Mechanical & Aerospace Engineering - 2010

Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling Particle Loading in Fibrous Filter Media. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas.

Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling Particle Filtration in 3-D Electrospun Nanofibrous Filters. American Filtration and Separation Society. Presented at the American Filtration and Separation Society, San Antonio, Texas.

Tahir, M. A., Tafreshi, H. V., & Pourdeyhimi, B. (2010, November 10). Modeling Radiative Heat Transfer in Fibrous Insulation Media. Presented at the NETInc, Innovative Nonwovens Conference, Raleigh, North Carolina.

Hosseini, S. A., & Tafreshi, H. V. (2010, August 30). Modeling Filtration Efficiency of Electrospun Nanofibrous Filters. Presented at the Nanofibers for the 3rd Millennium, Raleigh, North Carolina.

Tahir, M. A., Tafreshi, H. V., Hosseini, S. A., & Pourdeyhimi, B. (2010). Modeling the role of microstructural parameters in radiative heat transfer through disordered fibrous media. International Journal of Heat and Mass Transfer, 53(21-22), 4629–4637. https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.030

Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling particle filtration in disordered 2-D domains: A comparison with cell models. Separation and Purification Technology, 74(2), 160–169. https://doi.org/10.1016/j.seppur.2010.06.001

Hosseini, S. A., & Tafreshi, H. V. (2010). 3-D simulation of particle filtration in electrospun nanofibrous filters. Powder Technology, 201(2), 153–160. https://doi.org/10.1016/j.powtec.2010.03.020

Ashari, A., Bucher, T. M., Tafreshi, H. V., Tahir, M. A., & Rahman, M. S. A. (2010). Modeling fluid spread in thin fibrous sheets: Effects of fiber orientation. International Journal of Heat and Mass Transfer, 53(9-10), 1750–1758. https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.015

Hosseini, S. A., & Tafreshi, H. V. (2010). Modeling permeability of 3-D nanofiber media in slip flow regime. Chemical Engineering Science, 65(6), 2249–2254. https://doi.org/10.1016/j.ces.2009.12.002

Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Influence of fiber orientation distribution on performance of aerosol filtration media. Chemical Engineering Science, 65(18), 5285–5293. https://doi.org/10.1016/j.ces.2010.06.032

Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Effect of fiber orientation distribution on filter performance. American Filtration and Separations Society Annual National Conference and Exposition 2010, 2. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883817446&partnerID=MN8TOARS

Fotovati, S., Vahedi Tafreshi, H., & Pourdeyhimi, B. (2010). Capture efficiency and pressure drop of bimodal filter media. American Filtration and Separations Society Annual National Conference and Exposition 2010, 2, 710–718. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84883771850&partnerID=MN8TOARS

Ashari, A., Bucher, T. M., & Vahedi Tafreshi, H. (2010). A semi-analytical model for simulating fluid transport in multi-layered fibrous sheets made up of solid and porous fibers. Computational Materials Science, 50(2), 378–390. https://doi.org/10.1016/j.commatsci.2010.08.030

Fotovati, S., Vahedi Tafreshi, H., Ashari, A., Hosseini, S. A., & Pourdeyhimi, B. (2010). Analytical expressions for predicting capture efficiency of bimodal fibrous filters. Journal of Aerosol Science, 41(3), 295–305. https://doi.org/10.1016/j.jaerosci.2010.01.002

Zhang, S., Jiang, X., Lapsley, M., Moses, P., & Shrout, T. R. (2010). Piezoelectric accelerometers for ultrahigh temperature application. Applied Physics Letters, 96(1), 013506. https://doi.org/10.1063/1.3290251

Zhu, J., Wei, S., Ryu, J., Budhathoki, M., Liang, G., & Guo, Z. (2010). In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites. Journal of Materials Chemistry, 20(23), 4937–4948. https://doi.org/10.1039/c0jm00063a

Kang, J. S., Kim, H. S., Ryu, J., Hahn, H. T., Jang, S., & Joung, J. W. (2010). Inkjet printed electronics using copper nanoparticle ink. Journal of Materials Science: Materials in Electronics, 21(11), 1213–1220. https://doi.org/10.1007/s10854-009-0049-3

Telly, S., Perkins, E., Shrestha, D., & Balachandran, B. (2010). Noise Enhanced Performance of Coupled Oscillators: Entropy Studies. Presented at the 13th Conference on Nonlinear Vibrations, Dynamics, and Multi-body Systems, Blacksburg, VA.

Liu, J., Li, J., Grummel, B., Xu, C., & Shen, J. (2010). A Contactless Polymer Derived Ceramic Temperature Sensing System for Turbine Applications. Presented at the Annual Technical Symposium, Florida Center for Advanced AeroPropulsion.

Ali, A., Luo, H., Syed, K. S., & Ishaq, M. (2010). A Parallel Discontinuous Galerkin Code for Compressible Fluid Flows on Unstructured Grids. Journal of Engineering and Applied Sciences, 29(1), 57–75.

Vermillion, C. (2010). Automated Sensitivity-Based Optimization for Control and Identification. 2010 Workshop on Identification for Automotive Systems. Linz, Austria.

Lynch, K., Bloch, A., Drakunov, S., Reyhanoglu, M., & Zenkov, D. (2010). Control of Nonholonomic and Underactuated Systems. In The Control Systems Handbook, Second Edition (pp. 42–41-42–36). https://doi.org/10.1201/b10384-49

Kim, H.-S., Huh, J., & Ryu, J. (2010). Investigation of moisture-induced delamination failure in a semiconductor package via multi-scale mechanics. Journal of Physics D: Applied Physics, 44(3), 034007. https://doi.org/10.1088/0022-3727/44/3/034007

Fang, T., & Zhang, J. (2010). Thermal boundary layers over a shrinking sheet: An analytical solution. Acta Mechanica, 209(3-4), 325–343. https://doi.org/10.1007/s00707-009-0183-2

Zhong, Y., Wert, K. L., & Fang, T. (2010). Waste heat powered adsorption system to provide air conditioning for heavy-duty vehicles. ASHRAE Transactions, 116(PART 2), 300–309. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-79952635208&partnerID=MN8TOARS

Pantokratoras, A., & Fang, T. (2010). Flow of a weakly conducting fluid in a channel filled with a porous medium. Transport in Porous Media, 83(3), 667–676. https://doi.org/10.1007/s11242-009-9470-6

