Mechanical & Aerospace Engineering - 2005

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2005). A Study on Hydroentangling Waterjets. International Nonwoven Technical Conference (INTC 2005). Presented at the International Nonwoven Technical Conference (INTC 2005), St. Louis, Missouri.

Tafreshi, H. V., Maze, B., & Pourdeyhimi, B. (2005). Water Flow Simulation in Nonwovens Made of Hydrophilic and Non-hydrophilic Fibers. Belt-wide Cotton Conference. Presented at the Belt-wide Cotton Conference, New Orleans, Louisiana.

Benedek, G., Vahedi Tafreshi, H., Podesta’, A., & Milani, P. (2005). FRACTAL GROWTH OF CARBON SCHWARZITES. Presented at the Proceedings of the 31st Workshop of the International School of Solid State Physics. https://doi.org/10.1142/9789812701558_0017

Ngaile, G., & Shirgaokar, M. (2005). Near-Net shape forging and new development. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040319

Ngaile, G., Shirgaokar, M., & Shen, G. (2005). Process Modeling in Impression-Die Forging Using Finite-Element Analysis. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040193

Ngaile, G., & Gariety, M. (2005). Friction and Lubrication. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040067

Ngaile, G. (2005). Plastic Deformation: Complex state of stress and flow rules. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040051

Ngaile, G., & Shirgaokar, M. (2005). Plastic Deformation: Strain and Strain Rate. In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications. https://doi.org/10.31399/asm.tb.chffa.t51040017

Altan, T., Ngaile, G., & Shen, G. (2005). Cold and Hot Metal Forging: Fundamentals and Applications. Materials Park, OH: ASM International.

Woody, S. C., Smith, S. T., Jiang, X., & Rehrig, P. W. (2005). Performance of single-crystal Pb(Mg1∕3Nb2∕3)-32%PbTiO3 stacked actuators with application to adaptive structures. Review of Scientific Instruments, 76(7), 075112. https://doi.org/10.1063/1.1984974

Zhan, C., Wu, J., Yin, S., & Jiang, X. (2005). Strong, high-frequency, ac electric-field-induced rhombohedra-tetragonal phase transition in Pb(Mg1∕3Nb2∕3)O3–PbTiO3 single crystal. Journal of Applied Physics, 97(7), 074107. https://doi.org/10.1063/1.1881794

Dong, S., Yan, L., Wang, N., Viehland, D., Jiang, X., Rehrig, P., & Hackenberger, W. (2005). A small, linear, piezoelectric ultrasonic cryomotor. Applied Physics Letters, 86(5), 053501. https://doi.org/10.1063/1.1855424

Coffey, S. L., Mazzoleni, A. P., Luu, K. K., & Glover, R. A. (2005). Spaceflight mechanics 2004 : proceedings of the 14th AAS/AIAA Space flight mechanics meeting held 8-12 February 2004, Maui, Hawaii. Presented at the 14th AAS/AIAA Space Flight Mechanics Meeting, Maui, Hawai'i.

Mahindrakar, A. D., Banavar, R. N., & Reyhanoglu, M. (2005). Controllability and Point-to-Point Control of 3-DOF Planar Horizontal Underactuated Manipulators. International Journal of Control, 78(1), 1–13. https://doi.org/10.1080/00207170412331317422

Löhner, R., Luo, H., & Baum, J. D. (2005). Selective edge removal for unstructured grids with Cartesian cores. Journal of Computational Physics, 206(1), 208–226. https://doi.org/10.1016/j.jcp.2004.11.034

Fang, T., & Lee, C.-fon F. (2005). Exact solutions of incompressible Couette flow with porous walls for slightly rarefied gases. Heat and Mass Transfer, 42(3), 255–262. https://doi.org/10.1007/s00231-005-0009-2

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2005). Low temperature combustion within a small bore high speed direct injection (HSDI) diesel engine. SAE Technical Papers. https://doi.org/10.4271/2005-01-0919

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2005). Liquid and vapor fuel distributions within a High Speed Direct Injection (HSDI) diesel engine operating in HCCI and conventional combustion modes. SAE Technical Papers. https://doi.org/10.4271/2005-01-3838

