Mechanical and Aerospace Engineering - 2008

Case Studies of Air Filtration at Microscales: Micro- and Nanofiber Media. (2008). Journal of Engineered Fibers and Fabrics. Retrieved from https://publons.com/wos-op/publon/65200208/

Narayanaswamy, V., Shin, J., Clemens, N. T., & Raja, L. L. (2008). Investigation of plasma-generated jets for supersonic flow control. 46th AIAA Aerospace Sciences Meeting and Exhibit. https://doi.org/10.2514/6.2008-285

Lu, Y., Dhungel, A., Ekkad, S. V., & Bunker, R. S. (2008). Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches. Journal of Turbomachinery, 131(1). https://doi.org/10.1115/1.2950057

Lu, Y., Ekkad, S. V., & Bunker, R. S. (2008). Trench film cooling - Effect of trench downstream edge and hole spacing. Proceedings of the ASME Turbo Expo, 4(PART A), 563–569. https://doi.org/10.1115/GT2008-50606

Mei, F., Parida, P. R., Jiang, J., Meng, W. J., & Ekkad, S. V. (2008). Fabrication, assembly, and testing of Cu- and Al-based microchannel heat exchangers. Journal of Microelectromechanical Systems, 17(4), 869–881. https://doi.org/10.1109/JMEMS.2008.924276

Heidmann, J. D., & Ekkad, S. (2008). A Novel Antivortex Turbine Film-Cooling Hole Concept. Journal of Turbomachinery, 130(3). https://doi.org/10.1115/1.2777194

Fong, R.-Y., & Chang, J.-H. (2008). Cohesive Analysis and Applications for CADesigner. CADesigner, 117–125.

Garrett, R., Peters, K., & Zikry, M. A. (2008). Sensor networks for in-situ failure identification in woven composites throughout impact. ASME International Mechanical Engineering Congress and Exposition, Proceedings, 10 PART A, 203–210. https://doi.org/10.1115/IMECE2007-42737

Crill, J. W., Irving, D. L., Padgett, C. W., Zikry, M., & Brenner, D. W. (2008). Modeling the effect of varying electrical voltage on the plastic deformation of a single asperity in hot-switched RF MEMS contacts. Materials Research Society Symposium Proceedings, 1137, 185–190. https://doi.org/10.1557/proc-1137-ee10-15

Propst, A., Parker, A., Capps, Z., Peters, K., & Zikry, M. A. (2008). Damage monitoring in woven composites using fiber-Bragg grating sensors on multiple time scales. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008, 2, 185–191. https://doi.org/10.1115/SMASIS2008-527

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2008). Atomic scale simulations of orientation of loading axis on the growth of voids at the onset of ductile failure in single crystal Cu. Materials Research Society Symposium Proceedings, 1137, 162–167. https://doi.org/10.1557/proc-1137-ee08-09-w10-09

Rezvanian, O., Zikry, M. A., Brown, C., & Krim, J. (2008). RF MEMS behavior, surface roughness and asperity contact. Materials Research Society Symposium Proceedings, 1052, 135–140. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-45849129829&partnerID=MN8TOARS

Rezvanian, O., & Zikry, M. A. (2008). Modeling of large strain deformation and failure modes in crystalline aggregates. TMS Annual Meeting, 129–134. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-51649122510&partnerID=MN8TOARS

Shi, J., Zikry, M. A., & Hatem, T. M. (2008). Microstructural modeling of failure in polycrystalline materials. Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 3–8. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-56649102273&partnerID=MN8TOARS

Garret, R., Peters, K., & Zikry, M. (2008). In-situ impact induced damage assessment of woven composite laminates through a FBG sensor network. Proceedings of the 4th European Workshop on Structural Health Monitoring, 825–832. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-62949086365&partnerID=MN8TOARS

Elkhodary, K., Lee, W., Cheeseman, B., Brenner, D. W., & Zikry, M. A. (2008). High strain-rate behavior of high strength aluminum alloys. Materials Research Society Symposium Proceedings, 1137, 143–148. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-70450123718&partnerID=MN8TOARS

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). A New Approach for Modeling Permeability of Fibrous Materials. International Nonwoven Technical Conference (INTC 2008). Presented at the International Nonwoven Technical Conference (INTC 2008), Houston, Texas.

Wang, Q., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Simulating Pressure Drop of Bicomponent Air Filters. International Nonwoven Technical Conference (INTC 2008). Presented at the International Nonwoven Technical Conference (INTC 2008), Houston, Texas.

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). An Image-based Approach for Modeling Permeability of Fibrous Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). A CFD-based Two-Scale modeling approach to predict permeability of fibrous structures. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.

Wang, Q., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Modeling Permeability of Bicomponent Fibrous Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Valley Forge, Pennsylvania.

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). A Realistic Approach for Modeling Permeability of Fibrous Media. TechTextil. Presented at the TechTextil, Atlanta, Georgia.

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Two-Scale Modeling Approach to Predict Permeability of Fibrous Media. Journal of Engineered Fibers and Fabrics, 3(2), 155892500800300. https://doi.org/10.1177/155892500800300208

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). A Case Study of Realistic Two-Scale Modeling of Water Permeability in Fibrous Media. Separation Science and Technology, 43(8), 1901–1916. https://doi.org/10.1080/01496390802063960

Latifi, M., Tafreshi, H. V., & Pourdeyhimi, B. (2008). A Note on an Optical Method to Evaluate Fiber Dispersion in Wet-laid Nonwoven Process. Textile Research Journal, 78(6), 518–523. https://doi.org/10.1177/0040517507081910

Jaganathan, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2008). On the pressure drop prediction of filter media composed of fibers with bimodal diameter distributions. Powder Technology, 181(1), 89–95. https://doi.org/10.1016/j.powtec.2007.07.002

Jaganathan, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2008). A realistic approach for modeling permeability of fibrous media: 3-D imaging coupled with CFD simulation. Chemical Engineering Science, 63(1), 244–252. https://doi.org/10.1016/j.ces.2007.09.020

Ngaile, G., & Bunget, C. (2008). Influence of Ultrasonic Vibration on Microforming. Transaction of the North American Manufacturing Research Institution of SME, 36, 137–144.