Fang, T., Lee, C.-F., Coverdill, R., & White, R. (2010). Effects of injection pressure on low-sooting combustion in an optical hsdi diesel engine using a narrow angle injector. SAE Technical Papers. https://doi.org/10.4271/2010-01-0339

Hu, J., Xu, F., Huang, A. Q., & Yuan, F. G. (2010). Optimal design of a vibration-based energy harvester using magnetostrictive material (MsM). Smart Materials and Structures, 20(1), 015021. https://doi.org/10.1088/0964-1726/20/1/015021

Kuznetsov, A. V., & Nield, D. A. (2010). Corrigendum to ‘Forced Convection with Slip-Flow in a Channel Occupied by a Hyperporous Medium Saturated by a Rarefied Gas’, Transport in Porous Media, 64, 161–170, 2006, and ‘Thermally Developing Forced Convection in a Porous Medium Occupied by a Rarefied Gas: Parallel Plate Channel or Circular Tube with Walls at Constant Heat Flux’, Transport in Porous Media, 76, 345–362, 2009. Transport in Porous Media, 85(2), 657–658. https://doi.org/10.1007/s11242-010-9654-0

Yin, J., Gerling, G. J., & Chen, X. (2010). Mechanical modeling of a wrinkled fingertip immersed in water. Acta Biomaterialia, 6(4), 1487–1496. https://doi.org/10.1016/j.actbio.2009.10.025

Chen, X., & Yin, J. (2010). Buckling patterns of thin films on curved compliant substrates with applications to morphogenesis and three-dimensional micro-fabrication. Soft Matter, 6(22), 5667. https://doi.org/10.1039/c0sm00401d

Zhu, J., Wei, S., Zhang, L., Mao, Y., Ryu, J., Mavinakuli, P., … Guo, Z. (2010). Conductive Polypyrrole/Tungsten Oxide Metacomposites with Negative Permittivity. The Journal of Physical Chemistry C, 114(39), 16335–16342. https://doi.org/10.1021/jp1062463

Zhu, J., Wei, S., Ryu, J., Sun, L., Luo, Z., & Guo, Z. (2010). Magnetic Epoxy Resin Nanocomposites Reinforced with Core−Shell Structured Fe@FeO Nanoparticles: Fabrication and Property Analysis. ACS Applied Materials & Interfaces, 2(7), 2100–2107. https://doi.org/10.1021/am100361h

Ryu, J., Kim, H., Lee, S., Hahn, H. T., & Lashmore, D. (2010). Carbon Nanotube Mat as Mediator-Less Glucose Sensor Electrode. Journal of Nanoscience and Nanotechnology, 10(2), 941–947. https://doi.org/10.1166/jnn.2010.1892

Ryu, J., Kim, K., Kim, H.-S., Hahn, H. T., & Lashmore, D. (2010). Intense pulsed light induced platinum–gold alloy formation on carbon nanotubes for non-enzymatic glucose detection. Biosensors and Bioelectronics, 26(2), 602–607. https://doi.org/10.1016/j.bios.2010.07.021

Ryu, J., Kim, H.-S., Hahn, H. T., & Lashmore, D. (2010). Carbon nanotubes with platinum nano-islands as glucose biofuel cell electrodes. Biosensors and Bioelectronics, 25(7), 1603–1608. https://doi.org/10.1016/j.bios.2009.11.019

Luo, H., Luo, L., & Xu, K. (2010). A BGK-Based Discontinuous Galerkin Method for the Navier-Stokes Equations on Arbitrary Grids. In Computational Fluid Dynamics Review 2010 (pp. 103–122). https://doi.org/10.1142/9789814313377_0006

Boris, R., Vermillion, C., & Butts, K. (2010). A comparative analysis of electronic pedal algorithms using a driver-in-the-loop simulator and system identification of driver behavior. Proceedings of the 2010 American Control Conference. Presented at the 2010 American Control Conference (ACC 2010). https://doi.org/10.1109/acc.2010.5531117

Vermillion, C., Butts, K., & Reidy, K. (2010). Model predictive engine torque control with real-time driver-in-the-loop simulation results. Proceedings of the 2010 American Control Conference. Presented at the 2010 American Control Conference (ACC 2010). https://doi.org/10.1109/acc.2010.5531241

Parida, P. R., Mei, F., Jiang, J., Meng, W. J., & Ekkad, S. V. (2010). Experimental Investigation of Cooling Performance of Metal-Based Microchannels. Heat Transfer Engineering, 31(6), 485–494. https://doi.org/10.1080/01457630903409654

Revankar, S. T., & Ekkad, S. V. (2010). Selected Papers From the 19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference. Heat Transfer Engineering, 31(6), 431–432. https://doi.org/10.1080/01457630903408268

Maresca, D., Emmer, M., van Neer, P. L. M. J., Vos, H. J., Versluis, M., Muller, M., … van der Steen, A. F. W. (2010). Acoustic Sizing of an Ultrasound Contrast Agent. Ultrasound in Medicine & Biology, 36(10), 1713–1721. https://doi.org/10.1016/j.ultrasmedbio.2010.06.014

O’Connor, B., Nothern, D., Pipe, K. P., & Shtein, M. (2010). High-efficiency broadband solar cell architectures based on arrays of volumetrically distributed narrowband photovoltaic fibers. Optics Express, 18(S3), A432. https://doi.org/10.1364/oe.18.00a432

O’Connor, B., Chan, E. P., Chan, C., Conrad, B. R., Richter, L. J., Kline, R. J., … DeLongchamp, D. M. (2010). Correlations between Mechanical and Electrical Properties of Polythiophenes. ACS Nano, 4(12), 7538–7544. https://doi.org/10.1021/nn1018768

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Atomic scale studies of spall behavior in nanocrystalline Cu. Journal of Applied Physics, 108(11), 113518. https://doi.org/10.1063/1.3517827

Voronov, D. L., Cambie, R., Ahn, M., Anderson, E. H., Chang, C. H., Gullikson, E. M., … Wilkins, S. (2010). Ultra-high Resolution Optics for EUV and Soft X-ray Inelastic Scattering. Presented at the SRI 2009, 10TH INTERNATIONAL CONFERENCE ON RADIATION INSTRUMENTATION. https://doi.org/10.1063/1.3463360

