Mechanical & Aerospace Engineering - 2012

Bucher, T. M., Emami, B., & Tafreshi, H. V. (2012, May 14). Modeling Superhydrophobic Surfaces Comprised of Randomly Deposited Fibers or Particles. Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Tafreshi, H. V., & Bucher, T. M. (2012, May 14). Modeling Transport Phenomena in Anisotropic Fibrous Media. Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Hosseini, S. A., & Tafreshi, H. V. (2012, June 4). Microscale 2-D Modeling of Instantaneous Dust Loading of Fibrous Filters. Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2012, June 4). Modeling Dust-Loading in Pleated Depth Filters. Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Tepper, G. C., Samaha, M. A., Tafreshi, H. V., & Gad-el-Hak, M. (2012). Novel Method to Characterize Superhydrophobic Coatings. Bulletin of the American Physical Society, 57(17), 100.

Barth, C. A., Samaha, M. A., Tafreshi, H. V., & Gad-el-Hak, M. (2012). Convective Air Mass Transfer in Submerged Superhydrophobic Surfaces. Bulletin of the American Physical Society, 57(17), 305.

Tafreshi, H. V., Samaha, M. A., & Gad-el-Hak, M. (2012). Sustainability of Superhydrophobicity Under Pressure. Bulletin of the American Physical Society, 57(17), 373.

Ochanda, F., Samaha, M. A., Tafreshi, H. V., Tepper, G. C., & Gad-el-Hak, M. (2012). Effects of Salinity on Drag Reduction and Longevity of Superhydrophobic Fiber Coatings. Journal of Applied Polymer Science, 123, 1112.

Gad-el-Hak, M., Samaha, M. A., & Tafreshi, H. V. (2012). Effects of Hydrostatic Pressure on the Drag Reduction of Submerged Aerogel-Particle Coatings. Bulletin of the American Physical Society, 57(17), 373.

Samaha, M. A., Tafreshi, H. V., & Gad-el-Hak, M. (2012). Influence of Flow on Longevity of Superhydrophobic Coatings. Langmuir, 28(25), 9759–9766. https://doi.org/10.1021/la301299e

Arambakam, R., Tafreshi, H. V., & Pourdeyhimi, B. (2012). Analytical Monte Carlo Ray Tracing simulation of radiative heat transfer through bimodal fibrous insulations with translucent fibers. International Journal of Heat and Mass Transfer, 55(23-24), 7234–7246. https://doi.org/10.1016/j.ijheatmasstransfer.2012.07.049

Tafreshi, H. V. (2012). Modeling Fluid Absorption in Anisotropic Fibrous Porous Media. In R. Masoodi & K. M. Pillai (Eds.), Wicking in Porous Materials: Traditional and Modern Modeling Approaches (pp. 144–173). https://doi.org/10.1201/b12972-10

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2012). A macroscale model for simulating pressure drop and collection efficiency of pleated filters over time. Separation and Purification Technology, 98, 344–355. https://doi.org/10.1016/j.seppur.2012.07.009

Bucher, T. M., Emami, B., Tafreshi, H. V., Gad-el-Hak, M., & Tepper, G. C. (2012). Modeling resistance of nanofibrous superhydrophobic coatings to hydrostatic pressures: The role of microstructure. Physics of Fluids, 24(2), 022109. https://doi.org/10.1063/1.3686833

Emami, B., Tafreshi, H. V., Gad-el-Hak, M., & Tepper, G. C. (2012). Effect of fiber orientation on shape and stability of air–water interface on submerged superhydrophobic electrospun thin coatings. Journal of Applied Physics, 111(6), 064325. https://doi.org/10.1063/1.3697895

Samaha, M. A., Tafreshi, H. V., & Gad-el-Hak, M. (2012). Superhydrophobic surfaces: From the lotus leaf to the submarine. Comptes Rendus Mécanique, 340(1-2), 18–34. https://doi.org/10.1016/j.crme.2011.11.002

Emami, B., & Tafreshi, H. V. (2012). Optimizing fiber cross-sectional shape for improving stability of air–water interface over superhydrophobic fibrous coatings. Applied Physics Letters, 100(19), 193104. https://doi.org/10.1063/1.4711800

Weng, R., Balasubramanian, K., Vermillion, C., & Kolmanovsky, I. (2012). Model Predictive Longitudinal Control of a Lighter-Than-Air Wind Energy System. Volume 2: Legged Locomotion; Mechatronic Systems; Mechatronics; Mechatronics for Aquatic Environments; MEMS Control; Model Predictive Control; Modeling and Model-Based Control of Advanced IC Engines; Presented at the ASME 2012 5th Annual Dynamic Systems and Control Conference joint with the JSME 2012 11th Motion and Vibration Conference. https://doi.org/10.1115/dscc2012-movic2012-8613

Emami, B., Vahedi Tafreshi, H., Gad-El-Hak, M., & Tepper, G. C. (2012). Predicting shape and stability of air-water interface on superhydrophobic surfaces comprised of pores with arbitrary shapes and depths. Applied Physics Letters, 100(1). https://doi.org/10.1063/1.3673619

Samaha, M. A., Vahedi Tafreshi, H., & Gad-el-Hak, M. (2012). Effects of hydrostatic pressure on the drag reduction of submerged aerogel-particle coatings. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 399, 62–70. https://doi.org/10.1016/j.colsurfa.2012.02.025

Hosseini, S. A., & Vahedi Tafreshi, H. (2012). Modeling particle-loaded single fiber efficiency and fiber drag using ANSYS-Fluent CFD code. Computers and Fluids, 66, 157–166. https://doi.org/10.1016/j.compfluid.2012.06.017

Samaha, M. A., Vahedi Tafreshi, H., & Gad-el-Hak, M. (2012). Sustainability of superhydrophobicity under pressure. Physics of Fluids, 24(11). https://doi.org/10.1063/1.4766200

Guo, S., Wang, Y., Allbritton, N., & Jiang, X. (2012). Ultrasound-induced release of micropallets with cells. Applied Physics Letters, 101(16), 163703. https://doi.org/10.1063/1.4757648

Kim, K., Zhang, S., & Jiang, X. (2012). Surface load induced electrical impedance shift in relaxor-PbTiO3 crystal piezoelectric resonators. Applied Physics Letters, 100(25), 253501. https://doi.org/10.1063/1.4729766

Yin, J., Yagüe, J. L., Eggenspieler, D., Gleason, K. K., & Boyce, M. C. (2012). Deterministic Order in Surface Micro-Topologies through Sequential Wrinkling. Advanced Materials, 24(40), 5441–5446. https://doi.org/10.1002/adma.201201937

Perkins, E., & Balachandran, B. (2012). Noise-enhanced response of nonlinear oscillators. Procedia IUTAM, 5, 59–68.

Reyhanoglu, M., Kamran, N., & Kuhara, T. (2012). Orbital and Attitude Control of a Spacecraft Around an Asteroid. Proceedings of the 2012 12th International Conference on Control, Automation and Systems, 1627–1632. New Jersey: IEEE.

Hervas, J. R., & Reyhanoglu, M. (2012). Control of a Spacecraft with Time-Varying Propellant Slosh Parameters. Proceedings of the 2012 12th International Conference on Control, Automation and Systems, 1621–1626. New Jersey: IEEE.

