi.org/10.1016/S1540-7489(02)80207-3 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2002). Micro-particle transport and deposition in a human oral airway model. JOURNAL OF AEROSOL SCIENCE, 33(12), 1635–1652. https://doi.org/10.1016/S0021-8502(02)00122-2 Aparecido, J. B., & Ozisik, M. N. (2002). Nonlinear parameter estimation in laminar forced convection within a circular sector tube. INVERSE PROBLEMS IN ENGINEERING, 10(6), 503–522. https://doi.org/10.1080/106827603100015659 Solano, E., Dumas, R. D., Harrison, K. W., Ranjithan, S. R., Barlaz, M. A., & Brill, E. D. (2002). Life-cycle-based solid waste management. II: Illustrative applications. Journal of Environmental Engineering (New York, N.Y.), 128(10), 993–1005. https://doi.org/10.1061/(asce)0733-9372(2002)128:10(993) Solano, E., Ranjithan, S. R., Barlaz, M. A., & Brill, E. D. (2002). Life-cycle-based solid waste management. I: Model development. Journal of Environmental Engineering (New York, N.Y.), 128(10), 981–992. https://doi.org/10.1061/(asce)0733-9372(2002)128:10(981) Raghuveer, M. S., Yoganand, S. N., Jagannadham, K., Lemaster, R. L., & Bailey, J. (2002). Improved CVD diamond coatings on WC-Co tool substrates. WEAR, 253(11-12), 1194–1206. https://doi.org/10.1016/S0043-1648(02)00244-2 Truzzi, G. E., Sarma, G. R., & Chokani, N. (2002). Constant voltage anemometer operated hot wire at subsonic speeds over wide overheats in unsteady flows. REVIEW OF SCIENTIFIC INSTRUMENTS, 73(12), 4363–4368. https://doi.org/10.1063/1.1516850 Buckner, G. D. (2002). Intelligent bounds on modeling uncertainty: Applications to sliding mode control. IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS PART C-APPLICATIONS AND REVIEWS, 32(2), 113–124. https://doi.org/10.1109/TSMCC.2002.801350 Nield, D. A., Kuznetsov, A. V., & Xiong, M. (2002). Effect of local thermal non-equilibrium on thermally developing forced convection in a porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 45(25), 4949–4955. https://doi.org/10.1016/S0017-9310(02)00203-X Morton, J. L., Ma, N., Bliss, D. F., & Bryant, G. G. (2002). Dopant segregation during liquid-encapsulated Czochralski crystal growth in a steady axial magnetic field. JOURNAL OF CRYSTAL GROWTH, 242(3-4), 471–485. https://doi.org/10.1016/S0022-0248(02)01425-2 Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 2: Surface integrity and roundness. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 708–714. https://doi.org/10.1115/1.1475989 Masuda, A., & Noori, M. (2002). Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 37(8), 1375–1386. https://doi.org/10.1016/S0020-7462(02)00024-0 Vestroni, F., & Noori, M. (2002, December). Hysteresis in mechanical systems - modeling and dynamic response. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Vol. 37, pp. 1261–1262. https://doi.org/10.1016/S0020-7462(02)00059-8 Tafreshi, H., Benedek, G., Zamankhan, P., & Sarkomaa, P. (2002). Diffusive behavior and structural characterization of a hard-sphere fluid through a narrow channel with roughened walls. CANADIAN JOURNAL OF PHYSICS, 80(7), 723–731. https://doi.org/10.1139/P02-016 Qu, J., Shih, A. J., & Scattergood, R. O. (2002). Development of the cylindrical wire electrical discharge machining process, part 1: Concept, design, and material removal rate. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 702–707. https://doi.org/10.1115/1.1475321 Zhang, Z., & Kleinstreuer, C. (2002). Transient airflow structures and particle transport in a sequentially branching lung airway model. Physics of Fluids (Woodbury, N.Y.), 14(2), 862–880. https://doi.org/10.1063/1.1433495 Li, Y. Y., Roberts, W. L., & Brown, M. S. (2002, June). Investigation of gaseous acoustic damping rates by transient grating spectroscopy. AIAA JOURNAL, Vol. 40, pp. 1071–1077. https://doi.org/10.2514/2.1790 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2002). Cyclic micron-size particle inhalation and deposition in a triple bifurcation lung airway model. JOURNAL OF AEROSOL SCIENCE, 33(2), 