Mechanical & Aerospace Engineering - 2020

Borek, J., Goelke, B., Earnhardt, C., & Vermillion, C. (2020). Hierarchical Control of Heavy-Duty Trucks Through Signalized Intersections With Non-Deterministic Signal Timing. IEEE Transactions on Intelligent Transportation Systems, 23(8), 13769–13781. https://doi.org/10.1109/TITS.2021.3128068

Tafreshi, H. V. (2020). Understanding Airborne Dust and Droplet Filtration via Multiscale Modeling and Experiment. FiltXpo 2020. Presented at the FiltXpo 2020, Chicago, IL.

Esteves, R. J. A., Gornick, V., Alqurwani, D. S., Koenig-Lovejoy, J., Abdelrazeq, H., Khraisheh, M., … McLeskey, J. T., Jr. (2020). Activated carbon-doped polystyrene fibers for direct contact membrane desalination. Emergent Materials, 3(6), 807–814. https://doi.org/10.1007/s42247-020-00107-z

Yousefi, S. H., & Tafreshi, H. V. (2020). Novel approach to model microstructure of dust-deposits comprised of polydisperse particles of arbitrary shapes. Separation and Purification Technology, 244, 116844. https://doi.org/10.1016/j.seppur.2020.116844

Moghadam, A., & Tafreshi, H. V. (2020). On liquid bridge adhesion to fibrous surfaces under normal and shear forces. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 589, 124473. https://doi.org/10.1016/j.colsurfa.2020.124473

Yousefi, S. H., & Tafreshi, H. V. (2020). Modeling electrospun fibrous structures with embedded spacer particles: Application to aerosol filtration. Separation and Purification Technology, 235, 116184. https://doi.org/10.1016/j.seppur.2019.116184

Abdelrazeq, H., Khraisheh, M., Al Momani, F., McLeskey, J. T., Jr, Hassan, M. K., Gad-el-Hak, M., & Tafreshi, H. V. (2020). Performance of electrospun polystyrene membranes in synthetic produced industrial water using direct-contact membrane distillation. Desalination, 493, 114663. https://doi.org/10.1016/j.desal.2020.114663

Jamali, M., & Tafreshi, H. V. (2020). Measuring Force of Droplet Detachment from Hydrophobic Surfaces via Partial Cloaking with Ferrofluids. Langmuir, 36(22), 6116–6125. https://doi.org/10.1021/acs.langmuir.0c00532

Tu, J. F. (2020). Difficult Engineering Concepts Better Explained. https://doi.org/10.1142/11652

Nantista, C., Gamzina, D., Ledford, C., Horn, T., Carriere, P., & Frigola, P. (2020). Design and Test of Copper Printed RF Cavities. 2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 149–150. https://doi.org/10.1109/IVEC45766.2020.9520624

Ives, L., Bui, T., Marsden, D., Collins, G., Horn, T., Ledford, C., & Neilson, J. (2020). Additive Manufacture of RF Loads for ITER. 2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 143–144. https://doi.org/10.1109/IVEC45766.2020.9520466

Ji, J., Li, D., Li, Y., & Jing, Y. (2020). Low-Frequency Broadband Acoustic Metasurface Absorbing Panels. FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, 6. https://doi.org/10.3389/fmech.2020.586249

Mazzoleni, N., Kim, J. Y., & Bryant, M. (2020). The Effect of Resistive Forces in Variable Recruitment Fluidic Artificial Muscle Bundles: A Configuration Study. BIOINSPIRATION, BIOMIMETICS, AND BIOREPLICATION X, Vol. 11374. https://doi.org/10.1117/12.2557907

Chang, H.-Y., & Yuan, F.-G. (2020, October 6). Visualization of hidden damage from scattered wavefield reconstructed using an integrated high-speed camera system. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, Vol. 10. https://doi.org/10.1177/1475921720940805

Ma, J., & Jiang, X. (2020). Contrast-Enhanced Dual-Frequency Super-Harmonic Intravascular Ultrasound (IVUS) Imaging. MULTIMODALITY IMAGING: FOR INTRAVASCULAR APPLICATION, pp. 105–151. https://doi.org/10.1007/978-981-10-6307-7_5

Reed, J., Cobb, M., Daniels, J., Siddiqui, A., Muglia, M., & Vermillion, C. (2020). Hierarchical Control Design and Performance Assessment of an Ocean Kite in a Turbulent Flow Environment. IFAC PAPERSONLINE, Vol. 53, pp. 12726–12732. https://doi.org/10.1016/j.ifacol.2020.12.1887

Daniels, J., Reed, J., Cobb, M., Siddiqui, A., & Vermillion, C. (2020). Optimal Cyclic Spooling Control for Kite-Based Energy Systems. IFAC PAPERSONLINE, Vol. 53, pp. 12719–12725. https://doi.org/10.1016/j.ifacol.2020.12.1883

Rubio-Hervas, J. R., Gupta, A., Ong, Y.-W., & Reyhanoglu, M. (2020). Pay-per-flight Dynamic Pricing of UAV Operations. Proceedings of the 2020 International Conference on Artificial Intelligence and Data Analytics for Air Transportation (AIDA-AT). Presented at the 2020 International Conference on Artificial Intelligence and Data Analytics for Air Transportation (AIDA-AT), Singapore. https://doi.org/10.1109/AIDA-AT48540.2020.9049171

Marghitu, D., & Perkins, E. (2020). Dynamics of a Linkage Mechanism Using Sample Entropy. In N. Dumitru, N. Craciunoiu, & A. S. Rosca (Eds.), Achievements and solutions in mechanical engineering II : selected, peer reviewed papers from the 5th International Conference of Mechanical Engineering (ICOME) 2019, October 24-25, 2019, Craiova, Romania (pp. 67–74). https://doi.org/10.4028/www.scientific.net/AMM.896.67

Tucker, A., & Perkins, E. (2020). Cover Art. Journal of Acoustical Society of America, 148(1). Retrieved from https://asa.scitation.org/action/showLargeCover?doi=10.1121%2Fjas.2020.148.issue-1

Crifasi, D., Roy, C., & Perkins, E. (2020). Additively Manufactured 2D Truss Demonstration". Presented at the 2020 American Society for Engineering Education Southeast Section Conference, Auburn, AL.

Carpenter, S., Zabala, M., Perkins, E., Larson, J., & Marino, A. (2020). Frequency Characterization of Thigh Soft Tissue Artifact During a Relaxed and Activated State. Presented at the 44th Meeting of the American Society of Biomechanics.

Mollik, T., & Perkins, E. (2020). A Neural NARX Network Controller for a Pneumatic Artificial Muscle Driven Translational System. Presented at the IMECE 2020: American Society of Mechanical Engineers International Mechanical Engineering Congress & Exposition.

Li, X. F., Shougat, M. R. E. U., Fendley, C., Dean, R., & Perkins, E. (2020). Stochastic Response of Hopf Adaptive Frequency Oscillator. 10th European Nonlinear Dynamics Conference. (Accepted).