Rubio Hervas, J., & Reyhanoglu, M. (2012). Thrust Vector Control of an Upper-Stage Rocket with Multiple Propellant Slosh Modes. Mathematical Problems in Engineering, 2012, 848741. https://doi.org/10.1155/2012/848741

Reyhanoglu, M., & Rubio Hervas, J. (2012). Nonlinear dynamics and control of space vehicles with multiple fuel slosh modes. Control Engineering Practice, 20(9), 912–918. https://doi.org/10.1016/j.conengprac.2012.05.011

Vermillion, C., Sun, J., & Butts, K. (2012). Robust modular control system design using an inner-loop reference model and μ synthesis techniques. International Journal of Robust and Nonlinear Control, 23(12), 1338–1359. https://doi.org/10.1002/rnc.2822

Reyhanoglu, M., & Hervas, J. R. (2012). Robotically controlled sloshing suppression in point-to-point liquid container transfer. Journal of Vibration and Control, 19(14), 2137–2144. https://doi.org/10.1177/1077546312456865

Chen, X., & Yin, J. (2012). Mechanical Self-Assembly on Curved Substrates. In Mechanical Self-Assembly (pp. 171–199). https://doi.org/10.1007/978-1-4614-4562-3_9

Chen, X., & Yin, J. (2012). Mechanical Self-Assembly vs. Morphogenesis. In Mechanical Self-Assembly (pp. 9–23). https://doi.org/10.1007/978-1-4614-4562-3_2

Chen, X., & Yin, J. (2012). Mechanical Self-Assembly in Nature. In Mechanical Self-Assembly (pp. 1–8). https://doi.org/10.1007/978-1-4614-4562-3_1

Zhu, J., Zhang, X., Haldolaarachchige, N., Wang, Q., Luo, Z., Ryu, J., … Guo, Z. (2012). Polypyrrole Metacomposites with Different Nanostructures. Journal of Materials Chemistry, 22(11), 4996–5005. https://doi.org/10.1039/c2jm14020a

Agarwal, G., Lattimer, B., Ekkad, S., & Vandsburger, U. (2012). Experimental study on solid circulation in a multiple jet fluidized bed. AIChE Journal, 58(10), 3003–3015. https://doi.org/10.1002/aic.13703

Zhu, Y., & Xu, F. (2012). Buckling of Aligned Carbon Nanotubes as Stretchable Conductors: A New Manufacturing Strategy. Advanced Materials, 24(8), 1073–1077. https://doi.org/10.1002/adma.201103382

Reyhanoglu, M., & Hervas, J. R. (2012). Partial-state feedback control design for liquid container transfer with sloshing suppression. IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. Presented at the IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics. https://doi.org/10.1109/iecon.2012.6388703

Reyhanoglu, M., & Hervas, J. R. (2012). Magnetic attitude control design for small satellites via slowly-varying systems theory. IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society. Presented at the IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics. https://doi.org/10.1109/iecon.2012.6388706

Reyhanoglu, M., & Hervas, J. R. (2012). Point-to-point liquid container transfer via a PPR robot with sloshing suppression. 2012 American Control Conference (ACC). Presented at the 2012 American Control Conference - ACC 2012. https://doi.org/10.1109/acc.2012.6314687

MacKunis, W., Reyhanoglu, M., & Drakunov, S. (2012). Robust and adaptive maximum power point tracking for standalone photovoltaic systems using a sliding mode control approach. 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA). Presented at the 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA). https://doi.org/10.1109/iciea.2012.6360898

Yin, J., Retsch, M., Thomas, E. L., & Boyce, M. C. (2012). Collective Mechanical Behavior of Multilayer Colloidal Arrays of Hollow Nanoparticles. Langmuir, 28(13), 5580–5588. https://doi.org/10.1021/la300039v

Han, L., Yin, J., Wang, L., Chia, K.-K., Cohen, R. E., Rubner, M. F., … Boyce, M. C. (2012). Tunable stimulus-responsive friction mechanisms of polyelectrolyte films and tube forests. Soft Matter, 8(33), 8642. https://doi.org/10.1039/c2sm25503k

Zhang, X., Zhu, J., Haldolaarachchige, N., Ryu, J., Young, D. P., Wei, S., & Guo, Z. (2012). Synthetic process engineered polyaniline nanostructures with tunable morphology and physical properties. Polymer, 53(10), 2109–2120. https://doi.org/10.1016/j.polymer.2012.02.042

Vermillion, C., Grunnagle, T., & Kolmanovsky, I. (2012). Modeling and control design for a prototype lighter-than-air wind energy system. 2012 American Control Conference (ACC). Presented at the 2012 American Control Conference - ACC 2012. https://doi.org/10.1109/acc.2012.6315434

Grace, L. R., & Altan, M. C. (2012). Characterization of anisotropic moisture absorption in polymeric composites using hindered diffusion model. Composites Part A: Applied Science and Manufacturing, 43(8), 1187–1196. https://doi.org/10.1016/j.compositesa.2012.03.016

Vidt, M. E., Daly, M., Miller, M. E., Davis, C. C., Marsh, A. P., & Saul, K. R. (2012). Characterizing upper limb muscle volume and strength in older adults: A comparison with young adults. Journal of Biomechanics, 45(2), 334–341. https://doi.org/10.1016/j.jbiomech.2011.10.007

Pankow, M., Waas, A. M., Yen, C. F., & Ghiorse, S. (2012). Modeling the response, strength and degradation of 3D woven composites subjected to high rate loading. Composite Structures, 94(5), 1590–1604. https://doi.org/10.1016/j.compstruct.2011.12.010

Narayanaswamy, V., Raja, L. L., & Clemens, N. T. (2012). Control of unsteadiness of a shock wave/turbulent boundary layer interaction by using a pulsed-plasma-jet actuator. Physics of Fluids, 24(7), 076101. https://doi.org/10.1063/1.4731292

Jing, Y., Meral, F. C., & Clement, G. T. (2012). Time-reversal transcranial ultrasound beam focusing using a k-space method. Physics in Medicine and Biology, 57(4), 901–917. https://doi.org/10.1088/0031-9155/57/4/901

Jing, Y., Xu, J., & Fang, N. X. (2012). Numerical study of a near-zero-index acoustic metamaterial. Physics Letters A, 376(45), 2834–2837. https://doi.org/10.1016/j.physleta.2012.08.057

Richards, A. L., Dickey, M. D., Kennedy, A. S., & Buckner, G. D. (2012). Design and demonstration of a novel micro-Coulter counter utilizing liquid metal electrodes. Journal of Micromechanics and Microengineering, 22(11), 115012. https://doi.org/10.1088/0960-1317/22/11/115012

Wang, X., Yong, Z. Z., Li, Q. W., Bradford, P. D., Liu, W., Tucker, D. S., … Zhu, Y. T. (2012). Ultrastrong, Stiff and Multifunctional Carbon Nanotube Composites. Materials Research Letters, 1(1), 19–25. https://doi.org/10.1080/21663831.2012.686586

Fang, T., Zhang, J., & Zhong, Y. (2012). Boundary layer flow over a stretching sheet with variable thickness. Applied Mathematics and Computation, 218(13), 7241–7252. https://doi.org/10.1016/j.amc.2011.12.094

Ramesh, K., Gopalarathnam, A., Edwards, J., Ol, M., & Granlund, K. (2012). An unsteady airfoil theory applied to pitching motions validated against experiment and computation. Theoretical and Computational Fluid Dynamics. https://doi.org/10.1007/s00162-012-0292-8

Liu, J. (2012). Thermal transport across carbon nanotubes connected by molecular linkers. Carbon. https://doi.org/10.1016/j.carbon.2011.10.014