Zhu, Y., & Espinosa, H. D. (2005). An electromechanical material testing system for in situ electron microscopy and applications. Proceedings of the National Academy of Sciences, 102(41), 14503–14508. https://doi.org/10.1073/pnas.0506544102

Bažant, Z. P., Guo, Z., Espinosa, H. D., Zhu, Y., & Peng, B. (2005). Epitaxially influenced boundary layer model for size effect in thin metallic films. Journal of Applied Physics, 97(7), 073506. https://doi.org/10.1063/1.1861150

Zhu, Y., Moldovan, N., & Espinosa, H. D. (2005). A microelectromechanical load sensor for in situ electron and x-ray microscopy tensile testing of nanostructures. Applied Physics Letters, 86(1), 013506. https://doi.org/10.1063/1.1844594

Holzbaur, K. R. S., Murray, W. M., & Delp, S. L. (2005). A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control. Annals of Biomedical Engineering, 33(6), 829–840. https://doi.org/10.1007/S10439-005-3320-7

Prabhugoud, M., & Peters, K. (2005). Birefringence and Transverse Strain Sensitivity in Bragg Grating Sensors. In Sensing Issues in Civil Structural Health Monitoring (pp. 433–442). https://doi.org/10.1007/1-4020-3661-2_43

Muller, M., Moilanen, P., Bossy, E., Nicholson, P., Kilappa, V., Timonen, J., … Laugier, P. (2005). Comparison of three ultrasonic axial transmission methods for bone assessment. Ultrasound in Medicine & Biology, 31(5), 633–642. https://doi.org/10.1016/j.ultrasmedbio.2005.02.001

Fang, T., & Lee, C.-fon F. (2005). A moving-wall boundary layer flow of a slightly rarefied gas free stream over a moving flat plate. Applied Mathematics Letters, 18(5), 487–495. https://doi.org/10.1016/j.aml.2004.08.006

Montoya, J. C., Chang, C.-H., Heilmann, R. K., & Schattenburg, M. L. (2005). Doppler writing and linewidth control for scanning beam interference lithography. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 23(6), 2640. https://doi.org/10.1116/1.2127938

Xu, C., & Shin, Y. C. (2005). Design of a multilevel fuzzy controller for nonlinear systems and stability analysis. IEEE Transactions on Fuzzy Systems, 13(6), 761–778. https://doi.org/10.1109/TFUZZ.2005.859308

Luo, H., Baum, J. D., & Lohner, R. (2005). High-Reynolds number viscous flow computations using an unstructured-grid method. JOURNAL OF AIRCRAFT, Vol. 42, pp. 483–492. https://doi.org/10.2514/1.7575

Luo, H., Baum, J. D., & Lohner, R. (2005, June). Extension of Harten-Lax-van Leer scheme for flows at all speeds. AIAA JOURNAL, Vol. 43, pp. 1160–1166. https://doi.org/10.2514/1.7567

Lock, E. H., Saveliev, A. V., & Kennedy, L. A. (2005, April). Initiation of pulsed corona discharge under supercritical conditions. IEEE TRANSACTIONS ON PLASMA SCIENCE, Vol. 33, pp. 850–853. https://doi.org/10.1109/tps.2005.845302

Contarin, F., Barcellos, W. M., Saveliev, A. V., & Kennedy, L. A. (2005). Energy extraction from a porous media reciprocal flow burner with embedded heat exchangers. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 127(2), 123–130. https://doi.org/10.1115/1.1844539

Silvestrini, M., Merchan-Merchan, W., Richter, H., Saveliev, A., & Kennedy, L. A. (2005). Fullerene formation in atmospheric pressure opposed flow oxy-flames. PROCEEDINGS OF THE COMBUSTION INSTITUTE, Vol. 30, pp. 2545–2552. https://doi.org/10.1016/j.proci.2004.08.238

Basic experiments in PID control for engineers. (2005). Boston : Pearson/Custom Publishing.

Sohn, A., Garrard, K. P., & Dow, T. A. (2005). Polar coordinate-based profilometer and methods. Washington, DC: U.S. Patent and Trademark Office.

