Mechanical and Aerospace Engineering - 2017 Heiranian, M., Wu, Y., & Aluru, N. R. (2017). Molybdenum disulfide and water interaction parameters. Journal of Chemical Physics, 147(10). https://doi.org/10.1063/1.5001264 Barati Farimani, A., Heiranian, M., Min, K., & Aluru, N. R. (2017). Antibody Subclass Detection Using Graphene Nanopores. Journal of Physical Chemistry Letters, 8(7), 1670–1676. https://doi.org/10.1021/acs.jpclett.7b00385 Rather, A. M., Jana, N., Hazarika, P., & Manna, U. (2017). Sustainable polymeric material for the facile and repetitive removal of oil-spills through the complementary use of both selective-absorption and active-filtration processes. Journal of Materials Chemistry A, 5(44), 23339–23348. https://doi.org/10.1039/c7ta07982f Rather, A. M., Jana, N., Begum, S., Srivastava, H. K., & Manna, U. (2017). Exceptional control on physical properties of a polymeric material through alcoholic solvent-mediated environment-friendly Michael addition reaction. Green Chemistry, 19(19), 4527–4532. https://doi.org/10.1039/c7gc02286g Parbat, D., Gaffar, S., Rather, A. M., Gupta, A., & Manna, U. (2017). A general and facile chemical avenue for the controlled and extreme regulation of water wettability in air and oil wettability under water. Chemical Science, 8(9), 6542–6554. https://doi.org/10.1039/c7sc02296d Rather, A. M., Mahato, S., Maji, K., Gogoi, N., & Manna, U. (2017). 'Reactive' nano-complex coated medical cotton: A facile avenue for tailored release of small molecules. Nanoscale, 9(42), 16154–16165. https://doi.org/10.1039/c7nr03990e Rather, A. M., & Manna, U. (2017). Stretchable and durable superhydrophobicity that acts both in air and under oil. Journal of Materials Chemistry A, 5(29), 15208–15216. https://doi.org/10.1039/c7ta04073c Das, A., Deka, J., Rather, A. M., Bhunia, B. K., Saikia, P. P., Mandal, B. B., … Manna, U. (2017). Strategic Formulation of Graphene Oxide Sheets for Flexible Monoliths and Robust Polymeric Coatings Embedded with Durable Bioinspired Wettability †. ACS Applied Materials and Interfaces, 9(48), 42354–42365. https://doi.org/10.1021/acsami.7b14028 Sarkar, S., Patel, R. L., Liang, X., & Park, J. (2017). Unveiling the Role of CeO2 Atomic Layer Deposition Coatings on LiMn2O4 Cathode Materials: An Experimental and Theoretical Study. ACS Applied Materials Interfaces. https://doi.org/10.1021/acsami.7b06988 Carter, D. (2017). Insect Residue Height for Different Conditions and Coatings. GEM Consortium Annual Board Meeting Technical Presentation Competition. Presented at the GEM Consortium Annual Board Meeting Technical Presentation Competition. Lam, K.-Y., Pickles, J. D., Narayanaswamy, V., Carter, C. D., & Kimmel, R. L. (2017). High-speed schlieren and 10-Hz Kr PLIF for the new AFRL mach-6 Ludwieg tube hypersonic wind tunnel. AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2017-0550 Pickles, J. D., Mettu, B. R., Subbareddy, P. K., & Narayanaswamy, V. (2017). Sharp-fin induced shock wave/turbulent boundary layer interactions in an axisymmetric configuration. 47th AIAA Fluid Dynamics Conference, 2017. https://doi.org/10.2514/6.2017-4314 Ley, K., & Narayanaswamy, V. (2017). Parametric study of forced ignition in laminar and turbulent methane jets. 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. https://doi.org/10.2514/6.2017-4770 Funderburk, M. L., & Narayanaswamy, V. (2017). Experimental investigation of shock boundary layer interactions in axisymmetric isolator geometries. 53rd AIAA/SAE/ASEE Joint Propulsion Conference, 2017. https://doi.org/10.2514/6.2017-5052 Ji, Y., Singh, P., Ekkad, S. V., & Zang, S. (2017). Numerical investigation of scoop effect on film cooling for cylindrical inclined hole. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8. https://doi.org/10.1115/IMECE2017-70184 Kedukodi, S., Park, S., Gadiraju, S., Ekkad, S., Kim, Y., & Srinivasan, R. (2017). Numerical & experimental investigations for flow fields under non-reacting & reacting conditions through a lean premixed fuel nozzle. Proceedings of the ASME Turbo Expo, 5C-2017. https://doi.org/10.1115/GT2017-64911 Gomez-Ramirez, D., Ekkad, S. V., Moon, H.-K., Kim, Y., & Srinivasan, R. (2017). Isothermal coherent structures and turbulent flow produced by a gas turbine combustor lean pre-mixed swirl fuel nozzle. Experimental Thermal and Fluid Science, 81, 187–201. https://doi.org/10.1016/j.expthermflusci.2016.10.010 Singh, P., Ji, Y., Zhang, M., & Ekkad, S. V. (2017). Heat transfer enhancement by criss-cross pattern formed by 45° Angled rib turbulators in a straight square duct. ASME 2017 Heat Transfer Summer Conference, HT 2017, 1. https://doi.org/10.1115/HT2017-4908 Roy, A., Jain, S., Ekkad, S. V., Ng, W., Lohaus, A. S., Crawford, M. E., & Abraham, S. (2017). Heat Transfer Performance of a Transonic Turbine Blade Passage in the Presence of Leakage Flow Through Upstream Slot and Mateface Gap With Endwall Contouring. Journal of Turbomachinery, 139(12). https://doi.org/10.1115/1.4037909 Ramesh, S., LeBlanc, C., Narzary, D., Ekkad, S., & Anne Alvin, M. (2017). Film Cooling Performance of Tripod Antivortex Injection Holes Over the Pressure and Suction Surfaces of a Nozzle Guide Vane. Journal of Thermal Science and Engineering Applications, 9(2). https://doi.org/10.1115/1.4035290 Singh, P., & Ekkad, S. (2017). Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples. Applied Thermal Engineering, 116, 205–216. https://doi.org/10.1016/j.applthermaleng.2017.01.098 Gomez-Ramirez, D., Kedukodi, S., Ekkad, S. V., Moon, H.-K. X., Kim, Y., & Srinivasan, R. (2017). Investigation of isothermal convective heat transfer in an optical combustor with a low-emissions swirl fuel nozzle. Applied Thermal Engineering, 114, 65–76. https://doi.org/10.1016/j.applthermaleng.2016.11.154 Park, S., Gomez-Ramirez, D., Gadiraju, S., Kedukodi, S., Ekkad, S., Moon, H.-K., … Srinivasan, R. (2017). Flow field and wall temperature measurements for reacting flow in a lean premixed swirl stabilized can combustor. Proceedings of the ASME Turbo Expo, 5C-2017. https://doi.org/10.1115/GT2017-64837 Panchal, K. V., Abraham, S., Roy, A., Ekkad, S. V., Ng, W., Lohaus, A. S., & Crawford, M. E. (2017). Effect of endwall contouring on a transonic turbine blade passage: Heat transfer performance. Journal of Turbomachinery, 139(1). https://doi.org/10.1115/1.4034411 Ekkad, S. V., & Han, J.-C. (2017). A transient liquid crystal image technique for local heat transfer distributions near a sharp 180° turn of a two-pass smooth square channel. Journal of Flow Visualization and Image Processing, 24(1-4), 127–140. https://doi.org/10.1615/jflowvisimageproc.v24.i1-4.90 Singh, P., & Ekkad, S. V. (2017). Experimental investigation of rotating rib roughened two-pass square duct with two different channel orientations. Proceedings of the ASME Turbo Expo, 5A-2017. https://doi.org/10.1115/GT2017-64225 Boulanger, A., Hutchinson, J., Ng, W. F., Ekkad, S. V., Keefe, M. J., Xu, W., … Hsu, K. (2017). Experimental based empirical model of the initial onset of sand deposits on hastelloy-X from 1000°C to 1100°C using particle tracking. Proceedings of the ASME Turbo Expo, 2D-2017. https://doi.org/10.1115/GT2017-64480 Singh, P., Li, W., Ekkad, S. V., & Ren, J. (2017). Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR = 1:2) under rotating and stationary conditions. International Journal of Heat and Mass Transfer, 113, 384–398. https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.085 Singh, P., & Ekkad, S. V. (2017). Effects of spent air removal scheme on internal-side heat transfer in an impingement-effusion system at low jet-to-target plate spacing. International Journal of Heat and Mass Transfer, 108, 998–1010. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.104 Singh, P., Pandit, J., & Ekkad, S. V. (2017). Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples. International Journal of Heat and Mass Transfer, 106, 629–647. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.037 Gadiraju, S., Park, S., Gomez-Ramirez, D., Ekkad, S. V., Todd Lowe, K., Moon, H.-K., … Srinivasan, R. (2017). Application of proper orthogonal decomposition to high speed imaging for the study of combustion oscillations. Proceedings of the ASME Turbo Expo, Part F130041-4B. https://doi.org/10.1115/GT2017-64602 Singh, P., Li, W., Ekkad, S. V., & Ren, J. (2017). A new cooling design for rib roughened two-pass channel having positive effects of rotation on heat transfer enhancement on both pressure and suction side internal walls of a gas turbine blade. International Journal of Heat and Mass Transfer, 115, 6–20. https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.128 TruongVo, T. N., Kennedy, R. M., Chen, H., Chen, A., Berndt, A., Agarwal, M., … others. (2017). Microfluidic channel for characterizing normal and breast cancer cells. Journal of Micromechanics and Microengineering, 27(3), 035017. Amrei, M. M., & Tafreshi, H. V. (2017, September 4). Novel Approach to Measuring Droplet Detachment Force from Fibers. Presented at the Virginia Soft Matter Symposium, James Madison University. Davoudi, M., Amrei, M. M., Chase, G. G., & Tafreshi, H. V. (2017, April 10). Droplet interactions with smooth and rough fibers. Presented at the American Filtration and Separations Society, Louisville, Kentucky. Venkateshan, D. G., & Tafreshi, H. V. (2017, September 4). Modelling Drag Reduction and Droplet Mobility over Superhydrophobic wire screen. Presented at the Virginia Soft Matter Symposium, James Madison University. Aziz, H., Amrei, M. M., Dotivala, A., Tang, C., & Tafreshi, H. V. (2017). Modeling Cassie droplets on superhydrophobic coatings with orthogonal fibrous structures. