Mechanical and Aerospace Engineering

Works Published in 2005

search works

Displaying works 1 - 20 of 131 in total

Sorted by most recent date added to the index first, which may not be the same as publication date order.

2005 conference paper

Simulations of dimensional effects in solid oxide fuel cells

Proceedings of the ASME Summer Heat Transfer Conference, 4, 11–16.

By: A. Mahmud Hasan*, S. Ekkad* & P. Mensah*

Contributors: A. Mahmud Hasan*, S. Ekkad* & P. Mensah*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: July 26, 2023

2005 conference paper

Film cooling measurements for novel hole configurations

Proceedings of the ASME Summer Heat Transfer Conference, 3, 59–66.

By: Y. Lu*, D. Fauchcaux & S. Ekkad*

Contributors: Y. Lu*, D. Fauchcaux & S. Ekkad*

Source: ORCID
Added: July 26, 2023

2005 conference paper

The effects of feeding configurations to water flooding and general performance of a proton exchange membrane fuel cell

American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES, 45, 429–435.

By: A. Mahmud Hasan*, S. Guo* & S. Ekkad*

Contributors: A. Mahmud Hasan*, S. Guo* & S. Ekkad*

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: July 26, 2023

2005 journal article

Impingement heat transfer, part II: Effect of streamwise pressure gradient

Journal of Thermophysics and Heat Transfer, 19(1), 66–71.

By: R. Hebert*, S. Ekkad*, L. Gao* & R. Bunker*

Contributors: R. Hebert*, S. Ekkad*, L. Gao* & R. Bunker*

Source: ORCID
Added: July 26, 2023

2005 journal article

Impingement heat transfer, part I: Linearly stretched arrays of holes

Journal of Thermophysics and Heat Transfer, 19(1), 57–65.

By: L. Gao*, S. Ekkad* & R. Bunker*

Contributors: L. Gao*, S. Ekkad* & R. Bunker*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: July 26, 2023

2005 conference paper

Film cooling from a row of holes embedded in transverse slots

Proceedings of the ASME Turbo Expo, 3 PART A, 585–592.

Contributors: Y. Lu*, H. Nasir* & S. Ekkad*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: July 26, 2023

2005 conference paper

CFD for jet impingement heat transfer with single jets and arrays

Proceedings of the ASME Turbo Expo, 3 PART A, 359–373.

By: M. Ibrahim*, B. Kochuparambil*, S. Ekkad* & T. Simon*

Contributors: M. Ibrahim*, B. Kochuparambil*, S. Ekkad* & T. Simon*

Source: ORCID
Added: July 26, 2023

2005 conference paper

Effect of tip and pressure side coolant injection on heat transfer distributions for a plane and recessed tip

Proceedings of the ASME Turbo Expo, 3 PART A, 573–584.

By: H. Nasir*, S. Ekkad* & R. Bunker*

Contributors: H. Nasir*, S. Ekkad* & R. Bunker*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Source: ORCID
Added: July 26, 2023

2005 conference paper

Radiation and cladding modes as independent measurements of Bragg grating sensor integrity

Proceedings of SPIE - The International Society for Optical Engineering, 5758, 440–450.

By: M. Prabhugoud n, J. Pearson n, K. Peters n & M. Zikry n

Contributors: M. Prabhugoud n, J. Pearson n, K. Peters n & M. Zikry n

Source: ORCID
Added: April 30, 2023

2005 conference paper

Failure and damage identification in woven composites with fiber Bragg grating sensors

Proceedings of SPIE - The International Society for Optical Engineering, 5765(PART 1), 540–551.

