Mechanical and Aerospace Engineering

Upconverting nanophosphors for high temperature applications

Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011, 1, 429–432. http://www.scopus.com/inward/record.url?eid=2-s2.0-81455133723&partnerID=MN8TOARS

Kr-PLIF for scalar imaging in supersonic flows

Optics Letters, 36(21), 4185–4187.

Prediction and validation of performance of an entrained flow gasifier model

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 4(PARTS A AND B), 1609–1617.

Film-cooling performance of anti-vortex hole on a flat plate

ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Experimental and numerical investigation of convective heat transfer in a gas turbine can combustor

Journal of Turbomachinery, 133(1).

Study of Flow and Convective Heat Transfer in a Simulated Scaled Up Low Emission Annular Combustor

Journal of Thermal Science and Engineering Applications, 3(3).

Performance of tripod antivortex injection holes on vane suction side film cooling

47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2011. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880695195&partnerID=MN8TOARS

Optimized impingement configurations for double wall cooling applications

Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1535–1543.

Investigation of effect of end wall contouring methods on a transonic turbine blade passage

Proceedings of the ASME Turbo Expo, 7(PARTS A, B, AND C), 523–534.

Heat transfer distribution of various rib geometries for developing flow at high rotation numbers

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 10(PARTS A AND B), 1039–1047.

Experimental validation of syngas composition of an entrained flow gasifier model under different operating conditions

28th Annual International Pittsburgh Coal Conference 2011, PCC 2011, 2, 870–878. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877599974&partnerID=MN8TOARS

Effects of Rotation on jet impingement channel heat transfer

Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1269–1278.

Effect of turbine airfoil shape on aerodynamic losses for turbine airfoils operating under transonic conditions

Proceedings of the ASME Turbo Expo, 7(PARTS A, B, AND C), 511–521.

Effect of airfoil shape and turning angle on turbine airfoil aerodynamic performance at transonic conditions

ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 6(PARTS A AND B), 1199–1208.

Detailed heat transfer measurements inside rotating ribbed channels using the transient liquid crystal technique

ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011.

Detailed heat transfer distributions in engine similar cooling channels for a turbine rotor blade with different rib orientations

Proceedings of the ASME Turbo Expo, 5(PARTS A AND B), 1109–1116.

A Comparison Study between ALE and SPH for Yacht Structure Design under Slamming Impact Loads

Abaqus Taiwan Users’ Conference.

95' Planning Yacht Structure Strength and Stiffness Analysis

Abaqus Taiwan Users’ Conference.

Microstructural modeling of failure modes in martensitic steel alloys

Materials Research Society Symposium Proceedings, 1296, 56–61.

Tunneling effects and electrical conductivity of CNT polymer composites

Materials Research Society Symposium Proceedings, 1304, 50–56.