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 512, 61–70. https://doi.org/10.1016/j.colsurfa.2016.10.031 Amrei, M. M., Davoudi, M., Chase, G. G., & Tafreshi, H. V. (2017). Effects of roughness on droplet apparent contact angles on a fiber. Separation and Purification Technology, 180, 107–113. https://doi.org/10.1016/j.seppur.2017.02.049 Lee, A. J., Moosavian, A., & Inman, D. J. (2017). Control and characterization of a bistable laminate generated with piezoelectricity. Smart Materials and Structures, 26(8), 085007. https://doi.org/10.1088/1361-665x/aa7165 Lee, A. J., Moosavian, A., & Inman, D. J. (2017). Piezoelectrically strained bistable laminates with macro fiber composites. Proceedings of SPIE - The International Society for Optical Engineering, 10164. https://doi.org/10.1117/12.2257680 Lee, A. J., Moosavian, A., & Inman, D. J. (2017). A piezoelectrically generated bistable laminate for morphing. Materials Letters, 190, 123–126. https://doi.org/10.1016/j.matlet.2017.01.005 Moosavian, A., Chae, E. J., Pankonien, A. M., Lee, A. J., & Inman, D. J. (2017). A parametric study on a bio-inspired continuously morphing trailing edge. Proceedings of SPIE - The International Society for Optical Engineering, 10162. https://doi.org/10.1117/12.2257582 Bedewy, M., Hu, J., & Hart, A. J. (2017). Precision control of nanoparticle monolayer assembly: Optimizing rate and crystal quality. 2017 IEEE 17th International Conference on Nanotechnology, NANO 2017, 286–289. https://doi.org/10.1109/NANO.2017.8117489 Dozie-Nwachukwu, S. O., Obayemi, J. D., Danyuo, Y. T., Etuk-Udo, G., Chi, Y., Hu, J., … Soboyejo, W. O. (2017). Biosynthesis of Gold Nanoparticles and Gold/Prodigiosin Nanoparticles with Serratia marcescens Bacteria. Waste and Biomass Valorization, 8(6), 2045–2059. https://doi.org/10.1007/s12649-016-9734-7 Obayemi, J. D., Hu, J., Uzonwanne, V. O., Odusanya, O. S., Malatesta, K., Anuku, N., & Soboyejo, W. O. (2017). Adhesion of ligand-conjugated biosynthesized magnetite nanoparticles to triple negative breast cancer cells. Journal of the Mechanical Behavior of Biomedical Materials, 68, 276–286. https://doi.org/10.1016/j.jmbbm.2017.02.004 Su, H., Shang, W., Li, G., & Fischer, G. S. (2017). MRI-Guided Telesurgery System Using a Fabry-Perot Interferometry Force Sensor and a Pneumatic Haptic Device. Annals of Biomedical Engineering. Su, H., Iordorchita, I., Tokuda, J., Hata, N., Liu, X., & Fischer, G. S. (2017). Fiber Optic Force Sensors for MRI-Guided Interventions and Rehabilitation. IEEE Sensors Journal. Kim, H., Torres, F., Islam, T., Islam, D., Chavez, L. A., Rosales, C. A. G., … Lin, Y. (2017). Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing – CORRIGENDUM. MRS Communications, 7(4), 974–974. https://doi.org/10.1557/mrc.2017.129 Kim, H., Torres, F., Islam, M. T., Islam, M. D., Chavez, L. A., Garcia Rosales, C. A., … Lin, Y. (2017). Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing. MRS Communications, 7(4), 960–966. https://doi.org/10.1557/mrc.2017.126 Tanvir, A. N. M., Islam, M. D., & Ahmed, F. (2017). Analysis of thermoelastic characteristics in a thick walled FGM cylinder. AIP Conference Proceedings, Vol. 1919. https://doi.org/10.1063/1.5018548 Perkins, E. (2017). Stochastic Effects on a Chaotic Duffing Oscillator. Presented at the International Microelectronics Assembly and Packaging Society, 13th International Conference and Exhibition on Device Packaging, Fountain Hills, AZ. Perkins, E. (2017). Frequency response of p-mode intrinsic localized mode. Presented at the 9th European Nonlinear Dynamics Conference, Budapest, Hungary. Perkins, E. (2017). Effects of noise on the frequency response of the monostable Duffing oscillator. Physics Letters A, 381(11), 1009–1013. Huang, S., Kim, T., Hou, D., Cann, D., Jones, J. L., & Jiang, X. (2017). Flexoelectric characterization of BaTiO3-0.08Bi(Zn1/2Ti1/2)O3. Applied Physics Letters, 110(22), 222904. https://doi.org/10.1063/1.4984212 Reyhanoglu, M. (Ed.). (2017). Dynamical Systems: Analytical and Computational Techniques. https://doi.org/10.5772/63189 Stebler, S., MacKunis, W., Ramos-Pedroza, N., & Reyhanoglu, M. (2017). A dynamic neural network-based sliding mode observer method for a class of uncertain dynamic systems. 2017 IEEE Conference on Control Technology and Applications (CCTA). Presented at the 2017 IEEE Conference on Control Technology and Applications (CCTA), Mauna Lai, Hawaii. https://doi.org/10.1109/CCTA.2017.8062431 Hoffman, D., Rehan, M., MacKunis, W., & Reyhanoglu, M. (2017). Robust quaternion-based nonlinear output feedback control of a quadrotor hover system. 2017 IEEE 56th Annual Conference on Decision and Control (CDC). Presented at the 2017 IEEE 56th Annual Conference on Decision and Control (CDC), Melbourne, Victoria, Australia. https://doi.org/10.1109/CDC.2017.8264379 Kayacan, E., Khanesar, M. A., Rubio-Hervas, J., & Reyhanoglu, M. (2017). Learning Control of Fixed-Wing Unmanned Aerial Vehicles Using Fuzzy Neural Networks. International Journal of Aerospace Engineering, 2017, 1–12. https://doi.org/10.1155/2017/5402809 Baheri, A., Ramaprabhu, P., & Vermillion, C. (2017). Iterative In-Situ 3D Layout Optimization of a Reconfigurable Ocean Current Turbine Array Using Bayesian Optimization. ASME 2017 Dynamic Systems and Control Conference : October 11-13, 2017, Tysons, Virginia, USA., 3. https://doi.org/10.1115/dscc2017-5230 Tang, Y., & Yin, J. (2017). Design of cut unit geometry in hierarchical kirigami-based auxetic metamaterials for high stretchability and compressibility. Extreme Mechanics Letters, 12, 77–85. https://doi.org/10.1016/j.eml.2016.07.005 Zhang, Q., Wommer, J., O’Rourke, C., Teitelman, J., Tang, Y., Robison, J., … Yin, J. (2017). Origami and kirigami inspired self-folding for programming three-dimensional shape shifting of polymer sheets with light. Extreme Mechanics Letters, 11, 111–120. https://doi.org/10.1016/j.eml.2016.08.004 Hopkins, X., Gill, W., Kringel, R., Wang, G., Hass, J., Acharya, S., … Choi, D. (2017). Radio frequency-mediated local thermotherapy for destruction of pancreatic tumors using Ni–Au core–shell nanowires. Nanotechnology, 28(3), 03LT01. https://doi.org/10.1088/1361-6528/28/3/03LT01 Baheri, A., & Vermillion, C. (2017). Context-Dependent Bayesian Optimization in Real-Time Control; A Case Study in Airborne Wind Energy Systems. Proceedings of BayesOpt 2017. Presented at the NIPS Workshop on Bayesian Optimization, Long Beach, CA. Deodhar, N., Bafandeh, A., Deese, J., Smith, B., Muyimbwa, T., Vermillion, C., & Tkacik, P. (2017). Laboratory-Scale Flight Characterization of a Multitethered Aerostat for Wind Energy Generation. AIAA Journal, 55(6), 1823–1832. https://doi.org/10.2514/1.j054407 Deodhar, N., Deese, J., & Vermillion, C. (2017). Experimentally Infused Plant and Controller Optimization Using Iterative Design of Experiments—Theoretical Framework and Airborne Wind Energy Case Study. Journal of Dynamic Systems, Measurement, and Control, 140(1). https://doi.org/10.1115/1.4037014 Deese, J., Deodhar, N., & Vermillion, C. (2017). Nested Plant/Controller Co-Design Using G-Optimal Design and Extremum Seeking: Theoretical Framework and Application to an Airborne Wind Energy System * *This work was supported by NSF grant number 1453912, entitled CAREER: Efficient Experimental Optimization for High Performance Airborne Wind Energy Systems. IFAC-PapersOnLine, 50(1), 11965–11971. https://doi.org/10.1016/j.ifacol.2017.08.1182 Tan, K. T., Elamin, M., & Li, B. (2017). Impact performance and damage behavior of composite sandwich structures In arctic condition. 32nd Technical Conference of the American Society for Composites 2017, 2, 1309–1314. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85047767450&partnerID=MN8TOARS Elamin, M., Li, B., & Tan, K. T. (2017). Effect of low temperature on impact behavior of composite sandwich structures. ICCM International Conferences on Composite Materials, 2017-August. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85053168143&partnerID=MN8TOARS Reyhanoglu, M., & Rehan, M. (2017). Nonlinear Dynamics and Control of Aerial Robots. In Aerial Robots - Aerodynamics, Control and Applications. https://doi.org/10.5772/intechopen.69641 Rehan, M., Reyhanoglu, M., & McClamroch, H. (2017). Motion planning for a knife-edge on the surface of a hyperboloid. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287363 Hoffman, D., & Reyhanoglu, M. (2017). Geometric tracking control of a three-dimensional revolute joint robot. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287245 Reyhanoglu, M., & Hoffman, D. (2017). Finite-time control of a compliant base robot manipulator. 