By: J. Pearson n, M. Prabhugoud n, M. Zikry n, K. Peters n, M. Sitar n & L. Davis n

Contributors: J. Pearson n, M. Prabhugoud n, M. Zikry n, K. Peters n, M. Sitar n & L. Davis n

Source: ORCID
Added: April 30, 2023

2005 journal article

Theme issue on modeling of metal forming processes

Arabian Journal for Science and Engineering, 30(1 C). http://www.scopus.com/inward/record.url?eid=2-s2.0-32544458475&partnerID=MN8TOARS

By: H. Badr, A. M.Arif, A. Sheikh, A. Shuaib, Z. Khan, A. Khan, A. Tseng, M. Zikry

Contributors: H. Badr, A. M.Arif, A. Sheikh, A. Shuaib, Z. Khan, A. Khan, A. Tseng, M. Zikry

Source: ORCID
Added: April 30, 2023

2005 conference paper

Modeling of nanoindentation and microstructural ductile behavior in metallic material systems

Materials Research Society Symposium Proceedings, 841, 317–322. http://www.scopus.com/inward/record.url?eid=2-s2.0-23844433619&partnerID=MN8TOARS

By: J. Ma, W. Ashmawi, M. Zikry, D. Schall & D. Brenner

Contributors: J. Ma, W. Ashmawi, M. Zikry, D. Schall & D. Brenner

Source: ORCID
Added: April 30, 2023

2005 conference paper

Damage progression identification in woven composites with fiber bragg grating sensors

American Society of Mechanical Engineers, Materials Division (Publication) MD, 100 MD, 49–57.

By: J. Pearson n, M. Prabhugoud n, M. Zikry n & K. Peters n

Contributors: J. Pearson n, M. Prabhugoud n, M. Zikry n & K. Peters n

Source: ORCID
Added: April 30, 2023

2005 conference paper

A Study on Hydroentangling Waterjets

International Nonwoven Technical Conference (INTC 2005). Presented at the International Nonwoven Technical Conference (INTC 2005), St. Louis, Missouri.

By: N. Anantharamaiah, H. Tafreshi & B. Pourdeyhimi

Event: International Nonwoven Technical Conference (INTC 2005) at St. Louis, Missouri on September 19-22, 2005

Source: NC State University Libraries
Added: September 20, 2022

2005 conference paper

Water Flow Simulation in Nonwovens Made of Hydrophilic and Non-hydrophilic Fibers

Belt-wide Cotton Conference. Presented at the Belt-wide Cotton Conference, New Orleans, Louisiana.

By: H. Tafreshi, B. Maze & B. Pourdeyhimi

Event: Belt-wide Cotton Conference at New Orleans, Louisiana on January 6-7, 2005

Source: NC State University Libraries
Added: September 20, 2022

2005 article proceedings

FRACTAL GROWTH OF CARBON SCHWARZITES

Presented at the Proceedings of the 31st Workshop of the International School of Solid State Physics.

Event: Proceedings of the 31st Workshop of the International School of Solid State Physics

Sources: Crossref, NC State University Libraries, ORCID
Added: September 11, 2022

2005 chapter

Near-Net shape forging and new development

In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications.

By: G. Ngaile* & M. Shirgaokar

Ed(s): T. Altan, G. Ngaile* & G. Shen

Source: NC State University Libraries
Added: December 26, 2021

2005 chapter

Process Modeling in Impression-Die Forging Using Finite-Element Analysis

In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications.

By: G. Ngaile*, M. Shirgaokar & G. Shen

Ed(s): T. Altan, G. Ngaile* & G. Shen

Source: NC State University Libraries
Added: December 26, 2021

2005 chapter

Friction and Lubrication

In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications.

By: G. Ngaile* & M. Gariety

Ed(s): T. Altan, G. Ngaile* & G. Shen

Source: NC State University Libraries
Added: December 26, 2021

2005 chapter

Plastic Deformation: Complex state of stress and flow rules

In T. Altan, G. Ngaile, & G. Shen (Eds.), Cold and Hot Forging: Fundamentals and Applications.

By: G. Ngaile*

Ed(s): T. Altan, G. Ngaile* & G. Shen

Source: NC State University Libraries
Added: December 26, 2021

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.