Liu, J. (2012). Length-dependent thermal conductivity of single extended polymer chains. Physical Review B. https://doi.org/10.1103/physrevb.86.104307

Daly, A., Zannetti, P., & Echekki, T. (2012). A combination of fire and dispersion modeling techniques for simulating a warehouse fire. International Journal of Safety and Security Engineering, 2(4), 368–380. https://doi.org/10.2495/SAFE-V2-N4-368-380

Shekhawat, Y., & Echekki, T. (2012). An ODT-based multiscale radiative transport model in participating (absorbing-emitting) gray media. 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. https://doi.org/10.2514/6.2012-210

Sedhai, S., & Echekki, T. (2012). An ODT-based flame embedding approach for turbulent non-premixed combustion. 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. https://doi.org/10.2514/6.2012-181

Sriram, P. S., Gopalarathnam, A., & Misenheimer, A. (2012). High-Downforce Airfoil Design for Motorsports. SAE International Journal of Materials and Manufacturing, 5(2), 478–489. https://doi.org/10.4271/2012-01-1168

Gong, X., An, L., & Xu, C. (2012). Wireless passive sensor development for harsh environment applications. 2012 IEEE International Workshop on Antenna Technology, iWAT 2012, 140–143. https://doi.org/10.1109/IWAT.2012.6178418

Shao, G., Zhao, G., Yang, F., Xu, C., & An, L. (2012). Ceramic nanocomposites reinforced with a high volume fraction of carbon nanofibers. Materials Letters, 68, 108–111. https://doi.org/10.1016/j.matlet.2011.10.031

Xu, C., & Shin, Y. C. (2012). A multilevel fuzzy control design for a class of multiinput single-output systems. IEEE Transactions on Industrial Electronics, 59(8), 3113–3123. https://doi.org/10.1109/TIE.2011.2158033

Huang, S., & Huang, H.-Y. S. (2012). Virtual Experiments of Heart Valve Tissues. 2012 Annual International Conference of the Ieee Engineering in Medicine and Biology Society (Embc), 6645–6648. https://doi.org/10.1109/EMBC.2012.6347518

Huang, H.-Y. S., & Huang, S. (2012). Real-Time Strain Mapping via Biaxial Stretching in Heart Valve Tissues. 2012 Annual International Conference of the Ieee Engineering in Medicine and Biology Society (Embc), 6653–6656. https://doi.org/10.1109/EMBC.2012.6347520

Ji, Y., Hernandez, M., Giesecke, D., Bartles, D., & Xu, C. (2012). Tool Wear Analysis Using Wavelet Transform Based Cutting Force and Acoustic Emission. Journal of Aviation and Aerospace Perspective, 2(2), 35–54.

Baik, Y. S., Bernal, L. P., Granlund, K., & Ol, M. V. (2012). Unsteady force generation and vortex dynamics of pitching and plunging aerofoils. JOURNAL OF FLUID MECHANICS, 709, 37–68. https://doi.org/10.1017/jfm.2012.318

Albers, L. (2012). Recommending hydrogen fuel cell retrofits for forklifts in energy audit reports by industrial assessment centers. Proceedings of the American Society for Engineering Education, 00956–00910.

Bakshi, S., Guo, S. J., & Jiang, X. N. (2012). Multi-frequency focused ultrasound for tissue ablation. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, vol 2, 665–670. https://doi.org/10.1115/imece2011-64076

Kribs, J. D., Hasan, T. S., & Lyons, K. M. (2012). Nitrogen diluted jet flames in the presence of coflowing air. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 4, pts A and B, 1415–1421.

Kuznetsov, A. V. (2012). Modeling mass transport in axonal transport drug delivery. Proceedings of the ASME Summer Heat Transfer Conference, 2012, vol 1, 991–999. https://doi.org/10.1115/ht2012-58025

Hasan, T. S., Kribs, J. D., & Lyons, K. M. (2012). Influences of nitrogen dilution in the near flow field of transition regime lifted natural gas jet flames. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 1, 907–912.

Kim, K., Zhang, S., Tian, J., Han, P., & Jiang, X. (2012). Face-shear Mode Ultrasonic Tactile Sensor Array. 2012 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), pp. 1059–1062. https://doi.org/10.1109/ultsym.2012.0265

Wang, Y. X., & Huang, H. Y. S. (2012). Comparison of lithium-ion battery cathode materials and the internal stress development. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 4, pts A and B, 1685–1694.

Zhu, Y. (2012). A new electrothermal microactuator with Z-shaped beams: Design and operation. Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2010, vol 12, 77–81. https://doi.org/10.1115/imece2010-38611

Foster, G., Holland, M., Ferguson, S., & Deluca, W. (2012). The creation of design modules for use in engineering design education. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol 7, 23–36. https://doi.org/10.1115/detc2012-71181

Crews, J. H., & Buckner, G. D. (2012). Multi-objective design optimization of a shape memory alloy actuated robotic catheter. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), vol 1, 381–389. https://doi.org/10.1115/smasis2011-5037

Ferguson, S., Olewnik, A., & Cormier, P. (2012). Exploring marketing to engineering information mapping in mass customization: A presentation of ideas, challenges and resulting questions. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 609–623. https://doi.org/10.1115/detc2011-48742

Turner, C., Ferguson, S., & Donndelinger, J. (2012). Exploring heterogeneity of customer preference to balance commonality and market coverage. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 67–79. https://doi.org/10.1115/detc2011-48581

Sullivan, E., Ferguson, S., & Donndelinger, J. (2012). Exploring differences in preference heterogeneity representation and their influence in product family design. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 81–92. https://doi.org/10.1115/detc2011-48596

Crews, J. H., & Smith, R. C. (2012). Density function optimization for the homogenized energy model of shape memory alloys. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2011), vol 1, 371–379. https://doi.org/10.1115/smasis2011-5036

Li, J., Kleinstreuer, C., & Feng, Y. (2012). Computational analysis of thermal performance and entropy generation of nanofluid flow in microchannels. Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference, 2012, 135–144.

Foster, G., & Ferguson, S. (2012). Assessing the effectiveness of using graveyard data for generating design alternatives. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011, vol 5, pts A and B, 563–576. https://doi.org/10.1115/detc2011-48636

Bryant, M., Mahtani, R. L., & Garcia, E. (2012). Wake synergies enhance performance in aeroelastic vibration energy harvesting. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 23(10), 1131–1141. https://doi.org/10.1177/1045389x12443599

Duan, C., & Wu, F. (2012). Output feedback control for continuous-time switched linear systems subject to actuator saturation. Proceedings of the ASME Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control (DSCC 2011), vol 1, 449–456. https://doi.org/10.1115/dscc2011-5925

Dutta, S., Moghaddam, G. K., Bhattacharya, S., & Gould, R. (2012). Novel power electronics overload and temperature rise and time interval prediction based on dynamic thermal modeling. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 11, 809–813. https://doi.org/10.1115/imece2011-64048

Hays, S., & Wu, F. (2012). Nonlinear robust H-infinity control with state-dependent scaling. Proceedings of the ASME Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control (DSCC 2011), vol 1, 581–588. https://doi.org/10.1115/dscc2011-5994

Haigh, C. D., Crews, J. H., Wang, S. Q., & Buckner, G. D. (2012). Modeling and experimental validation of shape memory alloy bending actuators. Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol 2, 79–87.