Sardeshmukh, P. A., Yoder, C. D., Talaski, D. J., & Mazzoleni, A. P. (2020). Mathematical modeling and parametric study of a planar Tumbleweed rover demonstrator. ACTA ASTRONAUTICA, 177, 48–57. https://doi.org/10.1016/j.actaastro.2020.06.035

Weatherall, K. M., Boone, L. H., Caldwell, F. J., Cole, R. C., Cattley, R. C., Lascola, K. M., … Hanson, R. R. (2020). Tensile strength and early healing of self‐locking and surgeon's knots. Veterinary Surgery, 49(8), 1580–1589. https://doi.org/10.1111/vsu.13497

Bond, A., Bottenfield, B. D., Dean, R. N., Adams, M. L., Zhao, J., Li, X. F., … Perkins, E. (2020). 3D Printed MEMS-Scale Vibration Isolators. Volume 7A: Dynamics, Vibration, and Control. Presented at the ASME 2020 International Mechanical Engineering Congress and Exposition. https://doi.org/10.1115/imece2020-24357

Tucker, A., & Perkins, E. (2020). Asphaltophones: Modeling, analysis, and experiment. The Journal of the Acoustical Society of America, 148(1), 236–242. https://doi.org/10.1121/10.0001575

Rhea, B. K., Harrison, R. C., Werner, F. T., Perkins, E., & Dean, R. N. (2020). Approximating an Exactly Solvable Chaotic Oscillator Using a Colpitts Oscillator Circuit. IEEE Transactions on Circuits and Systems II: Express Briefs, 1–1. https://doi.org/10.1109/tcsii.2020.3024147

Perkins, E. (2020). Vibratory Response Characteristics of High-Frequency Shape Memory Alloy Actuators. Journal of Vibration and Acoustics. Retrieved from https://asmedigitalcollection.asme.org/vibrationacoustics/article/142/1/011004/975366?casa_token=hjh0F6kLUvYAAAAA:v2exhZOXFfKRoVAmKj69YQCxz_xIesg3LnMpMw61mnRwoOpW6UMBoZS9Cy_Kou1CRShpCtGO

Silverberg, L. M., & Eischen, J. W. (2020). On a new field theory formulation and a space-time adjustment that predict the same precession of Mercury and the same bending of light as general relativity. PHYSICS ESSAYS, 33(4), 489–512. https://doi.org/10.4006/0836-1398-33.4.489

Firth, J. A., & Pankow, M. R. (2020). Minimal Unpowered Strain-Energy Deployment Mechanism for Rollable Spacecraft Booms: Ground Test. JOURNAL OF SPACECRAFT AND ROCKETS, Vol. 57, pp. 346–353. https://doi.org/10.2514/1.A34565

Edwards, J. R., & Nielsen, T. B. (2020, November). Mesh-Sequenced Realizations for Evaluation of Subgrid-Scale Models for Turbulent Combustion. AIAA JOURNAL, Vol. 58, pp. 4878–4892. https://doi.org/10.2514/1.J059217

Zhang, J., Ash, T., Huang, W., Smith, A., Huang, H.-Y., & Jensen, B. C. (2020, July 31). An Essential Protective Role for Cardiomyocyte Alpha1a-adrenergic Receptors in a Mouse Model of Myocardial Infarction. CIRCULATION RESEARCH, Vol. 127. https://doi.org/10.1161/res.127.suppl_1.408

Freydin, M., Levin, D., Dowell, E. H., Varigonda, S. V., & Narayanaswamy, V. (2020). Natural Frequencies of a Heated Plate: Theory and Experiment. AIAA JOURNAL, 58(11), 4969–4973. https://doi.org/10.2514/1.J059660

Yu, S., Yan, J., Li, H., Ding, R., Lall, A., Rabiei, A., & Bowen, P. (2020). Fatigue crack growth resistance of the austenitic stainless steel Alloy 709 at elevated temperatures. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9(6), 12955–12969. https://doi.org/10.1016/j.jmrt.2020.09.050

Elfering, K. H., & Granlund, K. O. (2020, November). Lift Equivalence and Cancellation for Airfoil Surge-Pitch-Plunge Oscillations. AIAA JOURNAL, Vol. 58, pp. 4629–4643. https://doi.org/10.2514/1.J059068

Pickles, J. D., & Narayanaswamy, V. (2020). Control of Fin Shock Induced Flow Separation Using Vortex Generators. AIAA JOURNAL, 58(11), 4794–4806. https://doi.org/10.2514/1.J059624

Song, R., Yao, S., Liu, Y., Wang, H., Dong, J., Zhu, Y., & Brendan T. O'Connor. (2020). Facile Approach to Fabricating Stretchable Organic Transistors with Laser-Patterned Ag Nanowire Electrodes. ACS APPLIED MATERIALS & INTERFACES, 12(45), 50675–50683. https://doi.org/10.1021/acsami.0c15339

Jia, Y., Ajayi, T. D., Wahls, B. H., Ramakrishnan, K. R., Ekkad, S., & Xu, C. (2020). Multifunctional Ceramic Composite System for Simultaneous Thermal Protection and Electromagnetic Interference Shielding for Carbon Fiber-Reinforced Polymer Composites. ACS APPLIED MATERIALS & INTERFACES, 12(52), 58005–58017. https://doi.org/10.1021/acsami.0c17361

Hackney, D., Goode, T., Seng, F., Pankow, M., Schultz, S., & Peters, K. (2020). Survivability of integrated fiber Bragg grating sensors in ballistic protection fabrics for high velocity impact testing. OPTICAL FIBER TECHNOLOGY, 60. https://doi.org/10.1016/j.yofte.2020.102356

Kim, J., & Roh, Y. (2020). Modeling and Design of a Rear-Mounted Underwater Projector Using Equivalent Circuits. SENSORS, 20(24). https://doi.org/10.3390/s20247085

Marx, J., Portanova, M., & Rabiei, A. (2020). Performance of Composite Metal Foam Armors against Various Threat Sizes. JOURNAL OF COMPOSITES SCIENCE, 4(4). https://doi.org/10.3390/jcs4040176

Garrard, K. P., Ekelof, M., Khodjaniyazova, S., Bagley, M. C., & Muddiman, D. C. (2020, December 2). A Versatile Platform for Mass Spectrometry Imaging of Arbitrary Spatial Patterns. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, Vol. 31, pp. 2547–2552. https://doi.org/10.1021/jasms.0c00128

Weisson, E. H., Fittipaldi, M., Concepcion, C. A., Pelaez, D., Grace, L., & Tse, D. T. (2020). Automated Noncontact Facial Topography Mapping, 3-Dimensional Printing, and Silicone Casting of Orbital Prosthesis. AMERICAN JOURNAL OF OPHTHALMOLOGY, 220, 27–36. https://doi.org/10.1016/j.ajo.2020.06.032

Awad, M. M., Attinger, D., Bejan, A., Beskok, A., Celata, G. P., Colin, S., … Weisensee, P. B. (2020, December 1). Professor Satish G. Kandlikar on His 70th Birthday. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol. 12. https://doi.org/10.1115/1.4048813

Poblete, F. R., Cui, Z., Liu, Y., & Zhu, Y. (2020). Stretching nanowires on a stretchable substrate: A method towards facile fracture testing and elastic strain engineering. EXTREME MECHANICS LETTERS, 41. https://doi.org/10.1016/j.eml.2020.101035

Kulkarni, N. A., & Kleinstreuer, C. (2020). High-temperature effects on the mucus layers in a realistic human upper airway model. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 163. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120467

Yu, A. C. H., Demi, L., Muller, M., & Zhou, Q. (2020, November). Ultrasound Imaging: A Silent Hero in COVID-19 and Lung Diagnostics. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, Vol. 67, pp. 2194–2196. https://doi.org/10.1109/TUFFC.2020.3031444

