Mechanical and Aerospace Engineering - 2007

Meethong, N., Huang, H.-Y. S., Speakman, S. A., Carter, W. C., & Chiang, Y.-M. (2007). Strain Accommodation during Phase Transformations in Olivine-Based Cathodes as a Materials Selection Criterion for High-Power Rechargeable Batteries. Advanced Functional Materials, 17(7), 1115–1123. https://doi.org/https://doi.org/10.1002/adfm.200600938

Shin, J., Narayanaswamy, V., Raja, L. L., & Clemens, N. T. (2007). Characterization of a direct-current glow discharge plasma actuator in low-pressure supersonic flow. AIAA Journal, 45(7), 1596–1605. https://doi.org/10.2514/1.27197

Shin, J., Narayanaswamy, V., Raja, L. L., & Clemens, N. T. (2007). Characteristics of a plasma actuator in Mach 3 flow. Collection of Technical Papers - 45th AIAA Aerospace Sciences Meeting, 14, 9665–9675. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34250798514&partnerID=MN8TOARS

Dhungel, A., Lu, Y., Phillips, W., Ekkad, S. V., & Heidmann, J. (2007). Film cooling from a row of holes supplemented with anti vortex holes. Proceedings of the ASME Turbo Expo, 4 PART A, 375–384. https://doi.org/10.1115/GT2007-27419

Nasir, H., Ekkad, S. V., & Bunker, R. S. (2007). Effect of tip and pressure side coolant injection on heat transfer distributions for a plane and recessed tip. Journal of Turbomachinery, 129(1), 151–163. https://doi.org/10.1115/1.2366540

Esposito, E. I., Ekkad, S. V., Kim, Y., & Dutta, P. (2007). Comparing extended port and corrugated wall jet impingement geometry for combustor liner backside cooling. Proceedings of the ASME Turbo Expo, 4 PART B, 1347–1354. https://doi.org/10.1115/GT2007-27390

Heidmann, J. D., & Ekkad, S. (2007). A novel anti-vortex turbine film cooling hole concept. Proceedings of the ASME Turbo Expo, 4 PART A, 487–496. https://doi.org/10.1115/GT2007-27528

Lu, Y., & Ekkad, S. V. (2007). Understanding the effect of trenching on film cooling. 2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, 3, 591–596. https://doi.org/10.1115/HT2007-32598

Lu, Y., Allison, D., & Ekkad, S. V. (2007). Turbine blade showerhead film cooling: Influence of hole angle and shaping. International Journal of Heat and Fluid Flow, 28(5), 922–931. https://doi.org/10.1016/j.ijheatfluidflow.2007.01.002

Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2007). Film cooling measurements for cratered cylindrical inclined holes. Proceedings of the ASME Turbo Expo, 4 PART A, 329–338. https://doi.org/10.1115/GT2007-27386

Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2007). Effect of trench width and depth on film cooling from cylindrical holes embedded in trenches. Proceedings of the ASME Turbo Expo, 4 PART A, 339–349. https://doi.org/10.1115/GT2007-27388

Fong, R.-Y., & Cheng, J.-H. (2007). Experimental Verification and Application for Cohesive Element. Abaqus Taiwan Users’ Conference.

Garrett, R., Pearson, J., Peters, K., & Zikry, M. (2007). Optimization of fiber Bragg grating sensor configurations for in-situ failure identification in woven composites throughout impact. Proceedings of SPIE - The International Society for Optical Engineering, 6529 PART 2. https://doi.org/10.1117/12.715216

Pearson, J., Prabhugoud, M., Zikry, M., & Peters, K. (2007). In-situ failure identification in woven composites throughout impact. Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006, 267–276. https://doi.org/10.1115/IMECE2006-15784

Zhao, W., Dusche, G., Zikry, M. A., Chopra, S., Ozturk, M. C., & Rozgonyi, G. (2007). Correlation of local strain in a TEM sample and in the bulk for a recesses SiGe CMOS structure. ECS Transactions, 6(1), 23–30. https://doi.org/10.1149/1.2727384

Zhao, W., Duscher, G., Zikry, M. A., & Rozgonyi, G. (2007). Reliable local strain characterization on Si/SiGe structures in biaxial tension. Materials Research Society Symposium Proceedings, 958, 151–157. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-34347252267&partnerID=MN8TOARS

Pearson, J. D., Zikry, M. A., Peters, K. J., & Prabhugoud, M. (2007). Local and global measurements of dynamic damage evolution in woven composite systems. ICCM International Conferences on Composite Materials. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85076867871&partnerID=MN8TOARS

Ahmadi, G., & Tafreshi, H. V. (2007). Overview of Flow through Textile and Fabrics. Marie Curie Workshop on Flow and Transport in Industrial Porous Media. Presented at the Marie Curie Workshop on Flow and Transport in Industrial Porous Media, The Netherlands.

Pourdeyhimi, B., & Tafreshi, H. V. (2007). Improved Long Lasting Hydroentangling Orifice Jet Strips (Patent No. US7303465 B2).

Dixon, D., Lowder, J. T., Pourdeyhimi, B., & Tafreshi, H. V. (2007). Composite Hydroentangling Nozzle Strip and Method for Producing Nonwoven Fabrics Therewith (Patent No. US7237308B2).