Karimi-Moghaddam, G., Rende, C., Gould, R. D., & Bhattacharya, S. (2012). Investigation of high performance heat sink characteristics in forced convection cooling of power electronic systems. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 11, 815–821. https://doi.org/10.1115/imece2011-64318

Huang, W. B., Kim, K., Zhang, S. J., Yuan, F. G., & Jiang, X. N. (2012). Flexoelectric materials and structures for M/NEMS. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2011, vol 11, 761–766. https://doi.org/10.1115/imece2011-64520

Shafer, M. W., Bryant, M., & Garcia, E. (2012). Erratum: Designing maximum power output into piezoelectric energy harvesters. Smart Materials and Structures, 21(10), 109601. https://doi.org/10.1088/0964-1726/21/10/109601

Zhang, J., & Fang, T. G. (2012). Simultaneous imaging of oh star chemiluminescence and flame luminosity of diesel and biodiesel spray combustion. Proceedings of the ASME Internal Combustion Engine Division Fall Technical Conference (ICEF), 415–421. https://doi.org/10.1115/icef2011-60103

Jernigan, S. R., Fortney, B., Fahmy, Y., & Buckner, G. D. (2012). Implementing effective low-cost laboratory experiments into a distance engineering program. Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), vol 6, 87–94. https://doi.org/10.1115/imece2010-40938

Jangale, V. V., Saveliev, A., Zelepouga, S., Gnatenko, V., & Pratapas, J. M. (2012). Heating value sensor for producer gas. Proceedings of the ASME Internal Combustion Engine Division Fall Technical Conference (ICEF), 817–822. https://doi.org/10.1115/icef2011-60197

Howard, A. K. T. (2012). Enhancing student engagement in engineering statics with online tools. Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), vol 6, 59–64. https://doi.org/10.1115/imece2010-38363

Kuznetsov, A. V. (2012). Modelling transport of layered double hydroxide nanoparticles in axons and dendrites of cortical neurons. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 15(12), 1263–1271. https://doi.org/10.1080/10255842.2011.585977

Karimi-Moghaddam, G., Gould, R. D., Madhusoodhanan, S., Hatua, K., Bhattacharya, S., Leslie, S., … Grider, D. (2012). Thermal design considerations for 12kV SiC n-IGBT based 3L NPC converter. 2012 IEEE Energy Conversion Congress and Exposition (ECCE), 2180–2186. https://doi.org/10.1109/ecce.2012.6342445

Kuznetsov, A. V. (2012). MODELING OF ORGANELLE ENTRY IN AN AXON AND DENDRITE. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 12(5). https://doi.org/10.1142/s0219519412500261

Wang, Y., & Huang, H.-Y. S. (2012). Lithium-Ion Battery Materials and Mechanical Stress Fields. TSEST Transaction on Control and Mechanical Systems, 1(5), 192–200.

Akyildiz, H. I., Padbury, R. P., Parsons, G. N., & Jur, J. S. (2012). Temperature and Exposure Dependence of Hybrid Organic-Inorganic Layer Formation by Sequential Vapor Infiltration into Polymer Fibers. LANGMUIR, 28(44), 15697–15704. https://doi.org/10.1021/la302991c

Lim, S. D., Mazzoleni, A. P., Park, J. K., Ro, P. I., & Quinlan, B. (2012). Conceptual design of ocean compressed air energy storage system. 2012 Oceans. https://doi.org/10.1109/oceans.2012.6404909

Park, J. K., Ro, P. I., Lim, S. D., Mazzoleni, A. P., & Quinlan, B. (2012). Analysis and optimization of a quasi-isothermal compression and expansion cycle for Ocean Compressed Air Energy Storage (OCAES). 2012 Oceans. https://doi.org/10.1109/oceans.2012.6404964

Fang, T., & Tao, H. (2012). Unsteady viscous flow over a rotating stretchable disk with deceleration. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 17(12), 5064–5072. https://doi.org/10.1016/j.cnsns.2012.04.017

Lohmeyer, W. Q., & DeJarnette, F. R. (2012). Transition from laminar to turbulent boundary layers. Journal of Spacecraft and Rockets, 49(4), 766–768.

Duan, C., & Wu, F. (2012). Output-feedback control for switched linear systems subject to actuator saturation. INTERNATIONAL JOURNAL OF CONTROL, 85(10), 1532–1545. https://doi.org/10.1080/00207179.2012.691611

Ghosh, S., Edwards, J. R., & Choi, J.-I. (2012). Numerical Simulation of Effects of Mesoflaps in Controlling Shock/Boundary-Layer Interactions. JOURNAL OF PROPULSION AND POWER, 28(5), 955–970. https://doi.org/10.2514/1.b34297

Fang, T., Tao, H., & Zhong, Y. (2012). Note on the Unsteady Mixed Boundary Layer in a Porous Medium with Temperature Slip: Exact Solutions. TRANSPORT IN POROUS MEDIA, 94(1), 189–196. https://doi.org/10.1007/s11242-012-9996-x

Qin, Q., Xu, F., Cao, Y., Ro, P. I., & Zhu, Y. (2012). Measuring True Young's Modulus of a Cantilevered Nanowire: Effect of Clamping on Resonance Frequency. Small, 8(16), 2571–2576. https://doi.org/10.1002/smll.201200314

Wang, W.-C., Roberts, W. L., & Stikeleather, L. F. (2012). Hydrocarbon Fuels From Gas Phase Decarboxylation of Hydrolyzed Free Fatty Acid. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 134(3). https://doi.org/10.1115/1.4006867

Kuznetsov, I. A., Saveliev, A. V., Rasipuram, S., Kuznetsov, A. V., Brown, A., & Jasper, W. (2012). Development of Active Porous Medium Filters Based on Plasma Textiles. POROUS MEDIA AND ITS APPLICATIONS IN SCIENCE, ENGINEERING, AND INDUSTRY, Vol. 1453, pp. 265–270. https://doi.org/10.1063/1.4711186

Huang, H.-Y. S., & Wang, Y.-X. R. (2012). An overview of lithium-ion battery cathode materials. Materials Research Society Symposium Proceedings, 1363-RR05-30.

Ro, H. W., Akgun, B., Brendan T. O'Connor, Hammond, M., Kline, R. J., Snyder, C. R., … DeLongchamp, D. M. (2012). Poly(3-hexylthiophene) and [6,6]-Phenyl-C-61-butyric Acid Methyl Ester Mixing in Organic Solar Cells. MACROMOLECULES, 45(16), 6587–6599. https://doi.org/10.1021/ma3008527

Furst, S. J., Crews, J. H., & Seelecke, S. (2012). Numerical and experimental analysis of inhomogeneities in SMA wires induced by thermal boundary conditions. Continuum Mechanics and Thermodynamics, 24(4-6), 485–504.