Yang, S., & Yuan, F. G. (2005). Transient wave propagation of isotropic plates using a higher-order plate theory. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 42(14), 4115–4153. https://doi.org/10.1016/j.ijsolstr.2004.12.014

Bakkal, M., Shih, A. J., McSpadden, S. B., & Scattergood, R. O. (2005). Thrust force, torque, and tool wear in drilling the bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 863–872. https://doi.org/10.1016/j.ijmachtools.2004.11.005

Kuznetsov, A. (2005). The onset of bioconvection in a suspension of negatively geotactic microorganisms with high-frequency vertical vibration. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(9), 1119–1127. https://doi.org/10.1016/j.icheatmasstransfer.2005.05.004

Xiao, J., Austin, E., & Roberts, W. L. (2005). Relative polycyclic aromatic hydrocarbon concentrations in unsteady counterflow diffusion flames. COMBUSTION SCIENCE AND TECHNOLOGY, 177(4), 691–713. https://doi.org/10.1080/00102200590917239

Chitrphiromsri, P., & Kuznetsov, A. V. (2005). Porous medium model for investigating transient heat and moisture transport in firefighter protective clothing under high-intensity thermal exposure. Journal of Porous Media, 8(5), 511–528. https://doi.org/10.1615/jpormedia.v8.i5.80

Marley, S. K., & Roberts, W. L. (2005). Measurements of laminar burning velocity and Markstein number using high-speed chemiluminescence imaging. COMBUSTION AND FLAME, 141(4), 473–477. https://doi.org/10.1016/j.combustflame.2005.02.011

Baucom, J. N., & Zikry, M. A. (2005). Low-velocity impact damage progression in woven E-glass composite systems. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 36(5), 658–664. https://doi.org/10.1016/j.compositesa.2004.07.008

Bakkal, M., Shih, A. J., McSpadden, S. B., Liu, C. T., & Scattergood, R. O. (2005). Light emission, chip morphology, and burr formation in drilling the bulk metallic glass. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 741–752. https://doi.org/10.1016/j.ijmachtools.2004.11.004

Cheng, L., & Kuznetsov, A. V. (2005). Investigation of laminar flow in a helical pipe filled with a fluid saturated porous medium. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 24(3), 338–352. https://doi.org/10.1016/j.euromechflu.2004.08.002

Cheng, L. P., & Kuznetsov, A. V. (2005). Heat transfer in a laminar flow in a helical pipe filled with a fluid saturated porous medium. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 44(8), 787–798. https://doi.org/10.1016/j.ijthermalsci.2004.12.009

Kim, G., Kim, Y., & Ihm, J. (2005). Encapsulation and polymerization of acetylene molecules inside a carbon nanotube. Chemical Physics Letters, 416(06-Apr), 279–282.

Kuznetsov, A. V., & Avramenko, A. A. (2005). Effect of fouling on stability of bioconvection of gyrotactic microorganisms in a porous medium. JOURNAL OF POROUS MEDIA, 8(1), 45–53. https://doi.org/10.1615/JPorMedia.v8.i1.40

Silverberg, L., & Levedahl, B. A. (2005). Autonomous coordination of aircraft formations using direct and nearest-neighbor approaches. JOURNAL OF AIRCRAFT, 42(2), 469–477. https://doi.org/10.2514/1.6868

Terry, S. D., & Lyons, K. M. (2005). Low Reynolds number turbulent lifted flames in high co-flow. COMBUSTION SCIENCE AND TECHNOLOGY, 177(11), 2091–2112. https://doi.org/10.1080/00102200500240489

Jepson, J. K., & Gopalarathnam, A. (2005). Inverse design of adaptive airfoils with aircraft performance considerations. Journal of Aircraft, 42(6), 1622–1630.

Ranganath, B., & Echekki, T. (2005). Effects of preferential and differential diffusion on the mutual annihilation of two premixed hydrogen-air flames. COMBUSTION THEORY AND MODELLING, 9(4), 659–672. https://doi.org/10.1080/13647830500294006

Longest, P. W., & Kleinstreuer, C. (2005). Computational models for simulating multicomponent aerosol evaporation in the upper respiratory airways. AEROSOL SCIENCE AND TECHNOLOGY, 39(2), 124–138. https://doi.org/10.1080/027868290908786

Koo, J., & Kleinstreuer, C. (2005). Analysis of surface roughness effects on heat transfer in micro-conduits. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(13), 2625–2634. https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.024