Mohanty, K., Roshankhah, R., Ulrich, M., & Muller, M. (2020). Lesion Imaging and Target Detection in Multiple Scattering (LITMUS) Media. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(11), 2281–2290. https://doi.org/10.1109/TUFFC.2020.2990704

Soman, R., Wee, J., Peters, K., & Ostachowicz, W. (2020). Optimization of sensor placement for guided waves based SHM using fiber Bragg grating sensors. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2020, Vol. 11379. https://doi.org/10.1117/12.2558393

Wee, J., Alexander, K., & Peters, K. (2020). Self-referencing ultrasound detection of fiber Bragg grating sensor remotely bonded at two locations. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2020, Vol. 11379. https://doi.org/10.1117/12.2559252

Yuan, F.-G., Zargar, S. A., Chen, Q., & Wang, S. (2020). Machine Learning for Structural Health Monitoring: Challenges and Opportunities. SENSORS AND SMART STRUCTURES TECHNOLOGIES FOR CIVIL, MECHANICAL, AND AEROSPACE SYSTEMS 2020, Vol. 11379. https://doi.org/10.1117/12.2561610

Wee, J., Hackney, D., Wells, B., Bradford, P. D., & Peters, K. (2020). Ultrasonic Lamb wave measurement sensitivity of aligned carbon nanotube coated fiber Bragg grating. JOURNAL OF PHYSICS-PHOTONICS, 2(1). https://doi.org/10.1088/2515-7647/ab525e

Islam, M. D., Liu, S., Boyd, D. A., Zhong, Y., Nahid, M. M., Henry, R., … Ryu, J. E. (2020). Enhanced mid-wavelength infrared refractive index of organically modified chalcogenide (ORMOCHALC) polymer nanocomposites with thermomechanical stability. OPTICAL MATERIALS, 108. https://doi.org/10.1016/j.optmat.2020.110197

Rock, C., Lara-Curzio, E., Ellis, B., Ledford, C., Leonard, D. N., Kannan, R., … Horn, T. (2020). Additive Manufacturing of Pure Mo and Mo plus TiC MMC Alloy by Electron Beam Powder Bed Fusion. JOM, 72(12), 4202–4213. https://doi.org/10.1007/s11837-020-04442-8

Mohanty, K., Karbalaeisadegh, Y., Blackwell, J. W., Ali, M. H., Masuodi, B., Egan, T., & Muller, M. (2020). In Vivo Assessment of Pulmonary Fibrosis and Pulmonary Edema in Rodents Using Ultrasound Multiple Scattering. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(11), 2274–2280. https://doi.org/10.1109/TUFFC.2020.3023611

Jia, Y., Ajayi, T. D., Ramakrishnan, K. R., Negi, A., Liu, J., Ekkad, S., & Xu, C. (2020). A skin layer made of cured polysilazane and yttria stabilized zirconia for enhanced thermal protection of carbon fiber reinforced polymers (CFRPs). Surface and Coatings Technology, 404, 126481. https://doi.org/10.1016/j.surfcoat.2020.126481

Fu, X., Chen, Y.-A., Shin, D.-H., Mehta, Y., Chen, I.-T., Barange, N., … So, F. (2020). Recovering cavity effects in corrugated organic light emitting diodes. OPTICS EXPRESS, 28(21), 32214–32225. https://doi.org/10.1364/OE.404412

Jia, Y., Ajayi, T. D., Roberts, M. A., Jr., Chung, C.-C., & Xu, C. (2020). Ultrahigh-Temperature Ceramic-Polymer-Derived SiOC Ceramic Composites for High-Performance Electromagnetic Interference Shielding. ACS APPLIED MATERIALS & INTERFACES, 12(41), 46254–46266. https://doi.org/10.1021/acsami.0c08479

Peng, C., Chen, M., Wang, H., Shen, J., & Jiang, X. (2020). P(VDF-TrFE) Thin-Film-Based Transducer for Under-Display Ultrasonic Fingerprint Sensing Applications. IEEE SENSORS JOURNAL, 20(19), 11221–11228. https://doi.org/10.1109/JSEN.2020.2997375

Du, J., Mohan, B., Sim, J., Fang, T., Chang, J., & Roberts, W. L. (2020). INFLUENCE OF FLASH BOILING ON SPRAY MORPHOLOGY USING A PROTOTYPE INJECTOR FOR GASOLINE COMPRESSION IGNITION (GCI) APPLICATION. ATOMIZATION AND SPRAYS, 30(5), 351–369. https://doi.org/10.1615/AtomizSpr.2020034561

Kuznetsov, I. A., & Kuznetsov, A. V. (2020). Modeling tau transport in the axon initial segment. MATHEMATICAL BIOSCIENCES, 329. https://doi.org/10.1016/j.mbs.2020.108468

Turpin, A. M., Chin, D., & Granlund, K. (2020, October). Supersonic Cavity Flow Subjected to Continuous and Transient Leading-Edge Blowing. AIAA JOURNAL, Vol. 58, pp. 4415–4425. https://doi.org/10.2514/1.J059267

Kirschmeier, B., Pash, G., Gianikos, Z., Medina, A., Gopalarathnam, A., & Bryant, M. (2020). Aeroelastic inverse: Estimation of aerodynamic loads during large amplitude limit cycle oscillations. JOURNAL OF FLUIDS AND STRUCTURES, 98. https://doi.org/10.1016/j.jfluidstructs.2020.103131

Rock, C., Vadlakonda, R., Figurskey, S., Ledford, C., West, H., Miller, V., … Horn, T. (2020). Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion. Additive Manufacturing, 35. https://doi.org/10.1016/j.addma.2020.101320

Kuznetsov, I. A., & Kuznetsov, A. V. (2020). How old are dense-core vesicles residing in en passant boutons: simulation of the mean age of dense-core vesicles in axonal arbours accounting for resident and transiting vesicle populations. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 476(2241). https://doi.org/10.1098/rspa.2020.0454

Jacuzzi, E., & Granlund, K. (2020). Heaving Inverted Wing in Extreme Ground Effect. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 142(11). https://doi.org/10.1115/1.4047804

Siddiqui, A., Naik, K., Cobb, M., Granlund, K., & Vermillion, C. (2020). Lab-Scale, Closed-Loop Experimental Characterization, Model Refinement, and Validation of a Hydrokinetic Energy-Harvesting Ocean Kite. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 142(11). https://doi.org/10.1115/1.4047825

Atay, S., Buckner, G., & Bryant, M. (2020). Dynamic Modeling for Bi-Modal, Rotary Wing, Rolling-Flying Vehicles. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 142(11). https://doi.org/10.1115/1.4047693

Stallrich, J., Islam, M. N., Staicu, A.-M., Crouch, D., Pan, L., & Huang, H. (2020). OPTIMAL EMG PLACEMENT FOR A ROBOTIC PROSTHESIS CONTROLLER WITH SEQUENTIAL, ADAPTIVE FUNCTIONAL ESTIMATION (SAFE). ANNALS OF APPLIED STATISTICS, 14(3), 1164–1181. https://doi.org/10.1214/20-AOAS1324

Feng, T., He, J., Rai, A., Hun, D., Liu, J., & Shrestha, S. S. (2020). Size Effects in the Thermal Conductivity of Amorphous Polymers. Physical Review Applied. https://doi.org/10.1103/PhysRevApplied.14.044023

Liu, J. (2020). Size Effects in the Thermal Conductivity of Amorphous Polymers. Physical Review Applied. https://doi.org/https://doi.org/10.1103/PhysRevApplied.14.044023