Gangadharan, S., Kuznetsov, A. V., Zhu, H., Hinestroza, J., & Jasper, W. J. (2012). Modeling of Cross-Flow Across an Electrostatically Charged Monolith Filter. PARTICULATE SCIENCE AND TECHNOLOGY, 30(5), 461–473. https://doi.org/10.1080/02726351.2011.604394

Stamps, M. A., & Huang, H.-Y. S. (2012). Mixed Modes Fracture and Fatigue Evaluation for Lithium-ion Batteries. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 97–103. https://doi.org/10.1115/imece2012-88037

Kuznetsov, A. V., & Bubnovich, V. (2012). Investigation of simultaneous effects of gyrotactic and oxytactic microorganisms on nanofluid bio-thermal convection in porous media. Journal of Porous Media, 15(7), 617–631. https://doi.org/10.1615/jpormedia.v15.i7.20

Johnston, J., & Gopalarathnam, A. (2012). Investigation of a bio-inspired lift-enhancing effector on a 2D airfoil. Bioinspiration & Biomimetics, 7(3), 036003. https://doi.org/10.1088/1748-3182/7/3/036003

Xu, F., & Zhu, Y. (2012). Highly Conductive and Stretchable Silver Nanowire Conductors. ADVANCED MATERIALS, 24(37), 5117–5122. https://doi.org/10.1002/adma.201201886

Lee, W. M., & Zikry, M. A. (2012). High strain-rate modeling of the interfacial effects of dispersed particles in high strength aluminum alloys. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 49(23-24), 3291–3300. https://doi.org/10.1016/j.ijsolstr.2012.07.003

Harrington, J. T., McMullen, R. J., Jr., Cullen, J. M., & Gilger, B. C. (2012). Evaluation of diode endoscopic cyclophotocoagulation in bovine cadaver eyes. AMERICAN JOURNAL OF VETERINARY RESEARCH, 73(9), 1445–1452. https://doi.org/10.2460/ajvr.73.9.1445

Mal, S., Nori, S., Mula, S., Narayan, J., & Prater, J. T. (2012). Defect mediated reversible ferromagnetism in Co and Mn doped zinc oxide epitaxial films. Journal of Applied Physics, 112(11).

Feng, Y. (2012). Comments on paper: "Transport and deposition on ellipsoidal fibers in low reynolds number flows" from L. Tian, G. Ahmadi, Z. Wang, PK Hopke, Journal of Aerosol Science, 45, (2012) 1-18. Journal of Aerosol Science, 52, 127–128.

Thelen, J., Dickey, M. D., & Ward, T. (2012). A study of the production and reversible stability of EGaIn liquid metal microspheres using flow focusing. LAB ON A CHIP, 12(20), 3961–3967. https://doi.org/10.1039/c2lc40492c

Kuznetsov, A. V. (2012). A model of axonal transport drug delivery: effects of diffusivity. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING, 28(11), 1083–1092. https://doi.org/10.1002/cnm.2469

Jing, Y., Wang, T., & Clement, G. T. (2012). A k-Space Method for Moderately Nonlinear Wave Propagation. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 59(8), 1664–1673. https://doi.org/10.1109/tuffc.2012.2372

ChiuHuang, C.-K., & Huang, H.-Y. S. (2012). A Diffusion Model in a Two-Phase Interfacial Zone for Nanoscale Lithium-ion Battery Materials. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 1231–1237. https://doi.org/10.1115/imece2012-89235

Huang, H.-Y. S., Balhouse, B. N., & Huang, S. (2012). A Biomechanical and Biochemical Synergy Study of Heart Valve Tissue. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 235–240. https://doi.org/10.1115/imece2012-87997

Zhang, Z., Kleinstreuer, C., & Feng, Y. (2012). Vapor deposition during cigarette smoke inhalation in a subject-specific human airway model. JOURNAL OF AEROSOL SCIENCE, 53, 40–60. https://doi.org/10.1016/j.jaerosci.2012.05.008

Zheng, C., Cheng, L., Bingue, J. P., Saveliev, A., & Cen, K. (2012). Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow. ENERGY & FUELS, 26(8), 4849–4856. https://doi.org/10.1021/ef300851z

Huang, W., Yan, X., Kwon, S. R., Zhang, S., Yuan, F.-G., & Jiang, X. (2012). Flexoelectric strain gradient detection using Ba0.64Sr0.36TiO3 for sensing. APPLIED PHYSICS LETTERS, 101(25). https://doi.org/10.1063/1.4772803

Clode, A. B., Miller, C., McMullen, R. J., Jr., & Gilger, B. C. (2012). A retrospective comparison of surgical removal and subsequent CO2 laser ablation versus topical administration of mitomycin C as therapy for equine corneolimbal squamous cell carcinoma. VETERINARY OPHTHALMOLOGY, 15(4), 254–262. https://doi.org/10.1111/j.1463-5224.2011.00982.x

Huang, S., & Huang, H.-Y. S. (2012). Virtual experiments of heart valve tissues. IEEE Engineering in Medicine and Biology Society Conference Proceedings, 324–349.

McKenzie, C., & Parness, A. (2012). Video summary of DROP the durable reconnaissance and observation platform. 2012 IEEE International Conference on Robotics and Automation (ICRA), 3535–3536.

Avramenko, A. A., Blinov, D. G., Shevchuk, I. V., & Kuznetsov, A. V. (2012). Symmetry analysis and self-similar forms of fluid flow and heat-mass transfer in turbulent boundary layer flow of a nanofluid. PHYSICS OF FLUIDS, 24(9). https://doi.org/10.1063/1.4753945

Kim, K., Zhang, S., & Jiang, X. (2012). Surface Acoustic Load Sensing Using a Face-Shear PIN-PMN-PT Single-Crystal Resonator. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 59(11), 2548–2554. https://doi.org/10.1109/tuffc.2012.2488

Huang, H.-Y. S., & Huang, S. (2012). Real-time strain mapping via biaxial stretching in heart valve tissues. IEEE Engineering in Medicine and Biology Society Conference Proceedings, 324–349.

Merchan-Merchan, W., Saveliev, A. V., Sanmiguel, S. G., & Farahani, M. F. (2012). Flame volume synthesis of carbon-coated WO3 nanoplatelets and nanorods. JOURNAL OF NANOPARTICLE RESEARCH, 14(12). https://doi.org/10.1007/s11051-012-1276-8

Elkhodary, K. I., & Zikry, M. A. (2012). Dynamic crack nucleation, propagation, and interactions with crystalline secondary phases in aluminum alloys subjected to large deformations. PHILOSOPHICAL MAGAZINE, 92(32), 3920–3949. https://doi.org/10.1080/14786435.2012.700126

Crews, J. H., Smith, R. C., Pender, K. M., Hannen, J. C., & Buckner, G. D. (2012). Data-driven techniques to estimate parameters in the homogenized energy model for shape memory alloys. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 23(17), 1897–1920. https://doi.org/10.1177/1045389x12453965

Huang, H.-Y. S., Balhouse, B. N., & Huang, S. (2012). Application of simple biomechanical and biochemical tests to heart valve leaflets: Implications for heart valve characterization and tissue engineering. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226(11), 868–876. https://doi.org/10.1177/0954411912455004

Kuznetsov, A. V. (2012). A THREE-KINETIC-STATE MODEL OF AXONAL TRANSPORT DRUG DELIVERY. JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 12(3). https://doi.org/10.1142/s021951941100468x

Kuznetsov, A. V., & Nield, D. A. (2012). The onset of double-diffusive convection in a vertical cylinder occupied by a heterogeneous porous medium with vertical throughflow. Transport in Porous Media, 95(2), 327–336. https://doi.org/10.1007/s11242-012-0045-6

Song, Y. J., & Peters, K. J. (2012). Self-repairing, interferometric waveguide sensor with a large strain range. APPLIED OPTICS, 51(28), 6886–6895. https://doi.org/10.1364/ao.51.006886

Zdanowicz, E., Dow, T. A., & Scattergood, R. O. (2012). Rapid fabrication of nanostructured surfaces using nanocoining. NANOTECHNOLOGY, 23(41). https://doi.org/10.1088/0957-4484/23/41/415303