Li, Y. Y., Roberts, W. L., Brown, M. S., & Gord, JR. (2005). Acoustic damping rate measurements in binary mixtures of atomic species via transient-grating spectroscopy. EXPERIMENTS IN FLUIDS, 39(4), 687–693. https://doi.org/10.1007/s00348-005-1012-6

Silverberg, L., & Duval, L. (2005). Transpermanent magnetics using alternating uniform linear stacks. JOURNAL OF MECHANICAL DESIGN, 127(4), 679–687. https://doi.org/10.1115/1.1897743

Zeng, T. F., & Sun, T. (2005). Size effect of nanoparticles in chemical mechanical polishing - A transient model. IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 18(4), 655–663. https://doi.org/10.1109/TSM.2005.858508

Baldwin, E., Thomas, B., Lee, J. W., & Rabiei, A. (2005). Processing TiPdNi base thin-film shape memory alloys using ion beam assisted deposition. SURFACE & COATINGS TECHNOLOGY, 200(7), 2571–2579. https://doi.org/10.1016/j.surfcoat.2004.08.172

Longest, P. W., Kleinstreuer, C., & Deanda, A. (2005, December). Numerical simulation of wall shear stress and particle-based hemodynamic parameters in pre-cuffed and streamlined end-to-side anastomoses. ANNALS OF BIOMEDICAL ENGINEERING, Vol. 33, pp. 1752–1766. https://doi.org/10.1007/s10439-005-7784-2

King, R. M., & Gopalarathnam, A. (2005). Ideal aerodynamics of ground effect and formation flight. JOURNAL OF AIRCRAFT, Vol. 42, pp. 1188–1199. https://doi.org/10.2514/1.10942

Yang, M., & Ma, N. (2005). Free convection in a liquid-encapsulated molten semiconductor in a vertical magnetic field. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(19-20), 4010–4018. https://doi.org/10.1016/j.ijheatmasstransfer.2005.04.019

Lin, X., & Yuan, F. G. (2005). Experimental study applying a migration technique in structural health monitoring. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 4(4), 341–353. https://doi.org/10.1177/1475921705057973

Li, Z., Kleinstreuer, C., & Farber, M. (2005). Computational analysis of biomechanical contributors to endovascular graft failure. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, 4(4), 221–234. https://doi.org/10.1007/s10237-005-0003-0

Kuniholm, J. F., Buckner, G. D., Nifong, W., & Orrico, M. (2005). Automated knot tying for fixation in minimally invasive, robot-assisted cardiac surgery. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 127(6), 1001–1008. https://doi.org/10.1115/1.2055307

Jin, Y., & Yuan, F. G. (2005). Atomistic simulations of J-integral in 2D graphene nanosystems. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 5(12), 2099–2107. https://doi.org/10.1166/jnn.2005.414

Seelecke, S., Kim, S. J., Ball, B. L., & Smith, R. C. (2005). A rate-dependent two-dimensional free energy model for ferroelectric single crystals. CONTINUUM MECHANICS AND THERMODYNAMICS, 17(4), 337–350. https://doi.org/10.1007/s00161-005-0207-7

Dixit, R. K., & Buckner, G. D. (2005). Sliding mode observation and control for semiactive vehicle suspensions. VEHICLE SYSTEM DYNAMICS, 43(2), 83–105. https://doi.org/10.1080/00423110412331290455

Lu, B., Wu, F., & Kim, S. W. (2005). Linear parameter-varying antiwindup compensation for enhanced flight control performance. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Vol. 28, pp. 494–505. https://doi.org/10.2514/1.4952

Tolson, R. H., Dwyer, A. M., Hanna, J. L., Keating, G. M., George, B. E., Escalera, P. E., & Werner, M. R. (2005). Application of accelerometer data to Mars Odyssey aerobraking and atmospheric modeling. JOURNAL OF SPACECRAFT AND ROCKETS, 42(3), 435–443. https://doi.org/10.2514/1.15173

Stevens, J. M., & Buckner, G. D. (2005). Actuation and control strategies for miniature robotic surgical systems. Journal of Dynamic Systems, Measurement, and Control, 127(4), 537–549. https://doi.org/10.1115/1.2098892

Comins, D. L., & Sahn, J. J. (2005). A six-step asymmetric synthesis of (+)-hyperaspine. ORGANIC LETTERS, 7(23), 5227–5228. https://doi.org/10.1021/ol052068v

Holmes, A. M., Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Vertical gradient freezing using submerged heater growth with rotation and with weak magnetic and electric fields. International Journal of Heat and Fluid Flow, 26(5), 792–800.