Kim, J., DeRuiter, R. M., Goel, L., Xu, Z., Jiang, X., & Dayton, P. A. (2020). A COMPARISON OF SONOTHROMBOLYSIS IN AGED CLOTS BETWEEN LOWBOILING-POINT PHASE-CHANGE NANODROPLETS AND MICROBUBBLES OF THE SAME COMPOSITION. ULTRASOUND IN MEDICINE AND BIOLOGY, 46(11), 3059–3068. https://doi.org/10.1016/j.ultrasmedbio.2020.07.008

Wu, S., Yao, S., Liu, Y., Hu, X., Huang, H. H., & Zhu, Y. (2020). Buckle-Delamination-Enabled Stretchable Silver Nanowire Conductors. ACS APPLIED MATERIALS & INTERFACES, 12(37), 41696–41703. https://doi.org/10.1021/acsami.0c09775

Sahoo, A., Zelenak, D., & Narayanaswamy, V. (2020). Pressure scaling of the collisional broadening parameters of Kr 4p(6)S(0)(1) ->-> 5p [3/2](2) transition. APPLIED OPTICS, 59(26), 7760–7769. https://doi.org/10.1364/AO.394932

Chen, C., Zhang, S. P., Mao, Z., Nama, N., Gu, Y., Huang, P.-H., … Huang, T. J. (2020, September 21). Three-dimensional numerical simulation and experimental investigation of boundary-driven streaming in surface acoustic wave microfluidics (vol 18, pg 3645, 2018). LAB ON A CHIP, Vol. 20, pp. 3469–3469. https://doi.org/10.1039/d0lc90090g

Kuznetsov, S., Pankow, M., Peters, K., & Huang, H.-Y. S. (2020). A structural-based computational model of tendon-bone insertion tissues. MATHEMATICAL BIOSCIENCES, 327. https://doi.org/10.1016/j.mbs.2020.108411

Long, D., & Ferguson, S. (2020). Studying Dynamic Change Probabilities and Their Role in Change Propagation. JOURNAL OF MECHANICAL DESIGN, 142(10). https://doi.org/10.1115/1.4046674

Kirschmeier, B. A., Gianikos, Z., Gopalarathnam, A., & Bryant, M. (2020). Amplitude Annihilation in Wake-Influenced Aeroelastic Limit-Cycle Oscillations. AIAA JOURNAL, 58(9), 4117–4127. https://doi.org/10.2514/1.J058942

Ji, J., Zhang, J., Wang, J., Huang, Q., Jiang, X., Zhang, W., … Li, S. (2020). Three-dimensional analyses of cells' positioning on the quadrupole-electrode microfluid chip considering the coupling effect of nDEP, ACEO, and ETF. BIOSENSORS & BIOELECTRONICS, 165. https://doi.org/10.1016/j.bios.2020.112398

Warren, J. M., Mazzoleni, A. P., & Hey, L. A. (2020). Development and Validation of a Computationally Efficient Finite Element Model of the Human Lumbar Spine: Application to Disc Degeneration. INTERNATIONAL JOURNAL OF SPINE SURGERY, 14(4), 502–510. https://doi.org/10.14444/7066

Li, B. M., Yildiz, O., Mills, A. C., Flewwellin, T. J., Bradford, P. D., & Jur, J. S. (2020). Iron-on carbon nanotube (CNT) thin films for biosensing E-Textile applications. CARBON, 168, 673–683. https://doi.org/10.1016/j.carbon.2020.06.057

Balar, N., Siddika, S., Kashani, S., Peng, Z., Rech, J. J., Ye, L., … Brendan T. O'Conner. (2020). Role of Secondary Thermal Relaxations in Conjugated Polymer Film Toughness. CHEMISTRY OF MATERIALS, 32(15), 6540–6549. https://doi.org/10.1021/acs.chemmater.0c01910

Yu, H., Kim, J., Kim, H., Barange, N., Jiang, X., & So, F. (2020). Direct Acoustic Imaging Using a Piezoelectric Organic Light-Emitting Diode. ACS APPLIED MATERIALS & INTERFACES, 12(32), 36409–36416. https://doi.org/10.1021/acsami.0c05615

Marx, J., & Rabiei, A. (2020). Study on the Microstructure and Compression of Composite Metal Foam Core Sandwich Panels. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 51(10), 5187–5197. https://doi.org/10.1007/s11661-020-05964-1

Ranade, R. (2020, May 17). DiscretizationNet: A Machine-Learning based solver for Navier-Stokes Equations using Finite Volume Discretization.

Rabiei, A., Portanova, M., Marx, J., Scott, C., & Schwandt, J. (2020). A Study on Puncture Resistance of Composite Metal Foam Core Sandwich Panels. ADVANCED ENGINEERING MATERIALS, 22(12). https://doi.org/10.1002/adem.202000693

Chilamkurti, Y. N., & Gould, R. D. (2020). CFD-DEM and PR-DNS studies of low-temperature densely packed beds. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 159. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120056

Ke, Y., Zhang, Q., Wang, T., Wang, S., Li, N., Lin, G., … Long, Y. (2020). Cephalopod-inspired versatile design based on plasmonic VO2 nanoparticle for energy-efficient mechano-thermochromic windows. NANO ENERGY, 73. https://doi.org/10.1016/j.nanoen.2020.104785

Cheng, G., Yin, S., Li, C., Chang, T.-H., Richter, G., Gao, H., & Zhu, Y. (2020). In-situ TEM study of dislocation interaction with twin boundary and retraction in twinned metallic nanowires. ACTA MATERIALIA, 196, 304–312. https://doi.org/10.1016/j.actamat.2020.06.055

Donndelinger, J. A., & Ferguson, S. M. (2020). [Review of Design for the Marketing Mix: The Past, Present, and Future of Market-Driven Engineering Design]. JOURNAL OF MECHANICAL DESIGN, 142(6). https://doi.org/10.1115/1.4045041

Cui, C., Yin, J., & Han, L.-H. (2020). Deciphering, Designing, and Realizing Self-Folding Biomimetic Microstructures Using a Mass-Spring Model and Inkjet-Printed, Self-Folding Hydrogels. ADVANCED FUNCTIONAL MATERIALS, 30(39). https://doi.org/10.1002/adfm.202003959

Jia, Y., Chowdhury, M. A. R., & Xu, C. (2020). Complex impedance spectra of polymer-derived SiC annealed at ultrahigh temperature. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(12), 6860–6868. https://doi.org/10.1111/jace.17395

Narsipur, S., Hosangadi, P., Gopalarathnam, A., & Edwards, J. R. (2020). Variation of leading-edge suction during stall for unsteady aerofoil motions. JOURNAL OF FLUID MECHANICS, 900. https://doi.org/10.1017/jfm.2020.467

Kim, H., Chang, W.-Y., Kim, T., & Jiang, X. (2020). Stress-Sensing Method via Laser-Generated Ultrasound Wave Using Candle Soot Nanoparticle Composite. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67(9), 1867–1876. https://doi.org/10.1109/TUFFC.2020.2989035

Borek, J., Groelke, B., Earnhardt, C., & Vermillion, C. (2020). Economic Optimal Control for Minimizing Fuel Consumption of Heavy-Duty Trucks in a Highway Environment. IEEE Transactions on Control Systems Technology, 28(5), 1652–1664. https://doi.org/10.1109/TCST.2019.2918472