Voronov, D. L., Ahn, M., Anderson, E. H., Cambie, R., Chang, C.-H., Gullikson, E. M., … Padmore, H. A. (2010). High-efficiency 5000 lines/mm multilayer-coated blazed grating for extreme ultraviolet wavelengths. Optics Letters, 35(15), 2615. https://doi.org/10.1364/ol.35.002615

Chang, C.-H., Waller, L., & Barbastathis, G. (2010). Design and optimization of broadband wide-angle antireflection structures for binary diffractive optics. Optics Letters, 35(7), 907. https://doi.org/10.1364/ol.35.000907

Chang, C.-H., In, H. J., Takahashi, S., Deterre, M., Choi, H. J., Gotrik, K. W., & Barbastathis, G. (2010). Assembling nanoparticle catalysts with nanospheres for periodic carbon nanotube structure growth. Nanotechnology, 22(3), 035301. https://doi.org/10.1088/0957-4484/22/3/035301

Liu, J. (2010). Ultrafast thermoreflectance techniques for measuring thermal conductivity and interface thermal conductance of thin films. Journal of Applied Physics. https://doi.org/10.1063/1.3504213

Liu, J. (2010). Tuning the thermal conductivity of polymers with mechanical strains. Physical Review B. https://doi.org/10.1103/physrevb.81.174122

Liu, J. (2010). Heat transfer enhancement by filling metal porous medium in central area of tubes. Journal of the Energy Institute. https://doi.org/10.1179/014426010x12592427711911

Echekki, T., & Park, J. (2010). The LES-ODT model for turbulent premixed flames. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649864613&partnerID=MN8TOARS

Sarkar, S., Zou, J., Xu, C., An, L., & Zhai, L. (2010). SiCN ceramic fibers with aligned carbon nanotubes. International SAMPE Symposium and Exhibition (Proceedings). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-78649483096&partnerID=MN8TOARS

Allen, R., Lin, K.-C., & Xu, C. (2010). Robust estimation of a maneuvering target from multiple unmanned air vehicles' measurements. 2010 International Symposium on Collaborative Technologies and Systems, CTS 2010, 537–545. https://doi.org/10.1109/CTS.2010.5478465

Sarkar, S., Zou, J., Liu, J., Xu, C., An, L., & Zhai, L. (2010). Polymer-derived ceramic composite fibers with aligned pristine multiwalled carbon nanotubes. ACS Applied Materials and Interfaces, 2(4), 1150–1156. https://doi.org/10.1021/am1000085

Idahosa, U., Saha, A., Xu, C., & Basu, S. (2010). Non-premixed acoustically perturbed swirling flame dynamics. Combustion and Flame, 157(9), 1800–1814. https://doi.org/10.1016/j.combustflame.2010.05.008

Liu, J., Xu, C., & An, L. (2010). Micro-machinable polymer-derived ceramic sensors for high-temperature applications. In M. Tomizuka (Ed.), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010 (Vol. 7647). https://doi.org/10.1117/12.848529

Jiang, T., Hill, A., Fei, W., Wei, Y., Tellam, M., Xu, C., & An, L. (2010). Making bulk ceramics from polymeric precursors. Journal of the American Ceramic Society, 93(10), 3017–3019. https://doi.org/10.1111/j.1551-2916.2010.04069.x

Li, J., Liu, J., & Xu, C. (2010). Machinability study of SiC nano-particles reinforced Magnesium nanocomposites during micro-milling processes. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 2, 391–398. https://doi.org/10.1115/MSEC2010-34294

Yang, W., Gao, F., Xu, C., Wei, G., & An, L. (2010). Fabrication of Si3N4/SiC nanocomposites toughened by in-situ formed low-dimensional nanostructures. Solid State Sciences, 12(9), 1692–1695. https://doi.org/10.1016/j.solidstatesciences.2010.07.013

Yang, M., Xu, C., Wu, C., Lin, K.-C., Chao, Y. J., & An, L. (2010). Fabrication of AA6061/Al<inf>2</inf>O<inf>3</inf>nano ceramic particle reinforced composite coating by using friction stir processing. Journal of Materials Science, 45(16), 4431–4438. https://doi.org/10.1007/s10853-010-4525-1

Joslin, A., Hernandez, M., Deane, E., Collins, S., Xu, C., & Wilson, D. F. (2010). Experimental setup for multi-sensor fusion and data correlation analysis during CNC steel turning process. ASME 2010 International Manufacturing Science and Engineering Conference, MSEC 2010, 1, 461–467. https://doi.org/10.1115/MSEC2010-34308

Idahosa, U., Saha, A., Khatami, N., Xu, C., & Basu, S. (2010). Acoustic perturbation effects on the fluid dynamics and swirling flame response in a non-premixed co-flow burner. Proceedings of the ASME Turbo Expo, 2(PARTS A AND B), 1309–1321. https://doi.org/10.1115/GT2010-23735

Tang, Y., & Xu, C. (2010). Online Tool Deflection Compensation in End Milling of Curved Workpiece. International Journal of Electronics, Computing and Engineering Education, 1(1), 23–28.

Joslin, A., Hernandez, M., Collins, S., Giesecke, D., Ji, Y., & Xu, C. (2010). Experimental Setup for Multi-sensor Fusion and Data Correlation Analysis during CNC Steel Turning Process. Presented at the ASME International Manufacturing Science and Engineering Conference, Erie, PA.

Shao, G., Xu, C., & An, L. (2010). Carbon Nanofiber Reinforced Polymer Derived Ceramic Nanocomposites. Presented at the Materials Science & Technology (MS&T'10), Houston, TX.

Howard, A. K. T. (2010). Enhancing student engagement in engineering statics with online tools. ASME 2010 International Mechanical Engineering Congress & Exposition. https://doi.org/10.1115/imece2010-38363

Ferguson, S., Tilstra, A. H., Seepersad, C. C., & Wood, K. L. (2010). Development of a changeable airfoil optimization model for use in the multidisciplinary design of unmanned aerial vehicles. Proceedings of the ASME international design engineering technical conferences and computers and information in engineering conference, vol 5, pts a and b - 35th design automation conference, 57–68. https://doi.org/10.1115/detc2009-87482

Elkhodary, K., Lee, W., Cheeseman, B., Sun, L. P., Brenner, D. W., & Zikry, M. A. (2010). Deformation of precipitate platelets in high strength aluminum alloys under high strain-rate compression. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, vol 2: Materials Characterization, Computation and Modeling and Energy, 47–52.