Kuznetsov, A. V. (2005). The onset of bioconvection in a suspension of gyrotactic microorganisms in a fluid layer of finite depth heated from below. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(5), 574–582. https://doi.org/10.1016/j.icheatmasstransfer.2004.10.021

Geng, P., & Kuznetsov, A. V. (2005). Settling of bidispersed small solid particles in a dilute suspension containing gyrotactic micro-organisms. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 43(11-12), 992–1010. https://doi.org/10.1016/j.ijengsci.2005.03.002

Jin, Y., & Yuan, F. G. (2005). Nanoscopic modeling of fracture of 2D graphene systems. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 5(4), 601–608. https://doi.org/10.1166/jnn.2005.071

Gutierrez, H. M., & Ro, P. I. (2005). Magnetic servo levitation by sliding-mode control of nonaffine systems with algebraic input invertibility. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 52(5), 1449–1455. https://doi.org/10.1109/TIE.2005.855651

Avramenko, A. A., & Kuznetsov, A. V. (2005). Linear instability analysis of a suspension of oxytactic bacteria in superimposed fluid and porous layers. TRANSPORT IN POROUS MEDIA, 61(2), 157–175. https://doi.org/10.1007/s11242-004-7462-0

Avramenko, A. A., Kuznetsov, A. V., Basok, B. I., & Blinov, D. G. (2005). Investigation of stability of a laminar flow in a parallel-plate channel filled with a fluid saturated porous medium. PHYSICS OF FLUIDS, 17(9). https://doi.org/10.1063/1.2041607

Lemaster, R. L., Shih, A. J., & Yu, Z. (2005). Blasting and erosion wear of wood using sodium bicarbonate and plastic media. Forest Products Journal, 55(5), 59–64.

Wang, X., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). A numerical investigation of dopant segregation by modified vertical gradient freezing with moderate magnetic and weak electric fields. International Journal of Engineering Science, 43(12-Nov), 908–924.

Yang, M., & Ma, N. (2005). A computational study of natural convection in a liquid-encapsulated molten semiconductor with a horizontal magnetic field. International Journal of Heat and Fluid Flow, 26(5), 810–816.

Ramasubramanian, M. K., Venditti, R. A., Ammineni, C., & Mallapragada, V. (2005). Optical sensor for noncontact measurement of lignin content in high-speed moving paper surfaces. IEEE SENSORS JOURNAL, 5(5), 1132–1139. https://doi.org/10.1109/JSEN.2005.851007

Kuznetsov, A. V. (2005). Investigation of the onset of thermo-bioconvection in a suspension of oxytactic microorganisms in a shallow fluid layer heated from below. THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 19(4), 287–299. https://doi.org/10.1007/s00162-005-0167-3

Jepson, J. K., & Gopalarathnam, A. (2005). Incorporation of aircraft performance considerations in inverse airfoil design. JOURNAL OF AIRCRAFT, Vol. 42, pp. 199–207. https://doi.org/10.2514/1.5373

Wang, L., & Yuan, F. G. (2005). Damage identification in a composite plate using prestack reverse-time migration technique. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 4(3), 195–211. https://doi.org/10.1177/1475921705055233

Rabiei, A., & AT O'Neill. (2005). A study on processing of a composite metal foam via casting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 404(1-2), 159–164. https://doi.org/10.1016/j.msea.2005.05.089

Lyons, K. M., Watson, K. A., Carter, C. D., & Donbar, J. M. (2005). On flame holes and local extinction in lifted-jet diffusion flames. COMBUSTION AND FLAME, 142(3), 308–313. https://doi.org/10.1016/j.combustflame.2005.04.006

Li, Z., & Kleinstreuer, C. (2005). Fluid-structure interaction effects on sac-blood pressure and wall stress in a stented aneurysm. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 127(4), 662–671. https://doi.org/10.1115/1.1934040