Maze, B., Vahedi Tafreshi, H., Wang, Q., & Pourdeyhimi, B. (2007). Unsteady-state simulation of nanoparticle filtration via electrospun nanofiber webs at reduced operating pressures. American Filtration and Separations Society - 20th Annual Conference and Exposition of the American Filtration and Separations Society 2007, 2, 1014–1018. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883769610&partnerID=MN8TOARS

Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Simulation of nanoparticle filtration via nanofiber media at reduced operating pressures. Fiber Society 2007 Spring Conference - Advanced Polymer Fiber Materials Science and its Applications in Novel Engineered Products. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902668697&partnerID=MN8TOARS

Maze, B., Vahedi Tafreshi, H., Wang, Q., & Pourdeyhimi, B. (2007). Simulation of nanoparticle filtration via nanofiber media at reduced operating pressures. International Nonwovens Technical Conference, INTC 2007: Joint INDA-TAPPI Conference, 665–669. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52649145930&partnerID=MN8TOARS

Wang, Q., Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Pressure drop simulation of multifilament woven fabrics. Fiber Society 2007 Spring Conference - Advanced Polymer Fiber Materials Science and its Applications in Novel Engineered Products. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902683016&partnerID=MN8TOARS

Wang, Q., Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Modeling aerosol filtration via fibrous filter media. Fiber Society 2007 Spring Conference - Advanced Polymer Fiber Materials Science and its Applications in Novel Engineered Products. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902688737&partnerID=MN8TOARS

Jaganathan, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Fluid absorption properties of nonwoven fabric: Analysis of real geometries via Digital Volumetric Imaging. Fiber Society 2007 Spring Conference - Advanced Polymer Fiber Materials Science and its Applications in Novel Engineered Products. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902662663&partnerID=MN8TOARS

Jaganathan, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). On the pressure drop prediction of filter media composed of fibers having a bimodal fiber diameter distribution. International Nonwovens Technical Conference, INTC 2007: Joint INDA-TAPPI Conference, 658–664. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52649126298&partnerID=MN8TOARS

Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Geometrical modeling of fibrous materials under compression. International Nonwovens Technical Conference, INTC 2007: Joint INDA-TAPPI Conference, 579–587. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52649113309&partnerID=MN8TOARS

Jaganathan, S., Vahedi Tafreshi, H., Anantharamaiah, N., & Pourdeyhimi, B. (2007). A note on water management in hydroentangling process. International Nonwovens Technical Conference, INTC 2007: Joint INDA-TAPPI Conference, 545–551. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52649097032&partnerID=MN8TOARS

Wang, Q., Maze, B., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2007). Modeling filtration properties of staple nonwoven media. International Nonwovens Technical Conference, INTC 2007: Joint INDA-TAPPI Conference, 654–657. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-52649164158&partnerID=MN8TOARS

Kota, A. K., Cipriano, B. H., Duesterberg, M. K., Gershon, A. L., Powell, D., Raghavan, S. R., & Bruck, H. A. (2007). Electrical and Rheological Percolation in Polystyrene/MWCNT Nanocomposites. Macromolecules, 40(20), 7400–7406. https://doi.org/10.1021/ma0711792

Wu, F., & Chen, Y. (2007). Robust receding horizon control for constrained linear fractional transformation parameter-dependent systems. IET Control Theory & Applications, 1(5), 1423–1430. https://doi.org/10.1049/iet-cta:20060305

O'Connor, B., An, K. H., Zhao, Y., Pipe, K. P., & Shtein, M. (2007). Fiber Shaped Light Emitting Device. Advanced Materials, 19(22), 3897–3900. https://doi.org/10.1002/adma.200700627

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2007). Smokeless combustion within a small-bore HSDI diesel engine using a narrow angle injector. SAE Technical Papers. https://doi.org/10.4271/2007-01-0203

Fang, T. (2007). Author's reply to the Comment on “Influences of fluid property variation on the boundary layers of a stretching surface.” Acta Mechanica, 189(3-4), 247–248. https://doi.org/10.1007/s00707-006-0390-z

Fang, T., & Lee, C.-F. F. (2007). Combustion in an optical diesel engine fueled with diesel and bio-diesel fuels using multiple injection strategies. Fall Technical Meeting of the Eastern States Section of the Combustion Institute 2007 "Chemical and Physical Processes in Combustion", 145–158. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84946570101&partnerID=MN8TOARS

Zhu, Y., Ke, C., & Espinosa, H. D. (2007). Experimental Techniques for the Mechanical Characterization of One-Dimensional Nanostructures. Experimental Mechanics, 47(1), 7–24. https://doi.org/10.1007/S11340-006-0406-6

Holzbaur, K., Gold, G., & Murray, W. (2007). Changes in Brachioradialis Muscle Volume and Length with spinal cord injury. Journal of Biomechanics, 40, S69. https://doi.org/10.1016/S0021-9290(07)70066-0

Holzbaur, K. R. S., Delp, S. L., Gold, G. E., & Murray, W. M. (2007). Moment-generating capacity of upper limb muscles in healthy adults. Journal of Biomechanics, 40(11), 2442–2449. https://doi.org/10.1016/j.jbiomech.2006.11.013

Vermillion, C., Sun, J., & Butts, K. (2007). Model predictive control allocation for overactuated systems - stability and performance. 2007 46th IEEE Conference on Decision and Control. Presented at the 2007 46th IEEE Conference on Decision and Control. https://doi.org/10.1109/cdc.2007.4434722

Lin, C.-W., & Tu, J. F. (2007). Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds. Journal of Manufacturing Processes, 9(2), 94–108. https://doi.org/10.1016/S1526-6125(07)70111-1

Pandurangan, P., & Buckner, G. D. (2007). Defect identification in GRID-LOCK® joints. NDT & E International, 40(5), 347–356. https://doi.org/10.1016/j.ndteint.2006.12.006

Zhao, Y., An, K. H., Chen, S., O'Connor, B., Pipe, K. P., & Shtein, M. (2007). Localized Current Injection and Submicron Organic Light-Emitting Device on a Pyramidal Atomic Force Microscopy Tip. Nano Letters, 7(12), 3645–3649. https://doi.org/10.1021/nl071883w