York, A., & Seelecke, S. (2010). Towards self-sensing of deap actuators: Capacitive sensing experimental analysis. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 307–314. https://doi.org/10.1115/smasis2010-3847

Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Practical implementation of resistance feedback measurement for position control of a flexible smart inhaler nozzle. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 205–213. https://doi.org/10.1115/smasis2010-3840

Hodgins, M., York, A., & Seelecke, S. (2010). Electro-mechanical analysis of a deap actuator coupled to a negative-rate bias spring mechanism. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol. 1, 315–322. https://doi.org/10.1115/smasis2010-3849

Hangekar, R., Furst, S., & Seelecke, S. (2010). Development of a 6-channel power controller for simultaneous actuation and resistance measurement of SMA wires. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 461–470. https://doi.org/10.1115/smasis2010-3846

Hackney, D., Webb, S., & Peters, K. (2010). Analysis of fiber Bragg grating spectral features for in-situ assessment of sandwich composites. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 2010, vol 2, 813–820. https://doi.org/10.1115/smasis2010-3886

Echekki, T. (Ed.). (2010). Turbulent combustion modeling: Advances, new trends and perspectives. Berlin: Springer Verlag.

Kuznetsov, A. V. (2010). The onset of nanofluid bioconvection in a suspension containing both nanoparticles and gyrotactic microorganisms. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(10), 1421–1425. https://doi.org/10.1016/j.icheatmasstransfer.2010.08.015

Kuznetsov, A. V., & Nield, D. A. (2010). The Onset of Double-Diffusive Nanofluid Convection in a Layer of a Saturated Porous Medium. TRANSPORT IN POROUS MEDIA, 85(3), 941–951. https://doi.org/10.1007/s11242-010-9600-1

Nield, D. A., & Kuznetsov, A. V. (2010). The Onset of Convection in a Heterogeneous Porous Medium with Transient Temperature Profile. TRANSPORT IN POROUS MEDIA, 85(3), 691–702. https://doi.org/10.1007/s11242-010-9586-8

Hatem, T. M., & Zikry, M. A. (2010). Deformation and failure of single-packets in martensitic steels. Computers Materials & Continua, 17(2), 127–147.

Brown, J. A., Vendra, L. J., & Rabiei, A. (2010). Bending Properties of Al-Steel and Steel-Steel Composite Metal Foams. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(11), 2784–2793. https://doi.org/10.1007/s11661-010-0343-y

Edwards, D. J., & Silverberg, L. M. (2010). Autonomous Soaring: The Montague Cross-Country Challenge. JOURNAL OF AIRCRAFT, 47(5), 1763–1769. https://doi.org/10.2514/1.c000287

Zhao, H., Bradford, P. D., Wang, X., Liu, W., Luo, T. J. M., Jia, Q., … Yuan, F.-G. (2010). An intermetallic Fe-Zr catalyst used for growing long carbon nanotube arrays. MATERIALS LETTERS, 64(18), 1947–1950. https://doi.org/10.1016/j.matlet.2010.05.045

Rabiei, A. (2010, November). Recent developments and the future of bone mimicking: materials for use in biomedical implants. EXPERT REVIEW OF MEDICAL DEVICES, Vol. 7, pp. 727–729. https://doi.org/10.1586/erd.10.51

Lien, J. P., York, A., Fang, T., & Buckner, G. D. (2010). Modeling piezoelectric actuators with Hysteretic Recurrent Neural Networks. SENSORS AND ACTUATORS A-PHYSICAL, 163(2), 516–525. https://doi.org/10.1016/j.sna.2010.08.013

Merchan-Merchan, W., Saveliev, A. V., Jimenez, W. C., & Salkar, G. (2010). Flame synthesis of hybrid nanowires with carbon shells and tungsten-oxide cores. CARBON, 48(15), 4510–4518. https://doi.org/10.1016/j.carbon.2010.08.028

Pawar, S., & Peters, K. (2010). Transient infrared thermography for damage evaluation in aerospace composites. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2010, Vol. 7649. https://doi.org/10.1117/12.847789

Park, C., Peters, K., & Zikry, M. (2010). The Role of Embedded Sensors in Damage Assessment of Composite Laminates. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847634

Song, Y. J., & Peters, K. J. (2010). Self-repairing polymer optical fiber sensor. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847631

Hodgins, M., & Seelecke, S. (2010). Mechanical behavior of a bi-stable negative-rate bias spring system. Behavior and mechanics of multifunctional materials and composites 2010, 7644.

Webb, S., Peters, K., Zikry, M. A., Vella, T., Chadderdon, S., Selfridge, R., & Schultz, S. (2010). Impact induced damage assessment in composite laminates through embedded fiber Bragg gratings. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.847543

Jiang, X., Snook, K., Liu, R., Geng, X., & Hackenberger, W. S. (2010). Fabrication and Characterization of High Frequency Phased Arrays for NDE Imaging. NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2010, Vol. 7649. https://doi.org/10.1117/12.847624

Hackney, D. A., & Peters, K. J. (2010). Embedded fiber Bragg sensors for damage identification in sandwich composites after impact. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2010, Vol. 7648. https://doi.org/10.1117/12.848351

Furst, S. J., Hangekar, R., & Seelecke, S. (2010). Development, Assembly, and Validation of an SMA-Actuated 2-Joint Nozzle and 6-Channel Power Supply for Use in a Smart Inhaler System. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2010, PTS 1 AND 2, Vol. 7643. https://doi.org/10.1117/12.853399

Fang, T., Zhang, J., & Yao, S. (2010). A new family of unsteady boundary layers over a stretching surface. APPLIED MATHEMATICS AND COMPUTATION, 217(8), 3747–3755. https://doi.org/10.1016/j.amc.2010.09.031

Fang, T., & Aziz, A. (2010). Viscous Flow with Second-Order Slip Velocity over a Stretching Sheet. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES, 65(12), 1087–1092. https://doi.org/10.1515/zna-2010-1212

Park, C., Peters, K., & Zikry, M. (2010). The Effects of Embedded Optical Fiber Density on the Impact Response and Lifetime of Laminated Composites. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 21(18), 1819–1829. https://doi.org/10.1177/1045389x10390250

Tie-Gang, F., Ji, Z., & Shan-Shan, Y. (2010). Slip Magnetohydrodynamic Viscous Flow over a Permeable Shrinking Sheet. CHINESE PHYSICS LETTERS, 27(12). https://doi.org/10.1088/0256-307x/27/12/124702

Pantokratoras, A., & Fang, T. (2010). FLOW ADJACENT TO A FLAT PLATE IN A DARCY-BRINKMAN POROUS MEDIUM OSCILLATING WITH ARBITRARY PERIODIC OSCILLATION. JOURNAL OF POROUS MEDIA, 13(8), 759–763. https://doi.org/10.1615/jpormedia.v13.i8.70

June, M. S., Kribs, J., & Lyons, K. M. (2010). Efficiency of electrostatic air moving devices. JOURNAL OF ELECTROSTATICS, 68(5), 419–423. https://doi.org/10.1016/j.elstat.2010.06.001

Ward, T. (2010). Capillary-pressure driven adhesion of rigid-planar surfaces. Journal of Colloid and Interface Science, 354(2), 816–824.