2017 11th Asian Control Conference (ASCC). Presented at the 2017 11th Asian Control Conference (ASCC). https://doi.org/10.1109/ASCC.2017.8287365 Stebler, S., Campobasso, M., Kidambi, K., MacKunis, W., & Reyhanoglu, M. (2017). Dynamic neural network-based sliding mode estimation of quadrotor systems. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/ACC.2017.7963344 Ramos-Pedroza, N., MacKunis, W., & Reyhanoglu, M. (2017). Synthetic Jet Actuator-Based Aircraft Tracking Using a Continuous Robust Nonlinear Control Strategy. International Journal of Aerospace Engineering, 2017, 1–13. https://doi.org/10.1155/2017/4934281 McClamroch, H., Reyhanoglu, M., & Rehan, M. (2017). Knife-Edge Motion on a Surface as a Nonholonomic Control Problem. IEEE Control Systems Letters, 1(1), 26–31. https://doi.org/10.1109/lcsys.2017.2700441 Han, B., Ma, T., Vergara, J. H., Palmese, G. R., Yin, J., Lee, D., & Han, L. (2017). Non-additive impacts of covalent cross-linking on the viscoelastic nanomechanics of ionic polyelectrolyte complexes. RSC Advances, 7(84), 53334–53345. https://doi.org/10.1039/c7ra08514a Lin, G., Chandrasekaran, P., Lv, C., Zhang, Q., Tang, Y., Han, L., & Yin, J. (2017). Self-similar Hierarchical Wrinkles as a Potential Multifunctional Smart Window with Simultaneously Tunable Transparency, Structural Color, and Droplet Transport. ACS Applied Materials & Interfaces, 9(31), 26510–26517. https://doi.org/10.1021/acsami.7b05056 Lin, G., Ge, D., Tang, Y., Xia, Y., Wu, G., Han, L., … Yin, J. (2017). Cuts Guided Deterministic Buckling in Arrays of Soft Parallel Plates for Multifunctionality. ACS Applied Materials & Interfaces, 9(34), 29345–29354. https://doi.org/10.1021/acsami.7b09466 Zhang, Q., Tang, Y., Hajfathalian, M., Chen, C., Turner, K. T., Dikin, D. A., … Yin, J. (2017). Spontaneous Periodic Delamination of Thin Films To Form Crack-Free Metal and Silicon Ribbons with High Stretchability. ACS Applied Materials & Interfaces, 9(51), 44938–44947. https://doi.org/10.1021/acsami.7b15693 Mosey, A., Gaire, B., Kim, J., Ryu, J. E., & Cheng, R. (2017). Tunable cobalt nanoparticle synthesis by intense pulse flash annealing. AIP Advances, 7(5), 056308. https://doi.org/10.1063/1.4975044 Cao, Y., Huang, J., Peng, X., Cao, D., Galaska, A., Qiu, S., … Guo, Z. (2017). Poly(vinylidene fluoride) derived fluorine-doped magnetic carbon nanoadsorbents for enhanced chromium removal. Carbon, 115, 503–514. https://doi.org/10.1016/j.carbon.2017.01.033 Chen, A., Wang, L., Li, B.-Y., Sherman, J., Ryu, J. E., Hamamura, K., … Yokota, H. (2017). Reduction in Migratory Phenotype in a Metastasized Breast Cancer Cell Line via Downregulation of S100A4 and GRM3. Scientific Reports, 7(1), 3459–3460. https://doi.org/10.1038/s41598-017-03811-9 Bafandeh, A., & Vermillion, C. (2017). Altitude Optimization of Airborne Wind Energy Systems via Switched Extremum Seeking—Design, Analysis, and Economic Assessment. IEEE Transactions on Control Systems Technology, 25(6), 2022–2033. https://doi.org/10.1109/tcst.2016.2632534 Baheri, A., Bin-Karim, S., Bafandeh, A., & Vermillion, C. (2017). Real-time control using Bayesian optimization: A case study in airborne wind energy systems. Control Engineering Practice, 69, 131–140. https://doi.org/10.1016/j.conengprac.2017.09.007 Kehs, M., Cobb, M., Fathy, H. K., & Vermillion, C. (2017). Insights from an experimental study on the crosswind flight of a lab-scale buoyant air turbine. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/acc.2017.7963809 Baheri, A., & Vermillion, C. (2017). Altitude optimization of Airborne Wind Energy systems: A Bayesian Optimization approach. 2017 American Control Conference (ACC). Presented at the 2017 American Control Conference (ACC). https://doi.org/10.23919/acc.2017.7963143 Kalabić, U., Vermillion, C., & Kolmanovsky, I. (2017). Constraint Enforcement for a Lighter-than-Air Wind-Energy System: An Application of Reference Governors with Chance Constraints. IFAC-PapersOnLine, 50(1), 13258–13263. https://doi.org/10.1016/j.ifacol.2017.08.1962 Bafandeh, A., Bin-Karim, S., & Vermillion, C. (2017). Fused local-global control of spatiotemporally-varying systems: A case study in airborne wind energy. 2017 IEEE Conference on Control Technology and Applications (CCTA). Presented at the 2017 IEEE Conference on Control Technology and Applications (CCTA). https://doi.org/10.1109/ccta.2017.8062512 Cobb, M., Barton, K., Fathy, H., & Vermillion, C. (2017). Iterative learning-based waypoint optimization for repetitive path planning, with application to airborne wind energy systems. 2017 IEEE 56th Annual Conference on Decision and Control (CDC). Presented at the 2017 IEEE 56th Annual Conference on Decision and Control (CDC). https://doi.org/10.1109/cdc.2017.8264051 Srinivasan, S., Ekkad, S. V., & Tolpadi, A. (2017). Heat Transfer Measurements inside Narrow Channels with Ribs and Trenches. Heat Transfer Engineering, 39(9), 750–759. https://doi.org/10.1080/01457632.2017.1341198 Boulanger, A., Hutchinson, J., Ng, W. F., Ekkad, S. V., Keefe, M. J., Xu, W., … Hsu, K. (2017). Experimental investigation of the onset of sand deposits on Hastelloy-X between 1,000°C and 1,100°C. The Aeronautical Journal, 121(1242), 1187–1199. https://doi.org/10.1017/AER.2017.48 Ma, T., Lu, X., Pandit, J., Ekkad, S. V., Huxtable, S. T., Deshpande, S., & Wang, Q.-wang. (2017). Numerical study on thermoelectric–hydraulic performance of a thermoelectric power generator with a plate-fin heat exchanger with longitudinal vortex generators. Applied Energy, 185, 1343–1354. https://doi.org/10.1016/J.APENERGY.2016.01.078 Sun, K., Xie, P., Wang, Z., Su, T., Shao, Q., Ryu, J. E., … Guo, Z. (2017). Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity. Polymer, 125, 50–57. https://doi.org/10.1016/j.polymer.2017.07.083 Cheng, C., Fan, R., Wang, Z., Shao, Q., Guo, X., Xie, P., … Guo, Z. (2017). Tunable and weakly negative permittivity in carbon/silicon nitride composites with different carbonizing temperatures. Carbon, 125, 103–112. https://doi.org/10.1016/j.carbon.2017.09.037 Shankar, A., Salcedo, E., Berndt, A., Choi, D., & Ryu, J. E. (2017). Pulsed light sintering of silver nanoparticles for large deformation of printed stretchable electronics. Advanced Composites and Hybrid Materials, 1(1), 193–198. https://doi.org/10.1007/s42114-017-0012-3 Ji, Y., Singh, P., Ekkad, S. V., & Zang, S. (2017). Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition. Numerical Heat Transfer, Part A: Applications, 72(8), 579–599. https://doi.org/10.1080/10407782.2017.1394136 Ravi, B. V., Singh, P., & Ekkad, S. V. (2017). Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels. International Journal of Thermal Sciences, 112, 31–43. https://doi.org/10.1016/J.IJTHERMALSCI.2016.09.034 Damley-Strnad, A., Fittipaldi, M., Morales, B., & Grace, L. R. (2017). The effect of lipid absorption on the mechanical properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications. Presented at the PROCEEDINGS OF PPS-32: The 32nd International Conference of the Polymer Processing Society - Conference Papers. https://doi.org/10.1063/1.5016760 Edwin, L., Mazzoleni, A., Gemmer, T., & Ferguson, S. (2017). Modeling, construction and experimental validation of actuated rolling dynamics of the cylindrical Transforming Roving-Rolling Explorer (TRREx). Acta Astronautica, 132, 43–53. https://doi.org/10.1016/J.ACTAASTRO.2016.11.006 Pang, H., Lowrie, J., & Ngaile, G. (2017). Development of a Non-isothermal Forging Process for Hollow Axle Shafts. Procedia Engineering, 207, 454–459. https://doi.org/10.1016/J.PROENG.2017.10.804 Lowrie, J., & Ngaile, G. (2017). Analytical modeling of hydrodynamic lubrication in a multiple-reduction drawing die. Journal of Manufacturing Processes, 27, 291–303. https://doi.org/10.1016/J.JMAPRO.2017.05.003 Hubbard, A. M., Mailen, R. W., Zikry, M. A., Dickey, M. D., & Genzer, J. (2017). Controllable curvature from planar polymer sheets in response to light. Soft Matter, 13(12), 2299–2308. https://doi.org/10.1039/C7SM00088J Kolanjiyil, A. V., Kleinstreuer, C., & Sadikot, R. T. (2017). Computationally efficient analysis of particle transport and deposition in a human whole-lung-airway model. Part II: Dry powder inhaler application. Computers in Biology and Medicine, 84, 247–253. https://doi.org/10.1016/J.COMPBIOMED.2016.10.025 Di, J., Yu, J., Wang, Q., Yao, S., Suo, D., Ye, Y., … Gu, Z. (2017). Ultrasound-triggered noninvasive regulation of blood glucose levels using microgels integrated with insulin nanocapsules. Nano Research, 10(4), 1393–1402. https://doi.org/10.1007/S12274-017-1500-Z Marx, J., & Rabiei, A. (2017). Overview of Composite Metal Foams and Their Properties and Performance. Advanced Engineering Materials, 19(11), 1600776. https://doi.org/10.1002/adem.201600776 Jiang, F., Zhao, J., Kota, A. K., Xi, N., Mutka, M. W., & Xiao, L. (2017). A Miniature Water Surface Jumping Robot. IEEE Robotics and Automation Letters, 2(3), 1272–1279. https://doi.org/10.1109/lra.2017.2662738 Wang, W., Salazar, J., Vahabi, H., Joshi-Imre, A., Voit, W. E., & Kota, A. K. (2017). Metamorphic Superomniphobic Surfaces. Advanced Materials, 29(27), 1700295. https://doi.org/10.1002/adma.201700295 Vahabi, H., Wang, W., Popat, K. C., Kwon, G., Holland, T. B., & Kota, A. K. (2017). Metallic superhydrophobic surfaces via thermal sensitization. Applied Physics Letters, 110(25), 251602. https://doi.org/10.1063/1.4989577 Bartlet, K., Movafaghi, S., Kota, A., & Popat, K. C. (2017). Superhemophobic titania nanotube array surfaces for blood contacting medical devices. RSC Advances, 7(56), 35466–35476. https://doi.org/10.1039/c7ra03373g Pendurthi, A., Movafaghi, S., Wang, W., Shadman, S., Yalin, A. P., & Kota, A. K. (2017). Fabrication of Nanostructured Omniphobic and Superomniphobic Surfaces with Inexpensive CO2 Laser Engraver. ACS Applied Materials & Interfaces, 9(31), 25656–25661. https://doi.org/10.1021/acsami.7b06924 Vahabi, H., Wang, W., Davies, S., Mabry, J. M., & Kota, A. K. (2017). Coalescence-Induced Self-Propulsion of Droplets on Superomniphobic Surfaces. ACS Applied Materials & Interfaces, 9(34), 29328–29336. https://doi.org/10.1021/acsami.7b09344 Wu, X., Pankow, M., Shadow Huang, H.