Rabiei, A., Neville, B., Reese, N., & Vendra, L. (2007). New Composite Metal Foams under Compressive Cyclic Loadings. Materials Science Forum, 539-543, 1868–1873. https://doi.org/10.4028/www.scientific.net/msf.539-543.1868

Kota, A. K., Cipriano, B. H., Powell, D., Raghavan, S. R., & Bruck, H. A. (2007). Quantitative characterization of the formation of an interpenetrating phase composite in polystyrene from the percolation of multiwalled carbon nanotubes. Nanotechnology, 18(50), 505705. https://doi.org/10.1088/0957-4484/18/50/505705

McCraw, J. L., Moore, N. J., & Lyons, K. M. (2007). Observations on Upstream Flame Propagation in the Ignition of Hydrocarbon Jets. Flow, Turbulence and Combustion, 79(1), 83–97. https://doi.org/10.1007/s10494-007-9071-9

Holzbaur, K. R. S., Murray, W. M., Gold, G. E., & Delp, S. L. (2007). Upper limb muscle volumes in adult subjects. Journal of Biomechanics, 40(4), 742–749. https://doi.org/10.1016/j.jbiomech.2006.11.011

Zhao, Y., Chang, C.-H., Heilmann, R. K., & Schattenburg, M. L. (2007). Phase control in multiexposure spatial frequency multiplication. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 25(6), 2439. https://doi.org/10.1116/1.2794318

Xu, C., & Shin, Y. C. (2007). Interaction analysis for MIMO nonlinear systems based on a fuzzy basis function network model. Fuzzy Sets and Systems, 158(18), 2013–2025. https://doi.org/10.1016/j.fss.2007.02.012

Xu, C., & Shin, Y. C. (2007). Control of cutting force for creep-feed grinding processes using a multi-level fuzzy controller. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 129(4), 480–492. https://doi.org/10.1115/1.2718238

Xu, C., & Shin, Y. C. (2007). A fuzzy inverse model construction method for a general MISO system with a monotonie input-output relationship. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS, 1–6. https://doi.org/10.1109/NAFIPS.2007.383801

Meethong, N., Huang, H.-Y. S., Carter, W. C., & Chiang, Y.-M. (2007). Size-Dependent Lithium Miscibility Gap in Nanoscale Li[sub 1−x]FePO[sub 4]. Electrochemical and Solid-State Letters, 10(5), A134. https://doi.org/10.1149/1.2710960

Huang, H.-Y. S., Liao, J., & Sacks, M. S. (2007). In-Situ Deformation of the Aortic Valve Interstitial Cell Nucleus Under Diastolic Loading. Journal of Biomechanical Engineering, 129(6), 880. https://doi.org/10.1115/1.2801670

Xu, C. (2007). Intelligent Control System for Manufacturing Processes. Presented at the North American Manufacturing Research Conference (NAMRC), Ann Arbor, MI.

Luo, H., Baum, J. D., & Loehner, R. (2007). A Hermite WENO-based limiter for discontinuous Galerkin method on unstructured grids. JOURNAL OF COMPUTATIONAL PHYSICS, 225(1), 686–713. https://doi.org/10.1016/j.jcp.2006.12.017

De Leo, M., Saveliev, A., Kennedy, L. A., & Zelepouga, S. A. (2007). OH and CH luminescence in opposed flow methane oxy-flames. COMBUSTION AND FLAME, 149(4), 435–447. https://doi.org/10.1016/j.combustflame.2007.01.008

Bingue, J. P., Saveliev, A. V., & Kennedy, L. A. (2007). NO reburning in ultrarich filtration combustion of methane. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 31, 3417–3424. https://doi.org/10.1016/j.proci.2006.07.257

Lock, E. H., Merchan-Merchan, W., D'Arcy, J., Saveliev, A. V., & Kennedy, L. A. (2007, September 20). Coating of inner and outer carbon nanotube surfaces with polymers in supercritical CO2. https://doi.org/10.1021/jp075684c

Meethong, N., Huang, H.-Y. S., Speakman, S. A., Carter, W. C., & Chiang, Y.-M. (2007). Strain Accommodation during Phase Transformations in Olivine-Based Cathodes as a Materials Selection Criterion for High-Power Rechargeable Batteries. Advanced Functional Materials, 17(7), 1115–1123. https://doi.org/10.1002/adfm.200600938

Meethong, N., Huang, H.-Y. S., Carter, W. C., & Chiang, Y.-M. (2007). Size-dependent lithium miscibility gap in nanoscale Li(1-x)FePO4. Electrochemical and Solid State Letters, 10(5), A134–138.

Huang, H.-Y. S. (2007). In-situ deformation of the aortic heart valve interstitial cell nucleus under diastolic-loading. Journal of Biomechanical Engineering, 129, 880–889.

Pourdeyhimi, B., Tafreshi, H. V., & Maze, B. (2007). 3-D simulation and analysis of nonwoven structures. Journal of Engineered Fibers and Fabrics, 1(2), 47–52.

Xiang, P., Kuznetsov, A. V., & Seyam, A. M. (2007). Fibers caught in the knuckles of the forming wires: Experimental measurements and physical origins of the force of peeling in the hydroentanglement process. Journal of Engineered Fibers and Fabrics, 2(3), 1–9.