Bradford, P. D., Wang, X., Zhao, H., Maria, J.-P., Jia, Q., & Zhu, Y. T. (2010). A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes. COMPOSITES SCIENCE AND TECHNOLOGY, 70(13), 1980–1985. https://doi.org/10.1016/j.compscitech.2010.07.020

Coppe, A., Haftka, R. T., Kim, N. H., & Yuan, F.-G. (2010). Uncertainty Reduction of Damage Growth Properties Using Structural Health Monitoring. JOURNAL OF AIRCRAFT, Vol. 47, pp. 2030–2038. https://doi.org/10.2514/1.c000279

Nield, D. A., & Kuznetsov, A. V. (2010). The onset of convection in a horizontal nanofluid layer of finite depth. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 29(3), 217–223. https://doi.org/10.1016/j.euromechflu.2010.02.003

Nield, D. A., & Kuznetsov, A. V. (2010). The Onset of Convection in a Layer of Cellular Porous Material: Effect of Temperature-Dependent Conductivity Arising From Radiative Transfer. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 132(7). https://doi.org/10.1115/1.4001125

Yang, C., & Ngaile, G. (2010). Preform design for forging and extrusion processes based on geometrical resemblance. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 224(B9), 1409–1423. https://doi.org/10.1243/09544054jem1799

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). MODELING TRAFFIC JAMS IN SLOW AXONAL TRANSPORT. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 10(3), 445–465. https://doi.org/10.1142/s0219519410003502

Luo, H., Spiegel, S., & Loehner, R. (2010, November). Hybrid Grid Generation Method for Complex Geometries. AIAA JOURNAL, Vol. 48, pp. 2639–2647. https://doi.org/10.2514/1.j050491

Kuznetsov, A. V. (2010). Effect of the degree of polar mismatching on traffic jam formation in fast axonal transport. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 13(6), 711–722. https://doi.org/10.1080/10255840903505154

Simmons, C. T., Kuznetsov, A. V., & Nield, D. A. (2010). Effect of strong heterogeneity on the onset of convection in a porous medium: Importance of spatial dimensionality and geologic controls. WATER RESOURCES RESEARCH, 46. https://doi.org/10.1029/2009wr008606

Kuznetsov, A. V., & Nield, D. A. (2010). Effect of Local Thermal Non-equilibrium on the Onset of Convection in a Porous Medium Layer Saturated by a Nanofluid. TRANSPORT IN POROUS MEDIA, 83(2), 425–436. https://doi.org/10.1007/s11242-009-9452-8

Ward, T., Faivre, M., & Stone, H. A. (2010). Drop production and tip-streaming phenomenon in a microfluidic flow-focusing device via an interfacial chemical reaction. Langmuir, 26(12), 9233–9239.

Lane, B. M., Shi, M., Dow, T. A., & Scattergood, R. (2010). Diamond tool wear when machining Al6061 and 1215 steel. WEAR, 268(11-12), 1434–1441. https://doi.org/10.1016/j.wear.2010.02.019

Kuznetsov, A. V. (2010). Comparison of active transport in neuronal axons and dendrites. MATHEMATICAL BIOSCIENCES, 228(2), 195–202. https://doi.org/10.1016/j.mbs.2010.10.003

Ramasubramanian, M. K., Shiffler, D. A., & Jayachandran, A. (2010). A computational fluid dynamics modeling and experimental study of the mixing process for dispersion of synthetic fibers in wet-lay forming. TAPPI Journal, 9(3), 6–13.

Cai, X., & Wu, F. (2010). Robust parameter-dependent fault-tolerant control for actuator and sensor faults. INTERNATIONAL JOURNAL OF CONTROL, 83(7), 1475–1484. https://doi.org/10.1080/00207179.2010.481024

Feng, Y., & Kleinstreuer, C. (2010). Nanofluid convective heat transfer in a parallel-disk system. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(21-22), 4619–4628. https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.031

Geng, T., Zheng, F., Kuznetsov, A. V., Roberts, W. L., & Paxson, D. E. (2010). Comparison Between Numerically Simulated and Experimentally Measured Flowfield Quantities Behind a Pulsejet. FLOW TURBULENCE AND COMBUSTION, 84(4), 653–667. https://doi.org/10.1007/s10494-010-9247-6

Avramenko, A. A., & Kuznetsov, A. V. (2010). Bio-thermal convection caused by combined effects of swimming of oxytactic bacteria and inclined temperature gradient in a shallow fluid layer. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 20(2), 157–173. https://doi.org/10.1108/09615531011016939

Fang, T., & Zhong, Y. (2010). Viscous flow over a shrinking sheet with an arbitrary surface velocity. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 15(12), 3768–3776. https://doi.org/10.1016/j.cnsns.2010.01.034

Vasudeo, N., Echekki, T., Day, M. S., & Bell, J. B. (2010). The regime diagram for premixed flame kernel-vortex interactions-Revisited. PHYSICS OF FLUIDS, 22(4). https://doi.org/10.1063/1.3372167

Dongare, A. M., Rajendran, A. M., LaMattina, B., Zikry, M. A., & Brenner, D. W. (2010). Tension-compression asymmetry in nanocrystalline Cu: High strain rate vs. quasi-static deformation. COMPUTATIONAL MATERIALS SCIENCE, 49(2), 260–265. https://doi.org/10.1016/j.commatsci.2010.05.004

Cai, X., & Wu, F. (2010). Robust fault detection and isolation for parameter-dependent LFT systems. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 20(7), 764–776. https://doi.org/10.1002/rnc.1468