Park, C., & Peters, K. (2012). Optimization of Embedded Sensor Placement for Structural Health Monitoring of Composite Airframes. AIAA JOURNAL, 50(11), 2536–2545. https://doi.org/10.2514/1.j051729

Tie-Gang, F., Hua, T., & Yong-Fang, Z. (2012). Non-Newtonian Power-Law Fluid Flow over a Shrinking Sheet. CHINESE PHYSICS LETTERS, 29(11). https://doi.org/10.1088/0256-307x/29/11/114703

Hannen, J. C., Crews, J. H., & Buckner, G. D. (2012). Indirect intelligent sliding mode control of a shape memory alloy actuated flexible beam using hysteretic recurrent neural networks. SMART MATERIALS AND STRUCTURES, 21(8). https://doi.org/10.1088/0964-1726/21/8/085015

Chen, C., Li, Y., & Yuan, F.-G. (2012). Impact source identification in finite isotropic plates using a time-reversal method: experimental study. SMART MATERIALS AND STRUCTURES, 21(10). https://doi.org/10.1088/0964-1726/21/10/105025

Kuznetsov, A. V., Blinov, D. G., Avramenko, A. A., & Kuznetsov, I. A. (2012). Error correction in intracellular transport: Numerical investigation of rerouting of a pulse of misdirected axonal cargos in a dendrite. COMPUTERS IN BIOLOGY AND MEDICINE, 42(12), 1196–1203. https://doi.org/10.1016/j.compbiomed.2012.09.011

Kuznetsov, A. V. (2012). Effect of kinesin velocity distribution on slow axonal transport. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 10(4), 779–788. https://doi.org/10.2478/s11534-012-0051-x

White, A. R., & Ward, T. (2012). CO2 sequestration in a radial Hele-Shaw cell via an interfacial chemical reaction. Chaos (Woodbury, N.Y.), 22(3).

Kuznetsov, A. V. (2012). An exact solution describing slow axonal transport of cytoskeletal elements: the effect of a finite half-life. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 468(2147), 3384–3397. https://doi.org/10.1098/rspa.2012.0061

Luo, H., Luo, L., & Nourgaliev, R. (2012). A Reconstructed Discontinuous Galerkin Method for the Euler Equations on Arbitrary Grids. COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 12(5), 1495–1519. https://doi.org/10.4208/cicp.250911.030212a

Ouyang, J., & Zhu, Y. (2012). Z-Shaped MEMS Thermal Actuators: Piezoresistive Self-Sensing and Preliminary Results for Feedback Control. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 21(3), 596–604. https://doi.org/10.1109/jmems.2012.2189361

Gieseking, D. A., & Edwards, J. R. (2012, October). Study of a Compression-Ramp Interaction Using Large-Eddy Simulation/Reynolds-Averaged Navier-Stokes Models. AIAA JOURNAL, Vol. 50, pp. 2057–2068. https://doi.org/10.2514/1.j051195

Zhang, Z., Kleinstreuer, C., & Hyun, S. (2012). Size-change and deposition of conventional and composite cigarette smoke particles during inhalation in a subject-specific airway model. JOURNAL OF AEROSOL SCIENCE, 46, 34–52. https://doi.org/10.1016/j.jaerosci.2011.12.002

Vitchuli, N., Shi, Q., Nowak, J., Nawalakhe, R., Sieber, M., Bourham, M., … Zhang, X. (2012). Plasma-Electrospinning Hybrid Process and Plasma Pretreatment to Improve Adhesive Properties of Nanofibers on Fabric Surface. PLASMA CHEMISTRY AND PLASMA PROCESSING, 32(2), 275–291. https://doi.org/10.1007/s11090-011-9341-0

Zheng, C., Cheng, L., Cen, K., Bingue, J. P., & Saveliev, A. (2012). Partial oxidation of methane in a reciprocal flow porous burner with an external heat source. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 37(5), 4119–4126. https://doi.org/10.1016/j.ijhydene.2011.11.142

Gowda, B. D., & Echekki, T. (2012). One-dimensional turbulence simulations of hydrogen-fueled HCCI combustion. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 37(9), 7912–7924. https://doi.org/10.1016/j.ijhydene.2012.02.020

Toledo, M. G., Utria, K. S., Gonzalez, F. A., Zuniga, J. P., & Saveliev, A. V. (2012). Hybrid filtration combustion of natural gas and coal. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 37(8), 6942–6948. https://doi.org/10.1016/j.ijhydene.2012.01.061

Elkhodary, K. I., & Zikry, M. A. (2012). Dynamic crack nucleation and propagation in polycrystalline aluminum aggregates subjected to large inelastic deformations. INTERNATIONAL JOURNAL OF FRACTURE, 175(2), 95–108. https://doi.org/10.1007/s10704-012-9705-3

Shanthraj, P., & Zikry, M. A. (2012). Dislocation-density mechanisms for void interactions in crystalline materials. INTERNATIONAL JOURNAL OF PLASTICITY, 34, 154–163. https://doi.org/10.1016/j.ijplas.2012.01.008

Gowda, B. D., & Echekki, T. (2012). Complex injection strategies for hydrogen-fueled HCCI engines. FUEL, 97, 418–427. https://doi.org/10.1016/j.fuel.2012.01.060

Tendulkar, S., Mirmalek-Sani, S. H., Childers, C., Saul, J., Opara, E. C., & Ramasubramanian, M. K. (2012). A three-dimensional microfluidic approach to scaling up microencapsulation of cells. Biomedical Microdevices, 14(3), 461–469.

Winfrey, A. L., Abd Al-Halim, M. A., Gilligan, J. G., Saveliev, A. V., & Bourham, M. A. (2012). A Study of Plasma Parameters in a Capillary Discharge With Calculations Using Ideal and Nonideal Plasma Models for Comparison With Experiment. IEEE TRANSACTIONS ON PLASMA SCIENCE, 40(3), 843–852. https://doi.org/10.1109/tps.2011.2179985

Luo, H., Xia, Y., Li, S., Nourgaliev, R., & Cai, C. (2012). A Hermite WENO reconstruction-based discontinuous Galerkin method for the Euler equations on tetrahedral grids. JOURNAL OF COMPUTATIONAL PHYSICS, 231(16), 5489–5503. https://doi.org/10.1016/j.jcp.2012.05.011

Xu, F., Wang, X., Zhu, Y., & Zhu, Y. (2012). Wavy Ribbons of Carbon Nanotubes for Stretchable Conductors. ADVANCED FUNCTIONAL MATERIALS, 22(6), 1279–1283. https://doi.org/10.1002/adfm.201102032

Nield, D. A., & Kuznetsov, A. V. (2012). The Onset of Convection in a Layer of a Porous Medium Saturated by a Nanofluid: Effects of Conductivity and Viscosity Variation and Cross-Diffusion. TRANSPORT IN POROUS MEDIA, 92(3), 837–846. https://doi.org/10.1007/s11242-011-9935-2

Kuznetsov, A. V., & Nield, D. A. (2012). The Effect of Strong Heterogeneity and Strong Throughflow on the Onset of Convection in a Porous Medium: Periodic and Localized Variation. TRANSPORT IN POROUS MEDIA, 92(2), 289–298. https://doi.org/10.1007/s11242-011-9902-y

Coldwell, D., Sangro, B., Salem, R., Wasan, H., & Kennedy, A. (2012). [Review of Radioembolization in the treatment of unresectable liver tumors experience across a range of primary cancers]. American Journal of Clinical Oncology-Cancer Clinical Trials, 35(2), 167–177.

