Mechanical & Aerospace Engineering

Calculation of Convective Heat Transfer Coefficient Using a Semi-infinite Solid Assumption

In M. Kutz (Ed.), Heat-transfer calculations. McGraw-Hill.

Generation of plasma induced flow actuation by DC glow-like discharge in a supersonic flow

Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting, 3, 2042–2051.

Jet impingement heat transfer visualization using a steady state liquid crystal method

Journal of Heat Transfer, 128(8), 738.

Film cooling predictions for cratered cylindrical inclined holes

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD.

Film cooling measurements for novel hole configurations

Journal of Heat Transfer, 128(8), 737.

Corrugated wall jet impingement geometry for combustor liner backside cooling

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD.

Predictions of film cooling from cylindrical holes embedded in trenches

Collection of Technical Papers - 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference Proceedings, 2, 1361–1369. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845532553&partnerID=MN8TOARS

Influence of hole angle and shaping on leading edge showerhead film cooling

Proceedings of the ASME Turbo Expo, 3 PART A, 375–382.

Effect of jet pulsation and duty cycle on film cooling from a single jet on a leading edge model

Journal of Turbomachinery, 128(3), 564–571.

Simulation and Analysis of Unbonded Nonwoven Fibrous Structures

Journal of Engineered Fibers and Fabrics, 1(2), 155892500600100.

Inelastic behavior and grain-boundary effects in polycrystalline materials

Materials Research Society Symposium Proceedings, 978, 333–338.

In-situ failure identification in woven composites throughout impact using fiber bragg grating sensors

Proceedings of SPIE - The International Society for Optical Engineering, 6174 II.

Microstructural behavior and failure of FCC crystalline aggregates

Materials Research Society Symposium Proceedings, 976, 78–83.

Local strain characterization on strained-Si/SiGe heterostructures with convergent beam electron diffraction and finite element simulation

ECS Transactions, 3(7), 333–338.

In-situ failure identification in woven composites throughout impact

American Society of Mechanical Engineers, Materials Division (Publication) MD. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920632313&partnerID=MN8TOARS

Computational modeling and design of adaptive thin-film composite coatings

Materials Research Society Symposium Proceedings, 977, 85–90.

Nanoparticle Filtration by Virtual Nonwoven Media

Wang, Q., Maze, B., Tafreshi, H. V., & Pourdeyhimi, B. (2006, May 8). Presented at the American Filtration & Separations Society, Chicago, Illinois.

Predicting Inlet Roundness of Hydroentangling Nozzles Using CFD Simulations

International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.

Permeability of Highly Dense Nonwoven Fabrics

International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.

The Role of Waterjet Curtain in Modifying the Jet Streaks in Hydroentangling

International Nonwoven Technical Conference (INTC 2006). Presented at the International Nonwoven Technical Conference (INTC 2006), Houston, Texas.