Merchan-Merchan, W., Saveliev, A. V., & Cuello-Jimenez, W. (2010). Novel flame-gradient method for synthesis of metal-oxide channels, nanowires and nanorods. JOURNAL OF EXPERIMENTAL NANOSCIENCE, 5(3), 199–212. https://doi.org/10.1080/17458080903464108

Kuznetsov, A. V. (2010). Modeling organelle transport in branching dendrites with a variable cross-sectional area. Journal of Biological Physics, 36(4), 385–403. https://doi.org/10.1007/s10867-010-9191-7

Wu, M., Kuznetsov, A. V., & Jasper, W. J. (2010). Modeling of particle trajectories in an electrostatically charged channel. PHYSICS OF FLUIDS, 22(4). https://doi.org/10.1063/1.3369004

Shenoy, A. R., & Kleinstreuer, C. (2010). Influence of aspect ratio on the dynamics of a freely moving circular disk. JOURNAL OF FLUID MECHANICS, 653, 463–487. https://doi.org/10.1017/s0022112010000418

Kuznetsov, A. V. (2010). Effect of vesicle traps on traffic jam formation in fast axonal transport. MATHEMATICAL BIOSCIENCES, 226(2), 147–155. https://doi.org/10.1016/j.mbs.2010.05.003

Shi, M., Lane, B., Mooney, C. B., Dow, T. A., & Scattergood, R. O. (2010). Diamond tool wear measurement by electron-beam-induced deposition. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721. https://doi.org/10.1016/j.precisioneng.2010.03.009

Yang, Y., Xiang, P., Kong, J., & Zhou, H. (2010, June). A GPGPU Compiler for Memory Optimization and Parallelism Management. ACM SIGPLAN NOTICES, Vol. 45, pp. 86–97. https://doi.org/10.1145/1809028.1806606

Barlaz, M. A., Bareither, C. A., Hossain, A., Saquing, J., Mezzari, I., Benson, C. H., … Yazdani, R. (2010, August). Performance of North American Bioreactor Landfills. II: Chemical and Biological Characteristics. JOURNAL OF ENVIRONMENTAL ENGINEERING, Vol. 136, pp. 839–853. https://doi.org/10.1061/(asce)ee.1943-7870.0000220

Ma, T. F., Zhang, C., Feng, G. P., & Jiang, X. N. (2010). Lateral field excitation properties of langasite single crystal. Chinese Physics. B, (Beijing, China), 19(8). https://doi.org/10.1088/1674-1056/19/8/087701

Boles, J. A., Edwards, J. R., & Baurle, R. A. (2010). Large-Eddy/Reynolds-Averaged Navier-Stokes Simulations of Sonic Injection into Mach 2 Crossflow. AIAA JOURNAL, 48(7), 1444–1456. https://doi.org/10.2514/1.j050066

Chen, C., & Yuan, F.-G. (2010). Impact source identification in finite isotropic plates using a time-reversal method: theoretical study. SMART MATERIALS AND STRUCTURES, 19(10). https://doi.org/10.1088/0964-1726/19/10/105028

Vella, T., Chadderdon, S., Selfridge, R., Schultz, S., Webb, S., Park, C., … Zikry, M. (2010, September). Full-spectrum interrogation of fiber Bragg gratings at 100 kHz for detection of impact loading. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 21. https://doi.org/10.1088/0957-0233/21/9/094009

Kuznetsov, A. V., & Nield, D. A. (2010). Forced convection in a channel partly occupied by a bidisperse porous medium: Asymmetric case. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(23-24), 5167–5175. https://doi.org/10.1016/j.ijheatmasstransfer.2010.07.046

Zhao, B. Q., Pantokratoras, A., Fang, T. G., & Liao, S. J. (2010). Flow of a Weakly Conducting Fluid in a Channel Filled with a Darcy-Brinkman-Forchheimer Porous Medium. TRANSPORT IN POROUS MEDIA, 85(1), 131–142. https://doi.org/10.1007/s11242-010-9550-7

Cox, C., Gopalarathnam, A., & Hall, C. E., Jr. (2010). Flight Test of Stable Automated Cruise Flap for an Adaptive Wing Aircraft. Journal of Aircraft, 47(4), 1178–1188. https://doi.org/10.2514/1.46789

Nield, D. A., & Kuznetsov, A. V. (2010). FORCED CONVECTION WITH PHASE-LAGGED OSCILLATORY COUNTERFLOW IN A SATURATED POROUS CHANNEL. JOURNAL OF POROUS MEDIA, 13(7), 601–611. https://doi.org/10.1615/jpormedia.v13.i7.20

Merchan-Merchan, W., Saveliev, A. V., Kennedy, L., & Jimenez, W. C. (2010). [Review of Combustion synthesis of carbon nanotubes and related nanostructures]. PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 36(6), 696–727. https://doi.org/10.1016/j.pecs.2010.02.005

Guan, C., & Zhu, Y. (2010). An electrothermal microactuator with Z-shaped beams. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 20(8). https://doi.org/10.1088/0960-1317/20/8/085014

Luo, H., Luo, L., Nourgaliev, R., Mousseau, V. A., & Dinh, N. (2010). A reconstructed discontinuous Galerkin method for the compressible Navier-Stokes equations on arbitrary grids. JOURNAL OF COMPUTATIONAL PHYSICS, 229(19), 6961–6978. https://doi.org/10.1016/j.jcp.2010.05.033

Pantokratoras, A., & Fang, T. G. (2010). cox regression in nested case-control studies with auxiliary covariates. Transport in Porous Media, 83(3), 667–676.

Wang, Y. M., Lin, J. Z., & Feng, Y. (2010). The central oblique collision efficiency of spherical nanoparticles in the brownian coagulation. Modern Physics Letters. B, Condensed Matter Physics, Statistical Physics, Applied Physics, 24(14), 1523–1531.