Zhang, S., Fei, Y., Chai, B. H. T., Frantz, E., Snyder, D. W., Jiang, X., & Shrout, T. R. (2008). Characterization of piezoelectric single crystal YCa4O(BO3)3 for high temperature applications. Applied Physics Letters, 92(20), 202905. https://doi.org/10.1063/1.2936276

Dong, S., Yan, L., Viehland, D., Jiang, X., & Hackenberger, W. S. (2008). A piezoelectric single crystal traveling wave step motor for low-temperature application. Applied Physics Letters, 92(15), 153504. https://doi.org/10.1063/1.2908963

Shcheglov, K., Jiang, X., Toda, R., Chang, Z., & Yang, E.-H. (2008). Hybrid linear microactuators and their control models for mirror shape correction. Journal of Micro-Nano Mechatronics, 4(4), 159–167. https://doi.org/10.1007/S12213-009-0017-2

Ngaile, G. (2008). Tribological aspects in hydroforming. In M. Koç (Ed.), Hydroforming for Advanced Manufacturing (pp. 144–178). https://doi.org/10.1533/9781845694418.1.144

An, K. H., O’Connor, B., Pipe, K. P., Zhao, Y., & Shtein, M. (2008). Scanning optical probe microscopy with submicrometer resolution using an organic photodetector. Applied Physics Letters, 93(3), 033311. https://doi.org/10.1063/1.2963033

Fang, T., Lin, Y.-C., Foong, T. M., & Lee, C.-F. F. (2008). Spray and combustion visualization in an optical HSDI diesel engine operated in low-temperature combustion mode with bio-diesel and diesel fuels. SAE Technical Papers. https://doi.org/10.4271/2008-01-1390

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2008). Low temperature combustion within an HSDI diesel engine using multiple injection strategies. Proceedings of the 2007 Fall Technical Conference of the ASME Internal Combustion Engine Division, 343–353. https://doi.org/10.1115/ICEF2007-1747

Brehl, D. E., & Dow, T. A. (2008). Review of vibration-assisted machining. Precision Engineering, 32(3), 153–172. https://doi.org/10.1016/j.precisioneng.2007.08.003

Reyhanoglu, M., & Dyer, D. (2008). Control system design and simulation of spacecraft formations. 2008 34th Annual Conference of IEEE Industrial Electronics. Presented at the IECON 2008 - 34th Annual Conference of IEEE Industrial Electronics Society, Orlando, FL. https://doi.org/10.1109/iecon.2008.4757939

Reyhanoglu, M., & Drakunov, S. (2008). Attitude stabilization of small satellites using only magnetic actuation. 2008 34th Annual Conference of IEEE Industrial Electronics. Presented at the IECON 2008 - 34th Annual Conference of IEEE Industrial Electronics Society. https://doi.org/10.1109/iecon.2008.4757936

Reyhanoglu, M. (2008). Slewing maneuver of a flexible spacecraft using finite time control. 2008 34th Annual Conference of IEEE Industrial Electronics. Presented at the IECON 2008 - 34th Annual Conference of IEEE Industrial Electronics Society. https://doi.org/10.1109/iecon.2008.4758378

Yin, J., Cao, Z., Li, C., Sheinman, I., & Chen, X. (2008). Stress-driven buckling patterns in spheroidal core/shell structures. Proceedings of the National Academy of Sciences, 105(49), 19132–19135. https://doi.org/10.1073/pnas.0810443105

Vermillion, C., Sun, J., & Butts, K. (2008). Performance enhancement of modular control systems using µ synthesis. 2008 47th IEEE Conference on Decision and Control. Presented at the 2008 47th IEEE Conference on Decision and Control. https://doi.org/10.1109/cdc.2008.4738997

Lu, Y., Esposito, E., & Ekkad, S. V. (2008). Predictions of Flow and Heat Transfer in Low Emission Combustors. Heat Transfer Engineering, 29(4), 375–384. https://doi.org/10.1080/01457630701825515

Tanter, M., Bercoff, J., Athanasiou, A., Deffieux, T., Gennisson, J.-L., Montaldo, G., … Fink, M. (2008). Quantitative Assessment of Breast Lesion Viscoelasticity: Initial Clinical Results Using Supersonic Shear Imaging. Ultrasound in Medicine & Biology, 34(9), 1373–1386. https://doi.org/10.1016/j.ultrasmedbio.2008.02.002

Muller, M., Mitton, D., Moilanen, P., Bousson, V., Talmant, M., & Laugier, P. (2008). Prediction of bone mechanical properties using QUS and pQCT: Study of the human distal radius. Medical Engineering & Physics, 30(6), 761–767. https://doi.org/10.1016/j.medengphy.2007.08.006

Muller, M., Mitton, D., Talmant, M., Johnson, P., & Laugier, P. (2008). Nonlinear ultrasound can detect accumulated damage in human bone. Journal of Biomechanics, 41(5), 1062–1068. https://doi.org/10.1016/j.jbiomech.2007.12.004

O’Connor, B., Pipe, K. P., & Shtein, M. (2008). Fiber based organic photovoltaic devices. Applied Physics Letters, 92(19), 193306. https://doi.org/10.1063/1.2927533

O’Connor, B., Haughn, C., An, K.-H., Pipe, K. P., & Shtein, M. (2008). Transparent and conductive electrodes based on unpatterned, thin metal films. Applied Physics Letters, 93(22), 223304. https://doi.org/10.1063/1.3028046

Kota, A. K., Kerzner, R., Bigio, D. I., Bruck, H. A., & Powell, D. (2008). Characterization of processing effects in HIPS-CNF composites using thermogravimetric analysis. Polymer Engineering & Science, 48(6), 1120–1125. https://doi.org/10.1002/pen.21059

Kota, A. K., Murphy, L., Strohmer, T., Bigio, D. I., Bruck, H. A., & Powell, D. (2008). Combinatorial development of polymer nanocomposites using transient processing conditions in twin screw extrusion. AIChE Journal, 54(7), 1895–1900. https://doi.org/10.1002/aic.11505

