Mechanical and Aerospace Engineering

Experimental investigation into shock induced corner boundary layer separation

45th AIAA Fluid Dynamics Conference.

Global features of flame stabilization in turbulent non-premixed jet flames in vitiated coflow

45th AIAA Fluid Dynamics Conference, 1–13.

Composition-independent temperature and pressure measurements using lineshape information

46th AIAA Plasmadynamics and Lasers Conference. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960517327&partnerID=MN8TOARS

Evaluation of Multilouvered-Fin-Based Heat Exchangers for Automobile Exhaust Energy Harvesting Systems

Journal of Thermophysics and Heat Transfer, 29(4), 785–794.

Effect of downstream contraction on liner heat transfer in a gas turbine combustor swirl flow

ASME 2015 Gas Turbine India Conference, GTINDIA 2015.

A diagnostic technique for particle characterization using laser light extinction

Proceedings of the ASME Turbo Expo, 6.

A REVIEW OF HOLE GEOMETRY AND COOLANT DENSITY EFFECT ON FILM COOLING

Frontiers in Heat and Mass Transfer, 6(1).

A Novel Transient Technique to Determine Recovery Temperature, Heat Transfer Coefficient, and Film Cooling Effectiveness Simultaneously in a Transonic Turbine Cascade

Journal of Thermal Science and Engineering Applications, 7(1).

Separation of radiative and convective wall heat fluxes using thermal infrared measurements applied to flame impingement

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8A-2015.

Numerical investigation of effect of geometry changes in a model combustor on swirl dominated flow and heat transfer

Proceedings of the ASME Turbo Expo, 5C.

Influence of rotation on heat transfer in a two-pass channel with impingement under high reynolds number

Proceedings of the ASME Turbo Expo, 5A.

Film cooling performance of tripod holes on the Endwall upstream of a first stage nozzle guide vane

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2015.

Experimental study of heat transfer augmentation in high aspectratio channels featuring different dimple configurations

Proceedings of the ASME Turbo Expo, 5A.

Effect of longitudinal vortex generator location on thermoelectric-hydraulic performance of a single stage integrated thermoelectric power generator

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2015.

Effect of Temperature on Microparticle Rebound Characteristics at Constant Impact Velocity—Part II

Journal of Engineering for Gas Turbines and Power, 137(11).

Effect of Temperature on Microparticle Rebound Characteristics at Constant Impact Velocity—Part I

Journal of Engineering for Gas Turbines and Power, 137(11).

Combustor heat shield impingement cooling and its effect on liner convective heat transfer for a model annular combustor with radial swirlers

Proceedings of the ASME Turbo Expo, 5C.

Modeling and predicting the mechanical strength and stability of DNA-modified gold nanoparticle systems

Journal of Computational and Theoretical Nanoscience, 12(11), 4539–4548.

Microstructural behavior and fracture in crystalline materials: Overview

In Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (pp. 419–452).

Identifying and controlling the behavior of gold nanoparticle-DNA superlattice systems

Journal of Computational and Theoretical Nanoscience, 12(8), 1761–1769.