Nield, D. A., Kuznetsov, A. V., & Simmons, C. T. (2010). The Effect of Strong Heterogeneity on the Onset of Convection in a Porous Medium: 2D/3D Localization and Spatially Correlated Random Permeability Fields. TRANSPORT IN POROUS MEDIA, 83(3), 465–477. https://doi.org/10.1007/s11242-009-9455-5

Wei, W., Nori, S., Jin, C., Narayan, J., Narayan, R. J., Ponarin, D., & Smirnov, A. (2010). Mott transition in Ga-doped MgxZn1-xO: A direct observation. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 171(1-3), 90–92. https://doi.org/10.1016/j.mseb.2010.03.078

Moore, N. J., & Lyons, K. M. (2010). Leading-edge flame fluctuations in lifted turbulent flames. Combustion Science and Technology, 182(7), 777–793. https://doi.org/10.1080/00102200903355017

Paleocrassas, A. G., & Tu, J. F. (2010). Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 210(10), 1411–1418. https://doi.org/10.1016/j.jmatprotec.2010.04.002

Jiang, G., Dawood, M., Peters, K., & Rizkalla, S. (2010). Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 9(4), 309–322. https://doi.org/10.1177/1475921709352989

York, A., Dunn, J., & Seelecke, S. (2010, September). Experimental characterization of the hysteretic and rate-dependent electromechanical behavior of dielectric electro-active polymer actuators. SMART MATERIALS & STRUCTURES, Vol. 19. https://doi.org/10.1088/0964-1726/19/9/094014

Kuznetsov, A. V. (2010). Equations describing molecular-motor-assisted transport in dendrites with a non-uniform cross-sectional area. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(7), 725–730. https://doi.org/10.1016/j.icheatmasstransfer.2010.05.020

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). Effect of diffusion on slowing the velocity of a bell-shaped wave in slow axonal transport. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(7), 770–774. https://doi.org/10.1016/j.icheatmasstransfer.2010.05.010

Hatem, T. M., & Zikry, M. A. (2010). Dynamic shear-strain localization and inclusion effects in lath martensitic steels subjected to high pressure loads. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 58(8), 1057–1072. https://doi.org/10.1016/j.jmps.2010.04.009

Hartl, A. E., & Mazzoleni, A. P. (2010). Dynamic Modeling of a Wind-Driven Tumbleweed Rover Including Atmospheric Effects. JOURNAL OF SPACECRAFT AND ROCKETS, 47(3), 493–502. https://doi.org/10.2514/1.45174

Mal, S., Narayan, J., Nori, S., Prater, J. T., & Kumar, D. (2010). Defect-mediated room temperature ferromagnetism in zinc oxide. SOLID STATE COMMUNICATIONS, 150(35-36), 1660–1664. https://doi.org/10.1016/j.ssc.2010.06.030

Zhao, H., Zhang, Y., Bradford, P. D., Zhou, Q., Jia, Q., Yuan, F.-G., & Zhu, Y. (2010). Carbon nanotube yarn strain sensors. NANOTECHNOLOGY, 21(30). https://doi.org/10.1088/0957-4484/21/30/305502

Lynch, C., Brei, D., Chaplya, P., Ounaies, Z., Kamlah, M., Seelecke, S., … Weiland, L. (2010). Adaptive and active materials: Selected papers from the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 09) (Oxnard, CA, USA, 21-23 September 2009). Smart Materials & Structures, 19(9).

Fang, T., Yao, S., Zhang, J., & Aziz, A. (2010). Viscous flow over a shrinking sheet with a second order slip flow model. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 15(7), 1831–1842. https://doi.org/10.1016/j.cnsns.2009.07.017

Kuznetsov, A. V., & Nield, D. A. (2010). The Cheng-Minkowycz problem for cellular porous materials: Effect of temperature-dependent conductivity arising from radiative transfer. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(13-14), 2676–2679. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.042

Kuznetsov, A. V., & Nield, D. A. (2010). Natural convective boundary-layer flow of a nanofluid past a vertical plate. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 49(2), 243–247. https://doi.org/10.1016/j.ijthermalsci.2009.07.015

Kuznetsov, A. V., Avramenko, A. A., & Blinov, D. G. (2010). Modeling the effect of a microtubule swirl on fast axonal transport. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(3), 234–238. https://doi.org/10.1016/j.icheatmasstransfer.2009.11.005

Bai, X., More, K., Rouleau, C. M., & Rabiei, A. (2010). Functionally graded hydroxyapatite coatings doped with antibacterial components. ACTA BIOMATERIALIA, 6(6), 2264–2273. https://doi.org/10.1016/j.actbio.2009.12.002

Nield, D. A., & Kuznetsov, A. V. (2010). Forced convection in cellular porous materials: Effect of temperature-dependent conductivity arising from radiative transfer. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(13-14), 2680–2684. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.041

Crasta, M., Clode, A. B., McMullen, R. J., Jr., Pate, D. O., & Gilger, B. C. (2010). Effect of three treatment protocols on acute ocular hypertension after phacoemulsification and aspiration of cataracts in dogs. VETERINARY OPHTHALMOLOGY, 13(1), 14–19. https://doi.org/10.1111/j.1463-5224.2009.00748.x

Kuznetsov, A. V. (2010). Effect of the width of regions with severed microtubules on transport of organelles down the axon. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(5), 443–448. https://doi.org/10.1016/j.icheatmasstransfer.2009.12.008

Propst, A., Peters, K., Zikry, M. A., Schultz, S., Kunzler, W., Zhu, Z., … Selfridge, R. (2010). Assessment of damage in composite laminates through dynamic, full-spectral interrogation of fiber Bragg grating sensors. SMART MATERIALS AND STRUCTURES, 19(1). https://doi.org/10.1088/0964-1726/19/1/015016

Aziz, A., & Fang, T. (2010). Alternative solutions for longitudinal fins of rectangular, trapezoidal, and concave parabolic profiles. Energy Conversion and Management, 51(11), 2188–2194. https://doi.org/10.1016/j.enconman.2010.03.012

Liu, L., & Yuan, F. G. (2010). A Linear Mapping Technique for Dispersion Removal of Lamb Waves. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 9(1), 75–86. https://doi.org/10.1177/1475921709341012

Ghosh, S., Choi, J.-I., & Edwards, J. R. (2010). Simulation of Shock/Boundary-Layer Interactions with Bleed Using Immersed-Boundary Methods. JOURNAL OF PROPULSION AND POWER, Vol. 26, pp. 203–214. https://doi.org/10.2514/1.45297

Joshi, S., & Peters, K. (2010, February). SMASIS Symposium on Structural Health Monitoring Preface. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 21, pp. 223–223. https://doi.org/10.1177/1045389x09359109

Kennedy, A. S., & Salem, R. (2010). [Review of Radioembolization (yttrium-90 microspheres) for primary and metastatic hepatic malignancies]. Cancer Journal, 16(2), 163–175.

