Mechanical and Aerospace Engineering

Salinity effects on the degree of hydrophobicity and longevity for superhydrophobic fibrous coatings

Journal of Applied Polymer Science.

A MRI-Guided Concentric Tube Continuum Robot with Piezoelectric Actuation: A Feasibility Study

IEEE International Conference on Robotics and Automation.

Control of a shock/boundary-layer interaction by using a pulsed-plasma jet actuator

AIAA Journal, 50(1), 246–249.

Impingement-based high performance cooling configurations for automotive power converters

International Journal of Heat and Mass Transfer, 55(4), 834–847.

Effect of partial 3-dimensional pin fin geometry for heat transfer enhancement in high aspect ratio channels

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7(PARTS A, B, C, D), 1747–1754.

Effect of breakout angle on tripod injection hole geometries on flat plate film cooling

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7(PARTS A, B, C, D), 1995–2002.

The performance of fan-shaped hole film cooling on a gas turbine blade at transonic conditon with high freestream turbulence

50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Sand transport in a two pass internal cooling duct with rib turbulators

ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 1, 727–735.

Performance of tripod antivortex injection holes on vane film cooling

ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 1, 745–755.

Optimization of low jet-to-target spacing ratio for double wall impingement cooling applications

50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Measurement of aerodynamic losses for turbine airfoil cascades with varying pitch, operating under transonic conditions

Proceedings of the ASME Turbo Expo, 8(PARTS A, B, AND C), 1081–1088.

High efficiency minichannel and mini-impingement cooling systems for hybrid electric vehicle electronics

ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012, 669–679.

Heat transfer enhancement in narrow diverging channels

Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), 185–191.

Heat exchanger design for waste heat recovery from automobile exhaust using thermoelectric generators

50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

Grid-zone particle hydrodynamics and solid circulation in a multiple jet fluidized bed

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2, 55–64.

Experimental validation of temperature distributions across a heat exchanger for a thermoelectric generator

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 7(PARTS A, B, C, D), 1755–1760.

Effects of Rotation on Heat Transfer for a Single Row Jet Impingement Array With Crossflow

Journal of Heat Transfer, 134(8).

Effect of rotation on jet impingement heat transfer for various jet configurations

ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, 1, 717–726.

Effect of endwall contouring on a transonic turbine blade passage: Part 2 - Heat transfer performance

Proceedings of the ASME Turbo Expo, 4(PARTS A AND B), 151–161.

Effect of endwall contouring on a transonic turbine blade passage: Part 1 - Aerodynamic performance

Proceedings of the ASME Turbo Expo, 8(PARTS A, B, AND C), 1089–1098.