Cipriano, B. H., Kota, A. K., Gershon, A. L., Laskowski, C. J., Kashiwagi, T., Bruck, H. A., & Raghavan, S. R. (2008). Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing. Polymer, 49(22), 4846–4851. https://doi.org/10.1016/j.polymer.2008.08.057

Chang, C.-H., Heilmann, R. K., Schattenburg, M. L., & Glenn, P. (2008). Design of a double-pass shear mode acousto-optic modulator. Review of Scientific Instruments, 79(3), 033104. https://doi.org/10.1063/1.2894210

Chang, C.-H., Zhao, Y., Heilmann, R. K., & Schattenburg, M. L. (2008). Spatial-frequency multiplication with multilevel interference lithography. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 26(6), 2135–2138. https://doi.org/10.1116/1.2976604

Chang, C.-H., Zhao, Y., Heilmann, R. K., & Schattenburg, M. L. (2008). Fabrication of 50 nm period gratings with multilevel interference lithography. Optics Letters, 33(14), 1572. https://doi.org/10.1364/ol.33.001572

Knipe, K., Xu, C., & Jackson, M. J. (2008). Finite element modelling and vibration control of a tetrahedral space frame applied to micromachining. International Journal of Nano and Biomaterials, 1(4), 448–458. https://doi.org/10.1504/IJNBM.2008.022872

Xu, C., & Shin, Y. C. (2008). An adaptive fuzzy controller for constant cutting force in end-milling processes. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 130(3), 0310011–03100110. https://doi.org/10.1115/1.2823070

Xu, C., & Shin, Y. C. (2008). A multi-level fuzzy control design for general nonlinear multi-input single-output systems. Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS. https://doi.org/10.1109/NAFIPS.2008.4531229

Xu, C., & Shin, Y. C. (2008). A fuzzy inverse model construction method for general monotonic multi-input-single-output (MISO) systems. IEEE Transactions on Fuzzy Systems, 16(5), 1216–1231. https://doi.org/10.1109/TFUZZ.2008.924336

Meethong, N., Kao, Y.-H., Tang, M., Huang, H.-Y., Carter, W. C., & Chiang, Y.-M. (2008). Electrochemically Induced Phase Transformation in Nanoscale Olivines Li1−xMPO4(M = Fe, Mn). Chemistry of Materials, 20(19), 6189–6198. https://doi.org/10.1021/cm801722f

Shin, Y. C., & Xu, C. (2008). Intelligent Systems: Modeling, Optimization and Control. In Intelligent Systems: Modeling, Optimization, and Control (pp. 1–433). https://doi.org/10.1201/9781420051773

Xu, C., Knipe, K., & Jackson, M. (2008). Finite Element Modeling and Vibration Control of a Tetraform Space Frame for Micro-Machining Processes. Presented at the 6th International Workshop on Microfactories, Evanston, IL.

R., A., & Xu, C. (2008). Cooperative Navigation and Adaptive Guidance. The Bulletin of Military Operations Research: Phalanx, 41(4), 12–17.

Xu, C., Tang, Y., & Jackson, M. (2008). Adaptive Control of Cutting Force to Compensate Tool Deflection during Micro-Milling Processes. Presented at the 6th International Workshop on Microfactories, Evanston, IL.

Purser, M., Cormier, D., Buckner, G., Cook, R., & Bolotin, G. (2008). Annuloplasty band with shape memory alloy stiffener. Medical Device Materials IV, 231–236.

Merchan-Merchan, W., Saveliev, A. V., & Taylor, A. M. (2008). High rate flame synthesis of highly crystalline iron oxide nanorods. NANOTECHNOLOGY, 19(12). https://doi.org/10.1088/0957-4484/19/12/125605

Som, S., Ramirez, A. I., Hagerdorn, J., Saveliev, A., & Aggarwal, S. K. (2008). A numerical and experimental study of counterflow syngas flames at different pressures. FUEL, 87(3), 319–334. https://doi.org/10.1016/j.fuel.2007.05.023

Tang, M., Huang, H.-Y. S., Meethong, N., Kao, Y.-H., Carter, W. C., & Chiang, Y.-M. (2008). Modeling particle size effects on phase stability and transition pathways in nanosized plivine cathode particles. Materials Research Society Symposium Proceedings, 1100, JJ03–04.

Meethong, N., Kao, Y.-H., Tang, M., Huang, H.-Y. S., Carter, W. C., & Chiang, Y.-M. (2008). Electrochemically induced phase transformation in nanoscale olivines Li(1-x)MPO4 (M=Fe, Mn). Chemistry of Materials, 20, 6189–6198.

Pourdeyhimi, B., Tafreshi, H. V., & Anantharamaiah, N. (2008). System and method for reducing jet streaks in hydroentangled fibers.

Bunget, C. J., & Ngaile, G. (2008). Ultrasonic microforming. Saarbrucken: VDM Verlag Dr. Muller.

Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Case studies of air filtration at microscales: Micro- and nanofiber media. Journal of Engineered Fibers and Fabrics, 3(2).

Zhang, S., & Echekki, T. (2008). Stochastic modeling of finite-rate chemistry effects in hydrogen-air turbulent jet diffusion flames with helium dilution. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 33(23), 7295–7306. https://doi.org/10.1016/j.ijhydene.2008.09.018

Wu, C., Mosher, B. P., & Zeng, T. (2008). Powder-based nanoparticles fabrication technique in solution phase. POWDER TECHNOLOGY, 188(2), 166–169. https://doi.org/10.1016/j.powtec.2008.04.038

Bean, E., Chanoit, G., Jernigan, S., Bolotin, G., Osborne, J., & Buckner, G. (2008). Evaluation of a novel atrial retractor for exposure of the mitral valve in a porcine model. JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY, 136(6), 1492–1495. https://doi.org/10.1016/j.jtcvs.2008.08.030

Fang, T. (2008). Boundary layer flow over a shrinking sheet with power-law velocity. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(25-26), 5838–5843. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.067

Jin, C., Nori, S., Wei, W., Aggarwal, R., Kumar, D., & Narayan, R. J. (2008). Pulsed Laser Deposition of Nanoporous Cobalt Thin Films. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 8(11), 6043–6047. https://doi.org/10.1166/jnn.2008.483