Eischen, J. W., & Monsivais, G. (2007, October). Special issue - Ninth Pan American Congress of Applied Mechanics - Preface. JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, Vol. 2, pp. 1395–1395. https://doi.org/10.2140/jomms.2007.2.1395

Ramasubramanian, M. K., Venditti, R. A., & Katuri, K. C. (2007). Behavior of paper on a high speed conveyor subjected to air jet impingement: A method for estimating bending stiffness. JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, 2(2), 201–219. https://doi.org/10.2140/jomms.2007.2.201

Bolotin, G., Buckner, G. D., Campbell, N. B., Kocherginsky, M., Raman, J., Jeevanandam, V., & Maessen, J. G. (2007). Tissue-disruptive forces during median sternotomy. Heart Surgery Forum, 10(6), E487–492. https://doi.org/10.1532/hsf98.20071121

Baird, D. T., Tolson, R., Bougher, S., & Steers, B. (2007). Zonal wind calculations from Mars Global Surveyor accelerometer and rate data. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 44, pp. 1180–1187. https://doi.org/10.2514/1.28588

Sweet, A. L., & Tuz, J. F. (2007). Tolerance design for the fit between bore and shaft for precision assemblies with significant error- scaling problems. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 45(22), 5223–5241. https://doi.org/10.1080/00207540600871244

Crowley, G., & Tolsont, R. H. (2007). Mars thermospheric winds from Mars Gobal Surveyor and Mars Odyssey aceelerometers. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 44, pp. 1188–1194. https://doi.org/10.2514/1.28625

Tolson, R. H., Keating, G. M., Zurek, R. W., Bougher, S. W., Justus, C. G., & Fritts, D. C. (2007). Application of accelerometer data to atmospheric modeling dunring mars aerobraking operations. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 44, pp. 1172–1179. https://doi.org/10.2514/1.28472

Padgett, D. A., & Mazzoleni, A. P. (2007). Analysis and design for no-spin tethered satellite retrieval. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 30(5), 1516–1519. https://doi.org/10.2514/1.25390

Spencer, D. A., & Tolson, R. (2007). Aerobraking cost and risk decisions. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 44, pp. 1285–1293. https://doi.org/10.2514/1.24303

Kolera-Gokula, H., & Echekki, T. (2007). The mechanism of unsteady downstream interactions of premixed hydrogen-air flames. COMBUSTION SCIENCE AND TECHNOLOGY, 179(11), 2309–2334. https://doi.org/10.1080/00102200701484191

Rezvanian, O., Zikry, M. A., Brown, C., & Krim, J. (2007). Surface roughness, asperity contact and gold RFMEMS switch behavior. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 17(10), 2006–2015. https://doi.org/10.1088/0960-1317/17/10/012

Saadat, S., Buckner, G. D., & Noori, M. N. (2007). Structural system identification and damage detection using the intelligent parameter varying technique: An experimental study. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 6(3), 231–243. https://doi.org/10.1177/1475921707081980

Xiang, P., Kuznetsov, A. V., & Seyam, A.-F. M. (2007). Simulation of fiber entanglement by modeling vorticity in water flow field. TEXTILE RESEARCH JOURNAL, 77(5), 312–329. https://doi.org/10.1177/0040517506069158

Zobel, S., Maze, B., Tafreshi, H. V., Wang, Q., & Pourdeyhimi, B. (2007). Simulating permeability of 3-D calendered fibrous structures. CHEMICAL ENGINEERING SCIENCE, 62(22), 6285–6296. https://doi.org/10.1016/j.ces.2007.07.007

Fang, T. (2007). Flow over a stretchable disk. PHYSICS OF FLUIDS, 19(12). https://doi.org/10.1063/1.2823572

Kleinstreuer, C., Shi, H., & Zhang, Z. (2007). Computational analyses of a pressurized metered dose inhaler and a new drug-aerosol targeting methodology. JOURNAL OF AEROSOL MEDICINE-DEPOSITION CLEARANCE AND EFFECTS IN THE LUNG, 20(3), 294–309. https://doi.org/10.1089/jam.2006.0617

Wang, X., Ma, N., Bliss, D. F., Isler, G. W., & Becla, P. (2007). Combining static and rotating magnetic fields during modified vertical bridgman crystal growth. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 21(4), 736–743. https://doi.org/10.2514/1.28772

McCullen, S. D., Stevens, D. R., Roberts, W. A., Clarke, L. I., Bernacki, S. H., Gorga, R. E., & Loboa, E. G. (2007). Characterization of electrospun nanocomposite scaffolds and biocompatibility with adipose-derived human mesenchymal stem cells. International Journal of Nanomedicine, 2(2), 253–263.

Ramasubramanian, M. K., Venditti, R. A., & Katuri, K. C. (2007). A noncontact sensor for the identification of paper and board samples on a high speed sorting conveyor. Appita Journal, 60(5), 366–371.

Nield, D. A., & Kuznetsov, A. V. (2007). The effects of combined horizontal and vertical heterogeneity and anisotropy on the onset of convection in a porous medium. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 46(12), 1211–1218. https://doi.org/10.1016/j.ijthermalsci.2007.01.005

Shi, H., & Kleinstreuer, C. (2007). Simulation and analysis of high-speed droplet spray dynamics. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 129(5), 621–633. https://doi.org/10.1115/1.2717621

Wu, F., & Chen, Y. (2007). Robust receding horizon control for constrained linear fractional transformation parameter-dependent systems. IET Control Theory and Applications, 1(5), 1423–1430. https://doi.org/10.1049/ict-cta:20060305

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2007). On the pressure drop modeling of monofilament-woven fabrics. CHEMICAL ENGINEERING SCIENCE, 62(17), 4817–4821. https://doi.org/10.1016/j.ces.2007.06.001