257–281. https://doi.org/10.1016/S0021-8502(01)00170-7 Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2002). Aerosol deposition efficiencies and upstream release positions for different inhalation modes in an upper bronchial airway model. AEROSOL SCIENCE AND TECHNOLOGY, 36(7), 828–844. https://doi.org/10.1080/02786820290092078 Sheikh-Ahmad, J. Y., & Morita, T. (2002). Tool coatings for wood machining: Problems and prospects. Forest Products Journal, 52(10), 43–51. Shih, A. J., & Yan, H. S. (2002). Synthesis of a single-loop, overconstrained six revolute joint spatial mechanism for two-position cylindrical rigid body guidance. MECHANISM AND MACHINE THEORY, 37(1), 61–73. https://doi.org/10.1016/S0094-114X(01)00055-6 Mao, D., Edwards, JR, Kuznetsov, A. V., & Srivastava, R. (2002). Particle flow, mixing, and chemical reaction in circulating fluidized bed absorbers. CHEMICAL ENGINEERING SCIENCE, 57(15), 3107–3117. https://doi.org/10.1016/S0009-2509(02)00168-9 Gopalarathnam, A., & Selig, M. S. (2002). Hybrid inverse airfoil design method for complex three-dimensional lifting surfaces. JOURNAL OF AIRCRAFT, Vol. 39, pp. 409–417. https://doi.org/10.2514/2.2966 Farrell, M. V., & Ma, N. (2002). Coupling of buoyant convections in boron oxide and a molten semiconductor in a vertical magnetic field. Journal of Heat Transfer, 124(4), 643–649. https://doi.org/10.1115/1.1473141 Zhang, Z., Kleinstreuer, C., Kim, C. S., & Hickey, A. J. (2002). Aerosol transport and deposition in a triple bifurcation bronchial airway model with local tumors. INHALATION TOXICOLOGY, 14(11), 1111–1133. https://doi.org/10.1080/08958370290084809 Rhoney, B. K., Shih, A. J., Scattergood, R. O., Akemon, J. L., Gust, D. J., & Grant, M. B. (2002). Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42(12), 1355–1362. https://doi.org/10.1016/S0890-6955(02)00056-1 Rhoney, B. K., Shih, A. J., Scattergood, R. O., Ott, R., & McSpadden, S. B. (2002). Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining. WEAR, 252(7-8), 644–653. https://doi.org/10.1016/S0043-1648(02)00019-4 Kuznetsov, A. V., Cheng, L., & Xiong, M. (2002). Effects of thermal dispersion and turbulence in forced convection in a composite parallel-plate channel: Investigation of constant wall heat flux and constant wall temperature cases. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 42(4), 365–383. https://doi.org/10.1080/10407780290059602 Odman, M. T., Russell, A. G., Srivastava, R. K., & McRae, D. S. (2002). Simulation of a reacting pollutant puff using an adaptive grid algorithm, by R.K. Srivastava et al. - Reply. Journal of Geophysical Research. Atmospheres, 107(D22), 4644–4641. Mao, D., Edwards, JR, Kuznetsov, A. V., & Srivastava, R. (2002). A model for fine particle agglomeration in circulating fluidized bed absorbers. HEAT AND MASS TRANSFER, 38(4-5), 379–388. https://doi.org/10.1007/S002310100260 Kuznetsov, A. V., & Avramenko, A. A. (2002). A 2D analysis of stability of bioconvection in a fluid saturated porous medium - Estimation of the critical permeability value. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 29(2), 175–184. https://doi.org/10.1016/S0735-1933(02)00308-1 Ma, N. (2002). Solutal convection during melt growth of alloyed semiconductor crystals in a steady magnetic field. AIAA Aerospace Sciences Meeting and Exhibit (40th: Reno, NV, 2002). (AIAA paper; no. 2002-1113). Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2002). Gas-solid two-phase flow in a triple bifurcation lung airway model. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 28(6), 1021–1046. https://doi.org/10.1016/S0301-9322(02)00011-3 Walker, J. S., & Ma, N. (2002). Convective mass transport during bulk growth of semiconductor crystals with steady magnetic fields. Annual Review of Heat Transfer, 12(2002), 223–263. Ashmawi, W. M., & Zikry, M. A. (2002). Prediction of grain-boundary interfacial mechanisms in polycrystalline materials. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 124(1), 88–96. https://doi.org/10.1115/1.1421611 Peters, K., Pattis, P., & Botsis, J. (2002). Novel technique to measure axial strain distribution along fiber during pullout test. JOURNAL OF MATERIALS SCIENCE LETTERS, 21(11), 887–891. https://doi.org/10.1023/A:1015734914877 Kim, D. S., Kim, W. S., & Kuznetsov, A. V. (2002). Analysis of coupled turbulent flow and solidification in the wedge-shaped pool with different nozzles during twin-roll strip casting. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 41(1), 1–17. https://doi.org/10.1080/104077802317221410 Khechfe, H., Noori, M., Hou, Z., Kelly, J. M., & Ahmadi, G. (2002). An experimental study on the seismic response of base-isolated secondary systems. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 124(1), 81–88. https://doi.org/10.1115/1.1445795 Studer, M., Pietrzyk, J., Peters, K., Botsis, J., & Giaccari, P. (2002). Studies on bridging tractions - simultaneous bridging tractions and COD measurements. INTERNATIONAL JOURNAL OF FRACTURE, 114(4), 379–399. https://doi.org/10.1023/A:1015798126787 Kuznetsov, A. V., & Xiong, M. (2002). Effect of evaporation on thin film deposition in dip coating process. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 29(1), 35–44. https://doi.org/10.1016/S0735-1933(01)00322-0 Kuznetsov, A. V., & Xiong, M. (2002). Dependence of microporosity formation on the direction of solidification. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 29(1), 25–34. https://doi.org/10.1016/S0735-1933(01)00321-9 Loh, B. G., Hyun, S., Ro, P. I., & Kleinstreuer, C. (2002). Acoustic streaming induced by ultrasonic flexural vibrations and associated enhancement of convective heat transfer. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 111(2), 875–883. https://doi.org/10.1121/1.1433811 Tan, K., Grigoriadis, K. M., & Wu, F. (2002). Output-feedback control of LPV sampled-data systems. INTERNATIONAL JOURNAL OF CONTROL, 75(4), 252–264. https://doi.org/10.1080/00207170110101775 Yuan, F. G., & Yang, S. (2002). Crack-tip fields in anisotropic shells. INTERNATIONAL JOURNAL OF FRACTURE, 113(4), 309–326. https://doi.org/10.1023/A:1014245311814 Maday, C. J. (2002). The foundation of the Sommerfeld transformation. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 124(3), 645–646. https://doi.org/10.1115/1.1467596 Echekki, T., & Chen, J. H. (2002). High-temperature combustion in autoigniting non-homogeneous hydrogen/air mixtures. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 29, pp. 2061–2068. https://doi.org/10.1016/S1540-7489(02)80251-6 Gopalarathnam, A., & McAvoy, C. W. (2002). Effect of airfoil characteristics on aircraft performance. JOURNAL OF AIRCRAFT, 39(3), 427–433. https://doi.org/10.2514/2.2968 Saadat, S., Salichs, J., Noori, M., Hou, Z., Davoodi, H., Bar-On, I., … Masuda, A. (2002). An overview of vibration and seismic applications of NiTi shape memory alloy. SMART MATERIALS & STRUCTURES, 11(2), 218–229. https://doi.org/10.1088/0964-1726/11/2/305 Kim, C., & Ro, P. I. (2002). An accurate full car ride model using model reducing techniques. JOURNAL OF MECHANICAL DESIGN, 124(4), 697–705. https://doi.org/10.1115/1.1503065 Seelecke, S. (2002). Modeling the dynamic behavior of shape memory alloys. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 37(8), 1363–1374. https://doi.org/10.1016/S0020-7462(02)00030-6 Strenkowski, J. S., Shih, A. J., & Lin, J. C. (2002). An analytical finite element model for predicting three-dimensional tool forces and chip flow. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 42(6), 723–731. https://doi.org/10.1016/S0890-6955(01)00162-6 Tran, C. M., & Southward, S. C. (2002). A Virtual Sensing method for tonal ANVC systems. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 124(1), 35–40. https://doi.org/10.1115/1.1435642 Fleming, J. G., Johnson, R. R., & Cheng, J. (2002). Validation of a three dimensional covered lagoon simulation. Animal Residuals 2002: Agricultural Animal Manure Management, Policy and Technology (Washington, DC).