Kuznetsov, A. V., & Hooman, K. (2008). Modeling traffic jams in intracellular transport in axons. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(23-24), 5695–5699. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.022

Kleinstreuer, C., Li, J., & Koo, J. (2008). Microfluidics of nano-drug delivery. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(23-24), 5590–5597. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.043

Xi, D., Zhang, H., Furst, S., Chen, B., & Pei, Q. (2008). Electrochemical Synthesis and Photovoltaic Property of Cadmium Sulfide-Polybithiophene Interdigitated Nanohybrid Thin Films. JOURNAL OF PHYSICAL CHEMISTRY C, 112(49), 19765–19769. https://doi.org/10.1021/jp807868j

Fang, T., & Zhang, J. (2008). An exact analytical solution of the Falkner-Skan equation with mass transfer and wall stretching. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 43(9), 1000–1006. https://doi.org/10.1016/j.ijnonlinmec.2008.05.006

Fang, T. (2008). A note on the unsteady boundary layers over a flat plate. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 43(9), 1007–1011. https://doi.org/10.1016/j.ijnonlinmec.2008.06.010

Kleinstreuer, C., Zhang, Z., Li, Z., Roberts, W. L., & Rojas, C. (2008). A new methodology for targeting drug-aerosols in the human respiratory system. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(23-24), 5578–5589. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.052

Nield, D. A., & Kuznetsov, A. V. (2008). A bioheat transfer model: Forced convection in a channel occupied by a porous medium with counterflow. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(23-24), 5534–5541. https://doi.org/10.1016/j.ijheatmasstransfer.2008.04.015

Fang, T., Lin, Y.-C., Foong, T. M., & Lee, C.-F. (2008). Reducing NOx Emissions from a Biodiesel-Fueled Engine by Use of Low-Temperature Combustion. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42(23), 8865–8870. https://doi.org/10.1021/es8001635

Silverberg, L., & Levedahl, B. (2008). Characterizing Hydrodynamic Loads in Full Unsteady Flow. AIAA JOURNAL, 46(12), 3159–3163. https://doi.org/10.2514/1.36626

Fang, T., Liang, W., & Lee, C.-fon F. (2008). A new solution branch for the Blasius equation-A shrinking sheet problem. COMPUTERS & MATHEMATICS WITH APPLICATIONS, 56(12), 3088–3095. https://doi.org/10.1016/j.camwa.2008.07.027

Marple, B., Song, Y. J., Gollapudi, S., Murty, K. L., & Charit, I. (2008). Stress rupture characteristics of zirconium alloy cladding under closed-end internal pressurization. Proceedings of 16th International Conference on Nuclear Engineering-Volume 1, 385–388. https://doi.org/10.1115/icone16-48006

Ramasubramanian, M. K., Barham, O. M., & Swaminathan, V. (2008). Mechanics of a mosquito bite with applications to microneedle design. Bioinspiration & Biomimetics, 3(4).

Yelverton, T. L. B., & Roberts, W. L. (2008). Soot surface temperature measurements in pure and diluted flames at atmospheric and elevated pressures. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 33(1), 17–22. https://doi.org/10.1016/j.expthermflusci.2008.06.014

Karaguzel, B., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Potentials and challenges in jetting microdroplets onto nonwoven fabrics. JOURNAL OF THE TEXTILE INSTITUTE, 99(6), 581–589. https://doi.org/10.1080/00405000701609282

Kleinstreuer, C., Zhang, Z., & Li, Z. (2008). [Review of Modeling airflow and particle transport/deposition in pulmonary airways]. RESPIRATORY PHYSIOLOGY & NEUROBIOLOGY, 163(1-3), 128–138. https://doi.org/10.1016/j.resp.2008.07.002

Fang, T.-G., Coverdill, R. E., Lee, C.-F. F., & While, R. A. (2008). Low-sooting combustion in a small-bore high-speed direct-injection diesel engine using narrow-angle injectors. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 222(D10), 1927–1937. https://doi.org/10.1243/09544070JAUTO751

Zhang, Z., Kleinstreuer, C., & Kim, C. S. (2008). Airflow and Nanoparticle Deposition in a 16-Generation Tracheobronchial Airway Model. ANNALS OF BIOMEDICAL ENGINEERING, 36(12), 2095–2110. https://doi.org/10.1007/s10439-008-9583-z

Edwards, J. R. (2008, August). Numerical simulations of shock/boundary layer interactions using time-dependent modeling techniques: A survey of recent results. PROGRESS IN AEROSPACE SCIENCES, Vol. 44, pp. 447–465. https://doi.org/10.1016/j.paerosci.2008.06.004

Tolson, R. H., Willcockson, W. H., Desai, P. N., & Thomas, P. (2008). Anomalistic disturbance torques during the entry phase of the Mars exploration rover missions: A telemetry and Mars-surface investigation. Journal of the Astronautical Sciences, 56(1), 99–119.

Liu, L., & Yuan, F. G. (2008). Active damage localization for plate-like structures using wireless sensors and a distributed algorithm. SMART MATERIALS AND STRUCTURES, 17(5). https://doi.org/10.1088/0964-1726/17/5/055022

Jaganathan, S., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2008). Simulating Liquid Flow through Virtual Glass Fiber Mats. TEXTILE RESEARCH JOURNAL, 78(10), 903–910. https://doi.org/10.1177/0040517507085195

Ramasubramanian, M., Anthony, S., & Lambert, J. (2008). Simplified spectra photometric method for the detection of red blood cell agglutination. APPLIED OPTICS, 47(22), 4094–4105. https://doi.org/10.1364/AO.47.004094

Zheng, Q., & Wu, F. (2008). Output feedback control of saturated discrete-time linear systems using parameter-dependent Lyapunov functions. SYSTEMS & CONTROL LETTERS, 57(11), 896–903. https://doi.org/10.1016/j.sysconle.2007.12.011

Tran, C. M., & Silverberg, L. M. (2008). Optimal release conditions for the free throw in men's basketball. JOURNAL OF SPORTS SCIENCES, 26(11), 1147–1155. https://doi.org/10.1080/02640410802004948

Jaganathan, S., Tafreshi, H. V., & Ppurdeyhimi, B. (2008). Modeling liquid porosimetry in modeled and imaged 3-D fibrous microstructures. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 326(1), 166–175. https://doi.org/10.1016/j.jcis.2008.07.011

Fang, T., & Zhang, J. (2008). Flow between two stretchable disks - An exact solution of the Navier-Stokes equations. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 35(8), 892–895. https://doi.org/10.1016/j.icheatmasstransfer.2008.04.018

Fang, T., Coverdill, R. E., Lee, C.-f.F., & White, R. A. (2008). Effects of injection angles on combustion processes using multiple injection strategies in an HSDI diesel engine. Fuel, 87(15-16), 3232–3239. https://doi.org/10.1016/j.fuel.2008.05.012

Narayan, J., Nori, S., Pandya, D. K., Avasthi, D. K., & Smirnov, A. I. (2008). Defect dependent ferromagnetism in MgO doped with Ni and Co. Applied Physics Letters, 93(8).