Ledford, C., Tung, M., Rock, C., & Horn, T. (2020). Real time monitoring of electron emissions during electron beam powder bed fusion for arbitrary geometries and toolpaths. ADDITIVE MANUFACTURING, 34. https://doi.org/10.1016/j.addma.2020.101365

McFarland, D. C., Brynildsen, A. G., & Saul, K. R. (2020). Sensitivity of Neuromechanical Predictions to Choice of Glenohumeral Stability Modeling Approach. JOURNAL OF APPLIED BIOMECHANICS, 36(4), 249–258. https://doi.org/10.1123/jab.2019-0088

Chin, D., Turpin, A., & Granlund, K. (2020). Time-Dependent Aerodynamic Loads on Single and Tandem Stores in a Supersonic Cavity. JOURNAL OF AIRCRAFT, Vol. 57, pp. 702–714. https://doi.org/10.2514/1.C035749

Madhavan, S., Ramakrishnan, K. R., Singh, P., & Ekkad, S. (2020). Jet Impingement Heat Transfer Enhancement by U-Shaped Crossflow Diverters. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 12(4). https://doi.org/10.1115/1.4045514

Stewart, W., Weisler, W., Anderson, M., Bryant, M., & Peters, K. (2020). Dynamic Modeling of Passively Draining Structures for Aerial-Aquatic Unmanned Vehicles. IEEE JOURNAL OF OCEANIC ENGINEERING, 45(3), 840–850. https://doi.org/10.1109/JOE.2019.2898069

Metoyer, R., Chatterjee, P., Elfering, K., Bryant, M., Granlund, K., & Mazzoleni, A. (2020). Experimental analysis of dual coaxial turbines in skew. Ocean Engineering, 215, 107877. https://doi.org/10.1016/j.oceaneng.2020.107877

Pang, H., & Ngaile, G. (2020). Formulation of SiO2/oil nanolubricant for metal forming using hydrodynamic cavitation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 234(12), 1549–1558. https://doi.org/10.1177/0954405420933120

Jernigan, S. R., Osborne, J. A., & Buckner, G. D. (2020). Gastric artery embolization: studying the effects of catheter type and injection method on microsphere distributions within a benchtop arterial model. BIOMEDICAL ENGINEERING ONLINE, 19(1). https://doi.org/10.1186/s12938-020-00794-z

Goel, L., Wu, H., Kim, H., Zhang, B., Kim, J., Dayton, P. A., … Jiang, X. (2020). EXAMINING THE INFLUENCE OF LOW-DOSE TISSUE PLASMINOGEN ACTIVATOR ON MICROBUBBLE-MEDIATED FORWARD-VIEWING INTRAVASCULAR SONOTHROMBOLYSIS. ULTRASOUND IN MEDICINE AND BIOLOGY, 46(7), 1698–1706. https://doi.org/10.1016/j.ultrasmedbio.2020.03.012

Fu, X., Peng, C., Samal, M., Barange, N., Chen, Y.-A., Shin, D.-H., … So, F. (2020). Mode Dispersion in Photonic Crystal Organic Light-Emitting Diodes. ACS APPLIED ELECTRONIC MATERIALS, 2(6), 1759–1767. https://doi.org/10.1021/acsaelm.0c00326

Li, C., Cheng, G., Wang, H., & Zhu, Y. (2020). Microelectromechanical Systems for Nanomechanical Testing: Displacement- and Force-Controlled Tensile Testing with Feedback Control. EXPERIMENTAL MECHANICS, 60(7), 1005–1015. https://doi.org/10.1007/s11340-020-00619-z

Liu, J. (2020). In-Plane Thermoelectric Properties of Flexible and Room-Temperature-Doped Carbon Nanotube Films. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.0c00995

Gu, J., & Jing, Y. (2020). A modified mixed domain method for modeling acoustic wave propagation in strongly heterogeneous media. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 147(6), 4055–4068. https://doi.org/10.1121/10.0001454

Chi, Y., Tang, Y., Liu, H., & Yin, J. (2020). Leveraging Monostable and Bistable Pre-Curved Bilayer Actuators for High-Performance Multitask Soft Robots. ADVANCED MATERIALS TECHNOLOGIES, 5(9). https://doi.org/10.1002/admt.202000370

Sridharan, S., & Pankow, M. (2020). Performance evaluation of two progressive damage models for composite laminates under various speed impact loading. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 143. https://doi.org/10.1016/j.ijimpeng.2020.103615

Jia, Y., Ajayi, T. D., & Xu, C. (2020). Dielectric properties of polymer-derived ceramic reinforced with boron nitride nanotubes. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(10), 5731–5742. https://doi.org/10.1111/jace.17301

Seo, E. Y., & Ryu, J. E. (2020). Influence of Reflow Profile on Thermal Fatigue Behaviors of Solder Ball Joints. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 29(6), 4095–4104. https://doi.org/10.1007/s11665-020-04899-3

Tian, Y., Ge, H., Zhang, X.-J., Xu, X.-Y., Lu, M.-H., Jing, Y., & Chen, Y.-F. (2020). Acoustic Ghost Imaging in the Time Domain. PHYSICAL REVIEW APPLIED, 13(6). https://doi.org/10.1103/PhysRevApplied.13.064044

Yang, W., Peters, K., Christensen, K., Jakoby, B., Morris, S., Yacoot, A., & Iakovidis, D. (2020). Announcing the 2019 Measurement Science and Technology Outstanding Paper Awards. MEASUREMENT SCIENCE AND TECHNOLOGY, 31(8). https://doi.org/10.1088/1361-6501/ab7efb

Nelson, A. J., Hall, P. T., Saul, K. R., & Crouch, D. L. (2020). Effect of Mechanically Passive, Wearable Shoulder Exoskeletons on Muscle Output During Dynamic Upper Extremity Movements: A Computational Simulation Study. JOURNAL OF APPLIED BIOMECHANICS, 36(2), 59–67. https://doi.org/10.1123/jab.2018-0369

Du, J., Mohan, B., Sim, J., Fang, T., Chang, J., & Roberts, W. L. (2020). A comprehensive study of spray and combustion characteristics of a prototype injector for gasoline compression ignition (GCI) application. FUEL, 277. https://doi.org/10.1016/j.fuel.2020.118144

Zhang, Y., Yan, Y., Guo, J., Lu, T., Liu, J., Zhou, J., & Xu, X. (2020). Superior Thermal Dissipation in Graphene Electronic Device Through Novel Heat Path by Electron-Phonon Coupling. ES Energy & Environment, 8, 42–47. https://doi.org/10.30919/esee8c386

Zhang, Z., McNall, B., Kanagaraj, A. B., Park, J.-R., Ryu, J. E., & Choi, D. (2020). Electrochemical characterization of LiMn2O4 nanowires fabricated by sol-gel for lithium-ion rechargeable batteries. MATERIALS LETTERS, 273. https://doi.org/10.1016/j.matlet.2020.127923

Xiao, H., Luo, C., Huangfu, G., & Guo, Y. (2020). Boosting the Photocatalytic Ability of Bandgap Engineered (Na0.5Bi0.5)TiO3-BaTiO3 by N-Ni Codoping. JOURNAL OF PHYSICAL CHEMISTRY C, 124(22), 11810–11818. https://doi.org/10.1021/acs.jpcc.0c02542

Rao, V. N., & Eischen, J. W. (2020). Failure analysis of fretting fracture in frame rails of heavy duty trucks - Case study. ENGINEERING FAILURE ANALYSIS, 113. https://doi.org/10.1016/j.engfailanal.2020.104544