Wan, Q., Roberts, W. L., & Kuznetsov, A. V. (2005). Computational analysis of the feasibility of a micro-pulsejet. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(1-2), 19–26. https://doi.org/10.1016/j.icheatmasstransfer.2004.05.020

Lawrence, B. M., Mirka, G. A., & Buckner, G. D. (2005). Adaptive system identification applied to the biomechanical response of the human trunk during sudden loading. JOURNAL OF BIOMECHANICS, 38(12), 2472–2479. https://doi.org/10.1016/j.jbiomech.2004.09.038

Kuznetsov, A. V., & Geng, P. (2005). The  interaction of bioconvection caused by gyrotactic micro-organisms and settling of small solid particles. International Journal of Numerical Methods for Heat & Fluid Flow, 15(4), 328–347. https://doi.org/10.1108/0961550510590597

Coppa, B. J., Fulton, C. C., Kiesel, S. M., Davis, R. F., Pandarinath, C., Burnette, J. E., … Smith, D. J. (2005). Structural, microstructural, and electrical properties of gold films and Schottky contacts on remote plasma-cleaned, n-type ZnO{0001} surfaces. JOURNAL OF APPLIED PHYSICS, 97(10). https://doi.org/10.1063/1.1898436

Wu, F., & Prajna, S. (2005). SOS-based solution approach to polynomial LPV system analysis and synthesis problems. INTERNATIONAL JOURNAL OF CONTROL, 78(8), 600–611. https://doi.org/10.1080/00207170500114865

McCrain, L. L., & Roberts, W. L. (2005). Measurements of the soot volume field in laminar diffusion flames at elevated pressures. COMBUSTION AND FLAME, 140(1-2), 60–69. https://doi.org/10.1016/j.combustflame.2004.10.005

Wu, T., & Ro, P. I. (2005). Heat transfer performance of a cooling system using vibrating piezoelectric beams. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 15(1), 213–220. https://doi.org/10.1088/0960-1317/15/1/030

Wan, Q., Wu, T., Chastain, J., Roberts, W. L., Kuznetsov, A. V., & Ro, P. I. (2005). Forced convective cooling via acoustic streaming in a narrow channel established by a vibrating piezoelectric bimorph. FLOW TURBULENCE AND COMBUSTION, 74(2), 195–206. https://doi.org/10.1007/s10494-005-4132-4

Zhu, J., & Kuznetsov, A. V. (2005). Forced convection in a composite parallel plate channel: modeling the effect of interface roughness and turbulence utilizing a kappa-epsilon model. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(1-2), 10–18. https://doi.org/10.1016/j.icheatmasstransfer.2004.05.019

Wang, X. H., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Semiconductor crystal growth by modified vertical gradient freezing with electromagnetic stirring. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 19, pp. 95–100. https://doi.org/10.2514/1.10279

Fomin, S., Hashida, T., Chugunov, V., & Kuznestov, A. V. (2005). A borehole temperature during drilling in a fractured rock formation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(2), 385–394. https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.042

Nield, D. A., & Kuznetsov, A. (2005). Thermally developing forced convection in a channel occupied by a porous medium saturated by a non-Newtonian fluid. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 48(6), 1214–1218. https://doi.org/10.1016/j.ijheatmasstransfer.2004.09.040

Chandrasekharan, S., Palaniswamy, H., Jain, N., Ngaile, G., & Altan, T. (2005). Evaluation of stamping lubricants at various temperature levels using the ironing test. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(4-5), 379–388. https://doi.org/10.1016/j.ijmachtools.2004.09.014

Li, Z., & Kleinstreuer, C. (2005). A new wall stress equation for aneurysm-rupture prediction. ANNALS OF BIOMEDICAL ENGINEERING, 33(2), 209–213. https://doi.org/10.1007/s10439-005-8979-2

LaPointe, S. J., Ma, N., & Mueller, D. W. (2005). Growth of binary alloyed semiconductor crystals by the vertical Bridgman-Stockbarger process with a strong magnetic field. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 127(3), 523–528. https://doi.org/10.1115/1.1899169