Kleinstreuer, C., Li, Z., Basciano, C. A., Seelecke, S., & Farber, M. A. (2008). Computational mechanics of Nitinol stent grafts. JOURNAL OF BIOMECHANICS, 41(11), 2370–2378. https://doi.org/10.1016/j.jbiomech.2008.05.032

Ngaille, G., & Yang, C. (2008). Applications of analytical model for characterizing the pear-shaped tribotest for tube hydroforming. Part 2. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 222(7), 865–873. https://doi.org/10.1243/09544054JEM1058

Kuznetsov, A. V. (2008). Analytical solution of the steady-state molecular-motor-assisted transport equations governing distribution of intracellular particles within a cell dendrite. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 35(8), 881–884. https://doi.org/10.1016/j.icheatmasstransfer.2008.04.013

Yang, C., & Ngaile, G. (2008). Analytical model for planar tube hydroforming: Prediction of formed shape, corner fill, wall thinning, and forming pressure. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 50(8), 1263–1279. https://doi.org/10.1016/j.ijmecsci.2008.05.006

Ngaile, G., & Yang, C. (2008). Analytical model for characterizing the pear-shaped tribotest for tube hydroforming. Part 1. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 222(7), 849–863. https://doi.org/10.1243/09544054JEM1057

Rezvanian, O., Zikry, M. A., & Rajendran, A. M. (2008, October 25). Microstructural modeling in f.c.c. crystalline materials in a unified dislocation-density framework. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 494, pp. 80–85. https://doi.org/10.1016/j.msea.2007.10.091

Ramasubramanian, M. K., Shiffler, D. A., & Jayachandran, A. (2008). A Computational fluid dynamics modeling and experimental study of the mixing process for the dispersion of the synthetic fibers in wet-lay forming. Journal of Engineered Fibers and Fabrics, 3(1), 11–19.

Luo, H., Baum, J. D., & Lohner, R. (2008). A discontinuous Galerkin method based on a Taylor basis for the compressible flows on arbitrary grids. JOURNAL OF COMPUTATIONAL PHYSICS, 227(20), 8875–8893. https://doi.org/10.1016/j.jcp.2008.06.035

Kuznetsov, A. V., & Avramenko, A. A. (2008). The method of separation of variables for solving equations describing molecular-motor-assisted transport of intracellular particles in a dendrite or axon. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 464(2099), 2867–2886. https://doi.org/10.1098/rspa.2008.0127

Jaganathan, S., Tafreshi, H. V., & Pourdeyhimi, B. (2008). The influence of forming surface on the vacuum pressure in hydroentangling process. JOURNAL OF THE TEXTILE INSTITUTE, 99(5), 407–414. https://doi.org/10.1080/00405000701692338

Fang, T., Coverdill, R. E., Lee, C.-F. F., & White, R. A. (2008). Low temperature premixed combustion within a small bore high speed direct injection (HSDI) optically accessible diesel engine using a retarded single injection. International Journal of Automotive Technology, 9(5), 551–561. https://doi.org/10.1007/s12239-008-0065-y

McMullen, R. J., Clode, A. B., Pandiri, A. K. R., Malarkey, D. E., Michau, T. M., & Gilger, B. C. (2008). Epibulbar melanoma in a foal. VETERINARY OPHTHALMOLOGY, 11, 44–50. https://doi.org/10.1111/j.1463-5224.2008.00637.x

Kleinstreuer, C., Zhang, Z., & Donohue, J. F. (2008). Targeted drug-aerosol delivery in the human respiratory system. ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, Vol. 10, pp. 195–220. https://doi.org/10.1146/annurev.bioeng.10.061807.160544

Mark, D. B., Anstrom, K. J., Sun, J. L., Clapp-Channing, N. E., Tsiatis, A. A., Davidson-Ray, L., … Bardy, G. H. (2008). Quality of life with defibrillator therapy or amiodarone in heart failure. NEW ENGLAND JOURNAL OF MEDICINE, 359(10), 999–1008. https://doi.org/10.1056/NEJMoa0706719

Koo, J., Kang, Y., & Kleinstreuer, C. (2008). A nonlinear effective thermal conductivity model for carbon nanotube and nanofiber suspensions. NANOTECHNOLOGY, 19(37). https://doi.org/10.1088/0957-4484/19/37/375705

Brehl, D. E., & Dow, T. A. (2008). [Review of Review of vibration-assisted machining]. Precision Engineering, 32(3), 153–172.