Park, C., Peters, K., Zikry, M., Haber, T., Schultz, S., & Selfridge, R. (2010). Peak wavelength interrogation of fiber Bragg grating sensors during impact events. SMART MATERIALS AND STRUCTURES, 19(4). https://doi.org/10.1088/0964-1726/19/4/045015

Oberoi, R. C., Choi, J.-I., Edwards, J. R., Rosati, J. A., Thornburg, J., & Rodes, C. E. (2010). Human-Induced Particle Re-Suspension in a Room. AEROSOL SCIENCE AND TECHNOLOGY, 44(3), 216–229. https://doi.org/10.1080/02786820903530852

Ingle, N. P., King, M. W., & Zikry, M. A. (2010). Finite element analysis of barbed sutures in skin and tendon tissues. JOURNAL OF BIOMECHANICS, 43(5), 879–886. https://doi.org/10.1016/j.jbiomech.2009.11.012

Jernigan, S. R., Chanoit, G., Veeramani, A., Owen, S. B., Hilliard, M., Cormier, D., … Buckner, G. (2010). A laparoscopic knot-tying device for minimally invasive cardiac surgery☆. European Journal of Cardio-Thoracic Surgery, 37(3), 626–630. https://doi.org/10.1016/j.ejcts.2009.09.024

Avramenko, A. A., & Kuznetsov, A. V. (2010). The onset of bio-thermal convection in a suspension of gyrotactic microorganisms in a fluid layer with an inclined temperature gradient. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 20(1), 111–129. https://doi.org/10.1108/09615531011008154

Nield, D. A., & Kuznetsov, A. V. (2010). The effect of local thermal nonequilibrium on the onset of convection in a nanofluid. Journal of Heat Transfer, 132(5). https://doi.org/10.1115/1.4000474

Keistler, P. G., & Hassan, H. A. (2010, January). Simulation of Supersonic Combustion Involving H-2/Air and C2H4/Air. AIAA JOURNAL, Vol. 48, pp. 166–173. https://doi.org/10.2514/1.43213

Grunewald, N., Levy, R., Mata, M., Ward, T., & Bertozzi, A. L. (2010). Self-similarity in particle-laden flows at constant volume. Journal of Engineering Mathematics, 66(1-3), 53–63.

Ghosh, S., Choi, J.-I., & Edwards, J. R. (2010, January). Numerical Simulations of Effects of Micro Vortex Generators Using Immersed-Boundary Methods. AIAA JOURNAL, Vol. 48, pp. 92–103. https://doi.org/10.2514/1.40049

Xu, F., Qin, Q., Mishra, A., Gu, Y., & Zhu, Y. (2010). Mechanical Properties of ZnO Nanowires Under Different Loading Modes. NANO RESEARCH, 3(4), 271–280. https://doi.org/10.1007/s12274-010-1030-4

Baurle, R. A., & Edwards, J. R. (2010, March). Hybrid Reynolds-Averaged/Large-Eddy Simulations of a Coaxial Supersonic Freejet Experiment. AIAA JOURNAL, Vol. 48, pp. 551–571. https://doi.org/10.2514/1.43771

Furst, S. J., Dow, T. A., Garrard, K., & Sohn, A. (2010). Automated Part Centering With Impulse Actuation. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 132(1). https://doi.org/10.1115/1.4000681

Kleinstreuer, C., & Zhang, Z. (2010). Airflow and Particle Transport in the Human Respiratory System. ANNUAL REVIEW OF FLUID MECHANICS, Vol. 42, pp. 301–334. https://doi.org/10.1146/annurev-fluid-121108-145453

Kuznetsov, A. V., & Nield, D. A. (2010). Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid: Brinkman Model. TRANSPORT IN POROUS MEDIA, 81(3), 409–422. https://doi.org/10.1007/s11242-009-9413-2

Wu, C., Mosher, B. P., Lyons, K., & Zeng, T. (2010). Reducing Ability and Mechanism for Polyvinylpyrrolidone (PVP) in Silver Nanoparticles Synthesis. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 10(4), 2342–2347. https://doi.org/10.1166/jnn.2010.1915

Basciano, C. A., Kleinstreuer, C., Kennedy, A. S., Dezarn, W. A., & Childress, E. (2010). Computer Modeling of Controlled Microsphere Release and Targeting in a Representative Hepatic Artery System. ANNALS OF BIOMEDICAL ENGINEERING, 38(5), 1862–1879. https://doi.org/10.1007/s10439-010-9955-z

Rabiei, A. (2010). Composite metal foam and methods of preparation thereof.

Kennedy, A. S., Kleinstreuer, C., Basciano, C. A., & Dezarn, W. A. (2010). COMPUTER MODELING OF YTTRIUM-90-MICROSPHERE TRANSPORT IN THE HEPATIC ARTERIAL TREE TO IMPROVE CLINICAL OUTCOMES. INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS, 76(2), 631–637. https://doi.org/10.1016/j.ijrobp.2009.06.069

Xu, S., Bourham, M., & Rabiei, A. (2010). A novel ultra-light structure for radiation shielding. MATERIALS & DESIGN, 31(4), 2140–2146. https://doi.org/10.1016/j.matdes.2009.11.011

Kuznetsov, A. V., Nield, D. A., & Simmons, C. T. (2010). The Effect of Strong Heterogeneity on the Onset of Convection in a Porous Medium: Periodic and Localized Variation. TRANSPORT IN POROUS MEDIA, 81(1), 123–139. https://doi.org/10.1007/s11242-009-9390-5

Zhu, Y., Qin, Q., Gu, Y., & Wang, Z. L. (2010). Friction and Shear Strength at the Nanowire-Substrate Interfaces. NANOSCALE RESEARCH LETTERS, 5(2), 291–295. https://doi.org/10.1007/s11671-009-9478-4

Vendra, L., & Rabiei, A. (2010). Evaluation of modulus of elasticity of composite metal foams by experimental and numerical techniques. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(7-8), 1784–1790. https://doi.org/10.1016/j.msea.2009.11.004

Dongare, A. M., Rajendran, A. M., Lamattina, B., Brenner, D. W., & Zikry, M. A. (2010). Atomic-Scale Study of Plastic-Yield Criterion in Nanocrystalline Cu at High Strain Rates. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(2), 523–531. https://doi.org/10.1007/s11661-009-0113-x