Yang, M., Ma, N., Bliss, D. F., & Bryant, G. G. (2007, August). Melt motion during liquid-encapsulated Czochralski crystal growth in steady and rotating magnetic fields. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol. 28, pp. 768–776. https://doi.org/10.1016/j.ijheatfluidflow.2006.08.001

Becker, S. M., & Kunetsov, A. V. (2007). Local temperature rises influence in vivo electroporation pore development: A numerical stratum corneum lipid phase transition model. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 129(5), 712–721. https://doi.org/10.1115/1.2768380

Pearson, J. D., Zikry, M. A., Prabhugoud, M., & Peters, K. (2007). Global-local assessment of low-velocity impact damage in woven composites. JOURNAL OF COMPOSITE MATERIALS, 41(23), 2759–2783. https://doi.org/10.1177/0021998307078734

Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2007). Geometrical modeling of fibrous materials under compression. JOURNAL OF APPLIED PHYSICS, 102(7). https://doi.org/10.1063/1.2794476

Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2007, October). Behaviour of intrinsic polymer optical fibre sensor for large-strain applications. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 18, pp. 3144–3154. https://doi.org/10.1088/0957-0233/18/10/S16

Vendra, L. J., & Rabiei, A. (2007). A study on aluminum-steel composite metal foam processed by casting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 465(1-2), 59–67. https://doi.org/10.1016/j.msea.2007.04.037

Ramasubramanian, M. K., & Wang, Y. (2007). A computational micromechanics constitutive model for the unloading behavior of paper. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 44(22-23), 7615–7632. https://doi.org/10.1016/j.ijsolstr.2007.05.002

Nield, D. A., & Kuznetsov, A. V. (2007). The onset of convection in a porous medium occupying an enclosure of variable width or height. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 129(12), 1714–1718. https://doi.org/10.1115/1.2768097

Rezvanian, O., Zikry, M., & Rajendran, A. M. (2007). Statistically stored, geometrically necessary and grain boundary dislocation densities: microstructural representation and modelling. Philosophical Transactions of the Royal Society of London. Series A, Mathematical, Physical and Engineering Sciences, 463(2087), 2833–2853. https://doi.org/10.1098/rspa.2007.0020

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2007). Simulating through-plane permeability of fibrous materials with different fiber lengths. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 15(8), 855–868. https://doi.org/10.1088/0965-0393/15/8/003

Jernigan, S. R., Buckner, G. D., & Eischen, J. W. (2007). Finite element modeling of the left atrium to facilitate the design of an endoscopic atrial retractor. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 129(6), 825–837. https://doi.org/10.1115/1.2801650

Dixon, M. D., Lowder, J. T., Pourdeyhimi, B., & Tafreshi, H. V. (2007). Composite hydroentangling nozzle strip and method for producing nonwoven fabrics therewith. Washington, DC: U.S. Patent and Trademark Office.

Kleinstreuer, C., Zhang, Z., & Kim, C. S. (2007). Combined inertial and gravitational deposition of microparticles in small model airways of a human respiratory system. JOURNAL OF AEROSOL SCIENCE, 38(10), 1047–1061. https://doi.org/10.1016/j.jaerosci.2007.08.010

Cao, S., & Echekki, T. (2007). Autoignition in nonhomogeneous mixtures: Conditional statistics and implications for modeling. COMBUSTION AND FLAME, 151(1-2), 120–141. https://doi.org/10.1016/j.combustflame.2007.03.008

McCraw, J. L., Moore, N. J., & Lyons, K. M. (2007). Observations on upstream flame propagation in the ignition of hydrocarbon jets. Flow, Turbulence and Combustion, 79(1), 83–97. https://doi.org/10.1007/s10494-006-9071-9

Zhu, J., Kuznetsov, A. V., & Sandeep, K. P. (2007). Numerical modeling of a moving particle in a continuous flow subjected to microwave heating. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 52(5), 417–439. https://doi.org/10.1080/00397910601150031

Paleocrassas, A. G., & Tu, J. F. (2007). Low-speed laser welding of aluminum alloy 7075-T6 using a 300-W,single-mode, ytterbium fiber laser. Welding Journal, 86(6), 179S–186.

Prabhugoud, M., Peters, K., Pearson, J., & Zikry, M. A. (2007). Independent measurement of strain and sensor failure features in Bragg grating sensors through multiple mode coupling. SENSORS AND ACTUATORS A-PHYSICAL, 135(2), 433–442. https://doi.org/10.1016/j.sna.2006.08.021

Wang, L., & Yuan, F. G. (2007). Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments. COMPOSITES SCIENCE AND TECHNOLOGY, 67(7-8), 1370–1384. https://doi.org/10.1016/j.compscitech.2006.09.023

Ngaile, G., Cochran, J., & Stark, D. (2007). Formulation of polymer-based lubricant for metal forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(4), 559–568. https://doi.org/10.1243/09544054JEM659

Pandurangan, P., & Buckner, G. D. (2007). Defect identification in GRID-LOCK (R) joints. NDT & E International, 40(5), 347–356. https://doi.org/10.1016/j.ndtient.2006.12.006

Kuznetsov, A. V. (2007). Analytical solution of equations governing molecular-motor-assisted transport of intracellular particles. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 34(4), 391–398. https://doi.org/10.1016/j.icheatmasstransfer.2007.01.007

Anantharamaiah, N., Roempert, K., Tafreshi, H. V., & Pourdeyhimi, B. (2007). A novel nozzle design for producing hydroentangled nonwoven materials with minimum jet-mark defects. JOURNAL OF MATERIALS SCIENCE, 42(15), 6161–6170. https://doi.org/10.1007/s10853-006-1164-7