Sheu, B., & Jiang, X. (2020, June). Announcing IEEE Nanotechnology Magazine's New Editor-in-Chief and Co-Editor-in-Chief. IEEE NANOTECHNOLOGY MAGAZINE, Vol. 14, pp. 3–4. https://doi.org/10.1109/MNANO.2020.2980092

Kaur, I., Singh, P., & Ekkad, S. V. (2020). Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 149. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119221

Zhou, W., Yao, S., Wang, H., Du, Q. I., Ma, Y., & Zhu, Y. (2020). Gas-Permeable, Ultrathin, Stretchable Epidermal Electronics with Porous Electrodes. ACS NANO, 14(5), 5798–5805. https://doi.org/10.1021/acsnano.0c00906

Heng, L., Kim, J. S., Tu, J.-F., & Mun, S. D. (2020). Fabrication of precision meso-scale diameter ZrO2 ceramic bars using new magnetic pole designs in ultra-precision magnetic abrasive finishing. CERAMICS INTERNATIONAL, 46(11), 17335–17346. https://doi.org/10.1016/j.ceramint.2020.04.022

Kim, H., Wu, H., Cho, N., Zhong, P., Mahmood, K., Lyerly, H. K., & Jiang, X. (2020). Miniaturized Intracavitary Forward-Looking Ultrasound Transducer for Tissue Ablation. IEEE Transactions on Biomedical Engineering, 1–1. https://doi.org/10.1109/TBME.2019.2954524

Rao, F., Kuznetsov, A. V., & Jin, Y. (2020). Numerical Modeling of Momentum Dispersion in Porous Media Based on the Pore Scale Prevalence Hypothesis. TRANSPORT IN POROUS MEDIA, 133(2), 271–292. https://doi.org/10.1007/s11242-020-01423-y

Jenkins, T., & Bryant, M. (2020). Pennate actuators: force, contraction and stiffness. BIOINSPIRATION & BIOMIMETICS, 15(4). https://doi.org/10.1088/1748-3190/ab860f

Li, L., Chan, Y.-C., Ngaile, G., & Hassan, T. (2020). A novel gripper for multiaxial mechanical testing of microtubes at elevated temperatures. REVIEW OF SCIENTIFIC INSTRUMENTS, 91(5). https://doi.org/10.1063/5.0007150

Wang, Z., Qian, L., Jiang, Z., Xue, X., & Reddy, K. (2020). Vibration effects of standing surface acoustic wave for separating suspended particles in lubricating oil. AIP Advances, 10(4), 045013. https://doi.org/10.1063/5.0004018

Kim, S., Raj, A., Li, B., Dufek, E. J., Dickerson, C. C., Huang, H.-Y., … Pawar, G. M. (2020). Correlation of electrochemical and mechanical responses: Differential analysis of rechargeable lithium metal cells. JOURNAL OF POWER SOURCES, 463. https://doi.org/10.1016/j.jpowsour.2020.228180

Nandi, S., Mohanty, K., Nellenbach, K., Erb, M., Muller, M., & Brown, A. C. (2020). Ultrasound Enhanced Synthetic Platelet Therapy for Augmented Wound Repair. ACS BIOMATERIALS SCIENCE & ENGINEERING, 6(5), 3026–3036. https://doi.org/10.1021/acsbiomaterials.9b01976

Mehndiratta, M., Kayacan, E., Reyhanoglu, M., & Kayacan, E. (2020). Robust Tracking Control of Aerial Robots Via a Simple Learning Strategy-Based Feedback Linearization. IEEE Access, 8, 1653–1669. https://doi.org/10.1109/access.2019.2962512

Tang, Y., Chi, Y., Sun, J., Huang, T.-H., Maghsoudi, O. H., Spence, A., … Yin, J. (2020). Leveraging elastic instabilities for amplified performance: Spine-inspired high-speed and high-force soft robots. SCIENCE ADVANCES, 6(19). https://doi.org/10.1126/sciadv.aaz6912

Rabiei, A., Karimpour, K., Basu, D., & Janssens, M. (2020). Steel-steel composite metal foam in simulated pool fire testing. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 153. https://doi.org/10.1016/j.ijthermalsci.2020.106336

Du, H., Yousefian, O., Horn, T., & Muller, M. (2020). Evaluation of Structural Anisotropy in a Porous Titanium Medium Mimicking Trabecular Bone Structure Using Mode-Converted Ultrasonic Scattering. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(5), 1017–1024. https://doi.org/10.1109/TUFFC.2019.2963162

Guha, R. D., Idolor, O., & Grace, L. (2020). An atomistic simulation study investigating the effect of varying network structure and polarity in a moisture contaminated epoxy network. COMPUTATIONAL MATERIALS SCIENCE, 179. https://doi.org/10.1016/j.commatsci.2020.109683

Gianikos, Z. N., Kirschmeier, B. A., Gopalarathnam, A., & Bryant, M. (2020). Limit cycle characterization of an aeroelastic wing in a bluff body wake. JOURNAL OF FLUIDS AND STRUCTURES, 95(0). https://doi.org/10.1016/j.jfluidstructs.2020.102986

Chowdhury, M. A., Wang, K., Jia, Y., & Xu, C. (2020). Electrical Conductivity and Structural Evolution of Polymer Derived SiC Ceramics Pyrolyzed From 1200°C to 1800°C. Journal of Micro and Nano-Manufacturing, 8(2). https://doi.org/10.1115/1.4046191

Ahmed, S., Singh, P., & Ekkad, S. V. (2020). Three-Dimensional Transient Heat Conduction Equation Solution for Accurate Determination of Heat Transfer Coefficient. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 142(5). https://doi.org/10.1115/1.4044678

Chang, H.-Y., & Yuan, F.-G. (2020). Damage imaging in a stiffened curved composite sandwich panel with wavenumber index via Riesz transform. Structural Health Monitoring, 19(3), 902–916. https://doi.org/10.1177/1475921719858432

Kim, T., Cui, Z., Chang, W.-Y., Kim, H., Zhu, Y., & Jiang, X. (2020). Flexible 1–3 Composite Ultrasound Transducers With Silver-Nanowire-Based Stretchable Electrodes. IEEE Transactions on Industrial Electronics, 67(8), 6955–6962. https://doi.org/10.1109/TIE.2019.2937063

Shu, L., Ke, S., Fei, L., Huang, W., Wang, Z., Gong, J., … Catalan, G. (2020). Photoflexoelectric effect in halide perovskites. NATURE MATERIALS, 19(6), 605-+. https://doi.org/10.1038/s41563-020-0659-y

Demi, L., Egan, T., & Muller, M. (2020). [Review of Lung Ultrasound Imaging, a Technical Review]. APPLIED SCIENCES-BASEL, 10(2). https://doi.org/10.3390/app10020462

Bond, D. M., & Zikry, M. A. (2020). Effects of electron beam manufacturing induced defects on fracture in Inconel 718. ADDITIVE MANUFACTURING, 32. https://doi.org/10.1016/j.addma.2020.101059

Gasow, S., Lin, Z., Zhang, H. C., Kuznetsov, A. V., Avila, M., & Jin, Y. (2020). Effects of pore scale on the macroscopic properties of natural convection in porous media. JOURNAL OF FLUID MECHANICS, 891. https://doi.org/10.1017/jfm.2020.164