Marley, S. K., Danby, S. J., Roberts, W. L., Drake, M. C., & Fansler, T. D. (2008). Quantification of transient stretch effects on kernel-vortex interactions in premixed methane-air flames. COMBUSTION AND FLAME, 154(1-2), 296–309. https://doi.org/10.1016/j.combustflame.2008.02.003

Ranganath, B., & Echekki, T. (2008). One-dimensional turbulence-based closure with extinction and reignition. COMBUSTION AND FLAME, 154(1-2), 23–46. https://doi.org/10.1016/j.combustflame.2008.03.020

Pandurangan, P., Eischen, J., Kenkare, N., & Lamar, T. A. M. (2008). Enhancing accuracy of drape simulation. Part II: Optimized drape simulation using industry-specific software. JOURNAL OF THE TEXTILE INSTITUTE, 99(3), 219–226. https://doi.org/10.1080/00405000701489198

Kenkare, N., Lamar, T. A. M., Pandurangan, P., & Eischen, J. (2008). Enhancing accuracy of drape simulation. Part I: Investigation of drape variability via 3D scanning. JOURNAL OF THE TEXTILE INSTITUTE, 99(3), 211–218. https://doi.org/10.1080/00405000701489222

Zheng, F., Ordon, R. L., Scharton, T. D., Kuznetsov, A. V., & Roberts, W. L. (2008). A new acoustic model for valveless pulsejets and its application to optimization thrust. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 130(4). https://doi.org/10.1115/1.2900730

Yuan, W.-C., Zhou, L., & Yuan, F.-G. (2008). Wave reflection and transmission in composite beams containing semi-infinite delamination. JOURNAL OF SOUND AND VIBRATION, 313(3-5), 676–695. https://doi.org/10.1016/j.jsv.2007.12.012

Wang, L., & Yuan, F. G. (2008). Vibration energy harvesting by magnetostrictive material. SMART MATERIALS AND STRUCTURES, 17(4). https://doi.org/10.1088/0964-1726/17/4/045009

Rees, D. A. S., Nield, D. A., & Kuznetsov, A. V. (2008). Vertical free convective boundary-layer flow in a bidisperse porous medium. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 130(9). https://doi.org/10.1115/1.2943304

Nield, D. A., & Kuznetsov, A. V. (2008). The effects of combined horizontal and vertical heterogeneity on the onset of convection in a porous medium: Moderate heterogeneity. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(9-10), 2361–2367. https://doi.org/10.1016/j.ijheatmasstransfer.2007.08.011

Kuznetsov, A. V., & Nield, D. A. (2008). The effect of a transition layer between a fluid and a porous medium: Forced convection in a channel. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 130(9). https://doi.org/10.1115/1.2945905

Echekki, T. (2008). Stochastic modeling of autoignition in turbulent non-homogeneous hydrogen-air mixtures. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 33(10), 2596–2603. https://doi.org/10.1016/j.ijhydene.2008.03.030

Xiang, P., & Kuznetsov, A. V. (2008). Simulation of shape dynamics of along flexible fiber in a turbulent flow in the hydroentanglement process. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 35(5), 529–534. https://doi.org/10.1016/j.icheatmasstransfer.2008.01.006

Ngaile, G., & Botz, F. (2008). Performance of graphite and boron-nitride-silicone based lubricants and associated lubrication mechanisms in warm forging of aluminum. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 130(2). https://doi.org/10.1115/1.2805432

Hartl, A. E., & Mazzoleni, A. P. (2008). Parametric study of spherical rovers crossing a valley. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 31(3), 775–779. https://doi.org/10.2514/1.33932

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2008). Numerical modeling of molecular-motor-assisted transport of adenoviral vectors in a spherical cell. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 11(3), 215–222. https://doi.org/10.1080/10255840701700957

Gowdy, K., Krantz, Q. T., Daniels, M., Linak, W. P., Jaspers, I., & Gilmour, M. I. (2008). Modulation of pulmonary inflammatory responses and antimicrobial defenses in mice exposed to diesel exhaust. TOXICOLOGY AND APPLIED PHARMACOLOGY, 229(3), 310–319. https://doi.org/10.1016/j.taap.2008.01.040

Panusittikorn, W., & Ro, P. I. (2008). Modeling and control of a magnetostrictive tool servo system. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 130(3). https://doi.org/10.1115/1.2837432

Krevet, B., Kohl, M., Morrison, P., & Seelecke, S. (2008). Magnetization- and strain-dependent free energy model for FEM simulation of magnetic shape memory alloys. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 158, 205–211. https://doi.org/10.1140/epjst/e2008-00677-y

Choi, J.-I., & Edwards, J. R. (2008). Large eddy simulation and zonal modeling of human-induced contaminant transport. INDOOR AIR, 18(3), 233–249. https://doi.org/10.1111/j.1600-0668.2008.00527.x

Shenoy, A. R., & Kleinstreuer, C. (2008). Flow over a thin circular disk at low to moderate Reynolds numbers. JOURNAL OF FLUID MECHANICS, 605, 253–262. https://doi.org/10.1017/S0022112008001626

Fang, T. (2008). Flow and heat transfer characteristics of the boundary layers over a stretching surface with a uniform-shear free stream. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(9-10), 2199–2213. https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.013

Yelverton, T. L. B., & Roberts, W. L. (2008). Effect of dilution, pressure, and velocity on smoke point in laminar jet flames. COMBUSTION SCIENCE AND TECHNOLOGY, 180(7), 1334–1346. https://doi.org/10.1080/00102200801931570

Jung, D., Chung, J., & Mazzoleni, A. (2008). Dynamic stability of a semi-circular pipe conveying harmonically oscillating fluid. JOURNAL OF SOUND AND VIBRATION, 315(1-2), 100–117. https://doi.org/10.1016/j.jsv.2008.01.062

Tolson, R., Bemis, E., Hough, S., Zaleski, K., Keating, G., Shidner, T., … Thomas, P. (2008). Atmospheric modeling using accelerometer data during Mars Reconnaissance Orbiter aerobraking operations. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 45, pp. 511–518. https://doi.org/10.2514/1.34301

Jiang, G., & Peters, K. (2008). A shear-lag model for three-dimensional, unidirectional multilayered structures. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 45(14-15), 4049–4067. https://doi.org/10.1016/j.ijsolstr.2008.02.018

Morrison, P., Seelecke, S., Krevet, B., & Kohl, M. (2008). A free energy model for magneto-mechanically coupled NiMnGa single crystals. EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 158, 213–220. https://doi.org/10.1140/epjst/e2008-00678-x

Heintze, O., & Seelecke, S. (2008). A coupled thermomechanical model for shape memory alloys - From single crystal to polycrystal. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, 481, 389–394.