Fang, T., Zhang, J., & Zhong, Y. (2012). Note on unsteady viscous flow on the outside of an expanding or contracting cylinder. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 17(8), 3124–3128. https://doi.org/10.1016/j.cnsns.2011.12.013

Choi, J.-I., Edwards, J. R., Rosati, J. A., & Eisner, A. D. (2012). Large Eddy Simulation of Particle Re-suspension During a Footstep. AEROSOL SCIENCE AND TECHNOLOGY, 46(7), 767–780. https://doi.org/10.1080/02786826.2011.631613

Lee, W. M., & Zikry, M. A. (2012). Dispersed particle and triple junction interactions in aluminum alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 535, 264–273. https://doi.org/10.1016/j.msea.2011.12.081

Zhou, L., Yang, Y. J., & Yuan, F. G. (2012). Design of a magnetostrictive sensor for structural health monitoring of non-ferromagnetic plates. Journal of Vibroengineering, 14(1), 280–291.

Yao, S., & Fang, T. (2012). Analytical solutions of laminar swirl decay in a straight pipe. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 17(8), 3235–3246. https://doi.org/10.1016/j.cnsns.2011.11.038

Dongare, A. M., LaMattina, B., Irving, D. L., Rajendran, A. M., Zikry, M. A., & Brenner, D. W. (2012). An angular-dependent embedded atom method (A-EAM) interatomic potential to model thermodynamic and mechanical behavior of Al/Si composite materials. Modelling and Simulation in Materials Science and Engineering, 20(3), 035007. https://doi.org/10.1088/0965-0393/20/3/035007

Kuznetsov, A. V. (2012). A model of axonal transport drug delivery. CENTRAL EUROPEAN JOURNAL OF PHYSICS, 10(2), 320–328. https://doi.org/10.2478/s11534-011-0116-2

Song, Y., & Peters, K. (2012). Self-repairing waveguide sensor with highly repeatable strain response. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2012, Vol. 8346. https://doi.org/10.1117/12.914904

Shanthraj, P., & Zikry, M. A. (2012). Optimal microstructures for martensitic steels. JOURNAL OF MATERIALS RESEARCH, 27(12), 1598–1611. https://doi.org/10.1557/jmr.2012.127

Webb, S., Peters, K., Zikry, M. A., Chadderdon, S., Nikola, S., Selfridge, R., & Schultz, S. (2012). Full-spectral interrogation of fiber Bragg grating sensors for measurements of damage during steady-state vibration. SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2012, Vol. 8346. https://doi.org/10.1117/12.915150

Hamouda, T., Peters, K., & Seyam, A.-F. M. (2012). Effect of resin type on the signal integrity of an embedded perfluorinated polymer optical fiber. SMART MATERIALS AND STRUCTURES, 21(5). https://doi.org/10.1088/0964-1726/21/5/055023

Crews, J. H., & Buckner, G. D. (2012). Design optimization of a shape memory alloy-actuated robotic catheter. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 23(5), 545–562. https://doi.org/10.1177/1045389x12436738

Wang, W. C., Lin, W. H., Kuo, C. P., & Wu, J. Y. (2012). [Review of The relation between dioxin concentration from exhaust gas of diesel engine and chlorine content]. Journal of Analytical and Applied Pyrolysis, 94, 10–16.

Salem, H. G., Lee, W. M., Bodelot, L., Ravichandran, G., & Zikry, M. A. (2012). Quasi-Static and High-Strain-Rate Experimental Microstructural Investigation of a High-Strength Aluminum Alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A(6), 1895–1901. https://doi.org/10.1007/s11661-011-1064-6

Gurarslan, A., Joijode, A. S., & Tonelli, A. E. (2012, June 15). Polymers coalesced from their cyclodextrin inclusion complexes: What can they tell us about the morphology of melt-crystallized polymers? JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, Vol. 50, pp. 813–823. https://doi.org/10.1002/polb.23074

Liu, W., Zhao, H., Inoue, Y., Wang, X., Bradford, P. D., Kim, H., … Zhu, Y. (2012). Poly(vinyl alcohol) reinforced with large-diameter carbon nanotubes via spray winding. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 43(4), 587–592. https://doi.org/10.1016/j.compositesa.2011.12.029

Kuznetsov, A. V. (2012). NANOFLUID BIOCONVECTION IN POROUS MEDIA: OXYTACTIC MICROORGANISMS. JOURNAL OF POROUS MEDIA, 15(3), 233–248. https://doi.org/10.1615/jpormedia.v15.i3.30

Lee, W. M., & Zikry, M. A. (2012). Modeling the interfacial plastic strain incompatibilities associated with dispersed particles in high strength aluminum alloys. ACTA MATERIALIA, 60(4), 1669–1679. https://doi.org/10.1016/j.actamat.2011.11.058

Yao, S., Zhang, J., & Fang, T. (2012). Effect of viscosities on structure and instability of sprays from a swirl atomizer. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 39, 158–166. https://doi.org/10.1016/j.expthermflusci.2012.01.020

Kim, K., Zhang, S., Salazar, G., & Jiang, X. (2012). Design, fabrication and characterization of high temperature piezoelectric vibration sensor using YCOB crystals. SENSORS AND ACTUATORS A-PHYSICAL, 178, 40–48. https://doi.org/10.1016/j.sna.2012.02.003

Fang, T. (2012, February). Comments on "Analytic heat and mass transfer of the mixed hydrodynamic/thermal slip MHD viscous flow over a stretching sheet, International Journal of Mechanical Sciences 53 (2011) 886-896, by M. Turkyilmazoglu". https://doi.org/10.1016/j.ijmecsci.2011.12.008

Niu, Y.-Y., & Edwards, J. R. (2012). A simple incompressible flux splitting for sharp free surface capturing. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 69(10), 1661–1678. https://doi.org/10.1002/fld.2658

Kleinstreuer, C., & Feng, Y. (2012, May). Thermal Nanofluid Property Model With Application to Nanofluid Flow in a Parallel-Disk System-Part I: A New Thermal Conductivity Model for Nanofluid Flow. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 134. https://doi.org/10.1115/1.4005632

Feng, Y., & Kleinstreuer, C. (2012, May). Thermal Nanofluid Property Model With Application to Nanofluid Flow in a Parallel Disk System-Part II: Nanofluid Flow Between Parallel Disks. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 134. https://doi.org/10.1115/1.4005633

Hartl, A. E., & Mazzoleni, A. P. (2012). Terrain modeling and simulation of a tumbleweed rover traversing martian rock fields. Journal of Spacecraft and Rockets, 49(2), 401–412. https://doi.org/10.2514/1.57903

Fugon, D., Chen, C., & Peters, K. (2012). Self-Healing Sandwich Composite Structures. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2012, PTS 1 AND 2, Vol. 8345. https://doi.org/10.1117/12.915165

Ngaile, G., & Welch, G. (2012). Optimal load path input in tube hydroforming machines. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 226(B4), 694–707. https://doi.org/10.1177/0954405411428421

Park, K.-C., Choi, H. J., Chang, C.-H., Cohen, R. E., McKinley, G. H., & Barbastathis, G. (2012). Nanotextured Silica Surfaces with Robust Superhydrophobicity and Omnidirectional Broadband Supertransmissivity. ACS NANO, 6(5), 3789–3799. https://doi.org/10.1021/nn301112t

Kuznetsov, A. V. (2012). Modeling transport of tau in an axon after a photobleaching experiment. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39(3), 331–335. https://doi.org/10.1016/j.icheatmasstransfer.2012.01.013

Kuznetsov, A. V. (2012). Modeling the effect of degradative pathway associated with Nodes of Ranvier on axonal transport drug delivery. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 39(3), 325–330. https://doi.org/10.1016/j.icheatmasstransfer.2012.01.012

Crews, J. H., & Smith, R. C. (2012). Modeling and Bayesian Parameter Estimation for Shape Memory Alloy Bending Actuators. BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2012, Vol. 8342. https://doi.org/10.1117/12.914792

Wang, W. C. (2012). Laboratory investigation of drying process of Illinois coals. Powder Technology, 225, 72–85.

