College of Engineering
Displaying works 1 - 20 of 126 in total
Sorted by most recent date added to the index first, which may not be the same as publication date order.
2004 conference paper
Effects of tip gap film injection from plain and squealer blade tips
Proceedings of the ASME Turbo Expo 2004, 3, 419–427.
2004 journal article
Effect of squealer geometry on tip flow and heat transfer for a turbine blade in a low speed cascade
Journal of Heat Transfer, 126(4), 546–553.
2004 conference paper
Heat transfer study of a novel low-crossflow design for jet impingement
American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375(1), 583–588.
2004 journal article
Effect of tip gap and squealer geometry on detailed heat transfer measurements over a high pressure turbine rotor blade tip
Journal of Turbomachinery, 126(2), 221–228.
2004 conference paper
Effect of jet pulsation and duty cycle on film cooling from a single jet on a leading edge model
American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 375(1), 575–582.
2004 journal article
Effect of blade tip geometry on tip flow and heat transfer for a blade in a low-speed cascade
Journal of Turbomachinery, 126(1), 130–138.
2004 conference paper
Combination of impingement and trip strips for combustor liner backside cooling
Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, 3, 179–185.
2004 conference paper
A transient infrared thermography method for simultaneous film cooling effectiveness and heat transfer coefficient measurements from a single test
Proceedings of the ASME Turbo Expo 2004, 3, 999–1005.
2004 journal article
A transient infrared thermography method for simultaneous film cooling effectiveness and heat transfer coefficient measurements from a single test
Journal of Turbomachinery, 126(4), 597–603.
2004 conference paper
Failure modes and grain-boundary effects in polycrystalline materials
Materials Research Society Symposium - Proceedings, 819, 21–26.
2004 conference paper
Failure identification methodology for woven composites incorporating sensor degradation
American Society of Mechanical Engineers, Materials Division (Publication) MD, 99, 31–40.
2004 journal article
Erratum: Evolution of failure mechanisms in 2D and 3D woven composite systems under quasi-static perforation (Journal of Composite Materials, 37, 18, (1651-1674) DOI: 10.1177/0021998304042170)
Journal of Composite Materials, 38(6), 535.
2004 conference paper
Demonstration of failure identification methodology incorporating sensor degradation
Proceedings of SPIE - The International Society for Optical Engineering, 5391, 107–116.
2004 conference paper
In-plane and Through-plane Liquid Flow Simulation in Nonwoven Glass Fiber Mats
International Nonwovens Technical Conference (INTC 2004). Presented at the International Nonwovens Technical Conference (INTC 2004), Toronto, Ontario, Canada.
Event: International Nonwovens Technical Conference (INTC 2004) at Toronto, Ontario, Canada on September 20-23, 2004
2004 conference paper
A Study on Hydroentangling Impact Force
International Nonwovens Technical Conference (INTC 2004). Presented at the International Nonwovens Technical Conference (INTC 2004), Toronto, Ontario, Canada.
Event: International Nonwovens Technical Conference (INTC 2004) at Toronto, Ontario, Canada on September 20-23, 2004
2004 conference paper
Modeling Particle Filtration by Glass Fiber Filters
The Fiber Society Spring Symposium. Presented at the Fiber Society Spring Symposium, St. Louis, Missouri.
Event: Fiber Society Spring Symposium at St. Louis, Missouri on June 17-20, 2004
2004 conference paper
Modeling Submicron Particle Filtration by Virtual Glass Fiber Mats
Advances in Filtration & Separations Media. Presented at the Advances in Filtration & Separations Media, Baltimore, Maryland.
Event: Advances in Filtration & Separations Media at Baltimore, Maryland on November 14-16, 2004
2004 magazine article
Cavitation and Hydraulic Flip
Fluent News, 13(1), 38.
2004 article
Simulating cavitation and hydraulic flip inside hydroentangling nozzles
Textile Research Journal, Vol. 74, pp. 359–364. http://www.scopus.com/inward/record.url?eid=2-s2.0-0345722190&partnerID=MN8TOARS
2004 conference paper
Optimal Pick-up Locations for Transport and Handling of Limp Materials
Proceedings of the Eighth Pan American Congress of Applied Mechanics. Presented at the Eighth Pan American Congress of Applied Mechanics, Havana, Cuba.
Event: Eighth Pan American Congress of Applied Mechanics at Havana, Cuba on January 5-9, 2004