Harp, W. R., Paleocrassas, A. G., & Tu, J. F. (2008). A Practical method for determining the beam profile near the focal spot. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 37(11-12), 1113–1119. https://doi.org/10.1007/s00170-007-1067-z

Li, J., & Kleinstreuer, C. (2008). Thermal performance of nanofluid flow in microchannels. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 29(4), 1221–1232. https://doi.org/10.1016/j.ijheatfluidflow.2008.01.005

Rezvanian, O., Brown, C., Zikry, M. A., Kingon, A. I., Krim, J., Irving, D. L., & Brenner, D. W. (2008). The role of creep in the time-dependent resistance of Ohmic gold contacts in radio frequency microelectromechanical system devices. Journal of Applied Physics, 104(2), 024513. https://doi.org/10.1063/1.2953072

Lu, B., Choi, H., Buckner, G. D., & Tammi, K. (2008). Linear parameter-varying techniques for control of a magnetic bearing system. CONTROL ENGINEERING PRACTICE, 16(10), 1161–1172. https://doi.org/10.1016/j.conengprac.2008.01.002

Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2008). Large deformation in-fiber polymer optical fiber sensor. IEEE PHOTONICS TECHNOLOGY LETTERS, 20(5-8), 416–418. https://doi.org/10.1109/LPT.2008.916929

Elkhodary, K. I., Salem, H. G., & Zikry, M. A. (2008). Equal channel angular pressing of canned 2124-Al compacts: Processing, experiments, and modeling. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(9), 2184–2192. https://doi.org/10.1007/s11661-008-9541-2

Zohni, O., Buckner, G., Kim, T., Kingon, A., Maranchi, J., & Siergiej, R. (2008). Effects of adhesion layers on the ferroelectric properties of lead zirconium titanate thin films deposited on silicon nitride coated silicon substrates. THIN SOLID FILMS, 516(18), 6052–6057. https://doi.org/10.1016/j.tsf.2007.10.130

Liu, L., & Yuan, F. G. (2008). Wireless sensors with dual-controller architecture for active diagnosis in structural health monitoring. SMART MATERIALS & STRUCTURES, 17(2). https://doi.org/10.1088/0964-1726/17/2/025016

Burnette, J. E., Kiesel, S., Sayers, D. E., & Nemanich, R. J. (2008). Titanium Interlayer Mediated Epitaxy of CoSi2 on Si1-xGex. THIN SOLID FILMS, 516(8), 1809–1817. https://doi.org/10.1016/j.tsf.2007.08.045

Becker, S. M., & Kuznetsov, A. V. (2008). Thermal in vivo skin electroporation pore development and charged macromolecule transdermal delivery: A numerical study of the influence of chemically enhanced lower lipid phase transition temperatures. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(7-8), 2060–2074. https://doi.org/10.1016/j.ijheatmasstransfer.2007.06.010

Lei, M., Due-Hallen, A., & Hallen, H. (2008, March). Reliable adaptive modulation and interference mitigation for mobile radio slow frequency hopping channels. IEEE TRANSACTIONS ON COMMUNICATIONS, Vol. 56, pp. 352–355. https://doi.org/10.1109/TCOMM.2008.040662

Lyons, K. M., Moore, N. J., McCraw, J. L., Watson, K. A., Carter, C. D., & Donbar, J. M. (2008). On flame-edge propagation. FLOW TURBULENCE AND COMBUSTION, 80(3), 405–410. https://doi.org/10.1007/s10494-008-9137-3

Nield, D. A., & Kuznetsov, A. V. (2008). Natural convection about a vertical plate embedded in a bidisperse porous medium. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 51(7-8), 1658–1664. https://doi.org/10.1016/j.ijheatmasstransfer.2007.07.011

Veeramani, A. S., Buckner, G. D., Owen, S. B., Cook, R. C., & Bolotin, G. (2008). Modeling the dynamic behavior of a shape memory alloy actuated catheter. SMART MATERIALS AND STRUCTURES, 17(1). https://doi.org/10.1088/0964-1726/17/01/015037

Edwards, J. R., Choi, J.-I., & Boles, J. A. (2008). Large-eddy/Reynolds-averaged Navier-Stokes simulation of a Mach 5 compression-corner interaction. AIAA JOURNAL, 46(4), 977–991. https://doi.org/10.2514/1.32240

Lin, Y.-C., Lee, C.-F., & Fang, T. (2008). Characterization of particle size distribution from diesel engines fueled with palm-biodiesel blends and paraffinic fuel blends. ATMOSPHERIC ENVIRONMENT, 42(6), 1133–1143. https://doi.org/10.1016/j.atmosenv.2007.10.046

Cao, S., & Echekki, T. (2008). A low-dimensional stochastic closure model for combustion large-eddy simulation. JOURNAL OF TURBULENCE, 9(2), 1–35. https://doi.org/10.1080/14685240701790714

Nield, D. A., Simmons, C. T., Kuznetsov, A. V., & Ward, J. D. (2008). On the evolution of salt lakes: Episodic convection beneath an evaporating salt lake. WATER RESOURCES RESEARCH, 44(2). https://doi.org/10.1029/2007wr006161

Luo, H., Baum, J. D., & Lohner, R. (2008). On the computation of steady-state compressible flows using a discontinuous Galerkin method. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 73(5), 597–623. https://doi.org/10.1002/nme.2081

Kleinstreuer, C., & Li, J. (2008, February). Discussion: "Effects of various parameters on nanotluid thermal conductivity" ( Jang, S.P., and Choi, S.D.S., 2007, ASME J. heat transfer, 129, pp. 617-623). JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 130. https://doi.org/10.1115/1.2812307

Howard, A. K. T., & Smith, E. C. (2008). Prediction of air and ground resonance stability of soft-inplane tiltrotors, using a semispan analytical model. JOURNAL OF THE AMERICAN HELICOPTER SOCIETY, 53(2), 164–178. https://doi.org/10.4050/JAHS.53.164

Shi, Y., & Brenner, D. W. (2008). Jetting and detonation initiation in shock induced collapse of nanometer-scale voids. JOURNAL OF PHYSICAL CHEMISTRY C, 112(16), 6263–6270. https://doi.org/10.1021/jp7119735

Kuznetsov, A. V., & Avramenko, A. A. (2008). Generalized Fourier series solution of equations governing molecular-motor-assisted transport of adenoviral vectors in a spherical cell. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 35(4), 395–403. https://doi.org/10.1016/j.icheatmasstransfer.2007.08.003