Goel, L., & Jiang, X. (2020). [Review of Advances in Sonothrombolysis Techniques Using Piezoelectric Transducers]. SENSORS, 20(5). https://doi.org/10.3390/s20051288

Tu, J. F., Rajule, N., & Mun, S. D. (2020). Novel Characterizations of Mechanical Properties for a Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting. C-JOURNAL OF CARBON RESEARCH, 6(1). https://doi.org/10.3390/c6010010

Gerard, N. J. R. K., & Jing, Y. (2020). Loss in acoustic metasurfaces: a blessing in disguise. MRS COMMUNICATIONS, 10(1), 32–41. https://doi.org/10.1557/mrc.2019.148

Kaur, I., Singh, P., & Ekkad, S. V. (2020). Thermal-Hydraulic Performance Enhancement by the Combination of Rectangular Winglet Pair and V-Shaped Dimples. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 12(2). https://doi.org/10.1115/1.4044169

Tonelli, A. E., & Edwards, J. F. (2020). Are poly(p-phenylene terephthalamide) (Kevlar (R)) and other liquid crystalline polymers conformationally rigid? POLYMER, 193. https://doi.org/10.1016/j.polymer.2020.122342

Pickles, J. D., & Narayanaswamy, V. (2020). Investigation of Surface Curvature Effects on Unseparated Fin Shock-Wave/Boundary-Layer Interactions. AIAA JOURNAL, 58(2), 770–778. https://doi.org/10.2514/1.J058596

Wang, L., Wu, Z., Badra, J. A., Roberts, W. L., & Fang, T. (2020). Soot characteristics of high-reactivity gasoline under compression-ignition conditions using a gasoline direct injection (GDI) piezoelectric fuel injector. FUEL, 265. https://doi.org/10.1016/j.fuel.2019.116931

Meng, L., Yang, X., Salcedo, E., Baek, D.-C., Ryu, J. E., Lu, Z., & Zhang, J. (2020). A Combined Modeling and Experimental Study of Tensile Properties of Additively Manufactured Polymeric Composite Materials. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. https://doi.org/10.1007/s11665-020-04746-5

Kim, H., & Yuan, F.-G. (2020). Adaptive signal decomposition and dispersion removal based on the matching pursuit algorithm using dispersion-based dictionary for enhancing damage imaging. ULTRASONICS, 103. https://doi.org/10.1016/j.ultras.2020.106087

Atay, S., Jenkins, T., Buckner, G., & Bryant, M. (2020). Energetic analysis and optimization of a bi-modal rolling-flying vehicle. INTERNATIONAL JOURNAL OF INTELLIGENT ROBOTICS AND APPLICATIONS, 4(1), 3–20. https://doi.org/10.1007/s41315-020-00119-2

Yang, R., Sen, P., O'Connor, B., & Kudenov, M. (2020). Optimization of an intrinsic coincident polarimeter and quantitative architectural comparison of different polarimeter techniques. OPTICAL ENGINEERING, 59(2). https://doi.org/10.1117/1.OE.59.2.024111

Vargas, L., Huang, H., Zhu, Y., & Hu, X. (2020). Object Shape and Surface Topology Recognition Using Tactile Feedback Evoked through Transcutaneous Nerve Stimulation. IEEE TRANSACTIONS ON HAPTICS, 13(1), 152–158. https://doi.org/10.1109/TOH.2020.2967366

Kim, K., Kim, T., Kim, J., & Jiang, X. (2020). A Face-Shear Mode Piezoelectric Array Sensor for Elasticity and Force Measurement. SENSORS, 20(3). https://doi.org/10.3390/s20030604

Xie, W.-B., Han, Z.-K., Wu, F., & Zhu, S. (2020). H-infinity observer-controller synthesis approach in low frequency for T-S fuzzy systems. IET CONTROL THEORY AND APPLICATIONS, 14(5), 738–749. https://doi.org/10.1049/iet-cta.2019.0242

Wu, Y., Zhang, X., Negi, A., He, J., Hu, G., Tian, S., & Liu, J. (2020). Synergistic Effects of Boron Nitride (BN) Nanosheets and Silver (Ag) Nanoparticles on Thermal Conductivity and Electrical Properties of Epoxy Nanocomposites. Polymers, 12(2), 426–439. https://doi.org/10.3390/polym12020426

Zaccardo, V. M., Miller, S. R., & Buckner, G. D. (2020). A large air gap magnetic levitator for intra-arterial positioning of a clinical microcatheter: design, fabrication, and preliminary experimental evaluation. INTERNATIONAL JOURNAL OF INTELLIGENT ROBOTICS AND APPLICATIONS, 4(1), 122–131. https://doi.org/10.1007/s41315-020-00124-5

Luo, Z., Zhang, X. A., Evans, B. A., & Chang, C.-H. (2020). Active Periodic Magnetic Nanostructures with High Aspect Ratio and Ultrahigh Pillar Density. ACS APPLIED MATERIALS & INTERFACES, 12(9), 11135–11143. https://doi.org/10.1021/acsami.9b18423

Weisler, W., Miller, S., Jernigan, S., Buckner, G., & Bryant, M. (2020). Design and testing of a centrifugal fluidic device for populating microarrays of spheroid cancer cell cultures. JOURNAL OF BIOLOGICAL ENGINEERING, 14(1). https://doi.org/10.1186/s13036-020-0228-6

Wang, F., & Fang, T. (2020). Retraction dynamics of water droplets after impacting upon solid surfaces from hydrophilic to superhydrophobic. PHYSICAL REVIEW FLUIDS, 5(3). https://doi.org/10.1103/PhysRevFluids.5.033604

Yin, S., Cheng, G., Zhu, Y., & Gao, H. (2020). Competition between shear localization and tensile detwinning in twinned nanowires. PHYSICAL REVIEW MATERIALS, 4(2). https://doi.org/10.1103/PhysRevMaterials.4.023603

Sarja, A., Singh, P., & Ekkad, S. (2020). Parallel rotation for negating Coriolis force effect on heat transfer. AERONAUTICAL JOURNAL, 124(1274), 581–596. https://doi.org/10.1017/aer.2020.1

Kakaley, D. E., Altieri, R. E., & Buckner, G. D. (2020). Non-contacting measurement of torque and axial translation in high-speed rotating shafts. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 138. https://doi.org/10.1016/j.ymssp.2019.106520

Watkins, M. F., Chilamkurti, Y. N., & Gould, R. D. (2020). Analytic Modeling of Heat Transfer to Vertical Dense Granular Flows. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 142(2). https://doi.org/10.1115/1.4045311

Banerjee, A., & Saveliev, A. (2020). Emission Characteristics of Heat Recirculating Porous Burners With High Temperature Energy Extraction. FRONTIERS IN CHEMISTRY, 8. https://doi.org/10.3389/fchem.2020.00067

Marx, J. C., Robbins, S. J., Grady, Z. A., Palmieri, F. L., Wohl, C. J., & Rabiei, A. (2020). Polymer infused composite metal foam as a potential aircraft leading edge material. APPLIED SURFACE SCIENCE, 505. https://doi.org/10.1016/j.apsusc.2019.144114

Lei, L., Seyitliyev, D., Stuard, S., Mendes, J., Dong, Q., Fu, X., … So, F. (2020). Efficient Energy Funneling in Quasi-2D Perovskites: From Light Emission to Lasing. ADVANCED MATERIALS, 32(16). https://doi.org/10.1002/adma.201906571