-Y., & Peters, K. (2017). High-speed polarized light microscopy for in situ, dynamic measurement of birefringence properties. Measurement Science and Technology, 29(1), 015203. https://doi.org/10.1088/1361-6501/aa9084 Myers, A. C., & Jur, J. S. (2017). Effects of thermal energy harvesting on the human - Clothing - environment microsystem. IOP Conference Series: Materials Science and Engineering, 254(7). https://doi.org/10.1088/1757-899X/254/7/072015 Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). A Wearable Hydration Sensor with Conformal Nanowire Electrodes. Advanced Healthcare Materials, 6(6), 1601159. https://doi.org/10.1002/ADHM.201601159 Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na2SO4 + V2O5). Corrosion Science, 115, 56–67. https://doi.org/10.1016/j.corsci.2016.11.011 Qiao, Y., Liu, J., Jia, Y., Xu, C., An, L., & Bai, Y. (2017). Study on coexistence of brittle and ductile fractures in nano reinforcement composites under different loading conditions. International Journal of Fracture, 204(2), 205–224. https://doi.org/10.1007/s10704-016-0174-y Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of chip morphology and chip formation mechanism during machining of magnesium-based metal matrix composites. ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 2. https://doi.org/10.1115/MSEC2017-3052 Davis, B., Dabrow, D., Ju, L., Li, A., Xu, C., & Huang, Y. (2017). Study of Chip Morphology and Chip Formation Mechanism during Machining of Magnesium-Based Metal Matrix Composites. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(9). https://doi.org/10.1115/1.4037182 Shin, Y. C., & Xu, C. (2017). Intelligent systems: Modeling, optimization, and control. In Intelligent Systems: Modeling, Optimization, and Control (pp. 1–433). https://doi.org/10.1201/9781420051773 Fan, Z., Wang, K., Dong, X., Wang, R., Duan, W., Mei, X., … Xu, C. (2017). Enhanced cyclic oxidation resistance through the self-healing of segmented cracks using nano-Al2O3/Ni-20 wt%Al particles in laser re-melted thermal barrier coatings. Materials Letters, 201, 156–160. https://doi.org/10.1016/j.matlet.2017.04.116 Xu, C., & Daniel, J. (2017). Wireless Temperature Measurement Based on Radio Frequency (RF) Technology. Presented at the 40th Annual Conference on Composites, Materials, and Structures, Cocoa beach, FL. Xu, C., Ajayi, T., & Morales, J. (2017). Thermal and Oxidation Stability of BNNT and BNNT Composites. Presented at the NASA Langley. Daniel, J., Ju, L., Yang, J., Sun, X., Gupta, N., Schrand, A., & Xu, C. (2017). Pearl-Chain Formation of Discontinuous Carbon Fiber Under Electrical Field. Journal of Manufacturing and Materials Processing, 1(2), 22. https://doi.org/10.3390/jmmp1020022 Xu, C., & Peebles, J. (2017). Non-Destructive Testing of Composite Materials at High Temperature (2000oC). Presented at the Material Measurements Working Group, Dayton, OH. Macdonald, J., & Xu, C. (2017). Metamaterial Enabling RF Transparency – Ceramic Composite Design for High Temperature Application. Presented at the National Space and Missile Materials Symposium, CA. Xu, C., & Wang, K. (2017). Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics. Pittsburgh, PA: Materials Science & Technology. Chang, W. Y., Zhang, X. A., Kim, J., Huang, W. B., Chang, C. H., & Jiang, X. N. (2017). Photoacoustic transduction efficiency evaluation of candle soot nanoparticles/PDMS composites. 2017 ieee 17th international conference on nanotechnology (ieee-nano), 439–442. https://doi.org/10.1109/nano.2017.8117338 Jiang, X., Li, S., Kim, J., & Ma, J. (2017). High frequency piezo-composite micromachined ultrasound transducer array technology for biomedical imaging. https://doi.org/10.1115/1.860441 Jasper, W. J., & Rasipuram, S. C. (2017). Plasma textiles as fibrous filter media. FIBROUS FILTER MEDIA, pp. 191–210. https://doi.org/10.1016/b978-0-08-100573-6.00011-3 Liu, Y., Rollins, C., Dinh, N., & Luo, H. (2017). Sensitivity analysis of interfacial momentum closure terms in two phase flow and boiling simulations using MCFD solver. Proceedings of the ASME Summer Heat Transfer Conference, 2017, vol 2. https://doi.org/10.1115/ht2017-4963 Zilberter, I. A., Edwards, J. R., & Wittich, D. J., III. (2017). Numerical Simulation of Aero-Optical Effects in a Supersonic Cavity Flow. AIAA JOURNAL, 55(9), 3095–3108. https://doi.org/10.2514/1.j055402 Pritchard, E., Mackey, L., Zhu, D., Gregory, D., & Norris, G. (2017). Modular electric generator rapid deployment DC microgrid. 2017 IEEE Second International Conference on DC Microgrids (ICDCM), 106–110. https://doi.org/10.1109/icdcm.2017.8001030 White, S., & Ferguson, S. (2017). Exploring architecture selection and system evolvability. Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 2b. https://doi.org/10.1115/detc2017-68290 Long, D., & Ferguson, S. (2017). A case study of evolvability and excess on the B-52 stratofortress and FA-18 hornet. Proceedings of the asme international design engineering technical conferences and computers and information in engineering conference, 2017, vol 4. https://doi.org/10.1115/detc2017-68287 Wu, J., Zheng, X., Hu, J., Zhang, Y., & Yuan, F.-G. (2017). Study on Random Decrement Signature Under Different Triggering Level and Length of Time History. TOPICS IN MODAL ANALYSIS & TESTING, VOL 10, pp. 159–166. https://doi.org/10.1007/978-3-319-54810-4_17 Santago, A. C., II, Vidt, M. E., Li, X., Tuohy, C. J., Poehling, G. G., Freehill, M. T., & Saul, K. R. (2017). Shoulder Strength Requirements for Upper Limb Functional Tasks: Do Age and Rotator Cuff Tear Status Matter? JOURNAL OF APPLIED BIOMECHANICS, 33(6), 446–452. https://doi.org/10.1123/jab.2016-0116 Gamzina, D., Luhmann, N. C., Ledford, C., Horn, T., Karakaut, I., Lin, L., & Frigola, P. (2017). Additive vacuum electronics electron beam melting of copper. 2017 eighteenth international vacuum electronics conference (ivec). https://doi.org/10.1109/ivec.2017.8289495 Kuznetsov, I. A., & Kuznetsov, A. V. (2017). How dense core vesicles are delivered to axon terminals - a review of modeling approaches. Modeling of Microscale Transport in Biological Processes, 335–352. Yuan, C. Z., Wu, F., & Duan, C. (2017). Cooperative output regulation of multi-agent systems with switched leader dynamics via smooth switching. Proceedings of the ASME 10th Annual Dynamic Systems and Control Conference, 2017, vol 2. https://doi.org/10.1115/dscc2017-5055 Hollar, S., Brain, M., Nayak, A. A., Stevens, A., Patil, N., Mittal, H., & Smith, W. J. (2017). A New low cost, efficient, self-driving personal rapid transit system. 2017 28th ieee intelligent vehicles symposium (iv 2017), 412–417. https://doi.org/10.1109/ivs.2017.7995753 Guo, Y., Li, Y., Awartani, O., Han, H., Zhang, G., Ade, H., … Zhao, D. (2017). Side-chain engineering of perylenediimide-vinylene polymer acceptors for high-performance all-polymer solar cells. MATERIALS CHEMISTRY FRONTIERS, 1(7), 1362–1368. https://doi.org/10.1039/c6qm00355a Moshonas, N., Stathopoulos, N. A., O'Connor, B. T., Bedeloglu, A. C., Savaidis, S. P., & Vasiliadis, S. (2017). Optical modeling of fiber organic photovoltaic structures using a transmission line method. APPLIED OPTICS, 56(34), 9351–9358. https://doi.org/10.1364/ao.56.009351 She, G.-L., Yuan, F.-G., Ren, Y.-R., & Xiao, W.-S. (2017). On buckling and postbuckling behavior of nanotubes. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 121, 130–142. https://doi.org/10.1016/j.ijengsci.2017.09.005 Yang, R., Sen, P., O'Connor, B. T., & Kudenov, M. W. (2017). Intrinsic coincident full-Stokes polarimeter using stacked organic photovoltaics and architectural comparison of polarimeter techniques. POLARIZATION SCIENCE AND REMOTE SENSING VIII, Vol. 10407. https://doi.org/10.1117/12.2273885 McElroy, M. W., Gutkin, R., & Pankow, M. (2017). Interaction of delaminations and matrix cracks in a CFRP plate, Part II: Simulation using an enriched shell finite element model. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 252–262. https://doi.org/10.1016/j.compositesa.2017.10.006 McElroy, M., Jackson, W., Olsson, R., Hellstrom, P., Tsampas, S., & Pankow, M. (2017). Interaction of delaminations and matrix cracks in a CFRP plate, Part I: A test method for model validation. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 103, 314–326. https://doi.org/10.1016/j.compositesa.2017.09.011 Schoenfeld-Tacher, R. M., Horn, T. J., Scheviak, T. A., Royal, K. D., & Hudson, L. C. (2017). Evaluation of 3D Additively Manufactured Canine Brain Models for Teaching Veterinary Neuroanatomy. JOURNAL OF VETERINARY MEDICAL EDUCATION, 44(4), 612–619. https://doi.org/10.3138/jvme.0416-080r Cheng, G., Yin, S., Chang, T.-H., Richter, G., Gao, H., & Zhu, Y. (2017). Anomalous Tensile Detwinning in Twinned Nanowires. PHYSICAL REVIEW LETTERS, 19(25). https://doi.org/10.1103/physrevlett.119.256101 Misenheimer, C. T., & Terry, S. D. (2017). The development of a dynamic single effect, lithium bromide absorption chiller model with enhanced generator fidelity. ENERGY CONVERSION AND MANAGEMENT, 150, 574–587. https://doi.org/10.1016/j.enconman.2017.08.005 Balar, N., Xiong, Y., Ye, L., Li, S., Nevola, D., Dougherty, D. B., … Brendan T. O'Connor. (2017). Role of Polymer Segregation on the Mechanical Behavior of All Polymer Solar Cell Active Layers. ACS APPLIED MATERIALS & INTERFACES, 9(50), 43886–43892. https://doi.org/10.1021/acsami.7b13719 Deng, Y., Ge, H., Tian, Y., Lu, M., & Jing, Y. (2017). Observation of zone folding induced acoustic topological insulators and the role of spin-mixing defects. PHYSICAL REVIEW B, 96(18). https://doi.org/10.1103/physrevb.96.184305 Huang, T.-Y., & Jing, Y. (2017). Investigation of the effective density of arbitrarily shaped plate-type acoustic metamaterials without mass attached. WAVE MOTION, 74, 124–133. https://doi.org/10.1016/j.wavemoti.2017.07.003 Cruz-Teran, C. A., Tiruthani, K., Mischler, A., & Rao, B. M. (2017). Inefficient Ribosomal Skipping Enables Simultaneous Secretion and Display of Proteins in Saccharomyces cerevisiae. ACS SYNTHETIC BIOLOGY, 6(11), 2096–2107. https://doi.org/10.1021/acssynbio.7b00144 Van Hoe, B., Oman, K. G., Van Steenberge, G., Stan, N., Schultz, S. M., & Peters, K. J. (2017). High-Speed Interrogation of Multiplexed Fiber Bragg Gratings With Spectral Distortion. IEEE SENSORS JOURNAL, 17(21), 6941–6947. https://doi.org/10.1109/jsen.2017.2750327 Sharma, M., Deshmukh, P., Kasanaboina, P., Reynolds, C. L., Jr., Liu, Y., & Iyer, S. (2017). Growth of defect-free GaAsSbN axial nanowires via self-catalyzed molecular beam epitaxy. SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 32(12). https://doi.org/10.1088/1361-6641/aa90b0 Stevens, P. R. R. J., Babinsky, H., Manar, F., Mancini, P., Jones, A. R., Nakata, T., … Ol, M. V. (2017, October). Experiments and Computations on the Lift of Accelerating Flat Plates at Incidence. AIAA JOURNAL, Vol. 55, pp. 3255–3265. https://doi.org/10.2514/1.j055323 Zhang, X. A., Chen, Y.-A., Bagal, A., & Chang, C.-H. (2017). Enhanced total internal reflection using low-index nanolattice materials. OPTICS LETTERS, 42(20), 4123–4126. https://doi.org/10.1364/ol.42.004123 Jiang, H., Ren, Y., Gao, B., Xiang, J., & Yuan, F.-G. (2017). Design of novel plug-type triggers for composite square tubes: enhancement of energy-absorption capacity and inducing failure mechanisms. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 131, 113–136. https://doi.org/10.1016/j.ijmecsci.2017.06.050 Waghela, R., & Bryant, M. (2017). Control design for high-fidelity cyber-physical systems with applications to experimental fluid-structure interaction studies. Proceedings of the asme conference on smart materials adaptive. https://doi.org/10.1115/smasis2017-3740 Kaul, N., & Huang, H.-Y. S. (2017). Constitutive modeling of jugular vein-derived venous valve leaflet tissues. Journal of the Mechanical Behavior of Biomedical Materials, 75, 50–57. https://doi.org/10.1016/j.jmbbm.2017.06.037 Harb, M. S., & Yuan, F. G. (2017). Barely visible impact damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(6), 663–673. https://doi.org/10.1177/1475921716678921 Yuan, C., & Wu, F. (2017). Almost output regulation of switched linear dynamics with switched exosignals. INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, 27(16), 3197–3217. https://doi.org/10.1002/rnc.3735 Lowrie, J., Pang, H., & Ngaile, G. (2017). Weight reduction of heavy-duty truck components through hollow geometry and intensive quenching. JOURNAL OF MANUFACTURING PROCESSES, 28, 523–530. https://doi.org/10.1016/j.jmapro.2017.04.021 Owoyele, O., & Echekki, T. (2017). Toward computationally efficient combustion DNS with complex fuels via principal component transport. COMBUSTION THEORY AND MODELLING, 21(4), 770–798. https://doi.org/10.1080/13647830.2017.1296976 Wcisel, D. J., Ota, T., Litman, G. W., & Yoder, J. A. (2017). Spotted Gar and the Evolution of Innate Immune Receptors. JOURNAL OF EXPERIMENTAL ZOOLOGY PART B-MOLECULAR AND DEVELOPMENTAL EVOLUTION, 328(7), 666–684. https://doi.org/10.1002/jez.b.22738 Subbareddy, P. K., Kartha, A., & Candler, G. V. (2017). Scalar conservation and boundedness in simulations of compressible flow. JOURNAL OF COMPUTATIONAL PHYSICS, 348, 827–846. https://doi.org/10.1016/j.jcp.2017.08.001 Flores, M., Mollenhauer, D., Runatunga, V., Beberniss, T., Rapking, D., & Pankow, M. (2017). High-speed 3D digital image correlation of low-velocity impacts on composite plates. COMPOSITES PART B-ENGINEERING, 131, 153–164. https://doi.org/10.1016/j.compositesb.2017.07.078 Watkins, M. F., & Gould, R. D. (2017). Heat transfer to vertical dense granular flows at high operating temperatures. Proceedings of the asme 11th international conference on energy sustainability, 2017. https://doi.org/10.1115/es2017-3272 Liu, Y., Wu, F., & Ban, X. (2017). Dynamic Output Feedback Control for Continuous-Time T-S Fuzzy Systems Using Fuzzy Lyapunov Functions. IEEE TRANSACTIONS ON FUZZY SYSTEMS, 25(5), 1155–1167. https://doi.org/10.1109/tfuzz.2016.2598852 Allen, J. D., Mattson, C. A., Thacker, K. S., & Ferguson, S. M. (2017). Design for excess capability to handle uncertain product requirements in a developing world setting. RESEARCH IN ENGINEERING DESIGN, 28(4), 511–527. https://doi.org/10.1007/s00163-017-0253-8 Kim, H. W., & Yuan, F. G. (2017). Damage Imaging of an Isotropic Plate Using Matching Pursuit Algorithm. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2017, Vol. 10168. https://doi.org/10.1117/12.2258691 Balar, N., & Brendan T. O'Connor. (2017). Correlating Crack Onset Strain and Cohesive Fracture Energy in Polymer Semiconductor Films. MACROMOLECULES, 50(21), 8611–8618. https://doi.org/10.1021/acs.macromol.7b01282 Zelenak, D., & Narayanaswamy, V. (2017). Composition-independent mean temperature measurements in laminar diffusion flames using spectral lineshape information. EXPERIMENTS IN FLUIDS, 58(10). https://doi.org/10.1007/s00348-017-2430-y Chandrasekaran, S., Pankow, M., Peters, K., & Huang, H.-Y. S. (2017). Composition and structure of porcine digital flexor tendon-bone insertion tissues. Journal of Biomedical Materials Research Part A, 105(11), 3050–3058. https://doi.org/10.1002/jbm.a.36162 Patil, V. C., & Ro, P. I. (2017). Comparative assessment of different types of ocean compressed air energy storage systems based on exergy analysis. Proceedings of the ASME Power Conference Joint with ICOPE-17, 2017, vol 2. https://doi.org/10.1115/power-icope2017-3630 Chilamkurti, Y. N., & Gould, R. D. (2017). Characterizing particle-wall contact behavior and fluctuations in gravity-driven dense granular flows in cylindrical tubes using dem. Proceedings of the ASME Power Conference Joint with ICOPE-17, 2017, vol 2. Guo, G., Hackney, D., Pankow, M., & Peters, K. (2017). A spectral profile multiplexed FBG sensor network with application to strain measurement in a Kevlar woven fabric. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2017, Vol. 10168. https://doi.org/10.1117/12.2260114 Wee, J., Hackney, D. A., Bradford, P. D., & Peters, K. (2017). The adhesive effect on ultrasonic Lamb wave detection sensitivity of remotely-bonded fiber Bragg grating sensors. Sensors and smart structures technologies for civil, mechanical, and aerospace systems 2017, 10168. https://doi.org/10.1117/12.2260009 Hoffman, B. C., Mcafee, T., Pazoki, S., Apperson, A., Brendan T. O'Connor, & Dougherty, D. B. (2017). Temperature controlled interlayer disorder in ultrathin films of alpha-sexithiophene. THIN SOLID FILMS, 642, 182–187. https://doi.org/10.1016/j.tsf.2017.09.011 Cui, J., Adams, J. G. M., & Zhu, Y. (2017). Pop-up assembly of 3D structures actuated by heat shrinkable polymers. SMART MATERIALS AND STRUCTURES, 26(12). https://doi.org/10.1088/1361-665x/aa9552 Ke, J., & Edwards, J. R. (2017). Numerical Simulations of Turbulent Flow over Airfoils Near and During Static Stall. JOURNAL OF AIRCRAFT, 54(5), 1960–1978. https://doi.org/10.2514/1.c034186 Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Mechanisms of signal coupling to optical fiber for FBG sensor detection of Lamb waves. 2017 25TH INTERNATIONAL CONFERENCE ON OPTICAL FIBER SENSORS (OFS), Vol. 10323. https://doi.org/10.1117/12.2263278 Bokhart, M. T., Manni, J., Garrard, K. P., Ekelof, M., Nazari, M., & Muddiman, D. C. (2017). IR-MALDESI Mass Spectrometry Imaging at 50 Micron Spatial Resolution. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 28(10), 2099–2107. https://doi.org/10.1007/s13361-017-1740-x Wells, B., Kumar, R., Reynolds, C. L., Jr., Peters, K., & Bradford, P. D. (2017). Highly anisotropic magneto-transport and field orientation dependent oscillations in aligned carbon nanotube/epoxy composites. APPLIED PHYSICS LETTERS, 111(26). https://doi.org/10.1063/1.4999503 Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. (2017). Effects of thermo-mechanical behavior and hinge geometry on folding response of shape memory polymer sheets. JOURNAL OF APPLIED PHYSICS, 122(19). https://doi.org/10.1063/1.5000040 Jing, W., Wu, Z., Roberts, W. L., & Fang, T. (2017). Effects of Fuel Quantity on Soot Formation Process for Biomass-Based Renewable Diesel Fuel Combustion. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 139(10). https://doi.org/10.1115/1.4036292 Yuan, C., & Wu, F. (2017). Consensus for multi-agent systems with time-varying input delays. INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 48(14), 2956–2966. https://doi.org/10.1080/00207721.2017.1363927 Kolanjiyil, A. V., & Kleinstreuer, C. (2017). Computational analysis of aerosol-dynamics in a human whole-lung airway model. JOURNAL OF AEROSOL SCIENCE, 114, 301–316. https://doi.org/10.1016/j.jaerosci.2017.10.001 Huang, H.-Y. S., & Lu, J. (2017). Biaxial mechanical properties of bovine jugular venous valve leaflet tissues. Biomechanics and Modeling in Mechanobiology, 16(6), 1911–1923. https://doi.org/10.1007/s10237-017-0927-1 Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Using Resampling Residuals for Estimating Confidence Intervals of the Effective Viscosity and Forchheimer Coefficient. TRANSPORT IN POROUS MEDIA, 119(2), 451–459. https://doi.org/10.1007/s11242-017-0892-2 Gemmer, T., Yoder, C. D., Reedy, J., & Mazzoleni, A. P. (2017, September). Tether enabled spacecraft systems for ultra long wavelength radio astronomy. ACTA ASTRONAUTICA, Vol. 138, pp. 530–535. https://doi.org/10.1016/j.actaastro.2016.11.009 Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Simulating tubulin-associated unit transport in an axon: using bootstrapping for estimating confidence intervals of best-fit parameter values obtained from indirect experimental data. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 473(2201). https://doi.org/10.1098/rspa.2017.0045 Banks, H. T., Bekele-Maxwell, K., Bociu, L., Noorman, M., & Guidoboni, G. (2017). SENSITIVITY ANALYSIS IN PORO-ELASTIC AND PORO-VISCO-ELASTIC MODELS WITH RESPECT TO BOUNDARY DATA. QUARTERLY OF APPLIED MATHEMATICS, 75(4), 697–735. https://doi.org/10.1090/qam/1475 Kim, T., Saini, A., Kim, J., Gopalarathnam, A., Zhu, Y., Palmieri, F. L., … Jiang, X. (2017). Piezoelectric Floating Element Shear Stress Sensor for the Wind Tunnel Flow Measurement. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 64(9), 7304–7312. https://doi.org/10.1109/tie.2016.2630670 Tippens, J., Bagal, A., Zhang, X. A., & Chang, C.-H. (2017). Nanostructured antireflective in-plane solar harvester. OPTICS EXPRESS, 25(16), A840–A850. https://doi.org/10.1364/oe.25.00a840 Kingsbury, R. S., Liu, F., Zhu, S., Boggs, C., Armstrong, M. D., Call, D. F., & Coronell, O. (2017). Impact of natural organic matter and inorganic solutes on energy recovery from five real salinity gradients using reverse electrodialysis. JOURNAL OF MEMBRANE SCIENCE, 541, 621–632. https://doi.org/10.1016/j.memsci.2017.07.038 Kim, J., Lindsey, B. D., Li, S., Dayton, P. A., & Jiang, X. (2017). Dual-Frequency Transducer with a Wideband PVDF Receiver for Contrast-Enhanced, Adjustable Harmonic Imaging. HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2017, Vol. 10170. https://doi.org/10.1117/12.2258571 Jiang, Z. H., Cui, Z., Yue, T., Zhu, Y., & Werner, D. H. (2017). Compact, Highly Efficient, and Fully Flexible Circularly Polarized Antenna Enabled by Silver Nanowires for Wireless Body-Area Networks. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, 11(4), 920–932. https://doi.org/10.1109/tbcas.2017.2671841 Li, Y., Shen, C., Xie, Y., Li, J., Wang, W., Cummer, S. A., & Jing, Y. (2017). Tunable Asymmetric Transmission via Lossy Acoustic Metasurfaces. PHYSICAL REVIEW LETTERS, 119(3). https://doi.org/10.1103/physrevlett.119.035501 Nagai, H., Poteet, A., Zhang, X. A., & Chang, C.-H. (2017). Three-dimensional colloidal interference lithography. Nanotechnology, 28(12), 125302. https://doi.org/10.1088/1361-6528/aa5e3f Chen, S., Yao, H., Li, Z., Awartani, O. M., Liu, Y., Wang, Z., … Yan, H. (2017). Surprising Effects upon Inserting Benzene Units into a Quaterthiophene-Based D-A Polymer-Improving Non-Fullerene Organic Solar Cells via Donor Polymer Design. ADVANCED ENERGY MATERIALS, 7(12). https://doi.org/10.1002/aenm.201602304 Bagal, A., Zhang, X. A., Shahrin, R., Dandley, E. C., Zhao, J., Poblete, F. R., … Chang, C.-H. (2017). Large-Area Nanolattice Film with Enhanced Modulus, Hardness, and Energy Dissipation. Scientific Reports, 7(1). https://doi.org/10.1038/S41598-017-09521-6 MacLeod, M., & Bryant, M. (2017). Dynamic Modeling, Analysis, and Testing of a Variable Buoyancy System for Unmanned Multidomain Vehicles. IEEE JOURNAL OF OCEANIC ENGINEERING, 42(3), 511–521. https://doi.org/10.1109/joe.2016.2586802 Lindsey, B. D., Kim, J., Dayton, P. A., & Jiang, X. (2017). Dual-Frequency Piezoelectric Endoscopic Transducer for Imaging Vascular Invasion in Pancreatic Cancer. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 64(7), 1078–1086. https://doi.org/10.1109/tuffc.2017.2702010 Foss, J., Peters, K., & Yang, W. (2017, July). Announcing the 2016 Measurement Science and Technology Outstanding Paper Awards. MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 28. https://doi.org/10.1088/1361-6501/aa726e Nejadkhaki, H. K., Lall, A., & Hall, J. F. (2017). A Methodology to Synthesize Gearbox and Control Design for Increased Power Production and Blade Root Stress Mitigation in a Small Wind Turbine. JOURNAL OF MECHANICAL DESIGN, 139(8). https://doi.org/10.1115/1.4036998 Kim, T., Kim, J., & Jiang, X. (2017). Transit Time Difference Flowmeter for Intravenous Flow Rate Measurement Using 1-3 Piezoelectric Composite Transducers. IEEE SENSORS JOURNAL, 17(17), 5741–5748. https://doi.org/10.1109/jsen.2017.2727340 Kim, J.-H., Gadisa, A., Schaefer, C., Yao, H., Gautam, B. R., Balar, N., … Ade, H. (2017). Strong polymer molecular weight-dependent material interactions: impact on the formation of the polymer/fullerene bulk heterojunction morphology. JOURNAL OF MATERIALS CHEMISTRY A, 5(25), 13176–13188. https://doi.org/10.1039/c7ta03052e Chen, M., Steer, M. B., & Zikry, M. (2017). Significance of randomness in establishing hotspots in crystals. Southeastcon 2017. https://doi.org/10.1109/secon.2017.7925394 Ye, L., Xiong, Y., Li, S., Ghasemi, M., Balar, N., Turner, J., … Ade, H. (2017). Precise Manipulation of Multilength Scale Morphology and Its Influence on Eco-Friendly Printed All-Polymer Solar Cells. ADVANCED FUNCTIONAL MATERIALS, 27(33). https://doi.org/10.1002/adfm.201702016 He, J., & Yuan, F.-G. (2017). Lamb Wave-based BVID Imaging for a Curved Composite Sandwich Panel. 43RD REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, Vol. 1806. https://doi.org/10.1063/1.4974606 Kim, J., Lindsey, B. D., Chang, W.-Y., Dai, X., Stavas, J. M., Dayton, P. A., & Jiang, X. (2017). Intravascular forward-looking ultrasound transducers for microbubble-mediated sonothrombolysis. SCIENTIFIC REPORTS, 7. https://doi.org/10.1038/s41598-017-03492-4 Govind, B. (2017). Increasing the operational capability of a horizontal axis wind turbine by its integration with a vertical axis wind turbine. APPLIED ENERGY, 199, 479–494. https://doi.org/10.1016/j.apenergy.2017.04.070 Kim, T., Kim, J., & Jiang, X. (2017). High temperature transducer using aluminum nitride single crystal for laser ultrasound detection. NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2017, Vol. 10169. https://doi.org/10.1117/12.2259975 Wee, J., Hackney, D., Bradford, P., & Peters, K. (2017). Bi-directional ultrasonic wave coupling to FBGs in continuously bonded optical fiber sensing. APPLIED OPTICS, 56(25), 7262–7268. https://doi.org/10.1364/ao.56.007262 Bhaskaran, H. S., Ro, P., Park, J.-K., & Ramakrishnan, K. R. (2017). Analysis of a Novel Technique for Temperature Rise Abatement in Liquid Piston Compressors-External Gas Injection. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 9(2). https://doi.org/10.1115/1.4035969 Akinwande, D., Brennan, C. J., Bunch, J. S., Egberts, P., Felts, J. R., Gao, H., … Zhu, Y. (2017). [Review of A review on mechanics and mechanical properties of 2D materials-Graphene and beyond]. EXTREME MECHANICS LETTERS, 13, 42–77. https://doi.org/10.1016/j.eml.2017.01.008 Liu, B., Lu, T., Wang, B., Liu, J., Nakayama, T., Zhou, J., & Li, B. (2017). Thermoelectric transport in hybrid materials incorporating metallic nanowires in polymer matrix. APPLIED PHYSICS LETTERS, 110(11). https://doi.org/10.1063/1.4978602 She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory. APPLIED MATHEMATICAL MODELLING, 47, 340–357. https://doi.org/10.1016/j.apm.2017.03.014 Durham, J. W., III, Allen, M. J., & Rabiei, A. (2017). Preparation, characterization and in vitro response of bioactive coatings on polyether ether ketone. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 105(3), 560–567. https://doi.org/10.1002/jbm.b.33578 Du, H., Mohanty, K., & Mullera, M. (2017). Microstructural characterization of trabecular bone using ultrasonic backscattering and diffusion parameters. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 141(5), EL445–EL451. https://doi.org/10.1121/1.4982824 Bond, D. M., & Zikry, M. A. (2017). Microstructural Modeling of Intergranular Fracture in Tricrystals With Random Low- and High-Angle Grain Boundaries. JOM, 69(5), 856–862. https://doi.org/10.1007/s11837-017-2291-0 He, J., & Yuan, F.-G. (2017). Lamb-wave-based two-dimensional areal scan damage imaging using reverse-time migration with a normalized zero-lag cross-correlation imaging condition. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(4), 444–457. https://doi.org/10.1177/1475921716674373 Guo, G., Hackney, D., Pankow, M., & Peters, K. (2017). Interrogation of a spectral profile division multiplexed FBG sensor network using a modified particle swarm optimization method. MEASUREMENT SCIENCE AND TECHNOLOGY, 28(5). https://doi.org/10.1088/1361-6501/aa637f Guo, Y., Li, Y., Awartani, O., Han, H., Zhao, J., Ade, H., … Zhao, D. (2017). Improved Performance of All-Polymer Solar Cells Enabled by Naphthodiperylenetetraimide-Based Polymer Acceptor. ADVANCED MATERIALS, 29(26). https://doi.org/10.1002/adma.201700309 Ye, L., Zhao, W., Li, S., Mukherjee, S., Carpenter, J. H., Awartani, O., … Ade, H. (2017). High-Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi-Length Scale Morphology and Device Performance. ADVANCED ENERGY MATERIALS, 7(7). https://doi.org/10.1002/aenm.201602000 Mailen, R. W., Dickey, M. D., Genzer, J., & Zikry, M. A. (2017). A fully coupled thermo-viscoelastic finite element model for self-folding shape memory polymer sheets. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 55(16), 1207–1219. https://doi.org/10.1002/polb.24372 Zhu, Y., Fan, X., Liang, B., Cheng, J., & Jing, Y. (2017). Ultrathin Acoustic Metasurface-Based Schroeder Diffuser. PHYSICAL REVIEW X, 7(2). https://doi.org/10.1103/physrevx.7.021034 Oduola, W. O., Li, X., Duan, C., Qian, L., Wu, F., & Dougherty, E. R. (2017). Time-Based Switching Control of Genetic Regulatory Networks: Toward Sequential Drug Intake for Cancer Therapy. CANCER INFORMATICS, 16. https://doi.org/10.1177/1176935117706888 Allred, C. J., Churchill, D., & Buckner, G. D. (2017). Real-time estimation of helicopter rotor blade kinematics through measurement of rotation induced acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 91, 183–197. https://doi.org/10.1016/j.ymssp.2017.01.003 Sang, S., Yuan, Z., Zheng, L., Sun, E., Qi, X., Zhang, R., … Du, J. (2017). Raman spectra of (K, Na)(Nb,Ta)O-3 single crystal. JOURNAL OF ALLOYS AND COMPOUNDS, 704, 804–808. https://doi.org/10.1016/j.jallcom.2016.12.166 Choi, S., & Saveliev, A. V. (2017). Oscillatory coalescence of droplets in an alternating electric field. PHYSICAL REVIEW FLUIDS, 2(6). https://doi.org/10.1103/physrevfluids.2.063603 Crouch, D. L., & Huang, H. (2017). Musculoskeletal model-based control interface mimics physiologic hand dynamics during path tracing task. JOURNAL OF NEURAL ENGINEERING, 14(3). https://doi.org/10.1088/1741-2552/aa61bc Hudson, T. B., Hou, T.-H., Grimsley, B. W., & Yuan, F.-G. (2017). Imaging of local porosity/voids using a fully non-contact air-coupled transducer and laser Doppler vibrometer system. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(2), 164–173. https://doi.org/10.1177/1475921716668843 Huang, S. J., Kim, T., Hou, D., Cann, D., Jones, J. L., & Jiang, X. N. (2017). Flexoelectric characterization of BaTiO3-0.08Bi(Zn1/2Ti1/2)O-3. Applied Physics Letters, 110(22). Yu, H., Chung, C.-C., Shewmon, N., Ho, S., Carpenter, J. H., Larrabee, R., … So, F. (2017). Flexible Inorganic Ferroelectric Thin Films for Nonvolatile Memory Devices. Advanced Functional Materials, 27(21), 1700461. https://doi.org/10.1002/ADFM.201700461 Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9 Bond, D. M., & Zikry, M. A. (2017). A Predictive Framework for Dislocation-Density Pile-Ups in Crystalline Systems With Coincident Site Lattice and Random Grain Boundaries. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(2). https://doi.org/10.1115/1.4035494 Echekki, T., & Ahmed, S. F. (2017). Turbulence effects on the autoignition of DME in a turbulent co-flowing jet. COMBUSTION AND FLAME, 178, 70–81. https://doi.org/10.1016/j.combustflame.2016.12.022 Forster, J. D., Lynch, J. J., Coates, N. E., Liu, J., Jang, H., Zaia, E., … Urban, J. J. (2017). Solution-Processed Cu2Se Nanocrystal Films with Bulk-Like Thermoelectric Performance. SCIENTIFIC REPORTS, 7. https://doi.org/10.1038/s41598-017-02944-1 Wee, J., Hackney, D. A., Bradford, P. D., & Peters, K. J. (2017). Simulating increased Lamb wave detection sensitivity of surface bonded fiber Bragg grating. SMART MATERIALS AND STRUCTURES, 26(4). https://doi.org/10.1088/1361-665x/aa646b Leser, P. E., Hochhalter, J. D., Warner, J. E., Newman, J. A., Leser, W. P., Wawrzynek, P. A., & Yuan, F.-G. (2017). Probabilistic fatigue damage prognosis using surrogate models trained via three-dimensional finite element analysis. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(3), 291–308. https://doi.org/10.1177/1475921716643298 Soltmann, L. M., & Hall, C. E., Jr. (2017). Power-Required Flight Testing of Unmanned Aerial Systems Using Non-Steady-State Flight. JOURNAL OF AIRCRAFT, 54(3), 1162–1171. https://doi.org/10.2514/1.c033982 Srivastava, S., & Echekki, T. (2017). PARTICLE-FILTER BASED UPSCALING FOR TURBULENT REACTING FLOW SIMULATIONS. INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, 15(1), 1–17. https://doi.org/10.1615/intjmultcompeng.2017017084 Zhao, B., & Zikry, M. A. (2017). Oxidation-induced failure in semi-crystalline organic thin films. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 109, 72–83. https://doi.org/10.1016/j.ijsolstr.2017.01.008 Xu, W., Zhang, Y., Cheng, G., Mathaudhu, S. N., Scattergood, R. O., Koch, C. C., … Zhu, Y. (2017). On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium. ACTA MATERIALIA, 131, 457–466. https://doi.org/10.1016/j.actamat.2017.04.015 Chen, X., Feng, Y., Zhong, W., & Kleinstreuer, C. (2017). Numerical investigation of the interaction, transport and deposition of multicomponent droplets in a simple mouth-throat model. JOURNAL OF AEROSOL SCIENCE, 105, 108–127. https://doi.org/10.1016/j.jaerosci.2016.12.001 She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Nonlinear analysis of bending, thermal buckling and post-buckling for functionally graded tubes by using a refined beam theory. COMPOSITE STRUCTURES, 165, 74–82. https://doi.org/10.1016/j.compstruct.2017.01.013 Rui, X., Zhang, C., Wang, S., & Wu, F. (2017, March 16). New Developments in Multibody System Dynamics and Its Applications 2015. ADVANCES IN MECHANICAL ENGINEERING, Vol. 9. https://doi.org/10.1177/1687814017695685 Fittipaldi, M., & Grace, L. R. (2017). Lipid-induced degradation in biocompatible poly(Styrene-Isobutylene-Styrene) (SIBS) thermoplastic elastomer. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 68, 80–87. https://doi.org/10.1016/j.jmbbm.2017.01.031 Myers, A., Hodges, R., & Jur, J. S. (2017). Human and environmental analysis of wearable thermal energy harvesting. ENERGY CONVERSION AND MANAGEMENT, 143, 218–226. https://doi.org/10.1016/j.enconman.2017.04.002 Yuan, C., & Wu, F. (2017). Exact-memory and memoryless control of linear systems with time-varying input delay using dynamic IQCs. AUTOMATICA, 77, 246–253. https://doi.org/10.1016/j.automatica.2016.11.015 Wang, Z., Luo, Y., Zhao, G., & Yuan, F.-G. (2017). Design and optimization of an OPFC ultrasonic linear phased array transducer. INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, 13(1), 57–69. https://doi.org/10.1007/s10999-015-9317-y Cui, J., Yao, S., Huang, Q., Adams, J. G. M., & Zhu, Y. (2017). Controlling the self-folding of a polymer sheet using a local heater: the effect of the polymer-heater interface. SOFT MATTER, 13(21), 3863–3870. https://doi.org/10.1039/c7sm00568g Mohanty, K., Blackwell, J., Egan, T., & Muller, M. (2017). CHARACTERIZATION OF THE LUNG PARENCHYMA USING ULTRASOUND MULTIPLE SCATTERING. ULTRASOUND IN MEDICINE AND BIOLOGY, 43(5), 993–1003. https://doi.org/10.1016/j.ultrasmedbio.2017.01.011 Kundu, P., Echekki, T., Pei, Y., & Som, S. (2017). An equivalent dissipation rate model for capturing history effects in non-premixed flames. COMBUSTION AND FLAME, 176, 202–212. https://doi.org/10.1016/j.combustflame.2016.10.001 Palagummi, S. V., & Yuan, F.-G. (2017). An enhanced performance of a horizontal diamagnetic levitation mechanism-based vibration energy harvester for low frequency applications. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 28(5), 578–594. https://doi.org/10.1177/1045389x16651152 Anand, N., & Gould, R. D. (2017). A convenient low order thermal model for heat transfer characteristics of single floored low-rise residential buildings. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2016, vol. 6b. https://doi.org/10.1115/imece2016-65254 Cheng, J., Liu, X., Liu, T., & Luo, H. (2017). A Parallel, High-Order Direct Discontinuous Galerkin Methods for the Navier-Stokes Equations on 3D Hybrid Grids. COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 21(5), 1231–1257. https://doi.org/10.4208/cicp.oa-2016-0090 Kuznetsov, I. A., & Kuznetsov, A. V. (2017). What mechanisms of tau protein transport could be responsible for the inverted tau concentration gradient in degenerating axons? MATHEMATICAL MEDICINE AND BIOLOGY-A JOURNAL OF THE IMA, 34(1), 125–150. https://doi.org/10.1093/imammb/dqv041 Kuznetsov, I. A., & Kuznetsov, A. V. (2017). Utilization of the bootstrap method for determining confidence intervals of parameters for a model of MAP1B protein transport in axons. JOURNAL OF THEORETICAL BIOLOGY, 419, 350–361. https://doi.org/10.1016/j.jtbi.2017.02.017 Jin, Y., & Kuznetsov, A. V. (2017). Turbulence modeling for flows in wall bounded porous media: An analysis based on direct numerical simulations. PHYSICS OF FLUIDS, 29(4). https://doi.org/10.1063/1.4979062 Yang, T., Wu, F., & Zhang, L. (2017). Tracking control of hybrid systems with state-triggered jumps and stochastic events and its application. IET CONTROL THEORY AND APPLICATIONS, 11(7), 1024–1033. https://doi.org/10.1049/iet-cta.2016.1086 She, G.-L., Yuan, F.-G., & Ren, Y.-R. (2017). Research on nonlinear bending behaviors of FGM infinite cylindrical shallow shells resting on elastic foundations in thermal environments. COMPOSITE STRUCTURES, 170, 111–121. https://doi.org/10.1016/j.compstruct.2017.03.010 Ban, X. J., Liu, Y., Huang, X. L., & Wu, F. (2017). Output feedback control for fuzzy systems subject to actuator saturation based on fuzzy Lyapunov functions. Proceedings of the ASME 9th Annual Dynamic Systems and Control Conference, 2016, Vol 1. https://doi.org/10.1115/dscc2016-9879 Brendan T. O'Connor, Awartani, O. M., & Balar, N. (2017). Morphological considerations of organic electronic films for flexible and stretchable devices. MRS BULLETIN, 42(2), 108–114. https://doi.org/10.1557/mrs.2017.6 Zhu, Y. (2017). [Review of Mechanics of Crystalline Nanowires: An Experimental Perspective]. APPLIED MECHANICS REVIEWS, 69(1). https://doi.org/10.1115/1.4035511 Yao, S., Myers, A., Malhotra, A., Lin, F., Bozkurt, A., Muth, J. F., & Zhu, Y. (2017). Hydration Sensing: A Wearable Hydration Sensor with Conformal Nanowire Electrodes (Adv. Healthcare Mater. 6/2017). Advanced Healthcare Materials, 6(6). https://doi.org/10.1002/ADHM.201770031 Frink, N. T., Murthy, P. C., Atkins, H. L., Viken, S. A., Petrilli, J. L., Gopalarathnam, A., & Paul, R. C. (2017, April). Computational Aerodynamic Modeling Tools for Aircraft Loss of Control. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Vol. 40, pp. 789–803. https://doi.org/10.2514/1.g001736 Liu, X., Xuan, L., Xia, Y., & Luo, H. (2017). A reconstructed discontinuous Galerkin method for the compressible Navier-Stokes equations on three-dimensional hybrid grids. COMPUTERS & FLUIDS, 152, 217–230. https://doi.org/10.1016/j.compfluid.2017.04.027 Li, L., Ngaile, G., & Hassan, T. (2017). A Novel Hybrid Heating Method for Mechanical Testing of Miniature Specimens at Elevated Temperature. JOURNAL OF MICRO AND NANO-MANUFACTURING, 5(2). https://doi.org/10.1115/1.4035954 Nabavi, S., & Chakrabortty, A. (2017). Structured Identification of Reduced-Order Models of Power Systems in a Differential-Algebraic Form. IEEE TRANSACTIONS ON POWER SYSTEMS, 32(1), 198–207. https://doi.org/10.1109/tpwrs.2016.2554154 Andersen, M. E., Modak, N., Winterrowd, C. K., Lee, C. W., Roberts, W. L., Wendt, J. O. L., & Linak, W. P. (2017). Soot, organics, and ultrafine ash from air-and oxy-fired coal combustion. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 36(3), 4029–4037. https://doi.org/10.1016/j.proci.2016.08.073 Sun, T., Scott, J. I., Wang, M., Kline, R. J., Bazan, G. C., & Brendan T. O'Connor. (2017). Plastic Deformation of Polymer Blends as a Means to Achieve Stretchable Organic Transistors. ADVANCED ELECTRONIC MATERIALS, 3(1). https://doi.org/10.1002/aelm.201600388 Suo, D., Jin, Z., Jiang, X., Dayton, P. A., & Jing, Y. (2017). Microbubble mediated dual-frequency high intensity focused ultrasound thrombolysis: An In vitro study. Applied Physics Letters, 110(2), 023703. https://doi.org/10.1063/1.4973857 Li, X.-L., Duan, X., Semenov, Y. G., & Kim, K. W. (2017). Electrical switching of antiferromagnets via strongly spin-orbit coupled materials. JOURNAL OF APPLIED PHYSICS, 121(2). https://doi.org/10.1063/1.4974027 Zheng, Z., Awartani, O. M., Gautam, B., Liu, D., Qin, Y., Li, W., … Hou, J. (2017). Efficient Charge Transfer and Fine-Tuned Energy Level Alignment in a THF- Processed Fullerene- Free Organic Solar Cell with 11.3% Efficiency. ADVANCED MATERIALS, 29(5). https://doi.org/10.1002/adma.201604241 Wang, Z., Martin, K. H., Huang, W., Dayton, P. A., & Jiang, X. (2017). Contrast Enhanced Superharmonic Imaging for Acoustic Angiography Using Reduced Form-Factor Lateral Mode Transmitters for Intravascular and Intracavity Applications. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 64(2), 311–319. https://doi.org/10.1109/tuffc.2016.2619687 Zhang, Y. Q., Yu, J. C., Wang, J. Q., Hanne, N. J., Cui, Z., Qian, C. G., … Gu, Z. (2017). Thrombin-responsive transcutaneous patch for auto-anticoagulant regulation. Advanced Materials, 29(4). https://doi.org/10.1002/adma.201770028 Berik, P., Chang, W.-Y., & Jiang, X. (2017). Piezoelectric d(36) in-plane shear-mode of lead-free BZT-BCT single crystals for torsion actuation. APPLIED PHYSICS LETTERS, 110(5). https://doi.org/10.1063/1.4975587 Ghasemi, M., Ye, L., Zhang, Q., Yan, L., Kim, J.-H., Awartani, O., … Ade, H. (2017). Panchromatic Sequentially Cast Ternary Polymer Solar Cells. ADVANCED MATERIALS, 29(4). https://doi.org/10.1002/adma.201604603 Tu, J. F., Rajule, N., Liu, Y., & Martin, J. (2017). Nanostructure diffraction analysis of a copper/single walled carbon nanotube nanocomposite synthesized by Laser Surface Implanting. CARBON, 113, 1–9. https://doi.org/10.1016/j.carbon.2016.11.004 Shu, L. L., Yong, Z. H., Jiang, X. N., Xie, Z. Q., & Huang, W. B. (2017). Flexoelectricity in low densification materials and its implication. Journal of Alloys and Compounds, 695, 1555–1560. https://doi.org/10.1016/j.jallcom.2016.10.298 Wu, X., Huang, H.-Y. S., Pankow, M., & Peters, K. (2017). Dynamic Polarization Microscopy for In-Situ Measurements of Collagen Fiber Realignment During Impact. MECHANICS OF BIOLOGICAL SYSTEMS AND MATERIALS, VOL 6, pp. 61–66. https://doi.org/10.1007/978-3-319-41351-8_9 Joglekar, S., & Pankow, M. (2017). Modeling of 3D woven composites using the digital element approach for accurate prediction of kinking under compressive loads. COMPOSITE STRUCTURES, 160, 547–559. https://doi.org/10.1016/j.compstruct.2016.10.070 Shu, L., Wan, M., Jiang, X., Li, F., Zhou, N., Huang, W., & Wang, T. (2017). Frequency dispersion of flexoelectricity in PMN-PT single crystal. AIP ADVANCES, 7(1). https://doi.org/10.1063/1.4973684 Joglekar, S., Von Hagel, K., Pankow, M., & Ferguson, S. (2017). Exploring how optimal composite design is influenced by model fidelity and multiple objectives. COMPOSITE STRUCTURES, 160, 964–975. https://doi.org/10.1016/j.compstruct.2016.10.089 Wang, L., Badra, J. A., Roberts, W. L., & Fang, T. (2017). Characteristics of spray from a GDI fuel injector for naphtha and surrogate fuels. FUEL, 190, 113–128. https://doi.org/10.1016/j.fuel.2016.11.015 Farmahini-Farahani, M., Saveliev, A. V., & Merchan-Merchan, W. (2017). Volumetric flame synthesis of mixed tungsten-molybdenum oxide nanostructures. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 36(1), 1055–1063. https://doi.org/10.1016/j.proci.2016.08.054 Yang, Y., Li, B., Chen, Z., Sui, N., Chen, Z., Xu, T., … Jing, Y. (2017). Sound insulation of multi-layer glass-fiber felts: Role of morphology. TEXTILE RESEARCH JOURNAL, 87(3), 261–269. https://doi.org/10.1177/0040517516629142 Yao, S., Cui, J., Cui, Z., & Zhu, Y. (2017). Soft electrothermal actuators using silver nanowire heaters. NANOSCALE, 9(11), 3797–3805. https://doi.org/10.1039/c6nr09270e Misenheimer, C. T., & Terry, S. D. (2017). Modeling Hybrid Nuclear Systems With Chilled-Water Storage. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 139(1). https://doi.org/10.1115/1.4033858 Yang, R., Sen, P., O'Connor, B. T., & Kudenov, M. W. (2017). Intrinsic coincident full-Stokes polarimeter using stacked organic photovoltaics. APPLIED OPTICS, 56(6), 1768–1774. https://doi.org/10.1364/ao.56.001768 Yu, J., Qian, C., Zhang, Y., Cui, Z., Zhu, Y., Shen, Q., … Gu, Z. (2017). Hypoxia and H2O2 Dual-Sensitive Vesicles for Enhanced Glucose-Responsive Insulin Delivery. NANO LETTERS, 17(2), 733–739. https://doi.org/10.1021/acs.nanolett.6b03848 Liu, Y., Ban, X., Wu, F., & Lam, H. K. (2017). Gain-scheduling control of T-S fuzzy systems with actuator saturation. JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 32(3), 2579–2589. https://doi.org/10.3233/jifs-16546 Ming, T., Yang, W., Huang, X., Wu, Y., Li, X., & Liu, J. (2017). Analytical and numerical investigation on a new compact thermoelectric generator. ENERGY CONVERSION AND MANAGEMENT, 132, 261–271. https://doi.org/10.1016/j.enconman.2016.11.043 Ben Rejeb, S., & Echekki, T. (2017). Thermal radiation modeling using the LES-ODT framework for turbulent combustion flows. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 104, 1300–1316. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.074