Lyons, K. M., Watson, K. A., Carter, C. D., & Donbar, J. M. (2007). Upstream islands of flame in lifted-jet partially premixed combustion. COMBUSTION SCIENCE AND TECHNOLOGY, 179(5), 1029–1037. https://doi.org/10.1080/00102200600910858

Lyons, K. M. (2007). [Review of Toward an understanding of the stabilization mechanisms of lifted turbulent jet flames: Experiments]. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 33(2), 211–231. https://doi.org/10.1016/j.pecs.2006.11.001

Nield, D. A., & Kuznetsov, A. V. (2007). The effect of combined vertical and horizontal heterogeneity on the onset of convection in a bidisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 50(17-18), 3329–3339. https://doi.org/10.1016/j.ijheatmasstransfer.2007.01.027

Sensor systems and networks: Phenomena, technology and applications for NDE and health monitoring 2007. (2007). Bellingham, Wash.: SPIE.

Mantri, P., Mazzoleni, A. P., & Padgett, D. A. (2007). Parametric study of deployment of tethered satellite systems. JOURNAL OF SPACECRAFT AND ROCKETS, 44(2), 412–424. https://doi.org/10.2514/1.22955

Jiang, G., Van Vickle, P., Peters, K., & Knight, V. (2007). Oscillator interrogated time-of-flight optical fiber interferometer for global strain measurements. SENSORS AND ACTUATORS A-PHYSICAL, 135(2), 443–450. https://doi.org/10.1016/j.sna.2006.08.023

Avramenko, A. A., Kuznetsov, A. V., & Nield, D. A. (2007). Instability of slip flow in a channel occupied by a hyperporous medium. Journal of Porous Media, 10(5), 435–442. https://doi.org/10.1615/jpormedia.v10.i5.20

Nield, D. A., & Kuznetsov, A. V. (2007). Forced convection with laminar pulsating flow in a channel or tube. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 46(6), 551–560. https://doi.org/10.1016/j.ijthermalsci.2006.07.011

Gao, X., Shim, W.-B., Goebel, C., Kunze, S., Feussner, I., Meeley, R., … Kolomiets, M. (2007). Disruption of a maize 9-lipoxygenase results in increased resistance to fungal pathogens and reduced levels of contamination with mycotoxin fumonisin. MOLECULAR PLANT-MICROBE INTERACTIONS, 20(8), 922–933. https://doi.org/10.1094/MPMI-20-8-0922

McCullen, S. D., Stano, K. L., Stevens, D. R., Roberts, W. A., Monteiro-Riviere, N. A., Clarke, L. I., & Gorga, R. E. (2007). Development, optimization, and characterization of electrospun poly(lactic acid) nanofibers containing multi-walled carbon nanotubes. JOURNAL OF APPLIED POLYMER SCIENCE, 105(3), 1668–1678. https://doi.org/10.1002/app.26288

Choi, J.-I., Oberoi, R. C., Edwards, J. R., & Rosati, J. A. (2007). An immersed boundary method for complex incompressible flows. JOURNAL OF COMPUTATIONAL PHYSICS, 224(2), 757–784. https://doi.org/10.1016/j.jcp.2006.10.032

Jeong, S.-H., Kim, G.-H., Choi, S.-B., Park, J.-H., & Cha, K.-R. (2007, June). Study on an object transport system using ultrasonic wave excitation. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol. 21, pp. 941–945. https://doi.org/10.1007/BF03027073

Xiao, X., Hassan, H. A., Edwards, J. R., & Gaffney, R. L. (2007). Role of turbulent Prandtl numbers on heat flux at hypersonic Mach numbers. AIAA Journal, 45(4), 806–813. https://doi.org/10.2514/1.2144

Becker, S. M., & Kuznetsov, A. V. (2007). Numerical assessment of thermal response associated with in vivo skin electroporation: The importance of the composite skin model. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 129(3), 330–340. https://doi.org/10.1115/1.2720910

Ramachandrana, S., Narayan, J., & Prater, J. T. (2007). Magnetic properties of Ni-doped MgO diluted magnetic insulators. APPLIED PHYSICS LETTERS, 90(13). https://doi.org/10.1063/1.2717574

Zohni, O., Buckner, G., Kim, T., Kingon, A., Maranchi, J., & Siergiej, R. (2007). Investigating thin film stresses in stacked silicon dioxide/silicon nitride structures and quantifying their effects on frequency response. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 17(5), 1042–1051. https://doi.org/10.1088/0960-1317/17/5/026

Prabhugoud, M., & Peters, K. (2007, August). Finite element analysis of multi-axis strain sensitivities of Bragg gratings in PM fibers. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 18, pp. 861–873. https://doi.org/10.1177/1045389X06074680

Jeong, S. H., Kim, G. H., & Cha, K. R. (2007, June 12). A study on optical device alignment system using ultra precision multi-axis stage. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 187, pp. 65–68. https://doi.org/10.1016/j.jmatprotec.2006.11.165

Ball, B. L., Smith, R. C., Kim, S.-J., & Seelecke, S. (2007). A stress-dependent hysteresis model for ferroelectric materials. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 18(1), 69–88. https://doi.org/10.1177/1045389X07070937

Maze, B., Tafreshi, H. V., Wang, Q., & Pourdeyhimi, B. (2007). A simulation of un-steady-state filtration via nanofiber media at reduced operating pressures. JOURNAL OF AEROSOL SCIENCE, 38(5), 550–571. https://doi.org/10.1016/j.jaerosci.2007.03.008

Nield, D. A., & Kuznetsov, A. V. (2007). The effects of combined horizontal and vertical heterogeneity on the onset of convection in a porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 50(9-10), 1909–1915. https://doi.org/10.1016/j.ijheatmasstransfer.2006.09.023

