Mechanical and Aerospace Engineering

Effect of Rotation on Detailed Heat Transfer Distribution for Various Rib Geometries in Developing Channel Flow

Journal of Heat Transfer, 136(1).

Study of Microparticle Rebound Characteristics Under High Temperature Conditions

Journal of Engineering for Gas Turbines and Power, 136(1).

Study of microparticle rebound characteristics under high temperature conditions

Proceedings of the ASME Turbo Expo, 2.

Heat transfer in multiple parallel high aspect ratio ducts with triangular trench enhancement features

ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3.

Heat Transfer Enhancement in Narrow Diverging Channels

Journal of Turbomachinery, 135(4).

Comparison of Flow and Heat Transfer Distributions in a Can Combustor for Radial and Axial Swirlers Under Cold Flow Conditions

Journal of Thermal Science and Engineering Applications, 5(3).

Tripod hole geometry performance for a vane suction surface near throat location

Proceedings of the ASME Turbo Expo, 3.

Thermo-mechanical analysis of various film cooling hole geometries

ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3.

Numerical modeling of fluid flow and thermal behavior in geothermal heat exchangers

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 6 B.

Multi-Layer Mini-Channel and Ribbed Mini-Channel Based High Performance Cooling Configurations for Automotive Inverters—Part A: Design and Evaluation

Journal of Thermal Science and Engineering Applications, 5(3).

Foreword

Journal of Heat Transfer, 135(6).

Film-Cooling Performance of Antivortex Hole on a Flat Plate

Journal of Turbomachinery, 135(6).

Experimental investigation of heat transfer across a thermoelectric generator for waste heat recovery from automobile exhaust

ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 1.

Experimental and computational evaluation of flow characteristics for advanced film cooling hole geometries

ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3.

Effect of upstream purge slot on a transonic turbine blade passage: Part 2 - Heat transfer performance

Proceedings of the ASME Turbo Expo, 3.

Effect of upstream purge slot on a transonic turbine blade passage: Part 1 - Aerodynamic performance

Proceedings of the ASME Turbo Expo, 3.

Comparison of data processing techniques for convective heat transfer measurements in a transient transonic hot wind tunnel

ASME 2013 Gas Turbine India Conference, GTINDIA 2013.

A review of hole geometry and coolant density effect on film cooling

ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013, 3.

75th Anniversary Special Issues

Journal of Thermal Science and Engineering Applications, 5(2), 020301.

Test capabilities in the CCAPS/CSDL augmentor development facility

51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013.