Nield, D. A., & Kuznetsov, A. V. (2005). A two-velocity two-temperature model for a bi-dispersed porous medium: Forced convection in a channel. TRANSPORT IN POROUS MEDIA, 59(3), 325–339. https://doi.org/10.1007/s11242-004-1685-y

Chitrphiromsri, P., & Kuznetsov, A. (2005). Modeling heat and moisture transport in firefighter protective clothing during flash fire exposure. HEAT AND MASS TRANSFER, 41(3), 206–215. https://doi.org/10.1007/s00231-004-0504-x

Chaos, M., Chen, R. H., Welle, E. J., & Roberts, W. L. (2005). Fuel Lewis number effects in unsteady Burke-Schumann hydrogen flames. COMBUSTION SCIENCE AND TECHNOLOGY, 177(1), 75-+. https://doi.org/10.1080/00102200590883660

Wang, X.-H., Ma, N., Bliss, D. F., & Iseler, G. W. (2005). Semiconductor crystal growth by modified vertical gradient freezing with electromagnetic stirring. AIAA 43rd Aerospace Sciences Meeting and Exhibit, Reno, NV, Jan. 2005, 2005-0916(2005 Jan.).

Nield, D. A., & Kuznetsov, A. V. (2005). Thermal development of forced convection in a channel or duct partly occupied by a porous medium. JOURNAL OF POROUS MEDIA, 8(6), 627–638. https://doi.org/10.1615/JPorMedia.v8.i6.70

Yang, M., Ma, N. B., D. F., & Morton, J. L. (2005). Liquid-encapsulated Czochralski growth of doped gallium-antimonide semiconductor crystals using a strong steady magnetic field. Magnetohydrodynamics, 41(1), 73–86.

Kuznetsov, A. V. (2005). Thermo-bioconvection in a suspension of oxytactic bacteria. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 32(8), 991–999. https://doi.org/10.1016/j.icheatmasstransfer.2004.11.005

Wu, F., & Prajna, S. (2005). SOS-based solution approach to polynomial LPV system analysis and synthesis problems. International Journal of Control, 78(8), 600–611. https://doi.org/10.1080/002071270500114865

Wang, X. H., & Ma, N. (2005). Numerical model for Bridgman-Stockbarger crystal growth with a magnetic field. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 19(3), 406–412. https://doi.org/10.2514/1.13307

Koo, J. M., & Kleinstreuer, C. (2005). Laminar nanofluid flow in microheat-sinks. International Journal of Heat and Mass Transfer, 48(13), 2652–2661. https://doi.org/10.1016/j.ijheattransfer.2005.01.029

Furukawa, T., Ito, M., Izawa, K., & Noori, M. N. (2005). System identification of base-isolated building using seismic response data. Journal of Engineering Mechanics, 131(3), 268–275. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:3(268)

Cheng, L., Kuznetsov, A. V., & Sandeep, K. P. (2005). Mathematical modelling of two-phase non-Newtonian flow in a helical pipe. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 48(6), 649–670. https://doi.org/10.1002/fld.950

Wan, Q., & Kuznetsov, A. V. (2005). Investigation of hysteresis in acoustically driven channel flow at ultrasonic frequency. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 47(2), 137–146. https://doi.org/10.1080/1047780590885873

Wu, F., & Yildizoglu, S. E. (2005). Distributed parameter-dependent modeling and control of flexible structures. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 127(2), 230–239. https://doi.org/10.1115/1.1898240

Zhang, Z., Kleinstreuer, C., Donohue, J. F., & Kim, C. S. (2005). Comparison of micro- and nano-size particle depositions in a human upper airway model. JOURNAL OF AEROSOL SCIENCE, 36(2), 211–233. https://doi.org/10.1016/j.jaerosci.2004.08.006

Li, Z. H., & Kleinstreuer, C. (2005). Blood flow and structure interactions in a stented abdominal aortic aneurysm model. MEDICAL ENGINEERING & PHYSICS, 27(5), 369–382. https://doi.org/10.1016/j.medengphy.2004.12.003

Ramasubramanian, M. K., & Jackson, S. D. (2005). A sensor for measurement of friction coefficient on moving flexible surfaces. IEEE SENSORS JOURNAL, 5(5), 844–849. https://doi.org/10.1109/JSEN.2005.845205