Wang, W.-C., Thapaliya, N., Campos, A., Stikeleather, L. F., & Roberts, W. L. (2012). Hydrocarbon fuels from vegetable oils via hydrolysis and thermo-catalytic decarboxylation. FUEL, 95(1), 622–629. https://doi.org/10.1016/j.fuel.2011.12.041

Zhang, J., Jing, W., & Fang, T. (2012). High speed imaging of OH* chemiluminescence and natural luminosity of low temperature diesel spray combustion. FUEL, 99, 226–234. https://doi.org/10.1016/j.fuel.2012.04.031

Peters, K. (2012). Full-spectrum FBG analysis of inhomogeneous, fast-varying strain effects. THIRD ASIA PACIFIC OPTICAL SENSORS CONFERENCE, Vol. 8351. https://doi.org/10.1117/12.916010

Cusher, A. A., & Gopalarathnam, A. (2012). Drag Reduction Methodology for Adaptive Tailless Aircraft. Journal of Aircraft, 49(1), 161–172. https://doi.org/10.2514/1.c031454

Shadow Huang, H.-Y., & Wang, Y.-X. (2012). Dislocation Based Stress Developments in Lithium-Ion Batteries. Journal of The Electrochemical Society, 159(6), A815–A821. https://doi.org/10.1149/2.090206jes

Kennedy, A., Coldwell, D., Sangro, B., Wasan, H., & Salem, R. (2012). [Review of Radioembolization for the treatment of liver tumors general principles]. American Journal of Clinical Oncology-Cancer Clinical Trials, 35(1), 91–99.

Kuznetsov, A. V. (2012). NANOFLUID BIOCONVECTION IN A HORIZONTAL FLUID-SATURATED POROUS LAYER. JOURNAL OF POROUS MEDIA, 15(1), 11–27. https://doi.org/10.1615/jpormedia.v15.i1.20

Fang, T., Yao, S., Zhang, J., Zhong, Y., & Tao, H. (2012). Momentum and heat transfer of the Falkner-Skan flow with algebraic decay: An analytical solution. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 17(6), 2476–2488. https://doi.org/10.1016/j.cnsns.2011.10.021

Kennedy, A., Coldwell, D., Sangro, B., Wasan, H., & Salem, R. (2012). [Review of Integrating radioembolization ((90)Y Microspheres) into current treatment options for liver tumors introduction to the international working group report]. American Journal of Clinical Oncology-Cancer Clinical Trials, 35(1), 81–90.

Park, C., & Peters, K. (2012). Comparison of damage measures based on fiber Bragg grating spectra. MEASUREMENT SCIENCE AND TECHNOLOGY, 23(2). https://doi.org/10.1088/0957-0233/23/2/025105

Bai, X., Sandukas, S., Appleford, M., Ong, J. L., & Rabiei, A. (2012). Antibacterial effect and cytotoxicity of Ag-doped functionally graded hydroxyapatite coatings. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 100B(2), 553–561. https://doi.org/10.1002/jbm.b.31985

Nield, D. A., & Kuznetsov, A. V. (2012). The Effect of Strong Heterogeneity and Strong Throughflow on the Onset of Convection in a Porous Medium: Non-Periodic Global Variation. TRANSPORT IN POROUS MEDIA, 91(3), 927–938. https://doi.org/10.1007/s11242-011-9881-z

Park, J., & Echekki, T. (2012). LES-ODT study of turbulent premixed interacting flames. COMBUSTION AND FLAME, 159(2), 609–620. https://doi.org/10.1016/j.combustflame.2011.08.002

Ward, T., & Hourigan, W. (2012). Granular segregation in a tilted-rotating drum. Powder Technology, 215-16, 227–234.

Kuznetsov, A. V. (2012). Nanofluid bioconvection: interaction of microorganisms oxytactic upswimming, nanoparticle distribution, and heating/cooling from below. THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 26(1-4), 291–310. https://doi.org/10.1007/s00162-011-0230-1

Richards, A. L., Kleinstreuer, C., Kennedy, A. S., Childress, E., & Buckner, G. D. (2012). Experimental Microsphere Targeting in a Representative Hepatic Artery System. IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 59(1), 198–204. https://doi.org/10.1109/tbme.2011.2170195

Luo, H., Segawa, H., & Visbal, M. R. (2012). An implicit discontinuous Galerkin method for the unsteady compressible Navier-Stokes equations. COMPUTERS & FLUIDS, 53, 133–144. https://doi.org/10.1016/j.compfluid.2011.10.009

Zhu, Y., Qin, Q., Xu, F., Fan, F., Ding, Y., Zhang, T., … Wang, Z. L. (2012). Size effects on elasticity, yielding, and fracture of silver nanowires: In situ experiments. PHYSICAL REVIEW B, 85(4). https://doi.org/10.1103/physrevb.85.045443

Ramasubramanian, M. K., Venditti, R. A., & Gillella, P. K. (2012). Sensor systems for high-speed intelligent sorting of waste paper in recycling. TAPPI Journal, 11(2), 33–39.

Fang, T., & Zhong, Y. (2012, January 31). Reply to "Comment on "Unsteady stagnation-point flow over a plate moving along the direction of flow impingement" by Y. Zhong and T. Fang, Int. J. Heat MassTransfer 54 (2011)3103-3108". https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.040

Lau, W. Y., Kennedy, A. S., Kim, Y. H., Lai, H. K., Lee, R. C., Leung, T. W. T., … Wang, S. C. (2012). Patient selection and activity planning guide for selective internal radiotherapy with yttrium-90 resin microspheres. International Journal of Radiation Oncology, Biology, Physics, 82(1), 401–407.

Jing, Y. (2012). On the use of an absorption layer for the angular spectrum approach (L). JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 131(2), 999–1002. https://doi.org/10.1121/1.3675967

Edwards, J. R., Boles, J. A., & Baurle, R. A. (2012). Large-eddy/Reynolds-averaged Navier-Stokes simulation of a supersonic reacting wall jet. COMBUSTION AND FLAME, 159(3), 1127–1138. https://doi.org/10.1016/j.combustflame.2011.10.009

Choi, J.-I., & Edwards, J. R. (2012). Large-eddy simulation of human-induced contaminant transport in room compartments. INDOOR AIR, 22(1), 77–87. https://doi.org/10.1111/j.1600-0668.2011.00741.x

An, J., Haftka, R. T., Kim, N. H., Yuan, F.-G., Kwak, B. M., Sohn, H., & Yeum, C. M. (2012). Experimental study on identifying cracks of increasing size using ultrasonic excitation. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 11(1), 95–108. https://doi.org/10.1177/1475921711406581

Liu, L., Liu, S. T., & Yuan, F. G. (2012). Damage localization using a power-efficient distributed on-board signal processing algorithm in a wireless sensor network. Smart Materials & Structures, 21(2). https://doi.org/10.1088/0964-1726/21/2/025005