Li, Z., Kleinstreuer, C., & Zhang, Z. (2007). Simulation of airflow fields and microparticle deposition in realistic human lung airway models. Part II: Particle transport and deposition. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 26(5), 650–668. https://doi.org/10.1016/j.euromechflu.2007.02.004

Li, Z., Kleinstreuer, C., & Zhang, Z. (2007). Simulation of airflow fields and microparticle deposition in realistic human lung airway models. Part I: Airflow patterns. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 26(5), 632–649. https://doi.org/10.1016/j.euromechflu.2007.02.003

Li, Z., Kleinstreuer, C., & Zhang, Z. (2007). Particle deposition in the human tracheobronchial airways due to transient inspiratory flow patterns. JOURNAL OF AEROSOL SCIENCE, 38(6), 625–644. https://doi.org/10.1016/j.jaerosci.2007.03.010

Padgett, D. A., & Mazzoleni, A. P. (2007). Nullcline analysis as an analytical tethered satellite mission design tool. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 30(3), 741–752. https://doi.org/10.2514/1.20946

Xiao, X., Hassan, H. A., & Baurle, R. A. (2007, June). Modeling scramjet flows with variable turbulent Prandtl and Schmidt numbers. AIAA JOURNAL, Vol. 45, pp. 1415–1423. https://doi.org/10.2514/1.26382

Kleinstreuer, C., Li, Z., & Farber, M. A. (2007). [Review of Fluid-structure interaction analyses of stented abdominal aortic aneurysms]. Annual Review of Biomedical Engineering, 9, 169–204. https://doi.org/10.1146/annurev.bioeng.9.060906.151853

Avramenko, A. A., & Kuznetsov, A. V. (2007). Flow instability in a curved porous channel formed by two concentric cylindrical surfaces. TRANSPORT IN POROUS MEDIA, 69(3), 373–381. https://doi.org/10.1007/s11242-006-9078-z

Geng, T., Zheng, F., Kiker, A. P., Kuznetsov, A., & Roberts, W. L. (2007). Experimental and numerical investigation of an 8-cm valveless pulsejet. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 31(7), 641–647. https://doi.org/10.1016/j.expthermflusci.2006.06.005

Anantharamaiah, N., Tafreshi, H. V., & Pourdeyhimi, B. (2007). A simple expression for predicting the inlet roundness of micro-nozzles. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 17(5), N31–N39. https://doi.org/10.1088/0960-1317/17/5/N01

Zhou, L., Yuan, F. G., & Meng, W. J. (2007). A pre-stack migration method for damage identification in composite structures. SMART STRUCTURES AND SYSTEMS, 3(4), 439–454. https://doi.org/10.12989/sss.2007.3.4.439

Li, Z., & Kleinstreuer, C. (2007). A comparison between different asymmetric abdominal aortic aneurysm morphologies employing computational fluid-structure interaction analysis. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 26(5), 615–631. https://doi.org/10.1016/j.euromechflu.2007.03.003

Zhao, W., Duscher, G., Rozgonyi, G., Zikry, M. A., Chopra, S., & Ozturk, M. C. (2007). Quantitative nanoscale local strain profiling in embedded SiGe metal-oxide-semiconductor structures. APPLIED PHYSICS LETTERS, 90(19). https://doi.org/10.1063/1.2738188

Wu, F., Lin, Z., & Zheng, Q. (2007). Output feedback stabilization of linear systems with actuator saturation. IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 52(1), 122–128. https://doi.org/10.1109/TAC.2006.886498

Shi, H., Kleinstreuer, C., & Zhang, Z. (2007). Modeling of inertial particle transport and deposition in human nasal cavities with wall roughness. JOURNAL OF AEROSOL SCIENCE, 38(4), 398–419. https://doi.org/10.1016/j.jaerosci.2007.02.002

Rabiei, A., Blalock, T., Thomas, B., Cuomo, J., Yang, Y., & Ong, J. (2007, April). Microstructure, mechanical properties, and biological response to functionally graded HA coatings. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 27, pp. 529–533. https://doi.org/10.1016/j.msec.2006.05.036

Pearson, J. D., Zikry, M. A., Prabhugoud, M., & Peters, K. (2007). Measurement of low velocity and quasi-static failure modes in PMMA. POLYMER COMPOSITES, 28(3), 381–391. https://doi.org/10.1002/pc.20287

Joung, Y., Choi, S. U., & Choi, J. I. (2007). Direct numerical simulation of turbulent flow in a square duct: Analysis of secondary flows. Journal of Engineering Mechanics, 133(2), 213–221. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:(213)

Pandurangan, P., & Buckner, G. D. (2007). Assessment of damage detection methods in GRID-LOCK (R) structures. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 21(5), 2185–2197. https://doi.org/10.1016/j.ymssp.2006.10.004

Echekki, T., & Kolera-Gokula, H. (2007). A regime diagram for premixed flame kernel-vortex interactions. PHYSICS OF FLUIDS, 19(4). https://doi.org/10.1063/1.2720595

Rabiei, A., Thomas, B., Neville, B., Lee, J. W., & Cuomo, J. (2007, April). A novel technique for processing functionally graded HA coatings. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 27, pp. 523–528. https://doi.org/10.1016/j.msec.2006.05.037

Bolotin, G., Buckner, G. D., Jardine, N. J., Kiefer, A. J., Campbell, N. B., Kocherginsky, M., … Jeevanandam, V. (2007, April). A novel instrumented retractor to monitor tissue-disruptive forces during lateral thoracotomy. JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY, Vol. 133, pp. 949–954. https://doi.org/10.1016/j.jtcvs.2006.09.065

