Mechanical and Aerospace Engineering

Role of baffles on flow fields inside wet-lay mixing tanks and their potential influence on fiber dispersion

Textile Research Journal. https://publons.com/wos-op/publon/65200206/

Dimple Enhanced Heat Transfer in High Aspect Ratio Channels

Journal of Enhanced Heat Transfer, 10(4), 395–405.

Improved film cooling from cylindrical angled holes with triangular tabs: Effect of tab orientations

International Journal of Heat and Fluid Flow, 24(5), 657–668.

Impingement heat transfer under linearly stretched arrays of holes

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 91–100.

Effect of tip gap and squealer geometry on measured heat transfer over a HPT rotor blade tip

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 374(2), 11–21.

Effect of blade tip geometry on tip flow and heat transfer for a blade in a low speed cascade

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 A, 81–90.

Flat surface film cooling from cylindrical holes with discrete tabs

Journal of Thermophysics and Heat Transfer, 17(3), 304–312.

A material model for multi-scale analysis of textile composites

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1, 685–690.

A case study of prototyping methods and design for manufacture: electrostatic window blinds

Journal of Engineering Design, 15(1), 91–106.

The Role of Nozzle Design in Characteristics of the Hydroentangling Waterjets

16th Annual Conference on Liquid Atomization and Spray Systems (ILASS Americas). Presented at the 16th Annual Conference on Liquid Atomization and Spray Systems (ILASS Americas), Monterey, California.

The Role of Nozzle Design in Characteristics of the Hydroentangling Waterjets: Experimental Study

International Nonwovens Technical Conference (INTC 2003). Presented at the International Nonwovens Technical Conference (INTC 2003), Baltimore, Maryland.

A Study on Cavitation inside Hydroentangling Nozzles

International Nonwovens Technical Conference (INTC 2003). Presented at the International Nonwovens Technical Conference (INTC 2003), Baltimore, Maryland.

Gas-particle decoupling by nozzle-induced aerodynamic effects

American Filtration and Separation Society. Presented at the American Filtration and Separation Society, Reno, Nevada.

The structure of negatively curved spongy carbon

Diamond and Related Materials, 12(3-7), 768–773.

Simulating the flow dynamics in hydroentangling nozzles: Effect of cone angle and nozzle aspect ratio

Textile Research Journal, Vol. 73, pp. 700–704. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042731538&partnerID=MN8TOARS

Role of baffles on flow fields inside wet-lay mixing tanks and their pontential influence on fiber dispersion

Textile Research Journal, Vol. 73, pp. 575–582. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041339609&partnerID=MN8TOARS

Design of a fastener clinching process using FEM

Transaction of the North American Manufacturing Research Institution of SME, 31, 17–24.

Design and Analysis of Press and Shrink Fit Joints

Proceedings of the American Society for Precision Engineering Conference. Portland, OR.

Discontinuous feedback control of a 3 link planar PPR underactuated manipulator

Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228). Presented at the 40th Conference on Decision and Control, Orlando, FL.

Feedback control of an underactuated system with two unactuated degrees of freedom

Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228). Presented at the 40th Conference on Decision and Control, Orlando, FL.