Bynum, M. D., Hollis, B. R., Hassan, H. A., & Xiao, X. (2008). Turbulent aeroheating on the mars science laboratory entry vehicle. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 22, pp. 306–309. https://doi.org/10.2514/1.33281

Cassidy, D., & Gould, R. D. (2008). Temperature range and conjugate effects in microencapsulated phase-change suspensions. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 22(2), 240–246. https://doi.org/10.2514/1.33560

Song, G., Chitrphiromsri, P., & Ding, D. (2008). Numerical simulations of heat and moisture transport in thermal protective clothing under flash fire conditions. INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS, Vol. 14, pp. 89–106. https://doi.org/10.1080/10803548.2008.11076752

Lohner, R., Luo, H., Baum, J. D., & Rice, D. (2008). Improvements in speed for explicit, transient compressible flow solvers. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 56(12), 2229–2244. https://doi.org/10.1002/fld.1598

Fang, T. (2008). Energy absorption heating and ignition of energetic solids. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 22(2), 313–315. https://doi.org/10.2514/1.32608

Blalock, T. L., Bai, X., Narayan, R., & Rabiei, A. (2008). Effect of substrate temperature on mechanical properties of calcium phosphate coatings. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 85B(1), 60–67. https://doi.org/10.1002/jbm.b.30917

Wilson, J. L., Mazzoleni, A. P., DeJarnette, F. R., Antol, J., Hajos, G. A., & Strickland, C. V. (2008). Design, analysis, and testing of Mars Tumbleweed rover concepts. JOURNAL OF SPACECRAFT AND ROCKETS, 45(2), 370–382. https://doi.org/10.2514/1.31288

Kuznetsov, A. V., & Avramenko, A. A. (2008). Analytical investigation of transient molecular-motor-assisted transport in elongated cells. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 6(1), 45–51. https://doi.org/10.2478/s11534-008-0009-1

Dong, K., & Wu, F. (2008). Almost output regulation for parameter-dependent linear fractional transformation systems. IET CONTROL THEORY AND APPLICATIONS, 2(3), 200–209. https://doi.org/10.1049/iet-cta:20070087

Zhu, J., Kuznetsov, A. V., & Sandeep, K. P. (2008). Investigation of a particulate flow containing spherical particles subjected to microwave heating. HEAT AND MASS TRANSFER, 44(4), 481–493. https://doi.org/10.1007/s00231-007-0264-5

Wilson, D. A., & Lyons, K. M. (2008). Effects of dilution and co-flow on the stability of lifted non-premixed biogas-like flames. FUEL, 87(3), 405–413. https://doi.org/10.1016/j.fuel.2007.05.012

Davis, B., Turner, T. L., & Seelecke, S. (2008). Measurement and prediction of the thermomechanical response of shape memory alloy hybrid composite beams. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 19(2), 129–143. https://doi.org/10.1177/1045389X06073172

Dennis, R. S., & Tu, J. F. (2008). Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 199(1-3), 245–255. https://doi.org/10.1016/j.jmatprotec.2007.07.050

Xiang, P., Kuznetsov, A. V., & Seyam, A. M. (2008). A porous medium model of the hydroentanglement process. JOURNAL OF POROUS MEDIA, 11(1), 35–49. https://doi.org/10.1615/JPorMedia.v11.i1.30

Peng, H., Jain, M., Li, Q., Peterson, D. E., Zhu, Y., & Jia, Q. (2008). Vertically aligned pearl-like carbon nanotube arrays for fiber spinning. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 130(4), 1130-+. https://doi.org/10.1021/ja077767c

Amar, A. J., Blackwell, B. F., & Edwards, J. R. (2008). One-dimensional ablation using a full Newton's method and finite control volume procedure. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, Vol. 22, pp. 71–82. https://doi.org/10.2514/1.29610

Harp, W. R., Dilwith, J. R., & Tu, J. F. (2008). Laser ablation using a long-pulsed, high-fluence, CW single-mode fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 198(1-3), 22–30. https://doi.org/10.1016/j.jmatprotec.2007.06.062

Katuri, K. C., Asrani, S., & Ramasubramanian, M. K. (2008). Intraocular pressure monitoring sensors. IEEE SENSORS JOURNAL, 8(1-2), 12–19. https://doi.org/10.1109/JSEN.2007.912539

Avramenko, A. A., & Kuznetsov, A. V. (2008). Flow in a curved porous channel with a rectangular cross section. Journal of Porous Media, 11(3), 241–246. https://doi.org/10.1615/jpormedia.v11.i3.20

Shi, H., Kleinstreuer, C., & Zhang, Z. (2008). Dilute suspension flow with nanoparticle deposition in a representative nasal airway model. PHYSICS OF FLUIDS, 20(1). https://doi.org/10.1063/1.2833468

Neville, B. P., & Rabiei, A. (2008). Composite metal foams processed through powder metallurgy. MATERIALS & DESIGN, 29(2), 388–396. https://doi.org/10.1016/j.matdes.2007.01.026

Nield, A. A., & Kuznetsov, A. V. (2008). Effects of combined horizontal and vertical heterogeneity on the onset of transient convection in a porous medium. Journal of Porous Media, 11(4), 377–387. https://doi.org/10.1615/jpormedia.v11.i4.40

Kuznetsov, A. V., & Nield, D. A. (2008). The effects of combined horizontal and vertical heterogeneity on the onset of convection in a porous medium: double diffusive case. TRANSPORT IN POROUS MEDIA, 72(2), 157–170. https://doi.org/10.1007/s11242-007-9141-4

Rabiei, A., Vendra, L., & Kishi, T. (2008). Fracture behavior of particle reinforced metal matrix composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39(2), 294–300. https://doi.org/10.1016/j.compositesa.2007.10.018

Luo, H., Baum, J. D., & Lohner, R. (2008, March). Fast p-multigrid discontinuous Galerkin method for compressible flows at all speeds. AIAA JOURNAL, Vol. 46, pp. 635–652. https://doi.org/10.2514/1.28314

Cengel, Y. A., & Boles, M. A. (2008). Thermodynamics: an engineering approach. (6th ed.). Boston: McGraw-Hill Higher Education.