Mechanical and Aerospace Engineering

Detailed Heat Transfer Distributions in Engine Similar Cooling Channels for a Turbine Rotor Blade With Different Rib Orientations

Journal of Turbomachinery, 135(1).

Comparison of flow and heat transfer distributions in a can combustor for radial and axial swirlers under cold flow conditions

ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 1, 873–879.

A novel optical technique for measuring the coefficient of restitution of microparticle impacts in a forced flowfield

Proceedings of the ASME Turbo Expo, 7(PARTS A AND B), 1–9.

Gas Turbine Heat Transfer and Cooling Technology

(pp. 1–844).

Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid Crystal Technique

Journal of Thermal Science and Engineering Applications, 4(1).

The Coupled Hydrodynamic and Structure Analysis of the Trans-Velocity Propellers in Inclined Shaft Conditions

Proceedings of the 26th Assian-Pacific Technical Exchange and Advisory Meeting on Marine Structure.

The Design of Control Force Measurement Device for Aircraft Quick Evaluation Flight Test

Proceedings of the 2nd International Conference on Computer Application and System Modeling.

Static Thrust Measurement for Propeller-driven Light Aircraft

Proceedings of the 2nd International Conference on Computer Application and System Modeling.

A Method for Correcting The Error in Indicated Normal Acceleration Due to GSensor Location

Proceedings of the 2nd International Conference on Computer Application and System Modeling.

Microstructural modeling of electrical behavior in CNT polymer composites

Materials Research Society Symposium Proceedings, 1420, 36–41.

High-speed full-spectrum interrogation of Fiber Bragg Grating sensor application in reducing sensor strain sensitivity

Proceedings of SPIE - The International Society for Optical Engineering, 8347.

Full-spectral interrogation of fiber bragg grating sensors for damage identification

International SAMPE Technical Conference. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863888345&partnerID=MN8TOARS

Investigation and exploration of a new indoor air filtration material

In Applied Mechanics and Materials (Vol. 182-183, pp. 208–212).

LabVIEW-based data acquisition system for loom performance assessment

In Applied Mechanics and Materials (Vol. 182-183, pp. 392–395).

Modeling Superhydrophobic Surfaces Comprised of Randomly Deposited Fibers or Particles

Bucher, T. M., Emami, B., & Tafreshi, H. V. (2012, May 14). Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Modeling Transport Phenomena in Anisotropic Fibrous Media

Tafreshi, H. V., & Bucher, T. M. (2012, May 14). Presented at the 4th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media (InterPore), West Lafayette, Indiana.

Microscale 2-D Modeling of Instantaneous Dust Loading of Fibrous Filters

Hosseini, S. A., & Tafreshi, H. V. (2012, June 4). Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Modeling Dust-Loading in Pleated Depth Filters

Fotovati, S., Tafreshi, H. V., & Pourdeyhimi, B. (2012, June 4). Presented at the American Filtration and Separation Society, Boca Raton, Florida.

Novel Method to Characterize Superhydrophobic Coatings

Bulletin of the American Physical Society, 57(17), 100.

Convective Air Mass Transfer in Submerged Superhydrophobic Surfaces

Bulletin of the American Physical Society, 57(17), 305.