Becker, S. M., & Kuznetsov, A. V. (2007). Thermal damage reduction associated with in vivo skin electroporation: A numerical investigation justifying aggressive pre-cooling. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 50(1-2), 105–116. https://doi.org/10.1016/j.ijheatmasstransfer.2006.06.030

Blondin, J. M., & Shaw, S. (2007). Linear growth of spiral SASI modes in core-collapse supernovae. ASTROPHYSICAL JOURNAL, 656(1), 366–371. https://doi.org/10.1086/510614

Zheng, F., Basciano, C., Li, J., & Kuznetsov, A. V. (2007). Fluid dynamics of cell cytokinesis - Numerical analysis of intracellular flow during cell division. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 34(1), 1–7. https://doi.org/10.1016/j.icheatmasstransfer.2006.09.005

Wang, L., & Yuan, F. G. (2007). Active damage localization technique based on energy propagation of Lamb waves. SMART STRUCTURES AND SYSTEMS, 3(2), 201–217. https://doi.org/10.12989/sss.2007.3.2.201

Azzi, W., Roberts, W. L., & Rabiei, A. (2007). A study on pressure drop and heat transfer in open cell metal foams for jet engine applications. MATERIALS & DESIGN, 28(2), 569–574. https://doi.org/10.1016/j.matdes.2005.08.002

Wu, C., & Zeng, T. (2007). Size-tunable synthesis of metallic nanoparticles in a continuous and steady-flow reactor. CHEMISTRY OF MATERIALS, 19(2), 123–125. https://doi.org/10.1021/cm062344f

Dong, K., & Wu, F. (2007). Robust and gain-scheduling control of LFT systems through duality and conjugate Lyapunov functions. INTERNATIONAL JOURNAL OF CONTROL, 80(4), 555–568. https://doi.org/10.1080/00207170601080213

McCullen, S. D., Stevens, D. R., Roberts, W. A., Ojha, S. S., Clarke, L. I., & Gorga, R. E. (2007). Morphological, electrical, and mechanical characterization of electrospun nanofiber mats containing multiwalled carbon nanotubes. MACROMOLECULES, 40(4), 997–1003. https://doi.org/10.1021/ma061735c

Ma, J. B., Zikry, M. A., Ashamwi, W. M., & Brenner, D. W. (2007). Hierarchical modeling of nanoindentation and microstructural evolution of face-centered cubic gold aggregates. JOURNAL OF MATERIALS RESEARCH, 22(3), 627–643. https://doi.org/10.1557/JMR.2007.0076

Geng, P., & Kuznetsov, A. V. (2007). Dynamics of large solid particles in bioconvective sedimentation. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 53(5), 713–733. https://doi.org/10.1002/fld.1301

Kim, S.-J., & Seelecke, S. (2007). A rate-dependent three-dimensional free energy model for ferroelectric single crystals. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 44(3-4), 1196–1209. https://doi.org/10.1016/j.ijsolstr.2006.06.007

Nield, D. A., & Kuznetsov, A. V. (2007). The onset of convection in a shallow box occupied by a heterogeneous porous medium with constant flux boundaries. TRANSPORT IN POROUS MEDIA, 67(3), 441–451. https://doi.org/10.1007/s11242-006-9035-x

Wang, X., & Ma, N. (2007). Semiconductor crystal growth by the vertical Bridgman process with transverse rotating magnetic fields. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 129(2), 241–243. https://doi.org/10.1115/1.2352790

Zhu, J., Kuznetsov, A. V., & Sandeep, K. P. (2007). Numerical simulation of forced convection in a duct subjected to microwave heating. HEAT AND MASS TRANSFER, 43(3), 255–264. https://doi.org/10.1007/s00231-006-0105-y

Zhu, J., Kuznetsov, A. V., & Sandeep, K. P. (2007). Mathematical modeling of continuous flow microwave heating of liquids (effects of dielectric properties and design parameters). INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 46(4), 328–341. https://doi.org/10.1016/j.ijthermalsci.2006.06.005

Geng, T., Kiker, A., Jr., Ordon, R., Kuznetsov, A. V., Zeng, T. F., & Roberts, W. L. (2007). Combined numerical and experimental investigation of a hobby-scale pulsejet. JOURNAL OF PROPULSION AND POWER, Vol. 23, pp. 186–193. https://doi.org/10.2514/1.18593

Blalock, T., Bai, X., & Rabiei, A. (2007). A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates. SURFACE & COATINGS TECHNOLOGY, 201(12), 5850–5858. https://doi.org/10.1016/j.surfcoat.2006.10.039

Nield, D. A., & Kuznetsov, A. V. (2007, March). Reply to comments on 'Forced convection with slip-flow in a channel or duct occupied by a hyper-porous medium saturated by a rarefied gas'. https://doi.org/10.1007/s11242-006-9070-7

Gariety, M., Ngaile, G., & Altan, T. (2007). Evaluation of new cold forging lubricants without zinc phosphate precoat. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 47(3-4), 673–681. https://doi.org/10.1016/j.ijmachtools.2006.04.016

Ngaile, G., Saiki, H., Ruan, L. Q., & Marumo, Y. (2007). A tribo-testing method for high performance cold forging lubricants. Wear, 262(5-6), 684–692. https://doi.org/10.1016/j.wear.2006.08.009

Geng, T., Schoen, M. A., Kuznetsov, A. V., & Roberts, W. L. (2007). Combined numerical and experimental investigation of a 15-cm valveless pulsejet. FLOW TURBULENCE AND COMBUSTION, 78(1), 17–33. https://doi.org/10.1007/s10494-006-9032-8