Mosey, A., Yue, L., Gaire, B., Ryu, J. E., & Cheng, R. (2020). Controlled short time large scale synthesis of magnetic cobalt nanoparticles on carbon nanotubes by flash annealing. JOURNAL OF APPLIED PHYSICS, 127(4). https://doi.org/10.1063/1.5131579

Powers, T. C., Silverberg, L. M., & Gopalarathnam, A. (2020). Artificial Lumbered Flight for Autonomous Soaring. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 43(3), 553–566. https://doi.org/10.2514/1.G004397

Li, C., Zhang, D., Cheng, G., & Zhu, Y. (2020). Microelectromechanical Systems for Nanomechanical Testing: Electrostatic Actuation and Capacitive Sensing for High-Strain-Rate Testing. EXPERIMENTAL MECHANICS, 60(3), 329–343. https://doi.org/10.1007/s11340-019-00565-5

Bai, H., Khodjaniyazova, S., Garrard, K. P., & Muddiman, D. (2020). Three-Dimensional Imaging with Infrared Matrix-Assisted Laser Desorption Electrospray Ionization Mass Spectrometry. JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY, 31(2), 292–297. https://doi.org/10.1021/jasms.9b00066

Ravishankar, E., Booth, R. E., Saravitz, C., Sederoff, H., Ade, H. W., & Brendan T. O'Connor. (2020). Achieving Net Zero Energy Greenhouses by Integrating Semitransparent Organic Solar Cells. JOULE, 4(2), 490–506. https://doi.org/10.1016/j.joule.2019.12.018

Yousefian, O., Balabokhin, A., & Tarbutton, J. (2020). Point-by-point prediction of cutting force in 3-axis CNC milling machines through voxel framework in digital manufacturing. JOURNAL OF INTELLIGENT MANUFACTURING, 31(1), 215–226. https://doi.org/10.1007/s10845-018-1442-7

Du, J., Mohan, B., Sim, J., Fang, T., & Roberts, W. L. (2020). Auto-ignition characteristics of high-reactivity gasoline fuel using a gasoline multi-hole injector. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 112. https://doi.org/10.1016/j.expthermflusci.2019.109993

Liu, J. (2020). Strong electron-phonon coupling induced anomalous phonon transport in ultrahigh temperature ceramics ZrB2 and TiB2. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119481

Kundu, P., Scroggins, J., & Ameen, M. M. (2020). A Novel In Situ Flamelet Tabulation Methodology for the Representative Interactive Flamelet Model. COMBUSTION SCIENCE AND TECHNOLOGY, 192(1), 1–25. https://doi.org/10.1080/00102202.2018.1539715

Liu, J. (2020). Efficiency improvement of liquid piston compressor using metal wire mesh for near-isothermal compressed air energy storage application. Journal of Energy Storage. https://doi.org/10.1016/j.est.2020.101226

Raj, A., Dickerson, C. C., Nagpure, S. C., Kim, S., Niu, C., Xiao, J., … Dufek, E. J. (2020). Communication-Pressure Evolution in Constrained Rechargeable Lithium-metal Pouch Cells. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 167(2). https://doi.org/10.1149/1945-7111/ab6439

Yang, R., Sen, P., Brendan T. O'Connor, & Kudenov, M. W. (2020). Optical crosstalk and off-axis modeling of an intrinsic coincident polarimeter. APPLIED OPTICS, 59(1), 156–164. https://doi.org/10.1364/AO.59.000156

Patil, V. C., Acharya, P., & Ro, P. I. (2020). Experimental investigation of water spray injection in liquid piston for near-isothermal compression. APPLIED ENERGY, 259. https://doi.org/10.1016/j.apenergy.2019.114182

Zhou, J., He, J., Xu, X., Nakayama, T., Wang, Y., & Liu, J. (2020). Thermal resistance network model for heat conduction of amorphous polymers. Physical Review Materials, 4(1). https://doi.org/10.1103/physrevmaterials.4.015601

Du, J., Mohan, B., Sim, J., Fang, T., & Roberts, W. L. (2020). Study of spray collapse phenomenon at flash boiling conditions using simultaneous front and side view imaging. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 147. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118824

Kim, H., Kim, T., Morrow, D., & Jiang, X. (2020). Stress Measurement of a Pressurized Vessel Using Ultrasonic Subsurface Longitudinal Wave With 1-3 Composite Transducers. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(1), 158–166. https://doi.org/10.1109/TUFFC.2019.2941133

Chowdhury, M. A. R., Wang, K., Jia, Y., & Xu, C. (2020). Semiconductor-conductor transition of pristine polymer-derived ceramics SiC pyrolyzed at temperature range from 1200 degrees C to 1800 degrees C. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 103(4), 2630–2642. https://doi.org/10.1111/jace.16961

Echekki, T. (2020). Application of deep artificial neural networks to multi-dimensional flamelet libraries and spray flames. International Journal of Engine Research. https://doi.org/10.1177/1468087419837770

Miles, J. S., & Echekki, T. (2020). A One-Dimensional Turbulence-Based Closure Model for Combustion LES. Combustion Science and Technology, 12, 1–34. https://doi.org/10.1080/00102202.2018.1556262

Luo, C., Chang, W.-Y., Gao, M., Chang, C.-H., Li, J., Viehland, D., … Jiang, X. (2020). Multi-layered domain morphology in relaxor single crystals with nano-patterned composite electrode. ACTA MATERIALIA, 182, 10–17. https://doi.org/10.1016/j.actamat.2019.10.017

Patil, V. C., & Ro, P. I. (2020). Experimental study of heat transfer enhancement in liquid piston compressor using aqueous foam. APPLIED THERMAL ENGINEERING, 164. https://doi.org/10.1016/j.applthermaleng.2019.114441

Fang, T. G., & Wang, F. J. (2020). Momentum and heat transfer of a special case of the unsteady stagnation-point flow. APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 41(1), 51–82. https://doi.org/10.1007/s10483-020-2556-9

Echekki, T. (2020). In the rain with and without an umbrella? The Reynolds transport theorem to the rescue. EUROPEAN JOURNAL OF PHYSICS, 41(1). https://doi.org/10.1088/1361-6404/ab4b62

Dhiman, P., & Huang, H.-Y. S. (2020). Dislocation based stresses during electrochemical cycling and phase transformation in lithium-ion batteries. COMPUTATIONAL MATERIALS SCIENCE, 171. https://doi.org/10.1016/j.commatsci.2019.109275

Yao, S., Ren, P., Song, R., Liu, Y., Huang, Q., Dong, J., … Zhu, Y. (2020). [Review of Nanomaterial-Enabled Flexible and Stretchable Sensing Systems: Processing, Integration, and Applications]. ADVANCED MATERIALS, 32(15). https://doi.org/10.1002/adma.201902343

Hollingsworth, J. A., Ravishankar, E., O'Connor, B., Johnson, J. X., & DeCarolis, J. F. (2020). Environmental and economic impacts of solar-powered integrated greenhouses. JOURNAL OF INDUSTRIAL ECOLOGY, 24(1). https://doi.org/10.1111/jiec.12934

Banerjee, A., Kundu, P., Gnatenko, V., Zelepouga, S., Wagner, J., Chudnovsky, Y., & Saveliev, A. (2020). NOx Minimization in Staged Combustion Using Rich Premixed Flame in Porous Media. COMBUSTION SCIENCE AND TECHNOLOGY, 192(9), 1633–1649. https://doi.org/10.1080/00102202.2019.1622532